summaryrefslogtreecommitdiff
path: root/testing/udev
diff options
context:
space:
mode:
Diffstat (limited to 'testing/udev')
-rw-r--r--testing/udev/80-drivers.rules14
-rw-r--r--testing/udev/81-arch.rules114
-rw-r--r--testing/udev/PKGBUILD106
-rwxr-xr-xtesting/udev/load-modules.sh80
-rw-r--r--testing/udev/static-audio-nodes-permissions.patch27
-rw-r--r--testing/udev/udev.install49
6 files changed, 0 insertions, 390 deletions
diff --git a/testing/udev/80-drivers.rules b/testing/udev/80-drivers.rules
deleted file mode 100644
index 56ac06cb4..000000000
--- a/testing/udev/80-drivers.rules
+++ /dev/null
@@ -1,14 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-ACTION=="remove", GOTO="drivers_end"
-
-DRIVER!="?*", ENV{MODALIAS}=="?*", RUN+="/lib/udev/load-modules.sh $env{MODALIAS}"
-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN+="/lib/udev/load-modules.sh tifm_sd"
-SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN+="/lib/udev/load-modules.sh tifm_ms"
-SUBSYSTEM=="memstick", RUN+="/lib/udev/load-modules.sh ms_block"
-SUBSYSTEM=="memstick", RUN+="/lib/udev/load-modules.sh mspro_block"
-SUBSYSTEM=="i2o", RUN+="/lib/udev/load-modules.sh i2o_block"
-SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/lib/udev/load-modules.sh sg"
-SUBSYSTEM=="module", KERNEL=="parport_pc", RUN+="/lib/udev/load-modules.sh ppdev"
-
-LABEL="drivers_end"
diff --git a/testing/udev/81-arch.rules b/testing/udev/81-arch.rules
deleted file mode 100644
index 3e71a9118..000000000
--- a/testing/udev/81-arch.rules
+++ /dev/null
@@ -1,114 +0,0 @@
-# Udev rules for Archlinux by Tobias Powalowski <tpowa@archlinux.org>
-# do not edit this file, it will be overwritten on update
-#
-# There are a number of modifiers that are allowed to be used in some
-# of the different fields. They provide the following subsitutions:
-#
-# %n the "kernel number" of the device.
-# For example, 'sda3' has a "kernel number" of '3'
-# %k the kernel name for the device.
-# %M the kernel major number for the device
-# %m the kernel minor number for the device
-# %b the bus id for the device
-# %c the string returned by the PROGRAM
-# %s{filename} the content of a sysfs attribute.
-# %% the '%' char itself.
-#
-# There are a number of modifiers that are allowed to be used in some of the
-# fields. See the udev man page for a full description of them.
-# global stuff
-#
-
-#####################################
-###### Hotplug rules - begin
-# Only additional modules,
-# which are not detectable,
-# are loaded here!
-#####################################
-# check if the device has already been claimed by a driver
-ACTION!="add", GOTO="drivers_end"
-
-#PNP addon modules
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP0800", RUN+="/lib/udev/load-modules.sh pcspkr"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="*PNP051[01]*", RUN+="/lib/udev/load-modules.sh irtty-sir"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNPb02f", RUN+="/lib/udev/load-modules.sh analog"
-
-# PARPORT addon modules
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh lp"
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", ATTRS{id}=="PNP040*", RUN+="/lib/udev/load-modules.sh ppdev"
-
-# fix ide cdrom detection on old proliant servers
-SUBSYSTEM=="pci", ENV{MODALIAS}=="pci:v00000E11d00000001sv00000000sd00000000bc06sc02i00", RUN+="/lib/udev/load-modules.sh ide-generic"
-
-LABEL="drivers_end"
-#####################################
-##### Hotplug rules - end
-#####################################
-
-#####################################
-# Additional Archlinux
-# Permissions and Symlinks - begin
-#####################################
-
-# permission for sg devices
-KERNEL=="sg[0-9]*", ATTRS{type}!="3|6", GROUP="disk", MODE="0660"
