diff options
-rw-r--r-- | src/lib/lib-blockdevices-filesystems.sh | 17 | ||||
-rw-r--r-- | src/lib/lib-network.sh | 38 | ||||
-rw-r--r-- | src/lib/lib-pacman.sh | 108 | ||||
-rw-r--r-- | src/lib/lib-software.sh | 47 | ||||
-rw-r--r-- | src/lib/lib-ui.sh | 11 | ||||
-rw-r--r-- | src/lib/setup_TOPROCESS | 397 | ||||
-rw-r--r-- | src/profiles/profile-interactive-DRAFT.sh | 164 |
7 files changed, 382 insertions, 400 deletions
diff --git a/src/lib/lib-blockdevices-filesystems.sh b/src/lib/lib-blockdevices-filesystems.sh index 101b737..b441a5e 100644 --- a/src/lib/lib-blockdevices-filesystems.sh +++ b/src/lib/lib-blockdevices-filesystems.sh @@ -260,3 +260,20 @@ _mkfs() { fi } + +# auto_fstab(). taken from setup +# preprocess fstab file +# comments out old fields and inserts new ones +# according to partitioning/formatting stage +# +auto_fstab() +{ + if [ "$S_MKFS" = "1" -o "$S_MKFSAUTO" = "1" ]; then + if [ -f /tmp/.fstab ]; then + # comment out stray /dev entries + sed -i 's/^\/dev/#\/dev/g' $TARGET_DIR/etc/fstab + # append entries from new configuration + sort /tmp/.fstab >>$TARGET_DIR/etc/fstab + fi + fi +} diff --git a/src/lib/lib-network.sh b/src/lib/lib-network.sh new file mode 100644 index 0000000..5e6652d --- /dev/null +++ b/src/lib/lib-network.sh @@ -0,0 +1,38 @@ +#!/bin/bash + +# auto_network(). taken from setup +# configures network on host system according to installer +# settings if user wishes to do so +# +auto_network() +{ + # exit if network wasn't configured in installer + if [ $S_NET -eq 0 ]; then + return 1 + fi + + ask_yesno "Do you want to use the network settings from the installer in rc.conf and resolv.conf?\n\nIf you used Proxy settings, they will be written to /etc/profile.d/proxy.sh" || return 1 + + if [ $S_DHCP -ne 1 ]; then + sed -i "s#eth0=\"eth0#$INTERFACE=\"$INTERFACE#g" ${TARGET_DIR}/etc/rc.conf + sed -i "s# 192.168.0.2 # $IPADDR #g" ${TARGET_DIR}/etc/rc.conf + sed -i "s# 255.255.255.0 # $SUBNET #g" ${TARGET_DIR}/etc/rc.conf + sed -i "s# 192.168.0.255\"# $BROADCAST\"#g" ${TARGET_DIR}/etc/rc.conf + sed -i "s#eth0)#$INTERFACE)#g" ${TARGET_DIR}/etc/rc.conf + if [ "$GW" != "" ]; then + sed -i "s#gw 192.168.0.1#gw $GW#g" ${TARGET_DIR}/etc/rc.conf + sed -i "s#!gateway#gateway#g" ${TARGET_DIR}/etc/rc.conf + fi + echo "nameserver $DNS" >> ${TARGET_DIR}/etc/resolv.conf + else + sed -i "s#eth0=\"eth0.*#$INTERFACE=\"dhcp\"#g" ${TARGET_DIR}/etc/rc.conf + fi + if [ "$PROXY_HTTP" != "" ]; then + notify "export http_proxy=$PROXY_HTTP" >> ${TARGET_DIR}/etc/profile.d/proxy.sh; + chmod a+x ${TARGET_DIR}/etc/profile.d/proxy.sh + fi + if [ "$PROXY_FTP" != "" ]; then + notify "export ftp_proxy=$PROXY_FTP" >> ${TARGET_DIR}/etc/profile.d/proxy.sh; + chmod a+x ${TARGET_DIR}/etc/profile.d/proxy.sh + fi +} diff --git a/src/lib/lib-pacman.sh b/src/lib/lib-pacman.sh index bfc0adb..fc3fce0 100644 --- a/src/lib/lib-pacman.sh +++ b/src/lib/lib-pacman.sh @@ -53,6 +53,35 @@ target_write_pacman_conf () } +# target_prepare_pacman() taken from setup. modified a bit +# configures pacman and syncs for the first time on destination system +# +# params: none +# returns: 1 on error +target_prepare_pacman() { + [ "$var_PKG_SOURCE_TYPE" = "cd" ] && local