summaryrefslogtreecommitdiff
path: root/testing/ppp
diff options
context:
space:
mode:
Diffstat (limited to 'testing/ppp')
-rw-r--r--testing/ppp/PKGBUILD94
-rw-r--r--testing/ppp/ip-down12
-rw-r--r--testing/ppp/ip-down.d.dns.sh3
-rw-r--r--testing/ppp/ip-up12
-rw-r--r--testing/ppp/ip-up.d.dns.sh7
-rw-r--r--testing/ppp/ipv6-down12
-rw-r--r--testing/ppp/ipv6-up12
-rw-r--r--testing/ppp/ipv6-up.d.iface-config.sh4
-rw-r--r--testing/ppp/options352
-rw-r--r--testing/ppp/plog7
-rw-r--r--testing/ppp/poff103
-rw-r--r--testing/ppp/pon32
-rw-r--r--testing/ppp/pon.1121
-rw-r--r--testing/ppp/ppp36
-rw-r--r--testing/ppp/ppp.systemd9
15 files changed, 0 insertions, 816 deletions
diff --git a/testing/ppp/PKGBUILD b/testing/ppp/PKGBUILD
deleted file mode 100644
index 9d3bacfb0..000000000
--- a/testing/ppp/PKGBUILD
+++ /dev/null
@@ -1,94 +0,0 @@
-# $Id: PKGBUILD 168656 2012-10-13 20:46:01Z thomas $
-# Maintainer: Thomas Baechler <thomas@archlinux.org>
-pkgname=ppp
-pkgver=2.4.5
-pkgrel=5
-pkgdesc="A daemon which implements the Point-to-Point Protocol for dial-up networking"
-arch=(i686 x86_64)
-url="http://www.samba.org/ppp/"
-license=('custom:GPL/BSD')
-groups=('base')
-depends=('glibc' 'libpcap>=1.0.0')
-backup=(etc/ppp/{chap-secrets,pap-secrets,options,ip-up,ip-down})
-source=(ftp://ftp.samba.org/pub/ppp/ppp-${pkgver}.tar.gz
- options
- pon
- poff
- ppp
- plog
- pon.1
- ip-up
- ip-down
- ip-up.d.dns.sh
- ip-down.d.dns.sh
- ipv6-up
- ipv6-down
- ipv6-up.d.iface-config.sh
- ppp.systemd)
-md5sums=('4621bc56167b6953ec4071043fe0ec57'
- '7a9259a8f038073eeea7e4552ff1849f'
- '48c024f73a80c8b69c4def22f86902cc'
- '2d811f8470ccdea3b8c4505a438483e9'
- '7561c73b557292d5ba1a9c5dbd270fde'
- '86cdaf133f7a79fb464f02d83afc7734'
- '44cc662ba9aa61dd9add3ddd4c5ded57'
- 'e4beb16ed600b61336d50b2bd2df7cd5'
- '529b924f644f80cf30d72a966abc7419'
- '4a074d74c29625b254a1db720cb87b99'
- '8d1be5af8e46393ba6eb273377831e38'
- '4cbd0a9af01c27067450ec7d3f5fa673'
- 'b75c2fbc4afa9f2d8108b680c88c7036'
- '9dde53aa5a931ebe1c7e3469199777c5'
- 'fafead5c9d66d0574e6f0a2e5f4d4631')
-
-build() {
- cd "${srcdir}/${pkgname}-${pkgver}"
- # fix CFLAGS
- # -D_GNU_SOURCE is needed for IPv6 to work apparently
- export CFLAGS="$CFLAGS -D_GNU_SOURCE"
- sed -i "s:-O2 -pipe -Wall -g:${CFLAGS}:" pppd/Makefile.linux
- sed -i "s:-g -O2:${CFLAGS}:" pppd/plugins/Makefile.linux
- sed -i "s:-O2:${CFLAGS}:" pppstats/Makefile.linux
- sed -i "s:-O2 -g -pipe:${CFLAGS}:" chat/Makefile.linux
- sed -i "s:-O:${CFLAGS}:" pppdump/Makefile.linux
-
- # enable active filter
- sed -i "s:^#FILTER=y:FILTER=y:" pppd/Makefile.linux
- # enable ipv6 support
- sed -i "s:^#HAVE_INET6=y:HAVE_INET6=y:" pppd/Makefile.linux
- # Enable Microsoft proprietary Callback Control Protocol
- sed -i "s:^#CBCP=y:CBCP=y:" pppd/Makefile.linux
-
- # Fix build error with recent kernels
- rm include/linux/if_pppol2tp.h
-
- ./configure --prefix=/usr
- make
-}
-
-package() {
- cd "${srcdir}/${pkgname}-${pkgver}"
- make DESTDIR="${pkgdir}/usr" install
- install -D -m644 ../options "${pkgdir}/etc/ppp/options"
- install -D -m755 ../ip-up "${pkgdir}/etc/ppp/ip-up"
- install -D -m755 ../ip-down "${pkgdir}/etc/ppp/ip-down"
