summaryrefslogtreecommitdiff
path: root/src/lib-archboot/setup-misc.sh
diff options
context:
space:
mode:
Diffstat (limited to 'src/lib-archboot/setup-misc.sh')
-rw-r--r--src/lib-archboot/setup-misc.sh245
1 files changed, 0 insertions, 245 deletions
diff --git a/src/lib-archboot/setup-misc.sh b/src/lib-archboot/setup-misc.sh
deleted file mode 100644
index 9bd47e6..0000000
--- a/src/lib-archboot/setup-misc.sh
+++ /dev/null
@@ -1,245 +0,0 @@
-#!/bin/sh
-
-set_clock()
-{
- if [ -e /usr/bin/tz ]; then
- tz
- else
- DIALOG --msgbox "Error:\ntz script not found, aborting clock setting" 0 0
- fi
-}
-
-set_keyboard()
-{
- if [ -e /usr/bin/km ]; then
- km
- else
- DIALOG --msgbox "Error:\nkm script not found, aborting keyboard and console setting" 0 0
- fi
-}
-
-configure_system()
-{
- HWDETECT=""
- HWPARAMETER=""
- DSDT_ENABLE=""
- DIALOG --yesno "PRECONFIGURATION?\n-----------------\n\nDo you want to use 'hwdetect' for:\n'/etc/rc.conf' and '/etc/mkinitcpio.conf'?\n\nThis ensures consistent ordering of your hard disk controllers,\nnetwork and sound devices.\n\nIt is recommended to say 'YES' here." 18 70 && HWDETECT="yes"
- if [ "$HWDETECT" = "yes" ]; then
- if /usr/bin/vmware-detect; then
- HWPARAMETER="$HWPARAMETER --vmware"
- fi
- grep -qw ide-legacy /proc/cmdline && HWPARAMETER="$HWPARAMETER --ide-legacy"
- DIALOG --defaultno --yesno "Do you need support for booting from usb devices?" 0 0 && HWPARAMETER="$HWPARAMETER --usb"
- DIALOG --defaultno --yesno "Do you need support for booting from firewire devices?" 0 0 && HWPARAMETER="$HWPARAMETER --fw"
- DIALOG --defaultno --yesno "Do you need support for booting from pcmcia devices?" 0 0 && HWPARAMETER="$HWPARAMETER --pcmcia"
- DIALOG --defaultno --yesno "Do you need support for booting from nfs shares?" 0 0 && HWPARAMETER="$HWPARAMETER --nfs"
- DIALOG --defaultno --yesno "Do you need support for booting from software raid arrays?" 0 0 && HWPARAMETER="$HWPARAMETER --raid"
- if [ -e $DESTDIR/lib/initcpio/hooks/raid-partitions ]; then
- DIALOG --defaultno --yesno "Do you need support for booting from software raid mdp/partition arrays?" 0 0 && HWPARAMETER="$HWPARAMETER --raid-partitions"
- fi
- if [ -e $DESTDIR/lib/initcpio/hooks/dmraid ]; then
- DIALOG --defaultno --yesno "Do you need support for booting from hardware dmraid arrays?" 0 0 && HWPARAMETER="$HWPARAMETER --dmraid"
- fi
- DIALOG --defaultno --yesno "Do you need support for booting from lvm2 volumes?" 0 0 && HWPARAMETER="$HWPARAMETER --lvm2"
- DIALOG --defaultno --yesno "Do you need support for booting from encrypted volumes?" 0 0 && HWPARAMETER="$HWPARAMETER --encrypt"
- DIALOG --defaultno --yesno "Do you need support for booting the kernel with a custom DSDT file?" 0 0 && DSDT_ENABLE=1
- if [ "$DSDT_ENABLE" = "1" ]; then
- while [ "$DSDT" = "" ]; do
- DIALOG --inputbox "Enter the custom DSDT file (with full path)" 8 65 "" 2>$ANSWER || return 1
- DSDT=$(cat $ANSWER)
- if [ -s "$DSDT" ]; then
- cp $DSDT $DESTDIR/lib/initcpio/custom.dsdt
- HWPARAMETER="$HWPARAMETER --dsdt"
- else
- DIALOG --msgbox "ERROR: You have entered a wrong file name, please enter again." 0 0
- DSDT=""
- fi
- done
- fi
- # add always keymap
- HWPARAMETER="$HWPARAMETER --keymap"
- HWDETECTHOSTCONTROLLER=""
- HWDETECTHOOKS=""
- HWDETECTRC=""
- HWDETECTHOSTCONTROLLER="$(hwdetect --hostcontroller $HWPARAMETER)"
- HWDETECTHOOKS="$(hwdetect --hooks-dir=$DESTDIR/lib/initcpio/install --hooks $HWPARAMETER)"
- HWDETECTRC="$(echo $(hwdetect --net --sound $HWPARAMETER)| sed -e 's#.*) ##g')"
- [ -n "$HWDETECTHOSTCONTROLLER" ] && sed -i -e "s/^MODULES=.*/$HWDETECTHOSTCONTROLLER/g" ${DESTDIR}/etc/mkinitcpio.conf
- [ -n "$HWDETECTHOOKS" ] && sed -i -e "s/^HOOKS=.*/$HWDETECTHOOKS/g" ${DESTDIR}/etc/mkinitcpio.conf
- [ -n "$HWDETECTRC" ] && sed -i -e "s/^MODULES=.*/$HWDETECTRC/g" ${DESTDIR}/etc/rc.conf
- fi
- if [ -s /tmp/.keymap ]; then
- DIALOG --yesno "Do you want to use the keymap: $(cat /tmp/.keymap | sed -e 's/\..*//g') in rc.conf?" 0 0 && sed -i -e "s/^KEYMAP=.*/KEYMAP=\"$(cat /tmp/.keymap | sed -e 's/\..*//g')\"/g" ${DESTDIR}/etc/rc.conf
- fi
- if [ -s /tmp/.font ]; then
- DIALOG --yesno "Do you want to use the consolefont: $(cat /tmp/.font | sed -e 's/\..*//g') in rc.conf?" 0 0 && sed -i -e "s/^CONSOLEFONT=.*/CONSOLEFONT=\"$(cat /tmp/.font | sed -e 's/\..*//g')\"/g" ${DESTDIR}/etc/rc.conf
- fi
- if [ -s /tmp/.hardwareclock ]; then
- DIALOG --yesno "Do you want to use the hardwareclock: $(cat /tmp/.hardwareclock | sed -e 's/\..*//g') in rc.conf?" 0 0 && sed -i -e "s/^HARDWARECLOCK=.*/HARDWARECLOCK=\"$(cat /tmp/.hardwareclock | sed -e 's/\..*//g')\"/g" ${DESTDIR}/etc/rc.conf
- fi
- if [ -s /tmp/.timezone ]; then
- DIALOG --yesno "Do you want to use the timezone: $(cat /tmp/.timezone | sed -e 's/\..*//g') in rc.conf?" 0 0 && sed -i -e "s#^TIMEZONE=.*#TIMEZONE=\"$(cat /tmp/.timezone | sed -e 's/\..*//g')\"#g" ${DESTDIR}/etc/rc.conf
- fi
- if [ "$S_NET" = "1" ]; then
- DIALOG --yesno "Do you want to use the previous network settings in rc.conf and resolv.conf?\nIf you used Proxy settings, they will be written to /etc/profile.d/proxy.sh" 0 0 && (
- if [ "$S_DHCP" != "1" ]; then
- sed -i -e "s#eth0=\"eth0#$INTERFACE=\"$INTERFACE#g" ${DESTDIR}/etc/rc.conf
- sed -i -e "s# 192.168.0.2 # $IPADDR #g" ${DESTDIR}/etc/rc.conf
- sed -i -e "s# 255.255.255.0 # $SUBNET #g" ${DESTDIR}/etc/rc.conf
- sed -i -e "s# 192.168.0.255\"# $BROADCAST\"#g" ${DESTDIR}/etc/rc.conf
- sed -i -e "s#eth0)#$INTERFACE)#g" ${DESTDIR}/etc/rc.conf
- if [ "$GW" != "" ]; then
- sed -i -e "s#gw 192.168.0.1#gw $GW#g" ${DESTDIR}/etc/rc.conf
- sed -i -e "s#!gateway#gateway#g" ${DESTDIR}/etc/rc.conf
- fi
- echo "nameserver $DNS" >> ${DESTDIR}/etc/resolv.conf
- else
- sed -i -e "s#eth0=\"eth0.*#$INTERFACE=\"dhcp\"#g" ${DESTDIR}/etc/rc.conf
- fi
- if [ "$PROXY_HTTP" != "" ]; then
- echo "export http_proxy=$PROXY_HTTP" >> ${DESTDIR}/etc/profile.d/proxy.sh;