-
-# permissions for IDE CD devices
-SUBSYSTEMS=="ide", KERNEL=="hd[a-z]", ATTR{removable}=="1", ATTRS{media}=="cdrom*", GROUP="optical"
-
-# permissions for SCSI CD devices
-SUBSYSTEMS=="scsi", KERNEL=="sr[0-9]*", ATTRS{type}=="5", SYMLINK+="scd%n", GROUP="optical"
-SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="5", GROUP="optical"
-
-# permissions for removable devices like cardreaders or sticks
-KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="0", GROUP="storage"
-
-# permissions for firewire external drives
-KERNEL=="sd*", ATTRS{scsi_level}=="5", GROUP="storage"
-
-# permissions for usb to scsi external adapters
-KERNEL=="sd*", ATTRS{scsi_level}=="3", ATTRS{type}=="7", GROUP="storage"
-
-# permissions for ide storage like pcmcia card readers
-ACTION!="add", GOTO="pcmcia_end"
-SUBSYSTEM!="block", GOTO="pcmcia_end"
-KERNEL=="hd*[!0-9]", IMPORT{program}="ata_id --export $tempnode"
-KERNEL=="hd*", IMPORT{parent}=="ID_*"
-KERNEL=="hd*", ENV{ID_TYPE}=="generic", GROUP="storage"
-LABEL="pcmcia_end"
-
-# permissions for SCSI scanners
-SUBSYSTEMS=="scsi", KERNEL=="sg[0-9]*", ATTRS{type}=="6", GROUP="scanner"
-
-# mem
-KERNEL=="ram0", SYMLINK+="ramdisk"
-KERNEL=="ram1", SYMLINK+="ram"
-
-# video4linux
-
-KERNEL=="vbi0", SYMLINK+="vbi"
-KERNEL=="radio0", SYMLINK+="radio"
-KERNEL=="radio[0-9]*", GROUP="video"
-KERNEL=="video0", SYMLINK+="video"
-KERNEL=="vtx0", SYMLINK+="vtx"
-
-# video devices
-### xorg resets those permissions, adjust your xorg.conf!
-KERNEL=="3dfx*", GROUP="video"
-KERNEL=="fb[0-9]*", GROUP="video"
-
-# misc
-KERNEL=="sgi_fetchop", MODE="0666"
-KERNEL=="sonypi", MODE="0666"
-
-# USB devices
-KERNEL=="legousbtower*", MODE="0666"
-
-# kbd devices
-KERNEL=="kbd", MODE="0664"
-
-# miscellaneous
-KERNEL=="rtc|rtc0", GROUP="audio", MODE="0664"
-#######################################
-# Permissions and Symlinks - end
-#######################################
diff --git a/testing/udev/PKGBUILD b/testing/udev/PKGBUILD
deleted file mode 100644
index 0db5f45cf..000000000
--- a/testing/udev/PKGBUILD
+++ /dev/null
@@ -1,106 +0,0 @@
-# $Id: PKGBUILD 125635 2011-05-27 11:47:52Z tomegun $
-# Maintainer: Aaron Griffin <aaron@archlinux.org>
-# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
-# Maintainer: Thomas Bächler <thomas@archlinux.org>
-# Maintainer: Tom Gundersen <teg@jklm.no>
-
-pkgbase="udev"
-pkgname=('udev' 'udev-compat')
-pkgver=171
-pkgrel=1
-arch=(i686 x86_64)
-url="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
-license=('GPL')
-groups=('base')
-# older initscripts versions required start_udev
-options=(!makeflags !libtool)
-makedepends=('glibc' 'coreutils' 'util-linux' 'pciutils' 'libusb-compat' 'glib2' 'kernel26' 'gperf' 'libxslt' 'gobject-introspection')
-source=(http://www.kernel.org/pub/linux/utils/kernel/hotplug/$pkgbase-$pkgver.tar.bz2
- 80-drivers.rules
- 81-arch.rules
- load-modules.sh
- static-audio-nodes-permissions.patch)
-
-build() {
- cd $srcdir/$pkgbase-$pkgver
- # fix https://bugs.archlinux.org/task/24362 (will be in udev-172)
- patch -Np1 -i ../static-audio-nodes-permissions.patch
- ./configure --sysconfdir=/etc --with-rootlibdir=/lib --libexecdir=/lib/udev\
- --sbindir=/sbin --with-systemdsystemunitdir=/lib/systemd/system\
- --disable-rule-generator
- make
-}
-
-package_udev() {
- pkgdesc="The userspace dev tools (udev)"
- depends=('glibc' 'coreutils' 'util-linux' 'libusb-compat' 'glib2'
- 'module-init-tools>=3.11' 'pciutils')
- install=udev.install
- backup=(etc/udev/udev.conf
- etc/modprobe.d/framebuffer_blacklist.conf)
- conflicts=('pcmcia-cs' 'hotplug' 'initscripts<2009.07')
- replaces=('devfsd')
-
- cd $srcdir/$pkgbase-$pkgver
- make DESTDIR=${pkgdir} install
- # Replace original 80-drivers.rules with custom one.
