summaryrefslogtreecommitdiff
path: root/src/core/procedures/interactive-DRAFT
diff options
context:
space:
mode:
Diffstat (limited to 'src/core/procedures/interactive-DRAFT')
-rw-r--r--src/core/procedures/interactive-DRAFT842
1 files changed, 842 insertions, 0 deletions
diff --git a/src/core/procedures/interactive-DRAFT b/src/core/procedures/interactive-DRAFT
new file mode 100644
index 0000000..145b32d
--- /dev/null
+++ b/src/core/procedures/interactive-DRAFT
@@ -0,0 +1,842 @@
+#!/bin/sh
+
+TARGET_DIR="/mnt"
+EDITOR=
+
+
+# clock
+HARDWARECLOCK=
+TIMEZONE=
+
+# partitions
+PART_ROOT=
+
+# default filesystem specs (the + is bootable flag)
+# <mountpoint>:<partsize>:<fstype>[:+]
+DEFAULTFS="/boot:32:ext2:+ swap:256:swap /:7500:ext3 /home:*:ext3"
+
+
+
+start_process ()
+{
+ #####################
+ ## begin execution ##
+
+ # install stages
+ S_SRC=0 # choose install medium
+ S_NET=0 # network configuration
+ S_CLOCK=0 # clock and timezone
+ S_PART=0 # partitioning
+ S_MKFS=0 # formatting
+ S_MKFSAUTO=0 # auto fs part/formatting TODO: kill this
+ S_SELECT=0 # package selection
+ S_INSTALL=0 # package installation
+ S_CONFIG=0 # configuration editing
+ S_GRUB=0 # TODO: kill this - if using grub
+ S_BOOT="" # bootloader installed (set to loader name instead of 1)
+
+ var_UI_TYPE=dia
+
+ notify "Welcome to the Arch Linux Installation program. The install \
+ process is fairly straightforward, and you should run through the options in \
+ the order they are presented. If you are unfamiliar with partitioning/making \
+ filesystems, you may want to consult some documentation before continuing. \
+ You can view all output from commands by viewing your VC7 console (ALT-F7). \
+ ALT-F1 will bring you back here."
+
+ while true
+ do
+ mainmenu
+ done
+
+}
+
+
+phase_preparation ()
+{
+ #TODO: when does grub device map happen in official installer?
+ execute worker runtime_packages
+ notify "Generating GRUB device map...\nThis could take a while.\n\n Please be patient."
+ get_grub_map
+}
+
+mainmenu()
+{
+ if [ -n "$NEXTITEM" ]; then
+ DEFAULT="--default-item $NEXTITEM"
+ else
+ DEFAULT=""
+ fi
+ DIALOG $DEFAULT --title " MAIN MENU " \
+ --menu "Use the UP and DOWN arrows to navigate menus. Use TAB to switch between buttons and ENTER to select." 16 55 8 \
+ "0" "Select Source" \
+ "1" "Set Clock" \
+ "2" "Prepare Hard Drive" \
+ "3" "Select Packages" \
+ "4" "Install Packages" \
+ "5" "Configure System" \
+ "6" "Install Bootloader" \
+ "7" "Exit Install" 2>$ANSWER
+ NEXTITEM="$(cat $ANSWER)"
+ case $(cat $ANSWER) in
+ "0")
+ select_source ;;
+ "1")
+ set_clock ;;
+ "2")
+ prepare_harddrive ;;
+ "3")
+ select_packages ;;
+ "4")
+ installpkg ;;
+ "5")
+ configure_system ;;
+ "6")
+ install_bootloader ;;
+ "7")
+ echo ""
+ echo "If the install finished successfully, you can now type 'reboot'"
+ echo "to restart the system."
+ echo ""
+ exit 0 ;;
+ *)
+ DIALOG --yesno "Abort Installation?" 6 40 && exit 0
+ ;;
+ esac
+}
+
+partition() {
+ if [ "$S_MKFSAUTO" = "1" ]; then
+ notify "You have already prepared your filesystems with Auto-prepare" 0 0
+ return 0
+ fi
+
+ _umountall
+
+ # Select disk to partition
+ DISCS=$(finddisks _)
+ DISCS="$DISCS OTHER - DONE +"
+ DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
+ DISC=""
+ while true; do
+ # Prompt the user with a list of known disks
+ DIALOG --menu "Select the disk you want to partition (select DONE when finished)" 14 55 7 $DISCS 2>$ANSWER || return 1
+ DISC=$(cat $ANSWER)
+ if [ "$DISC" = "OTHER" ]; then
+ DIALOG --inputbox "Enter the full path to the device you wish to partition" 8 65 "/dev/sda" 2>$ANSWER || return 1
+ DISC=$(cat $ANSWER)
+ fi
+ # Leave our loop if the user is done partitioning
+ [ "$DISC" = "DONE" ] && break
+ # Partition disc
+ DIALOG --msgbox "Now you'll be put into the cfdisk program where you can partition your hard drive. You should make a swap partition and as many data partitions as you will need. NOTE: cfdisk may ttell you to reboot after creating partitions. If you need to reboot, just re-enter this install program, skip this step and go on to step 2." 18 70
+ cfdisk $DISC
+ done
+ S_PART=1
+}
+
+
+configure_system()
+{
+ ## PREPROCESSING ##
+ # only done on first invocation of configure_system
+ if [ $S_CONFIG -eq 0 ]; then
+
+ # /etc/pacman.d/mirrorlist
+ # add installer-selected mirror to the top of the mirrorlist
+ if [ "$MODE" = "ftp" -a "${SYNC_URL}" != "" ]; then
+ awk "BEGIN { printf(\"# Mirror used during installation\nServer = "${SYNC_URL}"\n\n\") } 1 " "${TARGET_DIR}/etc/pacman.d/mirrorlist"
+ fi
+
+ # /etc/rc.conf
+ # insert timezone and utc info
+ sed -i -e "s/^TIMEZONE=.*/TIMEZONE=\"$TIMEZONE\"/g" \
+ -e "s/^HARDWARECLOCK=.*/HARDWARECLOCK=\"$HARDWARECLOCK\"/g" \
+ ${TARGET_DIR}/etc/rc.conf
+ fi
+
+ ## END PREPROCESS ##
+
+ [ "$EDITOR" ] || geteditor
+ FILE=""
+
+ # main menu loop
+ while true; do
+ if [ -n "$FILE" ]; then
+ DEFAULT="--default-item $FILE"
+ else
+ DEFAULT=""
+ fi
+
+ DIALOG $DEFAULT --menu "Configuration" 17 70 10 \
+ "/etc/rc.conf" "System Config" \
+ "/etc/fstab" "Filesystem Mountpoints" \
+ "/etc/mkinitcpio.conf" "Initramfs Config" \
+ "/etc/modprobe.conf" "Kernel Modules" \
+ "/etc/resolv.conf" "DNS Servers" \
+ "/etc/hosts" "Network Hosts" \
+ "/etc/hosts.deny" "Denied Network Services" \
+ "/etc/hosts.allow" "Allowed Network Services" \
+ "/etc/locale.gen" "Glibc Locales" \
+ "/etc/pacman.d/mirrorlist" "Pacman Mirror List" \
+ "Root-Password" "Set the root password" \
+ "Return" "Return to Main Menu" 2>$ANSWER || FILE="Return"
+ FILE="$(cat $ANSWER)"
+ if [ "$FILE" = "Return" -o -z "$FILE" ]; then # exit
+ break
+ elif [ "$FILE" = "Root-Password" ]; then # non-file
+ while true; do
+ chroot ${TARGET_DIR} passwd root && break
+ done
+ else #regular file
+ $EDITOR ${TARGET_DIR}${FILE}
+ fi
+ done
+
+ ## POSTPROCESSING ##
+
+ # /etc/initcpio.conf
+ #
+ run_mkinitcpio
+
+ # /etc/locale.gen
+ #
+ chroot ${TARGET_DIR} locale-gen
+
+ ## END POSTPROCESSING ##
+
+ S_CONFIG=1
+}
+
+
+prepare_harddrive()
+{
+ S_MKFSAUTO=0
+ S_MKFS=0
+ DONE=0
+ NEXTITEM=""
+ while [ "$DONE" = "0" ]; do
+ if [ -n "$NEXTITEM" ]; then
+ DEFAULT="--default-item $NEXTITEM"
+ else
+ DEFAULT=""
+ fi
+ DIALOG $DEFAULT --menu "Prepare Hard Drive" 12 60 5 \
+ "1" "Auto-Prepare (erases the ENTIRE hard drive)" \
+ "2" "Partition Hard Drives" \
+ "3" "Set Filesystem Mountpoints" \
+ "4" "Return to Main Menu" 2>$ANSWER
+ NEXTITEM="$(cat $ANSWER)"
+ case $(cat $ANSWER) in
+ "1")
+ autoprepare ;;
+ "2")
+ partition ;;
+ "3")
+ PARTFINISH=""
+ mountpoints ;;
+ *)
+ DONE=1 ;;
+ esac
+ done
+ NEXTITEM="1"
+}
+
+
+# set_clock()
+# prompts user to set hardware clock and timezone
+#
+# params: none
+# returns: 1 on failure
+set_clock()
+{
+ # utc or local?
+ DIALOG --menu "Is your hardware clock in UTC or local time?" 10 50 2 \
+ "UTC" " " \
+ "local" " " \
+ 2>$ANSWER || return 1
+ HARDWARECLOCK=$(cat $ANSWER)
+
+ # timezone?
