diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 206 |
1 files changed, 38 insertions, 168 deletions
@@ -556,10 +556,6 @@ This will run eight (for now) queue handlers: of registered users. * xmppconfirmhandler.php - sends confirmation messages to registered users. -* twitterqueuehandler.php - sends queued notices to Twitter for user - who have opted to set up Twitter bridging. -* facebookqueuehandler.php - sends queued notices to Facebook for users - of the built-in Facebook application. Note that these queue daemons are pretty raw, and need your care. In particular, they leak memory, and you may want to restart them on a @@ -577,101 +573,6 @@ our kind of hacky home-grown DB-based queue solution. See the "queues" config section below for how to configure to use STOMP. As of this writing, the software has been tested with ActiveMQ ( -Twitter Bridge --------------- - -* OAuth - -As of 0.8.1, OAuth is used to to access protected resources on Twitter -instead of HTTP Basic Auth. To use Twitter bridging you will need -to register your instance of StatusNet as an application on Twitter -(http://twitter.com/apps), and update the following variables in your -config.php with the consumer key and secret Twitter generates for you: - - $config['twitter']['consumer_key'] = 'YOURKEY'; - $config['twitter']['consumer_secret'] = 'YOURSECRET'; - -When registering your application with Twitter set the type to "Browser" -and your Callback URL to: - - http://example.org/mublog/twitter/authorization - -The default access type should be, "Read & Write". - -* Importing statuses from Twitter - -To allow your users to import their friends' Twitter statuses, you will -need to enable the bidirectional Twitter bridge in config.php: - - $config['twitterbridge']['enabled'] = true; - -and run the TwitterStatusFetcher daemon (scripts/twitterstatusfetcher.php). -Additionally, you will want to set the integration source variable, -which will keep notices posted to Twitter via StatusNet from looping -back. The integration source should be set to the name of your -application, exactly as you specified it on the settings page for your -StatusNet application on Twitter, e.g.: - - $config['integration']['source'] = 'YourApp'; - -* Twitter Friends Syncing - -Users may set a flag in their settings ("Subscribe to my Twitter friends -here" under the Twitter tab) to have StatusNet attempt to locate and -subscribe to "friends" (people they "follow") on Twitter who also have -accounts on your StatusNet system, and who have previously set up a link -for automatically posting notices to Twitter. - -As of 0.8.0, this is no longer accomplished via a cron job. Instead you -must run the SyncTwitterFriends daemon (scripts/synctwitterfreinds.php). - -Built-in Facebook Application ------------------------------ - -StatusNet's Facebook application allows your users to automatically -update their Facebook statuses with their latest notices, invite -their friends to use the app (and thus your site), view their notice -timelines, and post notices -- all from within Facebook. The application -is built into StatusNet and runs on your host. For automatic Facebook -status updating to work you will need to enable queuing and run the -facebookqueuehandler.php daemon (see the "Queues and daemons" section -above). - -Quick setup instructions*: - -Install the Facebook Developer application on Facebook: - - http://www.facebook.com/developers/ - -Use it to create a new application and generate an API key and secret. -Uncomment the Facebook app section of your config.php and copy in the -key and secret, e.g.: - - # Config section for the built-in Facebook application - $config['facebook']['apikey'] = 'APIKEY'; - $config['facebook']['secret'] = 'SECRET'; - -In Facebook's application editor, specify the following URLs for your app: - -- Canvas Callback URL: http://example.net/mublog/facebook/ -- Post-Remove Callback URL: http://example.net/mublog/facebook/remove -- Post-Add Redirect URL: http://apps.facebook.com/yourapp/ -- Canvas Page URL: http://apps.facebook.com/yourapp/ - -(Replace 'example.net' with your host's URL, 'mublog' with the path -to your StatusNet installation, and 'yourapp' with the name of the -Facebook application you created.) - -Additionally, Choose "Web" for Application type in the Advanced tab. -In the "Canvas setting" section, choose the "FBML" for Render Method, -"Smart Size" for IFrame size, and "Full width (760px)" for Canvas Width. -Everything else can be left with default values. - -*For more detailed instructions please see the installation guide on the -StatusNet wiki: - - http://status.net/trac/wiki/FacebookApplication - Sitemaps -------- @@ -869,40 +770,8 @@ to update it. Notice inboxes -------------- -Before version 0.6.2, the page showing all notices from people the -user is subscribed to ("so-and-so with friends") was calculated at run -time. Starting with 0.6.2, we have a new data structure for holding a -user's "notice inbox". (Note: distinct from the "message inbox", which -is the "inbox" tab in the UI. The notice inbox appears under the -"Personal" tab.) - -Notices are added to the inbox when they're created. This speeds up -the query considerably, and also allows us the opportunity, in the -future, to add different kind of notices to an inbox -- like @-replies -or subscriptions to search terms or hashtags. - -Notice inboxes are enabled by default for new installations. If you -are upgrading an existing site, this means that your users will see -empty "Personal" pages. The following steps will help you fix the -problem. - -0. $config['inboxes']['enabled'] can be set to one of three values. If - you set it to 