- install -D -m644 $srcdir/80-drivers.rules $pkgdir/lib/udev/rules.d/80-drivers.rules
- # Install our rule for permissions and symlinks
- install -D -m644 $srcdir/81-arch.rules $pkgdir/lib/udev/rules.d/81-arch.rules
- # install our module loading subsystem
- install -D -m755 $srcdir/load-modules.sh $pkgdir/lib/udev/load-modules.sh
-
- # create framebuffer blacklist
- mkdir -p $pkgdir/etc/modprobe.d/
- for mod in $(find /lib/modules/*/kernel/drivers/video -name '*fb.ko.gz' -exec basename {} .ko.gz \;); do
- echo "blacklist $mod"
- done | sort -u > $pkgdir/etc/modprobe.d/framebuffer_blacklist.conf
-
- # create static devices in /lib/udev/devices/
- mkdir ${pkgdir}/lib/udev/devices/pts
- mkdir ${pkgdir}/lib/udev/devices/shm
-
- mknod -m 0600 ${pkgdir}/lib/udev/devices/console c 5 1
- mknod -m 0666 ${pkgdir}/lib/udev/devices/null c 1 3
- mknod -m 0660 ${pkgdir}/lib/udev/devices/zero c 1 5
- mknod -m 0666 ${pkgdir}/lib/udev/devices/kmsg c 1 11
-
- ln -snf /proc/self/fd ${pkgdir}/lib/udev/devices/fd
- ln -snf /proc/self/fd/0 ${pkgdir}/lib/udev/devices/stdin
- ln -snf /proc/self/fd/1 ${pkgdir}/lib/udev/devices/stdout
- ln -snf /proc/self/fd/2 ${pkgdir}/lib/udev/devices/stderr
- ln -snf /proc/kcore ${pkgdir}/lib/udev/devices/core
-
- # these static devices are created for convenience, to autoload the modules if necessary
- # /dev/loop0
- mknod -m 0660 ${pkgdir}/lib/udev/devices/loop0 b 7 0
- chgrp disk ${pkgdir}/lib/udev/devices/loop0
- # /dev/net/tun
- mkdir ${pkgdir}/lib/udev/devices/net
- mknod -m 0666 ${pkgdir}/lib/udev/devices/net/tun c 10 200
- # /dev/fuse
- mknod -m 0666 ${pkgdir}/lib/udev/devices/fuse c 10 229
- # /dev/ppp
- mknod -m 0600 ${pkgdir}/lib/udev/devices/ppp c 108 0
-
- # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group
- for i in $pkgdir/lib/udev/rules.d/*.rules; do
- sed -i -e 's#GROUP="dialout"#GROUP="uucp"#g;
- s#GROUP="tape"#GROUP="storage"#g;
- s#GROUP="cdrom"#GROUP="optical"#g' $i
- done
-}
-
-package_udev-compat() {
- pkgdesc="The userspace dev tools (udev) - additional rules for older kernels"
- depends=('udev')
- groups=('')
- cd $srcdir/$pkgbase-$pkgver
- install -d -m755 ${pkgdir}/lib/${pkgbase}/rules.d
- install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/rules/misc/30-kernel-compat.rules ${pkgdir}/lib/udev/rules.d/30-kernel-compat.rules
-}
-md5sums=('bdf4617284be2ecac11767437417e209'
- '4427855146513a4703ab5c7eb8a0156e'
- 'd8725e64fd0ce6e784ae795fae424c0a'
- 'f91fddc67609b45b244a624977c4247b'
- '4f625aea95a5597afd8cdf189421f193')
diff --git a/testing/udev/load-modules.sh b/testing/udev/load-modules.sh
deleted file mode 100755
index 1e2af913e..000000000
--- a/testing/udev/load-modules.sh
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/bash
-# Implement blacklisting for udev-loaded modules
-
-[ $# -ne 1 ] && exit 1
-
-. /etc/rc.conf
-
-# grab modules from rc.conf
-BLACKLIST="${MOD_BLACKLIST[@]}"
