moved the last bits from setup script to the interactive profile. still a LOT of de-coupling and refactoring to do though

2 files changed, 530 insertions, 531 deletions

diff --git a/src/lib/setup_TOPROCESS b/src/lib/setup_TOPROCESS
deleted file mode 100644
index 917dc9c..0000000
--- a/src/lib/setup_TOPROCESS
+++ /dev/null
@@ -1,531 +0,0 @@
-#!/bin/bash
-
-autoprepare()
-{
-    DISCS=$(finddisks)
-    if [ $(echo $DISCS | wc -w) -gt 1 ]; then
-        DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
-        DIALOG --menu "Select the hard drive to use" 14 55 7 $(finddisks _) 2>$ANSWER || return 1
-        DISC=$(cat $ANSWER)
-    else
-        DISC=$DISCS
-    fi
-    SET_DEFAULTFS=""
-    BOOT_PART_SET=""
-    SWAP_PART_SET=""
-    ROOT_PART_SET=""
-    CHOSEN_FS=""
-    # get just the disk size in 1000*1000 MB
-    DISC_SIZE=$(hdparm -I /dev/sda | grep -F '1000*1000' | sed "s/^.*:[ \t]*\([0-9]*\) MBytes.*$/\1/")
-    while [ "$SET_DEFAULTFS" = "" ]; do
-        FSOPTS="ext2 ext2 ext3 ext3"
-        [ "$(which mkreiserfs 2>/dev/null)" ] && FSOPTS="$FSOPTS reiserfs Reiser3"
-        [ "$(which mkfs.xfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS xfs XFS"
-        [ "$(which mkfs.jfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS jfs JFS"
-        while [ "$BOOT_PART_SET" = "" ]; do
-            DIALOG --inputbox "Enter the size (MB) of your /boot partition.  Minimum value is 16.\n\nDisk space left: $DISC_SIZE MB" 8 65 "32" 2>$ANSWER || return 1
-            BOOT_PART_SIZE="$(cat $ANSWER)"
-            if [ "$BOOT_PART_SIZE" = "" ]; then
-                DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
-            else
-                if [ "$BOOT_PART_SIZE" -ge "$DISC_SIZE" -o "$BOOT_PART_SIZE" -lt "16" -o "$SBOOT_PART_SIZE" = "$DISC_SIZE" ]; then
-                    DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
-                else
-                    BOOT_PART_SET=1
-                fi
-            fi
-        done
-        DISC_SIZE=$(($DISC_SIZE-$BOOT_PART_SIZE))
-        while [ "$SWAP_PART_SET" = "" ]; do
-            DIALOG --inputbox "Enter the size (MB) of your swap partition.  Minimum value is > 0.\n\nDisk space left: $DISC_SIZE MB" 8 65 "256" 2>$ANSWER || return 1
-            SWAP_PART_SIZE=$(cat $ANSWER)
-            if [ "$SWAP_PART_SIZE" = "" -o  "$SWAP_PART_SIZE" -le "0" ]; then
-                DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
-            else
-                if [ "$SWAP_PART_SIZE" -ge "$DISC_SIZE" ]; then
-                    DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
-                else
-                    SWAP_PART_SET=1
-                fi
-            fi
-        done
-        DISC_SIZE=$(($DISC_SIZE-$SWAP_PART_SIZE))
-        while [ "$ROOT_PART_SET" = "" ]; do
-            DIALOG --inputbox "Enter the size (MB) of your / partition.  The /home partition will use the remaining space.\n\nDisk space left:  $DISC_SIZE MB" 8 65 "7500" 2>$ANSWER || return 1
-            ROOT_PART_SIZE=$(cat $ANSWER)
-            if [ "$ROOT_PART_SIZE" = "" -o "$ROOT_PART_SIZE" -le "0" ]; then
-                DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
-            else
-                if [ "$ROOT_PART_SIZE" -ge "$DISC_SIZE" ]; then
-                    DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
-                else
-                    DIALOG --yesno "$(($DISC_SIZE-$ROOT_PART_SIZE)) MB will be used for your /home partition.  Is this OK?" 0 0 && ROOT_PART_SET=1
-                fi
-            fi
-        done
-        while [ "$CHOSEN_FS" = "" ]; do
-            DIALOG --menu "Select a filesystem for / and /home:" 13 45 6 $FSOPTS 2>$ANSWER || return 1
-            FSTYPE=$(cat $ANSWER)
-            DIALOG --yesno "$FSTYPE will be used for / and /home. Is this OK?" 0 0 && CHOSEN_FS=1
-        done
-        SET_DEFAULTFS=1
-    done
-
-    DIALOG --defaultno --yesno "$DISC will be COMPLETELY ERASED!  Are you absolutely sure?" 0 0 \
-    || return 1
-
-    DEVICE=$DISC
-    FSSPECS=$(echo $DEFAULTFS | sed -e "s|/:7500:ext3|/:$ROOT_PART_SIZE:$FSTYPE|g" -e "s|/home:\*:ext3|/home:\*:$FSTYPE|g" -e "s|swap:256|swap:$SWAP_PART_SIZE|g" -e "s|/boot:32|/boot:$BOOT_PART_SIZE|g")
-    sfdisk_input=""
-
-    # we assume a /dev/hdX format (or /dev/sdX)
-    PART_ROOT="${DEVICE}3"
-
-    if [ "$S_MKFS" = "1" ]; then
-        DIALOG --msgbox "You have already prepared your filesystems manually" 0 0
-        return 0
-    fi
-
-    # validate DEVICE
-    if [ ! -b "$DEVICE" ]; then
-      DIALOG --msgbox "Device '$DEVICE' is not valid" 0 0
-      return 1
-    fi
-
-    # validate DEST
-    if [ ! -d "$TARGET_DIR" ]; then
-        DIALOG --msgbox "Destination directory '$TARGET_DIR' is not valid" 0 0
-        return 1
-    fi
-
-    # / required
-    if [ $(echo $FSSPECS | grep '/:' | wc -l) -ne 1 ]; then
-        DIALOG --msgbox "Need exactly one root partition" 0 0
-        return 1
-    fi
-
-    rm -f /tmp/.fstab
-
-    _umountall
-
-    # setup input var for sfdisk
-    for fsspec in $FSSPECS; do
-        fssize=$(echo $fsspec | tr -d ' ' | cut -f2 -d:)
-        if [ "$fssize" = "*" ]; then
-                fssize_spec=';'
-        else
-                fssize_spec=",$fssize"
-        fi
-        fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
-        if [ "$fstype" = "swap" ]; then
-                fstype_spec=",S"
-        else
-                fstype_spec=","
-        fi
-        bootflag=$(echo $fsspec | tr -d ' ' | cut -f4 -d:)
-        if [ "$bootflag" = "+" ]; then
-            bootflag_spec=",*"
-        else
-            bootflag_spec=""
-        fi
-        sfdisk_input="${sfdisk_input}${fssize_spec}${fstype_spec}${bootflag_spec}\n"
-    done
-    sfdisk_input=$(printf "$sfdisk_input")
-
-    # invoke sfdisk
-    printk off
-    DIALOG --infobox "Partitioning $DEVICE" 0 0
-    sfdisk $DEVICE -uM >$LOG 2>&1 <<EOF
-$sfdisk_input
-EOF