- install -d -m755 "${pkgdir}/etc/ppp/ip-up.d"
- install -d -m755 "${pkgdir}/etc/ppp/ip-down.d"
- install -m755 ../ip-up.d.dns.sh "${pkgdir}/etc/ppp/ip-up.d/00-dns.sh"
- install -m755 ../ip-down.d.dns.sh "${pkgdir}/etc/ppp/ip-down.d/00-dns.sh"
- install -D -m755 ../ipv6-up "${pkgdir}/etc/ppp/ipv6-up"
- install -D -m755 ../ipv6-down "${pkgdir}/etc/ppp/ipv6-down"
- install -d -m755 "${pkgdir}/etc/ppp/ipv6-up.d"
- install -d -m755 "${pkgdir}/etc/ppp/ipv6-down.d"
- install -m755 ../ipv6-up.d.iface-config.sh "${pkgdir}/etc/ppp/ipv6-up.d/00-iface-config.sh"
- install -D -m755 ../pon "${pkgdir}/usr/bin/pon"
- install -D -m755 ../poff "${pkgdir}/usr/bin/poff"
- install -D -m755 ../plog "${pkgdir}/usr/sbin/plog"
- install -D -m600 etc.ppp/pap-secrets "${pkgdir}/etc/ppp/pap-secrets"
- install -D -m600 etc.ppp/chap-secrets "${pkgdir}/etc/ppp/chap-secrets"
- install -D -m755 ${srcdir}/ppp "${pkgdir}/etc/rc.d/ppp"
- install -D -m644 ${srcdir}/pon.1 "${pkgdir}/usr/share/man/man1/pon.1"
- install -d -m755 "${pkgdir}/etc/ppp/peers"
- chmod 0755 "${pkgdir}/usr/lib/pppd/${pkgver}"/*.so
- install -D -m644 "${srcdir}"/ppp.systemd "${pkgdir}"/usr/lib/systemd/system/ppp@.service
-}
diff --git a/testing/ppp/ip-down b/testing/ppp/ip-down
deleted file mode 100644
index cfd3ae093..000000000
--- a/testing/ppp/ip-down
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# This script is run by pppd after the connection has ended.
-#
-
-# Execute all scripts in /etc/ppp/ip-down.d/
-for ipdown in /etc/ppp/ip-down.d/*.sh; do
- if [ -x $ipdown ]; then
- # Parameters: interface-name tty-device speed local-IP-address remote-IP-address ipparam
- $ipdown "$@"
- fi
-done
diff --git a/testing/ppp/ip-down.d.dns.sh b/testing/ppp/ip-down.d.dns.sh
deleted file mode 100644
index 9e19f7d1b..000000000
--- a/testing/ppp/ip-down.d.dns.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-[ -e /etc/resolv.conf.backup.${IFNAME} ] && mv /etc/resolv.conf.backup.${IFNAME} /etc/resolv.conf
diff --git a/testing/ppp/ip-up b/testing/ppp/ip-up
deleted file mode 100644
index 20473d73a..000000000
--- a/testing/ppp/ip-up
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# This script is run by pppd when there's a successful ppp connection.
-#
-
-# Execute all scripts in /etc/ppp/ip-up.d/
-for ipup in /etc/ppp/ip-up.d/*.sh; do
- if [ -x $ipup ]; then
- # Parameters: interface-name tty-device speed local-IP-address remote-IP-address ipparam
- $ipup "$@"
- fi
-done
diff --git a/testing/ppp/ip-up.d.dns.sh b/testing/ppp/ip-up.d.dns.sh
deleted file mode 100644
index f9df543a4..000000000
--- a/testing/ppp/ip-up.d.dns.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-if [ "$USEPEERDNS" = "1" -a -f /etc/ppp/resolv.conf ]; then
- [ -e /etc/resolv.conf ] && mv /etc/resolv.conf /etc/resolv.conf.backup.${IFNAME}
- mv /etc/ppp/resolv.conf /etc/resolv.conf
- chmod 644 /etc/resolv.conf
-fi
diff --git a/testing/ppp/ipv6-down b/testing/ppp/ipv6-down
deleted file mode 100644
index d3b9e28b3..000000000
--- a/testing/ppp/ipv6-down
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# This script is run by pppd after the connection has ended.
