path: root/NEWS

systemd System and Service Manager

CHANGES WITH 213:

        * A new "systemd-timesyncd" daemon has been added for
          synchronizing the system clock across the network. It
          implements an SNTP client. In contrast to NTP
          implementations such as chrony or the NTP reference server
          this only implements a client side, and does not bother with
          the full NTP complexity, focusing only on querying time
          from one remote server and synchronizing the local clock to
          it. Unless you intend to serve NTP to networked clients or
          want to connect to local hardware clocks this simple NTP
          client should be more than appropriate for most
          installations. The daemon runs with minimal privileges, and
          has been hooked up with networkd to only operate when
          network connectivity is available. The daemon saves the
          current clock to disk every time a new NTP sync has been
          acquired, and uses this to possibly correct the system clock
          early at bootup, in order to accommodate for systems that
          lack an RTC such as the Raspberry Pi and embedded devices,
          and make sure that time monotonically progresses on these
          systems, even if it is not always correct.

        * The queue "seqnum" interface of libudev has been disabled, as
          it was generally incompatible with device namespacing as
          sequence numbers of devices go "missing" if the devices are
          part of a different namespace.

        * "systemctl list-timers" and "systemctl list-sockets" gained
          a --recursive switch for showing units of these types also
          for all local containers, similar in style to the
          --recursive switch "systemctl list-units" already supports.

        * A new RebootArgument= setting has been added for service
          units, which may be used to specify a kernel reboot argument
          for usage when triggering reboots with StartLimitAction=.

        * A new FailureAction= setting has been added for service
          units which may be used to specify an operation to trigger
          when a service fails. This works similar to
          StartLimitAction=, but unlike it controls what is done
          immediately rather than only after several attempts to
          restart the service in question.

        * hostnamed got updated to also expose the kernel name,
          release and version on the bus. This is useful for executing
          commands like hostnamectl with the -H switch.

        * The bootchart tool can now show cgroup information in the
          graphs it generates.

        * The CFS CPU quota cgroup attribute is now exposed for
          services. The new CPUQuota= switch has been added for this
          which takes a percentage value. Setting this will have the
          result that a service may never get more CPU time than the
          specified percentage, even if the machine is otherwise idle.

        * systemd-networkd learned IPIP and SIT tunnel support.

        * LSB init scripts exposing a dependency on $network will now
          get a dependency on network-online.target rather than simply
          network.target. This should bring LSB handling closer to
          what it was on SysV systems.

        * A new fsck.repair= kernel option has been added to control
          how fsck shall deal with unclean file systems at boot.

        * The (.ini) configuration file parser will now silently
          ignore sections whose name begins with "X-". This may be
          used to maintain application-specific extension sections in unit
          files.

        * machined gained a new API to query the IP addresses of
          registered containers. "machinectl status" has been updated
          to show these addresses in its output.

        * A new call sd_uid_get_display() has been added to the
          sd-login APIs for querying the "primary" session of a
          user. The "primary" session of the user is elected from the
          user's sessions and generally a graphical session is
          preferred over a text one.

        * A minimal systemd-resolved daemon has been added. It
          currently simply acts as a companion to systemd-networkd and
          manages resolv.conf based on per-interface DNS
          configuration, possibly supplied via DHCP. In the long run
          we hope to extend this into a local DNSSEC enabled DNS and
          mDNS cache.

        * Two new service options StartupCPUShares= and
          StartupBlockIOWeight= have been added that work similar to
          CPUShares= and BlockIOWeight= however only apply during
          system startup. This is useful to prioritize certain services
          differently during bootup than during normal runtime.

        Contributions from: Ali H. Caliskan, Alison Chaiken, Bas van
        den Berg, Brandon Philips, Cristian Rodríguez, Daniel Buch,
        Dan Kilman, Dave Reisner, David Härdeman, David Herrmann,
        David Strauss, Dimitris Spingos, Djalal Harouni, Eelco
        Dolstra, Evan Nemerson, Florian Albrechtskirchinger, Greg
        Kroah-Hartman, Harald Hoyer, Holger Hans Peter Freyther, Jan
        Engelhardt, Jani Nikula, Jason St. John, Jeffrey Clark,
        Jonathan Boulle, Kay Sievers, Lennart Poettering, Lukas
        Nykryn, Lukasz Skalski, Łukasz Stelmach, Mantas Mikulėnas,
        Marcel Holtmann, Matthew Monaco, Michael Marineau, Michael
        Olbrich, Michal Sekletar, Mike Gilbert, Nis Martensen, Patrik
        Flykt, Philip Lorenz, poma, Ray Strode, Robert Milasan, Scott
        Thrasher, Steven Siloti, Susant Sahani, Tanu Kaskinen, Thomas
        Bächler, Thomas Hindoe Paaboel Andersen, Tom Gundersen, Umut
        Tezduyar Lindskog, WaLyong Cho, Will Woods, Zbigniew
        Jędrzejewski-Szmek

        -- Beijing, 2014-05-24

CHANGES WITH 212:

        * When restoring the screen brightness at boot, stay away from
          the darkest setting or from the lowest 5% of the available
          range, depending on which is the larger value of both. This
          should effectively protect the user from rebooting into a
          black screen, should the brightness have been set to minimum
          by accident.

        * sd-login gained a new sd_machine_get_class() call to
          determine the class ("vm" or "container") of a machine
          registered with machined.

        * sd-login gained new calls
          sd_peer_get_{session,owner_uid,unit,user_unit,slice,machine_name}(),
          to query the identity of the peer of a local AF_UNIX
          connection. They operate similar to their sd_pid_get_xyz()
          counterparts.

        * PID 1 will now maintain a system-wide system state engine
          with the states "starting", "running", "degraded",
          "maintenance", "stopping". These states are bound to system
          startup, normal runtime, runtime with at least one failed
          service, rescue/emergency mode and system shutdown. This
          state is shown in the "systemctl status" output when no unit
          name is passed. It is useful to determine system state, in
          particularly when doing so for many systems or containers at
          once.

        * A new command "list-machines" has been added to "systemctl"
          that lists all local OS containers and shows their system
          state (see above), if systemd runs inside of them.

        * systemctl gained a new "-r" switch to recursively enumerate
          units on all local containers, when used with the
          "list-unit" command (which is the default one that is
          executed when no parameters are specified).

        * The GPT automatic partition discovery logic will now honour
          two GPT partition flags: one may be set on a partition to
          cause it to be mounted read-only, and the other may be set
          on a partition to ignore it during automatic discovery.

        * Two new GPT type UUIDs have been added for automatic root
          partition discovery, for 32-bit and 64-bit ARM. This is not
          particularly useful for discovering the root directory on
          these architectures during bare-metal boots (since UEFI is
          not common there), but still very useful to allow booting of
          ARM disk images in nspawn with the -i option.

        * MAC addresses of interfaces created with nspawn's
          --network-interface= switch will now be generated from the
          machine name, and thus be stable between multiple invocations
          of the container.

        * logind will now automatically remove all IPC objects owned
          by a user if she or he fully logs out. This makes sure that
          users who are logged out cannot continue to consume IPC
          resources. This covers SysV memory, semaphores and message
          queues as well as POSIX shared memory and message
          queues. Traditionally, SysV and POSIX IPC had no life-cycle
          limits. With this functionality, that is corrected. This may
          be turned off by using the RemoveIPC= switch of logind.conf.

        * The systemd-machine-id-setup and tmpfiles tools gained a
          --root= switch to operate on a specific root directory,
          instead of /.

        * journald can now forward logged messages to the TTYs of all
          logged in users ("wall"). This is the default for all
          emergency messages now.

        * A new tool systemd-journal-remote has been added to stream
          journal log messages across the network.

        * /sys/fs/cgroup/ is now mounted read-only after all cgroup
          controller trees are mounted into it. Note that the
          directories mounted beneath it are not read-only. This is a
          security measure and is particularly useful because glibc
          actually includes a search logic to pick any tmpfs it can
          find to implement shm_open() if /dev/shm is not available
          (which it might very well be in namespaced setups).

        * machinectl gained a new "poweroff" command to cleanly power
          down a local OS container.

        * The PrivateDevices= unit file setting will now also drop the
          CAP_MKNOD capability from the capability bound set, and
          imply DevicePolicy=closed.

        * PrivateDevices=, PrivateNetwork= and PrivateTmp= is now used
          comprehensively on all long-running systemd services where
          this is appropriate.

        * systemd-udevd will now run in a disassociated mount
          namespace. To mount directories from udev rules, make sure to
          pull in mount units via SYSTEMD_WANTS properties.

        * The kdbus support gained support for uploading policy into
          the kernel. sd-bus gained support for creating "monitoring"
          connections that can eavesdrop into all bus communication
          for debugging purposes.

        * Timestamps may now be specified in seconds since the UNIX
          epoch Jan 1st, 1970 by specifying "@" followed by the value
          in seconds.

        * Native tcpwrap support in systemd has been removed. tcpwrap
          is old code, not really maintained anymore and has serious
          shortcomings, and better options such as firewalls
          exist. For setups that require tcpwrap usage, please
          consider invoking your socket-activated service via tcpd,
          like on traditional inetd.

        * A new system.conf configuration option
          DefaultTimerAccuracySec= has been added that controls the
          default AccuracySec= setting of .timer units.

        * Timer units gained a new WakeSystem= switch. If enabled,
          timers configured this way will cause the system to resume
          from system suspend (if the system supports that, which most
          do these days).

        * Timer units gained a new Persistent= switch. If enabled,
          timers configured this way will save to disk when they have
          been last triggered. This information is then used on next
          reboot to possible execute overdue timer events, that
          could not take place because the system was powered off.
          This enables simple anacron-like behaviour for timer units.

        * systemctl's "list-timers" will now also list the time a
          timer unit was last triggered in addition to the next time
          it will be triggered.

        * systemd-networkd will now assign predictable IPv4LL
          addresses to its local interfaces.

        Contributions from: Brandon Philips, Daniel Buch, Daniel Mack,
        Dave Reisner, David Herrmann, Gerd Hoffmann, Greg
        Kroah-Hartman, Hendrik Brueckner, Jason St. John, Josh
        Triplett, Kay Sievers, Lennart Poettering, Marc-Antoine
        Perennou, Michael Marineau, Michael Olbrich, Miklos Vajna,
        Patrik Flykt, poma, Sebastian Thorarensen, Thomas Bächler,
        Thomas Hindoe Paaboel Andersen, Tomasz Torcz, Tom Gundersen,
        Umut Tezduyar Lindskog, Wieland Hoffmann, Zbigniew
        Jędrzejewski-Szmek

        -- Berlin, 2014-03-25

CHANGES WITH 211:

        * A new unit file setting RestrictAddressFamilies= has been
          added to restrict which socket address families unit
          processes gain access to. This takes address family names
          like "AF_INET" or "AF_UNIX", and is useful to minimize the
          attack surface of services via exotic protocol stacks. This
          is built on seccomp system call filters.

        * Two new unit file settings RuntimeDirectory= and
          RuntimeDirectoryMode= have been added that may be used to
          manage a per-daemon runtime directories below /run. This is
          an alternative for setting up directory permissions with
          tmpfiles snippets, and has the advantage that the runtime
          directory's lifetime is bound to the daemon runtime and that
          the daemon starts up with an empty directory each time. This
          is particularly useful when writing services that drop
          privileges using the User= or Group= setting.

        * The DeviceAllow= unit setting now supports globbing for
          matching against device group names.

        * The systemd configuration file system.conf gained new
          settings DefaultCPUAccounting=, DefaultBlockIOAccounting=,
          DefaultMemoryAccounting= to globally turn on/off accounting
          for specific resources (cgroups) for all units. These
          settings may still be overridden individually in each unit
          though.

        * systemd-gpt-auto-generator is now able to discover /srv and
          root partitions in addition to /home and swap partitions. It
          also supports LUKS-encrypted partitions now. With this in
          place, automatic discovery of partitions to mount following
          the Discoverable Partitions Specification
          (http://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec)
          is now a lot more complete. This allows booting without
          /etc/fstab and without root= on the kernel command line on
          systems prepared appropriately.

        * systemd-nspawn gained a new --image= switch which allows
          booting up disk images and Linux installations on any block
          device that follow the Discoverable Partitions Specification
          (see above). This means that installations made with
          appropriately updated installers may now be started and
          deployed using container managers, completely
          unmodified. (We hope that libvirt-lxc will add support for
          this feature soon, too.)

        * systemd-nspawn gained a new --network-macvlan= setting to
          set up a private macvlan interface for the
          container. Similar, systemd-networkd gained a new
          Kind=macvlan setting in .netdev files.

        * systemd-networkd now supports configuring local addresses
          using IPv4LL.

        * A new tool systemd-network-wait-online has been added to
          synchronously wait for network connectivity using
          systemd-networkd.

        * The sd-bus.h bus API gained a new sd_bus_track object for
          tracking the life-cycle of bus peers. Note that sd-bus.h is
          still not a public API though (unless you specify
          --enable-kdbus on the configure command line, which however
          voids your warranty and you get no API stability guarantee).

        * The $XDG_RUNTIME_DIR runtime directories for each user are
          now individual tmpfs instances, which has the benefit of
          introducing separate pools for each user, with individual
          size limits, and thus making sure that unprivileged clients
          can no longer negatively impact the system or other users by
          filling up their $XDG_RUNTIME_DIR. A new logind.conf setting
          RuntimeDirectorySize= has been introduced that allows
          controlling the default size limit for all users. It
          defaults to 10% of the available physical memory. This is no
          replacement for quotas on tmpfs though (which the kernel
          still does not support), as /dev/shm and /tmp are still
          shared resources used by both the system and unprivileged
          users.

        * logind will now automatically turn off automatic suspending
          on laptop lid close when more than one display is
          connected. This was previously expected to be implemented
          individually in desktop environments (such as GNOME),
          however has been added to logind now, in order to fix a
          boot-time race where a desktop environment might not have
          been started yet and thus not been able to take an inhibitor
          lock at the time where logind already suspends the system
          due to a closed lid.

        * logind will now wait at least 30s after each system
          suspend/resume cycle, and 3min after system boot before
          suspending the system due to a closed laptop lid. This
          should give USB docking stations and similar enough time to
          be probed and configured after system resume and boot in
          order to then act as suspend blocker.

        * systemd-run gained a new --property= setting which allows
          initialization of resource control properties (and others)
          for the created scope or service unit. Example: "systemd-run
          --property=BlockIOWeight=10 updatedb" may be used to run
          updatedb at a low block IO scheduling weight.

        * systemd-run's --uid=, --gid=, --setenv=, --setenv= switches
          now also work in --scope mode.

        * When systemd is compiled with kdbus support, basic support
          for enforced policies is now in place. (Note that enabling
          kdbus still voids your warranty and no API compatibility
          promises are made.)

        Contributions from: Andrey Borzenkov, Ansgar Burchardt, Armin
        K., Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
        Harald Hoyer, Henrik Grindal Bakken, Jasper St. Pierre, Kay
        Sievers, Kieran Clancy, Lennart Poettering, Lukas Nykryn,
        Mantas Mikulėnas, Marcel Holtmann, Mark Oteiza, Martin Pitt,
        Mike Gilbert, Peter Rajnoha, poma, Samuli Suominen, Stef
        Walter, Susant Sahani, Tero Roponen, Thomas Andersen, Thomas
        Bächler, Thomas Hindoe Paaboel Andersen, Tomasz Torcz, Tom
        Gundersen, Umut Tezduyar Lindskog, Uoti Urpala, Zachary Cook,
        Zbigniew Jędrzejewski-Szmek

        -- Berlin, 2014-03-12

CHANGES WITH 210:

        * systemd will now relabel /dev after loading the SMACK policy
          according to SMACK rules.

        * A new unit file option AppArmorProfile= has been added to
          set the AppArmor profile for the processes of a unit.

