/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/ /*** This file is part of systemd. Copyright (C) 2014 David Herrmann systemd is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see . ***/ /* * Terminal Screens * The term_screen layer implements the terminal-side. It handles all commands * returned by the seq-parser and applies them to its own pages. * * While there are a lot of legacy control-sequences, we only support a small * subset. There is no reason to implement unused codes like horizontal * scrolling. * If you implement new commands, make sure to document them properly. * * Standards: * ECMA-48 * ANSI X3.64 * ISO/IEC 6429 * References: * http://www.vt100.net/emu/ctrlseq_dec.html * http://www.vt100.net/docs/vt100-ug/chapter3.html * http://www.vt100.net/docs/vt510-rm/chapter4 * http://www.vt100.net/docs/vt510-rm/contents * http://invisible-island.net/xterm/ctlseqs/ctlseqs.html * ASCII * http://en.wikipedia.org/wiki/C0_and_C1_control_codes * https://en.wikipedia.org/wiki/ANSI_color */ #include #include #include #include #include "macro.h" #include "term-internal.h" #include "util.h" int term_screen_new(term_screen **out, term_screen_write_fn write_fn, void *write_fn_data, term_screen_cmd_fn cmd_fn, void *cmd_fn_data) { _cleanup_(term_screen_unrefp) term_screen *screen = NULL; int r; assert_return(out, -EINVAL); screen = new0(term_screen, 1); if (!screen) return -ENOMEM; screen->ref = 1; screen->age = 1; screen->write_fn = write_fn; screen->write_fn_data = write_fn_data; screen->cmd_fn = cmd_fn; screen->cmd_fn_data = cmd_fn_data; screen->flags = TERM_FLAG_7BIT_MODE; screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400; screen->gl = &screen->g0; screen->gr = &screen->g1; screen->g0 = &term_unicode_lower; screen->g1 = &term_unicode_upper; screen->g2 = &term_unicode_lower; screen->g3 = &term_unicode_upper; screen->saved.cursor_x = 0; screen->saved.cursor_y = 0; screen->saved.attr = screen->attr; screen->saved.gl = screen->gl; screen->saved.gr = screen->gr; r = term_page_new(&screen->page_main); if (r < 0) return r; r = term_page_new(&screen->page_alt); if (r < 0) return r; r = term_parser_new(&screen->parser, false); if (r < 0) return r; r = term_history_new(&screen->history_main); if (r < 0) return r; screen->page = screen->page_main; screen->history = screen->history_main; *out = screen; screen = NULL; return 0; } term_screen *term_screen_ref(term_screen *screen) { if (!screen) return NULL; assert_return(screen->ref > 0, NULL); ++screen->ref; return screen; } term_screen *term_screen_unref(term_screen *screen) { if (!screen) return NULL; assert_return(screen->ref > 0, NULL); if (--screen->ref) return NULL; free(screen->answerback); free(screen->tabs); term_history_free(screen->history_main); term_page_free(screen->page_alt); term_page_free(screen->page_main); term_parser_free(screen->parser); free(screen); return NULL; } /* * Write-Helpers * Unfortunately, 7bit/8bit compat mode requires us to send C1 controls encoded * as 7bit if asked by the application. This is really used in the wild, so we * cannot fall back to "always 7bit". * screen_write() is the underlying backend which forwards any writes to the * users's callback. It's the users responsibility to buffer these and write * them out once their call to term_screen_feed_*() returns. * The SEQ_WRITE() and SEQ_WRITE_KEY() macros allow constructing C0/C1 sequences * directly in the code-base without requiring any intermediate buffer during * runtime. */ #define C0_CSI "\e[" #define C1_CSI "\x9b" #define SEQ(_screen, _prefix_esc, _c0, _c1, _seq) \ (((_screen)->flags & TERM_FLAG_7BIT_MODE) ? \ ((_prefix_esc) ? ("\e" _c0 _seq) : (_c0 _seq)) : \ ((_prefix_esc) ? ("\e" _c1 _seq) : (_c1 _seq))) #define SEQ_SIZE(_screen, _prefix_esc, _c0, _c1, _seq) \ (((_screen)->flags & TERM_FLAG_7BIT_MODE) ? \ ((_prefix_esc) ? sizeof("\e" _c0 _seq) : sizeof(_c0 _seq)) : \ ((_prefix_esc) ? sizeof("\e" _c1 _seq) : sizeof(_c1 _seq))) #define SEQ_WRITE_KEY(_screen, _prefix_esc, _c0, _c1, _seq) \ screen_write((_screen), \ SEQ((_screen), (_prefix_esc), \ _c0, _c1, _seq), \ SEQ_SIZE((_screen), (_prefix_esc), \ _c0, _c1, _seq) - 1) #define SEQ_WRITE(_screen, _c0, _c1, _seq) \ SEQ_WRITE_KEY((_screen), false, _c0, _c1, _seq) static int screen_write(term_screen *screen, const void *buf, size_t len) { if (len < 1 || !screen->write_fn) return 0; return screen->write_fn(screen, screen->write_fn_data, buf, len); } /* * Command Forwarding * Some commands cannot be handled by the screen-layer directly. Those are * forwarded to the command-handler of the caller. This is rarely used and can * safely be set to NULL. */ static int screen_forward(term_screen *screen, unsigned int cmd, const term_seq *seq) { if (!screen->cmd_fn) return 0; return screen->cmd_fn(screen, screen->cmd_fn_data, cmd, seq); } /* * Screen Helpers * These helpers implement common-operations like cursor-handler and more, which * are used by several command dispatchers. */ static unsigned int screen_clamp_x(term_screen *screen, unsigned int x) { if (x >= screen->page->width) return (screen->page->width > 0) ? screen->page->width - 1 : 0; return x; } static unsigned int screen_clamp_y(term_screen *screen, unsigned int y) { if (y >= screen->page->height) return (screen->page->height > 0) ? screen->page->height - 1 : 0; return y; } static bool screen_tab_is_set(term_screen *screen, unsigned int pos) { if (pos >= screen->page->width) return false; return screen->tabs[pos / 8] & (1 << (pos % 8)); } static inline void screen_age_cursor(term_screen *screen) { term_cell *cell; cell = term_page_get_cell(screen->page, screen->cursor_x, screen->cursor_y); if (cell) cell->age = screen->age; } static void screen_cursor_clear_wrap(term_screen *screen) { screen->flags &= ~TERM_FLAG_PENDING_WRAP; } static void screen_cursor_set(term_screen *screen, unsigned int x, unsigned int y) { x = screen_clamp_x(screen, x); y = screen_clamp_y(screen, y); if (x == screen->cursor_x && y == screen->cursor_y) return; if (!(screen->flags & TERM_FLAG_HIDE_CURSOR)) screen_age_cursor(screen); screen->cursor_x = x; screen->cursor_y = y; if (!(screen->flags & TERM_FLAG_HIDE_CURSOR)) screen_age_cursor(screen); } static void screen_cursor_set_rel(term_screen *screen, unsigned int x, unsigned int y) { if (screen->flags & TERM_FLAG_ORIGIN_MODE) { x = screen_clamp_x(screen, x); y = screen_clamp_x(screen, y) + screen->page->scroll_idx; if (y >= screen->page->scroll_idx + screen->page->scroll_num) { y = screen->page->scroll_idx + screen->page->scroll_num; if (screen->page->scroll_num > 0) y -= 1; } } screen_cursor_set(screen, x, y); } static void screen_cursor_left(term_screen *screen, unsigned int num) { if (num > screen->cursor_x) num = screen->cursor_x; screen_cursor_set(screen, screen->cursor_x - num, screen->cursor_y); } static void screen_cursor_left_tab(term_screen *screen, unsigned int num) { unsigned int i; i = screen->cursor_x; while (i > 0 && num > 0) { if (screen_tab_is_set(screen, --i)) --num; } screen_cursor_set(screen, i, screen->cursor_y); } static void screen_cursor_right(term_screen *screen, unsigned int num) { if (num > screen->page->width) num = screen->page->width; screen_cursor_set(screen, screen->cursor_x + num, screen->cursor_y); } static void screen_cursor_right_tab(term_screen *screen, unsigned int num) { unsigned int i; i = screen->cursor_x; while (i + 1 < screen->page->width && num > 0) { if (screen_tab_is_set(screen, ++i)) --num; } screen_cursor_set(screen, i, screen->cursor_y); } static void screen_cursor_up(term_screen *screen, unsigned int num, bool scroll) { unsigned int max; if (screen->cursor_y < screen->page->scroll_idx) { if (num > screen->cursor_y) num = screen->cursor_y; screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num); } else { max = screen->cursor_y - screen->page->scroll_idx; if (num > max) { if (num < 1) return; if (!(screen->flags & TERM_FLAG_HIDE_CURSOR)) screen_age_cursor(screen); if (scroll) term_page_scroll_down(screen->page, num - max, &screen->attr, screen->age, NULL); screen->cursor_y = screen->page->scroll_idx; if (!(screen->flags & TERM_FLAG_HIDE_CURSOR)) screen_age_cursor(screen); } else { screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num); } } } static void screen_cursor_down(term_screen *screen, unsigned int num, bool scroll) { unsigned int max; if (screen->cursor_y >= screen->page->scroll_idx + screen->page->scroll_num) { if (num > screen->page->height) num = screen->page->height; screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num); } else { max = screen->page->scroll_idx + screen->page->scroll_num - 1 - screen->cursor_y; if (num > max) { if (num < 1) return; if (!(screen->flags & TERM_FLAG_HIDE_CURSOR)) screen_age_cursor(screen); if (scroll) term_page_scroll_up(screen->page, num - max, &screen->attr, screen->age, screen->history); screen->cursor_y = screen->page->scroll_idx + screen->page->scroll_num - 1; if (!(screen->flags & TERM_FLAG_HIDE_CURSOR)) screen_age_cursor(screen); } else { screen_cursor_set(screen, screen->cursor_x, screen->cursor_y + num); } } } static inline void set_reset(term_screen *screen, unsigned int flag, bool set) { if (set) screen->flags |= flag; else screen->flags &= ~flag; } static void screen_mode_change(term_screen *screen, unsigned int mode, bool dec, bool set) { switch (mode) { case 1: if (dec) { /* * DECCKM: cursor-keys * TODO */ set_reset(screen, TERM_FLAG_CURSOR_KEYS, set); } break; case 6: if (dec) { /* * DECOM: origin-mode * TODO */ set_reset(screen, TERM_FLAG_ORIGIN_MODE, set); } break; case 7: if (dec) { /* * DECAWN: auto-wrap mode * TODO */ set_reset(screen, TERM_FLAG_AUTO_WRAP, set); } break; case 20: if (!dec) { /* * LNM: line-feed/new-line mode * TODO */ set_reset(screen, TERM_FLAG_NEWLINE_MODE, set); } break; case 25: if (dec) { /* * DECTCEM: text-cursor-enable * TODO */ set_reset(screen, TERM_FLAG_HIDE_CURSOR, !set); screen_age_cursor(screen); } break; } } /* map a character according to current GL and GR maps */ static uint32_t screen_map(term_screen *screen, uint32_t val) { uint32_t nval = -1U; /* 32 and 127 always map to identity. 160 and 255 map to identity iff a * 96 character set is loaded into GR. Values above 255 always map to * identity. */ switch (val) { case 33 ... 126: if (screen->glt) { nval = (**screen->glt)[val - 32]; screen->glt = NULL; } else { nval = (**screen->gl)[val - 32]; } break; case 160 ... 255: if (screen->grt) { nval = (**screen->grt)[val - 160]; screen->grt = NULL; } else { nval = (**screen->gr)[val - 160]; } break; } return (nval == -1U) ? val : nval; } /* * Command Handlers * This is the unofficial documentation of all the TERM_CMD_* definitions. Each * handled command has a separate function with an extensive comment on the * semantics of the command. * Note that many semantics are unknown and need to be verified. This is mostly * about error-handling, though. Applications rarely rely on those features. */ static int screen_DA1(term_screen *screen, const term_seq *seq); static int screen_LF(term_screen *screen, const term_seq *seq); static int screen_GRAPHIC(term_screen *screen, const term_seq *seq) { term_char_t ch = TERM_CHAR_NULL; uint32_t c; if (screen->cursor_x + 1 == screen->page->width && screen->flags & TERM_FLAG_PENDING_WRAP && screen->flags & TERM_FLAG_AUTO_WRAP) { screen_cursor_down(screen, 1, true); screen_cursor_set(screen, 0, screen->cursor_y); } screen_cursor_clear_wrap(screen); c = screen_map(screen, seq->terminator); ch = term_char_merge(ch, screen_map(screen, c)); term_page_write(screen->page, screen->cursor_x, screen->cursor_y, ch, 1, &screen->attr, screen->age, false); if (screen->cursor_x + 1 == screen->page->width) screen->flags |= TERM_FLAG_PENDING_WRAP; else screen_cursor_right(screen, 1); return 0; } static int screen_BEL(term_screen *screen, const term_seq *seq) { /* * BEL - sound bell tone * This command should trigger an acoustic bell. Usually, this is * forwarded directly to the pcspkr. However, bells have become quite * uncommon and annoying, so we're not implementing them here. Instead, * it's one of the commands we forward to the caller. */ return screen_forward(screen, TERM_CMD_BEL, seq); } static int screen_BS(term_screen *screen, const term_seq *seq) { /* * BS - backspace * Move cursor one cell to the left. If already at the left margin, * nothing happens. */ screen_cursor_clear_wrap(screen); screen_cursor_left(screen, 1); return 0; } static int screen_CBT(term_screen *screen, const term_seq *seq) { /* * CBT - cursor-backward-tabulation * Move the cursor @args[0] tabs backwards (to the left). The * current cursor cell, in case it's a tab, is not counted. * Furthermore, the cursor cannot be moved beyond position 0 and * it will stop there. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_left_tab(screen, num); return 0; } static int screen_CHA(term_screen *screen, const term_seq *seq) { /* * CHA - cursor-horizontal-absolute * Move the cursor to position @args[0] in the current line. The * cursor cannot be moved beyond the rightmost cell and will stop * there. * * Defaults: * args[0]: 1 */ unsigned int pos = 1; if (seq->args[0] > 0) pos = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_set(screen, pos - 1, screen->cursor_y); return 0; } static int screen_CHT(term_screen *screen, const term_seq *seq) { /* * CHT - cursor-horizontal-forward-tabulation * Move the cursor @args[0] tabs forward (to the right). The * current cursor cell, in case it's a tab, is not counted. * Furthermore, the cursor cannot be moved beyond the rightmost cell * and will stop there. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_right_tab(screen, num); return 0; } static int screen_CNL(term_screen *screen, const term_seq *seq) { /* * CNL - cursor-next-line * Move the cursor @args[0] lines down. * * TODO: Does this stop at the bottom or cause a scroll-up? * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_down(screen, num, false); return 0; } static int screen_CPL(term_screen *screen, const term_seq *seq) { /* * CPL - cursor-preceding-line * Move the cursor @args[0] lines up. * * TODO: Does this stop at the top or cause a scroll-up? * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_up(screen, num, false); return 0; } static int screen_CR(term_screen *screen, const term_seq *seq) { /* * CR - carriage-return * Move the cursor to the left margin on the current line. */ screen_cursor_clear_wrap(screen); screen_cursor_set(screen, 0, screen->cursor_y); return 0; } static int screen_CUB(term_screen *screen, const term_seq *seq) { /* * CUB - cursor-backward * Move the cursor @args[0] positions to the left. The cursor stops * at the left-most position. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_left(screen, num); return 0; } static int screen_CUD(term_screen *screen, const term_seq *seq) { /* * CUD - cursor-down * Move the cursor @args[0] positions down. The cursor stops at the * bottom margin. If it was already moved further, it stops at the * bottom line. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_down(screen, num, false); return 0; } static int screen_CUF(term_screen *screen, const term_seq *seq) { /* * CUF -cursor-forward * Move the cursor @args[0] positions to the right. The cursor stops * at the right-most position. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_right(screen, num); return 0; } static int screen_CUP(term_screen *screen, const term_seq *seq) { /* * CUP - cursor-position * Moves the cursor to position @args[1] x @args[0]. If either is 0, it * is treated as 1. The positions are subject to the origin-mode and * clamped to the addressable with/height. * * Defaults: * args[0]: 1 * args[1]: 1 */ unsigned int x = 1, y = 1; if (seq->args[0] > 0) y = seq->args[0]; if (seq->args[1] > 0) x = seq->args[1]; screen_cursor_clear_wrap(screen); screen_cursor_set_rel(screen, x - 1, y - 1); return 0; } static int screen_CUU(term_screen *screen, const term_seq *seq) { /* * CUU - cursor-up * Move the cursor @args[0] positions up. The cursor stops at the * top margin. If it was already moved further, it stops at the * top line. * * Defaults: * args[0]: 1 * */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_up(screen, num, false); return 0; } static int screen_DA1(term_screen *screen, const term_seq *seq) { /* * DA1 - primary-device-attributes * The primary DA asks for basic terminal features. We simply return * a hard-coded list of features we implement. * Note that the primary DA asks for supported features, not currently * enabled features. * * The terminal's answer is: * ^[ ? 64 ; ARGS c * The first argument, 64, is fixed and denotes a VT420, the last * DEC-term that extended this number. * All following arguments denote supported features. Note * that at most 15 features can be sent (max CSI args). It is safe to * send more, but clients might not be able to parse them. This is a * client's problem and we shouldn't care. There is no other way to * send those feature lists, so we have to extend them beyond 15 in * those cases. * * Known modes: * 1: 132 column mode * The 132 column mode is supported by the terminal. * 2: printer port * A priner-port is supported and can be addressed via * control-codes. * 3: ReGIS graphics * Support for ReGIS graphics is available. The ReGIS routines * provide the "remote graphics instruction set" and allow basic * vector-rendering. * 4: sixel * Support of Sixel graphics is available. This provides access * to the sixel bitmap routines. * 6: selective erase * The terminal supports DECSCA and related selective-erase * functions. This allows to protect specific cells from being * erased, if specified. * 7: soft character set (DRCS) * TODO: ? * 8: user-defined keys (UDKs) * TODO: ? * 9: national-replacement character sets (NRCS) * National-replacement character-sets are available. * 12: Yugoslavian (SCS) * TODO: ? * 15: technical character set * The DEC technical-character-set is available. * 18: windowing capability * TODO: ? * 21: horizontal scrolling * TODO: ? * 22: ANSII color * TODO: ? * 23: Greek * TODO: ? * 24: Turkish * TODO: ? * 29: ANSI text locator * TODO: ? * 42: ISO Latin-2 character set * TODO: ? * 44: PCTerm * TODO: ? * 45: soft keymap * TODO: ? * 46: ASCII emulation * TODO: ? */ return SEQ_WRITE(screen, C0_CSI, C1_CSI, "?64;1;6;9;15c"); } static int screen_DA2(term_screen *screen, const term_seq *seq) { /* * DA2 - secondary-device-attributes * The secondary DA asks for the terminal-ID, firmware versions and * other non-primary attributes. All these values are * informational-only and should not be used by the host to detect * terminal features. * * The terminal's response is: * ^[ > 61 ; FIRMWARE ; KEYBOARD c * whereas 65 is fixed for VT525 terminals, the last terminal-line that * increased this number. FIRMWARE is the firmware * version encoded as major/minor (20 == 2.0) and KEYBOARD is 0 for STD * keyboard and 1 for PC keyboards. * * We replace the firmware-version with the systemd-version so clients * can decode it again. */ return SEQ_WRITE(screen, C0_CSI, C1_CSI, ">65;" PACKAGE_VERSION ";1c"); } static int screen_DA3(term_screen *screen, const term_seq *seq) { /* * DA3 - tertiary-device-attributes * The tertiary DA is used to query the terminal-ID. * * The terminal's response is: * ^P ! | XX AA BB CC ^\ * whereas all four parameters are hexadecimal-encoded pairs. XX * denotes the manufacturing site, AA BB CC is the terminal's ID. */ /* we do not support tertiary DAs */ return 0; } static int screen_DC1(term_screen *screen, const term_seq *seq) { /* * DC1 - device-control-1 or XON * This clears any previous XOFF and resumes terminal-transmission. */ /* we do not support XON */ return 0; } static int screen_DC3(term_screen *screen, const term_seq *seq) { /* * DC3 - device-control-3 or XOFF * Stops terminal transmission. No further characters are sent until * an XON is received. */ /* we do not support XOFF */ return 0; } static int screen_DCH(term_screen *screen, const term_seq *seq) { /* * DCH - delete-character * This deletes @argv[0] characters at the current cursor position. As * characters are deleted, the remaining characters between the cursor * and right margin move to the left. Character attributes move with the * characters. The terminal adds blank spaces with no visual character * attributes at the right margin. DCH has no effect outside the * scrolling margins. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); term_page_delete_cells(screen->page, screen->cursor_x, screen->cursor_y, num, &screen->attr, screen->age); return 0; } static int screen_DECALN(term_screen *screen, const term_seq *seq) { /* * DECALN - screen-alignment-pattern * * Probably not worth implementing. */ return 0; } static int screen_DECANM(term_screen *screen, const term_seq *seq) { /* * DECANM - ansi-mode * Set the terminal into VT52 compatibility mode. Control sequences * overlap with regular sequences so we have to detect them early before * dispatching them. * * Probably not worth implementing. */ return 0; } static int screen_DECBI(term_screen *screen, const term_seq *seq) { /* * DECBI - back-index * This control function moves the cursor backward one column. If the * cursor is at the left margin, then all screen data within the margin * moves one column to the right. The column that shifted past the right * margin is lost. * DECBI adds a new column at the left margin with no visual attributes. * DECBI does not affect the margins. If the cursor is beyond the * left-margin at the left border, then the terminal ignores DECBI. * * Probably not worth implementing. */ return 0; } static int screen_DECCARA(term_screen *screen, const term_seq *seq) { /* * DECCARA - change-attributes-in-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECCRA(term_screen *screen, const term_seq *seq) { /* * DECCRA - copy-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECDC(term_screen *screen, const term_seq *seq) { /* * DECDC - delete-column * * Probably not worth implementing. */ return 0; } static int screen_DECDHL_BH(term_screen *screen, const term_seq *seq) { /* * DECDHL_BH - double-width-double-height-line: bottom half * * Probably not worth implementing. */ return 0; } static int screen_DECDHL_TH(term_screen *screen, const term_seq *seq) { /* * DECDHL_TH - double-width-double-height-line: top half * * Probably not worth implementing. */ return 0; } static int screen_DECDWL(term_screen *screen, const term_seq *seq) { /* * DECDWL - double-width-single-height-line * * Probably not worth implementing. */ return 0; } static int screen_DECEFR(term_screen *screen, const term_seq *seq) { /* * DECEFR - enable-filter-rectangle * Defines the coordinates of a filter rectangle (top, left, bottom, * right as @args[0] to @args[3]) and activates it. * Anytime the locator is detected outside of the filter rectangle, an * outside rectangle event is generated and the rectangle is disabled. * Filter rectangles are always treated as "one-shot" events. Any * parameters that are omitted default to the current locator position. * If all parameters are omitted, any locator motion will be reported. * DECELR always cancels any prevous rectangle definition. * * The locator is usually associated with the mouse-cursor, but based * on cells instead of pixels. See DECELR how to initialize and enable * it. DECELR can also enable pixel-mode instead of cell-mode. * * TODO: implement */ return 0; } static int screen_DECELF(term_screen *screen, const term_seq *seq) { /* * DECELF - enable-local-functions * * Probably not worth implementing. */ return 0; } static int screen_DECELR(term_screen *screen, const term_seq *seq) { /* * DECELR - enable-locator-reporting * This changes the