summaryrefslogtreecommitdiff
path: root/core/mdadm/mdadm_install
diff options
context:
space:
mode:
Diffstat (limited to 'core/mdadm/mdadm_install')
-rw-r--r--core/mdadm/mdadm_install70
1 files changed, 35 insertions, 35 deletions
diff --git a/core/mdadm/mdadm_install b/core/mdadm/mdadm_install
index b53258676..cf6159e40 100644
--- a/core/mdadm/mdadm_install
+++ b/core/mdadm/mdadm_install
@@ -1,45 +1,45 @@
-# vim: set ft=sh:
-
-build()
-{
- MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
- BINARIES=""
- FILES=""
- SCRIPT="mdadm"
+#!/bin/bash
+
+build() {
+ add_checked_modules -f 'dm-' 'drivers/md/*'
+
# check if a custom mdadm.conf exists
if grep -q ^ARRAY /etc/mdadm.conf; then
echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
add_file "/etc/mdadm.conf"
fi
add_binary "/sbin/mdassemble"
+
+ add_runscript
}
-help ()
-{
-cat<<HELPEOF
- This hook loads the necessary modules for any raid root device,
- and assembles the raid device when run.
-
- If arrays are defined in /etc/mdadm.conf, the file will be used instead
- of command line assembling.
-
- Command Line Setup:
- - for raid arrays with persistent superblocks:
- md=<md device no.>,dev0,dev1,...,devn
- md=<md device no.>,uuid
- - for partitionable raid arrays with persistent superblocks:
- md=d<md device no.>,dev0,dev1,...,devn
- md=d<md device no.>,uuid
-
- Parameters:
- - <md device no.> = the number of the md device:
- 0 means md0, 1 means md1, ...
- - <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
- or 0900878d:f95f6057:c39a36e9:55efa60a
- Examples:
- - md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
- This will setup 2 md partitionable arrays.
- - md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
- This will setup 2 md arrays with persistent superblocks.
+help() {
+ cat <<HELPEOF
+This hook loads the necessary modules for any raid root device,
+and assembles the raid device when run.
+
+If arrays are defined in /etc/mdadm.conf, the file will be used instead
+of command line assembling.
+
+Command Line Setup:
+- for raid arrays with persistent superblocks:
+ md=<md device no.>,dev0,dev1,...,devn
+ md=<md device no.>,uuid
+- for partitionable raid arrays with persistent superblocks:
+ md=d<md device no.>,dev0,dev1,...,devn
+ md=d<md device no.>,uuid
+
+Parameters:
+- <md device no.> = the number of the md device:
+ 0 means md0, 1 means md1, ...
+- <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+ or 0900878d:f95f6057:c39a36e9:55efa60a
+Examples:
+- md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+ This will setup 2 md partitionable arrays.
+- md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
+ This will setup 2 md arrays with persistent superblocks.
HELPEOF
}
+
+# vim: set ft=sh ts=4 sw=4 et: