diff options
Diffstat (limited to 'libre-testing')
7 files changed, 947 insertions, 0 deletions
diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch new file mode 100644 index 000000000..d2bf83216 --- /dev/null +++ b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch @@ -0,0 +1,40 @@ +diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h +--- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 ++++ u-boot-2015.01/include/configs/udoo.h 2016-02-24 00:50:18.771357005 -0300 +@@ -98,9 +98,14 @@ + #define CONFIG_CMD_FAT + #define CONFIG_DOS_PARTITION + +-#define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" ++/* Enable extlinux boot support */ ++#define CONFIG_CMD_PXE ++#define CONFIG_MENU ++#define BOOT_TARGET_DEVICES(func) ++#include <config_distro_bootcmd.h> + + #define CONFIG_EXTRA_ENV_SETTINGS \ ++ BOOTENV \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc1\0" \ +@@ -111,9 +116,11 @@ + "fdt_addr=0x18000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ ++ "devtype=mmc\0" \ ++ "devnum=0\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ +- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ ++ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ +@@ -178,6 +185,7 @@ + + #define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ ++ "run scan_dev_for_boot;" \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 new file mode 100644 index 000000000..d2bf83216 --- /dev/null +++ b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 @@ -0,0 +1,40 @@ +diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h +--- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 ++++ u-boot-2015.01/include/configs/udoo.h 2016-02-24 00:50:18.771357005 -0300 +@@ -98,9 +98,14 @@ + #define CONFIG_CMD_FAT + #define CONFIG_DOS_PARTITION + +-#define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" ++/* Enable extlinux boot support */ ++#define CONFIG_CMD_PXE ++#define CONFIG_MENU ++#define BOOT_TARGET_DEVICES(func) ++#include <config_distro_bootcmd.h> + + #define CONFIG_EXTRA_ENV_SETTINGS \ ++ BOOTENV \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc1\0" \ +@@ -111,9 +116,11 @@ + "fdt_addr=0x18000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ ++ "devtype=mmc\0" \ ++ "devnum=0\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ +- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ ++ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ +@@ -178,6 +185,7 @@ + + #define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ ++ "run scan_dev_for_boot;" \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing2 b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing2 new file mode 100644 index 000000000..dbb449c7c --- /dev/null +++ b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing2 @@ -0,0 +1,628 @@ +diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg +--- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 ++++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-23 18:15:32.854611743 -0300 +@@ -0,0 +1,58 @@ ++/* ++ * Copyright (C) 2013 Seco USA Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++ ++DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D ++DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 ++ ++DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 ++DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 ++DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB ++ ++DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 ++DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 ++DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 ++ ++ ++DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 ++DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 ++DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 ++ ++DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 ++DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 ++DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 ++DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 ++DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 ++ ++DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 ++DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 ++ ++DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 ++ ++DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 ++DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 ++ ++DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 ++DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E ++DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E ++DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 ++ ++DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 ++DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 ++DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 ++DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 ++ ++DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 ++DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F ++DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F ++DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F ++ ++DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 ++DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 ++ ++DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D ++DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 ++DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg +--- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 ++++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-23 18:15:32.854611743 -0300 +@@ -0,0 +1,84 @@ ++/* ++ * Copyright (C) 2013 Seco USA Inc ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ * ++ * Device Configuration Data (DCD) ++ * ++ * Each entry must have the format: ++ * Addr-type Address Value ++ * ++ * where: ++ * Addr-type register length (1,2 or 4 bytes) ++ * Address absolute address of the register ++ * value value to be stored in the register ++ */ ++ ++/* ++ * DDR3 settings ++ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), ++ * memory bus width: 64 bits x16/x32/x64 ++ * MX6DL ddr is limited to 800 MHz(400 MHz clock) ++ * memory bus width: 64 bits x16/x32/x64 ++ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) ++ * memory bus width: 32 bits x16/x32 ++ */ ++DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 ++ ++DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 ++DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 ++ ++DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 ++ ++DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 ++DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 ++ ++DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 ++DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 ++ ++DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 ++ ++DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 ++DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 ++ ++/* (differential input) */ ++DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 ++/* (differential input) */ ++DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 ++/* disable ddr pullups */ ++DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 ++DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 ++/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ ++DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 ++ ++/* Read data DQ Byte0-3 delay */ ++DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 ++DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 ++DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 ++DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 ++DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 ++DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 ++DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 ++DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 +diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg +--- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 ++++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-23 18:15:32.854611743 -0300 +@@ -0,0 +1,29 @@ ++/* ++ * Copyright (C) 2013 Boundary Devices ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ * ++ * Refer doc/README.imximage for more details about how-to configure ++ * and create imximage boot image ++ * ++ * The syntax is taken as close as possible with the kwbimage ++ */ ++ ++/* image version */ ++IMAGE_VERSION 2 ++ ++/* ++ * Boot Device : one of ++ * spi, sd (the board has no nand neither onenand) ++ */ ++BOOT_FROM sd ++ ++#define __ASSEMBLY__ ++#include <config.h> ++#include "asm/arch/mx6-ddr.h" ++#include "asm/arch/iomux.h" ++#include "asm/arch/crm_regs.h" ++ ++#include "ddr-setup_dl.cfg" ++#include "1066mhz_4x256mx16_dl.cfg" ++#include "clocks.cfg" +diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig +--- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 ++++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-23 18:15:32.854611743 -0300 +@@ -0,0 +1,3 @@ ++CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" ++CONFIG_ARM=y ++CONFIG_TARGET_UDOO=y +diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h +--- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 ++++ u-boot-2015.01/include/configs/udoo.h 2016-02-23 18:24:17.779054304 -0300 +@@ -78,7 +78,7 @@ + #define CONFIG_CMD_BMODE + #define CONFIG_CMD_SETEXPR + +-#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTDELAY 1 + + #define CONFIG_SYS_MEMTEST_START 0x10000000 + #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) +@@ -96,60 +96,107 @@ + #define CONFIG_BOUNCE_BUFFER + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT ++#define CONFIG_CMD_EXT4 ++#define CONFIG_CMD_FS_GENERIC + #define CONFIG_DOS_PARTITION + ++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre ARM" ++ ++#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) ++#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" ++#elif defined(CONFIG_MX6Q) + #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" ++#endif ++ ++/* Enable extlinux boot support */ ++#define CONFIG_CMD_PXE ++#define CONFIG_MENU ++#define BOOT_TARGET_DEVICES(func) ++#include <config_distro_bootcmd.h> + + #define CONFIG_EXTRA_ENV_SETTINGS \ +- "script=boot.scr\0" \ +- "image=zImage\0" \ +- "console=ttymxc1\0" \ ++ BOOTENV \ ++ "bootfile=zImage\0" \ ++ "bootdir=/boot\0" \ ++ "console=ttymxc1,115200\0" \ + "splashpos=m,m\0" \ + "fdt_high=0xffffffff\0" \ ++ "rdaddr=0x12A00000\0" \ ++ "rdfile=initramfs-linux.img\0" \ + "initrd_high=0xffffffff\0" \ +- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ +- "fdt_addr=0x18000000\0" \ +- "boot_fdt=try\0" \ ++ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ ++ "fdtdir=/boot/dtbs\0" \ ++ "fdtaddr=0x18000000\0" \ + "ip_dyn=yes\0" \ ++ "optargs=\0" \ ++ "video=\0" \ ++ "devtype=mmc\0" \ ++ "devnum=0\0" \ + "mmcdev=0\0" \ +- "mmcpart=1\0" \ +- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ +- "update_sd_firmware_filename=u-boot.imx\0" \ +- "update_sd_firmware=" \ +- "if test ${ip_dyn} = yes; then " \ +- "setenv get_cmd dhcp; " \ ++ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ ++ "mmcargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${mmcroot} " \ ++ "video=${video}\0" \ ++ "videoargs=" \ ++ "setenv nextcon 0; " \ ++ "if hdmidet; then " \ ++ "setenv bootargs ${bootargs} " \ ++ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ ++ "if=RGB24; " \ ++ "setenv fbmem fbmem=28M; " \ ++ "setexpr nextcon ${nextcon} + 1; " \ + "else " \ +- "setenv get_cmd tftp; " \ ++ "echo - no HDMI monitor;" \ + "fi; " \ +- "if mmc dev ${mmcdev}; then " \ +- "if ${get_cmd} ${update_sd_firmware_filename}; then " \ +- "setexpr fw_sz ${filesize} / 0x200; " \ +- "setexpr fw_sz ${fw_sz} + 1; " \ +- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ +- "fi; " \ +- "fi\0" \ +- "mmcargs=setenv bootargs console=${console},${baudrate} " \ +- "root=${mmcroot}\0" \ +- "loadbootscript=" \ +- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +- "bootscript=echo Running bootscript from mmc ...; " \ +- "source\0" \ +- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ +- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ +- "mmcboot=echo Booting from mmc ...; " \ +- "run mmcargs; " \ +- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +- "if run loadfdt; then " \ +- "bootz ${loadaddr} - ${fdt_addr}; " \ ++ "i2c dev 1; " \ ++ "if i2c probe 0x10; then " \ ++ "setenv bootargs ${bootargs} " \ ++ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ ++ "if=RGB666; " \ ++ "if test 0 -eq ${nextcon}; then " \ ++ "setenv fbmem fbmem=10M; " \ + "else " \ +- "if test ${boot_fdt} = try; then " \ +- "bootz; " \ +- "else " \ +- "echo WARN: Cannot load the DT; " \ +- "fi; " \ ++ "setenv fbmem ${fbmem},10M; " \ + "fi; " \ ++ "setexpr nextcon ${nextcon} + 1; " \ + "else " \ +- "bootz; " \ ++ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ ++ "fi; " \ ++ "setenv bootargs ${bootargs} ${fbmem}\0" \ ++ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ ++ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ ++ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ ++ "mmcboot=mmc dev ${mmcdev}; " \ ++ "if mmc rescan; then " \ ++ "echo SD/MMC found on device ${mmcdev};" \ ++ "setenv bootpart ${mmcdev}:1; " \ ++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ ++ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \ ++ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ ++ "env import -t ${loadaddr} ${filesize};" \ ++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ ++ "echo Checking if uenvcmd is set ...;" \ ++ "if test -n ${uenvcmd}; then " \ ++ "echo Running uenvcmd ...;" \ ++ "run uenvcmd;" \ ++ "fi;" \ ++ "fi; " \ ++ "run scan_dev_for_boot;" \ ++ "if run loadimage; then " \ ++ "if run loadfdt; then " \ ++ "run mmcargs;" \ ++ "if run loadrd; then " \ ++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ ++ "else " \ ++ "bootz ${loadaddr} - ${fdtaddr};" \ ++ "fi;" \ ++ "else " \ ++ "echo Kernel found, but no device tree found;" \ ++ "fi;" \ ++ "else " \ ++ "echo No kernel found;" \ ++ "fi;" \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ +@@ -161,10 +208,10 @@ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ +- "${get_cmd} ${image}; " \ ++ "${get_cmd} ${bootfile}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ +- "bootz ${loadaddr} - ${fdt_addr}; " \ ++ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \ ++ "bootz ${loadaddr} - ${fdtaddr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ +@@ -177,16 +224,7 @@ + "fi;\0" + + #define CONFIG_BOOTCOMMAND \ +- "mmc dev ${mmcdev}; if mmc rescan; then " \ +- "if run loadbootscript; then " \ +- "run bootscript; " \ +- "else " \ +- "if run loadimage; then " \ +- "run mmcboot; " \ +- "else run netboot; " \ +- "fi; " \ +- "fi; " \ +- "else run netboot; fi" ++ "run mmcboot;" + + /* Miscellaneous configurable options */ + #define CONFIG_SYS_LONGHELP +@@ -227,6 +265,7 @@ + + #define CONFIG_OF_LIBFDT + #define CONFIG_CMD_BOOTZ ++#define CONFIG_SUPPORT_RAW_INITRD + + #ifndef CONFIG_SYS_DCACHE_OFF + #define CONFIG_CMD_CACHE +diff -Nur u-boot-2015.01.orig/include/configs/udoo.h.orig u-boot-2015.01/include/configs/udoo.h.orig +--- u-boot-2015.01.orig/include/configs/udoo.h.orig 1969-12-31 21:00:00.000000000 -0300 ++++ u-boot-2015.01/include/configs/udoo.h.orig 2015-01-12 12:39:08.000000000 -0200 +@@ -0,0 +1,235 @@ ++/* ++ * Copyright (C) 2013 Freescale Semiconductor, Inc. ++ * ++ * Configuration settings for Udoo board. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#include "mx6_common.h" ++#include <asm/arch/imx-regs.h> ++#include <asm/imx-common/gpio.h> ++#include <linux/sizes.h> ++ ++#define CONFIG_MX6 ++#define CONFIG_DISPLAY_CPUINFO ++#define CONFIG_DISPLAY_BOARDINFO ++ ++#define MACH_TYPE_UDOO 4800 ++#define CONFIG_MACH_TYPE MACH_TYPE_UDOO ++ ++#define CONFIG_CMDLINE_TAG ++#define CONFIG_SETUP_MEMORY_TAGS ++#define CONFIG_INITRD_TAG ++#define CONFIG_REVISION_TAG ++ ++#define CONFIG_SYS_GENERIC_BOARD ++ ++/* Size of malloc() pool */ ++#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M) ++ ++#define CONFIG_BOARD_EARLY_INIT_F ++#define CONFIG_MXC_GPIO ++ ++#define CONFIG_MXC_UART ++#define CONFIG_MXC_UART_BASE UART2_BASE ++ ++/* SATA Configs */ ++ ++#define CONFIG_CMD_SATA ++#ifdef CONFIG_CMD_SATA ++#define CONFIG_DWC_AHSATA ++#define CONFIG_SYS_SATA_MAX_DEVICE 1 ++#define CONFIG_DWC_AHSATA_PORT_ID 0 ++#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR ++#define CONFIG_LBA48 ++#define CONFIG_LIBATA ++#endif ++ ++/* Network support */ ++ ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NET ++#define CONFIG_FEC_MXC ++#define CONFIG_MII ++#define IMX_FEC_BASE ENET_BASE_ADDR ++#define CONFIG_FEC_XCV_TYPE RGMII ++#define CONFIG_ETHPRIME "FEC" ++#define CONFIG_FEC_MXC_PHYADDR 6 ++#define CONFIG_PHYLIB ++#define CONFIG_PHY_MICREL ++#define CONFIG_PHY_MICREL_KSZ9031 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_CONS_INDEX 1 ++#define CONFIG_BAUDRATE 115200 ++ ++/* Command definition */ ++#include <config_cmd_default.h> ++ ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_BMODE ++#define CONFIG_CMD_SETEXPR ++ ++#define CONFIG_BOOTDELAY 3 ++ ++#define CONFIG_SYS_MEMTEST_START 0x10000000 ++#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) ++#define CONFIG_LOADADDR 0x12000000 ++#define CONFIG_SYS_TEXT_BASE 0x17800000 ++ ++/* MMC Configuration */ ++#define CONFIG_FSL_ESDHC ++#define CONFIG_FSL_USDHC ++#define CONFIG_SYS_FSL_ESDHC_ADDR 0 ++ ++#define CONFIG_MMC ++#define CONFIG_CMD_MMC ++#define CONFIG_GENERIC_MMC ++#define CONFIG_BOUNCE_BUFFER ++#define CONFIG_CMD_EXT2 ++#define CONFIG_CMD_FAT ++#define CONFIG_DOS_PARTITION ++ ++#define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "script=boot.scr\0" \ ++ "image=zImage\0" \ ++ "console=ttymxc1\0" \ ++ "splashpos=m,m\0" \ ++ "fdt_high=0xffffffff\0" \ ++ "initrd_high=0xffffffff\0" \ ++ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ ++ "fdt_addr=0x18000000\0" \ ++ "boot_fdt=try\0" \ ++ "ip_dyn=yes\0" \ ++ "mmcdev=0\0" \ ++ "mmcpart=1\0" \ ++ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ ++ "update_sd_firmware_filename=u-boot.imx\0" \ ++ "update_sd_firmware=" \ ++ "if test ${ip_dyn} = yes; then " \ ++ "setenv get_cmd dhcp; " \ ++ "else " \ ++ "setenv get_cmd tftp; " \ ++ "fi; " \ ++ "if mmc dev ${mmcdev}; then " \ ++ "if ${get_cmd} ${update_sd_firmware_filename}; then " \ ++ "setexpr fw_sz ${filesize} / 0x200; " \ ++ "setexpr fw_sz ${fw_sz} + 1; " \ ++ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ ++ "fi; " \ ++ "fi\0" \ ++ "mmcargs=setenv bootargs console=${console},${baudrate} " \ ++ "root=${mmcroot}\0" \ ++ "loadbootscript=" \ ++ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ ++ "bootscript=echo Running bootscript from mmc ...; " \ ++ "source\0" \ ++ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ ++ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ ++ "mmcboot=echo Booting from mmc ...; " \ ++ "run mmcargs; " \ ++ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++ "if run loadfdt; then " \ ++ "bootz ${loadaddr} - ${fdt_addr}; " \ ++ "else " \ ++ "if test ${boot_fdt} = try; then " \ ++ "bootz; " \ ++ "else " \ ++ "echo WARN: Cannot load the DT; " \ ++ "fi; " \ ++ "fi; " \ ++ "else " \ ++ "bootz; " \ ++ "fi;\0" \ ++ "netargs=setenv bootargs console=${console},${baudrate} " \ ++ "root=/dev/nfs " \ ++ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ ++ "netboot=echo Booting from net ...; " \ ++ "run netargs; " \ ++ "if test ${ip_dyn} = yes; then " \ ++ "setenv get_cmd dhcp; " \ ++ "else " \ ++ "setenv get_cmd tftp; " \ ++ "fi; " \ ++ "${get_cmd} ${image}; " \ ++ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ ++ "bootz ${loadaddr} - ${fdt_addr}; " \ ++ "else " \ ++ "if test ${boot_fdt} = try; then " \ ++ "bootz; " \ ++ "else " \ ++ "echo WARN: Cannot load the DT; " \ ++ "fi; " \ ++ "fi; " \ ++ "else " \ ++ "bootz; " \ ++ "fi;\0" ++ ++#define CONFIG_BOOTCOMMAND \ ++ "mmc dev ${mmcdev}; if mmc rescan; then " \ ++ "if run loadbootscript; then " \ ++ "run bootscript; " \ ++ "else " \ ++ "if run loadimage; then " \ ++ "run mmcboot; " \ ++ "else run netboot; " \ ++ "fi; " \ ++ "fi; " \ ++ "else run netboot; fi" ++ ++/* Miscellaneous configurable options */ ++#define CONFIG_SYS_LONGHELP ++#define CONFIG_SYS_HUSH_PARSER ++#define CONFIG_AUTO_COMPLETE ++#define CONFIG_SYS_CBSIZE 256 ++ ++/* Print Buffer Size */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) ++#define CONFIG_SYS_MAXARGS 16 ++#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE ++ ++#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR ++ ++#define CONFIG_CMDLINE_EDITING ++ ++/* Physical Memory Map */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR ++ ++#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM ++#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR ++#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE ++ ++#define CONFIG_SYS_INIT_SP_OFFSET \ ++ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) ++#define CONFIG_SYS_INIT_SP_ADDR \ ++ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) ++ ++/* FLASH and environment organization */ ++#define CONFIG_SYS_NO_FLASH ++ ++#define CONFIG_ENV_SIZE (8 * 1024) ++ ++#define CONFIG_ENV_IS_IN_MMC ++#define CONFIG_ENV_OFFSET (6 * 64 * 1024) ++#define CONFIG_SYS_MMC_ENV_DEV 0 ++ ++#define CONFIG_OF_LIBFDT ++#define CONFIG_CMD_BOOTZ ++ ++#ifndef CONFIG_SYS_DCACHE_OFF ++#define CONFIG_CMD_CACHE ++#endif ++ ++#endif /* __CONFIG_H * */ diff --git a/libre-testing/uboot-udoo/0002-kernel-add-support-for-gcc-5.patch