+ tzselect > $ANSWER || return 1
+ TIMEZONE=$(cat $ANSWER)
+
+ # set system clock from hwclock - stolen from rc.sysinit
+ local HWCLOCK_PARAMS=""
+ if [ "$HARDWARECLOCK" = "UTC" ]; then
+ HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
+ else
+ HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
+ fi
+ if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
+ /bin/rm -f /etc/localtime
+ /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
+ fi
+ /sbin/hwclock --hctosys $HWCLOCK_PARAMS --noadjfile
+
+ # display and ask to set date/time
+ dialog --calendar "Set the date.\nUse <TAB> to navigate and arrow keys to change values." 0 0 0 0 0 2> $ANSWER || return 1
+ local _date="$(cat $ANSWER)"
+ dialog --timebox "Set the time.\nUse <TAB> to navigate and up/down to change values." 0 0 2> $ANSWER || return 1
+ local _time="$(cat $ANSWER)"
+ echo "date: $_date time: $_time" >$LOG
+
+ # save the time
+ # DD/MM/YYYY hh:mm:ss -> YYYY-MM-DD hh:mm:ss
+ local _datetime="$(echo "$_date" "$_time" | sed 's#\(..\)/\(..\)/\(....\) \(..\):\(..\):\(..\)#\3-\2-\1 \4:\5:\6#g')"
+ echo "setting date to: $_datetime" >$LOG
+ date -s "$_datetime" 2>&1 >$LOG
+ /sbin/hwclock --systohc $HWCLOCK_PARAMS --noadjfile
+
+ S_CLOCK=1
+}
+
+[ $S_SELECT -eq 0 ] && install_pkg && S_INSTALL=1 # user must first select, then install
+# automagic time!
+# any automatic configuration should go here
+notify "Writing base configuration..."
+auto_fstab
+auto_network
+auto_locale
+
+autoprepare()
+{
+ DISCS=$(finddisks)
+ if [ $(echo $DISCS | wc -w) -gt 1 ]; then
+ DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
+ DIALOG --menu "Select the hard drive to use" 14 55 7 $(finddisks _) 2>$ANSWER || return 1
+ DISC=$(cat $ANSWER)
+ else
+ DISC=$DISCS
+ fi
+ SET_DEFAULTFS=""
+ BOOT_PART_SET=""
+ SWAP_PART_SET=""
+ ROOT_PART_SET=""
+ CHOSEN_FS=""
+ # get just the disk size in 1000*1000 MB
+ DISC_SIZE=$(hdparm -I /dev/sda | grep -F '1000*1000' | sed "s/^.*:[ \t]*\([0-9]*\) MBytes.*$/\1/")
+ while [ "$SET_DEFAULTFS" = "" ]; do
+ FSOPTS="ext2 ext2 ext3 ext3"
+ [ "$(which mkreiserfs 2>/dev/null)" ] && FSOPTS="$FSOPTS reiserfs Reiser3"
+ [ "$(which mkfs.xfs 2>/dev/null)" ] && FSOPTS="$FSOPTS xfs XFS"
+ [ "$(which mkfs.jfs 2>/dev/null)" ] && FSOPTS="$FSOPTS jfs JFS"
+ while [ "$BOOT_PART_SET" = "" ]; do
+ DIALOG --inputbox "Enter the size (MB) of your /boot partition. Minimum value is 16.\n\nDisk space left: $DISC_SIZE MB" 8 65 "32" 2>$ANSWER || return 1
+ BOOT_PART_SIZE="$(cat $ANSWER)"
+ if [ "$BOOT_PART_SIZE" = "" ]; then
+ DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
+ else
+ if [ "$BOOT_PART_SIZE" -ge "$DISC_SIZE" -o "$BOOT_PART_SIZE" -lt "16" -o "$SBOOT_PART_SIZE" = "$DISC_SIZE" ]; then
+ DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
+ else
+ BOOT_PART_SET=1
+ fi
+ fi
+ done
+ DISC_SIZE=$(($DISC_SIZE-$BOOT_PART_SIZE))
+ while [ "$SWAP_PART_SET" = "" ]; do
+ DIALOG --inputbox "Enter the size (MB) of your swap partition. Minimum value is > 0.\n\nDisk space left: $DISC_SIZE MB" 8 65 "256" 2>$ANSWER || return 1
+ SWAP_PART_SIZE=$(cat $ANSWER)
+ if [ "$SWAP_PART_SIZE" = "" -o "$SWAP_PART_SIZE" -le "0" ]; then
+ DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
+ else
+ if [ "$SWAP_PART_SIZE" -ge "$DISC_SIZE" ]; then
+ DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
+ else
+ SWAP_PART_SET=1
+ fi
+ fi
+ done
+ DISC_SIZE=$(($DISC_SIZE-$SWAP_PART_SIZE))
+ while [ "$ROOT_PART_SET" = "" ]; do
+ DIALOG --inputbox "Enter the size (MB) of your / partition. The /home partition will use the remaining space.\n\nDisk space left: $DISC_SIZE MB" 8 65 "7500" 2>$ANSWER || return 1
+ ROOT_PART_SIZE=$(cat $ANSWER)
+ if [ "$ROOT_PART_SIZE" = "" -o "$ROOT_PART_SIZE" -le "0" ]; then
+ DIALOG --msgbox "ERROR: You have entered an invalid size, please enter again." 0 0
+ else
+ if [ "$ROOT_PART_SIZE" -ge "$DISC_SIZE" ]; then
+ DIALOG --msgbox "ERROR: You have entered a too large size, please enter again." 0 0
+ else
+ DIALOG --yesno "$(($DISC_SIZE-$ROOT_PART_SIZE)) MB will be used for your /home partition. Is this OK?" 0 0 && ROOT_PART_SET=1
+ fi
+ fi
+ done
+ while [ "$CHOSEN_FS" = "" ]; do
+ DIALOG --menu "Select a filesystem for / and /home:" 13 45 6 $FSOPTS 2>$ANSWER || return 1
+ FSTYPE=$(cat $ANSWER)
+ DIALOG --yesno "$FSTYPE will be used for / and /home. Is this OK?" 0 0 && CHOSEN_FS=1
+ done
+ SET_DEFAULTFS=1
+ done
+
+ DIALOG --defaultno --yesno "$DISC will be COMPLETELY ERASED! Are you absolutely sure?" 0 0 \
+ || return 1
+
+ DEVICE=$DISC
+ FSSPECS=$(echo $DEFAULTFS | sed -e "s|/:7500:ext3|/:$ROOT_PART_SIZE:$FSTYPE|g" -e "s|/home:\*:ext3|/home:\*:$FSTYPE|g" -e "s|swap:256|swap:$SWAP_PART_SIZE|g" -e "s|/boot:32|/boot:$BOOT_PART_SIZE|g")
+ sfdisk_input=""
+
+ # we assume a /dev/hdX format (or /dev/sdX)
+ PART_ROOT="${DEVICE}3"
+
+ if [ "$S_MKFS" = "1" ]; then
+ DIALOG --msgbox "You have already prepared your filesystems manually" 0 0
+ return 0
+ fi
+
+ # validate DEVICE
+ if [ ! -b "$DEVICE" ]; then
+ DIALOG --msgbox "Device '$DEVICE' is not valid" 0 0
+ return 1
+ fi
+
+ # validate DEST
+ if [ ! -d "$TARGET_DIR" ]; then
+ DIALOG --msgbox "Destination directory '$TARGET_DIR' is not valid" 0 0
+ return 1
+ fi
+
+ # / required
+ if [ $(echo $FSSPECS | grep '/:' | wc -l) -ne 1 ]; then
+ DIALOG --msgbox "Need exactly one root partition" 0 0
+ return 1
+ fi
+
+ rm -f /tmp/.fstab
+
+ _umountall
+
+ # setup input var for sfdisk
+ for fsspec in $FSSPECS; do
+ fssize=$(echo $fsspec | tr -d ' ' | cut -f2 -d:)
+ if [ "$fssize" = "*" ]; then
+ fssize_spec=';'
+ else
+ fssize_spec=",$fssize"
+ fi
+ fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
+ if [ "$fstype" = "swap" ]; then
+ fstype_spec=",S"
+ else
+ fstype_spec=","
+ fi
+ bootflag=$(echo $fsspec | tr -d ' ' | cut -f4 -d:)
+ if [ "$bootflag" = "+" ]; then
+ bootflag_spec=",*"
+ else
+ bootflag_spec=""
+ fi
+ sfdisk_input="${sfdisk_input}${fssize_spec}${fstype_spec}${bootflag_spec}\n"
+ done
+ sfdisk_input=$(printf "$sfdisk_input")
+
+ # invoke sfdisk
+ printk off
+ DIALOG --infobox "Partitioning $DEVICE" 0 0
+ sfdisk $DEVICE -uM >$LOG 2>&1 <<EOF
+$sfdisk_input
+EOF
+ if [ $? -gt 0 ]; then
+ DIALOG --msgbox "Error partitioning $DEVICE (see $LOG for details)" 0 0
+ printk on
+ return 1
+ fi
+ printk on
+
+ # need to mount root first, then do it again for the others
+ part=1
+ for fsspec in $FSSPECS; do
+ mountpoint=$(echo $fsspec | tr -d ' ' | cut -f1 -d:)
+ fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
+ if echo $mountpoint | tr -d ' ' | grep '^/$' 2>&1 > /dev/null; then