serverurl="${FILE_URL}" + [ "$var_PKG_SOURCE_TYPE" = "ftp" ] && local serverurl="${SYNC_URL}" + + # Setup a pacman.conf in /tmp + cat << EOF > /tmp/pacman.conf +[options] +CacheDir = ${TARGET_DIR}/var/cache/pacman/pkg +CacheDir = /src/core/pkg + +[core] +Server = ${serverurl} +EOF + + # Set up the necessary directories for pacman use + [ ! -d "${TARGET_DIR}/var/cache/pacman/pkg" ] && mkdir -m 755 -p "${TARGET_DIR}/var/cache/pacman/pkg" + [ ! -d "${TARGET_DIR}/var/lib/pacman" ] && mkdir -m 755 -p "${TARGET_DIR}/var/lib/pacman" + + notify "Refreshing package database..." + $PACMAN_TARGET -Sy >$LOG 2>&1 || return 1 + return 0 +} + + # taken from quickinst. TODO: figure this one out pacman_what_is_this_for () { @@ -67,3 +96,82 @@ pacman_what_is_this_for () ! [ -d /var/lib/pacman ] && mkdir -p /var/lib/pacman } + + +# select_mirror(). taken from setup. TODO: get the UI code out of here +# Prompt user for preferred mirror and set $SYNC_URL +# +# args: none +# returns: nothing +select_mirror() { + notify "Keep in mind ftp.archlinux.org is throttled.\nPlease select another mirror to get full download speed." + # FIXME: this regex doesn't honor commenting + MIRRORS=$(egrep -o '((ftp)|(http))://[^/]*' "${MIRRORLIST}" | sed 's|$| _|g') + _dia_DIALOG --menu "Select an FTP/HTTP mirror" 14 55 7 \ + $MIRRORS \ + "Custom" "_" 2>$ANSWER || return 1 + local _server=$(cat $ANSWER) + if [ "${_server}" = "Custom" ]; then + _dia_DIALOG --inputbox "Enter the full URL to core repo." 8 65 \ + "ftp://ftp.archlinux.org/core/os/i686" 2>$ANSWER || return 1 + SYNC_URL=$(cat $ANSWER) + else + # Form the full URL for our mirror by grepping for the server name in + # our mirrorlist and pulling the full URL out. Substitute 'core' in + # for the repository name, and ensure that if it was listed twice we + # only return one line for the mirror. + SYNC_URL=$(egrep -o "${_server}.*" "${MIRRORLIST}" | sed 's/\$repo/core/g' | head -n1) + fi + echo "Using mirror: $SYNC_URL" >$LOG +} + +# select_source(). taken from setup. TODO: decouple ui +# displays installation source selection menu +# and sets up relevant config files +# +# params: none +# returns: nothing +select_source() +{ + DIALOG --menu "Please select an installation source" 10 35 3 \ + "1" "CD-ROM or OTHER SOURCE" \ + "2" "FTP/HTTP" 2>$ANSWER + + case $(cat $ANSWER) in + "1") + MODE="cd" + ;; + "2") + MODE="ftp" + ;; + esac + + if [ "$MODE" = "cd" ]; then + TITLE="Arch Linux CDROM or OTHER SOURCE Installation" + DIALOG --msgbox "Packages included on this disk have been mounted to /src/core/pkg. If you wish to use your own packages from another source, manually mount them there." 0 0 + if [ ! -d /src/core/pkg ]; then + DIALOG --msgbox "Package directory /src/core/pkg is missing!" 0 0 + return 1 + fi + echo "Using CDROM for package installation" >$LOG + else + TITLE="Arch Linux FTP/HTTP Installation" + DIALOG --msgbox "If you wish to load your ethernet modules manually, please do so now in another terminal." 