4 files changed, 0 insertions, 168 deletions
diff --git a/community-testing/drbd/01-remove-old-sanity-check.diff b/community-testing/drbd/01-remove-old-sanity-check.diff
deleted file mode 100644
index 04edb7571..000000000
--- a/community-testing/drbd/01-remove-old-sanity-check.diff
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Lars Ellenberg <lars.ellenberg@linbit.com>
-Date: Thu, 3 Nov 2011 09:40:43 +0000 (+0100)
-Subject: build: remove old sanity check to allow build against linux 3.1
-X-Git-Url: http://git.drbd.org/gitweb.cgi?p=drbd-8.3.git;a=commitdiff_plain;h=790c26b09519b9e02b3a7cf7897fb17c2ae339bf
-
-build: remove old sanity check to allow build against linux 3.1
----
-
-diff --git a/drbd/Makefile b/drbd/Makefile
-index 0985340..7a09603 100644
---- a/drbd/Makefile
-+++ b/drbd/Makefile
-@@ -90,11 +90,6 @@ else
-     endif
-   endif
- 
--  KDIR_Makefile_PATCHLEVEL = $(shell test -e $(KDIR)/Makefile && grep "^PATCHLEVEL = " $(KDIR)/Makefile | cut -d " " -f 3)
--  ifneq ($(findstring $(KDIR_Makefile_PATCHLEVEL),12345),)
--    $(error "won't compile with this kernel version")
--  endif
--
-   .PHONY: drbd.o default all greeting clean kbuild install dep tags
- 
-   drbd.o: greeting kbuild
diff --git a/community-testing/drbd/PKGBUILD b/community-testing/drbd/PKGBUILD
deleted file mode 100644
index 5afc6db41..000000000
--- a/community-testing/drbd/PKGBUILD
+++ /dev/null
@@ -1,67 +0,0 @@
-# $Id: PKGBUILD 75398 2012-08-21 20:52:40Z seblu $
-# Maintainer: Sébastien Luttringer <seblu@aur.archlinux.org>
-
-pkgname=drbd
-pkgver=8.3.13
-pkgrel=1
-arch=('i686' 'x86_64')
-pkgdesc='Userland tools for Distributed Replicated Block Device'
-url='http://www.drbd.org'
-license=('GPL2')
-depends=('perl' 'bash')
-source=("http://oss.linbit.com/drbd/8.3/$pkgname-$pkgver.tar.gz"
-        "$pkgname.rc"
-        "$pkgname.service")
-backup=('etc/drbd.conf' 'etc/drbd.d/global_common.conf')
-md5sums=('760a25459ef6b7262a2a3572c1561c5b'
-         '8902a2f7aca6245c27e9566a1509312c'
-         'afbb345094db49b0a474c0b4e51c0acd')
-
-build() {
-  cd $pkgname-$pkgver
-  ./configure \
-    --prefix=/usr \
-    --localstatedir=/var \
-    --sysconfdir=/etc \
-    --with-distro=generic \
-    --with-utils \
-    --with-bashcompletion \
-    --with-udev \
-    --without-km \
-    --without-rgmanager \
-    --without-pacemaker \
-    --without-heartbeat \
-    --without-xen \
-    --with-initdir=/etc/rc.d
-    #--with-legacy_utils \
-  make
-}
-
-package() {
-  cd $pkgname-$pkgver
-  make DESTDIR="$pkgdir" install
-  # move forced /sbin binaries
-  cd "$pkgdir"
-  mv sbin/* usr/sbin
-  rmdir sbin
-  # fix hardcoded path in udev rules
-  sed -i 's,/sbin/drbdadm,/usr/sbin/drbdadm,' etc/udev/rules.d/65-drbd.rules
-  # move udev files
-  mv etc/udev usr/lib
-  # move bash completion
-  install -dm 755 usr/share/bash-completion
-  mv etc/bash_completion.d usr/share/bash-completion/completions
-  # remove /var/lock
-  rmdir var/lock
-  # autoload module
-  install -Dm 644 /dev/null usr/lib/modules-load.d/$pkgname.conf
-  echo 'drbd' > usr/lib/modules-load.d/$pkgname.conf
-  # setup initscript (replace)
-  cd "$srcdir"
-  install -Dm 755 $pkgname.rc "$pkgdir/etc/rc.d/$pkgname"
-  # install systemd stuff
-  install -Dm 644 $pkgname.service \
-    "$pkgdir/usr/lib/systemd/system/$pkgname.service"
-}
-
-# vim:set ts=2 sw=2 ft=sh et:
diff --git a/community-testing/drbd/drbd.rc b/community-testing/drbd/drbd.rc
deleted file mode 100644
index b8b196e4b..000000000
--- a/community-testing/drbd/drbd.rc
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/bash
-# Written by Sébastien Luttringer
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-DRBDADM='/usr/sbin/drbdadm'
-PROC_DRBD='/proc/drbd'
-
-check_config() {
-  # check if module is loaded
-  if [[ ! -e $PROC_DRBD ]]; then
-    echo "Missing $PROC_DRBD. Try to load drbd module!"
-    stat_fail
-    exit 1
-  fi
-  # check if config is correct
-  if ! $DRBDADM dump &>/dev/null; then
-      echo 'Invalid configuration'
-      stat_fail
-      exit 1
-  fi
-}
-
-case "$1" in
-  start)
-    stat_busy 'Starting DRBD resources'
-    # check module and config
-    check_config
-    # load config
-    $DRBDADM adjust all 2>/dev/null || { stat_fail; exit 1; }
-    # user interruptible version of wait-connect all
-    $DRBDADM wait-con-int 2>/dev/null || { stat_fail; exit 1; }
-    # become primary if configured
-    $DRBDADM sh-b-pri all 2>/dev/nul l|| { stat_fail; exit 1; }
-    add_daemon drbd
-    stat_done
-    ;;
-  stop)
-    stat_busy 'Stopping DRBD resources'
-    # check module and config
-    check_config
-    # disconnect and detach all resources
-    $DRBDADM down all 2>/dev/null || { stat_fail; exit 1; }
-    rm_daemon drbd
-    stat_done
-    ;;
-  restart)
-    $0 stop
-    $0 start
-    ;;
-  *)
-    echo "usage: $0 {start|stop|restart}"
-esac
-
-exit 0
-
-# vim:set ts=2 sw=2 ft=sh et:
diff --git a/community-testing/drbd/drbd.service b/community-testing/drbd/drbd.service
deleted file mode 100644
index ddd6c62b7..000000000
--- a/community-testing/drbd/drbd.service
+++ /dev/null
@@ -1,19 +0,0 @@
-[Unit]
-Description=Distributed Replicated Block Device
-After=systemd-modules-load.service network.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-
-# load config
-ExecStart=/usr/sbin/drbdadm adjust all
-# user interruptible version of wait-connect all
-ExecStart=/usr/sbin/drbdadm wait-con-int
-# become primary if configured
-ExecStart=/usr/sbin/drbdadm sh-b-pri all
-# disconnect and detach all resources
-ExecStop=/usr/sbin/drbdadm down all
-
-[Install]
-WantedBy=multi-user.target