-#
-
-# Execute all scripts in /etc/ppp/ipv6-down.d/
-for ipdown in /etc/ppp/ipv6-down.d/*.sh; do
- if [ -x $ipdown ]; then
- # Parameters: interface-name tty-device speed local-link-local-address remote-link-local-address ipparam
- $ipdown "$@"
- fi
-done
diff --git a/testing/ppp/ipv6-up b/testing/ppp/ipv6-up
deleted file mode 100644
index b294aafdc..000000000
--- a/testing/ppp/ipv6-up
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# This script is run by pppd when there's a successful ppp connection.
-#
-
-# Execute all scripts in /etc/ppp/ipv6-up.d/
-for ipup in /etc/ppp/ipv6-up.d/*.sh; do
- if [ -x $ipup ]; then
- # Parameters: interface-name tty-device speed local-link-local-address remote-link-local-address ipparam
- $ipup "$@"
- fi
-done
diff --git a/testing/ppp/ipv6-up.d.iface-config.sh b/testing/ppp/ipv6-up.d.iface-config.sh
deleted file mode 100644
index b23d6f61d..000000000
--- a/testing/ppp/ipv6-up.d.iface-config.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-echo 0 > /proc/sys/net/ipv6/conf/$1/use_tempaddr
-echo 2 > /proc/sys/net/ipv6/conf/$1/accept_ra
diff --git a/testing/ppp/options b/testing/ppp/options
deleted file mode 100644
index 63691842c..000000000
--- a/testing/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---
diff --git a/testing/ppp/plog b/testing/ppp/plog
deleted file mode 100644
index 84d2c7340..000000000
--- a/testing/ppp/plog
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-if [ -s /var/log/ppp.log ]; then
- exec tail "$@" /var/log/ppp.log
-else
- exec tail "$@" /var/log/syslog | grep ' \(pppd\|chat\)\['
-fi
diff --git a/testing/ppp/poff b/testing/ppp/poff
deleted file mode 100644
index 8b4dffc59..000000000
--- a/testing/ppp/poff
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/bin/sh
-
-# Written by John Hasler <john@dhh.gt.org> and based on work
-# by Phil Hands <phil@hands.com>. Distributed under the GNU GPL
-
-if [ -x /usr/bin/kill ]; then
- KILL="/usr/bin/kill"
-else
- KILL="/bin/kill"
-fi
-SIG=TERM
-DONE="stopped"
-MODE=""
-
-usage ()
-{
- cat <<!EOF!
-usage: $0 [option] [provider]
-options:
- -r Cause pppd to drop the line and redial.
- -d Toggle the state of pppd's debug option.
- -c Cause pppd to renegotiate compression.
- -a Stop all pppd's. 'provider' will be ignored.
- -h Print this help summary and exit.
- -v Print version and exit.
- none Stop pppd.
-
-Options may not be combined.
-
-If 'provider' is omitted pppd will be stopped or signalled if and only if
-there is exactly one running unless the '-a' option was given. If
-'provider' is supplied the pppd controlling the connection to that
-provider will be stopped or signalled.
-!EOF!
-}
-
-# Get option. If there are none replace the "?" that getopts puts in
-# FLAG on error with "null".
-getopts rdcavh FLAG
-if [ "$?" -ne 0 ]; then
- FLAG="null"
-fi
-
-# Check for additional options. Should be none.
-getopts :rdcavh DUMMY
-if [ "$?" -eq 0 ]; then
- echo "$0: Illegal option -- ${OPTARG}."
- exit 1
-fi
-
-case $FLAG in
- "r") SIG=HUP; DONE=signalled; shift ;;
- "d") SIG=USR1; DONE=signalled; shift ;;
- "c") SIG=USR2; DONE=signalled; shift ;;
- "a") MODE="all"; shift ;;
- "v") echo "$0$Revision: 1.1 $_TrickToPrint_RCS_Revision"; exit 0 ;;
- "h") usage; exit 0 ;;
- "?") exit 1;
-esac
-
-# Get the PIDs of all the pppds running. Could also get these from
-# /var/run, but pppd doesn't create .pid files until ppp is up.