12 65 + while true; do + DIALOG --menu "FTP Installation" 10 35 3 \ + "0" "Setup Network" \ + "1" "Choose Mirror" \ + "2" "Return to Main Menu" 2>$ANSWER + + case "$(cat $ANSWER)" in + "0") + donetwork ;; + "1") + select_mirror ;; + *) + break ;; + esac + done + fi + S_SRC=1 +} diff --git a/src/lib/lib-software.sh b/src/lib/lib-software.sh index 8ec802a..4537276 100644 --- a/src/lib/lib-software.sh +++ b/src/lib/lib-software.sh @@ -1,7 +1,7 @@ #!/bin/sh -# run_mkinitcpio() taken from setup. adapted a bit. +# run_mkinitcpio() taken from setup. adapted a lot # runs mkinitcpio on the target system, displays output run_mkinitcpio() { @@ -16,3 +16,48 @@ run_mkinitcpio() # alert the user to fatal errors [ $(cat /tmp/.mkinitcpio-retcode) -ne 0 ] && show_warning "MKINITCPIO FAILED - SYSTEM MAY NOT BOOT" "/tmp/mkinitcpio.log" text } + + +# installpkg(). taken from setup. modified bigtime +# performs package installation to the target system +installpkg() { + notify "Package installation will begin now. You can watch the output in the progress window. Please be patient." 0 0 + target_specialfs on + run_background pacman-installpkg "$PACMAN_TARGET -S $PACKAGES" /tmp/pacman.log + follow_progress " Installing... Please Wait " /tmp/pacman.log + + if [ $(cat /tmp/.pacman-retcode) -ne 0 ]; then + echo -e "\nPackage Installation FAILED." >>/tmp/pacman.log + else + echo -e "\nPackage Installation Complete." >>/tmp/pacman.log + fi + rm /tmp/setup-pacman-running + + wait_for pacman-installpkg + + local _result='' + if [ $(cat /tmp/.pacman-retcode) -ne 0 ]; then + _result="Installation Failed (see errors below)" + else + _result="Installation Complete" + fi + rm /tmp/.pacman-retcode + + DIALOG --title "$_result" --exit-label "Continue" \ + --textbox "/tmp/pacman.log" 18 70 || return 1 + + target_specialfs off + + sync +} + +# auto_locale(). taken from setup +# enable glibc locales from rc.conf and build initial locale DB +auto_locale() +{ + for i in $(grep "^LOCALE" ${TARGET_DIR}/etc/rc.conf | sed -e 's/.*="//g' -e's/\..*//g'); do + sed -i -e "s/^#$i/$i/g" ${TARGET_DIR}/etc/locale.gen + done + DIALOG --infobox "Generating glibc base locales..." 4 40 + chroot ${TARGET_DIR} locale-gen >/dev/null +} diff --git a/src/lib/lib-ui.sh b/src/lib/lib-ui.sh index 4672916..9962d84 100644 --- a/src/lib/lib-ui.sh +++ b/src/lib/lib-ui.sh @@ -21,7 +21,7 @@ ask_password () # ask a yes/no question. # $1 question -# returns 0 if response is Y or y. 1 otherwise +# returns 0 if response is yes/y (case insensitive). 1 otherwise # TODO: support for default answer ask_yesno () { @@ -154,6 +154,12 @@ _dia_follow_progress () } +_dia_ask_yesno () +{ + dialog --yesno "$1" 10 55 # returns 0 for yes, 1 for no +} + + _cli_ask_password () { if [ -n "$1" ] @@ -177,7 +183,8 @@ _cli_ask_yesno () { echo -n "$1 (y/n)" read answer - if [ "$answer" = y -o "$answer" = Y ] + answer=`tr '[:upper:]' '[:lower:]' <<< $answer` + if [ "$answer" = y -o "$answer" = yes ] then return 0 else diff --git a/src/lib/setup_TOPROCESS b/src/lib/setup_TOPROCESS index 2e4391a..917dc9c 100644 --- a/src/lib/setup_TOPROCESS +++ b/src/lib/setup_TOPROCESS @@ -268,64 +268,6 @@ mountpoints() { S_MKFS=1 } -# select_mirror() -# Prompt user for preferred mirror and set $SYNC_URL -# -# args: none -# returns: nothing -select_mirror() { - DIALOG --msgbox "Keep in mind ftp.archlinux.org is throttled.