summaryrefslogtreecommitdiff
path: root/testing/shadow
diff options
context:
space:
mode:
Diffstat (limited to 'testing/shadow')
-rw-r--r--testing/shadow/LICENSE31
-rw-r--r--testing/shadow/PKGBUILD132
-rw-r--r--testing/shadow/adduser399
-rw-r--r--testing/shadow/chgpasswd4
-rw-r--r--testing/shadow/chpasswd6
-rw-r--r--testing/shadow/defaults.pam6
-rw-r--r--testing/shadow/login21
-rw-r--r--testing/shadow/login.defs197
-rw-r--r--testing/shadow/newusers6
-rw-r--r--testing/shadow/nscd-error-reporting.patch17
-rw-r--r--testing/shadow/passwd4
-rw-r--r--testing/shadow/shadow-add-missing-include.patch11
-rw-r--r--testing/shadow/shadow-strncpy-usage.patch25
-rwxr-xr-xtesting/shadow/shadow.cron.daily6
-rw-r--r--testing/shadow/shadow.install9
-rw-r--r--testing/shadow/useradd.defaults9
-rw-r--r--testing/shadow/userdel-avoid-bad-mem-access.patch57
-rw-r--r--testing/shadow/write-utmp-wtmp-entries.patch47
-rw-r--r--testing/shadow/xstrdup.patch9
19 files changed, 996 insertions, 0 deletions
diff --git a/testing/shadow/LICENSE b/testing/shadow/LICENSE
new file mode 100644
index 000000000..c5ab15a56
--- /dev/null
+++ b/testing/shadow/LICENSE
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 1990 - 1994, Julianne Frances Haugh
+ * Copyright (c) 1996 - 2000, Marek Michałkiewicz
+ * Copyright (c) 2001 - 2006, Tomasz Kłoczko
+ * Copyright (c) 2007 - 2009, Nicolas François
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the copyright holders or contributors may not be used to
+ * endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
diff --git a/testing/shadow/PKGBUILD b/testing/shadow/PKGBUILD
new file mode 100644
index 000000000..5757df664
--- /dev/null
+++ b/testing/shadow/PKGBUILD
@@ -0,0 +1,132 @@
+# $Id: PKGBUILD 151351 2012-02-25 15:53:24Z dreisner $
+# Maintainer: Dave Reisner <dreisner@archlinux.org>
+# Maintainer: Aaron Griffin <aaron@archlinux.org>
+
+pkgname=shadow
+pkgver=4.1.5
+pkgrel=4
+pkgdesc="Password and account management tool suite with support for shadow files and PAM"
+arch=('i686' 'x86_64')
+url='http://pkg-shadow.alioth.debian.org/'
+license=('BSD')
+groups=('base')
+depends=('bash' 'pam' 'acl')
+backup=(etc/login.defs
+ etc/pam.d/{chage,login,passwd,shadow,useradd,usermod,userdel}
+ etc/pam.d/{chpasswd,newusers,groupadd,groupdel,groupmod}
+ etc/pam.d/{chfn,chgpasswd,groupmems,chsh}
+ etc/default/useradd)
+options=('!libtool')
+install='shadow.install'
+source=("http://pkg-shadow.alioth.debian.org/releases/$pkgname-$pkgver.tar.bz2"{,.sig}
+ LICENSE
+ adduser
+ chgpasswd
+ chpasswd
+ defaults.pam
+ login
+ login.defs
+ newusers
+ passwd
+ shadow.cron.daily
+ useradd.defaults
+ nscd-error-reporting.patch
+ xstrdup.patch
+ shadow-strncpy-usage.patch
+ shadow-add-missing-include.patch
+ userdel-avoid-bad-mem-access.patch
+ write-utmp-wtmp-entries.patch)
+sha1sums=('3ab1ae0e30af36d04445314fcb5a079bdf05de41'
+ '0a31aafceb948a91fe7370a6378cafd6fd883145'
+ '33a6cf1e44a1410e5c9726c89e5de68b78f5f922'
+ '78ec184a499f9708adcfcf0b7a3b22a60bf39f91'
+ '4ad0e059406a305c8640ed30d93c2a1f62c2f4ad'
+ '12427b1ca92a9b85ca8202239f0d9f50198b818f'
+ '0e56fed7fc93572c6bf0d8f3b099166558bb46f1'
+ '895aad07c192b288b457e19dd7b8c55841b4ad22'
+ 'e5cab2118ecb1e61874cde842d7d04d1003f35cb'
+ '12427b1ca92a9b85ca8202239f0d9f50198b818f'
+ '611be25d91c3f8f307c7fe2485d5f781e5dee75f'
+ '5d83ba7e11c765c951867cbe00b0ae7ff57148fa'
+ '9ae93de5987dd0ae428f0cc1a5a5a5cd53583f19'
+ 'ae6eebb842c433ac4022c493294a13ed68e06acc'
+ '6010fffeed1fc6673ad9875492e1193b1a847b53'
+ '21e12966a6befb25ec123b403cd9b5c492fe5b16'
+ '0697a21f7519de30821da7772677035652df4ad2'
+ 'e1dd93d82c6eba76b5f17a9fefad4bbc513cff5b'
+ 'bcef8558c9123b396d2d4df26c815a951f97a91a')
+
+build() {
+ cd "$pkgname-$pkgver"
+
+ # avoid transitive linking issues with binutils 2.22