b/libre-testing/uboot-udoo/0002-kernel-add-support-for-gcc-5.patch new file mode 100644 index 000000000..30718c561 --- /dev/null +++ b/libre-testing/uboot-udoo/0002-kernel-add-support-for-gcc-5.patch @@ -0,0 +1,97 @@ +From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001 +From: Sasha Levin <sasha.levin@oracle.com> +Date: Mon, 13 Oct 2014 15:51:05 -0700 +Subject: [PATCH 2/6] kernel: add support for gcc 5 + +We're missing include/linux/compiler-gcc5.h which is required now +because gcc branched off to v5 in trunk. + +Just copy the relevant bits out of include/linux/compiler-gcc4.h, +no new code is added as of now. + +This fixes a build error when using gcc 5. + +Signed-off-by: Sasha Levin <sasha.levin@oracle.com> +Cc: <stable@vger.kernel.org> +Signed-off-by: Andrew Morton <akpm@linux-foundation.org> +Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> +--- + include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 66 insertions(+) + create mode 100644 include/linux/compiler-gcc5.h + +diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h +new file mode 100644 +index 0000000..cdd1cc2 +--- /dev/null ++++ b/include/linux/compiler-gcc5.h +@@ -0,0 +1,66 @@ ++#ifndef __LINUX_COMPILER_H ++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." ++#endif ++ ++#define __used __attribute__((__used__)) ++#define __must_check __attribute__((warn_unused_result)) ++#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) ++ ++/* Mark functions as cold. gcc will assume any path leading to a call ++ to them will be unlikely. This means a lot of manual unlikely()s ++ are unnecessary now for any paths leading to the usual suspects ++ like BUG(), printk(), panic() etc. [but let's keep them for now for ++ older compilers] ++ ++ Early snapshots of gcc 4.3 don't support this and we can't detect this ++ in the preprocessor, but we can live with this because they're unreleased. ++ Maketime probing would be overkill here. ++ ++ gcc also has a __attribute__((__hot__)) to move hot functions into ++ a special section, but I don't see any sense in this right now in ++ the kernel context */ ++#define __cold __attribute__((__cold__)) ++ ++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) ++ ++#ifndef __CHECKER__ ++# define __compiletime_warning(message) __attribute__((warning(message))) ++# define __compiletime_error(message) __attribute__((error(message))) ++#endif /* __CHECKER__ */ ++ ++/* ++ * Mark a position in code as unreachable. This can be used to ++ * suppress control flow warnings after asm blocks that transfer ++ * control elsewhere. ++ * ++ * Early snapshots of gcc 4.5 don't support this and we can't detect ++ * this in the preprocessor, but we can live with this because they're ++ * unreleased. Really, we need to have autoconf for the kernel. ++ */ ++#define unreachable() __builtin_unreachable() ++ ++/* Mark a function definition as prohibited from being cloned. */ ++#define __noclone __attribute__((__noclone__)) ++ ++/* ++ * Tell the optimizer that something else uses this function or variable. ++ */ ++#define __visible __attribute__((externally_visible)) ++ ++/* ++ * GCC 'asm goto' miscompiles certain code sequences: ++ * ++ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 ++ * ++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. ++ * Fixed in GCC 4.8.2 and later versions. ++ * ++ * (asm goto is automatically volatile - the naming reflects this.) ++ */ ++#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) ++ ++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP ++#define __HAVE_BUILTIN_BSWAP32__ ++#define __HAVE_BUILTIN_BSWAP64__ ++#define __HAVE_BUILTIN_BSWAP16__ ++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ +-- +2.4.4 + diff --git a/libre-testing/uboot-udoo/PKGBUILD b/libre-testing/uboot-udoo/PKGBUILD new file mode 100644 index 000000000..ab13ee499 --- /dev/null +++ b/libre-testing/uboot-udoo/PKGBUILD @@ -0,0 +1,68 @@ +# U-Boot: UDOO +# Maintainer: André Silva <emulatorman@parabola.nu> + +buildarch=4 + +pkgbase=uboot-udoo +pkgname=('uboot-udoo_dl' 'uboot-udoo_quad') +pkgver=2015.01 +pkgrel=1 +arch=('armv7h') +url="http://git.denx.de/u-boot.git/" +license=('GPL') +makedepends=('bc') +backup=(boot/extlinux/extlinux.conf) +source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" + '0001-parabola-arm-modifications.patch' + '0002-kernel-add-support-for-gcc-5.patch' + 