summaryrefslogtreecommitdiff
path: root/libre/uboot4extlinux-am335x_bone
diff options
context:
space:
mode:
Diffstat (limited to 'libre/uboot4extlinux-am335x_bone')
-rw-r--r--libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch243
-rw-r--r--libre/uboot4extlinux-am335x_bone/PKGBUILD53
-rw-r--r--libre/uboot4extlinux-am335x_bone/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-am335x_bone/uEnv.txt1
-rw-r--r--libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install37
5 files changed, 0 insertions, 380 deletions
diff --git a/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 0f1c145da..000000000
--- a/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
---- u-boot-2015.04.orig/configs/am335x_evm_defconfig 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/configs/am335x_evm_defconfig 2016-02-24 12:05:57.627551576 -0300
-@@ -1,7 +1,6 @@
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
--CONFIG_CONS_INDEX=1
-+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
- CONFIG_ARM=y
- CONFIG_TARGET_AM335X_EVM=y
-diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
---- u-boot-2015.04.orig/include/configs/am335x_evm.h 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/am335x_evm.h 2016-02-24 12:09:41.983016704 -0300
-@@ -17,6 +17,7 @@
- #define __CONFIG_AM335X_EVM_H
-
- #include <configs/ti_am335x_common.h>
-+#define CONFIG_ENV_IS_NOWHERE
-
- #ifndef CONFIG_SPL_BUILD
- #ifndef CONFIG_FIT
-@@ -45,6 +46,9 @@
- /* Enhance our eMMC support / experience. */
- #define CONFIG_CMD_GPT
- #define CONFIG_EFI_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_SETEXPR
-
- #ifdef CONFIG_NAND
- #define NANDARGS \
-@@ -67,113 +71,90 @@
-
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- DEFAULT_LINUX_BOOT_ENV \
-- "boot_fdt=try\0" \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "bootfile=zImage\0" \
- "fdtfile=undefined\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "console=ttyO0,115200n8\0" \
- "partitions=" \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- "optargs=\0" \
-- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 ro\0" \
-- "mmcrootfstype=ext4 rootwait\0" \
-- "rootpath=/export/rootfs\0" \
-- "nfsopts=nolock\0" \
-- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-- "::off\0" \
-- "ramroot=/dev/ram0 rw\0" \
-- "ramrootfstype=ext2\0" \
-+ "cape_disable=\0" \
-+ "cape_enable=\0" \
-+ "cmdline=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "spiroot=/dev/mtdblock4 rw\0" \
-- "spirootfstype=jffs2\0" \
-- "spisrcaddr=0xe0000\0" \
-- "spiimgsize=0x362000\0" \
-- "spibusno=0\0" \
-- "spiargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${spiroot} " \
-- "rootfstype=${spirootfstype}\0" \
-- "netargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=/dev/nfs " \
-- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-- "ip=dhcp\0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcloados=run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdtaddr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-- "mmcboot=mmc dev ${mmcdev}; " \
-- "if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootscript; then " \
-- "run bootscript;" \
-- "else " \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "root=${root} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "for devnum in 0 1; do " \
-+ "if ${devtype} dev ${devnum}; then " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "gpio set 54;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "if test -n ${cape}; then " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+ "fi; " \
-+ "echo using: $fdtfile...; " \
-+ "fi; " \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "gpio set 55;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "gpio set 56;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "gpio clear 54; gpio clear 55;" \
-+ "setexpr devnum ${devnum} + 1;" \
- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run mmcloados;" \
-- "fi;" \
-- "fi ;" \
-- "fi;\0" \
-- "spiboot=echo Booting from spi ...; " \
-- "run spiargs; " \
-- "sf probe ${spibusno}:0; " \
-- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-- "bootz ${loadaddr}\0" \
-- "netboot=echo Booting from network ...; " \
-- "setenv autoload no; " \
-- "dhcp; " \
-- "tftp ${loadaddr} ${bootfile}; " \
-- "tftp ${fdtaddr} ${fdtfile}; " \
-- "run netargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+ "done;" \
-+ "done;\0" \
- "findfdt="\
- "if test $board_name = A335BONE; then " \
-- "setenv fdtfile am335x-bone.dtb; fi; " \
-+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- "if test $board_name = A335BNLT; then " \
-- "setenv fdtfile am335x-boneblack.dtb; fi; " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
- "if test $board_name = A33515BB; then " \
- "setenv fdtfile am335x-evm.dtb; fi; " \
- "if test $board_name = A335X_SK; then " \
-@@ -185,12 +166,11 @@
- #endif
-
- #define CONFIG_BOOTCOMMAND \
-- "run findfdt; " \
-- "run mmcboot;" \
-- "setenv mmcdev 1; " \
-- "setenv bootpart 1:2; " \
-+ "gpio set 53;" \
-+ "run findfdt;" \
- "run mmcboot;" \
-- "run nandboot;"
-+ "gpio clear 54; gpio clear 55;" \
-+ "gpio set 56"
-
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-@@ -329,9 +309,8 @@
- #endif
-
- #ifdef CONFIG_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+#define CONFIG_CMD_USB_MASS_STORAGE
-+#define CONFIG_USB_GADGET_MASS_STORAGE
-
- /* USB TI's IDs */
- #define CONFIG_G_DNL_VENDOR_NUM 0x0451
diff --git a/libre/uboot4extlinux-am335x_bone/PKGBUILD b/libre/uboot4extlinux-am335x_bone/PKGBUILD
deleted file mode 100644
index f1436af02..000000000
--- a/libre/uboot4extlinux-am335x_bone/PKGBUILD
+++ /dev/null
@@ -1,53 +0,0 @@
-# U-Boot: BeagleBone and BeagleBone Black
-# Maintainer: André Silva <emulatorman@parabola.nu>
-# Contributor: Jookia <166291@gmail.com>
-# Contributor: Márcio Silva <coadde@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot4extlinux-am335x_bone
-pkgver=2015.04
-pkgrel=1
-pkgdesc="U-Boot with Extlinux support for BeagleBone and BeagleBone Black"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-replaces=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
- 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
- 'uboot-beaglebone' 'uboot-am335x_bone')
-conflicts=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
- 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
- 'uboot-beaglebone' 'uboot-am335x_bone' 'uboot4grub-am335x_bone')
-makedepends=('bc')
-license=('GPL')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- '37784c8f8f52a615d65e775018d237fb'
- '068f6b4e8047115e73f29af5f384889b'
- 'ccb79775b81654e16fca18825c7f2506')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make am335x_evm_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-am335x_bone/extlinux.conf b/libre/uboot4extlinux-am335x_bone/extlinux.conf
deleted file mode 100644
index 52de94d49..000000000
--- a/libre/uboot4extlinux-am335x_bone/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-am335x_bone/uEnv.txt b/libre/uboot4extlinux-am335x_bone/uEnv.txt
deleted file mode 100644
index f432efc6b..000000000
--- a/libre/uboot4extlinux-am335x_bone/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=coherent_pool=1M
diff --git a/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install b/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install
deleted file mode 100644
index 4467c694e..000000000
--- a/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install
+++ /dev/null
@@ -1,37 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}