+ sed -i '/^user\(mod\|add\)_LDADD/s|$| -lattr|' src/Makefile.am
+
+ # link to glibc's crypt(3)
+ LDFLAGS+=" -lcrypt"
+
+ # need to offer these upstream
+ patch -Np1 <"$srcdir/xstrdup.patch"
+ patch -Np1 <"$srcdir/shadow-strncpy-usage.patch"
+
+ # backports queued for 4.1.5.1
+ patch -Np1 <"$srcdir/shadow-add-missing-include.patch"
+ patch -Np1 <"$srcdir/nscd-error-reporting.patch"
+
+ # sent to ML
+ patch -Np0 <"$srcdir/userdel-avoid-bad-mem-access.patch"
+
+ # revert to fix FS#28543
+ patch -RNp1 <"$srcdir/write-utmp-wtmp-entries.patch"
+
+ # supress etc/pam.d/*, we provide our own
+ sed -i '/^SUBDIRS/s/pam.d//' etc/Makefile.in
+
+ ./configure \
+ --prefix=/usr \
+ --libdir=/lib \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --with-libpam \
+ --without-selinux
+
+ make
+}
+
+package() {
+ cd "$pkgname-$pkgver"
+
+ make DESTDIR="$pkgdir" install
+
+ # license
+ install -Dm644 "$srcdir/LICENSE" "$pkgdir/usr/share/licenses/shadow/LICENSE"
+
+ # interactive useradd
+ install -Dm755 "$srcdir/adduser" "$pkgdir/usr/sbin/adduser"
+
+ # useradd defaults
+ install -Dm644 "$srcdir/useradd.defaults" "$pkgdir/etc/default/useradd"
+
+ # cron job
+ install -Dm744 "$srcdir/shadow.cron.daily" "$pkgdir/etc/cron.daily/shadow"
+
+ # login.defs
+ install -Dm644 "$srcdir/login.defs" "$pkgdir/etc/login.defs"
+
+ # PAM config - custom
+ install -dm755 "$pkgdir/etc/pam.d"
+ install -t "$pkgdir/etc/pam.d" -m644 "$srcdir"/{login,passwd,chgpasswd,chpasswd,newusers}
+
+ # PAM config - from tarball
+ install -Dm644 etc/pam.d/groupmems "$pkgdir/etc/pam.d/groupmems"
+
+ # we use the 'useradd' PAM file for other similar utilities
+ for file in chage chfn chsh groupadd groupdel groupmod shadow \
+ useradd usermod userdel; do
+ install -Dm644 "$srcdir/defaults.pam" "$pkgdir/etc/pam.d/$file"
+ done
+
+ # Remove su - using su from coreutils instead
+ rm "$pkgdir/bin/su"
+ find "$pkgdir/usr/share/man" -name 'su.1' -delete
+}
diff --git a/testing/shadow/adduser b/testing/shadow/adduser
new file mode 100644
index 000000000..a5d7fd4fa
--- /dev/null
+++ b/testing/shadow/adduser
@@ -0,0 +1,399 @@
+#!/bin/bash
+#
+# Copyright 1995 Hrvoje Dogan, Croatia.
+# Copyright 2002, 2003, 2004 Stuart Winter, West Midlands, England, UK.
+# Copyright 2004 Slackware Linux, Inc., Concord, CA, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#
+##########################################################################
+# Program: /usr/sbin/adduser
+# Purpose: Interactive front end to /usr/sbin/useradd for Slackware Linux
+# Author : Stuart Winter <stuart@polplex.co.uk>
+# Based on the original Slackware adduser by Hrvoje Dogan
+# with modifications by Patrick Volkerding
+# Version: 1.09
+##########################################################################
+# Usage..: adduser [<new_user_name>]
+##########################################################################
+# History #
+###########
+# v1.09 - 07/06/04
+# * Added standard Slackware script licence to the head of this file.
+# v1.08 - 25/04/04
+# * Disallow user names that begin with a numeric because useradd
+# (from shadow v4.03) does not allow them. <sw>
+# v1.07 - 07/03/03
+# * When supplying a null string for the uid (meaning 'Choose next available'),
+# if there were file names in the range 'a-z' in the pwd then the
+# egrep command considered these files rather than the null string.
+# The egrep expression is now in quotes.
+# Reported & fixed by Vadim O. Ustiansky <sw>
+# v1.06 - 31/03/03
+# * Ask to chown user.group the home directory if it already exists.
+# This helps reduce later confusion when adding users whose home dir
+# already exists (mounted partition for example) and is owned
+# by a user other than the user to which the directory is being
+# assigned as home. Default is not to chown.