locator-reporting mode. @args[0] specifies the mode * to set, 0 disables locator-reporting, 1 enables it continuously, 2 * enables it for a single report. @args[1] specifies the * precision-mode. 0 and 2 set the reporting to cell-precision, 1 sets * pixel-precision. * * Defaults: * args[0]: 0 * args[1]: 0 * * TODO: implement */ return 0; } static int screen_DECERA(term_screen *screen, const term_seq *seq) { /* * DECERA - erase-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECFI(term_screen *screen, const term_seq *seq) { /* * DECFI - forward-index * This control function moves the cursor forward one column. If the * cursor is at the right margin, then all screen data within the * margins moves one column to the left. The column shifted past the * left margin is lost. * DECFI adds a new column at the right margin, with no visual * attributes. DECFI does not affect margins. If the cursor is beyond * the right margin at the border of the page when the terminal * receives DECFI, then the terminal ignores DECFI. * * Probably not worth implementing. */ return 0; } static int screen_DECFRA(term_screen *screen, const term_seq *seq) { /* * DECFRA - fill-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECIC(term_screen *screen, const term_seq *seq) { /* * DECIC - insert-column * * Probably not worth implementing. */ return 0; } static int screen_DECID(term_screen *screen, const term_seq *seq) { /* * DECID - return-terminal-id * This is an obsolete form of TERM_CMD_DA1. */ return screen_DA1(screen, seq); } static int screen_DECINVM(term_screen *screen, const term_seq *seq) { /* * DECINVM - invoke-macro * * Probably not worth implementing. */ return 0; } static int screen_DECKBD(term_screen *screen, const term_seq *seq) { /* * DECKBD - keyboard-language-selection * * Probably not worth implementing. */ return 0; } static int screen_DECKPAM(term_screen *screen, const term_seq *seq) { /* * DECKPAM - keypad-application-mode * Enables the keypad-application mode. If enabled, the keypad sends * special characters instead of the printed characters. This way, * applications can detect whether a numeric key was pressed on the * top-row or on the keypad. * Default is keypad-numeric-mode. */ screen->flags |= TERM_FLAG_KEYPAD_MODE; return 0; } static int screen_DECKPNM(term_screen *screen, const term_seq *seq) { /* * DECKPNM - keypad-numeric-mode * This disables the keypad-application-mode (DECKPAM) and returns to * the keypad-numeric-mode. Keypresses on the keypad generate the same * sequences as corresponding keypresses on the main keyboard. * Default is keypad-numeric-mode. */ screen->flags &= ~TERM_FLAG_KEYPAD_MODE; return 0; } static int screen_DECLFKC(term_screen *screen, const term_seq *seq) { /* * DECLFKC - local-function-key-control * * Probably not worth implementing. */ return 0; } static int screen_DECLL(term_screen *screen, const term_seq *seq) { /* * DECLL - load-leds * * Probably not worth implementing. */ return 0; } static int screen_DECLTOD(term_screen *screen, const term_seq *seq) { /* * DECLTOD - load-time-of-day * * Probably not worth implementing. */ return 0; } static int screen_DECPCTERM(term_screen *screen, const term_seq *seq) { /* * DECPCTERM - pcterm-mode * This enters/exits the PCTerm mode. Default mode is VT-mode. It can * also select parameters for scancode/keycode mappings in SCO mode. * * Definitely not worth implementing. Lets kill PCTerm/SCO modes! */ return 0; } static int screen_DECPKA(term_screen *screen, const term_seq *seq) { /* * DECPKA - program-key-action * * Probably not worth implementing. */ return 0; } static int screen_DECPKFMR(term_screen *screen, const term_seq *seq) { /* * DECPKFMR - program-key-free-memory-report * * Probably not worth implementing. */ return 0; } static int screen_DECRARA(term_screen *screen, const term_seq *seq) { /* * DECRARA - reverse-attributes-in-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECRC(term_screen *screen, const term_seq *seq) { /* * DECRC - restore-cursor * Restores the terminal to the state saved by the save cursor (DECSC) * function. This includes more than just the cursor-position. * * If nothing was saved by DECSC, then DECRC performs the following * actions: * * Moves the cursor to the home position (upper left of screen). * * Resets origin mode (DECOM). * * Turns all character attributes off (normal setting). * * Maps the ASCII character set into GL, and the DEC Supplemental * Graphic set into GR. * * The terminal maintains a separate DECSC buffer for the main display * and the status line. This feature lets you save a separate operating * state for the main display and the status line. */ screen->attr = screen->saved.attr; screen->gl = screen->saved.gl; screen->gr = screen->saved.gr; screen->glt = screen->saved.glt; screen->grt = screen->saved.grt; set_reset(screen, TERM_FLAG_AUTO_WRAP, screen->flags & TERM_FLAG_AUTO_WRAP); set_reset(screen, TERM_FLAG_ORIGIN_MODE, screen->flags & TERM_FLAG_ORIGIN_MODE); screen_cursor_set(screen, screen->saved.cursor_x, screen->saved.cursor_y); return 0; } static int screen_DECREQTPARM(term_screen *screen, const term_seq *seq) { /* * DECREQTPARM - request-terminal-parameters * The sequence DECREPTPARM is sent by the terminal controller to notify * the host of the status of selected terminal parameters. The status * sequence may be sent when requested by the host or at the terminal's * discretion. DECREPTPARM is sent upon receipt of a DECREQTPARM. * * If @args[0] is 0, this marks a request and the terminal is allowed * to send DECREPTPARM messages without request. If it is 1, the same * applies but the terminal should no longer send DECREPTPARM * unrequested. * 2 and 3 mark a report, but 3 is only used if the terminal answers as * an explicit request with @args[0] == 1. * * The other arguments are ignored in requests, but have the following * meaning in responses: * args[1]: 1=no-parity-set 4=parity-set-and-odd 5=parity-set-and-even * args[2]: 1=8bits-per-char 2=7bits-per-char * args[3]: transmission-speed * args[4]: receive-speed * args[5]: 1=bit-rate-multiplier-is-16 * args[6]: This value communicates the four switch values in block 5 * of SETUP B, which are only visible to the user when an STP * option is installed. These bits may be assigned for an STP * device. The four bits are a decimal-encoded binary number. * Value between 0-15. * * The transmission/receive speeds have mappings for number => bits/s * which are quite weird. Examples are: 96->3600, 112->9600, 120->19200 * * Defaults: * args[0]: 0 */ if (seq->n_args < 1 || seq->args[0] == 0) { screen->flags &= ~TERM_FLAG_INHIBIT_TPARM; return SEQ_WRITE(screen, C0_CSI, C1_CSI, "2;1;1;120;120;1;0x"); } else if (seq->args[0] == 1) { screen->flags |= TERM_FLAG_INHIBIT_TPARM; return SEQ_WRITE(screen, C0_CSI, C1_CSI, "3;1;1;120;120;1;0x"); } else { return 0; } } static int screen_DECRPKT(term_screen *screen, const term_seq *seq) { /* * DECRPKT - report-key-type * Response to DECRQKT, we can safely ignore it as we're the one sending * it to the host. */ return 0; } static int screen_DECRQCRA(term_screen *screen, const term_seq *seq) { /* * DECRQCRA - request-checksum-of-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECRQDE(term_screen *screen, const term_seq *seq) { /* * DECRQDE - request-display-extent * * Probably not worth implementing. */ return 0; } static int screen_DECRQKT(term_screen *screen, const term_seq *seq) { /* * DECRQKT - request-key-type * * Probably not worth implementing. */ return 0; } static int screen_DECRQLP(term_screen *screen, const term_seq *seq) { /* * DECRQLP - request-locator-position * See DECELR for locator-information. * * TODO: document and implement */ return 0; } static int screen_DECRQM_ANSI(term_screen *screen, const term_seq *seq) { /* * DECRQM_ANSI - request-mode-ansi * The host sends this control function to find out if a particular mode * is set or reset. The terminal responds with a report mode function. * @args[0] contains the mode to query. * * Response is DECRPM with the first argument set to the mode that was * queried, second argument is 0 if mode is invalid, 1 if mode is set, * 2 if mode is not set (reset), 3 if mode is permanently set and 4 if * mode is permanently not set (reset): * ANSI: ^[ MODE ; VALUE $ y * DEC: ^[ ? MODE ; VALUE $ y * * TODO: implement */ return 0; } static int screen_DECRQM_DEC(term_screen *screen, const term_seq *seq) { /* * DECRQM_DEC - request-mode-dec * Same as DECRQM_ANSI but for DEC modes. * * TODO: implement */ return 0; } static int screen_DECRQPKFM(term_screen *screen, const term_seq *seq) { /* * DECRQPKFM - request-program-key-free-memory * * Probably not worth implementing. */ return 0; } static int screen_DECRQPSR(term_screen *screen, const term_seq *seq) { /* * DECRQPSR - request-presentation-state-report * * Probably not worth implementing. */ return 0; } static int screen_DECRQTSR(term_screen *screen, const term_seq *seq) { /* * DECRQTSR - request-terminal-state-report * * Probably not worth implementing. */ return 0; } static int screen_DECRQUPSS(term_screen *screen, const term_seq *seq) { /* * DECRQUPSS - request-user-preferred-supplemental-set * * Probably not worth implementing. */ return 0; } static int screen_DECSACE(term_screen *screen, const term_seq *seq) { /* * DECSACE - select-attribute-change-extent * * Probably not worth implementing. */ return 0; } static int screen_DECSASD(term_screen *screen, const term_seq *seq) { /* * DECSASD - select-active-status-display * * Probably not worth implementing. */ return 0; } static int screen_DECSC(term_screen *screen, const term_seq *seq) { /* * DECSC - save-cursor * Save cursor and terminal state so it can be restored later on. * Saves the following items in the terminal's memory: * * Cursor position * * Character attributes set by the SGR command * * Character sets (G0, G1, G2, or G3) currently in GL and GR * * Wrap flag (autowrap or no autowrap) * * State of origin mode (DECOM) * * Selective erase attribute * * Any single shift 2 (SS2) or single shift 3 (SS3) functions sent */ screen->saved.cursor_x = screen->cursor_x; screen->saved.cursor_y = screen->cursor_y; screen->saved.attr = screen->attr; screen->saved.gl = screen->gl; screen->saved.gr = screen->gr; screen->saved.glt = screen->glt; screen->saved.grt = screen->grt; screen->saved.flags = screen->flags & (TERM_FLAG_AUTO_WRAP | TERM_FLAG_ORIGIN_MODE); return 0; } static int screen_DECSCA(term_screen *screen, const term_seq *seq) { /* * DECSCA - select-character-protection-attribute * Defines the characters that come after it as erasable or not erasable * from the screen. The selective erase control functions (DECSED and * DECSEL) can only erase characters defined as erasable. * * @args[0] specifies the new mode. 0 and 2 mark any following character * as erasable, 1 marks it as not erasable. * * Defaults: * args[0]: 0 */ unsigned int mode = 0; if (seq->args[0] > 0) mode = seq->args[0]; switch (mode) { case 0: case 2: screen->attr.protect = 0; break; case 1: screen->attr.protect = 1; break; } return 0; } static int screen_DECSCL(term_screen *screen, const term_seq *seq) { /* * DECSCL - select-conformance-level * Select the terminal's operating level. The factory default is * level 4 (VT Level 4 mode, 7-bit controls). * When you change the conformance level, the terminal performs a hard * reset (RIS). * * @args[0] defines the conformance-level, valid values are: * 61: Level 1 (VT100) * 62: Level 2 (VT200) * 63: Level 3 (VT300) * 64: Level 4 (VT400) * @args[1] defines the 8bit-mode, valid values are: * 0: 8-bit controls * 1: 7-bit controls * 2: 8-bit controls (same as 0) * * If @args[0] is 61, then @args[1] is ignored and 7bit controls are * enforced. * * Defaults: * args[0]: 64 * args[1]: 0 */ unsigned int level = 64, bit = 0; if (seq->n_args > 0) { level = seq->args[0]; if (seq->n_args > 1) bit = seq->args[1]; } term_screen_hard_reset(screen); switch (level) { case 61: screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT100; screen->flags |= TERM_FLAG_7BIT_MODE; break; case 62 ... 