'false', the site will work as before. Support for this - will probably be dropped in future versions. -1. Setting the flag to 'transitional' means that you're in transition. - In this mode, the code will run the "new query" or the "old query" - based on whether the user's inbox has been updated. -2. After setting the flag to "transitional", you can run the - fixup_inboxes.php script to create the inboxes. You may want to set - the memory limit high. You can re-run it without ill effect. -3. When fixup_inboxes is finished, you can set the enabled flag to - 'true'. - -NOTE: As of version 0.8.1 notice inboxes are automatically trimmed back - to ~1000 notices every once in a while. - -NOTE: we will drop support for non-inboxed sites in the 0.9.x version -of StatusNet. It's time to switch now! +Notice inboxes are now required. If you don't have inboxes enabled, +StatusNet will no longer run. UTF-8 Database -------------- @@ -998,8 +867,6 @@ closed: If set to 'true', will disallow registration on your site. the service, *then* set this variable to 'true'. inviteonly: If set to 'true', will only allow registration if the user was invited by an existing user. -openidonly: If set to 'true', will only allow registrations and logins - through OpenID. private: If set to 'true', anonymous users will be redirected to the 'login' page. Also, API methods that normally require no authentication will require it. Note that this does not turn @@ -1027,6 +894,9 @@ shorturllength: Length of URL at which URLs in a message exceeding 140 dupelimit: minimum time allowed for one person to say the same thing twice. Default 60s. Anything lower is considered a user or UI error. +textlimit: default max size for texts in the site. Defaults to 140. + 0 means no limit. Can be fine-tuned for notices, messages, + profile bios and group descriptions. db -- @@ -1066,6 +936,14 @@ utf8: whether to talk to the database in UTF-8 mode. This is the default with new installations, but older sites may want to turn it off until they get their databases fixed up. See "UTF-8 database" above for details. +schemacheck: when to let plugins check the database schema to add + tables or update them. Values can be 'runtime' (default) + or 'script'. 'runtime' can be costly (plugins check the + schema on every hit, adding potentially several db + queries, some quite long), but not everyone knows how to + run a script. If you can, set this to 'script' and run + scripts/checkschema.php whenever you install or upgrade a + plugin. syslog ------ @@ -1227,14 +1105,6 @@ For configuring invites. enabled: Whether to allow users to send invites. Default true. -openid ------- - -For configuring OpenID. - -enabled: Whether to allow users to register and login using OpenID. Default - true. - tag --- @@ -1312,24 +1182,11 @@ For SMS integration. enabled: Whether to enable SMS integration. Defaults to true. Queues should also be enabled. -twitter -------- - -For Twitter integration - -enabled: Whether to enable Twitter integration. Defaults to true. - Queues should also be enabled. - integration ----------- A catch-all for integration with other systems. -source: The name to use for the source of posts to Twitter. Defaults - to 'statusnet', but if you request your own source name from - Twitter <http://twitter.com/help/request_source>, you can use - that here instead. Status updates on Twitter will then have - links to your site. taguri: base for tag:// URIs. Defaults to site-server + ',2009'. inboxes @@ -1337,9 +1194,8 @@ inboxes For notice inboxes. -enabled: A three-valued flag for whether to use notice inboxes (see - upgrading info above for notes about this change). Can be - 'false', 'true', or '"transitional"'. +enabled: No longer used. If you set this to something other than true, + StatusNet will no longer run. throttle -------- @@ -1361,6 +1217,8 @@ banned: an array of usernames and/or profile IDs of 'banned' profiles. The site will reject any notices by these users -- they will not be accepted at all. (Compare with blacklisted users above, whose posts just won't show up in the public stream.) +biolimit: max character length of bio; 0 means no limit; null means to use + the site text limit default. newuser ------- @@ -1457,6 +1315,9 @@ Options for group functionality. maxaliases: maximum number of aliases a group can have. Default 3. Set to 0 or less to prevent aliases in a group. +desclimit: maximum number of characters to allow in group descriptions. + null (default) means to use the site-wide text limits. 0 + means no limit. oohembed -------- @@ -1503,15 +1364,6 @@ dir: directory to write backgrounds too. Default is '/background/' path: path to backgrounds. Default is sub-path of install path; note that you may need to change this if you change site-path too. -twitterbridge -------------- - -A bi-direction bridge to Twitter (http://twitter.com/). - -enabled: default false. If true, will show user's Twitter friends' - notices in their inbox and faves pages, only to the user. You - must also run the twitterstatusfetcher.php script. - ping ---- @@ -1535,6 +1387,24 @@ linkcolor: Hex color of all links. backgroundimage: Image to use for the background. disposition: Flags for whether or not to tile the background image. +notice +------ + +Configuration options specific to notices. + +contentlimit: max length of the plain-text content of a notice. + Default is null, meaning to use the site-wide text limit. + 0 means no limit. + +message +------- + +Configuration options specific to messages. + +contentlimit: max length of the plain-text content of a message. + Default is null, meaning to use the site-wide text limit. + 0 means no limit. + Plugins ======= |