| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
send to.
Must be set to a value that matches one of the entries in $config['queue']['stomp_server'] array, otherwise ignored.
|
|
disabling them gets basic message delivery working under MorbidQ, and may help with RabbitMQ etc.
I swapped the settings from negative to positive ($config['queue']['stomp_transactions'] = false rather than $config['queue']['stomp_no_transactions'] = true), gave them defaults (both on for best ActiveMQ experience), and added notes to the README about configuring them.
|
|
Signed-off-by: Eugene Crosser <crosser@average.org>
|
|
queues without running through the complete site list, which is ok at 1k sites but too slow at 10k.
All breakout queues that we're going to need to listen to now need to be explicitly listed in $config['queue']['breakout'].
Until XMPP is moved to component model, this setting will let the individual processes work with their own queues:
$config['queue']['breakout'][] = 'xmpp/xmppout/' . $config['site']['nickname'];
|
|
- Multiplexing queues into groups and for multiple sites.
- Sharing vs breakout configurable per site and per queue via $config['queue']['breakout']
- Detect how many times a message is redelivered, discard if it's killed too many daemons
- count configurable with $config['queue']['max_retries']
- can dump the items to files in $config['queue']['dead_letter_dir']
Queue daemon memory & resource leak fixes:
- avoid unnecessary reconnections to memcached server (switch persistent connections back in on second initialization, assuming it's child process)
- monkey-patch for leaky .ini loads in DB_DataObject::databaseStructure() - was leaking 200k per active switch
- applied leak fixes to Status_network as well, using intermediate base Safe_DataObject for both it and Memcache_DataObject
Misc queue fixes:
- correct handling of child processes exiting due to signal termination instead of regular exit
- shutdown instead of infinite respawn loop if we're already past the soft memory limit at startup
- Added --all option for xmppdaemon... still opens one xmpp connection per site that has xmpp active
Cache updates:
- add Cache::increment() method with native support for memcached atomic increment
|
|
|
|
* skip unnecessary unsubscribes on graceful shutdown -- takes a long time for many queues, slows down our restarts when hitting graceful mem limit
* fix control channel (was broken when we switched to support multiple queue servers)
|
|
|
|
If an array of multiple servers is put in $config['queue']['stomp_server'], enqueues will pick a random server to send to (failing over automatically if any are down).
Queue handling daemons connect all servers so they get events no matter where they were delivered.
In case of disconnection, daemons should now handle it gracefully and attempt to reconnect every 60 seconds or so, automatically resubscribing to all queues once it's back up.
Can put to 'native' failover for reads as well by disabling $config['stomp']['manual_failover'] = false; but this is untested and may explode in addition to requiring that your ActiveMQ cluster actually be set up to handle its own data distribution.
Additionally, can choose which queues to mark as persistent by setting $config['stomp']['persistent'] to an array of queue names.
|
|
disable persistence when we queue items
|
|
|
|
discard them even though persistence is enabled on the broker. :) (Thanks Aric!)
|
|
update to listen to a newly added or reconfigured site.
queuectl.php --update -s<site>
queuectl.php --stop
queuectl.php --restart
Default control channel is /topic/statusnet-control. For external utilities to send a site update ping direct to the queue server, connect via Stomp and send a message formatted thus:
update:<nickname>
(Nickname here, *not* server hostname! The rest of the queues will be updated to use nicknames later.)
Note that all currently-connected queue daemons will get these notifications, including both queuedaemon.php and xmppdaemon.php. (XMPP will ignore site update requests for sites that it's not handling.)
Limitations:
* only implemented for stomp queue manager so far
* --update may not yet handle a changed server name properly
* --restart won't reload PHP code files that were already loaded at startup. Still need to stop and restart the daemons from 'outside' when updating code base.
|
|
lack of an ACK if PHP dies actually triggers redelivery.
Previously, messages once delivered would just get stuck in the queue seemingly forever if they never got ACKed.
Note this could lead to partial duplication, for instance if the OMB or Twitter queue handlers die after 1/2 of the outgoing sends.
