From 0051a46eed53e2bdd11aa10a1255c21807d4d64f Mon Sep 17 00:00:00 2001 From: "pyther@pyther.net" Date: Sun, 13 Mar 2011 13:15:22 -0400 Subject: Update Documentation to reflect use of Isolinux on Install Medium Signed-off-by: Dieter Plaetinck --- doc/official_installation_guide_en | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'doc') diff --git a/doc/official_installation_guide_en b/doc/official_installation_guide_en index d73ed8e..b7c68ff 100644 --- a/doc/official_installation_guide_en +++ b/doc/official_installation_guide_en @@ -177,14 +177,11 @@ so make sure you don't have any important files on it before doing this. ### Pre-boot Make sure your BIOS is set in a way to allow booting from your CD-ROM or USB -device. -Reboot your computer with the Arch Linux Installation CD in the drive -or the USB stick plugged in the port. Once the installation medium has started -booting you will see the Arch Linux logo and a grub menu waiting for your -selection. -Most likely you can just hit enter at this point. -If Grub hangs, you're one of the unlucky few whose CD-rom drive doesn't work -with grub and you should try the isolinux image. +device. Reboot your computer with the Arch Linux Installation CD in the drive or +the USB stick plugged in the port. Once the installation medium has started +booting, you will see the Arch Linux logo and an Isolinux menu waiting for your +selection. Most likely you can just hit enter at this point. + ### Post-boot At the end of the boot procedure, you should be at a login prompt with some -- cgit v1.2.3-54-g00ecf