+# Brought to my attention by mRgOBLIN. <sw>
+# v1.05 - 04/01/03
+# * Advise & prevent users from creating logins with '.' characters
+# in the user name. <sw>
+# * Made pending account creation info look neater <sw>
+# v1.04 - 09/06/02
+# * Catered for shadow-4.0.3's 'useradd' binary that no longer
+# will let you create a user that has any uppercase chars in it
+# This was reported on the userlocal.org forums
+# by 'xcp' - thanks. <sw,pjv>
+# v1.03 - 20/05/02
+# * Support 'broken' (null lines in) /etc/passwd and
+# /etc/group files <sw>
+# * For recycling UIDs (default still 'off'), we now look in
+# /etc/login.defs for the UID_MIN value and use it
+# If not found then default to 1000 <sw>
+# v1.02 - 10/04/02
+# * Fix user-specified UID bug. <pjv>
+# v1.01 - 23/03/02
+# * Match Slackware indenting style, simplify. <pjv>
+# v1.00 - 22/03/02
+# * Created
+#######################################################################
+
+# Path to files
+pfile=/etc/passwd
+gfile=/etc/group
+sfile=/etc/shells
+
+# Paths to binaries
+useradd=/usr/sbin/useradd
+chfn=/usr/bin/chfn
+passwd=/usr/bin/passwd
+
+# Defaults
+defhome=/home
+defshell=/bin/bash
+defgroup=users
+
+# Determine what the minimum UID is (for UID recycling)
+# (we ignore it if it's not at the beginning of the line (i.e. commented out with #))
+export recycleUIDMIN="$(grep ^UID_MIN /etc/login.defs | awk '{print $2}' 2>/dev/null)"
+# If we couldn't find it, set it to the default of 1000
+if [ -z "$recycleUIDMIN" ]; then
+ export recycleUIDMIN=1000 # this is the default from Slackware's /etc/login.defs
+fi
+
+
+# This setting enables the 'recycling' of older unused UIDs.
+# When you userdel a user, it removes it from passwd and shadow but it will
+# never get used again unless you specify it expliticly -- useradd (appears to) just
+# look at the last line in passwd and increment the uid. I like the idea of
+# recycling uids but you may have very good reasons not to (old forgotten
+# confidential files still on the system could then be owned by this new user).
+# We'll set this to no because this is what the original adduser shell script
+# did and it's what users expect.
+recycleuids=no
+
+# Function to read keyboard input.
+# bash1 is broken (even ash will take read -ep!), so we work around
+# it (even though bash1 is no longer supported on Slackware).
+function get_input() {
+ local output
+ if [ "`echo $BASH_VERSION | cut -b1`" = "1" ]; then
+ echo -n "${1} " >&2 # fudge for use with bash v1
+ read output
+ else # this should work with any other /bin/sh
+ read -ep "${1} " output
+ fi
+ echo $output
+}
+
+# Function to display the account info
+function display () {
+ local goose
+ goose="$(echo $2 | cut -d ' ' -f 2-)" # lop off the prefixed argument useradd needs
+ echo -n "$1 "
+ # If it's null then display the 'other' information
+ if [ -z "$goose" -a ! -z "$3" ]; then
+ echo "$3"
+ else
+ echo "$goose"
+ fi
+}
+
+# Function to check whether groups exist in the /etc/group file
+function check_group () {
+ local got_error group
+ if [ ! -z "$@" ]; then
+ for group in $@ ; do
+ local uid_not_named="" uid_not_num=""
+ grep -v "$^" $gfile | awk -F: '{print $1}' | grep "^${group}$" >/dev/null 2>&1 || uid_not_named=yes
+ grep -v "$^" $gfile | awk -F: '{print $3}' | grep "^${group}$" >/dev/null 2>&1 || uid_not_num=yes
+ if [ ! -z "$uid_not_named" -a ! -z "$uid_not_num" ]; then
+ echo "- Group '$group' does not exist"
+ got_error=yes
+ fi
+ done
+ fi
+ # Return exit code of 1 if at least one of the groups didn't exist
+ if [ ! -z "$got_error" ]; then
+ return 1
+ fi
+}
+
+#: Read the login name for the new user :#
+#
+# Remember that most Mail Transfer Agents are case independant, so having
+# 'uSer' and 'user' may cause confusion/things to break. Because of this,
+# useradd from shadow-4.0.3 no longer accepts usernames containing uppercase,
+# and we must reject them, too.
+
+# Set the login variable to the command line param
+echo
+LOGIN="$1"
+needinput=yes
+while [ ! -z $needinput ]; do
+ if [ -z "$LOGIN" ]; then
+ while [ -z "$LOGIN" ]; do LOGIN="$(get_input "Login name for new user []:")" ; done
+ fi
+ grep "^${LOGIN}:" $pfile >/dev/null 2>&1 # ensure it's not already used
+ if [ $? -eq 0 ]; then
+ echo "- User '$LOGIN' already exists; please choose another"
+ unset LOGIN
+ elif [ ! -z "$( echo $LOGIN | grep "^[0-9]" )" ]; then
+ echo "- User names cannot begin with a number; please choose another"
+ unset LOGIN
+ elif [ ! "$LOGIN" = "`echo $LOGIN | tr A-Z a-z`" ]; then # useradd does not allow uppercase
+ echo "- User '$LOGIN' contains illegal characters (uppercase); please choose another"
+ unset LOGIN
+ elif [ ! -z "$( echo $LOGIN | grep '\.' )" ]; then
+ echo "- User '$LOGIN' contains illegal characters (period/dot); please choose another"
+ unset LOGIN
+ else
+ unset needinput
+ fi
+done
+
+# Display the user name passed from the shell if it hasn't changed
+if [ "$1" = "$LOGIN" ]; then
+ echo "Login name for new user: $LOGIN"
+fi
+
+#: Get the UID for the user & ensure it's not already in use :#
+#
+# Whilst we _can_ allow users with identical UIDs, it's not a 'good thing' because
+# when you change password for the uid, it finds the first match in /etc/passwd
+# which isn't necessarily the correct user
+#
+echo
+needinput=yes
+while [ ! -z "$needinput" ]; do
+ _UID="$(get_input "User ID ('UID') [ defaults to next available ]:")"
+ grep -v "^$" $pfile | awk -F: '{print $3}' | grep "^${_UID}$" >/dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ echo "- That UID is already in use; please choose another"
+ elif [ ! -z "$(echo $_UID | egrep '[A-Za-z]')" ]; then
+ echo "- UIDs are numerics only"
+ else
+ unset needinput
+ fi
+done
+# If we were given a UID, then syntax up the variable to pass to useradd
+if [ ! -z "$_UID" ]; then
+ U_ID="-u ${_UID}"
+else
+ # Will we be recycling UIDs?
