path: root/etc/udev/slackware/udev.rules

# /etc/udev/udev.rules:  device naming rules for udev
#
# There are a number of modifiers that are allowed to be used in some of the
# fields.  See the udev man page for a full description of them.
#
# This rules file is a mix of 10.2 Slackware udev.rules file and some
# rules from the udev examples. 
#

# wait for sysfs
ACTION=="add", DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
ACTION=="add", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
ACTION=="add", SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"

# all block devices
SUBSYSTEM=="block", GROUP="disk"

# permissions for IDE CD devices (without symbolic link creation)
BUS=="ide", KERNEL=="*[!0-9]", ENV{PHYSDEVDRIVER}=="ide-cdrom", NAME="%k", GROUP="cdrom", MODE="0660"

# permissions for IDE CD devices (with symbolic link creation)
# THIS RULE COMMENTED OUT BY DEFAULT:  read /lib/udev/rc.optical-symlinks for more information...
#BUS=="ide", KERNEL=="*[!0-9]", ENV{PHYSDEVDRIVER}=="ide-cdrom", NAME="%k", GROUP="cdrom", MODE="0660", RUN+="/lib/udev/cdrom-symlinks.sh %k"

# permissions for IDE floppy devices
BUS=="ide", KERNEL=="*[!0-9]", ENV{PHYSDEVDRIVER}=="ide-floppy*", NAME="%k", GROUP="floppy", MODE="0660"

# permissions for SCSI cd/sg/tape devices
BUS=="scsi", KERNEL=="s[grt][0-9]*", SYSFS{type}=="5", NAME="%k", GROUP="cdrom", MODE="0660"

# load modules to scsi disks, if they aren't in kernel
SUBSYSTEM=="scsi_device", ACTION=="add", SYSFS{device/type}=="0|7|14", RUN+="/sbin/modprobe sd_mod"
SUBSYSTEM=="scsi_device", ACTION=="add", SYSFS{device/type}=="1", SYSFS{device/vendor}=="On[sS]tream", RUN+="/sbin/modprobe osst"
SUBSYSTEM=="scsi_device", ACTION=="add", SYSFS{device/type}=="1", RUN+="/sbin/modprobe st"
SUBSYSTEM=="scsi_device", ACTION=="add", SYSFS{device/type}=="[45]", RUN+="/sbin/modprobe sr_mod"
SUBSYSTEM=="scsi_device", ACTION=="add", RUN+="/sbin/modprobe sg"

# disk devices
KERNEL=="sd*",		NAME="%k", GROUP="disk"
KERNEL=="dasd*",	NAME="%k", GROUP="disk"
KERNEL=="ataraid*",	NAME="%k", GROUP="disk"

# persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}

ACTION!="add", GOTO="persistent_end"
SUBSYSTEM!="block", GOTO="persistent_end"

# skip rules for inappropriate block devices
KERNEL=="ram*|loop*|fd*|nbd*", GOTO="persistent_end"

# never access removable ide devices, the drivers are causing event loops on open()
BUS=="ide", DRIVER!="ide-cdrom", SYSFS{removable}=="1", GOTO="persistent_end"

# by-id (hardware serial number)
KERNEL=="hd*[!0-9]", IMPORT{program}="/lib/udev/ata_id --export $tempnode"
KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}"
KERNEL=="hd*[0-9]", IMPORT{parent}=="ID_*", SYMLINK+="disk/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}-part%n"

KERNEL=="sd*[!0-9]|sr*", SYSFS{ieee1394_id}=="*", ENV{ID_SERIAL}="$sysfs{ieee1394_id}", ENV{ID_BUS}="ieee1394"
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}=="", IMPORT{program}="/lib/udev/usb_id -x"
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}=="", IMPORT{program}="/lib/udev/scsi_id -g -x -s %p -d $tempnode"
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}=="", IMPORT{program}="/lib/udev/scsi_id -g -x -a -s %p -d $tempnode"
KERNEL=="dasd*[!0-9]", IMPORT{program}="/lib/udev/dasd_id --export $tempnode"
KERNEL=="sd*[!0-9]|sr*|dasd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"

# for partitions import parent information
KERNEL=="sd*[0-9]|dasd*[0-9]", IMPORT{parent}=="ID_*"
KERNEL=="sd*[0-9]|dasd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"

# by-path (shortest physical path)
KERNEL=="*[!0-9]|sr*", ENV{ID_TYPE}=="?*", IMPORT{program}="/lib/udev/path_id %p", SYMLINK+="disk/by-path/$env{ID_PATH}"
KERNEL=="st*", ENV{ID_TYPE}=="?*", IMPORT{program}="/lib/udev/path_id %p", SYMLINK+="tape/by-path/$env{ID_PATH}"
KERNEL=="sr*|st*", GOTO="persistent_end"
KERNEL=="*[0-9]", IMPORT{parent}=="ID_*"
KERNEL=="*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"

# by-label/by-uuid (filesystem properties)
KERNEL=="*[!0-9]", SYSFS{removable}=="1", GOTO="persistent_end"
IMPORT{program}="/lib/udev/vol_id --export $tempnode"
ENV{ID_FS_UUID}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID}"
ENV{ID_FS_LABEL_SAFE}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_SAFE}"

# BIOS Enhanced Disk Device
KERNEL=="*[!0-9]", IMPORT{program}="/lib/udev/edd_id --export $tempnode"
KERNEL=="*[!0-9]", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}"
KERNEL=="*[0-9]", ENV{ID_EDD}=="?*", SYMLINK+="disk/by-id/edd-$env{ID_EDD}-part%n"

# LVM2 dmsetup
KERNEL=="dm-[0-9]*", ACTION=="add", PROGRAM="/sbin/dmsetup info -c --noopencount --noheadings -o name -j %M -m %m", SYMLINK+="disk/by-name/%c"

LABEL="persistent_end"

# ALSA devices
SUBSYSTEM=="sound", 		GROUP="audio"
SUBSYSTEM=="snd", 		GROUP="audio"
KERNEL=="controlC[0-9]*",	NAME="snd/%k", MODE="0666"
KERNEL=="hw[CD0-9]*",		NAME="snd/%k", MODE="0662"
KERNEL=="pcm[CD0-9]*c",		NAME="snd/%k", MODE="0662"
KERNEL=="pcm[CD0-9]*p",		NAME="snd/%k", MODE="0666"
KERNEL=="midiC[D0-9]*",		NAME="snd/%k", MODE="0666"
KERNEL=="timer",		NAME="snd/%k", MODE="0666"
KERNEL=="seq",			NAME="snd/%k", MODE="0666"

# IEEE1394 raw devices (often used for video)
KERNEL=="raw1394", NAME="%k", GROUP="video"
KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"

# capi devices
KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20"
KERNEL=="capi*",	NAME="capi/%n"

# cpu devices
KERNEL=="cpu[0-9]*",	NAME="cpu/%n/cpuid"
KERNEL=="msr[0-9]*",	NAME="cpu/%n/msr"
KERNEL=="microcode",	NAME="cpu/microcode"

# dm devices (ignore them)
KERNEL=="dm-[0-9]*",	NAME=""
# create a symlink named after the device map name
# note devmap_name comes with extras/multipath
#KERNEL=="dm-[0-9]*",	PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c"
KERNEL=="device-mapper",	NAME="mapper/control"


# floppy devices
KERNEL=="fd[0-9]*", NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy", PROGRAM="/lib/udev/floppy-extra-devs.sh %k %b %n"

# i2c devices
KERNEL=="i2c-[0-9]*",	NAME="i2c/%n", SYMLINK+="%k"

# input devices
KERNEL=="mice",		NAME="input/%k", MODE="0644", SYMLINK+="mouse"
KERNEL=="mouse*",	NAME="input/%k", MODE="0644"
KERNEL=="event*",	NAME="input/%k", MODE="0640"
KERNEL=="js*",		NAME="input/%k", MODE="664"
KERNEL=="ts*",		NAME="input/%k", MODE="0600"
SUBSYSTEM=="input[0-9]*", RUN+="/lib/udev/input_device.sh"
KERNEL=="input[0-9]*", ACTION=="add", ENV{ABS}=="[1-9]*", RUN+="/sbin/modprobe joydev"

# loop devices
KERNEL=="loop[0-9]*",	NAME="loop/%n", SYMLINK+="%k", GROUP="disk"

# md block devices
KERNEL=="md[0-9]*",	NAME="md/%n", SYMLINK+="%k", GROUP="disk"

# aoe char devices,
SUBSYSTEM=="aoe", KERNEL=="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="err",	NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM=="aoe", KERNEL=="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"

# netlink devices
KERNEL=="route",	NAME="netlink/%k"
KERNEL=="skip",		NAME="netlink/%k"
KERNEL=="usersock",	NAME="netlink/%k"
KERNEL=="fwmonitor",	NAME="netlink/%k"
KERNEL=="tcpdiag",	NAME="netlink/%k"
KERNEL=="nflog",	NAME="netlink/%k"
KERNEL=="xfrm",		NAME="netlink/%k"
KERNEL=="arpd",		NAME="netlink/%k"
KERNEL=="route6",	NAME="netlink/%k"
KERNEL=="ip6_fw",	NAME="netlink/%k"
KERNEL=="dnrtmsg",	NAME="netlink/%k"
KERNEL=="tap*",		NAME="netlink/%k"

# ramdisk devices
KERNEL=="ram[0-9]*",	NAME="rd/%n", SYMLINK+="%k"

# raw devices
KERNEL=="raw[0-9]*",	NAME="raw/%k", GROUP="disk"
KERNEL=="ram*",		NAME="%k", GROUP="disk"

# sound devices
KERNEL=="adsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="adsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="audio",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="audio[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="dsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="dsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="mixer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="mixer[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="sequencer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"
KERNEL=="sequencer[0-9]*",	NAME="sound/%k", SYMLINK+="%k", GROUP="audio", MODE="0662"

# tty devices
KERNEL=="console",	NAME="%k", GROUP="tty", MODE="0600"
KERNEL=="tty",		NAME="%k", GROUP="tty", MODE="0666"
KERNEL=="tty[0-9]*",	NAME="vc/%n",  SYMLINK+="%k", GROUP="tty"
KERNEL=="ttyS[0-9]*",	NAME="tts/%n", SYMLINK+="%k", GROUP="tty"
KERNEL=="ttyUSB[0-9]*",	NAME="tts/USB%n", GROUP="tty", MODE="0660"
KERNEL=="ippp0",	NAME="%k", GROUP="tty"
KERNEL=="isdn*",	NAME="%k", GROUP="tty"
KERNEL=="dcbri*",	NAME="%k", GROUP="tty"
KERNEL=="ircomm*",	NAME="%k", GROUP="tty"

# pty devices
KERNEL=="ptmx",			NAME="%k", GROUP="tty", MODE="0666"
KERNEL=="pty[p-za-e][0-9a-f]*",	NAME="pty/m%m", SYMLINK+="%k", GROUP="tty"
KERNEL=="tty[p-za-e][0-9a-f]*",	NAME="pty/s%m", SYMLINK+="%k", GROUP="tty"

# vc devices
KERNEL=="vcs",		NAME="vcc/0",	SYMLINK+="%k", GROUP="tty"
KERNEL=="vcs[0-9]*",	NAME="vcc/%n",	SYMLINK+="%k", GROUP="tty"
KERNEL=="vcsa",		NAME="vcc/a0",	SYMLINK+="%k", GROUP="tty"
KERNEL=="vcsa[0-9]*",	NAME="vcc/a%n",	SYMLINK+="%k", GROUP="tty"

# memory devices
KERNEL=="random",	NAME="%k", MODE="0664"
KERNEL=="urandom",	NAME="%k", MODE="0664"
KERNEL=="mem",		NAME="%k", GROUP="kmem", MODE="0640"
KERNEL=="kmem",		NAME="%k", GROUP="kmem", MODE="0640"
KERNEL=="port",		NAME="%k", GROUP="kmem", MODE="0640"
KERNEL=="nvram",	NAME="%k", GROUP="kmem", MODE="600"
KERNEL=="full",		NAME="%k", MODE="0666"
KERNEL=="null",		NAME="%k", MODE="0666"
KERNEL=="zero",		NAME="%k", MODE="0666"

# misc devices
KERNEL=="agpgart",	NAME="misc/%k", SYMLINK+="%k"
KERNEL=="psaux",	NAME="misc/%k", SYMLINK+="%k"
KERNEL=="rtc",		NAME="misc/%k", SYMLINK+="%k", MODE="0664"
KERNEL=="uinput",	NAME="misc/%k", SYMLINK+="%k"
KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"

# usb devices
KERNEL=="hiddev*",		NAME="usb/%k"
KERNEL=="auer*",		NAME="usb/%k"
KERNEL=="legousbtower*",	NAME="usb/%k"
KERNEL=="dabusb*",		NAME="usb/%k"

# fb devices
KERNEL=="fb[0-9]*",	NAME="fb/%n", SYMLINK+="%k", GROUP="video"

# DRI devices
KERNEL=="card*",	NAME="dri/card%n", GROUP="video"
KERNEL=="nvidia*",	NAME="%k", GROUP="video"
KERNEL=="3dfx*",	NAME="%k", GROUP="video"

# v4l devices
KERNEL=="video[0-9]*",	NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
KERNEL=="radio[0-9]*",	NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
KERNEL=="vbi[0-9]*",	NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
KERNEL=="vtx[0-9]*",	NAME="v4l/vtx%n", GROUP="video"

# dvb devices
SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'X=%k; X=$${X#dvb}; A=$${X%%%%.*}; D=$${X#*.}; echo dvb/adapter$$A/$$D'", NAME="%c", GROUP="video"

# Asterix Zaptel devices
KERNEL=="zapctl",	NAME="zap/ctl"
KERNEL=="zaptimer",	NAME="zap/timer"
KERNEL=="zapchannel",	NAME="zap/channel"
KERNEL=="zappseudo",	NAME="zap/pseudo"
KERNEL=="zap[0-9]*",	NAME="zap/%n"