        * A new condition check ConditionArchitecture= has been added
          to conditionalize units based on the system architecture, as
          reported by uname()'s "machine" field.

        * systemd-networkd now supports matching on the system
          virtualization, architecture, kernel command line, host name
          and machine ID.

        * logind is now a lot more aggressive when suspending the
          machine due to a closed laptop lid. Instead of acting only
          on the lid close action, it will continuously watch the lid
          status and act on it. This is useful for laptops where the
          power button is on the outside of the chassis so that it can
          be reached without opening the lid (such as the Lenovo
          Yoga). On those machines, logind will now immediately
          re-suspend the machine if the power button has been
          accidentally pressed while the laptop was suspended and in a
          backpack or similar.

        * logind will now watch SW_DOCK switches and inhibit reaction
          to the lid switch if it is pressed. This means that logind
          will not suspend the machine anymore if the lid is closed
          and the system is docked, if the laptop supports SW_DOCK
          notifications via the input layer. Note that ACPI docking
          stations do not generate this currently. Also note that this
          logic is usually not fully sufficient and Desktop
          Environments should take a lid switch inhibitor lock when an
          external display is connected, as systemd will not watch
          this on its own.

        * nspawn will now make use of the devices cgroup controller by
          default, and only permit creation of and access to the usual
          API device nodes like /dev/null or /dev/random, as well as
          access to (but not creation of) the pty devices.

        * We will now ship a default .network file for
          systemd-networkd that automatically configures DHCP for
          network interfaces created by nspawn's --network-veth or
          --network-bridge= switches.

        * systemd will now understand the usual M, K, G, T suffixes
          according to SI conventions (i.e. to the base 1000) when
          referring to throughput and hardware metrics. It will stay
          with IEC conventions (i.e. to the base 1024) for software
          metrics, according to what is customary according to
          Wikipedia. We explicitly document which base applies for
          each configuration option.

        * The DeviceAllow= setting in unit files now supports a syntax
          to whitelist an entire group of devices node majors at once,
          based on the /proc/devices listing. For example, with the
          string "char-pts", it is now possible to whitelist all
          current and future pseudo-TTYs at once.

        * sd-event learned a new "post" event source. Event sources of
          this type are triggered by the dispatching of any event
          source of a type that is not "post". This is useful for
          implementing clean-up and check event sources that are
          triggered by other work being done in the program.

        * systemd-networkd is no longer statically enabled, but uses
          the usual [Install] sections so that it can be
          enabled/disabled using systemctl. It still is enabled by
          default however.

        * When creating a veth interface pair with systemd-nspawn, the
          host side will now be prefixed with "vb-" if
          --network-bridge= is used, and with "ve-" if --network-veth
          is used. This way, it is easy to distinguish these cases on
          the host, for example to apply different configuration to
          them with systemd-networkd.

        * The compatibility libraries for libsystemd-journal.so,
          libsystem-id128.so, libsystemd-login.so and
          libsystemd-daemon.so do not make use of IFUNC
          anymore. Instead, we now build libsystemd.so multiple times
          under these alternative names. This means that the footprint
          is drastically increased, but given that these are
          transitional compatibility libraries, this should not matter
          much. This change has been made necessary to support the ARM
          platform for these compatibility libraries, as the ARM
          toolchain is not really at the same level as the toolchain
          for other architectures like x86 and does not support
          IFUNC. Please make sure to use --enable-compat-libs only
          during a transitional period!

        Contributions from: Andreas Fuchs, Armin K., Colin Walters,
        Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
        Holger Schurig, Jason A. Donenfeld, Jason St. John, Jasper
        St. Pierre, Kay Sievers, Lennart Poettering, Łukasz Stelmach,
        Marcel Holtmann, Michael Scherer, Michal Sekletar, Mike
        Gilbert, Samuli Suominen, Thomas Bächler, Thomas Hindoe
        Paaboel Andersen, Tom Gundersen, Umut Tezduyar Lindskog,
        Zbigniew Jędrzejewski-Szmek

        -- Berlin, 2014-02-24

CHANGES WITH 209:

        * A new component "systemd-networkd" has been added that can
          be used to configure local network interfaces statically or
          via DHCP. It is capable of bringing up bridges, VLANs, and
          bonding. Currently, no hook-ups for interactive network
          configuration are provided. Use this for your initrd,
          container, embedded, or server setup if you need a simple,
          yet powerful, network configuration solution. This
          configuration subsystem is quite nifty, as it allows wildcard
          hotplug matching in interfaces. For example, with a single
          configuration snippet, you can configure that all Ethernet
          interfaces showing up are automatically added to a bridge,
          or similar. It supports link-sensing and more.

        * A new tool "systemd-socket-proxyd" has been added which can
          act as a bidirectional proxy for TCP sockets. This is
          useful for adding socket activation support to services that
          do not actually support socket activation, including virtual
          machines and the like.

        * Add a new tool to save/restore rfkill state on
          shutdown/boot.

        * Save/restore state of keyboard backlights in addition to
          display backlights on shutdown/boot.

        * udev learned a new SECLABEL{} construct to label device
          nodes with a specific security label when they appear. For
          now, only SECLABEL{selinux} is supported, but the syntax is
          prepared for additional security frameworks.

        * udev gained a new scheme to configure link-level attributes
          from files in /etc/systemd/network/*.link. These files can
          match against MAC address, device path, driver name and type,
          and will apply attributes like the naming policy, link speed,
          MTU, duplex settings, Wake-on-LAN settings, MAC address, MAC
          address assignment policy (randomized, ...).

        * The configuration of network interface naming rules for
          "permanent interface names" has changed: a new NamePolicy=
          setting in the [Link] section of .link files determines the
          priority of possible naming schemes (onboard, slot, mac,
          path). The default value of this setting is determined by
          /usr/lib/net/links/99-default.link. Old
          80-net-name-slot.rules udev configuration file has been
          removed, so local configuration overriding this file should
          be adapated to override 99-default.link instead.

        * When the User= switch is used in a unit file, also
          initialize $SHELL= based on the user database entry.

        * systemd no longer depends on libdbus. All communication is
          now done with sd-bus, systemd's low-level bus library
          implementation.

        * kdbus support has been added to PID 1 itself. When kdbus is
          enabled, this causes PID 1 to set up the system bus and
          enable support for a new ".busname" unit type that
          encapsulates bus name activation on kdbus. It works a little
          bit like ".socket" units, except for bus names. A new
          generator has been added that converts classic dbus1 service
          activation files automatically into native systemd .busname
          and .service units.

        * sd-bus: add a light-weight vtable implementation that allows
          defining objects on the bus with a simple static const
          vtable array of its methods, signals and properties.

        * systemd will not generate or install static dbus
          introspection data anymore to /usr/share/dbus-1/interfaces,
          as the precise format of these files is unclear, and
          nothing makes use of it.

        * A proxy daemon is now provided to proxy clients connecting
          via classic D-Bus AF_UNIX sockets to kdbus, to provide full
          compatibility with classic D-Bus.

        * A bus driver implementation has been added that supports the
          classic D-Bus bus driver calls on kdbus, also for
          compatibility purposes.

        * A new API "sd-event.h" has been added that implements a
          minimal event loop API built around epoll. It provides a
          couple of features that direct epoll usage is lacking:
          prioritization of events, scales to large numbers of timer
          events, per-event timer slack (accuracy), system-wide
          coalescing of timer events, exit handlers, watchdog
          supervision support using systemd's sd_notify() API, child
          process handling.

        * A new API "sd-rntl.h" has been added that provides an API
          around the route netlink interface of the kernel, similar in
          style to "sd-bus.h".

        * A new API "sd-dhcp-client.h" has been added that provides a
          small DHCPv4 client-side implementation. This is used by
          "systemd-networkd".

        * There is a new kernel command line option
          "systemd.restore_state=0|1". When set to "0", none of the
          systemd tools will restore saved runtime state to hardware
          devices. More specifically, the rfkill and backlight states
          are not restored.

        * The FsckPassNo= compatibility option in mount/service units
          has been removed. The fstab generator will now add the
          necessary dependencies automatically, and does not require
          PID1's support for that anymore.

        * journalctl gained a new switch, --list-boots, that lists
          recent boots with their times and boot IDs.

        * The various tools like systemctl, loginctl, timedatectl,
          busctl, systemd-run, ... have gained a new switch "-M" to
          connect to a specific, local OS container (as direct
          connection, without requiring SSH). This works on any
          container that is registered with machined, such as those
          created by libvirt-lxc or nspawn.

        * systemd-run and systemd-analyze also gained support for "-H"
          to connect to remote hosts via SSH. This is particularly
          useful for systemd-run because it enables queuing of jobs
          onto remote systems.

        * machinectl gained a new command "login" to open a getty
          login in any local container. This works with any container
          that is registered with machined (such as those created by
          libvirt-lxc or nspawn), and which runs systemd inside.

        * machinectl gained a new "reboot" command that may be used to
          trigger a reboot on a specific container that is registered
          with machined. This works on any container that runs an init
          system of some kind.

        * systemctl gained a new "list-timers" command to print a nice
          listing of installed timer units with the times they elapse
          next.

        * Alternative reboot() parameters may now be specified on the
          "systemctl reboot" command line and are passed to the
          reboot() system call.

        * systemctl gained a new --job-mode= switch to configure the
          mode to queue a job with. This is a more generic version of
          --fail, --irreversible, and --ignore-dependencies, which are
          still available but not advertised anymore.

        * /etc/systemd/system.conf gained new settings to configure
          various default timeouts of units, as well as the default
          start limit interval and burst. These may still be overridden
          within each Unit.

        * PID1 will now export on the bus profile data of the security
          policy upload process (such as the SELinux policy upload to
          the kernel).

        * journald: when forwarding logs to the console, include
          timestamps (following the setting in
          /sys/module/printk/parameters/time).

        * OnCalendar= in timer units now understands the special
          strings "yearly" and "annually". (Both are equivalent)

        * The accuracy of timer units is now configurable with the new
          AccuracySec= setting. It defaults to 1min.

        * A new dependency type JoinsNamespaceOf= has been added that
          allows running two services within the same /tmp and network
          namespace, if PrivateNetwork= or PrivateTmp= are used.

        * A new command "cat" has been added to systemctl. It outputs
          the original unit file of a unit, and concatenates the
          contents of additional "drop-in" unit file snippets, so that
          the full configuration is shown.

        * systemctl now supports globbing on the various "list-xyz"
          commands, like "list-units" or "list-sockets", as well as on
          those commands which take multiple unit names.

        * journalctl's --unit= switch gained support for globbing.

        * All systemd daemons now make use of the watchdog logic so
          that systemd automatically notices when they hang.

        * If the $container_ttys environment variable is set,
          getty-generator will automatically spawn a getty for each
          listed tty. This is useful for container managers to request
          login gettys to be spawned on as many ttys as needed.

        * %h, %s, %U specifier support is not available anymore when
          used in unit files for PID 1. This is because NSS calls are
          not safe from PID 1. They stay available for --user
          instances of systemd, and as special case for the root user.

        * loginctl gained a new "--no-legend" switch to turn off output
          of the legend text.

        * The "sd-login.h" API gained three new calls:
          sd_session_is_remote(), sd_session_get_remote_user(),
          sd_session_get_remote_host() to query information about
          remote sessions.

        * The udev hardware database now also carries vendor/product
          information of SDIO devices.

        * The "sd-daemon.h" API gained a new sd_watchdog_enabled() to
          determine whether watchdog notifications are requested by
          the system manager.

        * Socket-activated per-connection services now include a
          short description of the connection parameters in the
          description.

        * tmpfiles gained a new "--boot" option. When this is not used,
          only lines where the command character is not suffixed with
          "!" are executed. When this option is specified, those
          options are executed too. This partitions tmpfiles
          directives into those that can be safely executed at any
          time, and those which should be run only at boot (for
          example, a line that creates /run/nologin).

        * A new API "sd-resolve.h" has been added which provides a simple
          asynchronous wrapper around glibc NSS host name resolution
          calls, such as getaddrinfo(). In contrast to glibc's
          getaddrinfo_a(), it does not use signals. In contrast to most
          other asynchronous name resolution libraries, this one does
          not reimplement DNS, but reuses NSS, so that alternate
          host name resolution systems continue to work, such as mDNS,
          LDAP, etc. This API is based on libasyncns, but it has been
          cleaned up for inclusion in systemd.

        * The APIs "sd-journal.h", "sd-login.h", "sd-id128.h",
          "sd-daemon.h" are no longer found in individual libraries
          libsystemd-journal.so, libsystemd-login.so,
          libsystemd-id128.so, libsystemd-daemon.so. Instead, we have
          merged them into a single library, libsystemd.so, which
          provides all symbols. The reason for this is cyclic
          dependencies, as these libraries tend to use each other's
          symbols. So far, we have managed to workaround that by linking
          a copy of a good part of our code into each of these
          libraries again and again, which, however, makes certain
          things hard to do, like sharing static variables. Also, it
          substantially increases footprint. With this change, there
          is only one library for the basic APIs systemd
          provides. Also, "sd-bus.h", "sd-memfd.h", "sd-event.h",
          "sd-rtnl.h", "sd-resolve.h", "sd-utf8.h" are found in this
          library as well, however are subject to the --enable-kdbus
          switch (see below). Note that "sd-dhcp-client.h" is not part
          of this library (this is because it only consumes, never
          provides, services of/to other APIs). To make the transition
          easy from the separate libraries to the unified one, we
          provide the --enable-compat-libs compile-time switch which
          will generate stub libraries that are compatible with the
          old ones but redirect all calls to the new one.

        * All of the kdbus logic and the new APIs "sd-bus.h",
          "sd-memfd.h", "sd-event.h", "sd-rtnl.h", "sd-resolve.h",
          and "sd-utf8.h" are compile-time optional via the
          "--enable-kdbus" switch, and they are not compiled in by
          default. To make use of kdbus, you have to explicitly enable
          the switch. Note however, that neither the kernel nor the
          userspace API for all of this is considered stable yet. We
          want to maintain the freedom to still change the APIs for
          now. By specifying this build-time switch, you acknowledge
          that you are aware of the instability of the current
          APIs.

        * Also, note that while kdbus is pretty much complete,
          it lacks one thing: proper policy support. This means you
          can build a fully working system with all features; however,
          it will be highly insecure. Policy support will be added in
          one of the next releases, at the same time that we will
          declare the APIs stable.

        * When the kernel command-line argument "kdbus" is specified,
          systemd will automatically load the kdbus.ko kernel module. At
          this stage of development, it is only useful for testing kdbus
          and should not be used in production. Note: if "--enable-kdbus"
          is specified, and the kdbus.ko kernel module is available, and
          "kdbus" is added to the kernel command line, the entire system
          runs with kdbus instead of dbus-daemon, with the above mentioned
          problem of missing the system policy enforcement. Also a future
          version of kdbus.ko or a newer systemd will not be compatible with
          each other, and will unlikely be able to boot the machine if only
          one of them is updated.

        * systemctl gained a new "import-environment" command which
          uploads the caller's environment (or parts thereof) into the
          service manager so that it is inherited by services started
          by the manager. This is useful to upload variables like
          $DISPLAY into the user service manager.

        * A new PrivateDevices= switch has been added to service units
          which allows running a service with a namespaced /dev
          directory that does not contain any device nodes for
          physical devices. More specifically, it only includes devices
          such as /dev/null, /dev/urandom, and /dev/zero which are API
          entry points.

        * logind has been extended to support behaviour like VT
          switching on seats that do not support a VT. This makes
          multi-session available on seats that are not the first seat
          (seat0), and on systems where kernel support for VTs has
          been disabled at compile-time.

        * If a process holds a delay lock for system sleep or shutdown
          and fails to release it in time, we will now log its
          identity. This makes it easier to identify processes that
          cause slow suspends or power-offs.