-PIDS=`pidof pppd`
-
-# poff is pointless if pppd isn't running.
-if test -z "$PIDS"; then
- echo "$0: No pppd is running. None ${DONE}."
- exit 1
-fi
-
-# Find out how many pppd's are running.
-N=`echo "$PIDS" | wc -w`
-
-# If there are no arguments we can't do anything if there is more than one
-# pppd running.
-if test "$#" -eq 0 -a "$N" -gt 1 -a $FLAG != "a" ; then
- echo "$0: More than one pppd running and no "-a" option and
-no arguments supplied. Nothing ${DONE}."
- exit 1
-fi
-
-# If either there are no arguments or '-a' was specified kill all the
-# pppd's.
-if test "$#" -eq 0 -o "$MODE" = "all" ; then
- $KILL -$SIG $PIDS || {
- echo "$0: $KILL failed. None ${DONE}."
- exit 1
- }
- exit 0
-fi
-
-# There is an argument, so kill the pppd started on that provider.
-PID=`ps axw | grep "[ /]pppd call $1 *\$" | awk '{print $1}'`
-if test -n "$PID" ; then
- $KILL -$SIG $PID || {
- echo "$0: $KILL failed. None ${DONE}."
- exit 1
- }
-else
- echo "$0: I could not find a pppd process for provider '$1'. None ${DONE}."
- exit 1
-fi
-exit 0
diff --git a/testing/ppp/pon b/testing/ppp/pon
deleted file mode 100644
index 36885050b..000000000
--- a/testing/ppp/pon
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-case "$1" in
- -*) echo "
-Usage: pon [provider] [arguments]
-
-If you specify one argument, a PPP connection will be started using
-settings from the appropriate file in the /etc/ppp/peers/ directory, and
-any additional arguments supplied will be passed as extra arguments to
-pppd.
-"
- exit 0
- ;;
-esac
-
-if [ -z "$1" -a ! -f /etc/ppp/peers/provider ]; then
- echo "
-Please configure /etc/ppp/peers/provider or use a command line argument to
-use another file in /etc/ppp/peers/ directory.
-"
- exit 1
-fi
-
-if [ "$1" -a ! -f "/etc/ppp/peers/$1" ]; then
- echo "
-The file /etc/ppp/peers/$1 does not exist.
-"
- exit 1
-fi
-
-exec /usr/sbin/pppd call ${@:-provider}
-
diff --git a/testing/ppp/pon.1 b/testing/ppp/pon.1
deleted file mode 100644
index bb3220564..000000000
--- a/testing/ppp/pon.1
+++ /dev/null
@@ -1,121 +0,0 @@
-.\" This manual is published under the GPL.
-.\" All guidelines specified in the GPL apply here.
-.\" To get an ascii file:
-.\" groff -man -Tascii pon.1 > pon.txt
-.\"
-.TH PON 1 "July 2000" "Debian Project" "Debian PPPD"
-.SH NAME
-pon, poff, plog \- starts up, shuts down or lists the log of PPP connections
-.SH SYNOPSIS
-.B pon
-[ isp-name [ options ] ]
-.br
-.B poff
-[ -r ] [ -d ] [ -c ] [ -a ] [ -h ] [ isp-name ]
-.br
-.B plog
-[ arguments ]
-.SH DESCRIPTION
-This manual page describes the \fBpon\fP, \fBplog\fP and \fBpoff\fP
-scripts, which allow users to control PPP connections.
-..
-.SS pon
-\fBpon\fP, invoked without arguments, runs the \fI/etc/ppp/ppp_on_boot\fP
-file, if it exists and is executable. Otherwise, a PPP connection will be
-started using configuration from \fI/etc/ppp/peers/provider\fP.
-This is the default behaviour unless an \fBisp-name\fP argument is given.
-.PP
-For instance, to use ISP configuration "myisp" run:
-.IP
-pon myisp
-.PP
-\fBpon\fP will then use the options file \fI/etc/ppp/peers/myisp\fP.
-You can pass additional \fBoptions\fP after the ISP name, too.
-\fBpon\fP can be used to run multiple, simultaneous PPP connections.
