path: root/man/journald.conf.xml

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="journald.conf"
    xmlns:xi="http://www.w3.org/2001/XInclude">
  <refentryinfo>
    <title>journald.conf</title>
    <productname>systemd</productname>

    <authorgroup>
      <author>
        <contrib>Developer</contrib>
        <firstname>Lennart</firstname>
        <surname>Poettering</surname>
        <email>lennart@poettering.net</email>
      </author>
    </authorgroup>
  </refentryinfo>

  <refmeta>
    <refentrytitle>journald.conf</refentrytitle>
    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>journald.conf</refname>
    <refname>journald.conf.d</refname>
    <refpurpose>Journal service configuration files</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <para><filename>/etc/systemd/journald.conf</filename></para>
    <para><filename>/etc/systemd/journald.conf.d/*.conf</filename></para>
    <para><filename>/run/systemd/journald.conf.d/*.conf</filename></para>
    <para><filename>/usr/lib/systemd/journald.conf.d/*.conf</filename></para>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>These files configure various parameters of the systemd
    journal service,
    <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>

  </refsect1>

  <xi:include href="standard-conf.xml" xpointer="main-conf" />

  <refsect1>
    <title>Options</title>

    <para>All options are configured in the
    <literal>[Journal]</literal> section:</para>

    <variablelist>

      <varlistentry>
        <term><varname>Storage=</varname></term>

        <listitem><para>Controls where to store journal data. One of
        <literal>volatile</literal>,
        <literal>persistent</literal>,
        <literal>auto</literal> and
        <literal>none</literal>. If
        <literal>volatile</literal>, journal
        log data will be stored only in memory, i.e. below the
        <filename>/run/log/journal</filename> hierarchy (which is
        created if needed). If <literal>persistent</literal>, data
        will be stored preferably on disk, i.e. below the
        <filename>/var/log/journal</filename> hierarchy (which is
        created if needed), with a fallback to
        <filename>/run/log/journal</filename> (which is created if
        needed), during early boot and if the disk is not writable.
        <literal>auto</literal> is similar to
        <literal>persistent</literal> but the directory
        <filename>/var/log/journal</filename> is not created if
        needed, so that its existence controls where log data goes.
        <literal>none</literal> turns off all storage, all log data
        received will be dropped. Forwarding to other targets, such as
        the console, the kernel log buffer, or a syslog socket will
        still work however. Defaults to
        <literal>auto</literal>.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>Compress=</varname></term>

        <listitem><para>Takes a boolean value. If enabled (the
        default), data objects that shall be stored in the journal and
        are larger than a certain threshold are compressed before they
        are written to the file system.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>Seal=</varname></term>

        <listitem><para>Takes a boolean value. If enabled (the
        default), and a sealing key is available (as created by
        <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
        <option>--setup-keys</option> command), Forward Secure Sealing
        (FSS) for all persistent journal files is enabled. FSS is
        based on <ulink
        url="https://eprint.iacr.org/2013/397">Seekable Sequential Key
        Generators</ulink> by G. A. Marson and B. Poettering
        (doi:10.1007/978-3-642-40203-6_7) and may be used to protect
        journal files from unnoticed alteration.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>SplitMode=</varname></term>

        <listitem><para>Controls whether to split up journal files per user. Split-up journal files are primarily
        useful for access control: on UNIX/Linux access control is managed per file, and the journal daemon will assign
        users read access to their journal files. This setting takes one of <literal>uid</literal>,
        <literal>login</literal> or <literal>none</literal>. If <literal>uid</literal>, all regular users will get each
        their own journal files regardless of whether their processes possess login sessions or not, however system
        users will log into the system journal. If <literal>login</literal>, actually logged-in users will get each
        their own journal files, but users without login session and system users will log into the system
        journal. Note that in this mode, user code running outside of any login session will log into the system log
        instead of the split-out user logs. Most importantly, this means that information about core dumps of user
        processes collected via the
        <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry> subsystem
        will end up in the system logs instead of the user logs, and thus not be accessible to the owning users. If
        <literal>none</literal>, journal files are not split up by user and all messages are instead stored in the
        single system journal. In this mode unprivileged users generally do not have access to their own log data. Note
        that splitting up journal files by user is only available for journals stored persistently. If journals are
        stored on volatile storage (see above), only a single journal file for all user IDs is kept. Defaults to
        <literal>uid</literal>.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>RateLimitIntervalSec=</varname></term>
        <term><varname>RateLimitBurst=</varname></term>