\nPlease select another mirror to get full download speed." 18 70 - # FIXME: this regex doesn't honor commenting - MIRRORS=$(egrep -o '((ftp)|(http))://[^/]*' "${MIRRORLIST}" | sed 's|$| _|g') - DIALOG --menu "Select an FTP/HTTP mirror" 14 55 7 \ - $MIRRORS \ - "Custom" "_" 2>$ANSWER || return 1 - local _server=$(cat $ANSWER) - if [ "${_server}" = "Custom" ]; then - DIALOG --inputbox "Enter the full URL to core repo." 8 65 \ - "ftp://ftp.archlinux.org/core/os/i686" 2>$ANSWER || return 1 - SYNC_URL=$(cat $ANSWER) - else - # Form the full URL for our mirror by grepping for the server name in - # our mirrorlist and pulling the full URL out. Substitute 'core' in - # for the repository name, and ensure that if it was listed twice we - # only return one line for the mirror. - SYNC_URL=$(egrep -o "${_server}.*" "${MIRRORLIST}" | sed 's/\$repo/core/g' | head -n1) - fi - echo "Using mirror: $SYNC_URL" >$LOG -} - -# prepare_pacman() -# configures pacman and syncs for the first time on destination system -# -# params: none -# returns: 1 on error -prepare_pacman() { - if [ "$MODE" = "cd" ]; then - local serverurl="${FILE_URL}" - elif [ "$MODE" = "ftp" ]; then - local serverurl="${SYNC_URL}" - fi - - # Setup a pacman.conf in /tmp - cat << EOF > /tmp/pacman.conf -[options] -CacheDir = ${TARGET_DIR}/var/cache/pacman/pkg -CacheDir = /src/core/pkg - -[core] -Server = ${serverurl} -EOF - - # Set up the necessary directories for pacman use - [ ! -d "${TARGET_DIR}/var/cache/pacman/pkg" ] && mkdir -m 755 -p "${TARGET_DIR}/var/cache/pacman/pkg" - [ ! -d "${TARGET_DIR}/var/lib/pacman" ] && mkdir -m 755 -p "${TARGET_DIR}/var/lib/pacman" - - DIALOG --infobox "Refreshing package database..." 6 45 - $PACMAN -Sy >$LOG 2>&1 || return 1 - return 0 -} - # select_packages() # prompts the user to select packages to install # @@ -389,141 +331,6 @@ select_packages() { } -# installpkg() -# performs package installation to the target system -# -installpkg() { - # check step dependencies - if [ $S_SELECT -eq 0 ]; then - DIALOG --msgbox "You must select packages first." 0 0 - return 1 - fi - - DIALOG --msgbox "Package installation will begin now. You can watch the output in the progress window. Please be patient." 0 0 - - # must mount chroot so pre/post installs don't fail out - chroot_mount - - # execute pacman in a subshell so we can follow its progress - # pacman output goes /tmp/pacman.log - # /tmp/setup-pacman-running acts as a lockfile - ( \ - echo "Installing Packages..." >/tmp/pacman.log ; \ - echo >>/tmp/pacman.log ; \ - touch /tmp/setup-pacman-running ; \ - $PACMAN -S "$PACKAGES" 2>&1 >> /tmp/pacman.log ; \ - echo $? > /tmp/.pacman-retcode ; \ - if [ $(cat /tmp/.pacman-retcode) -ne 0 ]; then - echo -e "\nPackage Installation FAILED." >>/tmp/pacman.log - else - echo -e "\nPackage Installation Complete." >>/tmp/pacman.log - fi - rm /tmp/setup-pacman-running - ) & - - sleep 2 - - # display pacman output while it's running - DIALOG --title " Installing... Please Wait " \ - --no-kill --tailboxbg "/tmp/pacman.log" 18 70 2>$ANSWER - while [ -f /tmp/setup-pacman-running ]; do - sleep 1 - done - kill $(cat $ANSWER) - - # pacman finished, display scrollable output - local _result='' - if [ $(cat /tmp/.pacman-retcode) -ne 0 ]; then - _result="Installation Failed (see errors below)" - else - _result="Installation Complete" - fi - rm /tmp/.pacman-retcode - - DIALOG --title "$_result" --exit-label "Continue" \ - --textbox "/tmp/pacman.log" 18 70 || return 1 - - # don't need chroot anymore - chroot_umount - - # ensure the disk is synced - sync - - S_INSTALL=1 - - # automagic time! - # any automatic configuration should go here - DIALOG --infobox "Writing base configuration..." 6 40 - auto_fstab - auto_network - auto_locale -} - -# auto_fstab() -# preprocess fstab file -# comments out old fields and inserts new ones -# according to partitioning/formatting stage -# -auto_fstab() -{ - if [ "$S_MKFS" = "1" -o "$S_MKFSAUTO" = "1" ]; then - if [ -f /tmp/.fstab ]; then - # comment out stray /dev entries - sed -i 's/^\/dev/#\/dev/g' $TARGET_DIR/etc/fstab - # append entries from new configuration - sort /tmp/.fstab >>$TARGET_DIR/etc/fstab - fi - fi -} - -# auto_network() -# configures network on host system according to installer -# settings if user wishes to do so -# -auto_network() -{ - # exit if network wasn't configured in installer - if [ $S_NET -eq 0 ]; then - return 1 - fi - - DIALOG --yesno "Do you want to use the network settings from the installer in rc.conf and resolv.conf?\n\nIf you used Proxy settings, they will be written to /etc/profile.d/proxy.sh" 10 55 || return 1 - - if [ $S_DHCP -ne 1 ]; then - sed -i "s#eth0=\"eth0#$INTERFACE=\"$INTERFACE#g" ${TARGET_DIR}/etc/rc.conf - sed -i "s# 192.168.0.2 # $IPADDR #g" ${TARGET_DIR}/etc/rc.conf - sed -i "s# 255.255.255.0 # $SUBNET #g" ${TARGET_DIR}/etc/rc.conf - sed -i "s# 192.168.0.255\"# $BROADCAST\"#g" ${TARGET_DIR}/etc/rc.conf - sed -i "s#eth0)#$INTERFACE)#g" ${TARGET_DIR}/etc/rc.conf - if [ "$GW" != "" ]; then - sed -i "s#gw 192.168.0.1#gw $GW#g" ${TARGET_DIR}/etc/rc.conf - sed -i "s#!gateway#gateway#g" ${TARGET_DIR}/etc/rc.conf - fi - echo "nameserver $DNS" >> ${TARGET_DIR}/etc/resolv.conf - else - sed -i "s#eth0=\"eth0.*#$INTERFACE=\"dhcp\"#g" ${TARGET_DIR}/etc/rc.conf - fi - if [ "$PROXY_HTTP" != "" ]; then - echo "export http_proxy=$PROXY_HTTP" >> ${TARGET_DIR}/etc/profile.d/proxy.sh; - chmod a+x ${TARGET_DIR}/etc/profile.d/proxy.sh - fi - if [ "$PROXY_FTP" != "" ]; then - echo "export ftp_proxy=$PROXY_FTP" >> ${TARGET_DIR}/etc/profile.d/proxy.sh; - chmod a+x ${TARGET_DIR}/etc/profile.d/proxy.sh - fi -} - -# auto_locale() -# enable glibc locales from rc.conf and build initial locale DB -auto_locale() -{ - for i in $(grep "^LOCALE" ${TARGET_DIR}/etc/rc.conf | sed -e 's/.*="//g' -e's/\..*//g'); do - sed -i -e "s/^#$i/$i/g" ${TARGET_DIR}/etc/locale.gen - done - DIALOG --infobox "Generating glibc base locales..." 4 40 - chroot ${TARGET_DIR} locale-gen >/dev/null -} - # donetwork() # Hand-hold through setting up networking # @@ -722,207 +529,3 @@ EOF S_GRUB=1 } -# select_source() -# displays installation source selection menu -# and sets up relevant config files -# -# params: none -# returns: nothing -select_source() -{ - DIALOG --menu "Please select an installation source" 10 35 3 \ - "1" "CD-ROM or OTHER SOURCE" \ - "2" "FTP/HTTP" 2>$ANSWER - - case $(cat $ANSWER) in - "1") - MODE="cd" - ;; - "2") - MODE="ftp" - ;; - esac - - if [ "$MODE" = "cd" ]; then - TITLE="Arch Linux CDROM or OTHER SOURCE Installation" - DIALOG --msgbox "Packages included on this disk have been mounted to /src/core/pkg. If you wish to use your own packages from another source, manually mount them there." 