+ if [ "$recycleuids" = "yes" ]; then
+ U_ID="-u $(awk -F: '{uid[$3]=1} END { for (i=ENVIRON["recycleUIDMIN"];i in uid;i++);print i}' $pfile)"
+ fi
+fi
+
+#: Get the initial group for the user & ensure it exists :#
+#
+# We check /etc/group for both the text version and the group ID number
+echo
+needinput=yes
+while [ ! -z "$needinput" ]; do
+ GID="$(get_input "Initial group [ ${defgroup} ]:")"
+ check_group "$GID"
+ if [ $? -gt 0 ]; then
+ echo "- Please choose another"
+ else
+ unset needinput
+ fi
+done
+# Syntax the variable ready for useradd
+if [ -z "$GID" ]; then
+ GID="-g ${defgroup}"
+else
+ GID="-g ${GID}"
+fi
+
+#: Get additional groups for the user :#
+#
+echo
+needinput=yes
+while [ ! -z "$needinput" ]; do
+ AGID="$(get_input "Additional groups (comma separated) []:")"
+ AGID="$(echo "$AGID" | tr -d ' ' | tr , ' ')" # fix up for parsing
+ if [ ! -z "$AGID" ]; then
+ check_group "$AGID" # check all groups at once (treated as N # of params)
+ if [ $? -gt 0 ]; then
+ echo "- Please re-enter the group(s)"
+ else
+ unset needinput # we found all groups specified
+ AGID="-G $(echo "$AGID" | tr ' ' ,)"
+ fi
+ else
+ unset needinput # we don't *have* to have additional groups
+ fi
+done
+
+#: Get the new user's home dir :#
+#
+echo
+needinput=yes
+while [ ! -z "$needinput" ]; do
+ HME="$(get_input "Home directory [ ${defhome}/${LOGIN} ]")"
+ if [ -z "$HME" ]; then
+ HME="${defhome}/${LOGIN}"
+ fi
+ # Warn the user if the home dir already exists
+ if [ -d "$HME" ]; then
+ echo "- Warning: '$HME' already exists !"
+ getyn="$(get_input " Do you wish to change the home directory path ? (Y/n) ")"
+ if [ "$(echo $getyn | grep -i "n")" ]; then
+ unset needinput
+ # You're most likely going to only do this if you have the dir *mounted* for this user's $HOME
+ getyn="$(get_input " Do you want to chown $LOGIN.$( echo $GID | awk '{print $2}') $HME ? (y/N) ")"
+ if [ "$(echo $getyn | grep -i "y")" ]; then
+ CHOWNHOMEDIR=$HME # set this to the home directory
+ fi
+ fi
+ else
+ unset needinput
+ fi
+done
+HME="-d ${HME}"
+
+#: Get the new user's shell :#
+echo
+needinput=yes
+while [ ! -z "$needinput" ]; do
+ unset got_error
+ SHL="$(get_input "Shell [ ${defshell} ]")"
+ if [ -z "$SHL" ]; then
+ SHL="${defshell}"
+ fi
+ # Warn the user if the shell doesn't exist in /etc/shells or as a file
+ if [ -z "$(grep "^${SHL}$" $sfile)" ]; then
+ echo "- Warning: ${SHL} is not in ${sfile} (potential problem using FTP)"
+ got_error=yes
+ fi
+ if [ ! -f "$SHL" ]; then
+ echo "- Warning: ${SHL} does not exist as a file"
+ got_error=yes
+ fi
+ if [ ! -z "$got_error" ]; then
+ getyn="$(get_input " Do you wish to change the shell ? (Y/n) ")"
+ if [ "$(echo $getyn | grep -i "n")" ]; then
+ unset needinput
+ fi
+ else
+ unset needinput
+ fi
+done
+SHL="-s ${SHL}"
+
+#: Get the expiry date :#
+echo
+needinput=yes
+while [ ! -z "$needinput" ]; do
+ EXP="$(get_input "Expiry date (YYYY-MM-DD) []:")"
+ if [ ! -z "$EXP" ]; then
+ # Check to see whether the expiry date is in the valid format
+ if [ -z "$(echo "$EXP" | grep "^[[:digit:]]\{4\}[-]\?[[:digit:]]\{2\}[-]\?[[:digit:]]\{2\}$")" ]; then
+ echo "- That is not a valid expiration date"
+ else
+ unset needinput
+ EXP="-e ${EXP}"
+ fi
+ else
+ unset needinput
+ fi
+done
+
+# Display the info about the new impending account
+echo
+echo "New account will be created as follows:"
+echo
+echo "---------------------------------------"
+display "Login name.......: " "$LOGIN"
+display "UID..............: " "$_UID" "[ Next available ]"
+display "Initial group....: " "$GID"
+display "Additional groups: " "$AGID" "[ None ]"
+display "Home directory...: " "$HME"
+display "Shell............: " "$SHL"
+display "Expiry date......: " "$EXP" "[ Never ]"
+echo
+
+echo "This is it... if you want to bail out, hit Control-C. Otherwise, press"
+echo "ENTER to go ahead and make the account."