-    if [ $? -gt 0 ]; then
-        DIALOG --msgbox "Error partitioning $DEVICE (see $LOG for details)" 0 0
-        printk on
-        return 1
-    fi
-    printk on
-
-    # need to mount root first, then do it again for the others
-    part=1
-    for fsspec in $FSSPECS; do
-        mountpoint=$(echo $fsspec | tr -d ' ' | cut -f1 -d:)
-        fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
-        if echo $mountpoint | tr -d ' ' | grep '^/$' 2>&1 > /dev/null; then
-            _mkfs yes ${DEVICE}${part} "$fstype" "$TARGET_DIR" "$mountpoint" || return 1
-        fi
-        part=$(($part + 1))
-    done
-
-    # make other filesystems
-    part=1
-    for fsspec in $FSSPECS; do
-        mountpoint=$(echo $fsspec | tr -d ' ' | cut -f1 -d:)
-        fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
-        if [ $(echo $mountpoint | tr -d ' ' | grep '^/$' | wc -l) -eq 0 ]; then
-            _mkfs yes ${DEVICE}${part} "$fstype" "$TARGET_DIR" "$mountpoint" || return 1
-        fi
-        part=$(($part + 1))
-    done
-
-    DIALOG --msgbox "Auto-prepare was successful" 0 0
-    S_MKFSAUTO=1
-}
-
-mountpoints() {
-    if [ "$S_MKFSAUTO" = "1" ]; then
-        DIALOG --msgbox "You have already prepared your filesystems with Auto-prepare" 0 0
-        return 0
-    fi
-    while [ "$PARTFINISH" != "DONE" ]; do
-        : >/tmp/.fstab
-        : >/tmp/.parts
-
-        # Determine which filesystems are available
-        FSOPTS="ext2 ext2 ext3 ext3"
-        [ "$(which mkreiserfs 2>/dev/null)" ] && FSOPTS="$FSOPTS reiserfs Reiser3"
-        [ "$(which mkfs.xfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS xfs XFS"
-        [ "$(which mkfs.jfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS jfs JFS"
-        [ "$(which mkfs.vfat 2>/dev/null)" ]  && FSOPTS="$FSOPTS vfat VFAT"
-
-        # Select mountpoints
-        DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
-        PARTS=$(findpartitions _)
-        DIALOG --menu "Select the partition to use as swap" 21 50 13 NONE - $PARTS 2>$ANSWER || return 1
-        PART=$(cat $ANSWER)
-        PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
-        if [ "$PART" != "NONE" ]; then
-            DOMKFS="no"
-            DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
-            echo "$PART:swap:swap:$DOMKFS" >>/tmp/.parts
-        fi
-
-        DIALOG --menu "Select the partition to mount as /" 21 50 13 $PARTS 2>$ANSWER || return 1
-        PART=$(cat $ANSWER)
-        PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
-        PART_ROOT=$PART
-        # Select root filesystem type
-        DIALOG --menu "Select a filesystem for $PART" 13 45 6 $FSOPTS 2>$ANSWER || return 1
-        FSTYPE=$(cat $ANSWER)
-        DOMKFS="no"
-        DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
-        echo "$PART:$FSTYPE:/:$DOMKFS" >>/tmp/.parts
-
-        #
-        # Additional partitions
-        #
-        DIALOG --menu "Select any additional partitions to mount under your new root (select DONE when finished)" 21 50 13 $PARTS DONE _ 2>$ANSWER || return 1
-        PART=$(cat $ANSWER)
-        while [ "$PART" != "DONE" ]; do
-            PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
-            # Select a filesystem type
-            DIALOG --menu "Select a filesystem for $PART" 13 45 6 $FSOPTS 2>$ANSWER || return 1
-            FSTYPE=$(cat $ANSWER)
-            MP=""
-            while [ "${MP}" = "" ]; do
-                DIALOG --inputbox "Enter the mountpoint for $PART" 8 65 "/boot" 2>$ANSWER || return 1
-                MP=$(cat $ANSWER)
-                if grep ":$MP:" /tmp/.parts; then
-                    DIALOG --msgbox "ERROR: You have defined 2 identical mountpoints! Please select another mountpoint." 8 65
-                    MP=""
-                fi
-            done
-            DOMKFS="no"
-            DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
-            echo "$PART:$FSTYPE:$MP:$DOMKFS" >>/tmp/.parts
-            DIALOG --menu "Select any additional partitions to mount under your new root" 21 50 13 $PARTS DONE _ 2>$ANSWER || return 1
-            PART=$(cat $ANSWER)
-        done
-        DIALOG --yesno "Would you like to create and mount the filesytems like this?\n\nSyntax\n------\nDEVICE:TYPE:MOUNTPOINT:FORMAT\n\n$(for i in $(cat /tmp/.parts); do echo "$i\n";done)" 18 0 && PARTFINISH="DONE"
-    done
-
-    _umountall
-
-    for line in $(cat /tmp/.parts); do
-        PART=$(echo $line | cut -d: -f 1)
-        FSTYPE=$(echo $line | cut -d: -f 2)
-        MP=$(echo $line | cut -d: -f 3)
-        DOMKFS=$(echo $line | cut -d: -f 4)
-        umount ${TARGET_DIR}${MP}
-        if [ "$DOMKFS" = "yes" ]; then
-            if [ "$FSTYPE" = "swap" ]; then
-                DIALOG --infobox "Creating and activating swapspace on $PART" 0 0
-            else
-                DIALOG --infobox "Creating $FSTYPE on $PART, mounting to ${TARGET_DIR}${MP}" 0 0
-            fi
-            _mkfs yes $PART $FSTYPE $TARGET_DIR $MP || return 1
-        else
-            if [ "$FSTYPE" = "swap" ]; then
-                DIALOG --infobox "Activating swapspace on $PART" 0 0
-            else
-                DIALOG --infobox "Mounting $PART to ${TARGET_DIR}${MP}" 0 0
-            fi
-            _mkfs no $PART $FSTYPE $TARGET_DIR $MP || return 1
-        fi
-        sleep 1
-    done
-
-    DIALOG --msgbox "Partitions were successfully mounted." 0 0
-    S_MKFS=1
-}
-
-# select_packages()
-# prompts the user to select packages to install
-#
-# params: none
-# returns: 1 on error
-select_packages() {
-    # step dependencies
-    if [ $S_SRC -eq 0 ]; then
-        DIALOG --msgbox "You must select an installation source!" 0 0
-        return 1
-    fi
-
-    # if selection has been done before, warn about loss of input
-    # and let the user exit gracefully
-    if [ $S_SELECT -ne 0 ]; then
