[PATHS]
SERVICEHOME = ~/.gnunet/
# SERVICEHOME = /var/lib/gnunet/
# DEFAULTCONFIG = /etc/gnunet.conf
# If 'DEFAULTCONFIG' is not defined, the current
# configuration file is assumed to be the default,
# which is what we want by default...

[gnunetd]
HOSTKEY = $SERVICEHOME/.hostkey

[TESTING]
WEAKRANDOM = NO
# How long before failing a connection?
CONNECT_TIMEOUT = 30
# How many connect attempts should we make?
CONNECT_ATTEMPTS = 3
# How many connections can happen simultaneously?
MAX_OUTSTANDING_CONNECTIONS = 50

# Should we clean up the files on peer group shutdown?
DELETE_FILES = YES

[client]
HOME = $SERVICEHOME

[nat]
# Are we behind NAT?
BEHIND_NAT = NO

# Is the NAT hole-punched?
PUNCHED_NAT = NO

# Enable UPNP by default?
ENABLE_UPNP = NO

# Use addresses from the local network interfaces (inluding loopback, but also others)
USE_LOCALADDR = YES

# Use address obtained from a DNS lookup of our hostname
USE_HOSTNAME = NO

# External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!)
# normal interface IP address for non-NATed peers; 
# possibly auto-detected (using UPnP) if possible if not specified
# EXTERNAL_ADDRESS = 

# Should we use ICMP-based NAT traversal to try connect to NATed peers
# or, if we are behind NAT, to allow connections to us?
ENABLE_ICMP_CLIENT = NO
ENABLE_ICMP_SERVER = NO

# IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY;
# normal interface IP address for non-NATed peers; 
# likely auto-detected (via interface list) if not specified (!)
# INTERNAL_ADDRESS = 

# Disable IPv6 support
DISABLEV6 = NO

# How often do we query the DNS resolver
# for our hostname (to get our own IP), in ms
HOSTNAME_DNS_FREQUENCY = 1200000

# How often do we iterate over our 
# network interfaces to check for changes
# in our IP address? in ms
IFC_SCAN_FREQUENCY = 3000000

# How often do we query the DNS resolver
# for our hostname (to get our own IP), in ms
DYNDNS_FREQUENCY = 140000

[gnunet-nat-server]
HOSTNAME = gnunet.org
PORT = 5724

[transport-tcp]
# Use 0 to ONLY advertise as a peer behind NAT (no port binding)
PORT = 2086
ADVERTISED_PORT = 2086

# Maximum number of open TCP connections allowed
MAX_CONNECTIONS = 128

TIMEOUT = 5000

# ACCEPT_FROM =
# ACCEPT_FROM6 =
# REJECT_FROM =
# REJECT_FROM6 =
# BINDTO =

MAX_CONNECTIONS = 128


[transport-udp]
PORT = 2086

MAX_BPS = 1000000


[transport-http]
PORT = 1080
MAX_CONNECTIONS = 128

[transport-https]
PORT = 4433
CRYPTO_INIT = NORMAL
KEY_FILE = https.key
CERT_FILE = https.cert
MAX_CONNECTIONS = 128


[transport-wlan]
# Name of the interface in monitor mode (typically monX)
INTERFACE = mon0
# Real hardware, no testing
TESTMODE = 0


[arm]
PORT = 2087
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-arm
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
DEFAULTSERVICES = topology hostlist
UNIXPATH = /tmp/gnunet-service-arm.sock
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES
# GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs
# GLOBAL_PREFIX =
# USERNAME =
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO =
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =

[statistics]
AUTOSTART = YES
PORT = 2088
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-statistics
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
UNIXPATH = /tmp/gnunet-service-statistics.sock
UNIX_MATCH_UID = NO
UNIX_MATCH_GID = YES
# DISABLE_SOCKET_FORWARDING = NO
# USERNAME = 
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO =
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =

[resolver]
AUTOSTART = YES
PORT = 2089
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-resolver
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
UNIXPATH = /tmp/gnunet-service-resolver.sock
UNIX_MATCH_UID = NO
UNIX_MATCH_GID = NO
# DISABLE_SOCKET_FORWARDING = NO
# USERNAME = 
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO =
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =

[peerinfo]
AUTOSTART = YES
PORT = 2090
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-peerinfo
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
UNIXPATH = /tmp/gnunet-service-peerinfo.sock
UNIX_MATCH_UID = NO
UNIX_MATCH_GID = YES
# DISABLE_SOCKET_FORWARDING = NO
# USERNAME = 
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO = 
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =
HOSTS = $SERVICEHOME/data/hosts/


[transport]
AUTOSTART = YES
PORT = 2091
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-transport
#PREFIX = valgrind
NEIGHBOUR_LIMIT = 50
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
PLUGINS = tcp
UNIXPATH = /tmp/gnunet-service-transport.sock
BLACKLIST_FILE = $SERVICEHOME/blacklist
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES
# DISABLE_SOCKET_FORWARDING = NO
# USERNAME = 
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO =
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =


# ATS options
DUMP_MLP = NO
DUMP_SOLUTION = NO
DUMP_OVERWRITE = NO 
DUMP_MIN_PEERS = 0
DUMP_MIN_ADDRS = 0
DUMP_OVERWRITE = NO
ATS_MIN_INTERVAL = 15000
ATS_EXEC_INTERVAL = 30000