        <listitem><para>Configures the rate limiting that is applied
        to all messages generated on the system. If, in the time
        interval defined by <varname>RateLimitIntervalSec=</varname>,
        more messages than specified in
        <varname>RateLimitBurst=</varname> are logged by a service,
        all further messages within the interval are dropped until the
        interval is over. A message about the number of dropped
        messages is generated. This rate limiting is applied
        per-service, so that two services which log do not interfere
        with each other's limits. Defaults to 1000 messages in 30s.
        The time specification for
        <varname>RateLimitIntervalSec=</varname> may be specified in the
        following units: <literal>s</literal>, <literal>min</literal>,
        <literal>h</literal>, <literal>ms</literal>,
        <literal>us</literal>. To turn off any kind of rate limiting,
        set either value to 0.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>SystemMaxUse=</varname></term>
        <term><varname>SystemKeepFree=</varname></term>
        <term><varname>SystemMaxFileSize=</varname></term>
        <term><varname>SystemMaxFiles=</varname></term>
        <term><varname>RuntimeMaxUse=</varname></term>
        <term><varname>RuntimeKeepFree=</varname></term>
        <term><varname>RuntimeMaxFileSize=</varname></term>
        <term><varname>RuntimeMaxFiles=</varname></term>

        <listitem><para>Enforce size limits on the journal files
        stored. The options prefixed with <literal>System</literal>
        apply to the journal files when stored on a persistent file
        system, more specifically
        <filename>/var/log/journal</filename>. The options prefixed
        with <literal>Runtime</literal> apply to the journal files
        when stored on a volatile in-memory file system, more
        specifically <filename>/run/log/journal</filename>. The former
        is used only when <filename>/var</filename> is mounted,
        writable, and the directory
        <filename>/var/log/journal</filename> exists. Otherwise, only
        the latter applies. Note that this means that during early
        boot and if the administrator disabled persistent logging,
        only the latter options apply, while the former apply if
        persistent logging is enabled and the system is fully booted
        up. <command>journalctl</command> and
        <command>systemd-journald</command> ignore all files with
        names not ending with <literal>.journal</literal> or
        <literal>.journal~</literal>, so only such files, located in
        the appropriate directories, are taken into account when
        calculating current disk usage.</para>

        <para><varname>SystemMaxUse=</varname> and
        <varname>RuntimeMaxUse=</varname> control how much disk space
        the journal may use up at most.
        <varname>SystemKeepFree=</varname> and
        <varname>RuntimeKeepFree=</varname> control how much disk
        space systemd-journald shall leave free for other uses.
        <command>systemd-journald</command> will respect both limits
        and use the smaller of the two values.</para>

        <para>The first pair defaults to 10% and the second to 15% of
        the size of the respective file system, but each value is
        capped to 4G. If the file system is nearly full and either
        <varname>SystemKeepFree=</varname> or
        <varname>RuntimeKeepFree=</varname> are violated when
        systemd-journald is started, the limit will be raised to the
        percentage that is actually free. This means that if there was
        enough free space before and journal files were created, and
        subsequently something else causes the file system to fill up,
        journald will stop using more space, but it will not be
        removing existing files to reduce the footprint again,
        either.</para>

        <para><varname>SystemMaxFileSize=</varname> and
        <varname>RuntimeMaxFileSize=</varname> control how large
        individual journal files may grow at most. This influences
        the granularity in which disk space is made available through
        rotation, i.e. deletion of historic data. Defaults to one
        eighth of the values configured with
        <varname>SystemMaxUse=</varname> and
        <varname>RuntimeMaxUse=</varname>, so that usually seven
        rotated journal files are kept as history.</para>

        <para>Specify values in bytes or use K, M, G, T, P, E as
        units for the specified sizes (equal to 1024, 1024², ... bytes).
        Note that size limits are enforced synchronously when journal
        files are extended, and no explicit rotation step triggered by
        time is needed.</para>

        <para><varname>SystemMaxFiles=</varname> and
        <varname>RuntimeMaxFiles=</varname> control how many
        individual journal files to keep at most. Note that only
        archived files are deleted to reduce the number of files until
        this limit is reached; active files will stay around. This
        means that, in effect, there might still be more journal files
        around in total than this limit after a vacuuming operation is
        complete. This setting defaults to 100.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>MaxFileSec=</varname></term>

        <listitem><para>The maximum time to store entries in a single
        journal file before rotating to the next one. Normally,
        time-based rotation should not be required as size-based
        rotation with options such as
        <varname>SystemMaxFileSize=</varname> should be sufficient to
        ensure that journal files do not grow without bounds. However,
        to ensure that not too much data is lost at once when old
        journal files are deleted, it might make sense to change this
        value from the default of one month. Set to 0 to turn off this
        feature. This setting takes time values which may be suffixed
        with the units <literal>year</literal>,
        <literal>month</literal>, <literal>week</literal>,
        <literal>day</literal>, <literal>h</literal> or
        <literal>m</literal> to override the default time unit of
        seconds.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>MaxRetentionSec=</varname></term>