+read junk
+
+echo
+echo "Creating new account..."
+echo
+echo
+
+# Add the account to the system
+CMD="$useradd "$HME" -m "$EXP" "$U_ID" "$GID" "$AGID" "$SHL" "$LOGIN""
+$CMD
+
+if [ $? -gt 0 ]; then
+ echo "- Error running useradd command -- account not created!"
+ echo "(cmd: $CMD)"
+ exit 1
+fi
+
+# chown the home dir ? We can only do this once the useradd has
+# completed otherwise the user name doesn't exist.
+if [ ! -z "${CHOWNHOMEDIR}" ]; then
+ chown "$LOGIN"."$( echo $GID | awk '{print $2}')" "${CHOWNHOMEDIR}"
+fi
+
+# Set the finger information
+$chfn "$LOGIN"
+if [ $? -gt 0 ]; then
+ echo "- Warning: an error occurred while setting finger information"
+fi
+
+# Set a password
+$passwd "$LOGIN"
+if [ $? -gt 0 ]; then
+ echo "* WARNING: An error occured while setting the password for"
+ echo " this account. Please manually investigate this *"
+ exit 1
+fi
+
+echo
+echo
+echo "Account setup complete."
+exit 0
+
diff --git a/testing/shadow/chgpasswd b/testing/shadow/chgpasswd
new file mode 100644
index 000000000..8f49f5cc8
--- /dev/null
+++ b/testing/shadow/chgpasswd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+account required pam_permit.so
+password include system-auth
diff --git a/testing/shadow/chpasswd b/testing/shadow/chpasswd
new file mode 100644
index 000000000..5d447985a
--- /dev/null
+++ b/testing/shadow/chpasswd
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_unix.so
+password required pam_unix.so sha512 shadow
diff --git a/testing/shadow/defaults.pam b/testing/shadow/defaults.pam
new file mode 100644
index 000000000..a7bf8a4a5
--- /dev/null
+++ b/testing/shadow/defaults.pam
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_unix.so
+password required pam_permit.so
diff --git a/testing/shadow/login b/testing/shadow/login
new file mode 100644
index 000000000..b8555f89c
--- /dev/null
+++ b/testing/shadow/login
@@ -0,0 +1,21 @@
+#%PAM-1.0
+auth required pam_securetty.so
+auth requisite pam_nologin.so
+auth required pam_unix.so nullok
+auth required pam_tally.so onerr=succeed file=/var/log/faillog
+# use this to lockout accounts for 10 minutes after 3 failed attempts
+#auth required pam_tally.so deny=2 unlock_time=600 onerr=succeed file=/var/log/faillog
+account required pam_access.so
+account required pam_time.so
+account required pam_unix.so
+#password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
+#password required pam_unix.so sha512 shadow use_authtok
+session required pam_unix.so
+session required pam_env.so
+session required pam_motd.so
+session required pam_limits.so
+session optional pam_mail.so dir=/var/spool/mail standard
+session optional pam_lastlog.so
+session optional pam_loginuid.so
+-session optional pam_ck_connector.so nox11
+-session optional pam_systemd.so
diff --git a/testing/shadow/login.defs b/testing/shadow/login.defs
new file mode 100644
index 000000000..2500ee447
--- /dev/null
+++ b/testing/shadow/login.defs
@@ -0,0 +1,197 @@
+#
+# /etc/login.defs - Configuration control definitions for the login package.
+#
+# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH.
+# If unspecified, some arbitrary (and possibly incorrect) value will
+# be assumed. All other items are optional - if not specified then
+# the described action or option will be inhibited.
+#
+# Comment lines (lines beginning with "#") and blank lines are ignored.
+#
+# Modified for Linux. --marekm
+
+#
+# Delay in seconds before being allowed another attempt after a login failure
+#
+FAIL_DELAY 3
+
+#
+# Enable display of unknown usernames when login failures are recorded.
+#
+LOG_UNKFAIL_ENAB no
+
+#
+# Enable logging of successful logins
+#
+LOG_OK_LOGINS no
+
+#
+# Enable "syslog" logging of su activity - in addition to sulog file logging.
+# SYSLOG_SG_ENAB does the same for newgrp and sg.
+#
+SYSLOG_SU_ENAB yes
+SYSLOG_SG_ENAB yes
+
+#
+# If defined, either full pathname of a file containing device names or
+# a ":" delimited list of device names. Root logins will be allowed only
+# upon these devices.