-        DIALOG --yesno "WARNING: Running this stage again will result in the loss of previous package selections.\n\nDo you wish to continue?" 10 50 || return 1
-    fi
-
-    DIALOG --msgbox "Package selection is split into two stages.  First you will select package categories that contain packages you may be interested in.  Then you will be presented with a full list of packages for each category, allowing you to fine-tune.\n\n" 15 70
-
-    # set up our install location if necessary and sync up
-    # so we can get package lists
-    prepare_pacman
-    if [ $? -ne 0 ]; then
-        DIALOG --msgbox "Pacman preparation failed! Check $LOG for errors." 6 60
-        return 1
-    fi
-
-    # show group listing for group selection
-    local _catlist="base ^ ON"
-    for i in $($PACMAN -Sg | sed "s/^base$/ /g"); do
-        _catlist="${_catlist} ${i} - OFF"
-    done
-
-    DIALOG --checklist "Select Package Categories\nDO NOT deselect BASE unless you know what you're doing!" 19 55 12 $_catlist 2>$ANSWER || return 1
-    _catlist="$(cat $ANSWER)"
-
-    # assemble a list of packages with groups, marking pre-selected ones
-    # <package> <group> <selected>
-    local _pkgtmp="$($PACMAN -Sl core | awk '{print $2}')"
-    local _pkglist=''
-
-    $PACMAN -Si $_pkgtmp | \
-        awk '/^Name/{ printf("%s ",$3) } /^Group/{ print $3 }' > $ANSWER
-    while read pkgname pkgcat; do
-        # check if this package is in a selected group
-        # slightly ugly but sorting later requires newlines in the variable
-        if [ "${_catlist/"\"$pkgcat\""/XXXX}" != "${_catlist}" ]; then
-            _pkglist="$(echo -e "${_pkglist}\n${pkgname} ${pkgcat} ON")"
-        else
-            _pkglist="$(echo -e "${_pkglist}\n${pkgname} ${pkgcat} OFF")"
-        fi
-    done < $ANSWER
-
-    # sort by category
-    _pkglist="$(echo "$_pkglist" | sort -f -k 2)"
-
-    DIALOG --checklist "Select Packages To Install." 19 60 12 $_pkglist 2>$ANSWER || return 1
-    PACKAGES="$(cat $ANSWER)"
-    S_SELECT=1
-}
-
-
-# donetwork()
-# Hand-hold through setting up networking
-#
-# args: none
-# returns: 1 on failure
-donetwork() {
-    INTERFACE=""
-    S_DHCP=""
-    local ifaces
-    ifaces=$(ifconfig -a |grep "Link encap:Ethernet"|sed 's/ \+Link encap:Ethernet \+HWaddr \+/ /g')
-
-    if [ "$ifaces" = "" ]; then
-        DIALOG --msgbox "Cannot find any ethernet interfaces. This usually means udev was\nunable to load the module and you must do it yourself. Switch to\nanother VT, load the appropriate module, and run this step again." 18 70
-        return 1
-    fi
-
-    DIALOG --nocancel --ok-label "Select" --menu "Select a network interface" 14 55 7 $ifaces 2>$ANSWER
-    case $? in
-        0) INTERFACE=$(cat $ANSWER) ;;
-        *) return 1 ;;
-    esac
-
-    DIALOG --yesno "Do you want to use DHCP?" 0 0
-    if [ $? -eq 0 ]; then
-        DIALOG --infobox "Please wait.  Polling for DHCP server on $INTERFACE..." 0 0
-        dhcpcd $INTERFACE >$LOG 2>&1
-        if [ $? -ne 0 ]; then
-            DIALOG --msgbox "Failed to run dhcpcd.  See $LOG for details." 0 0
-            return 1
-        fi
-        if [ ! $(ifconfig $INTERFACE | grep 'inet addr:') ]; then
-            DIALOG --msgbox "DHCP request failed." 0 0 || return 1
-        fi
-        S_DHCP=1
-    else
-        NETPARAMETERS=""
-        while [ "$NETPARAMETERS" = "" ]; do
-            DIALOG --inputbox "Enter your IP address" 8 65 "192.168.0.2" 2>$ANSWER || return 1
-            IPADDR=$(cat $ANSWER)
-            DIALOG --inputbox "Enter your netmask" 8 65 "255.255.255.0" 2>$ANSWER || return 1
-            SUBNET=$(cat $ANSWER)
-            DIALOG --inputbox "Enter your broadcast" 8 65 "192.168.0.255" 2>$ANSWER || return 1
-            BROADCAST=$(cat $ANSWER)
-            DIALOG --inputbox "Enter your gateway (optional)" 8 65 "192.168.0.1" 2>$ANSWER || return 1
-            GW=$(cat $ANSWER)
-            DIALOG --inputbox "Enter your DNS server IP" 8 65 "192.168.0.1" 2>$ANSWER || return 1
-            DNS=$(cat $ANSWER)
-            DIALOG --inputbox "Enter your HTTP proxy server, for example:\nhttp://name:port\nhttp://ip:port\nhttp://username:password@ip:port\n\n Leave the field empty if no proxy is needed to install." 16 65 "" 2>$ANSWER || return 1
-            PROXY_HTTP=$(cat $ANSWER)
-            DIALOG --inputbox "Enter your FTP proxy server, for example:\nhttp://name:port\nhttp://ip:port\nhttp://username:password@ip:port\n\n Leave the field empty if no proxy is needed to install." 16 65 "" 2>$ANSWER || return 1
-            PROXY_FTP=$(cat $ANSWER)
-            DIALOG --yesno "Are these settings correct?\n\nIP address:         $IPADDR\nNetmask:            $SUBNET\nGateway (optional): $GW\nDNS server:         $DNS\nHTTP proxy server:  $PROXY_HTTP\nFTP proxy server:   $PROXY_FTP" 0 0
-            case $? in
-                1) ;;
-                0) NETPARAMETERS="1" ;;
-            esac
-        done
-        echo "running: ifconfig $INTERFACE $IPADDR netmask $SUBNET broadcast $BROADCAST up" >$LOG
-        ifconfig $INTERFACE $IPADDR netmask $SUBNET broadcast $BROADCAST up >$LOG 2>&1 || DIALOG --msgbox "Failed to setup $INTERFACE interface." 0 0 || return 1
-        if [ "$GW" != "" ]; then
-            route add default gw $GW >$LOG 2>&1 || DIALOG --msgbox "Failed to setup your gateway." 0 0 || return 1
-        fi
-        if [ "$PROXY_HTTP" = "" ]; then
-            unset http_proxy
-        else
-            export http_proxy=$PROXY_HTTP
-        fi
-        if [ "$PROXY_FTP" = "" ]; then
-            unset ftp_proxy
-        else
-            export ftp_proxy=$PROXY_FTP
-        fi
-        echo "nameserver $DNS" >/etc/resolv.conf
-    fi
-    DIALOG --msgbox "The network is configured." 0 0
-    S_NET=1
-}
-
-dogrub() {
-    get_grub_map
-    local grubmenu="$TARGET_DIR/boot/grub/menu.lst"
-    if [ ! -f $grubmenu ]; then
-        DIALOG --msgbox "Error: Couldn't find $grubmenu.  Is GRUB installed?" 0 0
-        return 1
-    fi
-    # try to auto-configure GRUB...
