diff options
-rw-r--r-- | kernels/linux-libre-rt/Kbuild | 19 | ||||
-rw-r--r-- | kernels/linux-libre-rt/Kbuild.platforms | 6 | ||||
-rw-r--r-- | kernels/linux-libre-rt/PKGBUILD | 107 | ||||
-rw-r--r-- | kernels/linux-libre-rt/linux-libre-rt.install | 3 |
4 files changed, 121 insertions, 14 deletions
diff --git a/kernels/linux-libre-rt/Kbuild b/kernels/linux-libre-rt/Kbuild new file mode 100644 index 000000000..8a9d7dceb --- /dev/null +++ b/kernels/linux-libre-rt/Kbuild @@ -0,0 +1,19 @@ +# Fail on warnings - also for files referenced in subdirs +# -Werror can be disabled for specific files using: +# CFLAGS_<file.o> := -Wno-error +subdir-ccflags-y := -Wno-error + +# platform specific definitions +include arch/mips/Kbuild.platforms +obj-y := $(platform-y) + +# make clean traverses $(obj-) without having included .config, so +# everything ends up here +obj- := $(platform-) + +# mips object files +# The object files are linked as core-y files would be linked + +obj-y += kernel/ +obj-y += mm/ +obj-y += math-emu/ diff --git a/kernels/linux-libre-rt/Kbuild.platforms b/kernels/linux-libre-rt/Kbuild.platforms new file mode 100644 index 000000000..90a226888 --- /dev/null +++ b/kernels/linux-libre-rt/Kbuild.platforms @@ -0,0 +1,6 @@ +# All platforms listed in alphabetic order + +platforms += loongson + +# include the platform specific files +include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms)) diff --git a/kernels/linux-libre-rt/PKGBUILD b/kernels/linux-libre-rt/PKGBUILD index ebffcd37e..40746f814 100644 --- a/kernels/linux-libre-rt/PKGBUILD +++ b/kernels/linux-libre-rt/PKGBUILD @@ -17,8 +17,9 @@ _releasever=4 _rtpatchver=rt13 _pkgver=${_basekernel}.${_releasever} pkgver=${_basekernel}.${_releasever}_${_rtpatchver} +_lxopkgver=${_basekernel}.4 # nearly always the same as pkgver pkgrel=1.1 -arch=('i686' 'x86_64') +arch=('i686' 'x86_64' 'mips64el') url="http://linux-libre.fsfla.org/" license=('GPL2') makedepends=('xmlto' 'docbook-xsl') @@ -30,20 +31,31 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gn 'config.i686' 'config.x86_64' # standard config files for mkinitcpio ramdisk "${pkgname}.preset" + 'Kbuild' + 'Kbuild.platforms' 'boot-logo.patch' 'change-default-console-loglevel.patch' 'i915-fix-ghost-tv-output.patch' - '3.4.4-fix-backlight-regression.patch') + '3.4.4-fix-backlight-regression.patch' + "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.bz2") md5sums=('a5e128ca059cceb8b69148b41ff4ac6f' 'e9bb311ab329555a61696b1a18df2d34' '6d4beaa5ec54f86f91f66c77a5bcc8f4' 'd176ceb303ecfb2303d9659ea2dd91c7' 'bcb219ab37ed19912126189cfca30538' '82496e68851d1960543a07ba51cdb44a' + '2967cecc3af9f954ccc822fd63dca6ff' + '8267264d9a8966e57fdacd1fa1fc65c4' '04b21c79df0a952c22d681dd4f4562df' '9d3c56a4b999c8bfbd4018089a62f662' '263725f20c0b9eb9c353040792d644e5' - '80a46681386bb87813989faeb92bdd9a') + '80a46681386bb87813989faeb92bdd9a' + '86910efeadb5d1e5d5416ff1a9dacb33') +if [ "$CARCH" != "mips64el" ]; then + # Don't use the Loongson-specific patches on non-mips64el arches. + unset source[${#source[@]}-1] + unset md5sums[${#md5sums[@]}-1] +fi build() { cd "${srcdir}/linux-${_basekernel}" @@ -76,7 +88,27 @@ build() { # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227) patch -Np1 -i "${srcdir}/change-default-console-loglevel.patch" - cat "${srcdir}/config.${CARCH}" > ./.config # simpler + if [ "$CARCH" == "mips64el" ]; then + sed -i "s|^EXTRAVERSION.*|EXTRAVERSION =-libre-rt|" Makefile + sed -r "s|^( SUBLEVEL = ).*|\1$_sublevel|" \ + < "${srcdir}/lxo-config.patch" > lxo-config.patch + msg2 "Adding loongson-community patches" + patch -Np1 -i ${srcdir}/${_basekernel}*-*-loongson-community.patch + patch -Np0 -i lxo-config.patch + +# ensure N32, add localversion, remove uevent helper as per +# https://git.kernel.org/?p=linux/hotplug/udev.git;a=blob_plain;f=README +# and make USB storage support builtin (e.g. for booting from USB +# disks without slowly loading an initramfs) + sed -ri -e "s|CONFIG_MIPS32_N32=.*|CONFIG_MIPS32_N32=y|g" \ + -e "s|CONFIG_MIPS32_N32=.*|CONFIG_MIPS32_N32=y|g" \ + -e "s|CONFIG_UEVENT_HELPER_PATH=.*|CONFIG_UEVENT_HELPER_PATH=\"\"|g" \ + -e "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" \ + -e "s;(CONFIG_USB(_COMMON|_EHCI_HCD|_OHCI_HCD|_STORAGE.*|_UAS)?)=.*;\1=y;g" \ + ./.config + else + cat "${srcdir}/config.