+#
+CONSOLE /etc/securetty
+#CONSOLE console:tty01:tty02:tty03:tty04
+
+#
+# If defined, all su activity is logged to this file.
+#
+#SULOG_FILE /var/log/sulog
+
+#
+# If defined, file which maps tty line to TERM environment parameter.
+# Each line of the file is in a format something like "vt100 tty01".
+#
+#TTYTYPE_FILE /etc/ttytype
+
+#
+# If defined, the command name to display when running "su -". For
+# example, if this is defined as "su" then a "ps" will display the
+# command is "-su". If not defined, then "ps" would display the
+# name of the shell actually being run, e.g. something like "-sh".
+#
+SU_NAME su
+
+#
+# *REQUIRED*
+# Directory where mailboxes reside, _or_ name of file, relative to the
+# home directory. If you _do_ define both, MAIL_DIR takes precedence.
+# QMAIL_DIR is for Qmail
+#
+#QMAIL_DIR Maildir
+MAIL_DIR /var/spool/mail
+
+#
+# If defined, file which inhibits all the usual chatter during the login
+# sequence. If a full pathname, then hushed mode will be enabled if the
+# user's name or shell are found in the file. If not a full pathname, then
+# hushed mode will be enabled if the file exists in the user's home directory.
+#
+HUSHLOGIN_FILE .hushlogin
+#HUSHLOGIN_FILE /etc/hushlogins
+
+#
+# *REQUIRED* The default PATH settings, for superuser and normal users.
+#
+# (they are minimal, add the rest in the shell startup files)
+ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin
+ENV_PATH PATH=/bin:/usr/bin
+
+#
+# Terminal permissions
+#
+# TTYGROUP Login tty will be assigned this group ownership.
+# TTYPERM Login tty will be set to this permission.
+#
+# If you have a "write" program which is "setgid" to a special group
+# which owns the terminals, define TTYGROUP to the group number and
+# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign
+# TTYPERM to either 622 or 600.
+#
+TTYGROUP tty
+TTYPERM 0600
+
+#
+# Login configuration initializations:
+#
+# ERASECHAR Terminal ERASE character ('\010' = backspace).
+# KILLCHAR Terminal KILL character ('\025' = CTRL/U).
+# UMASK Default "umask" value.
+#
+# The ERASECHAR and KILLCHAR are used only on System V machines.
+# The ULIMIT is used only if the system supports it.
+# (now it works with setrlimit too; ulimit is in 512-byte units)
+#
+# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
+#
+ERASECHAR 0177
+KILLCHAR 025
+UMASK 077
+
+#
+# Password aging controls:
+#
+# PASS_MAX_DAYS Maximum number of days a password may be used.
+# PASS_MIN_DAYS Minimum number of days allowed between password changes.
+# PASS_WARN_AGE Number of days warning given before a password expires.
+#
+PASS_MAX_DAYS 99999
+PASS_MIN_DAYS 0
+PASS_WARN_AGE 7
+
+#
+# Min/max values for automatic uid selection in useradd
+#
+UID_MIN 1000
+UID_MAX 60000
+# System accounts
+SYS_UID_MIN 500
+SYS_UID_MAX 999
+
+#
+# Min/max values for automatic gid selection in groupadd
+#
+GID_MIN 1000
+GID_MAX 60000
+# System accounts
+SYS_GID_MIN 500
+SYS_GID_MAX 999
+
+#
+# Max number of login retries if password is bad
+#
+LOGIN_RETRIES 5
+
+#
+# Max time in seconds for login
+#
+LOGIN_TIMEOUT 60
+
+#
+# Which fields may be changed by regular users using chfn - use
+# any combination of letters "frwh" (full name, room number, work
+# phone, home phone). If not defined, no changes are allowed.
+# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
+#
+CHFN_RESTRICT rwh
+
+#
+# List of groups to add to the user's supplementary group set
+# when logging in on the console (as determined by the CONSOLE
+# setting). Default is none.
+#
+# Use with caution - it is possible for users to gain permanent
+# access to these groups, even when not logged in on the console.
+# How to do it is left as an exercise for the reader...
+#
+#CONSOLE_GROUPS floppy:audio:cdrom
+
+#
+# Should login be allowed if we can't cd to the home directory?
+# Default in no.
+#
+DEFAULT_HOME yes
+
+#
+# If defined, this command is run when removing a user.
+# It should remove any at/cron/print jobs etc. owned by
+# the user to be removed (passed as the first argument).
+#
+#USERDEL_CMD /usr/sbin/userdel_local
+
+#
+# Enable setting of the umask group bits to be the same as owner bits
+# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
+# the same as gid, and username is the same as the primary group name.
+#
+# This also enables userdel to remove user groups if no members exist.