-    if [ "$PART_ROOT" != "" -a "$S_GRUB" != "1" ]; then
-        grubdev=$(mapdev $PART_ROOT)
-        local _rootpart="${PART_ROOT}"
-        local _uuid="$(getuuid ${PART_ROOT})"
-        # attempt to use a UUID if the root device has one
-        if [ -n "${_uuid}" ]; then
-            _rootpart="/dev/disk/by-uuid/${_uuid}"
-        fi
-        # look for a separately-mounted /boot partition
-        bootdev=$(mount | grep $TARGET_DIR/boot | cut -d' ' -f 1)
-        if [ "$grubdev" != "" -o "$bootdev" != "" ]; then
-            subdir=
-            if [ "$bootdev" != "" ]; then
-                grubdev=$(mapdev $bootdev)
-            else
-                subdir="/boot"
-            fi
-            # keep the file from being completely bogus
-            if [ "$grubdev" = "DEVICE NOT FOUND" ]; then
-                DIALOG --msgbox "Your root boot device could not be autodetected by setup.  Ensure you adjust the 'root (hd0,0)' line in your GRUB config accordingly." 0 0
-                grubdev="(hd0,0)"
-            fi
-            # remove default entries by truncating file at our little tag (#-*)
-            sed -i -e '/#-\*/q'
-            cat >>$grubmenu <<EOF
-
-# (0) Arch Linux
-title  Arch Linux
-root   $grubdev
-kernel $subdir/vmlinuz26 root=${_rootpart} ro
-initrd $subdir/kernel26.img
-
-# (1) Arch Linux
-title  Arch Linux Fallback
-root   $grubdev
-kernel $subdir/vmlinuz26 root=${_rootpart} ro
-initrd $subdir/kernel26-fallback.img
-
-# (2) Windows
-#title Windows
-#rootnoverify (hd0,0)
-#makeactive
-#chainloader +1
-EOF
-        fi
-    fi
-
-    DIALOG --msgbox "Before installing GRUB, you must review the configuration file.  You will now be put into the editor.  After you save your changes and exit the editor, you can install GRUB." 0 0
-    [ "$EDITOR" ] || geteditor
-    $EDITOR $grubmenu
-
-    DEVS=$(finddisks _)
-    DEVS="$DEVS $(findpartitions _)"
-    if [ "$DEVS" = "" ]; then
-        DIALOG --msgbox "No hard drives were found" 0 0
-        return 1
-    fi
-    DIALOG --menu "Select the boot device where the GRUB bootloader will be installed (usually the MBR and not a partition)." 14 55 7 $DEVS 2>$ANSWER || return 1
-    ROOTDEV=$(cat $ANSWER)
-    DIALOG --infobox "Installing the GRUB bootloader..." 0 0
-    cp -a $TARGET_DIR/usr/lib/grub/i386-pc/* $TARGET_DIR/boot/grub/
-    sync
-    # freeze xfs filesystems to enable grub installation on xfs filesystems
-    if [ -x /usr/sbin/xfs_freeze ]; then
-        /usr/sbin/xfs_freeze -f $TARGET_DIR/boot > /dev/null 2>&1
-        /usr/sbin/xfs_freeze -f $TARGET_DIR/ > /dev/null 2>&1
-    fi
-    # look for a separately-mounted /boot partition
-    bootpart=$(mount | grep $TARGET_DIR/boot | cut -d' ' -f 1)
-    if [ "$bootpart" = "" ]; then
-        if [ "$PART_ROOT" = "" ]; then
-            DIALOG --inputbox "Enter the full path to your root device" 8 65 "/dev/sda3" 2>$ANSWER || return 1
-            bootpart=$(cat $ANSWER)
-        else
-            bootpart=$PART_ROOT
-        fi
-    fi
-    DIALOG --defaultno --yesno "Do you have your system installed on software raid?\nAnswer 'YES' to install grub to another hard disk." 0 0
-    if [ $? -eq 0 ]; then
-        DIALOG --menu "Please select the boot partition device, this cannot be autodetected!\nPlease redo grub installation for all partitions you need it!" 14 55 7 $DEVS 2>$ANSWER || return 1
-        bootpart=$(cat $ANSWER)
-    fi
-    bootpart=$(mapdev $bootpart)
-    bootdev=$(mapdev $ROOTDEV)
-    if [ "$bootpart" = "" ]; then
-        DIALOG --msgbox "Error: Missing/Invalid root device: $bootpart" 0 0
-        return 1
-    fi
-    if [ "$bootpart" = "DEVICE NOT FOUND" -o "$bootdev" = "DEVICE NOT FOUND" ]; then
-        DIALOG --msgbox "GRUB root and setup devices could not be auto-located.  You will need to manually run the GRUB shell to install a bootloader." 0 0
-        return 1
-    fi
-    $TARGET_DIR/sbin/grub --no-floppy --batch >/tmp/grub.log 2>&1 <<EOF
-root $bootpart
-setup $bootdev
-quit
-EOF
-    cat /tmp/grub.log >$LOG
-    # unfreeze xfs filesystems
-    if [ -x /usr/sbin/xfs_freeze ]; then
-        /usr/sbin/xfs_freeze -u $TARGET_DIR/boot > /dev/null 2>&1
-        /usr/sbin/xfs_freeze -u $TARGET_DIR/ > /dev/null 2>&1
-    fi
-
-    if grep "Error [0-9]*: " /tmp/grub.log >/dev/null; then
-        DIALOG --msgbox "Error installing GRUB. (see $LOG for output)" 0 0
-        return 1
-    fi
-    DIALOG --msgbox "GRUB was successfully installed." 0 0
-    S_GRUB=1
-}
-
diff --git a/src/profiles/profile-interactive-DRAFT.sh b/src/profiles/profile-interactive-DRAFT.sh
index f94853f..b4f281d 100644
--- a/src/profiles/profile-interactive-DRAFT.sh
+++ b/src/profiles/profile-interactive-DRAFT.sh
@@ -271,6 +271,536 @@ notify "Writing base configuration..."