        * When parsing /etc/crypttab, support for a new key-slot=
          option as supported by Debian is added. It allows indicating
          which LUKS slot to use on disk, speeding up key loading.

        * The sd_journald_sendv() API call has been checked and
          officially declared to be async-signal-safe so that it may
          be invoked from signal handlers for logging purposes.

        * Boot-time status output is now enabled automatically after a
          short timeout if boot does not progress, in order to give
          the user an indication what she or he is waiting for.

        * The boot-time output has been improved to show how much time
          remains until jobs expire.

        * The KillMode= switch in service units gained a new possible
          value "mixed". If set, and the unit is shut down, then the
          initial SIGTERM signal is sent only to the main daemon
          process, while the following SIGKILL signal is sent to
          all remaining processes of the service.

        * When a scope unit is registered, a new property "Controller"
          may be set. If set to a valid bus name, systemd will send a
          RequestStop() signal to this name when it would like to shut
          down the scope. This may be used to hook manager logic into
          the shutdown logic of scope units. Also, scope units may now
          be put in a special "abandoned" state, in which case the
          manager process which created them takes no further
          responsibilities for it.

        * When reading unit files, systemd will now verify
          the access mode of these files, and warn about certain
          suspicious combinations. This has been added to make it
          easier to track down packaging bugs where unit files are
          marked executable or world-writable.

        * systemd-nspawn gained a new "--setenv=" switch to set
          container-wide environment variables. The similar option in
          systemd-activate was renamed from "--environment=" to
          "--setenv=" for consistency.

        * systemd-nspawn has been updated to create a new kdbus domain
          for each container that is invoked, thus allowing each
          container to have its own set of system and user buses,
          independent of the host.

        * systemd-nspawn gained a new --drop-capability= switch to run
          the container with less capabilities than the default. Both
          --drop-capability= and --capability= now take the special
          string "all" for dropping or keeping all capabilities.

        * systemd-nspawn gained new switches for executing containers
          with specific SELinux labels set.

        * systemd-nspawn gained a new --quiet switch to not generate
          any additional output but the container's own console
          output.

        * systemd-nspawn gained a new --share-system switch to run a
          container without PID namespacing enabled.

        * systemd-nspawn gained a new --register= switch to control
          whether the container is registered with systemd-machined or
          not. This is useful for containers that do not run full
          OS images, but only specific apps.

        * systemd-nspawn gained a new --keep-unit which may be used
          when invoked as the only program from a service unit, and
          results in registration of the unit service itself in
          systemd-machined, instead of a newly opened scope unit.

        * systemd-nspawn gained a new --network-interface= switch for
          moving arbitrary interfaces to the container. The new
          --network-veth switch creates a virtual Ethernet connection
          between host and container. The new --network-bridge=
          switch then allows assigning the host side of this virtual
          Ethernet connection to a bridge device.

        * systemd-nspawn gained a new --personality= switch for
          setting the kernel personality for the container. This is
          useful when running a 32-bit container on a 64-bit host. A
          similar option Personality= is now also available for service
          units to use.

        * logind will now also track a "Desktop" identifier for each
          session which encodes the desktop environment of it. This is
          useful for desktop environments that want to identify
          multiple running sessions of itself easily.

        * A new SELinuxContext= setting for service units has been
          added that allows setting a specific SELinux execution
          context for a service.

        * Most systemd client tools will now honour $SYSTEMD_LESS for
          settings of the "less" pager. By default, these tools will
          override $LESS to allow certain operations to work, such as
          jump-to-the-end. With $SYSTEMD_LESS, it is possible to
          influence this logic.

        * systemd's "seccomp" hook-up has been changed to make use of
          the libseccomp library instead of using its own
          implementation. This has benefits for portability among
          other things.

        * For usage together with SystemCallFilter=, a new
          SystemCallErrorNumber= setting has been introduced that
          allows configuration of a system error number to be returned
          on filtered system calls, instead of immediately killing the
          process. Also, SystemCallArchitectures= has been added to
          limit access to system calls of a particular architecture
          (in order to turn off support for unused secondary
          architectures). There is also a global
          SystemCallArchitectures= setting in system.conf now to turn
          off support for non-native system calls system-wide.

        * systemd requires a kernel with a working name_to_handle_at(),
          please see the kernel config requirements in the README file.

        Contributions from: Adam Williamson, Alex Jia, Anatol Pomozov,
        Ansgar Burchardt, AppleBloom, Auke Kok, Bastien Nocera,
        Chengwei Yang, Christian Seiler, Colin Guthrie, Colin Walters,
        Cristian Rodríguez, Daniel Buch, Daniele Medri, Daniel J
        Walsh, Daniel Mack, Dan McGee, Dave Reisner, David Coppa,
        David Herrmann, David Strauss, Djalal Harouni, Dmitry Pisklov,
        Elia Pinto, Florian Weimer, George McCollister, Goffredo
        Baroncelli, Greg Kroah-Hartman, Hendrik Brueckner, Igor
        Zhbanov, Jan Engelhardt, Jan Janssen, Jason A. Donenfeld,
        Jason St. John, Jasper St. Pierre, Jóhann B. Guðmundsson, Jose
        Ignacio Naranjo, Karel Zak, Kay Sievers, Kristian Høgsberg,
        Lennart Poettering, Lubomir Rintel, Lukas Nykryn, Lukasz
        Skalski, Łukasz Stelmach, Luke Shumaker, Mantas Mikulėnas,
        Marc-Antoine Perennou, Marcel Holtmann, Marcos Felipe Rasia de
        Mello, Marko Myllynen, Martin Pitt, Matthew Monaco, Michael
        Marineau, Michael Scherer, Michał Górny, Michal Sekletar,
        Michele Curti, Oleksii Shevchuk, Olivier Brunel, Patrik Flykt,
        Pavel Holica, Raudi, Richard Marko, Ronny Chevalier, Sébastien
        Luttringer, Sergey Ptashnick, Shawn Landden, Simon Peeters,
        Stefan Beller, Susant Sahani, Sylvain Plantefeve, Sylvia Else,
        Tero Roponen, Thomas Bächler, Thomas Hindoe Paaboel Andersen,
        Tom Gundersen, Umut Tezduyar Lindskog, Unai Uribarri, Václav
        Pavlín, Vincent Batts, WaLyong Cho, William Giokas, Yang
        Zhiyong, Yin Kangkai, Yuxuan Shui, Zbigniew Jędrzejewski-Szmek

        -- Berlin, 2014-02-20

CHANGES WITH 208:

        * logind has gained support for facilitating privileged input
          and drm device access for unprivileged clients. This work is
          useful to allow Wayland display servers (and similar
          programs, such as kmscon) to run under the user's ID and
          access input and drm devices which are normally
          protected. When this is used (and the kernel is new enough)
          logind will "mute" IO on the file descriptors passed to
          Wayland as long as it is in the background and "unmute" it
          if it returns into the foreground. This allows secure
          session switching without allowing background sessions to
          eavesdrop on input and display data. This also introduces
          session switching support if VT support is turned off in the
          kernel, and on seats that are not seat0.

        * A new kernel command line option luks.options= is understood
          now which allows specifiying LUKS options for usage for LUKS
          encrypted partitions specified with luks.uuid=.

        * tmpfiles.d(5) snippets may now use specifier expansion in
          path names. More specifically %m, %b, %H, %v, are now
          replaced by the local machine id, boot id, hostname, and
          kernel version number.

        * A new tmpfiles.d(5) command "m" has been introduced which
          may be used to change the owner/group/access mode of a file
          or directory if it exists, but do nothing if it does not.

        * This release removes high-level support for the
          MemorySoftLimit= cgroup setting. The underlying kernel
          cgroup attribute memory.soft_limit= is currently badly
          designed and likely to be removed from the kernel API in its
          current form, hence we should not expose it for now.

        * The memory.use_hierarchy cgroup attribute is now enabled for
          all cgroups systemd creates in the memory cgroup
          hierarchy. This option is likely to be come the built-in
          default in the kernel anyway, and the non-hierarchial mode
          never made much sense in the intrinsically hierarchial
          cgroup system.

        * A new field _SYSTEMD_SLICE= is logged along with all journal
          messages containing the slice a message was generated
          from. This is useful to allow easy per-customer filtering of
          logs among other things.

        * systemd-journald will no longer adjust the group of journal
          files it creates to the "systemd-journal" group. Instead we
          rely on the journal directory to be owned by the
          "systemd-journal" group, and its setgid bit set, so that the
          kernel file system layer will automatically enforce that
          journal files inherit this group assignment. The reason for
          this change is that we cannot allow NSS look-ups from
          journald which would be necessary to resolve
          "systemd-journal" to a numeric GID, because this might
          create deadlocks if NSS involves synchronous queries to
          other daemons (such as nscd, or sssd) which in turn are
          logging clients of journald and might block on it, which
          would then dead lock. A tmpfiles.d(5) snippet included in
          systemd will make sure the setgid bit and group are
          properly set on the journal directory if it exists on every
          boot. However, we recommend adjusting it manually after
          upgrades too (or from RPM scriptlets), so that the change is
          not delayed until next reboot.

        * Backlight and random seed files in /var/lib/ have moved into
          the /var/lib/systemd/ directory, in order to centralize all
          systemd generated files in one directory.

        * Boot time performance measurements (as displayed by
          "systemd-analyze" for example) will now read ACPI 5.0 FPDT
          performance information if that's available to determine how
          much time BIOS and boot loader initialization required. With
          a sufficiently new BIOS you hence no longer need to boot
          with Gummiboot to get access to such information.

        Contributions from: Andrey Borzenkov, Chen Jie, Colin Walters,
        Cristian Rodríguez, Dave Reisner, David Herrmann, David
        Mackey, David Strauss, Eelco Dolstra, Evan Callicoat, Gao
        feng, Harald Hoyer, Jimmie Tauriainen, Kay Sievers, Lennart
        Poettering, Lukas Nykryn, Mantas Mikulėnas, Martin Pitt,
        Michael Scherer, Michał Górny, Mike Gilbert, Patrick McCarty,
        Sebastian Ott, Tom Gundersen, Zbigniew Jędrzejewski-Szmek

        -- Berlin, 2013-10-02

CHANGES WITH 207:

        * The Restart= option for services now understands a new
          on-watchdog setting, which will restart the service
          automatically if the service stops sending out watchdog keep
          alive messages (as configured with WatchdogSec=).

        * The getty generator (which is responsible for bringing up a
          getty on configured serial consoles) will no longer only
          start a getty on the primary kernel console but on all
          others, too. This makes the order in which console= is
          specified on the kernel command line less important.

        * libsystemd-logind gained a new sd_session_get_vt() call to
          retrieve the VT number of a session.

        * If the option "tries=0" is set for an entry of /etc/crypttab
          its passphrase is queried indefinitely instead of any
          maximum number of tries.

        * If a service with a configure PID file terminates its PID
          file will now be removed automatically if it still exists
          afterwards. This should put an end to stale PID files.

        * systemd-run will now also take relative binary path names
          for execution and no longer insists on absolute paths.

        * InaccessibleDirectories= and ReadOnlyDirectories= now take
          paths that are optionally prefixed with "-" to indicate that
          it should not be considered a failure if they do not exist.

        * journalctl -o (and similar commands) now understands a new
          output mode "short-precise", it is similar to "short" but
          shows timestamps with usec accuracy.

        * The option "discard" (as known from Debian) is now
          synonymous to "allow-discards" in /etc/crypttab. In fact,
          "discard" is preferred now (since it is easier to remember
          and type).

        * Some licensing clean-ups were made, so that more code is now
          LGPL-2.1 licensed than before.

        * A minimal tool to save/restore the display backlight
          brightness across reboots has been added. It will store the
          backlight setting as late as possible at shutdown, and
          restore it as early as possible during reboot.

        * A logic to automatically discover and enable home and swap
          partitions on GPT disks has been added. With this in place
          /etc/fstab becomes optional for many setups as systemd can
          discover certain partitions located on the root disk
          automatically. Home partitions are recognized under their
          GPT type ID 933ac7e12eb44f13b8440e14e2aef915. Swap
          partitions are recognized under their GPT type ID
          0657fd6da4ab43c484e50933c84b4f4f.

        * systemd will no longer pass any environment from the kernel
          or initrd to system services. If you want to set an
          environment for all services, do so via the kernel command
          line systemd.setenv= assignment.

        * The systemd-sysctl tool no longer natively reads the file
          /etc/sysctl.conf. If desired, the file should be symlinked
          from /etc/sysctl.d/99-sysctl.conf. Apart from providing
          legacy support by a symlink rather than built-in code, it
          also makes the otherwise hidden order of application of the
          different files visible. (Note that this partly reverts to a
          pre-198 application order of sysctl knobs!)

        * The "systemctl set-log-level" and "systemctl dump" commands
          have been moved to systemd-analyze.

        * systemd-run learned the new --remain-after-exit switch,
          which causes the scope unit not to be cleaned up
          automatically after the process terminated.

        * tmpfiles learned a new --exclude-prefix= switch to exclude
          certain paths from operation.

        * journald will now automatically flush all messages to disk
          as soon as a message of the log priorities CRIT, ALERT or
          EMERG is received.

        Contributions from: Andrew Cook, Brandon Philips, Christian
        Hesse, Christoph Junghans, Colin Walters, Daniel Schaal,
        Daniel Wallace, Dave Reisner, David Herrmann, Gao feng, George
        McCollister, Giovanni Campagna, Hannes Reinecke, Harald Hoyer,
        Herczeg Zsolt, Holger Hans Peter Freyther, Jan Engelhardt,
        Jesper Larsen, Kay Sievers, Khem Raj, Lennart Poettering,
        Lukas Nykryn, Maciej Wereski, Mantas Mikulėnas, Marcel
        Holtmann, Martin Pitt, Michael Biebl, Michael Marineau,
        Michael Scherer, Michael Stapelberg, Michal Sekletar, Michał
        Górny, Olivier Brunel, Ondrej Balaz, Ronny Chevalier, Shawn
        Landden, Steven Hiscocks, Thomas Bächler, Thomas Hindoe
        Paaboel Andersen, Tom Gundersen, Umut Tezduyar, WANG Chao,
        William Giokas, Zbigniew Jędrzejewski-Szmek

        -- Berlin, 2013-09-13

CHANGES WITH 206:

        * The documentation has been updated to cover the various new
          concepts introduced with 205.

        * Unit files now understand the new %v specifier which
          resolves to the kernel version string as returned by "uname
          -r".

        * systemctl now supports filtering the unit list output by
          load state, active state and sub state, using the new
          --state= parameter.

        * "systemctl status" will now show the results of the
          condition checks (like ConditionPathExists= and similar) of
          the last start attempts of the unit. They are also logged to
          the journal.

        * "journalctl -b" may now be used to look for boot output of a
          specific boot. Try "journalctl -b -1" for the previous boot,
          but the syntax is substantially more powerful.

        * "journalctl --show-cursor" has been added which prints the
          cursor string the last shown log line. This may then be used
          with the new "journalctl --after-cursor=" switch to continue
          browsing logs from that point on.

        * "journalctl --force" may now be used to force regeneration
          of an FSS key.

        * Creation of "dead" device nodes has been moved from udev
          into kmod and tmpfiles. Previously, udev would read the kmod
          databases to pre-generate dead device nodes based on meta
          information contained in kernel modules, so that these would
          be auto-loaded on access rather then at boot. As this
          does not really have much to do with the exposing actual
          kernel devices to userspace this has always been slightly
          alien in the udev codebase. Following the new scheme kmod
          will now generate a runtime snippet for tmpfiles from the
          module meta information and it now is tmpfiles' job to the
          create the nodes. This also allows overriding access and
          other parameters for the nodes using the usual tmpfiles
          facilities. As side effect this allows us to remove the
          CAP_SYS_MKNOD capability bit from udevd entirely.

