6 files changed, 0 insertions, 286 deletions
diff --git a/community-testing/tor/PKGBUILD b/community-testing/tor/PKGBUILD
deleted file mode 100644
index 91d4f0112..000000000
--- a/community-testing/tor/PKGBUILD
+++ /dev/null
@@ -1,53 +0,0 @@
-# $Id: PKGBUILD 72700 2012-06-20 10:57:00Z lfleischer $
-# Maintainer: Lukas Fleischer <archlinux at cryptocrack dot de>
-# Contributor: simo <simo@archlinux.org>
-
-pkgname=tor
-pkgver=0.2.2.37
-pkgrel=1
-pkgdesc='Anonymizing overlay network.'
-arch=('i686' 'x86_64')
-url='http://www.torproject.org/'
-license=('BSD')
-depends=('openssl' 'libevent' 'tsocks' 'bash')
-makedepends=('ca-certificates')
-backup=('etc/tor/torrc'
-        'etc/tor/torrc-dist'
-        'etc/tor/tor-tsocks.conf'
-        'etc/conf.d/tor')
-install='tor.install'
-source=("http://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
-        'torrc'
-        'tor'
-        'tor.conf.d'
-        'tor.service')
-md5sums=('5aafdca4fb6af6e12b503d32b03f14a7'
-         '8d3adf70109d16e860dbf414f9d70eac'
-         '56c75d4e8a66f34167d31e38c43793dd'
-         'f8e6868a389877346e7eebaacd1078bb'
-         '5c7c6834064b3530c442def6079ac3aa'
-         'cf23b97a1da09670214da6229a3ecb09')
-
-build() {
-  cd "${srcdir}/${pkgname}-${pkgver}"
-
-  ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
-  make
-}
-
-package() {
-  cd "${srcdir}/${pkgname}-${pkgver}"
-
-  make DESTDIR="${pkgdir}" install
-
-  install -dm0700 "${pkgdir}/var/lib/tor"
-
-  mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
-  install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
-  install -Dm0755 "${srcdir}/tor" "${pkgdir}/etc/rc.d/tor"
-  install -Dm0644 "${srcdir}/tor.conf.d" "${pkgdir}/etc/conf.d/tor"
-
-  install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
-
-  install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
-}
diff --git a/community-testing/tor/tor b/community-testing/tor/tor
deleted file mode 100644
index 522c498ce..000000000
--- a/community-testing/tor/tor
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/bash
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# source application-specific settings
-[ -f /etc/conf.d/tor ] && . /etc/conf.d/tor
-
-PID=`pidof -o %PPID /usr/bin/tor`
-case "$1" in
-  start)
-    stat_busy "Starting Tor Daemon"
-    if [ -z "${TOR_MAX_FD}" ] || ulimit -n "${TOR_MAX_FD}"; then
-      [ -z "$PID" ] && /usr/bin/tor -f ${TOR_CONF} ${TOR_ARGS} &>/dev/null
-      if [ $? -gt 0 ]; then
-        stat_fail
-      else
-        add_daemon tor
-        stat_done
-      fi
-    else
-      stat_fail
-    fi
-    ;;
-  stop)
-    stat_busy "Stopping Tor Daemon"
-    [ ! -z "$PID" ] && kill -INT $PID &> /dev/null
-    if [ $? -gt 0 ]; then
-      stat_fail
-    else
-      rm_daemon tor
-      stat_done
-    fi
-    ;;
-  restart)
-    $0 stop
-    sleep 3
-    $0 start
-    ;;
-  *)
-    echo "usage: $0 {start|stop|restart}"
-esac
-exit 0
-# vim: ft=sh ts=2 sw=2
diff --git a/community-testing/tor/tor.conf.d b/community-testing/tor/tor.conf.d
deleted file mode 100644
index e9fa098e0..000000000
--- a/community-testing/tor/tor.conf.d
+++ /dev/null
@@ -1,9 +0,0 @@
-# Location of the config file.
-TOR_CONF='/etc/tor/torrc'
-
-# Custom ulimit for maximum number of open files.