 auto_fstab
 auto_network
 auto_locale 
+
+autoprepare()
+{
+    DISCS=$(finddisks)
+    if [ $(echo $DISCS | wc -w) -gt 1 ]; then
+        DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
+        DIALOG --menu "Select the hard drive to use" 14 55 7 $(finddisks _) 2>$ANSWER || return 1
+        DISC=$(cat $ANSWER)
+    else
+        DISC=$DISCS
+    fi
+    SET_DEFAULTFS=""
+    BOOT_PART_SET=""
+    SWAP_PART_SET=""
+    ROOT_PART_SET=""
+    CHOSEN_FS=""
+    # get just the disk size in 1000*1000 MB
+    DISC_SIZE=$(hdparm -I /dev/sda | grep -F '1000*1000' | sed "s/^.*:[ \t]*\([0-9]*\) MBytes.*$/\1/")
+    while [ "$SET_DEFAULTFS" = "" ]; do
+        FSOPTS="ext2 ext2 ext3 ext3"
+        [ "$(which mkreiserfs 2>/dev/null)" ] && FSOPTS="$FSOPTS reiserfs Reiser3"
+        [ "$(which mkfs.xfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS xfs XFS"
+        [ "$(which mkfs.jfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS jfs JFS"
+        while [ "$BOOT_PART_SET" = "" ]; do
+            DIALOG --inputbox "Enter the size (MB) of your /boot partition.  Minimum value is 16.\n\nDisk space left: $DISC_SIZE MB" 8 65 "32" 2>$ANSWER || return 1
+            BOOT_PART_SIZE="$(cat $ANSWER)"
+            if [ "$BOOT_PART_SIZE" = "" ]; then
+                DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
+            else
+                if [ "$BOOT_PART_SIZE" -ge "$DISC_SIZE" -o "$BOOT_PART_SIZE" -lt "16" -o "$SBOOT_PART_SIZE" = "$DISC_SIZE" ]; then
+                    DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
+                else
+                    BOOT_PART_SET=1
+                fi
+            fi
+        done
+        DISC_SIZE=$(($DISC_SIZE-$BOOT_PART_SIZE))
+        while [ "$SWAP_PART_SET" = "" ]; do
+            DIALOG --inputbox "Enter the size (MB) of your swap partition.  Minimum value is > 0.\n\nDisk space left: $DISC_SIZE MB" 8 65 "256" 2>$ANSWER || return 1
+            SWAP_PART_SIZE=$(cat $ANSWER)
+            if [ "$SWAP_PART_SIZE" = "" -o  "$SWAP_PART_SIZE" -le "0" ]; then
+                DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
+            else
+                if [ "$SWAP_PART_SIZE" -ge "$DISC_SIZE" ]; then
+                    DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
+                else
+                    SWAP_PART_SET=1
+                fi
+            fi
+        done
+        DISC_SIZE=$(($DISC_SIZE-$SWAP_PART_SIZE))
+        while [ "$ROOT_PART_SET" = "" ]; do
+            DIALOG --inputbox "Enter the size (MB) of your / partition.  The /home partition will use the remaining space.\n\nDisk space left:  $DISC_SIZE MB" 8 65 "7500" 2>$ANSWER || return 1
+            ROOT_PART_SIZE=$(cat $ANSWER)
+            if [ "$ROOT_PART_SIZE" = "" -o "$ROOT_PART_SIZE" -le "0" ]; then
+                DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
+            else
+                if [ "$ROOT_PART_SIZE" -ge "$DISC_SIZE" ]; then
+                    DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
+                else
+                    DIALOG --yesno "$(($DISC_SIZE-$ROOT_PART_SIZE)) MB will be used for your /home partition.  Is this OK?" 0 0 && ROOT_PART_SET=1
+                fi
+            fi
+        done
+        while [ "$CHOSEN_FS" = "" ]; do
+            DIALOG --menu "Select a filesystem for / and /home:" 13 45 6 $FSOPTS 2>$ANSWER || return 1
+            FSTYPE=$(cat $ANSWER)
+            DIALOG --yesno "$FSTYPE will be used for / and /home. Is this OK?" 0 0 && CHOSEN_FS=1
+        done
+        SET_DEFAULTFS=1
+    done
+
+    DIALOG --defaultno --yesno "$DISC will be COMPLETELY ERASED!  Are you absolutely sure?" 0 0 \
+    || return 1
+
+    DEVICE=$DISC
+    FSSPECS=$(echo $DEFAULTFS | sed -e "s|/:7500:ext3|/:$ROOT_PART_SIZE:$FSTYPE|g" -e "s|/home:\*:ext3|/home:\*:$FSTYPE|g" -e "s|swap:256|swap:$SWAP_PART_SIZE|g" -e "s|/boot:32|/boot:$BOOT_PART_SIZE|g")
+    sfdisk_input=""
+
+    # we assume a /dev/hdX format (or /dev/sdX)
+    PART_ROOT="${DEVICE}3"
+
+    if [ "$S_MKFS" = "1" ]; then
+        DIALOG --msgbox "You have already prepared your filesystems manually" 0 0
+        return 0
+    fi
+
+    # validate DEVICE
+    if [ ! -b "$DEVICE" ]; then
+      DIALOG --msgbox "Device '$DEVICE' is not valid" 0 0
+      return 1
+    fi
+
+    # validate DEST
+    if [ ! -d "$TARGET_DIR" ]; then
+        DIALOG --msgbox "Destination directory '$TARGET_DIR' is not valid" 0 0
+        return 1
+    fi
+
+    # / required
+    if [ $(echo $FSSPECS | grep '/:' | wc -l) -ne 1 ]; then
+        DIALOG --msgbox "Need exactly one root partition" 0 0
+        return 1
+    fi
+
+    rm -f /tmp/.fstab
+
+    _umountall
+
+    # setup input var for sfdisk
+    for fsspec in $FSSPECS; do
+        fssize=$(echo $fsspec | tr -d ' ' | cut -f2 -d:)
+        if [ "$fssize" = "*" ]; then
+                fssize_spec=';'
+        else
+                fssize_spec=",$fssize"
+        fi
+        fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
+        if [ "$fstype" = "swap" ]; then
+                fstype_spec=",S"
+        else
+                fstype_spec=","
+        fi
+        bootflag=$(echo $fsspec | tr -d ' ' | cut -f4 -d:)
+        if [ "$bootflag" = "+" ]; then
+            bootflag_spec=",*"
+        else
+            bootflag_spec=""
+        fi
+        sfdisk_input="${sfdisk_input}${fssize_spec}${fstype_spec}${bootflag_spec}\n"
+    done
+    sfdisk_input=$(printf "$sfdisk_input")
+
+    # invoke sfdisk
+    printk off
+    DIALOG --infobox "Partitioning $DEVICE" 0 0
+    sfdisk $DEVICE -uM >$LOG 2>&1 <<EOF
+$sfdisk_input
+EOF
+    if [ $? -gt 0 ]; then
+        DIALOG --msgbox "Error partitioning $DEVICE (see $LOG for details)" 0 0
+        printk on
+        return 1
+    fi
+    printk on
+
+    # need to mount root first, then do it again for the others