-..
-.SS poff
-\fBpoff\fP closes a PPP connection. If more than one PPP connection exists,
-the one named in the argument to \fBpoff\fP will be killed, e.g.
-.IP
-poff myprovider2
-.PP
-will terminate the connection to myprovider2, and leave the PPP connections
-to e.g. "myprovider1" or "myprovider3" up and running.
-.PP
-\fBpoff\fP takes the following command line options:
-.RS
-.TP
-.B "\-r"
-causes the connection to be redialed after it is dropped.
-.TP
-.B "\-d"
-toggles the state of pppd's debug option.
-.TP
-.B "\-c"
-causes
-.BR pppd (8)
-to renegotiate compression.
-.TP
-.B "\-a"
-stops all running ppp connections. If the argument \fBisp-name\fP
-is given it will be ignored.
-.TP
-.B "\-h"
-displays help information.
-.TP
-.B "\-v"
-prints the version and exits.
-.PP
-If no argument is given, \fBpoff\fP will stop or signal pppd if and only
-if there is exactly one running. If more than one connection is active,
-it will exit with an error code of 1.
-..
-.SS plog
-\fBplog\fP shows you the last few lines of \fI/var/log/ppp.log\fP. If that
-file doesn't exist, it shows you the last few lines of your
-\fI/var/log/syslog\fP file, but excluding the lines not generated by pppd.
-This script makes use of the
-.BR tail (1)
-command, so arguments that can be passed to
-.BR tail (1)
-can also be passed to \fBplog\fP.
-.PP
-Note: the \fBplog\fP script can only be used by root or another system
-administrator in group "adm", due to security reasons. Also, to have all
-pppd-generated information in one logfile, that plog can show, you need the
-following line in your \fI/etc/syslog.conf\fP file:
-.PP
-local2.* -/var/log/ppp.log
-.RE
-.SH FILES
-.TP
-.I /etc/ppp/options
-PPPd system options file.
-.TP
-.I /etc/ppp/pap-secrets
-System PAP passwords file.
-.TP
-.I /etc/ppp/chap-secrets
-System CHAP passwords file.
-.TP
-.I /etc/ppp/peers/
-Directory holding the peer options files. The default file is called
-\fIprovider\fP.
-.TP
-.I /etc/chatscripts/provider
-The chat script invoked from the default \fI/etc/ppp/peers/provider\fP.
-.TP
-.I /var/log/ppp.log
-The default PPP log file.
-.SH AUTHORS
-The p-commands were written by Christoph Lameter <clameter@debian.org>.
-Updated and revised by Philip Hands <phil@hands.com>.
-.br
-This manual was written by Othmar Pasteka <othmar@tron.at>. Modified
-by Rob Levin <lilo@openprojects.net>, with some extensions taken from
-the old p-commands manual written by John Hasler <jhasler@debian.org>.
-.SH "SEE ALSO"
-.BR pppd (8),
-.BR chat (8),
-.BR tail (1).
-
diff --git a/testing/ppp/ppp b/testing/ppp/ppp
deleted file mode 100644
index 16e01bad7..000000000
--- a/testing/ppp/ppp
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-PID=`pidof -o %PPID /usr/sbin/pppd`
-case "$1" in
- start)
- stat_busy "Starting PPP daemon"
- [ -z "$PID" ] && /usr/bin/pon
- if [ $? -gt 0 ]; then
- stat_fail
- else
- add_daemon ppp
- stat_done
- fi
- ;;
- stop)
- stat_busy "Stopping PPP daemon"
- [ ! -z "$PID" ] && poff -a &> /dev/null
- if [ $? -gt 0 ]; then
- stat_fail
- else
- rm_daemon ppp
- stat_done
- fi
- ;;
- restart)
- $0 stop
- sleep 1
- $0 start
- ;;
- *)
- echo "usage: $0 {start|stop|restart}"
-esac
-exit 0
diff --git a/testing/ppp/ppp.systemd b/testing/ppp/ppp.systemd
deleted file mode 100644
index a5c490a73..000000000
--- a/testing/ppp/ppp.systemd
+++ /dev/null
@@ -1,9 +0,0 @@
-[Unit]
-Description=PPP link to %I
-Before=network.target
-
-[Service]
-ExecStart=/usr/sbin/pppd call %I nodetach
-
-[Install]
-WantedBy=multi-user.target