-TOR_MAX_FD=
-
-# Additional arguments.
-TOR_ARGS="--quiet"
-
diff --git a/community-testing/tor/tor.install b/community-testing/tor/tor.install
deleted file mode 100644
index 2c448d28e..000000000
--- a/community-testing/tor/tor.install
+++ /dev/null
@@ -1,24 +0,0 @@
-post_install() {
-  echo "-> Tor has been preconfigured to run as a client only."
-  echo "-> Tor is experimental software. Do not rely on it for strong anonymity."
-  echo '-> '
-  echo '-> You can set custom file descriptor ulimits for Tor in'
-  echo '-> "/etc/conf.d/tor" using the "TOR_MAX_FD" variable.'
-  groupadd -g 43 tor &>/dev/null
-  useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
-  chown tor:tor var/lib/tor &> /dev/null
-  chmod 700 var/lib/tor &> /dev/null
-}
-
-post_upgrade() {
-  echo '-> You can now set custom file descriptor ulimits for Tor in'
-  echo '-> "/etc/conf.d/tor" using the "TOR_MAX_FD" variable.'
-  getent group tor &>/dev/null || groupadd -g 43 tor &>/dev/null
-  getent passwd tor &>/dev/null || useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
-  chown tor:tor var/lib/tor &> /dev/null
-}
-
-pre_remove() {
-  getent passwd tor &>/dev/null && userdel tor &> /dev/null
-  getent group tor &>/dev/null && groupdel tor &> /dev/null
-}
diff --git a/community-testing/tor/tor.service b/community-testing/tor/tor.service
deleted file mode 100644
index eb9b556b5..000000000
--- a/community-testing/tor/tor.service
+++ /dev/null
@@ -1,13 +0,0 @@
-[Unit]
-Description=Anonymizing Overlay Network
-
-[Service]
-Type=forking
-GuessMainPID=yes
-EnvironmentFile=/etc/conf.d/tor
-ExecStart=/usr/bin/tor -f $TOR_CONF $TOR_ARGS
-ExecReload=/bin/kill -HUP $MAINPID
-KillSignal=SIGINT
-
-[Install]
-WantedBy=multi-user.target
diff --git a/community-testing/tor/torrc b/community-testing/tor/torrc
deleted file mode 100644
index 3505653ab..000000000
--- a/community-testing/tor/torrc
+++ /dev/null
@@ -1,143 +0,0 @@
-## CONFIGURED FOR ARCHLINUX
-
-## Last updated 22 July 2005 for Tor 0.1.0.13.
-## (May or may not work for older or newer versions of Tor.)
-#
-## See the man page, or http://tor.eff.org/tor-manual.html, for more
-## options you can use in this file.
-#
-# On Unix, Tor will look for this file in someplace like "~/.tor/torrc" or
-# "/etc/torrc"
-#
-# On Windows, Tor will look for the configuration file in someplace like
-# "Application Data\tor\torrc" or "Application Data\<username>\tor\torrc"
-#
-# With the default Mac OS X installer, Tor will look in ~/.tor/torrc or
-# /Library/Tor/torrc
-
-
-## Replace this with "SocksPort 0" if you plan to run Tor only as a
-## server, and not make any local application connections yourself.
-SocksPort 9050 # what port to open for local application connections
-SocksBindAddress 127.0.0.1 # accept connections only from localhost
-#SocksBindAddress 192.168.0.1:9100 # listen on a chosen IP/port too
-
-## Entry policies to allow/deny SOCKS requests based on IP address.
-## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests from SocksBindAddress.
-#SocksPolicy accept 192.168.0.1/16
-#SocksPolicy reject *
-
-## Allow no-name routers (ones that the dirserver operators don't
-## know anything about) in only these positions in your circuits.
-## Other choices (not advised) are entry,exit,introduction.
-AllowUnverifiedNodes middle,rendezvous
-
-## Logs go to stdout at level "notice" unless redirected by something
-## else, like one of the below lines. You can have as many log lines as
-## you want.