+#
+USERGROUPS_ENAB yes
+
diff --git a/testing/shadow/newusers b/testing/shadow/newusers
new file mode 100644
index 000000000..5d447985a
--- /dev/null
+++ b/testing/shadow/newusers
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_unix.so
+password required pam_unix.so sha512 shadow
diff --git a/testing/shadow/nscd-error-reporting.patch b/testing/shadow/nscd-error-reporting.patch
new file mode 100644
index 000000000..a4075756e
--- /dev/null
+++ b/testing/shadow/nscd-error-reporting.patch
@@ -0,0 +1,17 @@
+diff --git a/upstream/trunk/lib/nscd.c b/upstream/trunk/lib/nscd.c
+index 227c205..7adb58f 100644
+--- a/lib/nscd.c
++++ b/lib/nscd.c
+@@ -39,8 +39,11 @@ int nscd_flush_cache (const char *service)
+ /* nscd is not installed, or it is installed but uses an
+ interpreter that is missing. Probably the former. */
+ return 0;
++ } else if (code == 1) {
++ /* nscd is installed, but it isn't active. */
++ return 0;
+ } else if (code != 0) {
+- (void) fprintf (stderr, _("%s: nscd exited with status %d"),
++ (void) fprintf (stderr, _("%s: nscd exited with status %d\n"),
+ Prog, code);
+ (void) fprintf (stderr, _(MSG_NSCD_FLUSH_CACHE_FAILED), Prog);
+ return -1;
diff --git a/testing/shadow/passwd b/testing/shadow/passwd
new file mode 100644
index 000000000..ab56da496
--- /dev/null
+++ b/testing/shadow/passwd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+#password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
+#password required pam_unix.so sha512 shadow use_authtok
+password required pam_unix.so sha512 shadow nullok
diff --git a/testing/shadow/shadow-add-missing-include.patch b/testing/shadow/shadow-add-missing-include.patch
new file mode 100644
index 000000000..5c9e946ef
--- /dev/null
+++ b/testing/shadow/shadow-add-missing-include.patch
@@ -0,0 +1,11 @@
+diff -Naur shadow-4.1.4.2+svn3283/libmisc/copydir.c shadow-4.1.4.2+svn3283.new/libmisc/copydir.c
+--- shadow-4.1.4.2+svn3283/libmisc/copydir.c 2010-09-05 11:35:26.000000000 -0400
++++ shadow-4.1.4.2+svn3283.new/libmisc/copydir.c 2011-06-26 01:26:52.000000000 -0400
+@@ -34,6 +34,7 @@
+
+ #ident "$Id: copydir.c 3283 2010-09-05 15:34:42Z nekral-guest $"
+
++#include <stdarg.h>
+ #include <assert.h>
+ #include <sys/stat.h>
+ #include <sys/types.h>
diff --git a/testing/shadow/shadow-strncpy-usage.patch b/testing/shadow/shadow-strncpy-usage.patch
new file mode 100644
index 000000000..5aba8fa01
--- /dev/null
+++ b/testing/shadow/shadow-strncpy-usage.patch
@@ -0,0 +1,25 @@
+diff -u shadow-4.1.5/src/usermod.c.orig shadow-4.1.5/src/usermod.c
+--- shadow-4.1.5/src/usermod.c.orig 2012-02-13 08:19:43.792146449 -0500
++++ shadow-4.1.5/src/usermod.c 2012-02-13 08:21:19.375114500 -0500
+@@ -182,7 +182,7 @@
+ struct tm *tp;
+
+ if (date < 0) {
+- strncpy (buf, "never", maxsize);
++ strncpy (buf, "never", maxsize - 1);
+ } else {
+ time_t t = (time_t) date;
+ tp = gmtime (&t);
+diff -u shadow-4.1.5/src/login.c.orig shadow-4.1.5/src/login.c
+--- shadow-4.1.5/src/login.c.orig 2012-02-13 08:19:50.951994454 -0500
++++ shadow-4.1.5/src/login.c 2012-02-13 08:21:04.490430937 -0500
+@@ -752,7 +752,8 @@
+ _("%s login: "), hostn);
+ } else {
+ strncpy (loginprompt, _("login: "),
+- sizeof (loginprompt));
++ sizeof (loginprompt) - 1);
++ loginprompt[sizeof (loginprompt) - 1] = '\0';
+ }
+
+ retcode = pam_set_item (pamh, PAM_USER_PROMPT, loginprompt);
diff --git a/testing/shadow/shadow.cron.daily b/testing/shadow/shadow.cron.daily
new file mode 100755
index 000000000..1931a793e
--- /dev/null
+++ b/testing/shadow/shadow.cron.daily
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# Verify integrity of password and group files
+/usr/sbin/pwck -r
+/usr/sbin/grpck -r
+
diff --git a/testing/shadow/shadow.install b/testing/shadow/shadow.install
new file mode 100644
index 000000000..14384c333
--- /dev/null
+++ b/testing/shadow/shadow.install
@@ -0,0 +1,9 @@
+post_upgrade() {
+ grpck -r >/dev/null 2>&1
+ if [ $? -eq 2 ]; then
+ printf '%s\n' \
+ "==> Warning: /etc/group or /etc/gshadow are inconsistent." \
+ " Run 'grpck' to correct this."