69: screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400; if (bit == 1) screen->flags |= TERM_FLAG_7BIT_MODE; else screen->flags &= ~TERM_FLAG_7BIT_MODE; break; } return 0; } static int screen_DECSCP(term_screen *screen, const term_seq *seq) { /* * DECSCP - select-communication-port * * Probably not worth implementing. */ return 0; } static int screen_DECSCPP(term_screen *screen, const term_seq *seq) { /* * DECSCPP - select-columns-per-page * Select columns per page. The number of rows is unaffected by this. * @args[0] selectes the number of columns (width), DEC only defines 80 * and 132, but we allow any integer here. 0 is equivalent to 80. * Page content is *not* cleared and the cursor is left untouched. * However, if the page is reduced in width and the cursor would be * outside the visible region, it's set to the right border. Newly added * cells are cleared. No data is retained outside the visible region. * * Defaults: * args[0]: 0 * * TODO: implement */ return 0; } static int screen_DECSCS(term_screen *screen, const term_seq *seq) { /* * DECSCS - select-communication-speed * * Probably not worth implementing. */ return 0; } static int screen_DECSCUSR(term_screen *screen, const term_seq *seq) { /* * DECSCUSR - set-cursor-style * This changes the style of the cursor. @args[0] can be one of: * 0, 1: blinking block * 2: steady block * 3: blinking underline * 4: steady underline * Changing this setting does _not_ affect the cursor visibility itself. * Use DECTCEM for that. * * Defaults: * args[0]: 0 * * TODO: implement */ return 0; } static int screen_DECSDDT(term_screen *screen, const term_seq *seq) { /* * DECSDDT - select-disconnect-delay-time * * Probably not worth implementing. */ return 0; } static int screen_DECSDPT(term_screen *screen, const term_seq *seq) { /* * DECSDPT - select-digital-printed-data-type * * Probably not worth implementing. */ return 0; } static int screen_DECSED(term_screen *screen, const term_seq *seq) { /* * DECSED - selective-erase-in-display * This control function erases some or all of the erasable characters * in the display. DECSED can only erase characters defined as erasable * by the DECSCA control function. DECSED works inside or outside the * scrolling margins. * * @args[0] defines which regions are erased. If it is 0, all cells from * the cursor (inclusive) till the end of the display are erase. If it * is 1, all cells from the start of the display till the cursor * (inclusive) are erased. If it is 2, all cells are erased. * * Defaults: * args[0]: 0 */ unsigned int mode = 0; if (seq->args[0] > 0) mode = seq->args[0]; switch (mode) { case 0: term_page_erase(screen->page, screen->cursor_x, screen->cursor_y, screen->page->width, screen->page->height, &screen->attr, screen->age, true); break; case 1: term_page_erase(screen->page, 0, 0, screen->cursor_x, screen->cursor_y, &screen->attr, screen->age, true); break; case 2: term_page_erase(screen->page, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, true); break; } return 0; } static int screen_DECSEL(term_screen *screen, const term_seq *seq) { /* * DECSEL - selective-erase-in-line * This control function erases some or all of the erasable characters * in a single line of text. DECSEL erases only those characters defined * as erasable by the DECSCA control function. DECSEL works inside or * outside the scrolling margins. * * @args[0] defines the region to be erased. If it is 0, all cells from * the cursor (inclusive) till the end of the line are erase. If it is * 1, all cells from the start of the line till the cursor (inclusive) * are erased. If it is 2, the whole line of the cursor is erased. * * Defaults: * args[0]: 0 */ unsigned int mode = 0; if (seq->args[0] > 0) mode = seq->args[0]; switch (mode) { case 0: term_page_erase(screen->page, screen->cursor_x, screen->cursor_y, screen->page->width, screen->cursor_y, &screen->attr, screen->age, true); break; case 1: term_page_erase(screen->page, 0, screen->cursor_y, screen->cursor_x, screen->cursor_y, &screen->attr, screen->age, true); break; case 2: term_page_erase(screen->page, 0, screen->cursor_y, screen->page->width, screen->cursor_y, &screen->attr, screen->age, true); break; } return 0; } static int screen_DECSERA(term_screen *screen, const term_seq *seq) { /* * DECSERA - selective-erase-rectangular-area * * Probably not worth implementing. */ return 0; } static int screen_DECSFC(term_screen *screen, const term_seq *seq) { /* * DECSFC - select-flow-control * * Probably not worth implementing. */ return 0; } static int screen_DECSKCV(term_screen *screen, const term_seq *seq) { /* * DECSKCV - set-key-click-volume * * Probably not worth implementing. */ return 0; } static int screen_DECSLCK(term_screen *screen, const term_seq *seq) { /* * DECSLCK - set-lock-key-style * * Probably not worth implementing. */ return 0; } static int screen_DECSLE(term_screen *screen, const term_seq *seq) { /* * DECSLE - select-locator-events * * TODO: implement */ return 0; } static int screen_DECSLPP(term_screen *screen, const term_seq *seq) { /* * DECSLPP - set-lines-per-page * Set the number of lines used for the page. @args[0] specifies the * number of lines to be used. DEC only allows a limited number of * choices, however, we allow all integers. 0 is equivalent to 24. * * Defaults: * args[0]: 0 * * TODO: implement */ return 0; } static int screen_DECSLRM_OR_SC(term_screen *screen, const term_seq *seq) { /* * DECSLRM_OR_SC - set-left-and-right-margins or save-cursor * * TODO: Detect save-cursor and run it. DECSLRM is not worth * implementing. */ return 0; } static int screen_DECSMBV(term_screen *screen, const term_seq *seq) { /* * DECSMBV - set-margin-bell-volume * * Probably not worth implementing. */ return 0; } static int screen_DECSMKR(term_screen *screen, const term_seq *seq) { /* * DECSMKR - select-modifier-key-reporting * * Probably not worth implementing. */ return 0; } static int screen_DECSNLS(term_screen *screen, const term_seq *seq) { /* * DECSNLS - set-lines-per-screen * * Probably not worth implementing. */ return 0; } static int screen_DECSPP(term_screen *screen, const term_seq *seq) { /* * DECSPP - set-port-parameter * * Probably not worth implementing. */ return 0; } static int screen_DECSPPCS(term_screen *screen, const term_seq *seq) { /* * DECSPPCS - select-pro-printer-character-set * * Probably not worth implementing. */ return 0; } static int screen_DECSPRTT(term_screen *screen, const term_seq *seq) { /* * DECSPRTT - select-printer-type * * Probably not worth implementing. */ return 0; } static int screen_DECSR(term_screen *screen, const term_seq *seq) { /* * DECSR - secure-reset * * Probably not worth implementing. */ return 0; } static int screen_DECSRFR(term_screen *screen, const term_seq *seq) { /* * DECSRFR - select-refresh-rate * * Probably not worth implementing. */ return 0; } static int screen_DECSSCLS(term_screen *screen, const term_seq *seq) { /* * DECSSCLS - set-scroll-speed * * Probably not worth implementing. */ return 0; } static int screen_DECSSDT(term_screen *screen, const term_seq *seq) { /* * DECSSDT - select-status-display-line-type * * Probably not worth implementing. */ return 0; } static int screen_DECSSL(term_screen *screen, const term_seq *seq) { /* * DECSSL - select-setup-language * * Probably not worth implementing. */ return 0; } static int screen_DECST8C(term_screen *screen, const term_seq *seq) { /* * DECST8C - set-tab-at-every-8-columns * Clear the tab-ruler and reset it to a tab at every 8th column, * starting at 9 (though, setting a tab at 1 is fine as it has no * effect). */ unsigned int i; for (i = 0; i < screen->page->width; i += 8) screen->tabs[i / 8] = 0x1; return 0; } static int screen_DECSTBM(term_screen *screen, const term_seq *seq) { /* * DECSTBM - set-top-and-bottom-margins * This control function sets the top and bottom margins for the current * page. You cannot perform scrolling outside the margins. * * @args[0] defines the top margin, @args[1] defines the bottom margin. * The bottom margin must be lower than the top-margin. * * This call resets the cursor position to 0/0 of the page. * * Defaults: * args[0]: 1 * args[1]: last page-line */ unsigned int top, bottom; top = 1; bottom = screen->page->height; if (seq->args[0] > 0) top = seq->args[0]; if (seq->args[1] > 0) bottom = seq->args[1]; if (top > screen->page->height) top = screen->page->height; if (bottom > screen->page->height) bottom = screen->page->height; if (top >= bottom || top > screen->page->height || bottom > screen->page->height) { top = 1; bottom = screen->page->height; } term_page_set_scroll_region(screen->page_main, top - 1, bottom - top + 1); term_page_set_scroll_region(screen->page_alt, top - 1, bottom - top + 1); screen_cursor_clear_wrap(screen); screen_cursor_set(screen, 0, 0); return 0; } static int screen_DECSTR(term_screen *screen, const term_seq *seq) { /* * DECSTR - soft-terminal-reset * Perform a soft reset to the default values. */ term_screen_soft_reset(screen); return 0; } static int screen_DECSTRL(term_screen *screen, const term_seq *seq) { /* * DECSTRL - set-transmit-rate-limit * * Probably not worth implementing. */ return 0; } static int screen_DECSWBV(term_screen *screen, const term_seq *seq) { /* * DECSWBV - set-warning-bell-volume * * Probably not worth implementing. */ return 0; } static int screen_DECSWL(term_screen *screen, const term_seq *seq) { /* * DECSWL - single-width-single-height-line * * Probably not worth implementing. */ return 0; } static int screen_DECTID(term_screen *screen, const term_seq *seq) { /* * DECTID - select-terminal-id * * Probably not worth implementing. */ return 0; } static int screen_DECTME(term_screen *screen, const term_seq *seq) { /* * DECTME - terminal-mode-emulation * * Probably not worth implementing. */ return 0; } static int screen_DECTST(term_screen *screen, const term_seq *seq) { /* * DECTST - invoke-confidence-test * * Probably not worth implementing. */ return 0; } static int screen_DL(term_screen *screen, const term_seq *seq) { /* * DL - delete-line * This control function deletes one or more lines in the scrolling * region, starting with the line that has the cursor. @args[0] defines * the number of lines to delete. 0 is treated the same as 1. * As lines are deleted, lines below the cursor and in the scrolling * region move up. The terminal adds blank lines with no visual * character attributes at the bottom of the scrolling region. If it is * greater than the number of lines remaining on the page, DL deletes * only the remaining lines. DL has no effect outside the scrolling * margins. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; term_page_delete_lines(screen->page, screen->cursor_y, num, &screen->attr, screen->age); return 0; } static int screen_DSR_ANSI(term_screen *screen, const term_seq *seq) { /* * DSR_ANSI - device-status-report-ansi * * TODO: implement */ return 0; } static int screen_DSR_DEC(term_screen *screen, const term_seq *seq) { /* * DSR_DEC - device-status-report-dec * * TODO: implement */ return 0; } static int screen_ECH(term_screen *screen, const term_seq *seq) { /* * ECH - erase-character * This control function erases one or more characters, from the cursor * position to the right. ECH clears character attributes from erased * character positions. ECH works inside or outside the scrolling * margins. * @args[0] defines the number of characters to erase. 0 is treated the * same as 1. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; term_page_erase(screen->page, screen->cursor_x, screen->cursor_y, screen->cursor_x + num, screen->cursor_y, &screen->attr, screen->age, false); return 0; } static int screen_ED(term_screen *screen, const term_seq *seq) { /* * ED - erase-in-display * This control function erases characters from part or all of the * display. When you erase complete lines, they become single-height, * single-width lines, with all visual character attributes cleared. ED * works inside or outside the scrolling margins. * * @args[0] defines the region to erase. 0 means from cursor (inclusive) * till the end of the screen. 1 means from the start of the screen till * the cursor (inclusive) and 2 means the whole screen. * * Defaults: * args[0]: 0 */ unsigned int mode = 0; if (seq->args[0] > 0) mode = seq->args[0]; switch (mode) { case 0: term_page_erase(screen->page, screen->cursor_x, screen->cursor_y, screen->page->width, screen->page->height, &screen->attr, screen->age, false); break; case 1: term_page_erase(screen->page, 0, 0, screen->cursor_x, screen->cursor_y, &screen->attr, screen->age, false); break; case 2: term_page_erase(screen->page, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false); break; } return 0; } static int screen_EL(term_screen *screen, const term_seq *seq) { /* * EL - erase-in-line * This control function erases characters on the line that has the * cursor. EL clears all character attributes from erased character * positions. EL works inside or outside the scrolling margins. * * @args[0] defines the region to erase. 0 means from cursor (inclusive) * till the end of the line. 1 means from the start of the line till the * cursor (inclusive) and 2 means the whole line. * * Defaults: * args[0]: 0 */ unsigned int mode = 0; if (seq->args[0] > 0) mode = seq->args[0]; switch (mode) { case 0: term_page_erase(screen->page, screen->cursor_x, screen->cursor_y, screen->page->width, screen->cursor_y, &screen->attr, screen->age, false); break; case 1: term_page_erase(screen->page, 0, screen->cursor_y, screen->cursor_x, screen->cursor_y, &screen->attr, screen->age, false); break; case 2: term_page_erase(screen->page, 0, screen->cursor_y, screen->page->width, screen->cursor_y, &screen->attr, screen->age, false); break; } return 0; } static int screen_ENQ(term_screen *screen, const term_seq *seq) { /* * ENQ - enquiry * Transmit the answerback-string. If none is set, do nothing. */ if (screen->answerback) return screen_write(screen, screen->answerback, strlen(screen->answerback)); return 0; } static int screen_EPA(term_screen *screen, const term_seq *seq) { /* * EPA - end-of-guarded-area * * TODO: What is this? */ return 0; } static int screen_FF(term_screen *screen, const term_seq *seq) { /* * FF - form-feed * This causes the cursor to jump to the next line. It is treated the * same as LF. */ return screen_LF(screen, seq); } static int screen_HPA(term_screen *screen, const term_seq *seq) { /* * HPA - horizontal-position-absolute * HPA causes the active position to be moved to the n-th horizontal * position of the active line. If an attempt is made to move the active * position past the last position on the line, then the active position * stops at the last position on the line. * * @args[0] defines the horizontal position. 0 is treated as 1. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_set(screen, num - 1, screen->cursor_y); return 0; } static int screen_HPR(term_screen *screen, const term_seq *seq) { /* * HPR - horizontal-position-relative * HPR causes the active position to be moved to the n-th following * horizontal position of the active line. If an attempt is made to move * the active position past the last position on the line, then the * active position stops at the last position on the line. * * @args[0] defines the horizontal position. 0 is treated as 1. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_right(screen, num); return 0; } static int screen_HT(term_screen *screen, const term_seq *seq) { /* * HT - horizontal-tab * Moves the cursor to the next tab stop. If there are no more tab * stops, the cursor moves to the right margin. HT does not cause text * to auto wrap. */ screen_cursor_clear_wrap(screen); screen_cursor_right_tab(screen, 1); return 0; } static int screen_HTS(term_screen *screen, const term_seq *seq) { /* * HTS - horizontal-tab-set * HTS sets a horizontal tab stop at the column position indicated by * the value of the active column when the terminal receives an HTS. * * Executing an HTS does not effect the other horizontal tab stop * settings. */ unsigned int pos; pos = screen->cursor_x; if (screen->page->width > 0) screen->tabs[pos / 8] |= 1U << (pos % 8); return 0; } static int screen_HVP(term_screen *screen, const term_seq *seq) { /* * HVP - horizontal-and-vertical-position * This control function works the same as the cursor position (CUP) * function. Origin mode (DECOM) selects line numbering and the ability * to move the cursor into margins. * * Defaults: * args[0]: 1 * args[1]: 1 */ return screen_CUP(screen, seq); } static int screen_ICH(term_screen *screen, const term_seq *seq) { /* * ICH - insert-character * This control function inserts one or more space (SP) characters * starting at the cursor position. @args[0] is the number of characters * to insert. 0 is treated as 1. * * The ICH sequence inserts blank characters with the normal * character attribute. The cursor remains at the beginning of the blank * characters. Text between the cursor and right margin moves to the * right. Characters scrolled past the right margin are lost. ICH has no * effect outside the scrolling margins. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); term_page_insert_cells(screen->page, screen->cursor_x, screen->cursor_y, num, &screen->attr, screen->age); return 0; } static int screen_IL(term_screen *screen, const term_seq *seq) { /* * IL - insert-line * This control function inserts one or more blank lines, starting at * the cursor. @args[0] is the number of lines to insert. 0 is treated * as 1. * * As lines are inserted, lines below the cursor and in the scrolling * region move down. Lines scrolled off the page are lost. IL has no * effect outside the page margins. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); term_page_insert_lines(screen->page, screen->cursor_y, num, &screen->attr, screen->age); return 0; } static int screen_IND(term_screen *screen, const term_seq *seq) { /* * IND - index * IND moves the cursor down one line in the same column. If the cursor * is at the bottom margin, then the screen performs a scroll-up. */ screen_cursor_down(screen, 1, true); return 0; } static int screen_LF(term_screen *screen, const term_seq *seq) { /* * LF - line-feed * Causes a line feed or a new line operation, depending on the setting * of line feed/new line mode. */ screen_cursor_down(screen, 1, true); if (screen->flags & TERM_FLAG_NEWLINE_MODE) screen_cursor_left(screen, screen->cursor_x); return 0; } static int screen_LS1R(term_screen *screen, const term_seq *seq) { /* * LS1R - locking-shift-1-right * Map G1 into GR. */ screen->gr = &screen->g1; return 0; } static int screen_LS2(term_screen *screen, const term_seq *seq) { /* * LS2 - locking-shift-2 * Map G2 into GL. */ screen->gl = &screen->g2; return 0; } static int screen_LS2R(term_screen *screen, const term_seq *seq) { /* * LS2R - locking-shift-2-right * Map G2 into GR. */ screen->gr = &screen->g2; return 0; } static int screen_LS3(term_screen *screen, const term_seq *seq) { /* * LS3 - locking-shift-3 * Map G3 into GL. */ screen->gl = &screen->g3; return 0; } static int screen_LS3R(term_screen *screen, const term_seq *seq) { /* * LS3R - locking-shift-3-right * Map G3 into GR. */ screen->gr = &screen->g3; return 0; } static int screen_MC_ANSI(term_screen *screen, const term_seq *seq) { /* * MC_ANSI - media-copy-ansi * * Probably not worth implementing. */ return 0; } static int screen_MC_DEC(term_screen *screen, const term_seq *seq) { /* * MC_DEC - media-copy-dec * * Probably not worth implementing. */ return 0; } static int screen_NEL(term_screen *screen, const term_seq *seq) { /* * NEL - next-line * Moves cursor to first position on next line. If cursor is at bottom * margin, then screen performs a scroll-up. */ screen_cursor_clear_wrap(screen); screen_cursor_down(screen, 1, true); screen_cursor_set(screen, 0, screen->cursor_y); return 0; } static int screen_NP(term_screen *screen, const term_seq *seq) { /* * NP - next-page * This control function moves the cursor forward to the home position * on one of the following pages in page memory. If there is only one * page, then the terminal ignores NP. * If NP tries to move the cursor past the last page in memory, then the * cursor stops at the last page. * * @args[0] defines the number of pages to forward. 0 is treated as 1. * * Defaults: * args[0]: 1 * * Probably not worth implementing. We only support a single page. */ return 0; } static int screen_NULL(term_screen *screen, const term_seq *seq) { /* * NULL - null * The NULL operation does nothing. ASCII NULL is always ignored. */ return 0; } static int screen_PP(term_screen *screen, const term_seq *seq) { /* * PP - preceding-page * This control function moves the cursor backward to the home position * on one of the preceding pages in page memory. If there is only one * page, then the terminal ignores PP. * If PP tries to move the cursor back farther than the first page in * memory, then the cursor stops at the first page. * * @args[0] defines the number of pages to go backwards. 0 is treated * as 1. * * Defaults: * args[0]: 1 * * Probably not worth implementing. We only support a single page. */ return 0; } static int screen_PPA(term_screen *screen, const term_seq *seq) { /* * PPA - page-position-absolute * This control function can move the cursor to the corresponding row * and column on any page in page memory. You select the page by its * number. If there is only one page, then the terminal ignores PPA. * * @args[0] is the number of the page to move the cursor to. If it is * greater than the number of the last page in memory, then the cursor * stops at the last page. If it is less than the number of the first * page, then the cursor stops at the first page. * * Defaults: * args[0]: 1 * * Probably not worth implementing. We only support a single page. */ return 0; } static int screen_PPB(term_screen *screen, const term_seq *seq) { /* * PPB - page-position-backward * This control function moves the cursor backward to the corresponding * row and column on one of the preceding pages in page memory. If there * is only one page, then the terminal ignores PPB. * * @args[0] indicates the number of pages to move the cursor backward. * If it tries to move the cursor back farther than the first page in * memory, then the cursor stops at the first page. 0 is treated as 1. * * Defaults: * args[0]: 1 * * Probably not worth implementing. We only support a single page. */ return 0; } static int screen_PPR(term_screen *screen, const term_seq *seq) { /* * PPR - page-position-relative * This control function moves the cursor forward to the corresponding * row and column on one of the following pages in page memory. If there * is only one page, then the terminal ignores PPR. * * @args[0] indicates how many pages to move the cursor forward. If it * tries to move the cursor beyond the last page in memory, then the * cursor stops at the last page. 0 is treated as 1. * * Defaults: * args[0]: 1 * * Probably not worth implementing. We only support a single page. */ return 0; } static int screen_RC(term_screen *screen, const term_seq *seq) { /* * RC - restore-cursor */ return screen_DECRC(screen, seq); } static int screen_REP(term_screen *screen, const term_seq *seq) { /* * REP - repeat * Repeat the preceding graphics-character the given number of times. * @args[0] specifies how often it shall be repeated. 