'extlinux.conf') +md5sums=('7f08dc9e98a71652bd6968888ed6ec95' + 'dfceac5db9aa48ae2d5accf1d151c311' + '721a46867e189d8dedc6b6f86a536a34' + 'e05d2d41a1bdbbd5d6fec02534784dcd') + +prepare() { + cd u-boot-${pkgver} + + patch -Np1 -i ../0001-parabola-arm-modifications.patch + patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch +} + +build() { + cd u-boot-${pkgver} + + unset CFLAGS CXXFLAGS LDFLAGS + + mkdir bins + for i in dl quad; do + make distclean + make udoo_${i}_config + make + mv u-boot.imx bins/u-boot-${i}.imx + done +} + +package_uboot-udoo_dl() { + pkgdesc="U-Boot for UDOO Dual" + replaces=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec' + 'uboot-udoo-dual') + conflicts=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec' + 'uboot-udoo-dual' 'uboot-udoo_quad' 'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad') + install=${pkgbase}.install + + mkdir -p "${pkgdir}"/boot/extlinux + cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx + cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux +} + +package_uboot-udoo_quad() { + pkgdesc="U-Boot for UDOO Quad" + replaces=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec') + conflicts=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec' + 'uboot-udoo_dual' 'uboot4grub-udoo_quad' 'uboot4grub-udoo_dl') + install=${pkgbase}.install + + mkdir -p "${pkgdir}"/boot/extlinux + cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx + cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux +} diff --git a/libre-testing/uboot-udoo/extlinux.conf b/libre-testing/uboot-udoo/extlinux.conf new file mode 100644 index 000000000..45d603094 --- /dev/null +++ b/libre-testing/uboot-udoo/extlinux.conf @@ -0,0 +1,46 @@ +menu title Welcome to U-Boot with Extlinux support! + +label Parabola GNU/Linux-libre, linux-libre kernel + kernel /boot/vmlinuz-linux-libre + append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 + fdtdir /boot/dtbs/linux-libre + +#label Parabola GNU/Linux-libre, linux-libre-lts kernel +# kernel /boot/vmlinuz-linux-libre-lts +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-lts + +#label Parabola GNU/Linux-libre, linux-libre-knock kernel +# kernel /boot/vmlinuz-linux-libre-knock +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-knock + +#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel +# kernel /boot/vmlinuz-linux-libre-lts-knock +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-lts-knock + +#label Parabola GNU/Linux-libre, linux-libre-grsec kernel +# kernel /boot/vmlinuz-linux-libre-grsec +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-grsec + +#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel +# kernel /boot/vmlinuz-linux-libre-grsec-knock +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-grsec-knock + +#label Parabola GNU/Linux-libre, linux-libre-audit kernel +# kernel /boot/vmlinuz-linux-libre-audit +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-audit + +#label Parabola GNU/Linux-libre, linux-libre-pck kernel +# kernel /boot/vmlinuz-linux-libre-pck +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-pck + +#label Parabola GNU/Linux-libre, linux-libre-rt kernel +# kernel /boot/vmlinuz-linux-libre-rt +# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 +# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre-testing/uboot-udoo/uboot-udoo.install b/libre-testing/uboot-udoo/uboot-udoo.install new file mode 100644 index 000000000..9f535bae7 --- /dev/null +++ b/libre-testing/uboot-udoo/uboot-udoo.install @@ -0,0 +1,28 @@ +extlinux_warning() { + echo ">>> WARNING: for new entries, edit /boot/extlinux/extlinux.conf" +} + +flash_uboot() { + echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." + echo "Do you want to do this now? [y|N]" + read -r shouldwe + if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then + dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2 + sync + else + echo "You can do this later by running:" + echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2" + fi + extlinux_warning +} + +## arg 1: the new package version +post_install() { + flash_uboot +} + +## arg 1: the new package version +## arg 2: the old package version +post_upgrade() { + flash_uboot +} |