- chmod a+x ${DESTDIR}/etc/profile.d/proxy.sh
- fi
- if [ "$PROXY_FTP" != "" ]; then
- echo "export ftp_proxy=$PROXY_FTP" >> ${DESTDIR}/etc/profile.d/proxy.sh;
- chmod a+x ${DESTDIR}/etc/profile.d/proxy.sh
- fi)
- fi
- [ "$EDITOR" ] || geteditor
- DONE=0
- FILE=""
- while [ "$EDITOR" != "" -a "$DONE" = "0" ]; do
- if [ -n "$FILE" ]; then
- DEFAULT="--default-item $FILE"
- else
- DEFAULT=""
- fi
- dialog $DEFAULT --backtitle "$TITLE" --menu "Configuration" 19 80 16 \
- "/etc/rc.conf" "System Config" \
- "/etc/fstab" "Filesystem Mountpoints" \
- "/etc/mkinitcpio.conf" "Initramfs Config" \
- "/etc/modprobe.conf" "Kernel Modules (for 2.6.x)" \
- "/etc/resolv.conf" "DNS Servers" \
- "/etc/hosts" "Network Hosts" \
- "/etc/hosts.deny" "Denied Network Services" \
- "/etc/hosts.allow" "Allowed Network Services" \
- "/etc/locale.gen" "Glibc Locales" \
- "Root-Password" "Set the root password" \
- "Pacman-Mirror" "Set the primary pacman mirror" \
- "_" "Return to Main Menu" 2>$ANSWER
- FILE=$(cat $ANSWER)
-
- if [ "$FILE" = "_" -o "$FILE" = "" ]; then
- mount -t proc none $DESTDIR/proc
- mount -t sysfs none $DESTDIR/sys
- mount -o bind /dev $DESTDIR/dev
- # all pacman output goes to /tmp/pacman.log, which we tail into a dialog
- ( \
- touch /tmp/setup-mkinitcpio-running
- echo "Initramfs progress ..." > /tmp/initramfs.log; echo >> /tmp/initramfs.log
- chroot $DESTDIR /sbin/mkinitcpio -p kernel26 >>/tmp/initramfs.log 2>&1
- echo >> /tmp/initramfs.log
- rm -f /tmp/setup-mkinitcpio-running
- ) &
- sleep 2
- dialog --backtitle "$TITLE" --title "Rebuilding initramfs images ..." --no-kill --tailboxbg "/tmp/initramfs.log" 18 70
- while [ -f /tmp/setup-mkinitcpio-running ]; do
- sleep 1
- done
- umount $DESTDIR/proc $DESTDIR/sys $DESTDIR/dev
- DONE=1
- else
- if [ "$FILE" = "/etc/mkinitcpio.conf" ]; then
- DIALOG --msgbox "The mkinitcpio.conf file controls which modules will be placed into the initramfs for your system's kernel.\n\n- Non US keymap users should add 'keymap' to HOOKS= array\n- USB keyboard users should add 'usbinput' to HOOKS= array\n- If you install under VMWARE add 'BusLogic' to MODULES= array\n- raid, lvm2, encrypt are not enabled by default\n- 2 or more disk controllers, please specify the correct module\n loading order in MODULES= array \n\nMost of you will not need to change anything in this file." 18 70
- HOOK_ERROR=""
- fi
- if ! [ "$FILE" = "Root-Password" -o "$FILE" = "Pacman-Mirror" ]; then
- if [ "$FILE" = "/etc/locale.gen" ]; then
- # enable glibc locales from rc.conf
- for i in $(grep "^LOCALE" ${DESTDIR}/etc/rc.conf | sed -e 's/.*="//g' -e's/\..*//g'); do
- sed -i -e "s/^#$i/$i/g" ${DESTDIR}/etc/locale.gen
- done
- fi
- $EDITOR ${DESTDIR}${FILE}
- else
- if [ "$FILE" = "Root-Password" ]; then
- ROOTPW=""
- while [ "$ROOTPW" = "" ]; do
- chroot ${DESTDIR} passwd root && ROOTPW=1
- done
- else
- SAMEMIRROR=""
- mirrorlist="${DESTDIR}/etc/pacman.d/mirrorlist"
- if [ "$MODE" = "ftp" -a "${SYNC_SERVER}" != "" ]; then