-MODPROBE="/sbin/modprobe"
-LOGGER="/usr/bin/logger"
-RESOLVEALIAS="${MODPROBE} --resolve-alias"
-USEBLACKLIST="--use-blacklist"
-
-if [ -f /proc/cmdline ]; then
- for cmd in $(cat /proc/cmdline); do
- case $cmd in
- disablemodules=*) eval $cmd ;;
- load_modules=off) exit ;;
- esac
- done
- #parse cmdline entries of the form "disablemodules=x,y,z"
- if [ -n "$disablemodules" ]; then
- BLACKLIST="$BLACKLIST $(echo $disablemodules | sed 's|,| |g')"
- fi
-fi
-
-#MODULES entries in rc.conf that begin with ! are blacklisted
-for mod in ${MODULES[@]}; do
- if [ "${mod}" != "${mod#!}" ]; then
- BLACKLIST="$BLACKLIST ${mod#!}"
- fi
-done
-
-if [ "$MOD_AUTOLOAD" = "yes" -o "$MOD_AUTOLOAD" = "YES" ]; then
- if [ -n "${BLACKLIST}" ]; then
- # If an alias name is on the blacklist, load no modules for this device
- if echo "${BLACKLIST}" | /bin/grep -q -e " $1 " -e "^$1 " -e " $1\$"; then
- $LOGGER -p info -t "$(basename $0)" "Not loading module alias '$1' because it is blacklisted"
- exit
- fi
- #sanitize the blacklist
- BLACKLIST="$(echo "$BLACKLIST" | sed -e 's|-|_|g')"
- # Try to find all modules for the alias
- mods=$($RESOLVEALIAS $1)
- # If no modules could be found, try if the alias name is a module name
- # In that case, omit the --use-blacklist parameter to imitate normal modprobe behaviour
- [ -z "${mods}" ] && $MODPROBE -qni $1 && mods="$1" && USEBLACKLIST=""
- [ -z "${mods}" ] && $LOGGER -p local0.debug -t "$(basename $0)" "'$1' is not a valid module or alias name"
- for mod in ${mods}; do
- # Find the module and all its dependencies
- deps="$($MODPROBE -i --show-depends ${mod})"
- [ $? -ne 0 ] && continue
-
- #sanitize the module names
- deps="$(echo "$deps" | sed \
- -e "s#^insmod /lib.*/\(.*\)\.ko.*#\1#g" \
- -e 's|-|_|g')"
-
- # If the module or any of its dependencies is blacklisted, don't load it
- for dep in $deps; do
- if echo "${BLACKLIST}" | /bin/grep -q -e " ${dep} " -e "^${dep} " -e " ${dep}\$"; then
- if [ "${dep}" = "${mod}" ]; then
- $LOGGER -p local0.info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because it is blacklisted"
- else
- $LOGGER -p local0.info -t "$(basename $0)" "Not loading module '${mod}' for alias '$1' because its dependency '${dep}' is blacklisted"
- fi
- continue 2
- fi
- done
- # modprobe usually uses the "blacklist" statements from modprobe.conf only to blacklist all aliases
- # of a module, but not the module itself. We use --use-blacklist here so that modprobe also blacklists
- # module names if we resolved alias names manually above
- $MODPROBE $USEBLACKLIST ${mod}
- done
- else
- $MODPROBE $USEBLACKLIST $1
- fi
-fi
-# vim: set et ts=4:
diff --git a/testing/udev/static-audio-nodes-permissions.patch b/testing/udev/static-audio-nodes-permissions.patch
deleted file mode 100644
index b1fc4f935..000000000
--- a/testing/udev/static-audio-nodes-permissions.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 3e227830ad6494700e18ae03297e8fb833ff26bf Mon Sep 17 00:00:00 2001