0 is treated as 1. * * Defaults: * args[0]: 1 * * Probably not worth implementing. */ return 0; } static int screen_RI(term_screen *screen, const term_seq *seq) { /* * RI - reverse-index * Moves the cursor up one line in the same column. If the cursor is at * the top margin, the page scrolls down. */ screen_cursor_up(screen, 1, true); return 0; } static int screen_RIS(term_screen *screen, const term_seq *seq) { /* * RIS - reset-to-initial-state * This control function causes a nonvolatile memory (NVR) recall to * occur. RIS replaces all set-up features with their saved settings. * * The terminal stores these saved settings in NVR memory. The saved * setting for a feature is the same as the factory-default setting, * unless you saved a new setting. */ term_screen_hard_reset(screen); return 0; } static int screen_RM_ANSI(term_screen *screen, const term_seq *seq) { /* * RM_ANSI - reset-mode-ansi * * TODO: implement (see VT510rm manual) */ unsigned int i; for (i = 0; i < seq->n_args; ++i) screen_mode_change(screen, seq->args[i], false, false); return 0; } static int screen_RM_DEC(term_screen *screen, const term_seq *seq) { /* * RM_DEC - reset-mode-dec * This is the same as RM_ANSI but for DEC modes. */ unsigned int i; for (i = 0; i < seq->n_args; ++i) screen_mode_change(screen, seq->args[i], true, false); return 0; } static int screen_S7C1T(term_screen *screen, const term_seq *seq) { /* * S7C1T - set-7bit-c1-terminal * This causes the terminal to start sending C1 controls as 7bit * sequences instead of 8bit C1 controls. * This is ignored if the terminal is below level-2 emulation mode * (VT100 and below), the terminal already sends 7bit controls then. */ if (screen->conformance_level > TERM_CONFORMANCE_LEVEL_VT100) screen->flags |= TERM_FLAG_7BIT_MODE; return 0; } static int screen_S8C1T(term_screen *screen, const term_seq *seq) { /* * S8C1T - set-8bit-c1-terminal * This causes the terminal to start sending C1 controls as 8bit C1 * control instead of 7bit sequences. * This is ignored if the terminal is below level-2 emulation mode * (VT100 and below). The terminal always sends 7bit controls in those * modes. */ if (screen->conformance_level > TERM_CONFORMANCE_LEVEL_VT100) screen->flags &= ~TERM_FLAG_7BIT_MODE; return 0; } static int screen_SCS(term_screen *screen, const term_seq *seq) { /* * SCS - select-character-set * Designate character sets to G-sets. The mapping from intermediates * and terminal characters in the escape sequence to G-sets and * character-sets is non-trivial and implemented separately. See there * for more information. * This call simply sets the selected G-set to the desired * character-set. */ term_charset *cs = NULL; /* TODO: support more of them? */ switch (seq->charset) { case TERM_CHARSET_ISO_LATIN1_SUPPLEMENTAL: case TERM_CHARSET_ISO_LATIN2_SUPPLEMENTAL: case TERM_CHARSET_ISO_LATIN5_SUPPLEMENTAL: case TERM_CHARSET_ISO_GREEK_SUPPLEMENTAL: case TERM_CHARSET_ISO_HEBREW_SUPPLEMENTAL: case TERM_CHARSET_ISO_LATIN_CYRILLIC: break; case TERM_CHARSET_DEC_SPECIAL_GRAPHIC: cs = &term_dec_special_graphics; break; case TERM_CHARSET_DEC_SUPPLEMENTAL: cs = &term_dec_supplemental_graphics; break; case TERM_CHARSET_DEC_TECHNICAL: case TERM_CHARSET_CYRILLIC_DEC: case TERM_CHARSET_DUTCH_NRCS: case TERM_CHARSET_FINNISH_NRCS: case TERM_CHARSET_FRENCH_NRCS: case TERM_CHARSET_FRENCH_CANADIAN_NRCS: case TERM_CHARSET_GERMAN_NRCS: case TERM_CHARSET_GREEK_DEC: case TERM_CHARSET_GREEK_NRCS: case TERM_CHARSET_HEBREW_DEC: case TERM_CHARSET_HEBREW_NRCS: case TERM_CHARSET_ITALIAN_NRCS: case TERM_CHARSET_NORWEGIAN_DANISH_NRCS: case TERM_CHARSET_PORTUGUESE_NRCS: case TERM_CHARSET_RUSSIAN_NRCS: case TERM_CHARSET_SCS_NRCS: case TERM_CHARSET_SPANISH_NRCS: case TERM_CHARSET_SWEDISH_NRCS: case TERM_CHARSET_SWISS_NRCS: case TERM_CHARSET_TURKISH_DEC: case TERM_CHARSET_TURKISH_NRCS: break; case TERM_CHARSET_USERPREF_SUPPLEMENTAL: break; } if (seq->intermediates & TERM_SEQ_FLAG_POPEN) screen->g0 = cs ? : &term_unicode_lower; else if (seq->intermediates & TERM_SEQ_FLAG_PCLOSE) screen->g1 = cs ? : &term_unicode_upper; else if (seq->intermediates & TERM_SEQ_FLAG_MULT) screen->g2 = cs ? : &term_unicode_lower; else if (seq->intermediates & TERM_SEQ_FLAG_PLUS) screen->g3 = cs ? : &term_unicode_upper; else if (seq->intermediates & TERM_SEQ_FLAG_MINUS) screen->g1 = cs ? : &term_unicode_upper; else if (seq->intermediates & TERM_SEQ_FLAG_DOT) screen->g2 = cs ? : &term_unicode_lower; else if (seq->intermediates & TERM_SEQ_FLAG_SLASH) screen->g3 = cs ? : &term_unicode_upper; return 0; } static int screen_SD(term_screen *screen, const term_seq *seq) { /* * SD - scroll-down * This control function moves the user window down a specified number * of lines in page memory. * @args[0] is the number of lines to move the * user window up in page memory. New lines appear at the top of the * display. Old lines disappear at the bottom of the display. You * cannot pan past the top margin of the current page. 0 is treated * as 1. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; term_page_scroll_down(screen->page, num, &screen->attr, screen->age, NULL); return 0; } static int screen_SGR(term_screen *screen, const term_seq *seq) { /* * SGR - select-graphics-rendition */ term_color *dst; unsigned int i, code; int v; if (seq->n_args < 1) { zero(screen->attr); return 0; } for (i = 0; i < seq->n_args; ++i) { v = seq->args[i]; switch (v) { case 1: screen->attr.bold = 1; break; case 3: screen->attr.italic = 1; break; case 4: screen->attr.underline = 1; break; case 5: screen->attr.blink = 1; break; case 7: screen->attr.inverse = 1; break; case 8: screen->attr.hidden = 1; break; case 22: screen->attr.bold = 0; break; case 23: screen->attr.italic = 0; break; case 24: screen->attr.underline = 0; break; case 25: screen->attr.blink = 0; break; case 27: screen->attr.inverse = 0; break; case 28: screen->attr.hidden = 0; break; case 30 ... 37: screen->attr.fg.ccode = v - 30 + TERM_CCODE_BLACK; break; case 39: screen->attr.fg.ccode = 0; break; case 40 ... 47: screen->attr.bg.ccode = v - 40 + TERM_CCODE_BLACK; break; case 49: screen->attr.bg.ccode = 0; break; case 90 ... 97: screen->attr.fg.ccode = v - 90 + TERM_CCODE_LIGHT_BLACK; break; case 100 ... 107: screen->attr.bg.ccode = v - 100 + TERM_CCODE_LIGHT_BLACK; break; case 38: /* fallthrough */ case 48: if (v == 38) dst = &screen->attr.fg; else dst = &screen->attr.bg; ++i; if (i >= seq->n_args) break; switch (seq->args[i]) { case 2: /* 24bit-color support */ i += 3; if (i >= seq->n_args) break; dst->ccode = TERM_CCODE_RGB; dst->red = (seq->args[i - 2] >= 0) ? seq->args[i - 2] : 0; dst->green = (seq->args[i - 1] >= 0) ? seq->args[i - 1] : 0; dst->blue = (seq->args[i] >= 0) ? seq->args[i] : 0; break; case 5: /* 256-color support */ ++i; if (i >= seq->n_args || seq->args[i] < 0) break; dst->ccode = TERM_CCODE_256; code = seq->args[i]; dst->c256 = code < 256 ? code : 0; break; } break; case -1: /* fallthrough */ case 0: zero(screen->attr); break; } } return 0; } static int screen_SI(term_screen *screen, const term_seq *seq) { /* * SI - shift-in * Map G0 into GL. */ screen->gl = &screen->g0; return 0; } static int screen_SM_ANSI(term_screen *screen, const term_seq *seq) { /* * SM_ANSI - set-mode-ansi * * TODO: implement */ unsigned int i; for (i = 0; i < seq->n_args; ++i) screen_mode_change(screen, seq->args[i], false, true); return 0; } static int screen_SM_DEC(term_screen *screen, const term_seq *seq) { /* * SM_DEC - set-mode-dec * This is the same as SM_ANSI but for DEC modes. */ unsigned int i; for (i = 0; i < seq->n_args; ++i) screen_mode_change(screen, seq->args[i], true, true); return 0; } static int screen_SO(term_screen *screen, const term_seq *seq) { /* * SO - shift-out * Map G1 into GL. */ screen->gl = &screen->g1; return 0; } static int screen_SPA(term_screen *screen, const term_seq *seq) { /* * SPA - start-of-protected-area * * TODO: What is this? */ return 0; } static int screen_SS2(term_screen *screen, const term_seq *seq) { /* * SS2 - single-shift-2 * Temporarily map G2 into GL for the next graphics character. */ screen->glt = &screen->g2; return 0; } static int screen_SS3(term_screen *screen, const term_seq *seq) { /* * SS3 - single-shift-3 * Temporarily map G3 into GL for the next graphics character */ screen->glt = &screen->g3; return 0; } static int screen_ST(term_screen *screen, const term_seq *seq) { /* * ST - string-terminator * The string-terminator is usually part of control-sequences and * handled by the parser. In all other situations it is silently * ignored. */ return 0; } static int screen_SU(term_screen *screen, const term_seq *seq) { /* * SU - scroll-up * This control function moves the user window up a specified number of * lines in page memory. * @args[0] is the number of lines to move the * user window down in page memory. New lines appear at the bottom of * the display. Old lines disappear at the top of the display. You * cannot pan past the bottom margin of the current page. 0 is treated * as 1. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; term_page_scroll_up(screen->page, num, &screen->attr, screen->age, screen->history); return 0; } static int screen_SUB(term_screen *screen, const term_seq *seq) { /* * SUB - substitute * Cancel the current control-sequence and print a replacement * character. Our parser already handles this so all we have to do is * print the replacement character. */ static const term_seq rep = { .type = TERM_SEQ_GRAPHIC, .command = TERM_CMD_GRAPHIC, .terminator = 0xfffd, }; return screen_GRAPHIC(screen, &rep); } static int screen_TBC(term_screen *screen, const term_seq *seq) { /* * TBC - tab-clear * This clears tab-stops. If @args[0] is 0, the tab-stop at the current * cursor position is cleared. If it is 3, all tab stops are cleared. * * Defaults: * args[0]: 0 */ unsigned int mode = 0, pos; if (seq->args[0] > 0) mode = seq->args[0]; switch (mode) { case 0: pos = screen->cursor_x; if (screen->page->width > 0) screen->tabs[pos / 8] &= ~(1U << (pos % 8)); break; case 3: if (screen->page->width > 0) memset(screen->tabs, 0, (screen->page->width + 7) / 8); break; } return 0; } static int screen_VPA(term_screen *screen, const term_seq *seq) { /* * VPA - vertical-line-position-absolute * VPA causes the active position to be moved to the corresponding * horizontal position. @args[0] specifies the line to jump to. If an * attempt is made to move the active position below the last line, then * the active position stops on the last line. 0 is treated as 1. * * Defaults: * args[0]: 1 */ unsigned int pos = 1; if (seq->args[0] > 0) pos = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_set_rel(screen, screen->cursor_x, pos - 1); return 0; } static int screen_VPR(term_screen *screen, const term_seq *seq) { /* * VPR - vertical-line-position-relative * VPR causes the active position to be moved to the corresponding * horizontal position. @args[0] specifies the number of lines to jump * down relative to the current cursor position. If an attempt is made * to move the active position below the last line, the active position * stops at the last line. 0 is treated as 1. * * Defaults: * args[0]: 1 */ unsigned int num = 1; if (seq->args[0] > 0) num = seq->args[0]; screen_cursor_clear_wrap(screen); screen_cursor_down(screen, num, false); return 0; } static int screen_VT(term_screen *screen, const term_seq *seq) { /* * VT - vertical-tab * This causes a vertical jump by one line. Terminals treat it exactly * the same as LF. */ return screen_LF(screen, seq); } static int screen_XTERM_CLLHP(term_screen *screen, const term_seq *seq) { /* * XTERM_CLLHP - xterm-cursor-lower-left-hp-bugfix * Move the cursor to the lower-left corner of the page. This is an HP * bugfix by xterm. * * Probably not worth implementing. */ return 0; } static int screen_XTERM_IHMT(term_screen *screen, const term_seq *seq) { /* * XTERM_IHMT - xterm-initiate-highlight-mouse-tracking * * Probably not worth implementing. */ return 0; } static int screen_XTERM_MLHP(term_screen *screen, const term_seq *seq) { /* * XTERM_MLHP - xterm-memory-lock-hp-bugfix * * Probably not worth implementing. */ return 0; } static int screen_XTERM_MUHP(term_screen *screen, const term_seq *seq) { /* * XTERM_MUHP - xterm-memory-unlock-hp-bugfix * * Probably not worth implementing. */ return 0; } static int screen_XTERM_RPM(term_screen *screen, const term_seq *seq) { /* * XTERM_RPM - xterm-restore-private-mode * * Probably not worth implementing. */ return 0; } static int screen_XTERM_RRV(term_screen *screen, const term_seq *seq) { /* * XTERM_RRV - xterm-reset-resource-value * * Probably not worth implementing. */ return 0; } static int screen_XTERM_RTM(term_screen *screen, const term_seq *seq) { /* * XTERM_RTM - xterm-reset-title-mode * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SACL1(term_screen *screen, const term_seq *seq) { /* * XTERM_SACL1 - xterm-set-ansi-conformance-level-1 * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SACL2(term_screen *screen, const term_seq *seq) { /* * XTERM_SACL2 - xterm-set-ansi-conformance-level-2 * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SACL3(term_screen *screen, const term_seq *seq) { /* * XTERM_SACL3 - xterm-set-ansi-conformance-level-3 * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SDCS(term_screen *screen, const term_seq *seq) { /* * XTERM_SDCS - xterm-set-default-character-set * Select the default character set. We treat this the same as UTF-8 as * this is our default character set. As we always use UTF-8, this * becomes as no-op. */ return 0; } static int screen_XTERM_SGFX(term_screen *screen, const term_seq *seq) { /* * XTERM_SGFX - xterm-sixel-graphics * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SPM(term_screen *screen, const term_seq *seq) { /* * XTERM_SPM - xterm-set-private-mode * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SRV(term_screen *screen, const term_seq *seq) { /* * XTERM_SRV - xterm-set-resource-value * * Probably not worth implementing. */ return 0; } static int screen_XTERM_STM(term_screen *screen, const term_seq *seq) { /* * XTERM_STM - xterm-set-title-mode * * Probably not worth implementing. */ return 0; } static int screen_XTERM_SUCS(term_screen *screen, const term_seq *seq) { /* * XTERM_SUCS - xterm-select-utf8-character-set * Select UTF-8 as character set. This is our default on only character * set. Hence, this is a no-op. */ return 0; } static int screen_XTERM_WM(term_screen *screen, const term_seq *seq) { /* * XTERM_WM - xterm-window-management * * Probably not worth implementing. */ return 0; } /* * Feeding data * The screen_feed_*() handlers take data from the user and feed it into the * screen. Once the parser has detected a sequence, we parse the command-type * and forward it to the command-dispatchers. */ static int screen_feed_cmd(term_screen *screen, const term_seq *seq) { switch (seq->command) { case TERM_CMD_GRAPHIC: return screen_GRAPHIC(screen, seq); case TERM_CMD_BEL: return screen_BEL(screen, seq); case TERM_CMD_BS: return screen_BS(screen, seq); case TERM_CMD_CBT: return screen_CBT(screen, seq); case TERM_CMD_CHA: return screen_CHA(screen, seq); case TERM_CMD_CHT: return screen_CHT(screen, seq); case TERM_CMD_CNL: return screen_CNL(screen, seq); case TERM_CMD_CPL: return screen_CPL(screen, seq); case TERM_CMD_CR: return screen_CR(screen, seq); case TERM_CMD_CUB: return screen_CUB(screen, seq); case TERM_CMD_CUD: return screen_CUD(screen, seq); case TERM_CMD_CUF: return screen_CUF(screen, seq); case TERM_CMD_CUP: return screen_CUP(screen, seq); case TERM_CMD_CUU: return screen_CUU(screen, seq); case TERM_CMD_DA1: return screen_DA1(screen, seq); case TERM_CMD_DA2: return screen_DA2(screen, seq); case TERM_CMD_DA3: return screen_DA3(screen, seq); case TERM_CMD_DC1: return screen_DC1(screen, seq); case TERM_CMD_DC3: return screen_DC3(screen, seq); case TERM_CMD_DCH: return screen_DCH(screen, seq); case TERM_CMD_DECALN: return screen_DECALN(screen, seq); case TERM_CMD_DECANM: return screen_DECANM(screen, seq); case TERM_CMD_DECBI: return screen_DECBI(screen, seq); case TERM_CMD_DECCARA: return screen_DECCARA(screen, seq); case TERM_CMD_DECCRA: return screen_DECCRA(screen, seq); case TERM_CMD_DECDC: return screen_DECDC(screen, seq); case TERM_CMD_DECDHL_BH: return screen_DECDHL_BH(screen, seq); case TERM_CMD_DECDHL_TH: return screen_DECDHL_TH(screen, seq); case TERM_CMD_DECDWL: return screen_DECDWL(screen, seq); case TERM_CMD_DECEFR: return screen_DECEFR(screen, seq); case TERM_CMD_DECELF: return screen_DECELF(screen, seq); case TERM_CMD_DECELR: return screen_DECELR(screen, seq); case TERM_CMD_DECERA: return screen_DECERA(screen, seq); case TERM_CMD_DECFI: return screen_DECFI(screen, seq); case TERM_CMD_DECFRA: return screen_DECFRA(screen, seq); case TERM_CMD_DECIC: return screen_DECIC(screen, seq); case TERM_CMD_DECID: return screen_DECID(screen, seq); case TERM_CMD_DECINVM: return screen_DECINVM(screen, seq); case TERM_CMD_DECKBD: return screen_DECKBD(screen, seq); case TERM_CMD_DECKPAM: return screen_DECKPAM(screen, seq); case TERM_CMD_DECKPNM: return screen_DECKPNM(screen, seq); case TERM_CMD_DECLFKC: return screen_DECLFKC(screen, seq); case TERM_CMD_DECLL: return screen_DECLL(screen, seq); case TERM_CMD_DECLTOD: return screen_DECLTOD(screen, seq); case TERM_CMD_DECPCTERM: return screen_DECPCTERM(screen, seq); case TERM_CMD_DECPKA: return screen_DECPKA(screen, seq); case TERM_CMD_DECPKFMR: return screen_DECPKFMR(screen, seq); case TERM_CMD_DECRARA: return screen_DECRARA(screen, seq); case TERM_CMD_DECRC: return screen_DECRC(screen, seq); case TERM_CMD_DECREQTPARM: return screen_DECREQTPARM(screen, seq); case TERM_CMD_DECRPKT: return screen_DECRPKT(screen, seq); case TERM_CMD_DECRQCRA: return screen_DECRQCRA(screen, seq); case TERM_CMD_DECRQDE: return screen_DECRQDE(screen, seq); case TERM_CMD_DECRQKT: return screen_DECRQKT(screen, seq); case TERM_CMD_DECRQLP: return screen_DECRQLP(screen, seq); case TERM_CMD_DECRQM_ANSI: return screen_DECRQM_ANSI(screen, seq); case TERM_CMD_DECRQM_DEC: return screen_DECRQM_DEC(screen, seq); case TERM_CMD_DECRQPKFM: return screen_DECRQPKFM(screen, seq); case TERM_CMD_DECRQPSR: return screen_DECRQPSR(screen, seq); case TERM_CMD_DECRQTSR: return screen_DECRQTSR(screen, seq); case TERM_CMD_DECRQUPSS: return screen_DECRQUPSS(screen, seq); case TERM_CMD_DECSACE: return screen_DECSACE(screen, seq); case TERM_CMD_DECSASD: return screen_DECSASD(screen, seq); case TERM_CMD_DECSC: return screen_DECSC(screen, seq); case TERM_CMD_DECSCA: return screen_DECSCA(screen, seq); case TERM_CMD_DECSCL: return screen_DECSCL(screen, seq); case TERM_CMD_DECSCP: return screen_DECSCP(screen, seq); case TERM_CMD_DECSCPP: return screen_DECSCPP(screen, seq); case TERM_CMD_DECSCS: return screen_DECSCS(screen, seq); case TERM_CMD_DECSCUSR: return screen_DECSCUSR(screen, seq); case TERM_CMD_DECSDDT: return screen_DECSDDT(screen, seq); case TERM_CMD_DECSDPT: return screen_DECSDPT(screen, seq); case TERM_CMD_DECSED: return screen_DECSED(screen, seq); case TERM_CMD_DECSEL: return screen_DECSEL(screen, seq); case TERM_CMD_DECSERA: return screen_DECSERA(screen, seq); case TERM_CMD_DECSFC: return screen_DECSFC(screen, seq); case TERM_CMD_DECSKCV: return screen_DECSKCV(screen, seq); case TERM_CMD_DECSLCK: return screen_DECSLCK(screen, seq); case TERM_CMD_DECSLE: return screen_DECSLE(screen, seq); case TERM_CMD_DECSLPP: return screen_DECSLPP(screen, seq); case TERM_CMD_DECSLRM_OR_SC: return screen_DECSLRM_OR_SC(screen, seq); case TERM_CMD_DECSMBV: return screen_DECSMBV(screen, seq); case TERM_CMD_DECSMKR: return screen_DECSMKR(screen, seq); case TERM_CMD_DECSNLS: return screen_DECSNLS(screen, seq); case TERM_CMD_DECSPP: return screen_DECSPP(screen, seq); case TERM_CMD_DECSPPCS: return screen_DECSPPCS(screen, seq); case TERM_CMD_DECSPRTT: return screen_DECSPRTT(screen, seq); case TERM_CMD_DECSR: return screen_DECSR(screen, seq); case TERM_CMD_DECSRFR: return screen_DECSRFR(screen, seq); case TERM_CMD_DECSSCLS: return screen_DECSSCLS(screen, seq); case TERM_CMD_DECSSDT: return screen_DECSSDT(screen, seq); case TERM_CMD_DECSSL: return screen_DECSSL(screen, seq); case TERM_CMD_DECST8C: return screen_DECST8C(screen, seq); case TERM_CMD_DECSTBM: return screen_DECSTBM(screen, seq); case TERM_CMD_DECSTR: return screen_DECSTR(screen, seq); case TERM_CMD_DECSTRL: return screen_DECSTRL(screen, seq); case TERM_CMD_DECSWBV: return screen_DECSWBV(screen, seq); case TERM_CMD_DECSWL: return screen_DECSWL(screen, seq); case TERM_CMD_DECTID: return screen_DECTID(screen, seq); case TERM_CMD_DECTME: return screen_DECTME(screen, seq); case TERM_CMD_DECTST: return screen_DECTST(screen, seq); case TERM_CMD_DL: return screen_DL(screen, seq); case TERM_CMD_DSR_ANSI: return screen_DSR_ANSI(screen, seq); case TERM_CMD_DSR_DEC: return screen_DSR_DEC(screen, seq); case TERM_CMD_ECH: return screen_ECH(screen, seq); case TERM_CMD_ED: return screen_ED(screen, seq); case TERM_CMD_EL: return screen_EL(screen, seq); case TERM_CMD_ENQ: return screen_ENQ(screen, seq); case TERM_CMD_EPA: return screen_EPA(screen, seq); case TERM_CMD_FF: return screen_FF(screen, seq); case TERM_CMD_HPA: return screen_HPA(screen, seq); case TERM_CMD_HPR: return screen_HPR(screen, seq); case TERM_CMD_HT: return screen_HT(screen, seq); case TERM_CMD_HTS: return screen_HTS(screen, seq); case TERM_CMD_HVP: return screen_HVP(screen, seq); case TERM_CMD_ICH: return screen_ICH(screen, seq); case TERM_CMD_IL: return screen_IL(screen, seq); case TERM_CMD_IND: return screen_IND(screen, seq); case TERM_CMD_LF: return screen_LF(screen, seq); case TERM_CMD_LS1R: return screen_LS1R(screen, seq); case TERM_CMD_LS2: return screen_LS2(screen, seq); case TERM_CMD_LS2R: return screen_LS2R(screen, seq); case TERM_CMD_LS3: return screen_LS3(screen, seq); case TERM_CMD_LS3R: return screen_LS3R(screen, seq); case TERM_CMD_MC_ANSI: return screen_MC_ANSI(screen, seq); case TERM_CMD_MC_DEC: return screen_MC_DEC(screen, seq); case TERM_CMD_NEL: return screen_NEL(screen, seq); case TERM_CMD_NP: return screen_NP(screen, seq); case TERM_CMD_NULL: return screen_NULL(screen, seq); case TERM_CMD_PP: return screen_PP(screen, seq); case TERM_CMD_PPA: return screen_PPA(screen, seq); case TERM_CMD_PPB: return screen_PPB(screen, seq); case TERM_CMD_PPR: return screen_PPR(screen, seq); case TERM_CMD_RC: return screen_RC(screen, seq); case TERM_CMD_REP: return screen_REP(screen, seq); case TERM_CMD_RI: return screen_RI(screen, seq); case TERM_CMD_RIS: return screen_RIS(screen, seq); case TERM_CMD_RM_ANSI: return screen_RM_ANSI(screen, seq); case TERM_CMD_RM_DEC: return screen_RM_DEC(screen, seq); case TERM_CMD_S7C1T: return screen_S7C1T(screen, seq); case TERM_CMD_S8C1T: return screen_S8C1T(screen, seq); case TERM_CMD_SCS: return screen_SCS(screen, seq); case TERM_CMD_SD: return screen_SD(screen, seq); case TERM_CMD_SGR: return screen_SGR(screen, seq); case TERM_CMD_SI: return screen_SI(screen, seq); case TERM_CMD_SM_ANSI: return screen_SM_ANSI(screen, seq); case TERM_CMD_SM_DEC: return screen_SM_DEC(screen, seq); case TERM_CMD_SO: return screen_SO(screen, seq); case TERM_CMD_SPA: return screen_SPA(screen, seq); case TERM_CMD_SS2: return screen_SS2(screen, seq); case TERM_CMD_SS3: return screen_SS3(screen, seq); case TERM_CMD_ST: return screen_ST(screen, seq); case TERM_CMD_SU: return screen_SU(screen, seq); case TERM_CMD_SUB: return screen_SUB(screen, seq); case TERM_CMD_TBC: return screen_TBC(screen, seq); case TERM_CMD_VPA: return screen_VPA(screen, seq); case TERM_CMD_VPR: return screen_VPR(screen, seq); case TERM_CMD_VT: return screen_VT(screen, seq); case TERM_CMD_XTERM_CLLHP: return screen_XTERM_CLLHP(screen, seq); case TERM_CMD_XTERM_IHMT: return screen_XTERM_IHMT(screen, seq); case TERM_CMD_XTERM_MLHP: return screen_XTERM_MLHP(screen, seq); case TERM_CMD_XTERM_MUHP: return screen_XTERM_MUHP(screen, seq); case TERM_CMD_XTERM_RPM: return screen_XTERM_RPM(screen, seq); case TERM_CMD_XTERM_RRV: return screen_XTERM_RRV(screen, seq); case TERM_CMD_XTERM_RTM: return screen_XTERM_RTM(screen, seq); case TERM_CMD_XTERM_SACL1: return screen_XTERM_SACL1(screen, seq); case TERM_CMD_XTERM_SACL2: return screen_XTERM_SACL2(screen, seq); case TERM_CMD_XTERM_SACL3: return screen_XTERM_SACL3(screen, seq); case TERM_CMD_XTERM_SDCS: return screen_XTERM_SDCS(screen, seq); case TERM_CMD_XTERM_SGFX: return screen_XTERM_SGFX(screen, seq); case TERM_CMD_XTERM_SPM: return screen_XTERM_SPM(screen, seq); case TERM_CMD_XTERM_SRV: return screen_XTERM_SRV(screen, seq); case TERM_CMD_XTERM_STM: return screen_XTERM_STM(screen, seq); case TERM_CMD_XTERM_SUCS: return screen_XTERM_SUCS(screen, seq); case TERM_CMD_XTERM_WM: return screen_XTERM_WM(screen, seq); } return 0; } unsigned int term_screen_get_width(term_screen *screen) { assert_return(screen, -EINVAL); return screen->page->width; } unsigned int term_screen_get_height(term_screen *screen) { assert_return(screen, -EINVAL); return screen->page->height; } int term_screen_feed_text(term_screen *screen, const uint8_t *in, size_t size) { uint32_t *ucs4_str; size_t i, j, ucs4_len; const term_seq *seq; int r; assert_return(screen, -EINVAL); /* Feed bytes into utf8 decoder and handle parsed ucs4 chars. We always * treat data as UTF-8, but the parser makes sure to fall back to raw * 8bit mode if the stream is not valid UTF-8. This should be more than * enough to support old 7bit/8bit modes. */ for (i = 0; i < size; ++i) { ucs4_len = term_utf8_decode(&screen->utf8, &ucs4_str, in[i]); for (j = 0; j < ucs4_len; ++j) { r = term_parser_feed(screen->parser, &seq, ucs4_str[j]); if (r < 0) { return r; } else if (r != TERM_SEQ_NONE) { r = screen_feed_cmd(screen, seq); if (r < 0) return r; } } } return 0; } static char *screen_map_key(term_screen *screen, char *p, const uint32_t *keysyms, size_t n_syms, uint32_t ascii, const uint32_t *ucs4, unsigned int mods) { char ch, ch2, ch_mods; uint32_t v; size_t i; /* TODO: All these key-mappings need to be verified. Public information * on those mappings is pretty scarce and every emulator seems to do it * slightly differently. * A lot of mappings are also missing. */ if (n_syms < 1) return p; if (n_syms == 1) v = keysyms[0]; else v = XKB_KEY_NoSymbol; /* In some mappings, the modifiers are encoded as CSI parameters. The * encoding is rather arbitrary, but seems to work. */ ch_mods = 0; switch (mods & (TERM_KBDMOD_SHIFT | TERM_KBDMOD_ALT | TERM_KBDMOD_CTRL)) { case TERM_KBDMOD_SHIFT: ch_mods = '2'; break; case TERM_KBDMOD_ALT: ch_mods = '3'; break; case TERM_KBDMOD_SHIFT | TERM_KBDMOD_ALT: ch_mods = '4'; break; case TERM_KBDMOD_CTRL: ch_mods = '5'; break; case TERM_KBDMOD_CTRL | TERM_KBDMOD_SHIFT: ch_mods = '6'; break; case TERM_KBDMOD_CTRL | TERM_KBDMOD_ALT: ch_mods = '7'; break; case TERM_KBDMOD_CTRL | TERM_KBDMOD_SHIFT | TERM_KBDMOD_ALT: ch_mods = '8'; break; } /* A user might actually use multiple layouts for keyboard * input. @keysyms[0] contains the actual keysym that the user * used. But if this keysym is not in the ascii range, the * input handler does check all other layouts that the user * specified whether one of them maps the key to some ASCII * keysym and provides this via @ascii. We always use the real * keysym except when handling CTRL+ shortcuts we use the * ascii keysym. This is for compatibility to xterm et. al. so * ctrl+c always works regardless of the currently active * keyboard layout. But if no ascii-sym is found, we still use * the real keysym. */ if (ascii == XKB_KEY_NoSymbol) ascii = v; /* map CTRL+ */ if (mods & TERM_KBDMOD_CTRL) { switch (ascii) { case 0x60 ... 0x7e: /* Right hand side is mapped to the left and then * treated equally. Fall through to left-hand side.. */ ascii -= 0x20; case 0x20 ... 0x5f: /* Printable ASCII is mapped 1-1 in XKB and in * combination with CTRL bit 7 is flipped. This * is equivalent to the caret-notation. */ *p++ = ascii ^ 0x40; return p; } } /* map cursor keys */ ch = 0; switch (v) { case XKB_KEY_Up: ch = 'A'; break; case XKB_KEY_Down: ch = 'B'; break; case XKB_KEY_Right: ch = 'C'; break; case XKB_KEY_Left: ch = 'D'; break; case XKB_KEY_Home: ch = 'H'; break; case XKB_KEY_End: ch = 'F'; break; } if (ch) { *p++ = 0x1b; if (screen->flags & TERM_FLAG_CURSOR_KEYS) *p++ = 'O'; else *p++ = '['; if (ch_mods) { *p++ = '1'; *p++ = ';'; *p++ = ch_mods; } *p++ = ch; return p; } /* map action keys */ ch = 0; switch (v) { case XKB_KEY_Find: ch = '1'; break; case XKB_KEY_Insert: ch = '2'; break; case XKB_KEY_Delete: ch = '3'; break; case XKB_KEY_Select: ch = '4'; break; case XKB_KEY_Page_Up: ch = '5'; break; case XKB_KEY_Page_Down: ch = '6'; break; } if (ch) { *p++ = 0x1b; *p++ = '['; *p++ = ch; if (ch_mods) { *p++ = ';'; *p++ = ch_mods; } *p++ = '~'; return p; } /* map lower function keys */ ch = 0; switch (v) { case XKB_KEY_F1: ch = 'P'; break; case XKB_KEY_F2: ch = 'Q'; break; case XKB_KEY_F3: ch = 'R'; break; case XKB_KEY_F4: ch = 'S'; break; } if (ch) { if (ch_mods) { *p++ = 0x1b; *p++ = '['; *p++ = '1'; *p++ = ';'; *p++ = ch_mods; *p++ = ch; } else { *p++ = 0x1b; *p++ = 'O'; *p++ = ch; } return p; } /* map upper function keys */ ch = 0; ch2 = 0; switch (v) { case XKB_KEY_F5: ch = '1'; ch2 = '5'; break; case XKB_KEY_F6: ch = '1'; ch2 = '7'; break; case XKB_KEY_F7: ch = '1'; ch2 = '8'; break; case XKB_KEY_F8: ch = '1'; ch2 = '9'; break; case XKB_KEY_F9: ch = '2'; ch2 = '0'; break; case XKB_KEY_F10: ch = '2'; ch2 = '1'; break; case XKB_KEY_F11: ch = '2'; ch2 = '2'; break; case XKB_KEY_F12: ch = '2'; ch2 = '3'; break; } if (ch) { *p++ = 0x1b; *p++ = '['; *p++ = ch; if (ch2) *p++ = ch2; if (ch_mods) { *p++ = ';'; *p++ = ch_mods; } *p++ = '~'; return p; } /* map special keys */ switch (v) { case 0xff08: /* XKB_KEY_BackSpace */ case 0xff09: /* XKB_KEY_Tab */ case 0xff0a: /* XKB_KEY_Linefeed */ case 0xff0b: /* XKB_KEY_Clear */ case 0xff15: /* XKB_KEY_Sys_Req */ case 0xff1b: /* XKB_KEY_Escape */ case 0xffff: /* XKB_KEY_Delete */ *p++ = v - 0xff00; return p; case 0xff13: /* XKB_KEY_Pause */ /* TODO: What should we do with this key? * Sending XOFF is awful as there is no simple * way on modern keyboards to send XON again. * If someone wants this, we can re-eanble * optionally. */ return p; case 0xff14: /* XKB_KEY_Scroll_Lock */ /* TODO: What should we do on scroll-lock? * Sending 0x14 is what the specs say but it is * not used today the way most users would * expect so we disable it. If someone wants * this, we can re-enable it (optionally). */ return p; case XKB_KEY_Return: *p++ = 0x0d; if (screen->flags & TERM_FLAG_NEWLINE_MODE) *p++ = 0x0a; return p; case XKB_KEY_ISO_Left_Tab: *p++ = 0x09; return p; } /* map unicode keys */ for (i = 0; i < n_syms; ++i) p += term_utf8_encode(p, ucs4[i]); return p; } int term_screen_feed_keyboard(term_screen *screen, const uint32_t *keysyms, size_t n_syms, uint32_t ascii, const uint32_t *ucs4, unsigned int mods) { _cleanup_free_ char *dyn = NULL; static const size_t padding = 1; char buf[128], *start, *p = buf; assert_return(screen, -EINVAL); /* allocate buffer if too small */ start = buf; if (4 * n_syms + padding > sizeof(buf)) { dyn = malloc(4 * n_syms + padding); if (!dyn) return -ENOMEM; start = dyn; } /* reserve prefix space */ start += padding; p = start; p = screen_map_key(screen, p, keysyms, n_syms, ascii, ucs4, mods); if (!p || p - start < 1) return 0; /* The ALT modifier causes ESC to be prepended to any key-stroke. We * already accounted for that buffer space above, so simply prepend it * here. * TODO: is altSendsEscape a suitable default? What are the semantics * exactly? Is it used in C0/C1 conversion? Is it prepended if there * already is an escape character? */ if (mods & TERM_KBDMOD_ALT && *start != 0x1b) *--start = 0x1b; /* turn C0 into C1 */ if (!(screen->flags & TERM_FLAG_7BIT_MODE) && p - start >= 2) if (start[0] == 0x1b && start[1] >= 0x40 && start[1] <= 0x5f) *++start ^= 0x40; return screen_write(screen, start, p - start); } int term_screen_resize(term_screen *screen, unsigned int x, unsigned int y) { unsigned int i; uint8_t *t; int r; assert_return(screen, -EINVAL); r = term_page_reserve(screen->page_main, x, y, &screen->attr, screen->age); if (r < 0) return r; r = term_page_reserve(screen->page_alt, x, y, &screen->attr, screen->age); if (r < 0) return r; if (x > screen->n_tabs) { t = realloc(screen->tabs, (x + 7) / 8); if (!t) return -ENOMEM; screen->tabs = t; screen->n_tabs = x; } for (i = (screen->page->width + 7) / 8 * 8; i < x; i += 8) screen->tabs[i / 8] = 0x1; term_page_resize(screen->page_main, x, y, &screen->attr, screen->age, screen->history); term_page_resize(screen->page_alt, x, y, &screen->attr, screen->age, NULL); screen->cursor_x = screen_clamp_x(screen, screen->cursor_x); screen->cursor_y = screen_clamp_x(screen, screen->cursor_y); screen_cursor_clear_wrap(screen); return 0; } void term_screen_soft_reset(term_screen *screen) { unsigned int i; assert(screen); screen->gl = &screen->g0; screen->gr = &screen->g1; screen->glt = NULL; screen->grt = NULL; screen->g0 = &term_unicode_lower; screen->g1 = &term_unicode_upper; screen->g2 = &term_unicode_lower; screen->g3 = &term_unicode_upper; screen->page = screen->page_main; screen->history = screen->history_main; screen->flags = TERM_FLAG_7BIT_MODE; screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400; screen->attr = screen->default_attr; screen->saved.cursor_x = 0; screen->saved.cursor_y = 0; screen->saved.attr = screen->attr; screen->saved.gl = screen->gl; screen->saved.gr = screen->gr; screen->saved.glt = NULL; screen->saved.grt = NULL; screen->flags = 0; for (i = 0; i < screen->page->width; i += 8) screen->tabs[i / 8] = 0x1; term_page_set_scroll_region(screen->page_main, 0, screen->page->height); term_page_set_scroll_region(screen->page_alt, 0, screen->page->height); } void term_screen_hard_reset(term_screen *screen) { assert(screen); term_screen_soft_reset(screen); zero(screen->utf8); screen->cursor_x = 0; screen->cursor_y = 0; term_page_erase(screen->page_main, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false); term_page_erase(screen->page_alt, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false); } int term_screen_set_answerback(term_screen *screen, const char *answerback) { char *t = NULL; assert_return(screen, -EINVAL); if (answerback) { t = strdup(answerback); if (!t) return -ENOMEM; } free(screen->answerback); screen->answerback = t; return 0; } int term_screen_draw(term_screen *screen, int (*draw_fn) (term_screen *screen, void *userdata, unsigned int x, unsigned int y, const term_attr *attr, const uint32_t *ch, size_t n_ch, unsigned int ch_width), void *userdata, uint64_t *fb_age) { uint64_t cell_age, line_age, age = 0; term_charbuf_t ch_buf; const uint32_t *ch_str; unsigned int i, j, cw; term_page *page; term_line *line; term_cell *cell; size_t ch_n; int r; assert(screen); assert(draw_fn); if (fb_age) age = *fb_age; page = screen->page; for (j = 0; j < page->height; ++j) { line = page->lines[j]; line_age = MAX(line->age, page->age); for (i = 0; i < page->width; ++i) { term_attr attr; cell = &line->cells[i]; cell_age = MAX(cell->age, line_age); if (age != 0 && cell_age <= age) continue; ch_str = term_char_resolve(cell->ch, &ch_n, &ch_buf); /* Character-width of 0 is used for cleared cells. * Always treat this as single-cell character, so * renderers can assume ch_width is set properpy. */ cw = MAX(cell->cwidth, 1U); attr = cell->attr; if (i == screen->cursor_x && j == screen->cursor_y && !(screen->flags & TERM_FLAG_HIDE_CURSOR)) attr.inverse ^= 1; r = draw_fn(screen, userdata, i, j, &attr, ch_str, ch_n, cw); if (r != 0) return r; } } if (fb_age) *fb_age = screen->age++; return 0; }