1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
|
Using UDEV to do Persistent storage device naming
for large numbers of storage devices
3/16/2004
Here are some lessons we learned at OSDL recently on how to use UDEV
(version 021) to do persistent device naming for lots of storage devices.
We used what was available in udev for scsi devices. Here is an outline of
this report:
Background information
a list of resources we needed to get started.
Setup
what we needed to create the right enviroment (kernel, patches,
drivers)
How udev works to assign persistent storage device names
what the documentation didn't tell us.
Performance
A sanity test we ran to compare with and without persistent naming.
BACKGROUND INFORMATION
To get started, here are some references. Review the overview articles so
that the rest of the information makes sense.
Download the latest udev stuff from:
http://www.kernel.org/pub/linux/utils/kernel/hotplug/
mailing list:
linux-hotplug-devel@lists.sourceforge.net
Here is a nice overview article to get started (warning, this is from
summer 2003 so many items indicated as "todo" have been done and
configuration file name references have sometime changed):
http://www.kroah.com/linux/talks/ols_2003_udev_paper/Reprint-Kroah-Hartman-OLS2003.pdf
(also included when you download udev)
More general info (also included in the udev package):
http://kernel.org/pub/linux/utils/kernel/hotplug/udev-FAQ
UDEV version 021 Announcement:
http://marc.theaimsgroup.com/?l=linux-hotplug-devel&m=107827264803336&w=2
"Managing Dynamic Naming":
http://lwn.net/Articles/28897/
If you are a fan of devfs, whatever you do, don't complain until you read
everything you possibly can about udev. This for example:
http://kernel.org/pub/linux/utils/kernel/hotplug/udev_vs_devfs
You will need to create udev.rules to supply consistent names. (See
etc/udev/udev.rules in the download). This article gives you some
background about udev.rules, but avoids describing the "PROGRAM" key which
is needed for our work. Read it for background: writing udev rules
(current as of udev 018)
http://www.reactivated.net/udevrules.php
bitkeeper tree:
bk://kernel.bkbits.net/gregkh/udev
Libsysfs used to get sysfs information):
http://www-124.ibm.com/linux/papers/libsysfs/libsysfs-linuxconfau2004.pdf
UDEV works using the way hotplug events are handled by the kernel.
Several overview articles about hotplug include:
Hotplug events
http://lwn.net/Articles/52621/
Overview of Hotplug
http://linux-hotplug.sourceforge.net/
Gentoo centric install info:
http://webpages.charter.net/decibelshelp/LinuxHelp_UDEVPrimer.html
rpms built against Red Hat FC2-test1 may be available at:
http://kernel.org/pub/linux/utils/kernel/hotplug/udev-021-1.i386.rpm
with the source rpm at:
http://kernel.org/pub/linux/utils/kernel/hotplug/udev-021-1.src.rpm
SETUP
Here is a brief checklist of what you need on your system for this to
work:
Kernel must be a 2.6 kernel
Must use CONFIG_HOTPLUG kernel config option, since the solution is based
on hotplug capabilities.
To test more than 256 scsi devices you need a patch to the scsi driver to
support that many (available from IBM or SuSE). To see the patch we used,
see this link:
http://developer.osdl.org/maryedie/DCL/PSDN/lotsofdisks.patch
Your storage device must support (via the driver) a unique identifier for
persistent device naming. (Adaptec RAID device does not, for example.)
Your device driver must support sysfs (new in 2.6 kernel). This is already
done for scsi devices and most if not all block devices.
A program (scsi_id) exists in the udev download (extras/scsi_id/scsi_id.c)
for scsi devices. It can read the identifier and is needed for persistent
naming.
HOW UDEV WORKS TO ASSIGN PERSISTENT NAMES:
There are three places where device information is stored that udev
uses:
(1) /sys maintained by sysfs
(2) /etc/udev/udev.rules - where you can store the identifier to NAME
mapping information.
(3) The udevdb, that keeps track the valid system configuration.
It is constructed at boot time and updated with configuration changes.
The persistent names are kept (at least this is one way to do it) in
udev.rules (uuid and NAME), one entry per device. If you want to initially
give your 1000 disk devices a default name and then make sure those names
are preserved, here is how :
Start with no special entry in udev.rules when do you an initial boot of
your system with disks in place. Udev will assign default names (there
are ways to control what you want for default too).
Once the names are assigned, use a script supplied for scsi devices -
udev-021/extras/scsi_id/gen_scsi_id_udev_rules.sh to generate the lines
needed for udev.rules, one per device. Each line indicates the identifier
and the NAME it was assigned. You could optionally create this manually if
you prefer other names .
[example entries in udev.rules for scsi disks]
BUS="scsi", PROGRAM="scsi_id", RESULT="<uuid1>",NAME="<name1>"
BUS="scsi", RESULT="<uuid2>",NAME="<name2>"
...
BUS="scsi", RESULT="<uuid1000>",NAME="<name1000>"
(The actual file we used is the file udev.rules_1000_scsi_debug in this
directory )
Upon reboot, for each device a hotplug event occurs. The udev.rules file
is scanned looking for the device type (BUS) in this case for "scsi". The
first entry generated by the above program references a PROGRAM in the key
field (scsi_id) which is called to probe the device and determine the
unique identifier. sysfs is used to determine the major/minor number for
the device. The result of the program execution (the uuid) is compared
with the RESULT entry in the same udev.rules line.
- If it matches, then the NAME entered on this line is used. The uuid and
major/minor number is saved in the udevdb (newly recreated upon boot).
That device is created in /udev (the target directory name is configurable)
with the assigned NAME.
- If it doesn't match, the RESULT (uuid) is preserved for use on the next
udev.rules line as long as the bus type (scsi) is the same. So the
result (the uuid) is compared on the next line, and the next until a
match occurs.
- If no match occurs, the device will be assigned a default name.
- The udevdb is updated with the resulting name assignment.
Thus if the uuid and names are enumerated, they will be found, assigned,
and are therefore permanent.
If the device is removed from a live system, a hotplug event occurs, and it
is removed from udevdb and the /udev entry disappears.
If it is re-inserted at a new location, the udev.rules file is scanned as
above. The rule matches again against the uuid, the name in udev.rules
is applied again and the /udev name re-appears.
PERFORMANCE
Now the question becomes, how much longer does it take to scan the
udev.rules table once there are 1000 entries?
To test this, we created 1000 "scsi " devices using the scsi debug device
driver supplied in the kernel. When this device driver is loaded you can
specify how many fake scsi devices to create. There is no real I/O
involved but it does respond to some scsi commands. It simulates the uuid
by using the device number assigned when the device is created.
Then we auto-generated entries into udev.rules with
gen_scsi_id_udev_rules.sh. We then removed the devices and reassigned them
to simulate a reboot. The delta between assigning defaults and assigning
the names enumerated in the udev.rules file was 7 seconds (that's for 1000
drives).
Scripts utilized the feature (described above) that saves the "RESULT" key
after one scsi-id program call for later reference with other udev.rules
entries (so only have one PROGRAM key is the moral of the story). If you
repeated the PROGRAM key, you would unnecessarily call the program up to
999 times!
The script that creates udev.rules did not work for 1000 drives (the input
line is too long). We determined that a patch for this already existed but
had not yet been checked in.
|