        * logind's device ACLs may now be applied to these "dead"
          devices nodes too, thus finally allowing managed access to
          devices such as /dev/snd/sequencer whithout loading the
          backing module right-away.

        * A new RPM macro has been added that may be used to apply
          tmpfiles configuration during package installation.

        * systemd-detect-virt and ConditionVirtualization= now can
          detect User-Mode-Linux machines (UML).

        * journald will now implicitly log the effective capabilities
          set of processes in the message metadata.

        * systemd-cryptsetup has gained support for TrueCrypt volumes.

        * The initrd interface has been simplified (more specifically,
          support for passing performance data via environment
          variables and fsck results via files in /run has been
          removed). These features were non-essential, and are
          nowadays available in a much nicer way by having systemd in
          the initrd serialize its state and have the hosts systemd
          deserialize it again.

        * The udev "keymap" data files and tools to apply keyboard
          specific mappings of scan to key codes, and force-release
          scan code lists have been entirely replaced by a udev
          "keyboard" builtin and a hwdb data file.

        * systemd will now honour the kernel's "quiet" command line
          argument also during late shutdown, resulting in a
          completely silent shutdown when used.

        * There's now an option to control the SO_REUSEPORT socket
          option in .socket units.

        * Instance units will now automatically get a per-template
          subslice of system.slice unless something else is explicitly
          configured. For example, instances of sshd@.service will now
          implicitly be placed in system-sshd.slice rather than
          system.slice as before.

        * Test coverage support may now be enabled at build time.

        Contributions from: Dave Reisner, Frederic Crozat, Harald
        Hoyer, Holger Hans Peter Freyther, Jan Engelhardt, Jan
        Janssen, Jason St. John, Jesper Larsen, Kay Sievers, Lennart
        Poettering, Lukas Nykryn, Maciej Wereski, Martin Pitt, Michael
        Olbrich, Ramkumar Ramachandra, Ross Lagerwall, Shawn Landden,
        Thomas H.P. Andersen, Tom Gundersen, Tomasz Torcz, William
        Giokas, Zbigniew Jędrzejewski-Szmek

        -- Berlin, 2013-07-23

CHANGES WITH 205:

        * Two new unit types have been introduced:

          Scope units are very similar to service units, however, are
          created out of pre-existing processes -- instead of PID 1
          forking off the processes. By using scope units it is
          possible for system services and applications to group their
          own child processes (worker processes) in a powerful way
          which then maybe used to organize them, or kill them
          together, or apply resource limits on them.

          Slice units may be used to partition system resources in an
          hierarchial fashion and then assign other units to them. By
          default there are now three slices: system.slice (for all
          system services), user.slice (for all user sessions),
          machine.slice (for VMs and containers).

          Slices and scopes have been introduced primarily in
          context of the work to move cgroup handling to a
          single-writer scheme, where only PID 1
          creates/removes/manages cgroups.

        * There's a new concept of "transient" units. In contrast to
          normal units these units are created via an API at runtime,
          not from configuration from disk. More specifically this
          means it is now possible to run arbitrary programs as
          independent services, with all execution parameters passed
          in via bus APIs rather than read from disk. Transient units
          make systemd substantially more dynamic then it ever was,
          and useful as a general batch manager.

        * logind has been updated to make use of scope and slice units
          for managing user sessions. As a user logs in he will get
          his own private slice unit, to which all sessions are added
          as scope units. We also added support for automatically
          adding an instance of user@.service for the user into the
          slice. Effectively logind will no longer create cgroup
          hierarchies on its own now, it will defer entirely to PID 1
          for this by means of scope, service and slice units. Since
          user sessions this way become entities managed by PID 1
          the output of "systemctl" is now a lot more comprehensive.

        * A new mini-daemon "systemd-machined" has been added which
          may be used by virtualization managers to register local
          VMs/containers. nspawn has been updated accordingly, and
          libvirt will be updated shortly. machined will collect a bit
          of meta information about the VMs/containers, and assign
          them their own scope unit (see above). The collected
          meta-data is then made available via the "machinectl" tool,
          and exposed in "ps" and similar tools. machined/machinectl
          is compile-time optional.

        * As discussed earlier, the low-level cgroup configuration
          options ControlGroup=, ControlGroupModify=,
          ControlGroupPersistent=, ControlGroupAttribute= have been
          removed. Please use high-level attribute settings instead as
          well as slice units.

        * A new bus call SetUnitProperties() has been added to alter
          various runtime parameters of a unit. This is primarily
          useful to alter cgroup parameters dynamically in a nice way,
          but will be extended later on to make more properties
          modifiable at runtime. systemctl gained a new set-properties
          command that wraps this call.

        * A new tool "systemd-run" has been added which can be used to
          run arbitrary command lines as transient services or scopes,
          while configuring a number of settings via the command
          line. This tool is currently very basic, however already
          very useful. We plan to extend this tool to even allow
          queuing of execution jobs with time triggers from the
          command line, similar in fashion to "at".

        * nspawn will now inform the user explicitly that kernels with
          audit enabled break containers, and suggest the user to turn
          off audit.

        * Support for detecting the IMA and AppArmor security
          frameworks with ConditionSecurity= has been added.

        * journalctl gained a new "-k" switch for showing only kernel
          messages, mimicking dmesg output; in addition to "--user"
          and "--system" switches for showing only user's own logs
          and system logs.

        * systemd-delta can now show information about drop-in
          snippets extending unit files.

        * libsystemd-bus has been substantially updated but is still
          not available as public API.

        * systemd will now look for the "debug" argument on the kernel
          command line and enable debug logging, similar to
          "systemd.log_level=debug" already did before.

        * "systemctl set-default", "systemctl get-default" has been
          added to configure the default.target symlink, which
          controls what to boot into by default.

        * "systemctl set-log-level" has been added as a convenient
          way to raise and lower systemd logging threshold.

        * "systemd-analyze plot" will now show the time the various
          generators needed for execution, as well as information
          about the unit file loading.

        * libsystemd-journal gained a new sd_journal_open_files() call
          for opening specific journal files. journactl also gained a
          new switch to expose this new functionality. Previously we
          only supported opening all files from a directory, or all
          files from the system, as opening individual files only is
          racy due to journal file rotation.

        * systemd gained the new DefaultEnvironment= setting in
          /etc/systemd/system.conf to set environment variables for
          all services.

        * If a privileged process logs a journal message with the
          OBJECT_PID= field set, then journald will automatically
          augment this with additional OBJECT_UID=, OBJECT_GID=,
          OBJECT_COMM=, OBJECT_EXE=, ... fields. This is useful if
          system services want to log events about specific client
          processes. journactl/systemctl has been updated to make use
          of this information if all log messages regarding a specific
          unit is requested.

        Contributions from: Auke Kok, Chengwei Yang, Colin Walters,
        Cristian Rodríguez, Daniel Albers, Daniel Wallace, Dave
        Reisner, David Coppa, David King, David Strauss, Eelco
        Dolstra, Gabriel de Perthuis, Harald Hoyer, Jan Alexander
        Steffens, Jan Engelhardt, Jan Janssen, Jason St. John, Johan
        Heikkilä, Karel Zak, Karol Lewandowski, Kay Sievers, Lennart
        Poettering, Lukas Nykryn, Mantas Mikulėnas, Marius Vollmer,
        Martin Pitt, Michael Biebl, Michael Olbrich, Michael Tremer,
        Michal Schmidt, Michał Bartoszkiewicz, Nirbheek Chauhan,
        Pierre Neidhardt, Ross Burton, Ross Lagerwall, Sean McGovern,
        Thomas Hindoe Paaboel Andersen, Tom Gundersen, Umut Tezduyar,
        Václav Pavlín, Zachary Cook, Zbigniew Jędrzejewski-Szmek,
        Łukasz Stelmach, 장동준

CHANGES WITH 204:

        * The Python bindings gained some minimal support for the APIs
          exposed by libsystemd-logind.

        * ConditionSecurity= gained support for detecting SMACK. Since
          this condition already supports SELinux and AppArmor we only
          miss IMA for this. Patches welcome!

        Contributions from: Karol Lewandowski, Lennart Poettering,
        Zbigniew Jędrzejewski-Szmek

CHANGES WITH 203:

        * systemd-nspawn will now create /etc/resolv.conf if
          necessary, before bind-mounting the host's file onto it.

        * systemd-nspawn will now store meta information about a
          container on the container's cgroup as extended attribute
          fields, including the root directory.

        * The cgroup hierarchy has been reworked in many ways. All
          objects any of the components systemd creates in the cgroup
          tree are now suffixed. More specifically, user sessions are
          now placed in cgroups suffixed with ".session", users in
          cgroups suffixed with ".user", and nspawn containers in
          cgroups suffixed with ".nspawn". Furthermore, all cgroup
          names are now escaped in a simple scheme to avoid collision
          of userspace object names with kernel filenames. This work
          is preparation for making these objects relocatable in the
          cgroup tree, in order to allow easy resource partitioning of
          these objects without causing naming conflicts.

        * systemctl list-dependencies gained the new switches
          --plain, --reverse, --after and --before.

        * systemd-inhibit now shows the process name of processes that
          have taken an inhibitor lock.

        * nss-myhostname will now also resolve "localhost"
          implicitly. This makes /etc/hosts an optional file and
          nicely handles that on IPv6 ::1 maps to both "localhost" and
          the local hostname.

        * libsystemd-logind.so gained a new call
          sd_get_machine_names() to enumerate running containers and
          VMs (currently only supported by very new libvirt and
          nspawn). sd_login_monitor can now be used to watch
          VMs/containers coming and going.

        * .include is not allowed recursively anymore, and only in
          unit files. Usually it is better to use drop-in snippets in
          .d/*.conf anyway, as introduced with systemd 198.

        * systemd-analyze gained a new "critical-chain" command that
          determines the slowest chain of units run during system
          boot-up. It is very useful for tracking down where
          optimizing boot time is the most beneficial.

        * systemd will no longer allow manipulating service paths in
          the name=systemd:/system cgroup tree using ControlGroup= in
          units. (But is still fine with it in all other dirs.)

        * There's a new systemd-nspawn@.service service file that may
          be used to easily run nspawn containers as system
          services. With the container's root directory in
          /var/lib/container/foobar it is now sufficient to run
          "systemctl start systemd-nspawn@foobar.service" to boot it.

        * systemd-cgls gained a new parameter "--machine" to list only
          the processes within a certain container.

        * ConditionSecurity= now can check for "apparmor". We still
          are lacking checks for SMACK and IMA for this condition
          check though. Patches welcome!

        * A new configuration file /etc/systemd/sleep.conf has been
          added that may be used to configure which kernel operation
          systemd is supposed to execute when "suspend", "hibernate"
          or "hybrid-sleep" is requested. This makes the new kernel
          "freeze" state accessible to the user.

        * ENV{SYSTEMD_WANTS} in udev rules will now implicitly escape
          the passed argument if applicable.

        Contributions from: Auke Kok, Colin Guthrie, Colin Walters,
        Cristian Rodríguez, Daniel Buch, Daniel Wallace, Dave Reisner,
        Evangelos Foutras, Greg Kroah-Hartman, Harald Hoyer, Josh
        Triplett, Kay Sievers, Lennart Poettering, Lukas Nykryn,
        MUNEDA Takahiro, Mantas Mikulėnas, Mirco Tischler, Nathaniel
        Chen, Nirbheek Chauhan, Ronny Chevalier, Ross Lagerwall, Tom
        Gundersen, Umut Tezduyar, Ville Skyttä, Zbigniew
        Jędrzejewski-Szmek

CHANGES WITH 202:

        * The output of 'systemctl list-jobs' got some polishing. The
          '--type=' argument may now be passed more than once. A new
          command 'systemctl list-sockets' has been added which shows
          a list of kernel sockets systemd is listening on with the
          socket units they belong to, plus the units these socket
          units activate.

        * The experimental libsystemd-bus library got substantial
          updates to work in conjunction with the (also experimental)
          kdbus kernel project. It works well enough to exchange
          messages with some sophistication. Note that kdbus is not
          ready yet, and the library is mostly an elaborate test case
          for now, and not installable.

        * systemd gained a new unit 'systemd-static-nodes.service'
          that generates static device nodes earlier during boot, and
          can run in conjunction with udev.

        * libsystemd-login gained a new call sd_pid_get_user_unit()
          to retrieve the user systemd unit a process is running
          in. This is useful for systems where systemd is used as
          session manager.

        * systemd-nspawn now places all containers in the new /machine
          top-level cgroup directory in the name=systemd
          hierarchy. libvirt will soon do the same, so that we get a
          uniform separation of /system, /user and /machine for system
          services, user processes and containers/virtual
          machines. This new cgroup hierarchy is also useful to stick
          stable names to specific container instances, which can be
          recognized later this way (this name may be controlled
          via systemd-nspawn's new -M switch). libsystemd-login also
          gained a new call sd_pid_get_machine_name() to retrieve the
          name of the container/VM a specific process belongs to.

        * bootchart can now store its data in the journal.

        * libsystemd-journal gained a new call
          sd_journal_add_conjunction() for AND expressions to the
          matching logic. This can be used to express more complex
          logical expressions.

        * journactl can now take multiple --unit= and --user-unit=
          switches.

        * The cryptsetup logic now understands the "luks.key=" kernel
          command line switch for specifying a file to read the
          decryption key from. Also, if a configured key file is not
          found the tool will now automatically fall back to prompting
          the user.

        * Python systemd.journal module was updated to wrap recently
          added functions from libsystemd-journal. The interface was
          changed to bring the low level interface in s.j._Reader
          closer to the C API, and the high level interface in
          s.j.Reader was updated to wrap and convert all data about
          an entry.

        Contributions from: Anatol Pomozov, Auke Kok, Harald Hoyer,
        Henrik Grindal Bakken, Josh Triplett, Kay Sievers, Lennart
        Poettering, Lukas Nykryn, Mantas Mikulėnas Marius Vollmer,
        Martin Jansa, Martin Pitt, Michael Biebl, Michal Schmidt,
        Mirco Tischler, Pali Rohar, Simon Peeters, Steven Hiscocks,
        Tom Gundersen, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 201:

        * journalctl --update-catalog now understands a new --root=
          option to operate on catalogs found in a different root
          directory.

        * During shutdown after systemd has terminated all running
          services a final killing loop kills all remaining left-over
          processes. We will now print the name of these processes
          when we send SIGKILL to them, since this usually indicates a
          problem.

        * If /etc/crypttab refers to password files stored on
          configured mount points automatic dependencies will now be
          generated to ensure the specific mount is established first
          before the key file is attempted to be read.

        * 'systemctl status' will now show information about the
          network sockets a socket unit is listening on.

        * 'systemctl status' will also shown information about any
          drop-in configuration file for units. (Drop-In configuration
          files in this context are files such as
          /etc/systemd/systemd/foobar.service.d/*.conf)

        * systemd-cgtop now optionally shows summed up CPU times of
          cgroups. Press '%' while running cgtop to switch between
          percentage and absolute mode. This is useful to determine
          which cgroups use up the most CPU time over the entire
          runtime of the system. systemd-cgtop has also been updated
          to be 'pipeable' for processing with further shell tools.

        * 'hostnamectl set-hostname' will now allow setting of FQDN
          hostnames.

        * The formatting and parsing of time span values has been
          changed. The parser now understands fractional expressions
          such as "5.5h". The formatter will now output fractional
          expressions for all time spans under 1min, i.e. "5.123456s"
          rather than "5s 123ms 456us". For time spans under 1s
          millisecond values are shown, for those under 1ms
          microsecond values are shown. This should greatly improve
          all time-related output of systemd.

        * libsystemd-login and libsystemd-journal gained new
          functions for querying the poll() events mask and poll()
          timeout value for integration into arbitrary event
          loops.

        * localectl gained the ability to list available X11 keymaps
          (models, layouts, variants, options).