# pilot/palm devices
KERNEL=="pilot",	NAME="%k", GROUP="uucp"

# jaz devices
KERNEL=="jaz*",		NAME="%k", GROUP="disk"

# zip devices
KERNEL=="pocketzip*",	NAME="%k", GROUP="disk"
KERNEL=="zip*",		NAME="%k", GROUP="disk"

# ls120 devices
KERNEL=="ls120",	NAME="%k", GROUP="disk"

# lp devices
KERNEL=="irlpt",	NAME="%k", GROUP="lp", MODE="0664"
SUBSYSTEM=="usb", KERNEL=="lp*", NAME="usb/%k", SYMLINK+="usb%k", GROUP="lp", MODE="0664"
SUBSYSTEM=="printer", KERNEL=="lp*", NAME="%k", GROUP="lp", MODE="0664"
KERNEL=="parport*",	NAME="%k", GROUP="lp", MODE="0664"

# tape devices
KERNEL=="ht*",		NAME="%k"
KERNEL=="nht*",		NAME="%k"
KERNEL=="pt*",		NAME="%k"
KERNEL=="npt*",		NAME="%k"
KERNEL=="st*",		NAME="%k"
KERNEL=="nst*",		NAME="%k"
KERNEL=="osst*",	NAME="%k"
KERNEL=="nosst*",	NAME="%k"

# diskonkey devices
KERNEL=="diskonkey*",	NAME="%k", GROUP="disk"

# rem_ide devices
KERNEL=="microdrive*",	NAME="%k", GROUP="disk"

# kbd devices
KERNEL=="kbd",		NAME="%k", MODE="0664"

# Sony Vaio Jogdial sonypi device
KERNEL=="sonypi",	NAME="%k", MODE="0666"

# packet devices
KERNEL=="pktcdvd",		NAME="pktcdvd/control", GROUP="cdrom", MODE="0660"
KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/pktcdvd%n", GROUP="cdrom", MODE="0660"

# infiniband devices
KERNEL=="umad*",	NAME="infiniband/%k"
KERNEL=="issm*", NAME="infiniband/%k"

# PnP
SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", \
        RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'"

# firewire
SUBSYSTEM=="ieee1394", ENV{MODALIAS}!="?*", IMPORT{program}="modalias_ieee1394"

#  libusb device access
DEVPATH=="/module/usbcore", ACTION=="add", \
              RUN+="/bin/sh -c 'sleep 1; /bin/mount none -t usbfs /proc/bus/usb -o devmode=0666,devgid=10'"
SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'X=%k X=$${X#usbdev}; B=$${X%%%%.*}; D=$${X#*.}; echo bus/usb/$$B/$$D'", SYMLINK+="%c"

# firmware loader
SUBSYSTEM=="firmware", ACTION=="add", RUN+="/lib/udev/firmware_helper"

# load module
ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"

# PCMCIA devices:
#
# Very few CIS firmware entries (which we use for matching)
# are so broken that we need to read out random bytes of it
# instead of the manufactor, card or product ID. Then the
# matching is done in userspace.
ACTION=="add", SUBSYSTEM=="pcmcia", ENV{MODALIAS}=="?*", \
		RUN+="/sbin/pcmcia-check-broken-cis"

# However, the "weak" matching by func_id is only allowed _after_ modprobe
# returns, so that "strong" matches have a higher priority.
ACTION=="add", SUBSYSTEM=="pcmcia", ENV{MODALIAS}=="?*", \
		RUN+="/bin/sh -c 'echo 1 > /sys/$DEVPATH/allow_func_id_match'"

# PCMCIA sockets:
#
# modprobe the pcmcia bus module so that 16-bit PCMCIA devices work
ACTION=="add", SUBSYSTEM=="pcmcia_socket", RUN+="/sbin/modprobe pcmcia"

# if this is a PCMCIA socket which needs a resource database,
# pcmcia-socket-startup sets it up
ACTION=="add", SUBSYSTEM=="pcmcia_socket", RUN+="/sbin/pcmcia-socket-startup"

# network devices
KERNEL=="tun", NAME="net/%k"
SUBSYSTEM=="net", ACTION=="add", RUN+="/lib/udev/nethelper.sh $env{INTERFACE} start"
SUBSYSTEM=="net", ACTION=="remove", RUN+="/lib/udev/nethelper.sh $env{INTERFACE} stop"

# if you use HAL, try this:
# send all events to HAL
#RUN+="socket:/org/freedesktop/hal/udev_event"

# catch the event in udevmonitor
RUN+="socket:/org/kernel/udev/monitor"