[core]
AUTOSTART = YES
PORT = 2092
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-core
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
# quotas are in bytes per second now!
TOTAL_QUOTA_IN = 65536
TOTAL_QUOTA_OUT = 65536
UNIXPATH = /tmp/gnunet-service-core.sock
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES
# DISABLE_SOCKET_FORWARDING = NO
# DEBUG = YES
# USERNAME = 
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO =
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =


[topology]
MINIMUM-FRIENDS = 0
FRIENDS-ONLY = NO
AUTOCONNECT = YES
TARGET-CONNECTION-COUNT = 16
FRIENDS = $SERVICEHOME/friends
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-daemon-topology

[hostlist]
# port for hostlist http server
HTTPPORT = 8080
HOME = $SERVICEHOME
HOSTLISTFILE = $SERVICEHOME/hostlist/learned.data
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-daemon-hostlist
# consider having "-e" as default as well once implemented
OPTIONS = -b
SERVERS = http://v9.gnunet.org:58080/
# proxy for downloading hostlists
HTTP-PROXY = 


[datastore]
AUTOSTART = YES
UNIXPATH = /tmp/gnunet-service-datastore.sock
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES
PORT = 2093
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-datastore
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
QUOTA = 100000000
BLOOMFILTER = $SERVICEHOME/fs/bloomfilter
DATABASE = sqlite
# DISABLE_SOCKET_FORWARDING = NO

[datastore-sqlite]
FILENAME = $SERVICEHOME/datastore/sqlite.db

[datastore-postgres]
CONFIG = connect_timeout=10; dbname=gnunet

[datastore-mysql]
DATABASE = gnunet
CONFIG = ~/.my.cnf
# USER = gnunet
# PASSWORD = 
# HOST = localhost
# PORT = 3306

[datacache-mysql]
DATABASE = gnunetcheck
CONFIG = ~/.my.cnf
# USER = gnunet
# PASSWORD =
# HOST = localhost
# PORT = 3306


[fs]
AUTOSTART = YES
INDEXDB = $SERVICEHOME/idxinfo.lst
TRUST = $SERVICEHOME/data/credit/
IDENTITY_DIR = $SERVICEHOME/identities/
STATE_DIR = $SERVICEHOME/persistence/
UPDATE_DIR = $SERVICEHOME/updates/
PORT = 2094
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-fs
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;

DELAY = YES
CONTENT_CACHING = YES
CONTENT_PUSHING = YES

UNIXPATH = /tmp/gnunet-service-fs.sock
UNIX_MATCH_UID = NO
UNIX_MATCH_GID = YES
# DISABLE_SOCKET_FORWARDING = NO
# DEBUG = YES
MAX_PENDING_REQUESTS = 65536
# Maximum frequency we're allowed to poll the datastore
# for content for migration (can be used to reduce 
# GNUnet's disk-IO rate)
MIN_MIGRATION_DELAY = 100
EXPECTED_NEIGHBOUR_COUNT = 128

[dht]
AUTOSTART = YES
PORT = 2095
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-dht
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
BUCKET_SIZE = 4
UNIXPATH = /tmp/gnunet-service-dht.sock
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES
# DISABLE_SOCKET_FORWARDING = NO
# DEBUG = YES
# USERNAME = 
# MAXBUF =
# TIMEOUT =
# DISABLEV6 =
# BINDTO =
# REJECT_FROM =
# REJECT_FROM6 =
# PREFIX =
# DO_FIND_PEER =
# STRICT_KADEMLIA =
# USE_MAX_HOPS =
# MAX_HOPS =
# REPUBLISH = YES
# REPLICATION_FREQUENCY = 60 
# STOP_ON_CLOSEST =
# STOP_FOUND =
# CONVERGE_MODIFIER =


[dhtcache]
DATABASE = sqlite
QUOTA = 1024000

[block]
PLUGINS = fs dht test dns

[mesh]
AUTOSTART = YES
PORT = 2096
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-mesh
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
UNIXPATH = /tmp/gnunet-service-mesh.sock
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES

[nse]
AUTOSTART = YES
PORT = 2097
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-nse
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
UNIXPATH = /tmp/test-nse-service-nse.unix
UNIX_MATCH_UID = YES
UNIX_MATCH_GID = YES
PROOFFILE = $SERVICEHOME/.nse-proof
HISTOGRAM = $SERVICEHOME/nse-history.log

# How 'slowly' should the proof-of-work be constructed (delay
# between rounds in ms); sane values between 0 and ~1000.
WORKDELAY = 5

# Note: changing any of the values below will make this peer
# completely incompatible with other peers! 
INTERVAL = 3600000
WORKBITS = 20


[vpn]
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-daemon-vpn
IPV6ADDR = 1234::1
IPV6PREFIX = 32
IPV4ADDR = 10.11.10.1
IPV4MASK = 255.255.0.0
VIRTDNS = 10.11.10.2
IFNAME = vpn-gnunet

[exit]
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-daemon-exit
IPV6ADDR = 1234:1::1
IPV6PREFIX = 32
IPV4ADDR = 10.10.1.1
IPV4MASK = 255.255.0.0
IFNAME = exit-gnunet
ENABLE_UDP = NO
ENABLE_TCP = NO

[dns]
AUTOSTART = YES
PORT = 0
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-dns
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
UNIXPATH = /tmp/gnunet-service-dns.sock
PROVIDE_EXIT = NO