        * 'systemd-analyze dot' gained the ability to filter for
          specific units via shell-style globs, to create smaller,
          more useful graphs. I.e. it is now possible to create simple
          graphs of all the dependencies between only target units, or
          of all units that Avahi has dependencies with.

        Contributions from: Cristian Rodríguez, Dr. Tilmann Bubeck,
        Harald Hoyer, Holger Hans Peter Freyther, Kay Sievers, Kelly
        Anderson, Koen Kooi, Lennart Poettering, Maksim Melnikau,
        Marc-Antoine Perennou, Marius Vollmer, Martin Pitt, Michal
        Schmidt, Oleksii Shevchuk, Ronny Chevalier, Simon McVittie,
        Steven Hiscocks, Thomas Weißschuh, Umut Tezduyar, Václav
        Pavlín, Zbigniew Jędrzejewski-Szmek, Łukasz Stelmach

CHANGES WITH 200:

        * The boot-time readahead implementation for rotating media
          will now read the read-ahead data in multiple passes which
          consist of all read requests made in equidistant time
          intervals. This means instead of strictly reading read-ahead
          data in its physical order on disk we now try to find a
          middle ground between physical and access time order.

        * /etc/os-release files gained a new BUILD_ID= field for usage
          on operating systems that provide continuous builds of OS
          images.

        Contributions from: Auke Kok, Eelco Dolstra, Kay Sievers,
        Lennart Poettering, Lukas Nykryn, Martin Pitt, Václav Pavlín
        William Douglas, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 199:

        * systemd-python gained an API exposing libsystemd-daemon.

        * The SMACK setup logic gained support for uploading CIPSO
          security policy.

        * Behaviour of PrivateTmp=, ReadWriteDirectories=,
          ReadOnlyDirectories= and InaccessibleDirectories= has
          changed. The private /tmp and /var/tmp directories are now
          shared by all processes of a service (which means
          ExecStartPre= may now leave data in /tmp that ExecStart= of
          the same service can still access). When a service is
          stopped its temporary directories are immediately deleted
          (normal clean-up with tmpfiles is still done in addition to
          this though).

        * By default, systemd will now set a couple of sysctl
          variables in the kernel: the safe sysrq options are turned
          on, IP route verification is turned on, and source routing
          disabled. The recently added hardlink and softlink
          protection of the kernel is turned on. These settings should
          be reasonably safe, and good defaults for all new systems.

        * The predictable network naming logic may now be turned off
          with a new kernel command line switch: net.ifnames=0.

        * A new libsystemd-bus module has been added that implements a
          pretty complete D-Bus client library. For details see:

          http://lists.freedesktop.org/archives/systemd-devel/2013-March/009797.html

        * journald will now explicitly flush the journal files to disk
          at the latest 5min after each write. The file will then also
          be marked offline until the next write. This should increase
          reliability in case of a crash. The synchronization delay
          can be configured via SyncIntervalSec= in journald.conf.

        * There's a new remote-fs-setup.target unit that can be used
          to pull in specific services when at least one remote file
          system is to be mounted.

        * There are new targets timers.target and paths.target as
          canonical targets to pull user timer and path units in
          from. This complements sockets.target with a similar
          purpose for socket units.

        * libudev gained a new call udev_device_set_attribute_value()
          to set sysfs attributes of a device.

        * The udev daemon now sets the default number of worker
          processes executed in parallel based on the number of available
          CPUs instead of the amount of available RAM. This is supposed
          to provide a more reliable default and limit a too aggressive
          paralellism for setups with 1000s of devices connected.

        Contributions from: Auke Kok, Colin Walters, Cristian
        Rodríguez, Daniel Buch, Dave Reisner, Frederic Crozat, Hannes
        Reinecke, Harald Hoyer, Jan Alexander Steffens, Jan
        Engelhardt, Josh Triplett, Kay Sievers, Lennart Poettering,
        Mantas Mikulėnas, Martin Pitt, Mathieu Bridon, Michael Biebl,
        Michal Schmidt, Michal Sekletar, Miklos Vajna, Nathaniel Chen,
        Oleksii Shevchuk, Ozan Çağlayan, Thomas Hindoe Paaboel
        Andersen, Tollef Fog Heen, Tom Gundersen, Umut Tezduyar,
        Zbigniew Jędrzejewski-Szmek

CHANGES WITH 198:

        * Configuration of unit files may now be extended via drop-in
          files without having to edit/override the unit files
          themselves. More specifically, if the administrator wants to
          change one value for a service file foobar.service he can
          now do so by dropping in a configuration snippet into
          /etc/systemd/system/foobar.service.d/*.conf. The unit logic
          will load all these snippets and apply them on top of the
          main unit configuration file, possibly extending or
          overriding its settings. Using these drop-in snippets is
          generally nicer than the two earlier options for changing
          unit files locally: copying the files from
          /usr/lib/systemd/system/ to /etc/systemd/system/ and editing
          them there; or creating a new file in /etc/systemd/system/
          that incorporates the original one via ".include". Drop-in
          snippets into these .d/ directories can be placed in any
          directory systemd looks for units in, and the usual
          overriding semantics between /usr/lib, /etc and /run apply
          for them too.

        * Most unit file settings which take lists of items can now be
          reset by assigning the empty string to them. For example,
          normally, settings such as Environment=FOO=BAR append a new
          environment variable assignment to the environment block,
          each time they are used. By assigning Environment= the empty
          string the environment block can be reset to empty. This is
          particularly useful with the .d/*.conf drop-in snippets
          mentioned above, since this adds the ability to reset list
          settings from vendor unit files via these drop-ins.

        * systemctl gained a new "list-dependencies" command for
          listing the dependencies of a unit recursively.

        * Inhibitors are now honored and listed by "systemctl
          suspend", "systemctl poweroff" (and similar) too, not only
          GNOME. These commands will also list active sessions by
          other users.

        * Resource limits (as exposed by the various control group
          controllers) can now be controlled dynamically at runtime
          for all units. More specifically, you can now use a command
          like "systemctl set-cgroup-attr foobar.service cpu.shares
          2000" to alter the CPU shares a specific service gets. These
          settings are stored persistently on disk, and thus allow the
          administrator to easily adjust the resource usage of
          services with a few simple commands. This dynamic resource
          management logic is also available to other programs via the
          bus. Almost any kernel cgroup attribute and controller is
          supported.

        * systemd-vconsole-setup will now copy all font settings to
          all allocated VTs, where it previously applied them only to
          the foreground VT.

        * libsystemd-login gained the new sd_session_get_tty() API
          call.

        * This release drops support for a few legacy or
          distribution-specific LSB facility names when parsing init
          scripts: $x-display-manager, $mail-transfer-agent,
          $mail-transport-agent, $mail-transfer-agent, $smtp,
          $null. Also, the mail-transfer-agent.target unit backing
          this has been removed. Distributions which want to retain
          compatibility with this should carry the burden for
          supporting this themselves and patch support for these back
          in, if they really need to. Also, the facilities $syslog and
          $local_fs are now ignored, since systemd does not support
          early-boot LSB init scripts anymore, and these facilities
          are implied anyway for normal services. syslog.target has
          also been removed.

        * There are new bus calls on PID1's Manager object for
          cancelling jobs, and removing snapshot units. Previously,
          both calls were only available on the Job and Snapshot
          objects themselves.

        * systemd-journal-gatewayd gained SSL support.

        * The various "environment" files, such as /etc/locale.conf
          now support continuation lines with a backslash ("\") as
          last character in the line, similar in style (but different)
          to how this is supported in shells.

        * For normal user processes the _SYSTEMD_USER_UNIT= field is
          now implicitly appended to every log entry logged. systemctl
          has been updated to filter by this field when operating on a
          user systemd instance.

        * nspawn will now implicitly add the CAP_AUDIT_WRITE and
          CAP_AUDIT_CONTROL capabilities to the capabilities set for
          the container. This makes it easier to boot unmodified
          Fedora systems in a container, which however still requires
          audit=0 to be passed on the kernel command line. Auditing in
          kernel and userspace is unfortunately still too broken in
          context of containers, hence we recommend compiling it out
          of the kernel or using audit=0. Hopefully this will be fixed
          one day for good in the kernel.

        * nspawn gained the new --bind= and --bind-ro= parameters to
          bind mount specific directories from the host into the
          container.

        * nspawn will now mount its own devpts file system instance
          into the container, in order not to leak pty devices from
          the host into the container.

        * systemd will now read the firmware boot time performance
          information from the EFI variables, if the used boot loader
          supports this, and takes it into account for boot performance
          analysis via "systemd-analyze". This is currently supported
          only in conjunction with Gummiboot, but could be supported
          by other boot loaders too. For details see:

          http://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface

        * A new generator has been added that automatically mounts the
          EFI System Partition (ESP) to /boot, if that directory
          exists, is empty, and no other file system has been
          configured to be mounted there.

        * logind will now send out PrepareForSleep(false) out
          unconditionally, after coming back from suspend. This may be
          used by applications as asynchronous notification for
          system resume events.

        * "systemctl unlock-sessions" has been added, that allows
          unlocking the screens of all user sessions at once, similar
          how "systemctl lock-sessions" already locked all users
          sessions. This is backed by a new D-Bus call UnlockSessions().

        * "loginctl seat-status" will now show the master device of a
          seat. (i.e. the device of a seat that needs to be around for
          the seat to be considered available, usually the graphics
          card).

        * tmpfiles gained a new "X" line type, that allows
          configuration of files and directories (with wildcards) that
          shall be excluded from automatic cleanup ("aging").

        * udev default rules set the device node permissions now only
          at "add" events, and do not change them any longer with a
          later "change" event.

        * The log messages for lid events and power/sleep keypresses
          now carry a message ID.

        * We now have a substantially larger unit test suite, but this
          continues to be work in progress.

        * udevadm hwdb gained a new --root= parameter to change the
          root directory to operate relative to.

        * logind will now issue a background sync() request to the kernel
          early at shutdown, so that dirty buffers are flushed to disk early
          instead of at the last moment, in order to optimize shutdown
          times a little.

        * A new bootctl tool has been added that is an interface for
          certain boot loader operations. This is currently a preview
          and is likely to be extended into a small mechanism daemon
          like timedated, localed, hostnamed, and can be used by
          graphical UIs to enumerate available boot options, and
          request boot into firmware operations.

        * systemd-bootchart has been relicensed to LGPLv2.1+ to match
          the rest of the package. It also has been updated to work
          correctly in initrds.

        * Policykit previously has been runtime optional, and is now
          also compile time optional via a configure switch.

        * systemd-analyze has been reimplemented in C. Also "systemctl
          dot" has moved into systemd-analyze.

        * "systemctl status" with no further parameters will now print
          the status of all active or failed units.

        * Operations such as "systemctl start" can now be executed
          with a new mode "--irreversible" which may be used to queue
          operations that cannot accidentally be reversed by a later
          job queuing. This is by default used to make shutdown
          requests more robust.

        * The Python API of systemd now gained a new module for
          reading journal files.

        * A new tool kernel-install has been added that can install
          kernel images according to the Boot Loader Specification:

          http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec

        * Boot time console output has been improved to provide
          animated boot time output for hanging jobs.

        * A new tool systemd-activate has been added which can be used
          to test socket activation with, directly from the command
          line. This should make it much easier to test and debug
          socket activation in daemons.

        * journalctl gained a new "--reverse" (or -r) option to show
          journal output in reverse order (i.e. newest line first).

        * journalctl gained a new "--pager-end" (or -e) option to jump
          to immediately jump to the end of the journal in the
          pager. This is only supported in conjunction with "less".

        * journalctl gained a new "--user-unit=" option, that works
          similar to "--unit=" but filters for user units rather than
          system units.

        * A number of unit files to ease adoption of systemd in
          initrds has been added. This moves some minimal logic from
          the various initrd implementations into systemd proper.

        * The journal files are now owned by a new group
          "systemd-journal", which exists specifically to allow access
          to the journal, and nothing else. Previously, we used the
          "adm" group for that, which however possibly covers more
          than just journal/log file access. This new group is now
          already used by systemd-journal-gatewayd to ensure this
          daemon gets access to the journal files and as little else
          as possible. Note that "make install" will also set FS ACLs
          up for /var/log/journal to give "adm" and "wheel" read
          access to it, in addition to "systemd-journal" which owns
          the journal files. We recommend that packaging scripts also
          add read access to "adm" + "wheel" to /var/log/journal, and
          all existing/future journal files. To normal users and
          administrators little changes, however packagers need to
          ensure to create the "systemd-journal" system group at
          package installation time.

        * The systemd-journal-gatewayd now runs as unprivileged user
          systemd-journal-gateway:systemd-journal-gateway. Packaging
          scripts need to create these system user/group at
          installation time.

        * timedated now exposes a new boolean property CanNTP that
          indicates whether a local NTP service is available or not.

        * systemd-detect-virt will now also detect xen PVs

        * The pstore file system is now mounted by default, if it is
          available.

        * In addition to the SELinux and IMA policies we will now also
          load SMACK policies at early boot.

        Contributions from: Adel Gadllah, Aleksander Morgado, Auke
        Kok, Ayan George, Bastien Nocera, Colin Walters, Daniel Buch,
        Daniel Wallace, Dave Reisner, David Herrmann, David Strauss,
        Eelco Dolstra, Enrico Scholz, Frederic Crozat, Harald Hoyer,
        Jan Janssen, Jonathan Callen, Kay Sievers, Lennart Poettering,
        Lukas Nykryn, Mantas Mikulėnas, Marc-Antoine Perennou, Martin
        Pitt, Mauro Dreissig, Max F. Albrecht, Michael Biebl, Michael
        Olbrich, Michal Schmidt, Michal Sekletar, Michal Vyskocil,
        Michał Bartoszkiewicz, Mirco Tischler, Nathaniel Chen, Nestor
        Ovroy, Oleksii Shevchuk, Paul W. Frields, Piotr Drąg, Rob
        Clark, Ryan Lortie, Simon McVittie, Simon Peeters, Steven
        Hiscocks, Thomas Hindoe Paaboel Andersen, Tollef Fog Heen, Tom
        Gundersen, Umut Tezduyar, William Giokas, Zbigniew
        Jędrzejewski-Szmek, Zeeshan Ali (Khattak)

CHANGES WITH 197:

        * Timer units now support calendar time events in addition to
          monotonic time events. That means you can now trigger a unit
          based on a calendar time specification such as "Thu,Fri
          2013-*-1,5 11:12:13" which refers to 11:12:13 of the first
          or fifth day of any month of the year 2013, given that it is
          a thursday or friday. This brings timer event support
          considerably closer to cron's capabilities. For details on
          the supported calendar time specification language see
          systemd.time(7).

        * udev now supports a number of different naming policies for
          network interfaces for predictable names, and a combination
          of these policies is now the default. Please see this wiki
          document for details:

          http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames

        * Auke Kok's bootchart implementation has been added to the
          systemd tree. It is an optional component that can graph the
          boot in quite some detail. It is one of the best bootchart
          implementations around and minimal in its code and
          dependencies.

        * nss-myhostname has been integrated into the systemd source
          tree. nss-myhostname guarantees that the local hostname
          always stays resolvable via NSS. It has been a weak
          requirement of systemd-hostnamed since a long time, and
          since its code is actually trivial we decided to just
          include it in systemd's source tree. It can be turned off
          with a configure switch.

        * The read-ahead logic is now capable of properly detecting
          whether a btrfs file system is on SSD or rotating media, in
          order to optimize the read-ahead scheme. Previously, it was
          only capable of detecting this on traditional file systems
          such as ext4.

        * In udev, additional device properties are now read from the
          IAB in addition to the OUI database. Also, Bluetooth company
          identities are attached to the devices as well.

        * In service files %U may be used as specifier that is
          replaced by the configured user name of the service.