${CARCH}" > ./.config # simpler + fi if [ "${_kernelname}" != "" ]; then sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config @@ -109,29 +141,51 @@ build() { yes "" | make config # build! - make ${MAKEFLAGS} bzImage modules + if [ "$CARCH" == "mips64el" ]; then + # The build system passes it directly to linker, disable to avoid + # having unknown -Wl,... options. + export LDFLAGS="" + # bzImage is arch-specific and not supported on mips; vmlinux is + # useful for oprofile. + make ${MAKEFLAGS} vmlinux vmlinuz modules + else + make ${MAKEFLAGS} bzImage modules + fi } package_linux-libre-rt() { pkgdesc="The Linux-libre Kernel and modules (with realtime preemption)" - depends=('coreutils' 'module-init-tools>=3.16' 'mkinitcpio>=0.7') + depends=('coreutils' 'kmod') optdepends=('crda: to set the correct wireless channels of your country') provides=('kernel26-rt' "linux-rt=$_pkgver") conflicts=('kernel26-rt' 'kernel26-libre-rt' 'linux-rt') replaces=('kernel26-rt' 'kernel26-libre-rt' 'linux-rt') backup=("etc/mkinitcpio.d/${pkgname}.preset") install=${pkgname}.install + if [ "$CARCH" = "mips64el" ]; then + optdepends+=('mkinitcpio: to make the initramfs (needs reinstall of this package)') + conflicts+=('mkinitcpio<0.7') + else + depends+=('mkinitcpio>=0.7') + fi cd "${srcdir}/linux-${_basekernel}" KARCH=x86 + [ $CARCH = "mips64el" ] && KARCH=mips # get kernel version _kernver="$(make kernelrelease)" mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot} make INSTALL_MOD_PATH="${pkgdir}" modules_install - cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgname}" + + if [ "$CARCH" == "mips64el" ]; then + cp vmlinuz "${pkgdir}/boot/vmlinuz-${pkgname}" + cp vmlinux "${pkgdir}/boot/vmlinux-${pkgname}" + else + cp "arch/${KARCH}/boot/bzImage" "${pkgdir}/boot/vmlinuz-${pkgname}" + fi # add vmlinux install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux" @@ -146,6 +200,12 @@ package_linux-libre-rt() { -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgname}-fallback.img\"|g" \ -i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset" +# mkinitcpio 0.7 relies on bzImage to find the kernel version + if [ "$CARCH" == "mips64el" ]; then + sed -e "s|ALL_kver=.*|ALL_kver=\"${_kernver}\"|g" \ + -i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset" + fi + # remove build and source links rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build} # remove the firmware @@ -153,10 +213,10 @@ package_linux-libre-rt() { # gzip -9 all modules to save 100MB of space find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \; # make room for external modules - ln -s "../extramodules-${_basekernel}${_kernelname:--LIBRE}" "${pkgdir}/lib/modules/${_kernver}/extramodules" + ln -s "../extramodules-${_basekernel}${_kernelname:--LIBRE-RT}" "${pkgdir}/lib/modules/${_kernver}/extramodules" # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--LIBRE}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--LIBRE}/version" + mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--LIBRE-RT}" + echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--LIBRE-RT}/version" # move module tree /lib -> /usr/lib mv "$pkgdir/lib" "$pkgdir/usr" @@ -171,6 +231,15 @@ package_linux-libre-rt-headers() { conflicts=('kernel26-rt-headers' 'kernel26-libre-rt-headers' 'linux-rt-headers') replaces=('kernel26-rt-headers' 'kernel26-libre-rt-headers' 'linux-rt-headers') + KARCH=x86 + [ $CARCH = "mips64el" ] && KARCH=mips + +# In case of repackaging this is empty + if [ -z "${_kernver}" ]; then + cd "${srcdir}/linux-${_basekernel}" + _kernver="$(make kernelrelease)" + fi + install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}" cd "${pkgdir}/usr/lib/modules/${_kernver}" @@ -192,13 +261,19 @@ package_linux-libre-rt-headers() { done # copy arch includes for external modules - mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86" - cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/" + mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}" + cp -a "arch/${KARCH}/include" "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/" # copy files necessary for later builds cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}" cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}" + if [ "$CARCH" = "mips64el" ]; then + cp "arch/${KARCH}/Kbuild" "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/" + cp -a "arch/${KARCH}/loongson" "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/" + cp "${srcdir}/Kbuild.platforms" "${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/" + fi + # fix permissions on scripts dir chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts" mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions" @@ -293,6 +368,10 @@ package_linux-libre-rt-headers() { done # remove unneeded architectures - rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa} + rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa} + if [ "$CARCH" = "mips64el" ]; then + rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/x86 + else + rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/mips + fi } - diff --git a/kernels/linux-libre-rt/linux-libre-rt.install b/kernels/linux-libre-rt/linux-libre-rt.install index e316a354c..7d448d7c6 100644 --- a/kernels/linux-libre-rt/linux-libre-rt.install +++ b/kernels/linux-libre-rt/linux-libre-rt.install @@ -4,6 +4,9 @@ KERNEL_NAME=-rt KERNEL_VERSION=3.4.4-1.1-rt13-LIBRE-RT +# set a sane PATH to ensure that critical utils like depmod will be found +export PATH='/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin' + post_install () { # updating module dependencies echo ">>> Updating module dependencies. Please wait ..." |