+    part=1
+    for fsspec in $FSSPECS; do
+        mountpoint=$(echo $fsspec | tr -d ' ' | cut -f1 -d:)
+        fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
+        if echo $mountpoint | tr -d ' ' | grep '^/$' 2>&1 > /dev/null; then
+            _mkfs yes ${DEVICE}${part} "$fstype" "$TARGET_DIR" "$mountpoint" || return 1
+        fi
+        part=$(($part + 1))
+    done
+
+    # make other filesystems
+    part=1
+    for fsspec in $FSSPECS; do
+        mountpoint=$(echo $fsspec | tr -d ' ' | cut -f1 -d:)
+        fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
+        if [ $(echo $mountpoint | tr -d ' ' | grep '^/$' | wc -l) -eq 0 ]; then
+            _mkfs yes ${DEVICE}${part} "$fstype" "$TARGET_DIR" "$mountpoint" || return 1
+        fi
+        part=$(($part + 1))
+    done
+
+    DIALOG --msgbox "Auto-prepare was successful" 0 0
+    S_MKFSAUTO=1
+}
+
+mountpoints() {
+    if [ "$S_MKFSAUTO" = "1" ]; then
+        DIALOG --msgbox "You have already prepared your filesystems with Auto-prepare" 0 0
+        return 0
+    fi
+    while [ "$PARTFINISH" != "DONE" ]; do
+        : >/tmp/.fstab
+        : >/tmp/.parts
+
+        # Determine which filesystems are available
+        FSOPTS="ext2 ext2 ext3 ext3"
+        [ "$(which mkreiserfs 2>/dev/null)" ] && FSOPTS="$FSOPTS reiserfs Reiser3"
+        [ "$(which mkfs.xfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS xfs XFS"
+        [ "$(which mkfs.jfs 2>/dev/null)" ]   && FSOPTS="$FSOPTS jfs JFS"
+        [ "$(which mkfs.vfat 2>/dev/null)" ]  && FSOPTS="$FSOPTS vfat VFAT"
+
+        # Select mountpoints
+        DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
+        PARTS=$(findpartitions _)
+        DIALOG --menu "Select the partition to use as swap" 21 50 13 NONE - $PARTS 2>$ANSWER || return 1
+        PART=$(cat $ANSWER)
+        PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
+        if [ "$PART" != "NONE" ]; then
+            DOMKFS="no"
+            DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
+            echo "$PART:swap:swap:$DOMKFS" >>/tmp/.parts
+        fi
+
+        DIALOG --menu "Select the partition to mount as /" 21 50 13 $PARTS 2>$ANSWER || return 1
+        PART=$(cat $ANSWER)
+        PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
+        PART_ROOT=$PART
+        # Select root filesystem type
+        DIALOG --menu "Select a filesystem for $PART" 13 45 6 $FSOPTS 2>$ANSWER || return 1
+        FSTYPE=$(cat $ANSWER)
+        DOMKFS="no"
+        DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
+        echo "$PART:$FSTYPE:/:$DOMKFS" >>/tmp/.parts
+
+        #
+        # Additional partitions
+        #
+        DIALOG --menu "Select any additional partitions to mount under your new root (select DONE when finished)" 21 50 13 $PARTS DONE _ 2>$ANSWER || return 1
+        PART=$(cat $ANSWER)
+        while [ "$PART" != "DONE" ]; do
+            PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
+            # Select a filesystem type
+            DIALOG --menu "Select a filesystem for $PART" 13 45 6 $FSOPTS 2>$ANSWER || return 1
+            FSTYPE=$(cat $ANSWER)
+            MP=""
+            while [ "${MP}" = "" ]; do
+                DIALOG --inputbox "Enter the mountpoint for $PART" 8 65 "/boot" 2>$ANSWER || return 1
+                MP=$(cat $ANSWER)
+                if grep ":$MP:" /tmp/.parts; then
+                    DIALOG --msgbox "ERROR: You have defined 2 identical mountpoints! Please select another mountpoint." 8 65
+                    MP=""
+                fi
+            done
+            DOMKFS="no"
+            DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
+            echo "$PART:$FSTYPE:$MP:$DOMKFS" >>/tmp/.parts
+            DIALOG --menu "Select any additional partitions to mount under your new root" 21 50 13 $PARTS DONE _ 2>$ANSWER || return 1
+            PART=$(cat $ANSWER)
+        done
+        DIALOG --yesno "Would you like to create and mount the filesytems like this?\n\nSyntax\n------\nDEVICE:TYPE:MOUNTPOINT:FORMAT\n\n$(for i in $(cat /tmp/.parts); do echo "$i\n";done)" 18 0 && PARTFINISH="DONE"
+    done
+
+    _umountall
+
+    for line in $(cat /tmp/.parts); do
+        PART=$(echo $line | cut -d: -f 1)
+        FSTYPE=$(echo $line | cut -d: -f 2)
+        MP=$(echo $line | cut -d: -f 3)
+        DOMKFS=$(echo $line | cut -d: -f 4)
+        umount ${TARGET_DIR}${MP}
+        if [ "$DOMKFS" = "yes" ]; then
+            if [ "$FSTYPE" = "swap" ]; then
+                DIALOG --infobox "Creating and activating swapspace on $PART" 0 0
+            else
+                DIALOG --infobox "Creating $FSTYPE on $PART, mounting to ${TARGET_DIR}${MP}" 0 0
+            fi
+            _mkfs yes $PART $FSTYPE $TARGET_DIR $MP || return 1
+        else
+            if [ "$FSTYPE" = "swap" ]; then
+                DIALOG --infobox "Activating swapspace on $PART" 0 0
+            else
+                DIALOG --infobox "Mounting $PART to ${TARGET_DIR}${MP}" 0 0
+            fi
+            _mkfs no $PART $FSTYPE $TARGET_DIR $MP || return 1
+        fi
+        sleep 1
+    done
+
+    DIALOG --msgbox "Partitions were successfully mounted." 0 0
+    S_MKFS=1
+}
+
+# select_packages()
+# prompts the user to select packages to install
+#
+# params: none
+# returns: 1 on error
+select_packages() {
+    # step dependencies
+    if [ $S_SRC -eq 0 ]; then
+        DIALOG --msgbox "You must select an installation source!" 0 0
+        return 1
+    fi
+
+    # if selection has been done before, warn about loss of input
+    # and let the user exit gracefully
+    if [ $S_SELECT -ne 0 ]; then
+        DIALOG --yesno "WARNING: Running this stage again will result in the loss of previous package selections.\n\nDo you wish to continue?" 10 50 || return 1
+    fi
+