        * nspawn may now be invoked without a controlling TTY. This
          makes it suitable for invocation as its own service. This
          may be used to set up a simple containerized server system
          using only core OS tools.

        * systemd and nspawn can now accept socket file descriptors
          when they are started for socket activation. This enables
          implementation of socket activated nspawn
          containers. i.e. think about autospawning an entire OS image
          when the first SSH or HTTP connection is received. We expect
          that similar functionality will also be added to libvirt-lxc
          eventually.

        * journalctl will now suppress ANSI color codes when
          presenting log data.

        * systemctl will no longer show control group information for
          a unit if a the control group is empty anyway.

        * logind can now automatically suspend/hibernate/shutdown the
          system on idle.

        * /etc/machine-info and hostnamed now also expose the chassis
          type of the system. This can be used to determine whether
          the local system is a laptop, desktop, handset or
          tablet. This information may either be configured by the
          user/vendor or is automatically determined from ACPI and DMI
          information if possible.

        * A number of PolicyKit actions are now bound together with
          "imply" rules. This should simplify creating UIs because
          many actions will now authenticate similar ones as well.

        * Unit files learnt a new condition ConditionACPower= which
          may be used to conditionalize a unit depending on whether an
          AC power source is connected or not, of whether the system
          is running on battery power.

        * systemctl gained a new "is-failed" verb that may be used in
          shell scripts and suchlike to check whether a specific unit
          is in the "failed" state.

        * The EnvironmentFile= setting in unit files now supports file
          globbing, and can hence be used to easily read a number of
          environment files at once.

        * systemd will no longer detect and recognize specific
          distributions. All distribution-specific #ifdeffery has been
          removed, systemd is now fully generic and
          distribution-agnostic. Effectively, not too much is lost as
          a lot of the code is still accessible via explicit configure
          switches. However, support for some distribution specific
          legacy configuration file formats has been dropped. We
          recommend distributions to simply adopt the configuration
          files everybody else uses now and convert the old
          configuration from packaging scripts. Most distributions
          already did that. If that's not possible or desirable,
          distributions are welcome to forward port the specific
          pieces of code locally from the git history.

        * When logging a message about a unit systemd will now always
          log the unit name in the message meta data.

        * localectl will now also discover system locale data that is
          not stored in locale archives, but directly unpacked.

        * logind will no longer unconditionally use framebuffer
          devices as seat masters, i.e. as devices that are required
          to be existing before a seat is considered preset. Instead,
          it will now look for all devices that are tagged as
          "seat-master" in udev. By default framebuffer devices will
          be marked as such, but depending on local systems other
          devices might be marked as well. This may be used to
          integrate graphics cards using closed source drivers (such
          as NVidia ones) more nicely into logind. Note however, that
          we recommend using the open source NVidia drivers instead,
          and no udev rules for the closed-source drivers will be
          shipped from us upstream.

        Contributions from: Adam Williamson, Alessandro Crismani, Auke
        Kok, Colin Walters, Daniel Wallace, Dave Reisner, David
        Herrmann, David Strauss, Dimitrios Apostolou, Eelco Dolstra,
        Eric Benoit, Giovanni Campagna, Hannes Reinecke, Henrik
        Grindal Bakken, Hermann Gausterer, Kay Sievers, Lennart
        Poettering, Lukas Nykryn, Mantas Mikulėnas, Marcel Holtmann,
        Martin Pitt, Matthew Monaco, Michael Biebl, Michael Terry,
        Michal Schmidt, Michal Sekletar, Michał Bartoszkiewicz, Oleg
        Samarin, Pekka Lundstrom, Philip Nilsson, Ramkumar
        Ramachandra, Richard Yao, Robert Millan, Sami Kerola, Shawn
        Landden, Thomas Hindoe Paaboel Andersen, Thomas Jarosch,
        Tollef Fog Heen, Tom Gundersen, Umut Tezduyar, Zbigniew
        Jędrzejewski-Szmek

CHANGES WITH 196:

        * udev gained support for loading additional device properties
          from an indexed database that is keyed by vendor/product IDs
          and similar device identifiers. For the beginning this
          "hwdb" is populated with data from the well-known PCI and
          USB database, but also includes PNP, ACPI and OID data. In
          the longer run this indexed database shall grow into
          becoming the one central database for non-essential
          userspace device metadata. Previously, data from the PCI/USB
          database was only attached to select devices, since the
          lookup was a relatively expensive operation due to O(n) time
          complexity (with n being the number of entries in the
          database). Since this is now O(1), we decided to add in this
          data for all devices where this is available, by
          default. Note that the indexed database needs to be rebuilt
          when new data files are installed. To achieve this you need
          to update your packaging scripts to invoke "udevadm hwdb
          --update" after installation of hwdb data files. For
          RPM-based distributions we introduced the new
          %udev_hwdb_update macro for this purpose.

        * The Journal gained support for the "Message Catalog", an
          indexed database to link up additional information with
          journal entries. For further details please check:

          http://www.freedesktop.org/wiki/Software/systemd/catalog

          The indexed message catalog database also needs to be
          rebuilt after installation of message catalog files. Use
          "journalctl --update-catalog" for this. For RPM-based
          distributions we introduced the %journal_catalog_update
          macro for this purpose.

        * The Python Journal bindings gained support for the standard
          Python logging framework.

        * The Journal API gained new functions for checking whether
          the underlying file system of a journal file is capable of
          properly reporting file change notifications, or whether
          applications that want to reflect journal changes "live"
          need to recheck journal files continuously in appropriate
          time intervals.

        * It is now possible to set the "age" field for tmpfiles
          entries to 0, indicating that files matching this entry
          shall always be removed when the directories are cleaned up.

        * coredumpctl gained a new "gdb" verb which invokes gdb
          right-away on the selected coredump.

        * There's now support for "hybrid sleep" on kernels that
          support this, in addition to "suspend" and "hibernate". Use
          "systemctl hybrid-sleep" to make use of this.

        * logind's HandleSuspendKey= setting (and related settings)
          now gained support for a new "lock" setting to simply
          request the screen lock on all local sessions, instead of
          actually executing a suspend or hibernation.

        * systemd will now mount the EFI variables file system by
          default.

        * Socket units now gained support for configuration of the
          SMACK security label.

        * timedatectl will now output the time of the last and next
          daylight saving change.

        * We dropped support for various legacy and distro-specific
          concepts, such as insserv, early-boot SysV services
          (i.e. those for non-standard runlevels such as 'b' or 'S')
          or ArchLinux /etc/rc.conf support. We recommend the
          distributions who still need support this to either continue
          to maintain the necessary patches downstream, or find a
          different solution. (Talk to us if you have questions!)

        * Various systemd components will now bypass PolicyKit checks
          for root and otherwise handle properly if PolicyKit is not
          found to be around. This should fix most issues for
          PolicyKit-less systems. Quite frankly this should have been
          this way since day one. It is absolutely our intention to
          make systemd work fine on PolicyKit-less systems, and we
          consider it a bug if something does not work as it should if
          PolicyKit is not around.

        * For embedded systems it is now possible to build udev and
          systemd without blkid and/or kmod support.

        * "systemctl switch-root" is now capable of switching root
          more than once. I.e. in addition to transitions from the
          initrd to the host OS it is now possible to transition to
          further OS images from the host. This is useful to implement
          offline updating tools.

        * Various other additions have been made to the RPM macros
          shipped with systemd. Use %udev_rules_update() after
          installing new udev rules files. %_udevhwdbdir,
          %_udevrulesdir, %_journalcatalogdir, %_tmpfilesdir,
          %_sysctldir are now available which resolve to the right
          directories for packages to place various data files in.

        * journalctl gained the new --full switch (in addition to
          --all, to disable ellipsation for long messages.

        Contributions from: Anders Olofsson, Auke Kok, Ben Boeckel,
        Colin Walters, Cosimo Cecchi, Daniel Wallace, Dave Reisner,
        Eelco Dolstra, Holger Hans Peter Freyther, Kay Sievers,
        Chun-Yi Lee, Lekensteyn, Lennart Poettering, Mantas Mikulėnas,
        Marti Raudsepp, Martin Pitt, Mauro Dreissig, Michael Biebl,
        Michal Schmidt, Michal Sekletar, Miklos Vajna, Nis Martensen,
        Oleksii Shevchuk, Olivier Brunel, Ramkumar Ramachandra, Thomas
        Bächler, Thomas Hindoe Paaboel Andersen, Tom Gundersen, Tony
        Camuso, Umut Tezduyar, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 195:

        * journalctl gained new --since= and --until= switches to
          filter by time. It also now supports nice filtering for
          units via --unit=/-u.

        * Type=oneshot services may use ExecReload= and do the
          right thing.

        * The journal daemon now supports time-based rotation and
          vacuuming, in addition to the usual disk-space based
          rotation.

        * The journal will now index the available field values for
          each field name. This enables clients to show pretty drop
          downs of available match values when filtering. The bash
          completion of journalctl has been updated
          accordingly. journalctl gained a new switch -F to list all
          values a certain field takes in the journal database.

        * More service events are now written as structured messages
          to the journal, and made recognizable via message IDs.

        * The timedated, localed and hostnamed mini-services which
          previously only provided support for changing time, locale
          and hostname settings from graphical DEs such as GNOME now
          also have a minimal (but very useful) text-based client
          utility each. This is probably the nicest way to changing
          these settings from the command line now, especially since
          it lists available options and is fully integrated with bash
          completion.

        * There's now a new tool "systemd-coredumpctl" to list and
          extract coredumps from the journal.

        * We now install a README each in /var/log/ and
          /etc/rc.d/init.d explaining where the system logs and init
          scripts went. This hopefully should help folks who go to
          that dirs and look into the otherwise now empty void and
          scratch their heads.

        * When user-services are invoked (by systemd --user) the
          $MANAGERPID env var is set to the PID of systemd.

        * SIGRTMIN+24 when sent to a --user instance will now result
          in immediate termination of systemd.

        * gatewayd received numerous feature additions such as a
          "follow" mode, for live syncing and filtering.

        * browse.html now allows filtering and showing detailed
          information on specific entries. Keyboard navigation and
          mouse screen support has been added.

        * gatewayd/journalctl now supports HTML5/JSON
          Server-Sent-Events as output.

        * The SysV init script compatibility logic will now
          heuristically determine whether a script supports the
          "reload" verb, and only then make this available as
          "systemctl reload".

        * "systemctl status --follow" has been removed, use "journalctl
          -u" instead.

        * journald.conf's RuntimeMinSize=, PersistentMinSize= settings
          have been removed since they are hardly useful to be
          configured.

        * And I'd like to take the opportunity to specifically mention
          Zbigniew for his great contributions. Zbigniew, you rock!

        Contributions from: Andrew Eikum, Christian Hesse, Colin
        Guthrie, Daniel J Walsh, Dave Reisner, Eelco Dolstra, Ferenc
        Wágner, Kay Sievers, Lennart Poettering, Lukas Nykryn, Mantas
        Mikulėnas, Martin Mikkelsen, Martin Pitt, Michael Olbrich,
        Michael Stapelberg, Michal Schmidt, Sebastian Ott, Thomas
        Bächler, Umut Tezduyar, Will Woods, Wulf C. Krueger, Zbigniew
        Jędrzejewski-Szmek, Сковорода Никита Андреевич

CHANGES WITH 194:

        * If /etc/vconsole.conf is non-existent or empty we will no
          longer load any console font or key map at boot by
          default. Instead the kernel defaults will be left
          intact. This is definitely the right thing to do, as no
          configuration should mean no configuration, and hard-coding
          font names that are different on all archs is probably a bad
          idea. Also, the kernel default key map and font should be
          good enough for most cases anyway, and mostly identical to
          the userspace fonts/key maps we previously overloaded them
          with. If distributions want to continue to default to a
          non-kernel font or key map they should ship a default
          /etc/vconsole.conf with the appropriate contents.

        Contributions from: Colin Walters, Daniel J Walsh, Dave
        Reisner, Kay Sievers, Lennart Poettering, Lukas Nykryn, Tollef
        Fog Heen, Tom Gundersen, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 193:

        * journalctl gained a new --cursor= switch to show entries
          starting from the specified location in the journal.

        * We now enforce a size limit on journal entry fields exported
          with "-o json" in journalctl. Fields larger than 4K will be
          assigned null. This can be turned off with --all.

        * An (optional) journal gateway daemon is now available as
          "systemd-journal-gatewayd.service". This service provides
          access to the journal via HTTP and JSON. This functionality
          will be used to implement live log synchronization in both
          pull and push modes, but has various other users too, such
          as easy log access for debugging of embedded devices. Right
          now it is already useful to retrieve the journal via HTTP:

          # systemctl start systemd-journal-gatewayd.service
          # wget http://localhost:19531/entries

          This will download the journal contents in a
          /var/log/messages compatible format. The same as JSON:

          # curl -H"Accept: application/json" http://localhost:19531/entries

          This service is also accessible via a web browser where a
          single static HTML5 app is served that uses the JSON logic
          to enable the user to do some basic browsing of the
          journal. This will be extended later on. Here's an example
          screenshot of this app in its current state:

          http://0pointer.de/public/journal-gatewayd

        Contributions from: Kay Sievers, Lennart Poettering, Robert
        Milasan, Tom Gundersen

CHANGES WITH 192:

        * The bash completion logic is now available for journalctl
          too.

        * We do not mount the "cpuset" controller anymore together with
          "cpu" and "cpuacct", as "cpuset" groups generally cannot be
          started if no parameters are assigned to it. "cpuset" hence
          broke code that assumed it it could create "cpu" groups and
          just start them.

        * journalctl -f will now subscribe to terminal size changes,
          and line break accordingly.

        Contributions from: Dave Reisner, Kay Sievers, Lennart
        Poettering, Lukas Nykrynm, Mirco Tischler, Václav Pavlín

CHANGES WITH 191:

        * nspawn will now create a symlink /etc/localtime in the
          container environment, copying the host's timezone
          setting. Previously this has been done via a bind mount, but
          since symlinks cannot be bind mounted this has now been
          changed to create/update the appropriate symlink.

        * journalctl -n's line number argument is now optional, and
          will default to 10 if omitted.

        * journald will now log the maximum size the journal files may
          take up on disk. This is particularly useful if the default
          built-in logic of determining this parameter from the file
          system size is used. Use "systemctl status
          systemd-journald.service" to see this information.

        * The multi-seat X wrapper tool has been stripped down. As X
          is now capable of enumerating graphics devices via udev in a
          seat-aware way the wrapper is not strictly necessary
          anymore. A stripped down temporary stop-gap is still shipped
          until the upstream display managers have been updated to
          fully support the new X logic. Expect this wrapper to be
          removed entirely in one of the next releases.

        * HandleSleepKey= in logind.conf has been split up into
          HandleSuspendKey= and HandleHibernateKey=. The old setting
          is not available anymore. X11 and the kernel are
          distuingishing between these keys and we should too. This
          also means the inhibition lock for these keys has been split
          into two.

        Contributions from: Dave Airlie, Eelco Dolstra, Lennart
        Poettering, Lukas Nykryn, Václav Pavlín

CHANGES WITH 190:

        * Whenever a unit changes state we will now log this to the
          journal and show along the unit's own log output in
          "systemctl status".

        * ConditionPathIsMountPoint= can now properly detect bind
          mount points too. (Previously, a bind mount of one file
          system to another place in the same file system could not be
          detected as mount, since they shared struct stat's st_dev
          field.)

        * We will now mount the cgroup controllers cpu, cpuacct,
          cpuset and the controllers net_cls, net_prio together by
          default.

        * nspawn containers will now have a virtualized boot
          ID. (i.e. /proc/sys/kernel/random/boot_id is now mounted
          over with a randomized ID at container initialization). This
          has the effect of making "journalctl -b" do the right thing
          in a container.