Recommendations:
* catch exceptions more aggressively within queue handlers (so only PHP fatal errors are likely to kill in the middle)
* for processing that involves sending to multiple clients, consider a second queue similar to the XMPP output, eg for OMB:
- first queue gets delivery list and builds message data, enqueueing it for each target address
- second queue can handle each individual outgoing message (and attempt redelivery etc separately)
This would also protect better against a recurring error preventing delivery in the second part, and could spread out any slow sends over multiple threads.
|
|
non-Notice objects.
Queue handlers for XMPP individual & firehose output now send their XML stanzas
to another output queue instead of connecting directly to the chat server. This
lets us have as many general processing threads as we need, while all actual
XMPP input and output go through a single daemon with a single connection open.
This avoids problems with multiple connected resources:
* multiple windows shown in some chat clients (psi, gajim, kopete)
* extra load on server
* incoming message delivery forwarding issues
Database changes:
* queue_item drops 'notice_id' in favor of a 'frame' blob.
This is based on Craig Andrews' work branch to generalize queues to take any
object, but conservatively leaving out the serialization for now.
Table updater (preserves any existing queued items) in db/rc3to09.sql
Code changes to watch out for:
* Queue handlers should now define a handle() method instead of handle_notice()
* QueueDaemon and XmppDaemon now share common i/o (IoMaster) and respawning
thread management (RespawningDaemon) infrastructure.
* The polling XmppConfirmManager has been dropped, as the message is queued
directly when saving IM settings.
* Enable $config['queue']['debug_memory'] to output current memory usage at
each run through the event loop to watch for memory leaks
To do:
* Adapt XMPP i/o to component connection mode for multi-site support.
* XMPP input can also be broken out to a queue, which would allow the actual
notice save etc to be handled by general queue threads.
* Make sure there are no problems with simply pushing serialized Notice objects
to queues.
* Find a way to improve interactive performance of the database-backed queue
handler; polling is pretty painful to XMPP.
* Possibly redo the way QueueHandlers are injected into a QueueManager. The
grouping used to split out the XMPP output queue is a bit awkward.
|
|
xmpp threads
|
|
environment
|
|
daemon.
Key changes:
* Initialization code moved from common.php to StatusNet class;
can now switch configurations during runtime.
* As a consequence, configuration files must now be idempotent...
Be careful with constant, function or class definitions.
* Control structure for daemons/QueueManager/QueueHandler has been refactored;
the run loop is now managed by IoMaster run via scripts/queuedaemon.php
IoManager subclasses are woken to handle socket input or polling, and may
cover multiple sites.
* Plugins can implement notice queue handlers more easily by registering a
QueueHandler class; no more need to add a daemon.
The new QueueDaemon runs from scripts/queuedaemon.php:
* This replaces most of the old *handler.php scripts; they've been refactored
to the bare handler classes.
* Spawns multiple child processes to spread load; defaults to CPU count on
Linux and Mac OS X systems, or override with --threads=N
* When multithreaded, child processes are automatically respawned on failure.
* Threads gracefully shut down and restart when passing a soft memory limit
(defaults to 90% of memory_limit), limiting damage from memory leaks.
* Support for UDP-based monitoring: http://www.gitorious.org/snqmon
Rough control flow diagram:
QueueDaemon -> IoMaster -> IoManager
QueueManager [listen or poll] -> QueueHandler
XmppManager [ping & keepalive]
XmppConfirmManager [poll updates]
Todo:
* Respawning features not currently available running single-threaded.
* When running single-site, configuration changes aren't picked up.
* New sites or config changes affecting queue subscriptions are not yet
handled without a daemon restart.
* SNMP monitoring output to integrate with general tools (nagios, ganglia)
* Convert XMPP confirmation message sends to use stomp queue instead of polling
* Convert xmppdaemon.php to IoManager?
* Convert Twitter status, friends import polling daemons to IoManager
* Clean up some error reporting and failure modes
* May need to adjust queue priorities for best perf in backlog/flood cases
Detailed code history available in my daemon-work branch:
http://www.gitorious.org/~brion/statusnet/brion-fixes/commits/daemon-work
|
|
|
|
|
|
|
|
|
|
This reverts commit fc3442a041a43f2df29deedc0ad96fbd6ba92385.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