+ _mkfs yes ${DEVICE}${part} "$fstype" "$TARGET_DIR" "$mountpoint" || return 1
+ fi
+ part=$(($part + 1))
+ done
+
+ # make other filesystems
+ part=1
+ for fsspec in $FSSPECS; do
+ mountpoint=$(echo $fsspec | tr -d ' ' | cut -f1 -d:)
+ fstype=$(echo $fsspec | tr -d ' ' | cut -f3 -d:)
+ if [ $(echo $mountpoint | tr -d ' ' | grep '^/$' | wc -l) -eq 0 ]; then
+ _mkfs yes ${DEVICE}${part} "$fstype" "$TARGET_DIR" "$mountpoint" || return 1
+ fi
+ part=$(($part + 1))
+ done
+
+ DIALOG --msgbox "Auto-prepare was successful" 0 0
+ S_MKFSAUTO=1
+}
+
+mountpoints() {
+ if [ "$S_MKFSAUTO" = "1" ]; then
+ DIALOG --msgbox "You have already prepared your filesystems with Auto-prepare" 0 0
+ return 0
+ fi
+ while [ "$PARTFINISH" != "DONE" ]; do
+ : >/tmp/.fstab
+ : >/tmp/.parts
+
+ # Determine which filesystems are available
+ FSOPTS="ext2 ext2 ext3 ext3"
+ [ "$(which mkreiserfs 2>/dev/null)" ] && FSOPTS="$FSOPTS reiserfs Reiser3"
+ [ "$(which mkfs.xfs 2>/dev/null)" ] && FSOPTS="$FSOPTS xfs XFS"
+ [ "$(which mkfs.jfs 2>/dev/null)" ] && FSOPTS="$FSOPTS jfs JFS"
+ [ "$(which mkfs.vfat 2>/dev/null)" ] && FSOPTS="$FSOPTS vfat VFAT"
+
+ # Select mountpoints
+ DIALOG --msgbox "Available Disks:\n\n$(_getavaildisks)\n" 0 0
+ PARTS=$(findpartitions _)
+ DIALOG --menu "Select the partition to use as swap" 21 50 13 NONE - $PARTS 2>$ANSWER || return 1
+ PART=$(cat $ANSWER)
+ PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
+ if [ "$PART" != "NONE" ]; then
+ DOMKFS="no"
+ DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
+ echo "$PART:swap:swap:$DOMKFS" >>/tmp/.parts
+ fi
+
+ DIALOG --menu "Select the partition to mount as /" 21 50 13 $PARTS 2>$ANSWER || return 1
+ PART=$(cat $ANSWER)
+ PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
+ PART_ROOT=$PART
+ # Select root filesystem type
+ DIALOG --menu "Select a filesystem for $PART" 13 45 6 $FSOPTS 2>$ANSWER || return 1
+ FSTYPE=$(cat $ANSWER)
+ DOMKFS="no"
+ DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
+ echo "$PART:$FSTYPE:/:$DOMKFS" >>/tmp/.parts
+
+ #
+ # Additional partitions
+ #
+ DIALOG --menu "Select any additional partitions to mount under your new root (select DONE when finished)" 21 50 13 $PARTS DONE _ 2>$ANSWER || return 1
+ PART=$(cat $ANSWER)
+ while [ "$PART" != "DONE" ]; do
+ PARTS="$(echo $PARTS | sed -e "s#${PART}\ _##g")"
+ # Select a filesystem type
+ DIALOG --menu "Select a filesystem for $PART" 13 45 6 $FSOPTS 2>$ANSWER || return 1
+ FSTYPE=$(cat $ANSWER)
+ MP=""
+ while [ "${MP}" = "" ]; do
+ DIALOG --inputbox "Enter the mountpoint for $PART" 8 65 "/boot" 2>$ANSWER || return 1
+ MP=$(cat $ANSWER)
+ if grep ":$MP:" /tmp/.parts; then
+ DIALOG --msgbox "ERROR: You have defined 2 identical mountpoints! Please select another mountpoint." 8 65
+ MP=""
+ fi
+ done
+ DOMKFS="no"
+ DIALOG --yesno "Would you like to create a filesystem on $PART?\n\n(This will overwrite existing data!)" 0 0 && DOMKFS="yes"
+ echo "$PART:$FSTYPE:$MP:$DOMKFS" >>/tmp/.parts
+ DIALOG --menu "Select any additional partitions to mount under your new root" 21 50 13 $PARTS DONE _ 2>$ANSWER || return 1
+ PART=$(cat $ANSWER)
+ done
+ DIALOG --yesno "Would you like to create and mount the filesytems like this?\n\nSyntax\n------\nDEVICE:TYPE:MOUNTPOINT:FORMAT\n\n$(for i in $(cat /tmp/.parts); do echo "$i\n";done)" 18 0 && PARTFINISH="DONE"
+ done
+
+ _umountall
+
+ for line in $(cat /tmp/.parts); do
+ PART=$(echo $line | cut -d: -f 1)
+ FSTYPE=$(echo $line | cut -d: -f 2)
+ MP=$(echo $line | cut -d: -f 3)
+ DOMKFS=$(echo $line | cut -d: -f 4)
+ umount ${TARGET_DIR}${MP}
+ if [ "$DOMKFS" = "yes" ]; then
+ if [ "$FSTYPE" = "swap" ]; then
+ DIALOG --infobox "Creating and activating swapspace on $PART" 0 0
+ else
+ DIALOG --infobox "Creating $FSTYPE on $PART, mounting to ${TARGET_DIR}${MP}" 0 0
+ fi
+ _mkfs yes $PART $FSTYPE $TARGET_DIR $MP || return 1
+ else
+ if [ "$FSTYPE" = "swap" ]; then
+ DIALOG --infobox "Activating swapspace on $PART" 0 0
+ else
+ DIALOG --infobox "Mounting $PART to ${TARGET_DIR}${MP}" 0 0
+ fi
+ _mkfs no $PART $FSTYPE $TARGET_DIR $MP || return 1
+ fi
+ sleep 1
+ done
+
+ DIALOG --msgbox "Partitions were successfully mounted." 0 0
+ S_MKFS=1
+}
+
+# select_packages()
+# prompts the user to select packages to install
+#
+# params: none
+# returns: 1 on error
+select_packages() {
+ # step dependencies
+ if [ $S_SRC -eq 0 ]; then
+ DIALOG --msgbox "You must select an installation source!" 0 0
+ return 1
+ fi
+
+ # if selection has been done before, warn about loss of input
+ # and let the user exit gracefully
+ if [ $S_SELECT -ne 0 ]; then
+ DIALOG --yesno "WARNING: Running this stage again will result in the loss of previous package selections.\n\nDo you wish to continue?" 10 50 || return 1
+ fi
+
+ DIALOG --msgbox "Package selection is split into two stages. First you will select package categories that contain packages you may be interested in. Then you will be presented with a full list of packages for each category, allowing you to fine-tune.\n\n" 15 70
+
+ # set up our install location if necessary and sync up
+ # so we can get package lists
+ prepare_pacman
+ if [ $? -ne 0 ]; then
+ DIALOG --msgbox "Pacman preparation failed! Check $LOG for errors." 6 60
+ return 1
+ fi
+
+ # show group listing for group selection
+ local _catlist="base ^ ON"
+ for i in $($PACMAN -Sg | sed "s/^base$/ /g"); do
+ _catlist="${_catlist} ${i} - OFF"
+ done
+
+ DIALOG --checklist "Select Package Categories\nDO NOT deselect BASE unless you know what you're doing!" 19 55 12 $_catlist 2>$ANSWER || return 1
+ _catlist="$(cat $ANSWER)"
+
+ # assemble a list of packages with groups, marking pre-selected ones
+ # <package> <group> <selected>
+ local _pkgtmp="$($PACMAN -Sl core | awk '{print $2}')"
+ local _pkglist=''
+
+ $PACMAN -Si $_pkgtmp | \
+ awk '/^Name/{ printf("%s ",$3) } /^Group/{ print $3 }' > $ANSWER
+ while read pkgname pkgcat; do
+ # check if this package is in a selected group
+ # slightly ugly but sorting later requires newlines in the variable
+ if [ "${_catlist/"\"$pkgcat\""/XXXX}" != "${_catlist}" ]; then
+ _pkglist="$(echo -e "${_pkglist}\n${pkgname} ${pkgcat} ON")"
+ else
+ _pkglist="$(echo -e "${_pkglist}\n${pkgname} ${pkgcat} OFF")"
+ fi
+ done < $ANSWER
+
+ # sort by category
+ _pkglist="$(echo "$_pkglist" | sort -f -k 2)"
+
+ DIALOG --checklist "Select Packages To Install." 19 60 12 $_pkglist 2>$ANSWER || return 1
+ PACKAGES="$(cat $ANSWER)"
+ S_SELECT=1
+}
+
+
+# donetwork()
+# Hand-hold through setting up networking
+#
+# args: none
+# returns: 1 on failure
+donetwork() {
+ INTERFACE=""
+ S_DHCP=""
+ local ifaces
+ ifaces=$(ifconfig -a |grep "Link encap:Ethernet"|sed 's/ \+Link encap:Ethernet \+HWaddr \+/ /g')
+
+ if [ "$ifaces" = "" ]; then
+ DIALOG --msgbox "Cannot find any ethernet interfaces. This usually means udev was\nunable to load the module and you must do it yourself. Switch to\nanother VT, load the appropriate module, and run this step again." 18 70
+ return 1
+ fi
+
+ DIALOG --nocancel --ok-label "Select" --menu "Select a network interface" 14 55 7 $ifaces 2>$ANSWER
+ case $? in
+ 0) INTERFACE=$(cat $ANSWER) ;;
+ *) return 1 ;;
+ esac
+
+ DIALOG --yesno "Do you want to use DHCP?" 0 0
+ if [ $? -eq 0 ]; then
+ DIALOG --infobox "Please wait. Polling for DHCP server on $INTERFACE..." 0 0
+ dhcpcd $INTERFACE >$LOG 2>&1
+ if [ $? -ne 0 ]; then
+ DIALOG --msgbox "Failed to run dhcpcd. See $LOG for details." 0 0
+ return 1
+ fi
+ if [ ! $(ifconfig $INTERFACE | grep 'inet addr:') ]; then
+ DIALOG --msgbox "DHCP request failed." 0 0 || return 1
+ fi
+ S_DHCP=1
+ else
+ NETPARAMETERS=""
+ while [ "$NETPARAMETERS" = "" ]; do
+ DIALOG --inputbox "Enter your IP address" 8 65 "192.168.0.2" 2>$ANSWER || return 1
+ IPADDR=$(cat $ANSWER)
+ DIALOG --inputbox "Enter your netmask" 8 65 "255.255.255.0" 2>$ANSWER || return 1
+ SUBNET=$(cat $ANSWER)
+ DIALOG --inputbox "Enter your broadcast" 8 65 "192.168.0.255" 2>$ANSWER || return 1
+ BROADCAST=$(cat $ANSWER)
+ DIALOG --inputbox "Enter your gateway (optional)" 8 65 "192.168.0.1" 2>$ANSWER || return 1
+ GW=$(cat $ANSWER)
+ DIALOG --inputbox "Enter your DNS server IP" 8 65 "192.168.0.1" 2>$ANSWER || return 1
+ DNS=$(cat $ANSWER)
+ DIALOG --inputbox "Enter your HTTP proxy server, for example:\nhttp://name:port\nhttp://ip:port\nhttp://username:password@ip:port\n\n Leave the field empty if no proxy is needed to install." 16 65 "" 2>$ANSWER || return 1
+ PROXY_HTTP=$(cat $ANSWER)
+ DIALOG --inputbox "Enter your FTP proxy server, for example:\nhttp://name:port\nhttp://ip:port\nhttp://username:password@ip:port\n\n Leave the field empty if no proxy is needed to install." 16 65 "" 2>$ANSWER || return 1
+ PROXY_FTP=$(cat $ANSWER)
+ DIALOG --yesno "Are these settings correct?\n\nIP address: $IPADDR\nNetmask: $SUBNET\nGateway (optional): $GW\nDNS server: $DNS\nHTTP proxy server: $PROXY_HTTP\nFTP proxy server: $PROXY_FTP" 0 0
+ case $? in
+ 1) ;;
+ 0) NETPARAMETERS="1" ;;
+ esac
+ done
+ echo "running: ifconfig $INTERFACE $IPADDR netmask $SUBNET broadcast $BROADCAST up" >$LOG
+ ifconfig $INTERFACE $IPADDR netmask $SUBNET broadcast $BROADCAST up >$LOG 2>&1 || DIALOG --msgbox "Failed to setup $INTERFACE interface." 0 0 || return 1
+ if [ "$GW" != "" ]; then
+ route add default gw $GW >$LOG 2>&1 || DIALOG --msgbox "Failed to setup your gateway." 0 0 || return 1
+ fi
+ if [ "$PROXY_HTTP" = "" ]; then
+ unset http_proxy
+ else
+ export http_proxy=$PROXY_HTTP
+ fi
+ if [ "$PROXY_FTP" = "" ]; then
+ unset ftp_proxy
+ else
+ export ftp_proxy=$PROXY_FTP
+ fi
+ echo "nameserver $DNS" >/etc/resolv.conf
+ fi
+ DIALOG --msgbox "The network is configured." 0 0
+ S_NET=1
+}
+
+dogrub() {
+ get_grub_map
+ local grubmenu="$TARGET_DIR/boot/grub/menu.lst"
+ if [ ! -f $grubmenu ]; then
+ DIALOG --msgbox "Error: Couldn't find $grubmenu. Is GRUB installed?" 0 0
+ return 1
+ fi
+ # try to auto-configure GRUB...