        * The JSON output journal serialization has been updated not
          to generate "endless" list objects anymore, but rather one
          JSON object per line. This is more in line how most JSON
          parsers expect JSON objects. The new output mode
          "json-pretty" has been added to provide similar output, but
          neatly aligned for readability by humans.

        * We dropped all explicit sync() invocations in the shutdown
          code. The kernel does this implicitly anyway in the kernel
          reboot() syscall. halt(8)'s -n option is now a compatibility
          no-op.

        * We now support virtualized reboot() in containers, as
          supported by newer kernels. We will fall back to exit() if
          CAP_SYS_REBOOT is not available to the container. Also,
          nspawn makes use of this now and will actually reboot the
          container if the containerized OS asks for that.

        * journalctl will only show local log output by default
          now. Use --merge (-m) to show remote log output, too.

        * libsystemd-journal gained the new sd_journal_get_usage()
          call to determine the current disk usage of all journal
          files. This is exposed in the new "journalctl --disk-usage"
          command.

        * journald gained a new configuration setting SplitMode= in
          journald.conf which may be used to control how user journals
          are split off. See journald.conf(5) for details.

        * A new condition type ConditionFileNotEmpty= has been added.

        * tmpfiles' "w" lines now support file globbing, to write
          multiple files at once.

        * We added Python bindings for the journal submission
          APIs. More Python APIs for a number of selected APIs will
          likely follow. Note that we intend to add native bindings
          only for the Python language, as we consider it common
          enough to deserve bindings shipped within systemd. There are
          various projects outside of systemd that provide bindings
          for languages such as PHP or Lua.

        * Many conditions will now resolve specifiers such as %i. In
          addition, PathChanged= and related directives of .path units
          now support specifiers as well.

        * There's now a new RPM macro definition for the system preset
          dir: %_presetdir.

        * journald will now warn if it ca not forward a message to the
          syslog daemon because its socket is full.

        * timedated will no longer write or process /etc/timezone,
          except on Debian. As we do not support late mounted /usr
          anymore /etc/localtime always being a symlink is now safe,
          and hence the information in /etc/timezone is not necessary
          anymore.

        * logind will now always reserve one VT for a text getty (VT6
          by default). Previously if more than 6 X sessions where
          started they took up all the VTs with auto-spawned gettys,
          so that no text gettys were available anymore.

        * udev will now automatically inform the btrfs kernel logic
          about btrfs RAID components showing up. This should make
          simple hotplug based btrfs RAID assembly work.

        * PID 1 will now increase its RLIMIT_NOFILE to 64K by default
          (but not for its children which will stay at the kernel
          default). This should allow setups with a lot more listening
          sockets.

        * systemd will now always pass the configured timezone to the
          kernel at boot. timedated will do the same when the timezone
          is changed.

        * logind's inhibition logic has been updated. By default,
          logind will now handle the lid switch, the power and sleep
          keys all the time, even in graphical sessions. If DEs want
          to handle these events on their own they should take the new
          handle-power-key, handle-sleep-key and handle-lid-switch
          inhibitors during their runtime. A simple way to achiveve
          that is to invoke the DE wrapped in an invocation of:

          systemd-inhibit --what=handle-power-key:handle-sleep-key:handle-lid-switch ...

        * Access to unit operations is now checked via SELinux taking
          the unit file label and client process label into account.

        * systemd will now notify the administrator in the journal
          when he over-mounts a non-empty directory.

        * There are new specifiers that are resolved in unit files,
          for the host name (%H), the machine ID (%m) and the boot ID
          (%b).

        Contributions from: Allin Cottrell, Auke Kok, Brandon Philips,
        Colin Guthrie, Colin Walters, Daniel J Walsh, Dave Reisner,
        Eelco Dolstra, Jan Engelhardt, Kay Sievers, Lennart
        Poettering, Lucas De Marchi, Lukas Nykryn, Mantas Mikulėnas,
        Martin Pitt, Matthias Clasen, Michael Olbrich, Pierre Schmitz,
        Shawn Landden, Thomas Hindoe Paaboel Andersen, Tom Gundersen,
        Václav Pavlín, Yin Kangkai, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 189:

        * Support for reading structured kernel messages from
          /dev/kmsg has now been added and is enabled by default.

        * Support for reading kernel messages from /proc/kmsg has now
          been removed. If you want kernel messages in the journal
          make sure to run a recent kernel (>= 3.5) that supports
          reading structured messages from /dev/kmsg (see
          above). /proc/kmsg is now exclusive property of classic
          syslog daemons again.

        * The libudev API gained the new
          udev_device_new_from_device_id() call.

        * The logic for file system namespace (ReadOnlyDirectory=,
          ReadWriteDirectoy=, PrivateTmp=) has been reworked not to
          require pivot_root() anymore. This means fewer temporary
          directories are created below /tmp for this feature.

        * nspawn containers will now see and receive all submounts
          made on the host OS below the root file system of the
          container.

        * Forward Secure Sealing is now supported for Journal files,
          which provide cryptographical sealing of journal files so
          that attackers cannot alter log history anymore without this
          being detectable. Lennart will soon post a blog story about
          this explaining it in more detail.

        * There are two new service settings RestartPreventExitStatus=
          and SuccessExitStatus= which allow configuration of exit
          status (exit code or signal) which will be excepted from the
          restart logic, resp. consider successful.

        * journalctl gained the new --verify switch that can be used
          to check the integrity of the structure of journal files and
          (if Forward Secure Sealing is enabled) the contents of
          journal files.

        * nspawn containers will now be run with /dev/stdin, /dev/fd/
          and similar symlinks pre-created. This makes running shells
          as container init process a lot more fun.

        * The fstab support can now handle PARTUUID= and PARTLABEL=
          entries.

        * A new ConditionHost= condition has been added to match
          against the hostname (with globs) and machine ID. This is
          useful for clusters where a single OS image is used to
          provision a large number of hosts which shall run slightly
          different sets of services.

        * Services which hit the restart limit will now be placed in a
          failure state.

        Contributions from: Bertram Poettering, Dave Reisner, Huang
        Hang, Kay Sievers, Lennart Poettering, Lukas Nykryn, Martin
        Pitt, Simon Peeters, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 188:

        * When running in --user mode systemd will now become a
          subreaper (PR_SET_CHILD_SUBREAPER). This should make the ps
          tree a lot more organized.

        * A new PartOf= unit dependency type has been introduced that
          may be used to group services in a natural way.

        * "systemctl enable" may now be used to enable instances of
          services.

        * journalctl now prints error log levels in red, and
          warning/notice log levels in bright white. It also supports
          filtering by log level now.

        * cgtop gained a new -n switch (similar to top), to configure
          the maximum number of iterations to run for. It also gained
          -b, to run in batch mode (accepting no input).

        * The suffix ".service" may now be omitted on most systemctl
          command lines involving service unit names.

        * There's a new bus call in logind to lock all sessions, as
          well as a loginctl verb for it "lock-sessions".

        * libsystemd-logind.so gained a new call sd_journal_perror()
          that works similar to libc perror() but logs to the journal
          and encodes structured information about the error number.

        * /etc/crypttab entries now understand the new keyfile-size=
          option.

        * shutdown(8) now can send a (configurable) wall message when
          a shutdown is cancelled.

        * The mount propagation mode for the root file system will now
          default to "shared", which is useful to make containers work
          nicely out-of-the-box so that they receive new mounts from
          the host. This can be undone locally by running "mount
          --make-rprivate /" if needed.

        * The prefdm.service file has been removed. Distributions
          should maintain this unit downstream if they intend to keep
          it around. However, we recommend writing normal unit files
          for display managers instead.

        * Since systemd is a crucial part of the OS we will now
          default to a number of compiler switches that improve
          security (hardening) such as read-only relocations, stack
          protection, and suchlike.

        * The TimeoutSec= setting for services is now split into
          TimeoutStartSec= and TimeoutStopSec= to allow configuration
          of individual time outs for the start and the stop phase of
          the service.

        Contributions from: Artur Zaprzala, Arvydas Sidorenko, Auke
        Kok, Bryan Kadzban, Dave Reisner, David Strauss, Harald Hoyer,
        Jim Meyering, Kay Sievers, Lennart Poettering, Mantas
        Mikulėnas, Martin Pitt, Michal Schmidt, Michal Sekletar, Peter
        Alfredsen, Shawn Landden, Simon Peeters, Terence Honles, Tom
        Gundersen, Zbigniew Jędrzejewski-Szmek

CHANGES WITH 187:

        * The journal and id128 C APIs are now fully documented as man
          pages.

        * Extra safety checks have been added when transitioning from
          the initial RAM disk to the main system to avoid accidental
          data loss.

        * /etc/crypttab entries now understand the new keyfile-offset=
          option.

        * systemctl -t can now be used to filter by unit load state.

        * The journal C API gained the new sd_journal_wait() call to
          make writing synchronous journal clients easier.

        * journalctl gained the new -D switch to show journals from a
          specific directory.

        * journalctl now displays a special marker between log
          messages of two different boots.

        * The journal is now explicitly flushed to /var via a service
          systemd-journal-flush.service, rather than implicitly simply
          by seeing /var/log/journal to be writable.

        * journalctl (and the journal C APIs) can now match for much
          more complex expressions, with alternatives and
          disjunctions.

        * When transitioning from the initial RAM disk to the main
          system we will now kill all processes in a killing spree to
          ensure no processes stay around by accident.

        * Three new specifiers may be used in unit files: %u, %h, %s
          resolve to the user name, user home directory resp. user
          shell. This is useful for running systemd user instances.

        * We now automatically rotate journal files if their data
          object hash table gets a fill level > 75%. We also size the
          hash table based on the configured maximum file size. This
          together should lower hash collisions drastically and thus
          speed things up a bit.

        * journalctl gained the new "--header" switch to introspect
          header data of journal files.

        * A new setting SystemCallFilters= has been added to services
          which may be used to apply blacklists or whitelists to
          system calls. This is based on SECCOMP Mode 2 of Linux 3.5.

        * nspawn gained a new --link-journal= switch (and quicker: -j)
          to link the container journal with the host. This makes it
          very easy to centralize log viewing on the host for all
          guests while still keeping the journal files separated.

        * Many bugfixes and optimizations

        Contributions from: Auke Kok, Eelco Dolstra, Harald Hoyer, Kay
        Sievers, Lennart Poettering, Malte Starostik, Paul Menzel, Rex
        Tsai, Shawn Landden, Tom Gundersen, Ville Skyttä, Zbigniew
        Jędrzejewski-Szmek

CHANGES WITH 186:

        * Several tools now understand kernel command line arguments,
          which are only read when run in an initial RAM disk. They
          usually follow closely their normal counterparts, but are
          prefixed with rd.

        * There's a new tool to analyze the readahead files that are
          automatically generated at boot. Use:

          /usr/lib/systemd/systemd-readahead analyze /.readahead

        * We now provide an early debug shell on tty9 if this enabled. Use:

          systemctl enable debug-shell.service

        * All plymouth related units have been moved into the Plymouth
          package. Please make sure to upgrade your Plymouth version
          as well.

        * systemd-tmpfiles now supports getting passed the basename of
          a configuration file only, in which case it will look for it
          in all appropriate directories automatically.

        * udevadm info now takes a /dev or /sys path as argument, and
          does the right thing. Example:

          udevadm info /dev/sda
          udevadm info /sys/class/block/sda

        * systemctl now prints a warning if a unit is stopped but a
          unit that might trigger it continues to run. Example: a
          service is stopped but the socket that activates it is left
          running.

        * "systemctl status" will now mention if the log output was
          shortened due to rotation since a service has been started.

        * The journal API now exposes functions to determine the
          "cutoff" times due to rotation.

        * journald now understands SIGUSR1 and SIGUSR2 for triggering
          immediately flushing of runtime logs to /var if possible,
          resp. for triggering immediate rotation of the journal
          files.

        * It is now considered an error if a service is attempted to
          be stopped that is not loaded.

        * XDG_RUNTIME_DIR now uses numeric UIDs instead of usernames.

        * systemd-analyze now supports Python 3

        * tmpfiles now supports cleaning up directories via aging
          where the first level dirs are always kept around but
          directories beneath it automatically aged. This is enabled
          by prefixing the age field with '~'.

        * Seat objects now expose CanGraphical, CanTTY properties
          which is required to deal with very fast bootups where the
          display manager might be running before the graphics drivers
          completed initialization.

        * Seat objects now expose a State property.

        * We now include RPM macros for service enabling/disabling
          based on the preset logic. We recommend RPM based
          distributions to make use of these macros if possible. This
          makes it simpler to reuse RPM spec files across
          distributions.

        * We now make sure that the collected systemd unit name is
          always valid when services log to the journal via
          STDOUT/STDERR.

        * There's a new man page kernel-command-line(7) detailing all
          command line options we understand.

        * The fstab generator may now be disabled at boot by passing
          fstab=0 on the kernel command line.

        * A new kernel command line option modules-load= is now understood
          to load a specific kernel module statically, early at boot.

        * Unit names specified on the systemctl command line are now
          automatically escaped as needed. Also, if file system or
          device paths are specified they are automatically turned
          into the appropriate mount or device unit names. Example:

          systemctl status /home
          systemctl status /dev/sda

        * The SysVConsole= configuration option has been removed from
          system.conf parsing.

        * The SysV search path is no longer exported on the D-Bus
          Manager object.

        * The Names= option is been removed from unit file parsing.

        * There's a new man page bootup(7) detailing the boot process.

        * Every unit and every generator we ship with systemd now
          comes with full documentation. The self-explanatory boot is
          complete.

        * A couple of services gained "systemd-" prefixes in their
          name if they wrap systemd code, rather than only external
          code. Among them fsck@.service which is now
          systemd-fsck@.service.

        * The HaveWatchdog property has been removed from the D-Bus
          Manager object.

        * systemd.confirm_spawn= on the kernel command line should now
          work sensibly.

        * There's a new man page crypttab(5) which details all options
          we actually understand.

        * systemd-nspawn gained a new --capability= switch to pass
          additional capabilities to the container.

        * timedated will now read known NTP implementation unit names
          from /usr/lib/systemd/ntp-units.d/*.list,
          systemd-timedated-ntp.target has been removed.

        * journalctl gained a new switch "-b" that lists log data of
          the current boot only.

        * The notify socket is in the abstract namespace again, in
          order to support daemons which chroot() at start-up.

        * There is a new Storage= configuration option for journald
          which allows configuration of where log data should go. This
          also provides a way to disable journal logging entirely, so
          that data collected is only forwarded to the console, the
          kernel log buffer or another syslog implementation.

        * Many bugfixes and optimizations

        Contributions from: Auke Kok, Colin Guthrie, Dave Reisner,
        David Strauss, Eelco Dolstra, Kay Sievers, Lennart Poettering,
        Lukas Nykryn, Michal Schmidt, Michal Sekletar, Paul Menzel,
        Shawn Landden, Tom Gundersen

CHANGES WITH 185:

        * "systemctl help <unit>" now shows the man page if one is
          available.

        * Several new man pages have been added.

        * MaxLevelStore=, MaxLevelSyslog=, MaxLevelKMsg=,
          MaxLevelConsole= can now be specified in
          journald.conf. These options allow reducing the amount of
          data stored on disk or forwarded by the log level.

        * TimerSlackNSec= can now be specified in system.conf for
          PID1. This allows system-wide power savings.

        Contributions from: Dave Reisner, Kay Sievers, Lauri Kasanen,
        Lennart Poettering, Malte Starostik, Marc-Antoine Perennou,
        Matthias Clasen

CHANGES WITH 184:

        * logind is now capable of (optionally) handling power and
          sleep keys as well as the lid switch.

        * journalctl now understands the syntax "journalctl
          /usr/bin/avahi-daemon" to get all log output of a specific
          daemon.

        * CapabilityBoundingSet= in system.conf now also influences
          the capability bound set of usermode helpers of the kernel.

