diff options
Diffstat (limited to 'community-testing/percona-server')
| -rw-r--r-- | community-testing/percona-server/PKGBUILD | 103 | ||||
| -rw-r--r-- | community-testing/percona-server/my.cnf | 145 | ||||
| -rwxr-xr-x | community-testing/percona-server/mysqld | 77 | ||||
| -rw-r--r-- | community-testing/percona-server/percona.install | 26 |
4 files changed, 0 insertions, 351 deletions
diff --git a/community-testing/percona-server/PKGBUILD b/community-testing/percona-server/PKGBUILD deleted file mode 100644 index 4a03ded15..000000000 --- a/community-testing/percona-server/PKGBUILD +++ /dev/null @@ -1,103 +0,0 @@ -# Maintainer: Massimiliano Torromeo <massimiliano.torromeo@gmail.com> - -pkgname=percona-server -pkgver=5.5.18_rel23.0 -pkgrel=1 -pkgdesc="A backwards-compatible drop-in replacement for MySQL that provides improved performance, diagnostics and instrumentation, and manageability of the server" -arch=('i686' 'x86_64') - -depends=('mysql-clients' 'libaio') -conflicts=('mysql') -provides=('mysql') -optdepends=('perl-dbi' 'perl-dbd-mysql') -makedepends=('cmake' 'openssl' 'zlib') - -license=('GPL') -url="http://www.percona.com/software/percona-server/" -options=('!libtool' 'emptydirs') -backup=('etc/mysql/my.cnf') -install=percona.install -source=("http://www.percona.com/redir/downloads/Percona-Server-${pkgver%.*_*}/Percona-Server-${pkgver/_rel/-}/Percona-Server-${pkgver/_/-}.tar.gz" - 'mysqld' - 'my.cnf') - -build() { - cd "${srcdir}/Percona-Server-${pkgver/_/-}" - sed -i 's|ADD_SUBDIRECTORY(libmysqld/examples)|# ADD_SUBDIRECTORY(libmysqld/examples)|' CMakeLists.txt - - cd "${srcdir}" - rm -rf build - mkdir build - cd build - - # CFLAGS/CXXFLAGS as suggested upstream - CFLAGS="-fPIC ${CFLAGS} -fno-strict-aliasing -DBIG_JOINS=1 -fomit-frame-pointer" \ - CXXFLAGS="-fPIC ${CXXFLAGS} -fno-strict-aliasing -DBIG_JOINS=1 -felide-constructors -fno-rtti" \ - - cmake "${srcdir}/Percona-Server-${pkgver/_/-}" \ - -DMANUFACTURER=Arch \ - -DCMAKE_BUILD_TYPE=Release \ - -DCMAKE_INSTALL_PREFIX=/usr \ - -DSYSCONFDIR=/etc/mysql \ - -DMYSQL_DATADIR=/var/lib/mysql \ - -DMYSQL_UNIX_ADDR=/var/run/mysqld/mysqld.sock \ - -DDEFAULT_CHARSET=utf8 \ - -DDEFAULT_COLLATION=utf8_general_ci \ - -DENABLED_LOCAL_INFILE=ON \ - -DINSTALL_INFODIR=share/mysql/docs \ - -DINSTALL_MANDIR=share/man \ - -DINSTALL_PLUGINDIR=/usr/lib/mysql/plugin \ - -DINSTALL_SCRIPTDIR=bin \ - -DINSTALL_INCLUDEDIR=include/mysql \ - -DINSTALL_DOCREADMEDIR=share/mysql \ - -DINSTALL_SUPPORTFILESDIR=share/mysql \ - -DINSTALL_MYSQLSHAREDIR=share/mysql \ - -DINSTALL_DOCDIR=share/mysql/docs \ - -DINSTALL_SHAREDIR=share/mysql \ - -DWITH_READLINE=OFF \ - -DWITH_ZLIB=system \ - -DWITH_SSL=system \ - -DWITH_LIBWRAP=OFF \ - -DWITH_LIBEDIT=OFF \ - -DWITH_UNIT_TESTS=OFF \ - -DWITH_MYSQLD_LDFLAGS="${LDFLAGS}" \ - -DWITH_EXTRA_CHARSETS=complex \ - -DWITH_EMBEDDED_SERVER=ON \ - -DWITH_INNOBASE_STORAGE_ENGINE=ON \ - -DWITH_PARTITION_STORAGE_ENGINE=ON \ - -DWITH_PERFSCHEMA_STORAGE_ENGINE=ON \ - -DWITH_ARCHIVE_STORAGE_ENGINE=ON \ - -DWITH_BLACKHOLE_STORAGE_ENGINE=ON \ - -DWITH_FEDERATED_STORAGE_ENGINE=OFF \ - -DWITH_EXAMPLE_STORAGE_ENGINE=OFF - - make -} - -package() { - cd "${srcdir}"/build - make DESTDIR=${pkgdir} install - - install -Dm644 ${srcdir}/my.cnf ${pkgdir}/etc/mysql/my.cnf - install -Dm755 ${srcdir}/mysqld ${pkgdir}/etc/rc.d/mysqld - - # provided by libmysqlclient - rm ${pkgdir}/usr/bin/mysql_config - rm ${pkgdir}/usr/lib/libmysql* - rm -r ${pkgdir}/usr/include/ - rm ${pkgdir}/usr/share/man/man1/{mysql_config,mysql_client_test_embedded,mysqltest_embedded}.1 - - # provided by mysql-clients - rm ${pkgdir}/usr/bin/{mysql,mysqladmin,mysqlcheck,mysqldump,mysqlimport,mysqlshow,mysqlslap} - rm ${pkgdir}/usr/share/man/man1/{mysql,mysqladmin,mysqlcheck,mysqldump,mysqlimport,mysqlshow,mysqlslap}.1 - - # not needed - rm -r ${pkgdir}/usr/{data,mysql-test,sql-bench} - rm "${pkgdir}"/usr/share/man/man1/mysql-test-run.pl.1 - - install -dm700 "${pkgdir}"/var/lib/mysql -} - -md5sums=('17b266f5c10d01838522188f313a1ead' - '243864805611764a7e5883c1dba7afd8' - '1c949c0dbea5206af0db14942d9927b6') diff --git a/community-testing/percona-server/my.cnf b/community-testing/percona-server/my.cnf deleted file mode 100644 index 9a41b4fc3..000000000 --- a/community-testing/percona-server/my.cnf +++ /dev/null @@ -1,145 +0,0 @@ -# MySQL config file for medium systems. -# -# This is for a system with little memory (32M - 64M) where MySQL plays -# an important part, or systems up to 128M where MySQL is used together with -# other programs (such as a web server) -# -# MySQL programs look for option files in a set of -# locations which depend on the deployment platform. -# You can copy this option file to one of those -# locations. For information about these locations, see: -# http://dev.mysql.com/doc/mysql/en/option-files.html -# -# In this file, you can use all long options that a program supports. -# If you want to know which options a program supports, run the program -# with the "--help" option. - -# The following options will be passed to all MySQL clients -[client] -#password = your_password -port = 3306 -socket = /var/run/mysqld/mysqld.sock - -# Here follows entries for some specific programs - -# The MySQL server -[mysqld] -port = 3306 -socket = /var/run/mysqld/mysqld.sock -datadir = /var/lib/mysql -skip-external-locking -key_buffer_size = 16M -max_allowed_packet = 1M -table_open_cache = 64 -sort_buffer_size = 512K -net_buffer_length = 8K -read_buffer_size = 256K -read_rnd_buffer_size = 512K -myisam_sort_buffer_size = 8M - -# Don't listen on a TCP/IP port at all. This can be a security enhancement, -# if all processes that need to connect to mysqld run on the same host. -# All interaction with mysqld must be made via Unix sockets or named pipes. -# Note that using this option without enabling named pipes on Windows -# (via the "enable-named-pipe" option) will render mysqld useless! -# -skip-networking - -# Replication Master Server (default) -# binary logging is required for replication -log-bin=mysql-bin - -# binary logging format - mixed recommended -binlog_format=mixed - -# required unique id between 1 and 2^32 - 1 -# defaults to 1 if master-host is not set -# but will not function as a master if omitted -server-id = 1 - -# Replication Slave (comment out master section to use this) -# -# To configure this host as a replication slave, you can choose between -# two methods : -# -# 1) Use the CHANGE MASTER TO command (fully described in our manual) - -# the syntax is: -# -# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, -# MASTER_USER=<user>, MASTER_PASSWORD=<password> ; -# -# where you replace <host>, <user>, <password> by quoted strings and -# <port> by the master's port number (3306 by default). -# -# Example: -# -# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, -# MASTER_USER='joe', MASTER_PASSWORD='secret'; -# -# OR -# -# 2) Set the variables below. However, in case you choose this method, then -# start replication for the first time (even unsuccessfully, for example -# if you mistyped the password in master-password and the slave fails to -# connect), the slave will create a master.info file, and any later -# change in this file to the variables' values below will be ignored and -# overridden by the content of the master.info file, unless you shutdown -# the slave server, delete master.info and restart the slaver server. -# For that reason, you may want to leave the lines below untouched -# (commented) and instead use CHANGE MASTER TO (see above) -# -# required unique id between 2 and 2^32 - 1 -# (and different from the master) -# defaults to 2 if master-host is set -# but will not function as a slave if omitted -#server-id = 2 -# -# The replication master for this slave - required -#master-host = <hostname> -# -# The username the slave will use for authentication when connecting -# to the master - required -#master-user = <username> -# -# The password the slave will authenticate with when connecting to -# the master - required -#master-password = <password> -# -# The port the master is listening on. -# optional - defaults to 3306 -#master-port = <port> -# -# binary logging - not required for slaves, but recommended -#log-bin=mysql-bin - -# Uncomment the following if you are using InnoDB tables -#innodb_data_home_dir = /var/lib/mysql -#innodb_data_file_path = ibdata1:10M:autoextend -#innodb_log_group_home_dir = /var/lib/mysql -# You can set .._buffer_pool_size up to 50 - 80 % -# of RAM but beware of setting memory usage too high -#innodb_buffer_pool_size = 16M -#innodb_additional_mem_pool_size = 2M -# Set .._log_file_size to 25 % of buffer pool size -#innodb_log_file_size = 5M -#innodb_log_buffer_size = 8M -#innodb_flush_log_at_trx_commit = 1 -#innodb_lock_wait_timeout = 50 - -[mysqldump] -quick -max_allowed_packet = 16M - -[mysql] -no-auto-rehash -# Remove the next comment character if you are not familiar with SQL -#safe-updates - -[myisamchk] -key_buffer_size = 20M -sort_buffer_size = 20M -read_buffer = 2M -write_buffer = 2M - -[mysqlhotcopy] -interactive-timeout diff --git a/community-testing/percona-server/mysqld b/community-testing/percona-server/mysqld deleted file mode 100755 index 07f6b7e4c..000000000 --- a/community-testing/percona-server/mysqld +++ /dev/null @@ -1,77 +0,0 @@ -#!/bin/bash - -# general config -. /etc/rc.conf -. /etc/rc.d/functions - -getPID() { - echo $(pgrep -u mysql mysqld 2>/dev/null); -} - -case "$1" in - start) - stat_busy "Starting Percona Server" - [ ! -d /var/run/mysqld ] && install -d -g mysql -o mysql /var/run/mysqld &>/dev/null - if [ -z "$(getPID)" ]; then - /usr/bin/mysqld_safe --user=mysql &>/dev/null & - if [ $? -gt 0 ]; then - stat_fail - exit 1 - else - timeo=30 - while [ $timeo -gt 0 ]; do - response=`/usr/bin/mysqladmin -uUNKNOWN_USER ping 2>&1` && break - echo "$response" | grep -q "mysqld is alive" && break - sleep 1 - let timeo=${timeo}-1 - done - if [ $timeo -eq 0 ]; then - stat_fail - exit 1 - else - echo $(getPID) > /var/run/mysqld/mysqld.pid - add_daemon mysqld - stat_done - fi - fi - else - stat_fail - exit 1 - fi - ;; - - stop) - stat_busy "Stopping Percona Server" - if [ ! -z "$(getPID)" ]; then - timeo=30 - kill $(getPID) &> /dev/null - if [ $? -gt 0 ]; then - stat_fail - exit 1 - fi - while [ ! -z "$(getPID)" -a $timeo -gt 0 ]; do - sleep 1 - let timeo=${timeo}-1 - done - if [ -z "$(getPID)" ]; then - rm -f /var/run/mysqld/mysqld.pid &>/dev/null - rm_daemon mysqld - stat_done - else - stat_fail - exit 1 - fi - else - stat_fail - exit 1 - fi - ;; - - restart) - $0 stop - $0 start - ;; - *) - echo "usage: $0 {start|stop|restart}" -esac -exit 0 diff --git a/community-testing/percona-server/percona.install b/community-testing/percona-server/percona.install deleted file mode 100644 index caacccf1b..000000000 --- a/community-testing/percona-server/percona.install +++ /dev/null @@ -1,26 +0,0 @@ -post_install(){ - groupadd -g 89 mysql &>/dev/null - useradd -u 89 -g mysql -d /var/lib/mysql -s /bin/false mysql &>/dev/null - /usr/bin/mysql_install_db --user=mysql --basedir=/usr - chown -R mysql:mysql var/lib/mysql &>/dev/null -} - -post_upgrade(){ - getent group mysql >/dev/null 2>&1 || groupadd -g 89 mysql &>/dev/null - getent passwd mysql >/dev/null 2>&1 || useradd -u 89 -g mysql -d /var/lib/mysql -s /bin/false mysql &>/dev/null - - if [ "$(vercmp $2 5.5)" -lt 0 ]; then - echo " >> " - echo " >> Major version update. Consider restart the service, and then running mysql_upgrade after it." - echo " >> " - fi -} - -post_remove(){ - if getent passwd mysql >/dev/null 2>&1; then - userdel mysql - fi - if getent group mysql >/dev/null 2>&1; then - groupdel mysql - fi -} |