+    DIALOG --msgbox "Package selection is split into two stages.  First you will select package categories that contain packages you may be interested in.  Then you will be presented with a full list of packages for each category, allowing you to fine-tune.\n\n" 15 70
+
+    # set up our install location if necessary and sync up
+    # so we can get package lists
+    prepare_pacman
+    if [ $? -ne 0 ]; then
+        DIALOG --msgbox "Pacman preparation failed! Check $LOG for errors." 6 60
+        return 1
+    fi
+
+    # show group listing for group selection
+    local _catlist="base ^ ON"
+    for i in $($PACMAN -Sg | sed "s/^base$/ /g"); do
+        _catlist="${_catlist} ${i} - OFF"
+    done
+
+    DIALOG --checklist "Select Package Categories\nDO NOT deselect BASE unless you know what you're doing!" 19 55 12 $_catlist 2>$ANSWER || return 1
+    _catlist="$(cat $ANSWER)"
+
+    # assemble a list of packages with groups, marking pre-selected ones
+    # <package> <group> <selected>
+    local _pkgtmp="$($PACMAN -Sl core | awk '{print $2}')"
+    local _pkglist=''
+
+    $PACMAN -Si $_pkgtmp | \
+        awk '/^Name/{ printf("%s ",$3) } /^Group/{ print $3 }' > $ANSWER
+    while read pkgname pkgcat; do
+        # check if this package is in a selected group
+        # slightly ugly but sorting later requires newlines in the variable
+        if [ "${_catlist/"\"$pkgcat\""/XXXX}" != "${_catlist}" ]; then
+            _pkglist="$(echo -e "${_pkglist}\n${pkgname} ${pkgcat} ON")"
+        else
+            _pkglist="$(echo -e "${_pkglist}\n${pkgname} ${pkgcat} OFF")"
+        fi
+    done < $ANSWER
+
+    # sort by category
+    _pkglist="$(echo "$_pkglist" | sort -f -k 2)"
+
+    DIALOG --checklist "Select Packages To Install." 19 60 12 $_pkglist 2>$ANSWER || return 1
+    PACKAGES="$(cat $ANSWER)"
+    S_SELECT=1
+}
+
+
+# donetwork()
+# Hand-hold through setting up networking
+#
+# args: none
+# returns: 1 on failure
+donetwork() {
+    INTERFACE=""
+    S_DHCP=""
+    local ifaces
+    ifaces=$(ifconfig -a |grep "Link encap:Ethernet"|sed 's/ \+Link encap:Ethernet \+HWaddr \+/ /g')
+
+    if [ "$ifaces" = "" ]; then
+        DIALOG --msgbox "Cannot find any ethernet interfaces. This usually means udev was\nunable to load the module and you must do it yourself. Switch to\nanother VT, load the appropriate module, and run this step again." 18 70
+        return 1
+    fi
+
+    DIALOG --nocancel --ok-label "Select" --menu "Select a network interface" 14 55 7 $ifaces 2>$ANSWER
+    case $? in
+        0) INTERFACE=$(cat $ANSWER) ;;
+        *) return 1 ;;
+    esac
+
+    DIALOG --yesno "Do you want to use DHCP?" 0 0
+    if [ $? -eq 0 ]; then
+        DIALOG --infobox "Please wait.  Polling for DHCP server on $INTERFACE..." 0 0
+        dhcpcd $INTERFACE >$LOG 2>&1
+        if [ $? -ne 0 ]; then
+            DIALOG --msgbox "Failed to run dhcpcd.  See $LOG for details." 0 0
+            return 1
+        fi
+        if [ ! $(ifconfig $INTERFACE | grep 'inet addr:') ]; then
+            DIALOG --msgbox "DHCP request failed." 0 0 || return 1
+        fi
+        S_DHCP=1
+    else
+        NETPARAMETERS=""
+        while [ "$NETPARAMETERS" = "" ]; do
+            DIALOG --inputbox "Enter your IP address" 8 65 "192.168.0.2" 2>$ANSWER || return 1
+            IPADDR=$(cat $ANSWER)
+            DIALOG --inputbox "Enter your netmask" 8 65 "255.255.255.0" 2>$ANSWER || return 1
+            SUBNET=$(cat $ANSWER)
+            DIALOG --inputbox "Enter your broadcast" 8 65 "192.168.0.255" 2>$ANSWER || return 1
+            BROADCAST=$(cat $ANSWER)
+            DIALOG --inputbox "Enter your gateway (optional)" 8 65 "192.168.0.1" 2>$ANSWER || return 1
+            GW=$(cat $ANSWER)
+            DIALOG --inputbox "Enter your DNS server IP" 8 65 "192.168.0.1" 2>$ANSWER || return 1
+            DNS=$(cat $ANSWER)
+            DIALOG --inputbox "Enter your HTTP proxy server, for example:\nhttp://name:port\nhttp://ip:port\nhttp://username:password@ip:port\n\n Leave the field empty if no proxy is needed to install." 16 65 "" 2>$ANSWER || return 1
+            PROXY_HTTP=$(cat $ANSWER)
+            DIALOG --inputbox "Enter your FTP proxy server, for example:\nhttp://name:port\nhttp://ip:port\nhttp://username:password@ip:port\n\n Leave the field empty if no proxy is needed to install." 16 65 "" 2>$ANSWER || return 1
+            PROXY_FTP=$(cat $ANSWER)
+            DIALOG --yesno "Are these settings correct?\n\nIP address:         $IPADDR\nNetmask:            $SUBNET\nGateway (optional): $GW\nDNS server:         $DNS\nHTTP proxy server:  $PROXY_HTTP\nFTP proxy server:   $PROXY_FTP" 0 0
+            case $? in
+                1) ;;
+                0) NETPARAMETERS="1" ;;
+            esac
+        done
+        echo "running: ifconfig $INTERFACE $IPADDR netmask $SUBNET broadcast $BROADCAST up" >$LOG
+        ifconfig $INTERFACE $IPADDR netmask $SUBNET broadcast $BROADCAST up >$LOG 2>&1 || DIALOG --msgbox "Failed to setup $INTERFACE interface." 0 0 || return 1
+        if [ "$GW" != "" ]; then
+            route add default gw $GW >$LOG 2>&1 || DIALOG --msgbox "Failed to setup your gateway." 0 0 || return 1
+        fi
+        if [ "$PROXY_HTTP" = "" ]; then
+            unset http_proxy
+        else
+            export http_proxy=$PROXY_HTTP
+        fi
+        if [ "$PROXY_FTP" = "" ]; then
+            unset ftp_proxy
+        else
+            export ftp_proxy=$PROXY_FTP
+        fi
+        echo "nameserver $DNS" >/etc/resolv.conf
+    fi
+    DIALOG --msgbox "The network is configured." 0 0
+    S_NET=1
+}
+
+dogrub() {
+    get_grub_map
+    local grubmenu="$TARGET_DIR/boot/grub/menu.lst"
+    if [ ! -f $grubmenu ]; then
+        DIALOG --msgbox "Error: Couldn't find $grubmenu.  Is GRUB installed?" 0 0
+        return 1
+    fi
+    # try to auto-configure GRUB...