        Contributions from: Daniel Drake, Daniel J. Walsh, Gert
        Michael Kulyk, Harald Hoyer, Jean Delvare, Kay Sievers,
        Lennart Poettering, Matthew Garrett, Matthias Clasen, Paul
        Menzel, Shawn Landden, Tero Roponen, Tom Gundersen

CHANGES WITH 183:

        * Note that we skipped 139 releases here in order to set the
          new version to something that is greater than both udev's
          and systemd's most recent version number.

        * udev: all udev sources are merged into the systemd source tree now.
          All future udev development will happen in the systemd tree. It
          is still fully supported to use the udev daemon and tools without
          systemd running, like in initramfs or other init systems. Building
          udev though, will require the *build* of the systemd tree, but
          udev can be properly *run* without systemd.

        * udev: /lib/udev/devices/ are not read anymore; systemd-tmpfiles
          should be used to create dead device nodes as workarounds for broken
          subsystems.

        * udev: RUN+="socket:..."  and udev_monitor_new_from_socket() is
          no longer supported. udev_monitor_new_from_netlink() needs to be
          used to subscribe to events.

        * udev: when udevd is started by systemd, processes which are left
          behind by forking them off of udev rules, are unconditionally cleaned
          up and killed now after the event handling has finished. Services or
          daemons must be started as systemd services. Services can be
          pulled-in by udev to get started, but they can no longer be directly
          forked by udev rules.

        * udev: the daemon binary is called systemd-udevd now and installed
          in /usr/lib/systemd/. Standalone builds or non-systemd systems need
          to adapt to that, create symlink, or rename the binary after building
          it.

        * libudev no longer provides these symbols:
            udev_monitor_from_socket()
            udev_queue_get_failed_list_entry()
            udev_get_{dev,sys,run}_path()
          The versions number was bumped and symbol versioning introduced.

        * systemd-loginctl and systemd-journalctl have been renamed
          to loginctl and journalctl to match systemctl.

        * The config files: /etc/systemd/systemd-logind.conf and
          /etc/systemd/systemd-journald.conf have been renamed to
          logind.conf and journald.conf. Package updates should rename
          the files to the new names on upgrade.

        * For almost all files the license is now LGPL2.1+, changed
          from the previous GPL2.0+. Exceptions are some minor stuff
          of udev (which will be changed to LGPL2.1 eventually, too),
          and the MIT licensed sd-daemon.[ch] library that is suitable
          to be used as drop-in files.

        * systemd and logind now handle system sleep states, in
          particular suspending and hibernating.

        * logind now implements a sleep/shutdown/idle inhibiting logic
          suitable for a variety of uses. Soonishly Lennart will blog
          about this in more detail.

        * var-run.mount and var-lock.mount are no longer provided
          (which prevously bind mounted these directories to their new
          places). Distributions which have not converted these
          directories to symlinks should consider stealing these files
          from git history and add them downstream.

        * We introduced the Documentation= field for units and added
          this to all our shipped units. This is useful to make it
          easier to explore the boot and the purpose of the various
          units.

        * All smaller setup units (such as
          systemd-vconsole-setup.service) now detect properly if they
          are run in a container and are skipped when
          appropriate. This guarantees an entirely noise-free boot in
          Linux container environments such as systemd-nspawn.

        * A framework for implementing offline system updates is now
          integrated, for details see:
          http://freedesktop.org/wiki/Software/systemd/SystemUpdates

        * A new service type Type=idle is available now which helps us
          avoiding ugly interleaving of getty output and boot status
          messages.

        * There's now a system-wide CapabilityBoundingSet= option to
          globally reduce the set of capabilities for the
          system. This is useful to drop CAP_SYS_MKNOD, CAP_SYS_RAWIO,
          CAP_NET_RAW, CAP_SYS_MODULE, CAP_SYS_TIME, CAP_SYS_PTRACE or
          even CAP_NET_ADMIN system-wide for secure systems.

        * There are now system-wide DefaultLimitXXX= options to
          globally change the defaults of the various resource limits
          for all units started by PID 1.

        * Harald Hoyer's systemd test suite has been integrated into
          systemd which allows easy testing of systemd builds in qemu
          and nspawn. (This is really awesome! Ask us for details!)

        * The fstab parser is now implemented as generator, not inside
          of PID 1 anymore.

        * systemctl will now warn you if .mount units generated from
          /etc/fstab are out of date due to changes in fstab that
          have not been read by systemd yet.

        * systemd is now suitable for usage in initrds. Dracut has
          already been updated to make use of this. With this in place
          initrds get a slight bit faster but primarily are much
          easier to introspect and debug since "systemctl status" in
          the host system can be used to introspect initrd services,
          and the journal from the initrd is kept around too.

        * systemd-delta has been added, a tool to explore differences
          between user/admin configuration and vendor defaults.

        * PrivateTmp= now affects both /tmp and /var/tmp.

        * Boot time status messages are now much prettier and feature
          proper english language. Booting up systemd has never been
          so sexy.

        * Read-ahead pack files now include the inode number of all
          files to pre-cache. When the inode changes the pre-caching
          is not attempted. This should be nicer to deal with updated
          packages which might result in changes of read-ahead
          patterns.

        * We now temporaritly lower the kernel's read_ahead_kb variable
          when collecting read-ahead data to ensure the kernel's
          built-in read-ahead does not add noise to our measurements
          of necessary blocks to pre-cache.

        * There's now RequiresMountsFor= to add automatic dependencies
          for all mounts necessary for a specific file system path.

        * MountAuto= and SwapAuto= have been removed from
          system.conf. Mounting file systems at boot has to take place
          in systemd now.

        * nspawn now learned a new switch --uuid= to set the machine
          ID on the command line.

        * nspawn now learned the -b switch to automatically search
          for an init system.

        * vt102 is now the default TERM for serial TTYs, upgraded from
          vt100.

        * systemd-logind now works on VT-less systems.

        * The build tree has been reorganized. The individual
          components now have directories of their own.

        * A new condition type ConditionPathIsReadWrite= is now available.

        * nspawn learned the new -C switch to create cgroups for the
          container in other hierarchies.

        * We now have support for hardware watchdogs, configurable in
          system.conf.

        * The scheduled shutdown logic now has a public API.

        * We now mount /tmp as tmpfs by default, but this can be
          masked and /etc/fstab can override it.

        * Since udisks does not make use of /media anymore we are not
          mounting a tmpfs on it anymore.

        * journalctl gained a new --local switch to only interleave
          locally generated journal files.

        * We can now load the IMA policy at boot automatically.

        * The GTK tools have been split off into a systemd-ui.

        Contributions from: Andreas Schwab, Auke Kok, Ayan George,
        Colin Guthrie, Daniel Mack, Dave Reisner, David Ward, Elan
        Ruusamäe, Frederic Crozat, Gergely Nagy, Guillermo Vidal,
        Hannes Reinecke, Harald Hoyer, Javier Jardón, Kay Sievers,
        Lennart Poettering, Lucas De Marchi, Léo Gillot-Lamure,
        Marc-Antoine Perennou, Martin Pitt, Matthew Monaco, Maxim
        A. Mikityanskiy, Michael Biebl, Michael Olbrich, Michal
        Schmidt, Nis Martensen, Patrick McCarty, Roberto Sassu, Shawn
        Landden, Sjoerd Simons, Sven Anders, Tollef Fog Heen, Tom
        Gundersen

CHANGES WITH 44:

        * This is mostly a bugfix release

        * Support optional initialization of the machine ID from the
          KVM or container configured UUID.

        * Support immediate reboots with "systemctl reboot -ff"

        * Show /etc/os-release data in systemd-analyze output

        * Many bugfixes for the journal, including endianness fixes and
          ensuring that disk space enforcement works

        * sd-login.h is C++ comptaible again

        * Extend the /etc/os-release format on request of the Debian
          folks

        * We now refuse non-UTF8 strings used in various configuration
          and unit files. This is done to ensure we do not pass invalid
          data over D-Bus or expose it elsewhere.

        * Register Mimo USB Screens as suitable for automatic seat
          configuration

        * Read SELinux client context from journal clients in a race
          free fashion

        * Reorder configuration file lookup order. /etc now always
          overrides /run in order to allow the administrator to always
          and unconditionally override vendor supplied or
          automatically generated data.

        * The various user visible bits of the journal now have man
          pages. We still lack man pages for the journal API calls
          however.

        * We now ship all man pages in HTML format again in the
          tarball.

        Contributions from: Dave Reisner, Dirk Eibach, Frederic
        Crozat, Harald Hoyer, Kay Sievers, Lennart Poettering, Marti
        Raudsepp, Michal Schmidt, Shawn Landden, Tero Roponen, Thierry
        Reding

CHANGES WITH 43:

        * This is mostly a bugfix release

        * systems lacking /etc/os-release  are no longer supported.

        * Various functionality updates to libsystemd-login.so

        * Track class of PAM logins to distuingish greeters from
          normal user logins.

        Contributions from: Kay Sievers, Lennart Poettering, Michael
        Biebl

CHANGES WITH 42:

        * This is an important bugfix release for v41.

        * Building man pages is now optional which should be useful
          for those building systemd from git but unwilling to install
          xsltproc.

        * Watchdog support for supervising services is now usable. In
          a future release support for hardware watchdogs
          (i.e. /dev/watchdog) will be added building on this.

        * Service start rate limiting is now configurable and can be
          turned off per service. When a start rate limit is hit a
          reboot can automatically be triggered.

        * New CanReboot(), CanPowerOff() bus calls in systemd-logind.

        Contributions from: Benjamin Franzke, Bill Nottingham,
        Frederic Crozat, Lennart Poettering, Michael Olbrich, Michal
        Schmidt, Michał Górny, Piotr Drąg

CHANGES WITH 41:

        * The systemd binary is installed /usr/lib/systemd/systemd now;
          An existing /sbin/init symlink needs to be adapted with the
          package update.

        * The code that loads kernel modules has been ported to invoke
          libkmod directly, instead of modprobe. This means we do not
          support systems with module-init-tools anymore.

        * Watchdog support is now already useful, but still not
          complete.

        * A new kernel command line option systemd.setenv= is
          understood to set system wide environment variables
          dynamically at boot.

        * We now limit the set of capabilities of systemd-journald.

        * We now set SIGPIPE to ignore by default, since it only is
          useful in shell pipelines, and has little use in general
          code. This can be disabled with IgnoreSIPIPE=no in unit
          files.

        Contributions from: Benjamin Franzke, Kay Sievers, Lennart
        Poettering, Michael Olbrich, Michal Schmidt, Tom Gundersen,
        William Douglas

CHANGES WITH 40:

        * This is mostly a bugfix release

        * We now expose the reason why a service failed in the
          "Result" D-Bus property.

        * Rudimentary service watchdog support (will be completed over
          the next few releases.)

        * When systemd forks off in order execute some service we will
          now immediately changes its argv[0] to reflect which process
          it will execute. This is useful to minimize the time window
          with a generic argv[0], which makes bootcharts more useful

        Contributions from: Alvaro Soliverez, Chris Paulson-Ellis, Kay
        Sievers, Lennart Poettering, Michael Olbrich, Michal Schmidt,
        Mike Kazantsev, Ray Strode

CHANGES WITH 39:

        * This is mostly a test release, but incorporates many
          bugfixes.

        * New systemd-cgtop tool to show control groups by their
          resource usage.

        * Linking against libacl for ACLs is optional again. If
          disabled, support tracking device access for active logins
          goes becomes unavailable, and so does access to the user
          journals by the respective users.

        * If a group "adm" exists, journal files are automatically
          owned by them, thus allow members of this group full access
          to the system journal as well as all user journals.

        * The journal now stores the SELinux context of the logging
          client for all entries.

        * Add C++ inclusion guards to all public headers

        * New output mode "cat" in the journal to print only text
          messages, without any meta data like date or time.

        * Include tiny X server wrapper as a temporary stop-gap to
          teach XOrg udev display enumeration. This is used by display
          managers such as gdm, and will go away as soon as XOrg
          learned native udev hotplugging for display devices.

        * Add new systemd-cat tool for executing arbitrary programs
          with STDERR/STDOUT connected to the journal. Can also act as
          BSD logger replacement, and does so by default.

        * Optionally store all locally generated coredumps in the
          journal along with meta data.

        * systemd-tmpfiles learnt four new commands: n, L, c, b, for
          writing short strings to files (for usage for /sys), and for
          creating symlinks, character and block device nodes.

        * New unit file option ControlGroupPersistent= to make cgroups
          persistent, following the mechanisms outlined in
          http://www.freedesktop.org/wiki/Software/systemd/PaxControlGroups

        * Support multiple local RTCs in a sane way

        * No longer monopolize IO when replaying readahead data on
          rotating disks, since we might starve non-file-system IO to
          death, since fanotify() will not see accesses done by blkid,
          or fsck.

        * Do not show kernel threads in systemd-cgls anymore, unless
          requested with new -k switch.

        Contributions from: Dan Horák, Kay Sievers, Lennart
        Poettering, Michal Schmidt

CHANGES WITH 38:

        * This is mostly a test release, but incorporates many
          bugfixes.

        * The git repository moved to:
          git://anongit.freedesktop.org/systemd/systemd
          ssh://git.freedesktop.org/git/systemd/systemd

        * First release with the journal
          http://0pointer.de/blog/projects/the-journal.html

        * The journal replaces both systemd-kmsg-syslogd and
          systemd-stdout-bridge.

        * New sd_pid_get_unit() API call in libsystemd-logind

        * Many systemadm clean-ups

        * Introduce remote-fs-pre.target which is ordered before all
          remote mounts and may be used to start services before all
          remote mounts.

        * Added Mageia support

        * Add bash completion for systemd-loginctl

        * Actively monitor PID file creation for daemons which exit in
          the parent process before having finished writing the PID
          file in the daemon process. Daemons which do this need to be
          fixed (i.e. PID file creation must have finished before the
          parent exits), but we now react a bit more gracefully to them.

        * Add colourful boot output, mimicking the well-known output
          of existing distributions.

        * New option PassCredentials= for socket units, for
          compatibility with a recent kernel ABI breakage.

        * /etc/rc.local is now hooked in via a generator binary, and
          thus will no longer act as synchronization point during
          boot.

        * systemctl list-unit-files now supports --root=.

        * systemd-tmpfiles now understands two new commands: z, Z for
          relabelling files according to the SELinux database. This is
          useful to apply SELinux labels to specific files in /sys,
          among other things.

        * Output of SysV services is now forwarded to both the console
          and the journal by default, not only just the console.

        * New man pages for all APIs from libsystemd-login.

        * The build tree got reorganized and a the build system is a
          lot more modular allowing embedded setups to specifically
          select the components of systemd they are interested in.

        * Support for Linux systems lacking the kernel VT subsystem is
          restored.

        * configure's --with-rootdir= got renamed to
          --with-rootprefix= to follow the naming used by udev and
          kmod

        * Unless specified otherwise we will now install to /usr instead
          of /usr/local by default.

        * Processes with '@' in argv[0][0] are now excluded from the
          final shut-down killing spree, following the logic explained
          in:
          http://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons

        * All processes remaining in a service cgroup when we enter
          the START or START_PRE states are now killed with
          SIGKILL. That means it is no longer possible to spawn
          background processes from ExecStart= lines (which was never
          supported anyway, and bad style).

        * New PropagateReloadTo=/PropagateReloadFrom= options to bind
          reloading of units together.

        Contributions from: Bill Nottingham, Daniel J. Walsh, Dave
        Reisner, Dexter Morgan, Gregs Gregs, Jonathan Nieder, Kay
        Sievers, Lennart Poettering, Michael Biebl, Michal Schmidt,
        Michał Górny, Ran Benita, Thomas Jarosch, Tim Waugh, Tollef
        Fog Heen, Tom Gundersen, Zbigniew Jędrzejewski-Szmek