+ if [ "$PART_ROOT" != "" -a "$S_GRUB" != "1" ]; then
+ grubdev=$(mapdev $PART_ROOT)
+ local _rootpart="${PART_ROOT}"
+ local _uuid="$(getuuid ${PART_ROOT})"
+ # attempt to use a UUID if the root device has one
+ if [ -n "${_uuid}" ]; then
+ _rootpart="/dev/disk/by-uuid/${_uuid}"
+ fi
+ # look for a separately-mounted /boot partition
+ bootdev=$(mount | grep $TARGET_DIR/boot | cut -d' ' -f 1)
+ if [ "$grubdev" != "" -o "$bootdev" != "" ]; then
+ subdir=
+ if [ "$bootdev" != "" ]; then
+ grubdev=$(mapdev $bootdev)
+ else
+ subdir="/boot"
+ fi
+ # keep the file from being completely bogus
+ if [ "$grubdev" = "DEVICE NOT FOUND" ]; then
+ DIALOG --msgbox "Your root boot device could not be autodetected by setup. Ensure you adjust the 'root (hd0,0)' line in your GRUB config accordingly." 0 0
+ grubdev="(hd0,0)"
+ fi
+ # remove default entries by truncating file at our little tag (#-*)
+ sed -i -e '/#-\*/q'
+ cat >>$grubmenu <<EOF
+
+# (0) Arch Linux
+title Arch Linux
+root $grubdev
+kernel $subdir/vmlinuz26 root=${_rootpart} ro
+initrd $subdir/kernel26.img
+
+# (1) Arch Linux
+title Arch Linux Fallback
+root $grubdev
+kernel $subdir/vmlinuz26 root=${_rootpart} ro
+initrd $subdir/kernel26-fallback.img
+
+# (2) Windows
+#title Windows
+#rootnoverify (hd0,0)
+#makeactive
+#chainloader +1
+EOF
+ fi
+ fi
+
+ DIALOG --msgbox "Before installing GRUB, you must review the configuration file. You will now be put into the editor. After you save your changes and exit the editor, you can install GRUB." 0 0
+ [ "$EDITOR" ] || geteditor
+ $EDITOR $grubmenu
+
+ DEVS=$(finddisks _)
+ DEVS="$DEVS $(findpartitions _)"
+ if [ "$DEVS" = "" ]; then
+ DIALOG --msgbox "No hard drives were found" 0 0
+ return 1
+ fi
+ DIALOG --menu "Select the boot device where the GRUB bootloader will be installed (usually the MBR and not a partition)." 14 55 7 $DEVS 2>$ANSWER || return 1
+ ROOTDEV=$(cat $ANSWER)
+ DIALOG --infobox "Installing the GRUB bootloader..." 0 0
+ cp -a $TARGET_DIR/usr/lib/grub/i386-pc/* $TARGET_DIR/boot/grub/
+ sync
+ # freeze xfs filesystems to enable grub installation on xfs filesystems
+ if [ -x /usr/sbin/xfs_freeze ]; then
+ /usr/sbin/xfs_freeze -f $TARGET_DIR/boot > /dev/null 2>&1
+ /usr/sbin/xfs_freeze -f $TARGET_DIR/ > /dev/null 2>&1
+ fi
+ # look for a separately-mounted /boot partition
+ bootpart=$(mount | grep $TARGET_DIR/boot | cut -d' ' -f 1)
+ if [ "$bootpart" = "" ]; then
+ if [ "$PART_ROOT" = "" ]; then
+ DIALOG --inputbox "Enter the full path to your root device" 8 65 "/dev/sda3" 2>$ANSWER || return 1
+ bootpart=$(cat $ANSWER)
+ else
+ bootpart=$PART_ROOT
+ fi
+ fi
+ DIALOG --defaultno --yesno "Do you have your system installed on software raid?\nAnswer 'YES' to install grub to another hard disk." 0 0
+ if [ $? -eq 0 ]; then
+ DIALOG --menu "Please select the boot partition device, this cannot be autodetected!\nPlease redo grub installation for all partitions you need it!" 14 55 7 $DEVS 2>$ANSWER || return 1
+ bootpart=$(cat $ANSWER)
+ fi
+ bootpart=$(mapdev $bootpart)
+ bootdev=$(mapdev $ROOTDEV)
+ if [ "$bootpart" = "" ]; then
+ DIALOG --msgbox "Error: Missing/Invalid root device: $bootpart" 0 0
+ return 1
+ fi
+ if [ "$bootpart" = "DEVICE NOT FOUND" -o "$bootdev" = "DEVICE NOT FOUND" ]; then
+ DIALOG --msgbox "GRUB root and setup devices could not be auto-located. You will need to manually run the GRUB shell to install a bootloader." 0 0
+ return 1
+ fi
+ $TARGET_DIR/sbin/grub --no-floppy --batch >/tmp/grub.log 2>&1 <<EOF
+root $bootpart
+setup $bootdev
+quit
+EOF
+ cat /tmp/grub.log >$LOG
+ # unfreeze xfs filesystems
+ if [ -x /usr/sbin/xfs_freeze ]; then
+ /usr/sbin/xfs_freeze -u $TARGET_DIR/boot > /dev/null 2>&1
+ /usr/sbin/xfs_freeze -u $TARGET_DIR/ > /dev/null 2>&1
+ fi
+
+ if grep "Error [0-9]*: " /tmp/grub.log >/dev/null; then
+ DIALOG --msgbox "Error installing GRUB. (see $LOG for output)" 0 0
+ return 1
+ fi
+ DIALOG --msgbox "GRUB was successfully installed." 0 0
+ S_GRUB=1
+}
+
+
+ # exit if network wasn't configured in installer
+ if [ $S_NET -eq 0 ]; then
+ return 1
+ fi
+
+ ask_yesno "Do you want to use the network settings from the installer in rc.conf and resolv.conf?\n\nIf you used Proxy settings, they will be written to /etc/profile.d/proxy.sh" || return 1
+
+ if [ $S_DHCP -ne 1 ]; then
+ auto_network
+fi
+ \ No newline at end of file
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 14:46:43 +0000