-##
-## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
-#Log notice file /var/log/tor/notices.log
-## Send only debug and info messages to /var/log/tor/debug.log
-#Log debug-info file /var/log/tor/debug.log
-## Send ONLY debug messages to /var/log/tor/debug.log
-#Log debug-debug file /var/log/tor/debug.log
-## To use the system log instead of Tor's logfiles, uncomment these lines:
-Log notice syslog
-## To send all messages to stderr:
-#Log debug stderr
-
-## Uncomment this to start the process in the background... or use
-## --runasdaemon 1 on the command line.
-RunAsDaemon 1
-User tor
-Group tor
-
-## Tor only trusts directories signed with one of these keys, and
-## uses the given addresses to connect to the trusted directory
-## servers. If no DirServer lines are specified, Tor uses the built-in
-## defaults (moria1, moria2, tor26), so you can leave this alone unless
-## you need to change it.
-#DirServer 18.244.0.188:9031 FFCB 46DB 1339 DA84 674C 70D7 CB58 6434 C437 0441
-#DirServer 18.244.0.114:80 719B E45D E224 B607 C537 07D0 E214 3E2D 423E 74CF
-#DirServer 86.59.21.38:80 847B 1F85 0344 D787 6491 A548 92F9 0493 4E4E B85D
-
-## The directory for keeping all the keys/etc. By default, we store
-## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
-DataDirectory /var/lib/tor
-
-## The port on which Tor will listen for local connections from Tor controller
-## applications, as documented in control-spec.txt.  NB: this feature is
-## currently experimental.
-#ControlPort 9051
-
-############### This section is just for location-hidden services ###
-
-## Look in .../hidden_service/hostname for the address to tell people.
-## HiddenServicePort x y:z says to redirect a port x request from the
-## client to y:z.
-
-#HiddenServiceDir /var/lib/tor/hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-
-#HiddenServiceDir /var/lib/tor/other_hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-#HiddenServicePort 22 127.0.0.1:22
-#HiddenServiceNodes moria1,moria2
-#HiddenServiceExcludeNodes bad,otherbad
-
-################ This section is just for servers #####################
-
-## NOTE: If you enable these, you should consider mailing your identity
-## key fingerprint to the tor-ops, so we can add you to the list of
-## servers that clients will trust. See
-## http://tor.eff.org/doc/tor-doc.html#server for details.
-
-## Required: A unique handle for this server
-#Nickname ididnteditheconfig
-
-## The IP or fqdn for this server. Leave commented out and Tor will guess.
-#Address noname.example.com
-
-## Contact info that will be published in the directory, so we can
-## contact you if you need to upgrade or if something goes wrong.
-## This is optional but recommended.
-#ContactInfo Random Person <nobody AT example dot com>
-## You might also include your PGP or GPG fingerprint if you have one:
-#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>
-
-## Required: what port to advertise for tor connections
-#ORPort 9001
-## If you want to listen on a port other than the one advertised
-## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment
-## the line below. You'll need to do ipchains or other port forwarding
-## yourself to make this work.
-#ORBindAddress 0.0.0.0:9090
-
-## Uncomment this to mirror the directory for others (please do)
-#DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised
-## in DirPort (e.g. to advertise 80 but bind 9091), uncomment the line
-## below. You'll need to do ipchains or other port forwarding yourself
-## to make this work.
-#DirBindAddress 0.0.0.0:9091
-
-## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to *replace*
-## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're *augmenting* (prepending to) the
-## default exit policy. Leave commented to just use the default, which is
-## available in the man page or at http://tor.eff.org/documentation.html
-##
-## Look at http://tor.eff.org/faq-abuse.html#TypicalAbuses
-## for issues you might encounter if you use the default exit policy.
-##
-## If certain IPs and ports are blocked externally, e.g. by your firewall,
-## you should update your exit policy to reflect this -- otherwise Tor
-## users will be told that those destinations are down.
-##
-#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
-#ExitPolicy accept *:119 # accept nntp as well as default exit policy
-#ExitPolicy reject *:* # middleman only -- no exits allowed
-