-From: Kay Sievers <kay.sievers@vrfy.org>
-Date: Fri, 27 May 2011 02:50:29 +0200
-Subject: [PATCH] rules: apply 'audio' group of the static snd/{seq,timer}
- nodes
-
----
- rules/rules.d/50-udev-default.rules | 3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/rules/rules.d/50-udev-default.rules b/rules/rules.d/50-udev-default.rules
-index cd745ef..cacb533 100644
---- a/rules/rules.d/50-udev-default.rules
-+++ b/rules/rules.d/50-udev-default.rules
-@@ -38,7 +38,8 @@ SUBSYSTEM=="graphics", GROUP="video"
- SUBSYSTEM=="drm", GROUP="video"
-
- # sound
--SUBSYSTEM=="sound", GROUP="audio"
-+SUBSYSTEM=="sound", GROUP="audio", \
-+ OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
-
- # DVB (video)
- SUBSYSTEM=="dvb", GROUP="video"
---
-1.7.5.3
-
diff --git a/testing/udev/udev.install b/testing/udev/udev.install
deleted file mode 100644
index b2ed69467..000000000
--- a/testing/udev/udev.install
+++ /dev/null
@@ -1,49 +0,0 @@
-# arg 1: the new package version
-# arg 2: the old package version
-
-post_upgrade() {
- if [ "$(vercmp $2 100)" -lt 0 ]; then
- echo "ATTENTION UDEV:"
- echo "----------"
- echo "udev >=098 rules syntax has changed, please update your own rules."
- echo "udev >=099 Added persistent network and CD/DVD Symlink generator rules."
- echo "Please read the instructions carefully before reboot."
- echo "They are located in /etc/udev/readme-udev-arch.txt"
- echo "----------"
- fi
- if [ "$(vercmp $2 169)" -lt 0 ]; then
- echo "ATTENTION UDEV:"
- echo "---------------"
- echo "Kernel 2.6.32 or newer is now required."
- echo "OSS emulation modules are not loaded by default, add to rc.conf if needed."
- echo "Arch specific cd symlinks are now no longer created."
- echo "cd and net persistent rules will no longer be autogenerated,"
- echo "see <https://wiki.archlinux.org/index.php/Udev> for details."
- echo "Errors are now logged (possibly to the console) by default."
- echo "---------------"
- fi
-}
-
-post_install() {
- # If a ramfs is mounted, we still need to make sure that /dev/{console,null,zero} exist
- # The Archlinux installer bind-mounts /dev to /mnt/dev, thus making the real /dev invisible
- ROOTDIR=""
- [ "$(stat -c %D /)" != "$(stat -c %D /dev)" ] && ROOTDIR=$(mktemp -d /tmp/udevinstall.XXXXXX)
- [ -n "${ROOTDIR}" ] && mount --bind / ${ROOTDIR}
- if [ ! -c ${ROOTDIR}/dev/console ]; then
- rm -f ${ROOTDIR}/dev/console
- mknod -m600 ${ROOTDIR}/dev/console c 5 1
- fi
- if [ ! -c ${ROOTDIR}/dev/null ]; then
- rm -f ${ROOTDIR}/dev/null
- mknod -m644 ${ROOTDIR}/dev/null c 1 3
- fi
- if [ ! -c ${ROOTDIR}/dev/zero ]; then
- rm -f ${ROOTDIR}/dev/zero
- mknod -m644 ${ROOTDIR}/dev/zero c 1 5
- fi
- if [ -n "${ROOTDIR}" ]; then
- umount ${ROOTDIR}
- rmdir ${ROOTDIR}
- fi
-}
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-08-14 18:24:23 +0000