0 0 - if [ ! -d /src/core/pkg ]; then - DIALOG --msgbox "Package directory /src/core/pkg is missing!" 0 0 - return 1 - fi - echo "Using CDROM for package installation" >$LOG - else - TITLE="Arch Linux FTP/HTTP Installation" - DIALOG --msgbox "If you wish to load your ethernet modules manually, please do so now in another terminal." 12 65 - while true; do - DIALOG --menu "FTP Installation" 10 35 3 \ - "0" "Setup Network" \ - "1" "Choose Mirror" \ - "2" "Return to Main Menu" 2>$ANSWER - - case "$(cat $ANSWER)" in - "0") - donetwork ;; - "1") - select_mirror ;; - *) - break ;; - esac - done - fi - S_SRC=1 -} - -# set_clock() -# prompts user to set hardware clock and timezone -# -# params: none -# returns: 1 on failure -set_clock() -{ - # utc or local? - DIALOG --menu "Is your hardware clock in UTC or local time?" 10 50 2 \ - "UTC" " " \ - "local" " " \ - 2>$ANSWER || return 1 - HARDWARECLOCK=$(cat $ANSWER) - - # timezone? - tzselect > $ANSWER || return 1 - TIMEZONE=$(cat $ANSWER) - - # set system clock from hwclock - stolen from rc.sysinit - local HWCLOCK_PARAMS="" - if [ "$HARDWARECLOCK" = "UTC" ]; then - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc" - else - HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime" - fi - if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then - /bin/rm -f /etc/localtime - /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime - fi - /sbin/hwclock --hctosys $HWCLOCK_PARAMS --noadjfile - - # display and ask to set date/time - dialog --calendar "Set the date.\nUse <TAB> to navigate and arrow keys to change values." 0 0 0 0 0 2> $ANSWER || return 1 - local _date="$(cat $ANSWER)" - dialog --timebox "Set the time.\nUse <TAB> to navigate and up/down to change values." 0 0 2> $ANSWER || return 1 - local _time="$(cat $ANSWER)" - echo "date: $_date time: $_time" >$LOG - - # save the time - # DD/MM/YYYY hh:mm:ss -> YYYY-MM-DD hh:mm:ss - local _datetime="$(echo "$_date" "$_time" | sed 's#\(..\)/\(..\)/\(....\) \(..\):\(..\):\(..\)#\3-\2-\1 \4:\5:\6#g')" - echo "setting date to: $_datetime" >$LOG - date -s "$_datetime" 2>&1 >$LOG - /sbin/hwclock --systohc $HWCLOCK_PARAMS --noadjfile - - S_CLOCK=1 -} - -prepare_harddrive() -{ - S_MKFSAUTO=0 - S_MKFS=0 - DONE=0 - NEXTITEM="" - while [ "$DONE" = "0" ]; do - if [ -n "$NEXTITEM" ]; then - DEFAULT="--default-item $NEXTITEM" - else - DEFAULT="" - fi - DIALOG $DEFAULT --menu "Prepare Hard Drive" 12 60 5 \ - "1" "Auto-Prepare (erases the ENTIRE hard drive)" \ - "2" "Partition Hard Drives" \ - "3" "Set Filesystem Mountpoints" \ - "4" "Return to Main Menu" 2>$ANSWER - NEXTITEM="$(cat $ANSWER)" - case $(cat $ANSWER) in - "1") - autoprepare ;; - "2") - partition ;; - "3") - PARTFINISH="" - mountpoints ;; - *) - DONE=1 ;; - esac - done - NEXTITEM="1" -} - -configure_system() -{ - ## PREPROCESSING ## - # only done on first invocation of configure_system - if [ $S_CONFIG -eq 0 ]; then - - # /etc/pacman.d/mirrorlist - # add installer-selected mirror to the top of the mirrorlist - if [ "$MODE" = "ftp" -a "${SYNC_URL}" != "" ]; then - awk "BEGIN { printf(\"# Mirror used during installation\nServer = "${SYNC_URL}"\n\n\") } 1 " "${TARGET_DIR}/etc/pacman.d/mirrorlist" - fi - - # /etc/rc.conf - # insert timezone and utc info - sed -i -e "s/^TIMEZONE=.