        <listitem><para>The maximum time to store journal entries.
        This controls whether journal files containing entries older
        then the specified time span are deleted. Normally, time-based
        deletion of old journal files should not be required as
        size-based deletion with options such as
        <varname>SystemMaxUse=</varname> should be sufficient to
        ensure that journal files do not grow without bounds. However,
        to enforce data retention policies, it might make sense to
        change this value from the default of 0 (which turns off this
        feature). This setting also takes time values which may be
        suffixed with the units <literal>year</literal>,
        <literal>month</literal>, <literal>week</literal>,
        <literal>day</literal>, <literal>h</literal> or <literal>
        m</literal> to override the default time unit of
        seconds.</para></listitem>
      </varlistentry>


      <varlistentry>
        <term><varname>SyncIntervalSec=</varname></term>

        <listitem><para>The timeout before synchronizing journal files
        to disk. After syncing, journal files are placed in the
        OFFLINE state. Note that syncing is unconditionally done
        immediately after a log message of priority CRIT, ALERT or
        EMERG has been logged. This setting hence applies only to
        messages of the levels ERR, WARNING, NOTICE, INFO, DEBUG. The
        default timeout is 5 minutes. </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>ForwardToSyslog=</varname></term>
        <term><varname>ForwardToKMsg=</varname></term>
        <term><varname>ForwardToConsole=</varname></term>
        <term><varname>ForwardToWall=</varname></term>

        <listitem><para>Control whether log messages received by the
        journal daemon shall be forwarded to a traditional syslog
        daemon, to the kernel log buffer (kmsg), to the system
        console, or sent as wall messages to all logged-in users.
        These options take boolean arguments. If forwarding to syslog
        is enabled but nothing reads messages from the socket,
        forwarding to syslog has no effect. By default, only
        forwarding to wall is enabled. These settings may be
        overridden at boot time with the kernel command line options
        <literal>systemd.journald.forward_to_syslog=</literal>,
        <literal>systemd.journald.forward_to_kmsg=</literal>,
        <literal>systemd.journald.forward_to_console=</literal>, and
        <literal>systemd.journald.forward_to_wall=</literal>. When
        forwarding to the console, the TTY to log to can be changed
        with <varname>TTYPath=</varname>, described
        below.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>MaxLevelStore=</varname></term>
        <term><varname>MaxLevelSyslog=</varname></term>
        <term><varname>MaxLevelKMsg=</varname></term>
        <term><varname>MaxLevelConsole=</varname></term>
        <term><varname>MaxLevelWall=</varname></term>

        <listitem><para>Controls the maximum log level of messages
        that are stored on disk, forwarded to syslog, kmsg, the
        console or wall (if that is enabled, see above). As argument,
        takes one of
        <literal>emerg</literal>,
        <literal>alert</literal>,
        <literal>crit</literal>,
        <literal>err</literal>,
        <literal>warning</literal>,
        <literal>notice</literal>,
        <literal>info</literal>,
        <literal>debug</literal>,
        or integer values in the range of 0–7 (corresponding to the
        same levels). Messages equal or below the log level specified
        are stored/forwarded, messages above are dropped. Defaults to
        <literal>debug</literal> for <varname>MaxLevelStore=</varname>
        and <varname>MaxLevelSyslog=</varname>, to ensure that the all
        messages are written to disk and forwarded to syslog. Defaults
        to
        <literal>notice</literal> for <varname>MaxLevelKMsg=</varname>,
        <literal>info</literal> for <varname>MaxLevelConsole=</varname>,
        and <literal>emerg</literal> for
        <varname>MaxLevelWall=</varname>.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>TTYPath=</varname></term>

        <listitem><para>Change the console TTY to use if
        <varname>ForwardToConsole=yes</varname> is used. Defaults to
        <filename>/dev/console</filename>.</para></listitem>
      </varlistentry>

    </variablelist>

  </refsect1>

  <refsect1>
    <title>Forwarding to traditional syslog daemons</title>

    <para>
      Journal events can be transferred to a different logging daemon
      in two different ways. With the first method, messages are
      immediately forwarded to a socket
      (<filename>/run/systemd/journal/syslog</filename>), where the
      traditional syslog daemon can read them. This method is
      controlled by the <varname>ForwardToSyslog=</varname> option. With a
      second method, a syslog daemon behaves like a normal journal
      client, and reads messages from the journal files, similarly to
      <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
      With this, messages do not have to be read immediately,
      which allows a logging daemon which is only started late in boot
      to access all messages since the start of the system. In
      addition, full structured meta-data is available to it. This
      method of course is available only if the messages are stored in
      a journal file at all. So it will not work if
      <varname>Storage=none</varname> is set. It should be noted that
      usually the <emphasis>second</emphasis> method is used by syslog
      daemons, so the <varname>Storage=</varname> option, and not the
      <varname>ForwardToSyslog=</varname> option, is relevant for them.
    </para>
  </refsect1>

  <refsect1>
      <title>See Also</title>
      <para>
        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
      </para>
  </refsect1>

</refentry>