- DIALOG --yesno "Would you like to use the same MIRROR you used for installation?" 0 0&& SAMEMIRROR="yes"
- fi
- if ! [ "$SAMEMIRROR" = "yes" ]; then
- DIALOG --msgbox "WARNING:\n\n- Please keep in mind ftp.archlinux.org is throttled!\n- Please select another mirror to get full download speed." 18 70
- # this will find all mirrors in the mirrorlist, commented out or not
- PAC_MIRRORS=$(egrep -o '((ftp)|(http))://[^/]*' "${DESTDIR}/etc/pacman.d/mirrorlist" | sed 's|$| _|g')
- DIALOG --menu "Select the primary Pacman mirror" 14 55 7 $PAC_MIRRORS "Custom" "_" 2>$ANSWER || return 1
- PAC_SYNC_SERVER="$(cat $ANSWER)"
- if [ "$PAC_SYNC_SERVER" = "Custom" ]; then
- DIALOG --inputbox "Enter the full URL to packages, for example:\nhttp://server.org/archlinux/\$repo/os/$(uname -m)" 8 65 "http://" 2>$ANSWER || return 1
- PAC_SYNC_SERVER="$(cat $ANSWER)"
- fi
- else
- PAC_SYNC_SERVER="$(echo ${SYNC_URL} | sed 's/core/\$repo/g')"
- fi
- # comment out all existing mirrors
- sed -i -e 's/^Server/#Server/g' "$mirrorlist"
- # add our new entry at the end of the file
- echo "# Setup-configured entry" >> "$mirrorlist"
- echo Server = $(egrep -o "$PAC_SYNC_SERVER.*" "$mirrorlist") >> "$mirrorlist"
- fi
- fi
- if [ "$FILE" = "/etc/locale.gen" ]; then
- chroot ${DESTDIR} locale-gen
- fi
- if [ "$FILE" = "/etc/mkinitcpio.conf" ]; then
- for i in $(cat ${DESTDIR}/etc/mkinitcpio.conf | grep ^HOOKS | sed -e 's/"//g' -e 's/HOOKS=//g'); do
- [ -e ${DESTDIR}/lib/initcpio/install/$i ] || HOOK_ERROR=1
- done
- if [ "$HOOK_ERROR" = "1" ]; then
- DIALOG --msgbox "ERROR: Detected error in 'HOOKS=' line, please correct HOOKS= in /etc/mkinitcpio.conf!" 18 70
- fi
- fi
- if [ "$FILE" = "/etc/rc.conf" ]; then
- TIMEZONE=""
- eval $(grep "^TIMEZONE" ${DESTDIR}/etc/rc.conf)
- if [ "$TIMEZONE" != "" -a -e ${DESTDIR}/usr/share/zoneinfo/$TIMEZONE ]; then
- cp ${DESTDIR}/usr/share/zoneinfo/$TIMEZONE ${DESTDIR}/etc/localtime
- cp ${DESTDIR}/usr/share/zoneinfo/$TIMEZONE /etc/localtime
- fi
- if [ ! -f ${DESTDIR}/var/lib/hwclock/adjtime ]; then
- echo "0.0 0 0.0" > ${DESTDIR}/var/lib/hwclock/adjtime
- fi
- eval $(grep "^HARDWARECLOCK" ${DESTDIR}/etc/rc.conf)
- if [ "$HARDWARECLOCK" = "UTC" ]; then
- chroot ${DESTDIR} /sbin/hwclock --directisa --utc --hctosys
- else
- chroot ${DESTDIR} /sbin/hwclock --directisa --localtime --hctosys
- fi
- # ugly hack:
- for line in $(sort --reverse -t: -k3 /tmp/.parts); do
- PART=$(echo $line | cut -d: -f 1)
- FSTYPE=$(echo $line | cut -d: -f 2)
- MP=$(echo $line | cut -d: -f 3)
- if [ "$MP" != "swap" ]; then
- umount ${DESTDIR}${MP}
- fi
- done
- for line in $(sort -t: -k3 /tmp/.parts); do
- PART=$(echo $line | cut -d: -f 1)
- FSTYPE=$(echo $line | cut -d: -f 2)
- MP=$(echo $line | cut -d: -f 3)
- if [ "$MP" != "swap" ]; then
- mount -t ${FSTYPE} ${PART} ${DESTDIR}${MP}
- fi
- done
- # end of hack
- fi
- fi
- done
-}
-
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-10-27 11:18:57 +0000