diff options
Diffstat (limited to 'libre/syslinux-parabola/syslinux-install_update')
| -rw-r--r-- | libre/syslinux-parabola/syslinux-install_update | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/libre/syslinux-parabola/syslinux-install_update b/libre/syslinux-parabola/syslinux-install_update new file mode 100644 index 000000000..3843b5fed --- /dev/null +++ b/libre/syslinux-parabola/syslinux-install_update @@ -0,0 +1,453 @@ +#!/usr/bin/env bash +# +# Syslinux Installer / Updater Script (for BIOS only) +# Copyright (C) 2011-2013 Matthew Gyurgyik <pyther@pyther.net> +# Copyright (C) 2013 Keshav Padram Amburay <(the) (ddoott) (ridikulus) (ddoott) (rat) (aatt) (gemmaeiil) (ddoott) (ccoomm)> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +#----------------- +# ChangeLog: +# 2013-10-23 : Keshav Padram Amburay : Updated script to work with Syslinux 6.02 Arch Linux pkg +#----------------- +# Exit Codes: +# 1 - get_boot_device or other function failed +# 2 - install/update failed +# 3 - set_active failed +# 4 - install_mbr failed +#----------------- + +shopt -s nullglob + +bios_libpath="/usr/lib/syslinux/bios" +bios_bootpath="/boot/syslinux" +EXTLINUX="/usr/bin/extlinux" + +bios_autoupdate_file="/boot/syslinux/SYSLINUX_AUTOUPDATE" +pciids_file="/usr/share/hwdata/pci.ids" + +## Helper functions ## +# Taken from libui-sh +# $1 needle +# $2 set (array) haystack +check_is_in() { + local needle="$1" element + shift + for element; do + [[ $element = $needle ]] && return 0 + done + return 1 +} + +# return true when blockdevice is an md raid, otherwise return a unset value +# get all devices that are part of raid device $1 +device_is_raid() { + [[ $1 && -f /proc/mdstat ]] || return 1 + local devmajor=$(stat -c %t "$1") + (( devmajor == 9 )) +} + +mdraid_all_slaves() { + local slave slaves + for slave in /sys/class/block/${1##*/}/slaves/*; do + source "$slave/uevent" + slaves="$slaves/dev/$DEVNAME " + unset DEVNAME + done + echo $slaves +} + +# Check /sys/block to see if device is partitioned +# If we have a partitioned block device (sda1) /sys/block/sda1/dev will not exist +# However, if we have an unpartitioned block device (sda) /sys/block/sda/dev will exist +dev_is_part() { + # $1 - blockdevice + local dev=$1 + + # If block device uevent file should be found + # If a partition is passed in path shouldn't exist + if [[ $dev = *cciss* ]]; then + [[ -f /sys/block/cciss\!${dev##*/}/dev ]] && return 1 + elif [[ $dev = *ida* ]]; then + [[ -f /sys/block/ida\!${dev##*/}/dev ]] && return 1 + else + [[ -f /sys/block/${dev##*/}/dev ]] && return 1 + fi + + return 0 +} + +# If EFI PART is present in the first 8 bytes then it must be a GPT disk +device_is_gpt() { + local partsig=$(dd if="$1" skip=64 bs=8 count=1 2>/dev/null) + [[ $partsig = "EFI PART" ]] +} + +clear_gpt_attr2() { + # $1 - Block Device, no partitions + local disk=$1 + + # Special Exception for cciss controllers + if [[ $disk = *cciss* ]]; then + for part in /dev/cciss/${disk##*/}*p*; do + local partnum="${part##*[[:alpha:]]}" + sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null + done + # Smart 2 Controllers + elif [[ $disk = *ida* ]]; then + for part in /dev/ida/${disk##*/}*p*; do + local partnum="${part##*[[:alpha:]]}" + sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null + done + else + for part in /sys/block/${disk##*/}/${disk##*/}*; do + local partnum="${part##*[[:alpha:]]}" + sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null + done + fi + return 0 +} + +usage() { +cat << EOF +usage: $0 options + +This script will install or upgrade Syslinux (for BIOS only) + +OPTIONS: + -h Show this message + -i Install Syslinux + -u Update Syslinux + -a Set Boot flag on boot partiton + -m Install Syslinux MBR + -s Updates Syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists + + Arguments Required: + -c Chroot install (ex: -c /mnt) + +Example Usage: $0 -i -a -m # (install, set boot flag, install mbr) + $0 -u # (update) +EOF +} + +# Trys to find the partition that /boot resides on +# This will either be on /boot or / (root) +getBoot() { + if [[ ! -d "$bios_bootpath" ]]; then + echo "Could not find $bios_bootpath" + echo "Is boot mounted? Is Syslinux installed?" + exit 1 + fi + + syslinux_fs=(ext2 ext3 ext4 btrfs vfat) + + # Use DATA from findmnt see rc.sysint for more info + if [[ -f /proc/self/mountinfo ]]; then + read rootdev rootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/") + read bootdev bootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/boot") + else + echo "Could not find /proc/self/mountinfo" + echo "Are you running a kernel greater than 2.6.24?" + exit 1 + fi + + if [[ $bootfs ]]; then + if ! check_is_in "$bootfs" "${syslinux_fs[@]}"; then + echo "/boot file system is not supported by Syslinux" + exit 1 + fi + boot="boot" + bootpart="$bootdev" + elif [[ $rootfs ]]; then + if ! check_is_in "$rootfs" "${syslinux_fs[@]}"; then + echo "/ (root) file system is not supported by Syslinux" + exit 1 + fi + boot="root" + bootpart="$rootdev" + else + echo "Could not find filesystem on / (root) or /boot." + exit 1 + fi +} + +# We store the partition table type either gpt or mbr in var ptb +# In rare cases a user could have one raid disk using mbr and another using gpt +# In such cases we accept that the output may be incomplete + +# Calls get_ptb() for $bootpart or for all device in RAID +declare -A bootdevs +get_boot_devices() { + if device_is_raid "$bootpart"; then + slaves=$(mdraid_all_slaves "$bootpart") + + for slave in ${slaves[@]}; do + local disk="${slave%%[[:digit:]]*}" + device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR" + bootdevs[$slave]="$ptb" + done + else + local disk="${bootpart%%[[:digit:]]*}" + device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR" + bootdevs[$bootpart]="$ptb" + fi +} + +# Function Assumes the boot partition should be marked as active +# All other partitions should not have the boot flag set +set_active() { + # If any bootdev is a block device without partitions bail + # we want to set the boot flag on partitioned disk + for dev in "${!bootdevs[@]}"; do + dev_is_part $dev || { echo "$dev - is a block device. Aborting set_active!"; return 1; } + done + + # Clear BIOS Bootable Legacy Attribute for GPT drives + # In rare cases where a RAID device has slaves on the same block device + # Attribute 2 will be cleared for each partition multiple times + for dev in "${!bootdevs[@]}"; do + local ptb="${bootdevs[$dev]}" + if [[ "$ptb" = GPT ]]; then + local disk="${dev%%[[:digit:]]*}" #ex: /dev/sda + clear_gpt_attr2 "$disk" + fi + done + + # Set the boot flag on bootdevs (generated from get_boot_devices) + for part in "${!bootdevs[@]}"; do + local ptb="${bootdevs[$part]}" + local partnum="${part##*[[:alpha:]]}" + case "$part" in + *[[:digit:]]p[[:digit:]]*) + local disk="${part%%p$partnum}" # get everything before p1 + ;; + *) + local disk="${part%%[[:digit:]]*}" + ;; + esac + + if [[ "$ptb" = MBR ]]; then + if sfdisk "$disk" -A "$partnum" &>/dev/null; then + echo "Boot Flag Set - $part" + else + echo "FAILED to Set the boot flag on $part" + exit 3 + fi + elif [[ "$ptb" = GPT ]]; then + if sgdisk "$disk" --attributes="$partnum":set:2 &>/dev/null; then + echo "Attribute Legacy Bios Bootable Set - $part" + else + echo "FAILED to set attribute Legacy BIOS Bootable on $part" + exit 3 + fi + fi + done + return 0 +} + +install_mbr() { + # If any bootdev is a block device without partitions bail + # we want to install the mbr to a partitioned disk + for dev in "${!bootdevs[@]}"; do + dev_is_part "$dev" || { echo "$dev - is a block device. Aborting MBR install"; return 1; } + done + + for part in "${!bootdevs[@]}"; do + local partnum="${part##*[[:alpha:]]}" + case "$part" in + *[[:digit:]]p[[:digit:]]*) + local disk="${part%%p$partnum}" # get everything before p1 + ;; + *) + local disk="${part%%[[:digit:]]*}" + ;; + esac + local ptb="${bootdevs[$part]}" + + # We want to install to the root of the block device + # If the device is a partition - ABORT! + dev_is_part "$disk" && \ + { echo "ABORT! MBR installation to partition ($disk)!"; exit 4;} + + if [[ "$ptb" = MBR ]]; then + mbrfile="$bios_libpath/mbr.bin" + elif [[ "$ptb" = GPT ]]; then + mbrfile="$bios_libpath/gptmbr.bin" + fi + + if dd bs=440 count=1 conv=notrunc if="$mbrfile" of="$disk" &> /dev/null; then + echo "Installed MBR ($mbrfile) to $disk" + else + echo "Error Installing MBR ($mbrfile) to $disk" + exit 4 + fi + done + return 0 +} + +install_modules() { + # Copy all syslinux *.c32 modules to /boot + rm "$bios_bootpath"/*.c32 &> /dev/null + cp "$bios_libpath"/*.c32 "$bios_bootpath"/ &> /dev/null + + # Copy / Symlink pci.ids if pci.ids exists on the FS + if [[ -f "$pciids_file" ]]; then + rm "$bios_bootpath/pci.ids" &> /dev/null + cp "$pciids_file" "$bios_bootpath/pci.ids" &> /dev/null + fi +} + +_install() { + install_modules + + if device_is_raid "$bootpart" ; then + echo "Detected RAID on /boot - installing Syslinux with --raid" + "$EXTLINUX" --install "$bios_bootpath" --raid &> /dev/null + else + "$EXTLINUX" --install "$bios_bootpath" &> /dev/null + fi + + if (( $? )); then + echo "Syslinux BIOS install failed" + exit 2 + else + echo "Syslinux BIOS install successful" + fi + + touch "$CHROOT/$bios_autoupdate_file" +} + +update() { + install_modules + + if device_is_raid "$bootpart" ; then + echo "Detected RAID on /boot - updating Syslinux with --raid" + "$EXTLINUX" --update "$bios_bootpath" --raid &> /dev/null + else + "$EXTLINUX" --update "$bios_bootpath" &> /dev/null + fi + + if (($?)); then + echo "Syslinux BIOS update failed" + exit 2 + else + echo "Syslinux BIOS update successful" + fi +} + +if (( $# == 0 )); then + usage + exit 1 +fi + +while getopts "c:uihmas" opt; do + case $opt in + c) + CHROOT=$(readlink -e "$OPTARG") + if [[ -z $CHROOT ]]; then + echo "error: chroot path ``$OPTARG does not exist"; + exit 1 + fi + ;; + h) + USAGE="True" + ;; + i) + INSTALL="True" + ;; + u) + UPDATE="True" + ;; + m) + MBR="True" + ;; + a) + SET_ACTIVE="True" + ;; + s) + # If AUTOUPDATE_FILE does not exist exit the script + if [[ -f $bios_autoupdate_file ]]; then + UPDATE="True" + else + exit 0 + fi + ;; + *) + usage + exit 1 + ;; + esac +done + +if [[ $USAGE ]]; then + usage + exit 0 +fi + +# Display Usage Information if both Install and Update are passed +if [[ $INSTALL && $UPDATE ]]; then + usage + exit 1 +fi + +# Make sure only root can run our script +if (( $(id -u) != 0 )); then + echo "This script must be run as root" 1>&2 + exit 1 +fi + +# If a chroot dir is path set variables to reflect chroot +if [[ "$CHROOT" ]]; then + bios_libpath="$CHROOT$bios_libpath" + bios_bootpath="$CHROOT$bios_bootpath" + EXTLINUX="$CHROOT$EXTLINUX" +fi + +# Exit if no /boot path exists +if ( f=("$bios_bootpath"/*); (( ! ${#f[@]} )) ); then + echo "Error: $bios_bootpath is empty!" + echo "Is /boot mounted?" + exit 1 +fi + +# Get the boot device if any of these options are passed +if [[ $INSTALL || $UPDATE || $SET_ACTIVE || $MBR ]]; then + getBoot +fi + +# Install or Update +if [[ $INSTALL ]]; then + _install || exit +elif [[ $UPDATE ]]; then + update || exit +fi + + +# SET_ACTIVE and MBR +if [[ $SET_ACTIVE ]] || [[ $MBR ]]; then + get_boot_devices + + if [[ $SET_ACTIVE ]]; then + set_active || exit + fi + + if [[ $MBR ]]; then + install_mbr || exit + fi +fi + +exit 0 + +# vim: set et sw=4: |