+    if [ "$PART_ROOT" != "" -a "$S_GRUB" != "1" ]; then
+        grubdev=$(mapdev $PART_ROOT)
+        local _rootpart="${PART_ROOT}"
+        local _uuid="$(getuuid ${PART_ROOT})"
+        # attempt to use a UUID if the root device has one
+        if [ -n "${_uuid}" ]; then
+            _rootpart="/dev/disk/by-uuid/${_uuid}"
+        fi
+        # look for a separately-mounted /boot partition
+        bootdev=$(mount | grep $TARGET_DIR/boot | cut -d' ' -f 1)
+        if [ "$grubdev" != "" -o "$bootdev" != "" ]; then
+            subdir=
+            if [ "$bootdev" != "" ]; then
+                grubdev=$(mapdev $bootdev)
+            else
+                subdir="/boot"
+            fi
+            # keep the file from being completely bogus
+            if [ "$grubdev" = "DEVICE NOT FOUND" ]; then
+                DIALOG --msgbox "Your root boot device could not be autodetected by setup.  Ensure you adjust the 'root (hd0,0)' line in your GRUB config accordingly." 0 0
+                grubdev="(hd0,0)"
+            fi
+            # remove default entries by truncating file at our little tag (#-*)
+            sed -i -e '/#-\*/q'
+            cat >>$grubmenu <<EOF
+
+# (0) Arch Linux
+title  Arch Linux
+root   $grubdev
+kernel $subdir/vmlinuz26 root=${_rootpart} ro
+initrd $subdir/kernel26.img
+
+# (1) Arch Linux
+title  Arch Linux Fallback
+root   $grubdev
+kernel $subdir/vmlinuz26 root=${_rootpart} ro
+initrd $subdir/kernel26-fallback.img
+
+# (2) Windows
+#title Windows
+#rootnoverify (hd0,0)
+#makeactive
+#chainloader +1
+EOF
+        fi
+    fi
+
+    DIALOG --msgbox "Before installing GRUB, you must review the configuration file.  You will now be put into the editor.  After you save your changes and exit the editor, you can install GRUB." 0 0
+    [ "$EDITOR" ] || geteditor
+    $EDITOR $grubmenu
+
+    DEVS=$(finddisks _)
+    DEVS="$DEVS $(findpartitions _)"
+    if [ "$DEVS" = "" ]; then
+        DIALOG --msgbox "No hard drives were found" 0 0
+        return 1
+    fi
+    DIALOG --menu "Select the boot device where the GRUB bootloader will be installed (usually the MBR and not a partition)." 14 55 7 $DEVS 2>$ANSWER || return 1
+    ROOTDEV=$(cat $ANSWER)
+    DIALOG --infobox "Installing the GRUB bootloader..." 0 0
+    cp -a $TARGET_DIR/usr/lib/grub/i386-pc/* $TARGET_DIR/boot/grub/
+    sync
+    # freeze xfs filesystems to enable grub installation on xfs filesystems
+    if [ -x /usr/sbin/xfs_freeze ]; then
+        /usr/sbin/xfs_freeze -f $TARGET_DIR/boot > /dev/null 2>&1
+        /usr/sbin/xfs_freeze -f $TARGET_DIR/ > /dev/null 2>&1
+    fi
+    # look for a separately-mounted /boot partition
+    bootpart=$(mount | grep $TARGET_DIR/boot | cut -d' ' -f 1)
+    if [ "$bootpart" = "" ]; then
+        if [ "$PART_ROOT" = "" ]; then
+            DIALOG --inputbox "Enter the full path to your root device" 8 65 "/dev/sda3" 2>$ANSWER || return 1
+            bootpart=$(cat $ANSWER)
+        else
+            bootpart=$PART_ROOT
+        fi
+    fi
+    DIALOG --defaultno --yesno "Do you have your system installed on software raid?\nAnswer 'YES' to install grub to another hard disk." 0 0
+    if [ $? -eq 0 ]; then
+        DIALOG --menu "Please select the boot partition device, this cannot be autodetected!\nPlease redo grub installation for all partitions you need it!" 14 55 7 $DEVS 2>$ANSWER || return 1
+        bootpart=$(cat $ANSWER)
+    fi
+    bootpart=$(mapdev $bootpart)
+    bootdev=$(mapdev $ROOTDEV)
+    if [ "$bootpart" = "" ]; then
+        DIALOG --msgbox "Error: Missing/Invalid root device: $bootpart" 0 0
+        return 1
+    fi
+    if [ "$bootpart" = "DEVICE NOT FOUND" -o "$bootdev" = "DEVICE NOT FOUND" ]; then
+        DIALOG --msgbox "GRUB root and setup devices could not be auto-located.  You will need to manually run the GRUB shell to install a bootloader." 0 0
+        return 1
+    fi
+    $TARGET_DIR/sbin/grub --no-floppy --batch >/tmp/grub.log 2>&1 <<EOF
+root $bootpart
+setup $bootdev
+quit
+EOF
+    cat /tmp/grub.log >$LOG
+    # unfreeze xfs filesystems
+    if [ -x /usr/sbin/xfs_freeze ]; then
+        /usr/sbin/xfs_freeze -u $TARGET_DIR/boot > /dev/null 2>&1
+        /usr/sbin/xfs_freeze -u $TARGET_DIR/ > /dev/null 2>&1
+    fi
+
+    if grep "Error [0-9]*: " /tmp/grub.log >/dev/null; then
+        DIALOG --msgbox "Error installing GRUB. (see $LOG for output)" 0 0
+        return 1
+    fi
+    DIALOG --msgbox "GRUB was successfully installed." 0 0
+    S_GRUB=1
+}
+
         
 #####################
 ## begin execution ##