+ fi
+ return 0
+}
diff --git a/testing/shadow/useradd.defaults b/testing/shadow/useradd.defaults
new file mode 100644
index 000000000..b800b1777
--- /dev/null
+++ b/testing/shadow/useradd.defaults
@@ -0,0 +1,9 @@
+# useradd defaults file for ArchLinux
+# original changes by TomK
+GROUP=100
+HOME=/home
+INACTIVE=-1
+EXPIRE=
+SHELL=/bin/bash
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
diff --git a/testing/shadow/userdel-avoid-bad-mem-access.patch b/testing/shadow/userdel-avoid-bad-mem-access.patch
new file mode 100644
index 000000000..1d36562b2
--- /dev/null
+++ b/testing/shadow/userdel-avoid-bad-mem-access.patch
@@ -0,0 +1,57 @@
+Index: src/userdel.c
+===================================================================
+--- src/userdel.c (revision 3713)
++++ src/userdel.c (working copy)
+@@ -329,26 +329,33 @@
+ }
+
+ if (NULL == pwd) {
++ char gr_name[GROUP_NAME_MAX_LENGTH + 1];
++
++ /* make a copy of the group name before we delete it.
++ * we can't use ->gr_name after the group is deleted
++ * for logging purposes */
++ snprintf(gr_name, GROUP_NAME_MAX_LENGTH, "%s", grp->gr_name);
++
+ /*
+ * We can remove this group, it is not the primary
+ * group of any remaining user.
+ */
+- if (gr_remove (grp->gr_name) == 0) {
++ if (gr_remove (gr_name) == 0) {
+ fprintf (stderr,
+ _("%s: cannot remove entry '%s' from %s\n"),
+- Prog, grp->gr_name, gr_dbname ());
++ Prog, gr_name, gr_dbname ());
+ fail_exit (E_GRP_UPDATE);
+ }
+
+ #ifdef WITH_AUDIT
+ audit_logger (AUDIT_DEL_GROUP, Prog,
+ "deleting group",
+- grp->gr_name, AUDIT_NO_ID,
++ gr_name, AUDIT_NO_ID,
+ SHADOW_AUDIT_SUCCESS);
+ #endif /* WITH_AUDIT */
+ SYSLOG ((LOG_INFO,
+ "removed group '%s' owned by '%s'\n",
+- grp->gr_name, user_name));
++ gr_name, user_name));
+
+ #ifdef SHADOWGRP
+ if (sgr_locate (user_name) != NULL) {
+@@ -361,12 +368,12 @@
+ #ifdef WITH_AUDIT
+ audit_logger (AUDIT_DEL_GROUP, Prog,
+ "deleting shadow group",
+- grp->gr_name, AUDIT_NO_ID,
++ gr_name, AUDIT_NO_ID,
+ SHADOW_AUDIT_SUCCESS);
+ #endif /* WITH_AUDIT */
+ SYSLOG ((LOG_INFO,
+ "removed shadow group '%s' owned by '%s'\n",
+- grp->gr_name, user_name));
++ gr_name, user_name));
+
+ }
+ #endif /* SHADOWGRP */
diff --git a/testing/shadow/write-utmp-wtmp-entries.patch b/testing/shadow/write-utmp-wtmp-entries.patch
new file mode 100644
index 000000000..b4272ca61
--- /dev/null
+++ b/testing/shadow/write-utmp-wtmp-entries.patch
@@ -0,0 +1,47 @@
+Index: upstream/trunk/src/login.c
+===================================================================
+--- a/src/login.c (revision 3437)
++++ b/src/login.c (revision 3438)
+@@ -126,10 +126,12 @@
+ static void setup_tty (void);
+ static void process_flags (int argc, char *const *argv);
+ static /*@observer@*/const char *get_failent_user (/*@returned@*/const char *user);
++#ifndef USE_PAM
+ static void update_utmp (const char *user,
+ const char *tty,
+ const char *host,
+ /*@null@*/const struct utmp *utent);
++#endif /* ! USE_PAM */
+
+ #ifndef USE_PAM
+ static struct faillog faillog;
+@@ -471,6 +473,7 @@
+ return failent_user;
+ }
+
++#ifndef USE_PAM
+ /*
+ * update_utmp - Update or create an utmp entry in utmp, wtmp, utmpw, and
+ * wtmpx
+@@ -496,6 +499,7 @@
+ free (utx);
+ #endif /* USE_UTMPX */
+ }
++#endif /* ! USE_PAM */
+
+ /*
+ * login - create a new login session for a user
+@@ -1208,11 +1212,13 @@
+ }
+ }
+
++#ifndef USE_PAM
+ /*
+ * The utmp entry needs to be updated to indicate the new status
+ * of the session, the new PID and SID.
+ */
+ update_utmp (username, tty, hostname, utent);
++#endif /* ! USE_PAM */
+
+ /* The pwd and spwd entries for the user have been copied.
+ *
diff --git a/testing/shadow/xstrdup.patch b/testing/shadow/xstrdup.patch
new file mode 100644
index 000000000..bce434264
--- /dev/null
+++ b/testing/shadow/xstrdup.patch
@@ -0,0 +1,9 @@
+--- shadow-4.1.2.1/libmisc/xmalloc.c 2008-08-30 21:55:44.000000000 -0500
++++ shadow-4.1.2.1/libmisc/xmalloc.c.new 2008-08-30 21:55:36.000000000 -0500
+@@ -61,5 +61,6 @@
+
+ char *xstrdup (const char *str)
+ {
++ if(str == NULL) return NULL;
+ return strcpy (xmalloc (strlen (str) + 1), str);
+ }
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-26 07:52:32 +0000