*/TIMEZONE=\"$TIMEZONE\"/g" \ - -e "s/^HARDWARECLOCK=.*/HARDWARECLOCK=\"$HARDWARECLOCK\"/g" \ - ${TARGET_DIR}/etc/rc.conf - fi - - ## END PREPROCESS ## - - [ "$EDITOR" ] || geteditor - FILE="" - - # main menu loop - while true; do - if [ -n "$FILE" ]; then - DEFAULT="--default-item $FILE" - else - DEFAULT="" - fi - - DIALOG $DEFAULT --menu "Configuration" 17 70 10 \ - "/etc/rc.conf" "System Config" \ - "/etc/fstab" "Filesystem Mountpoints" \ - "/etc/mkinitcpio.conf" "Initramfs Config" \ - "/etc/modprobe.conf" "Kernel Modules" \ - "/etc/resolv.conf" "DNS Servers" \ - "/etc/hosts" "Network Hosts" \ - "/etc/hosts.deny" "Denied Network Services" \ - "/etc/hosts.allow" "Allowed Network Services" \ - "/etc/locale.gen" "Glibc Locales" \ - "/etc/pacman.d/mirrorlist" "Pacman Mirror List" \ - "Root-Password" "Set the root password" \ - "Return" "Return to Main Menu" 2>$ANSWER || FILE="Return" - FILE="$(cat $ANSWER)" - - if [ "$FILE" = "Return" -o -z "$FILE" ]; then # exit - break - elif [ "$FILE" = "Root-Password" ]; then # non-file - while true; do - chroot ${TARGET_DIR} passwd root && break - done - else #regular file - $EDITOR ${TARGET_DIR}${FILE} - fi - done - - ## POSTPROCESSING ## - - # /etc/initcpio.conf - # - run_mkinitcpio - - # /etc/locale.gen - # - chroot ${TARGET_DIR} locale-gen - - ## END POSTPROCESSING ## - - S_CONFIG=1 -} diff --git a/src/profiles/profile-interactive-DRAFT.sh b/src/profiles/profile-interactive-DRAFT.sh index cca2930..f94853f 100644 --- a/src/profiles/profile-interactive-DRAFT.sh +++ b/src/profiles/profile-interactive-DRAFT.sh @@ -108,6 +108,170 @@ partition() { S_PART=1 } + +configure_system() +{ + ## PREPROCESSING ## + # only done on first invocation of configure_system + if [ $S_CONFIG -eq 0 ]; then + + # /etc/pacman.d/mirrorlist + # add installer-selected mirror to the top of the mirrorlist + if [ "$MODE" = "ftp" -a "${SYNC_URL}" != "" ]; then + awk "BEGIN { printf(\"# Mirror used during installation\nServer = "${SYNC_URL}"\n\n\") } 1 " "${TARGET_DIR}/etc/pacman.d/mirrorlist" + fi + + # /etc/rc.conf + # insert timezone and utc info + sed -i -e "s/^TIMEZONE=.*/TIMEZONE=\"$TIMEZONE\"/g" \ + -e "s/^HARDWARECLOCK=.*/HARDWARECLOCK=\"$HARDWARECLOCK\"/g" \ + ${TARGET_DIR}/etc/rc.conf + fi + + ## END PREPROCESS ## + + [ "$EDITOR" ] || geteditor + FILE="" + + # main menu loop + while true; do + if [ -n "$FILE" ]; then + DEFAULT="--default-item $FILE" + else + DEFAULT="" + fi + + DIALOG $DEFAULT --menu "Configuration" 17 70 10 \ + "/etc/rc.conf" "System Config" \ + "/etc/fstab" "Filesystem Mountpoints" \ + "/etc/mkinitcpio.conf" "Initramfs Config" \ + "/etc/modprobe.conf" "Kernel Modules" \ + "/etc/resolv.conf" "DNS Servers" \ + "/etc/hosts" "Network Hosts" \ + "/etc/hosts.deny" "Denied Network Services" \ + "/etc/hosts.allow" "Allowed Network Services" \ + "/etc/locale.gen" "Glibc Locales" \ + "/etc/pacman.d/mirrorlist" "Pacman Mirror List" \ + "Root-Password" "Set the root password" \ + "Return" "Return to Main Menu" 2>$ANSWER || FILE="Return" + FILE="$(cat $ANSWER)" + if [ "$FILE" = "Return" -o -z "$FILE" ]; then # exit + break + elif [ "$FILE" = "Root-Password" ]; then # non-file + while true; do + chroot ${TARGET_DIR} passwd root && break + done + else #regular file + $EDITOR ${TARGET_DIR}${FILE} + fi + done + + ## POSTPROCESSING ## + + # /etc/initcpio.conf + # + run_mkinitcpio + + # /etc/locale.gen + # + chroot ${TARGET_DIR} locale-gen + + ## END POSTPROCESSING ## + + S_CONFIG=1 +} + + +prepare_harddrive() +{ + S_MKFSAUTO=0 + S_MKFS=0 + DONE=0 + NEXTITEM="" + while [ "$DONE" = "0" ]; do + if [ -n "$NEXTITEM" ]; then + DEFAULT="--default-item $NEXTITEM" + else + DEFAULT="" + fi + DIALOG $DEFAULT --menu "Prepare Hard Drive" 12 60 5 \ + "1" "Auto-Prepare (erases the ENTIRE hard drive)" \ + "2" "Partition Hard Drives" \ + "3" "Set Filesystem Mountpoints" \ + "4" "Return to Main Menu" 2>$ANSWER + NEXTITEM="$(cat $ANSWER)" + case $(cat $ANSWER) in + "1") + autoprepare ;; + "2") + partition ;; + "3") + PARTFINISH="" + mountpoints ;; + *) + DONE=1 ;; + esac + done + NEXTITEM="1" +} + + +# set_clock() +# prompts user to set hardware clock and timezone +# +# params: none +# returns: 1 on failure +set_clock() +{ + # utc or local? + DIALOG --menu "Is your hardware clock in UTC or local time?" 10 50 2 \ + "UTC" " " \ + "local" " " \ + 2>$ANSWER || return 1 + HARDWARECLOCK=$(cat $ANSWER) + + # timezone? + tzselect > $ANSWER || return 1 + TIMEZONE=$(cat $ANSWER) + + # set system clock from hwclock - stolen from rc.sysinit + local HWCLOCK_PARAMS="" + if [ "$HARDWARECLOCK" = "UTC" ]; then + HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc" + else + HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime" + fi + if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then + /bin/rm -f /etc/localtime + /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime + fi + /sbin/hwclock --hctosys $HWCLOCK_PARAMS --noadjfile + + # display and ask to set date/time + dialog --calendar "Set the date.\nUse <TAB> to navigate and arrow keys to change values." 0 0 0 0 0 2> $ANSWER || return 1 + local _date="$(cat $ANSWER)" + dialog --timebox "Set the time.\nUse <TAB> to navigate and up/down to change values." 0 0 2> $ANSWER || return 1 + local _time="$(cat $ANSWER)" + echo "date: $_date time: $_time" >$LOG + + # save the time + # DD/MM/YYYY hh:mm:ss -> YYYY-MM-DD hh:mm:ss + local _datetime="$(echo "$_date" "$_time" | sed 's#\(..\)/\(..\)/\(....\) \(..\):\(..\):\(..\)#\3-\2-\1 \4:\5:\6#g')" + echo "setting date to: $_datetime" >$LOG + date -s "$_datetime" 2>&1 >$LOG + /sbin/hwclock --systohc $HWCLOCK_PARAMS --noadjfile + + S_CLOCK=1 +} + +[ $S_SELECT -eq 0 ] && install_pkg && S_INSTALL=1 # user must first select, then install +# automagic time! +# any automatic configuration should go here +notify "Writing base configuration..." +auto_fstab +auto_network +auto_locale + ##################### ## begin execution ## |