From caaea15a2ccb2bfd05407452d406cc86e89d9ae3 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Thu, 4 Sep 2014 18:38:24 -0300 Subject: texlive-core: remove libre suffix and add complex pkgrel --- libre/texlive-core-libre/09-texlive-fonts.conf | 9 - libre/texlive-core-libre/PKGBUILD | 333 ----------- libre/texlive-core-libre/texlive-core.maps | 61 -- libre/texlive-core-libre/texlive.install | 58 -- libre/texlive-core-libre/texmf.cnf | 782 ------------------------- libre/texlive-core-libre/texmfcnf.lua | 190 ------ 6 files changed, 1433 deletions(-) delete mode 100644 libre/texlive-core-libre/09-texlive-fonts.conf delete mode 100644 libre/texlive-core-libre/PKGBUILD delete mode 100644 libre/texlive-core-libre/texlive-core.maps delete mode 100644 libre/texlive-core-libre/texlive.install delete mode 100644 libre/texlive-core-libre/texmf.cnf delete mode 100644 libre/texlive-core-libre/texmfcnf.lua (limited to 'libre/texlive-core-libre') diff --git a/libre/texlive-core-libre/09-texlive-fonts.conf b/libre/texlive-core-libre/09-texlive-fonts.conf deleted file mode 100644 index f870fbd7a..000000000 --- a/libre/texlive-core-libre/09-texlive-fonts.conf +++ /dev/null @@ -1,9 +0,0 @@ - - - - /usr/share/texmf-dist/fonts/opentype - /usr/share/texmf-dist/fonts/truetype - /usr/local/share/texmf/fonts/opentype - /usr/local/share/texmf/fonts/truetype - - diff --git a/libre/texlive-core-libre/PKGBUILD b/libre/texlive-core-libre/PKGBUILD deleted file mode 100644 index 419a384e7..000000000 --- a/libre/texlive-core-libre/PKGBUILD +++ /dev/null @@ -1,333 +0,0 @@ -# Maintainer (Arch): Rémy Oudompheng -# Maintainer: Michał Masłowski -# Contributor: André Silva - -pkgname=texlive-core-libre -_pkgname=texlive-core -pkgver=2014.34872 -_revnr=${pkgver#2014.} -pkgrel=1 -pkgdesc="TeX Live core distribution, without nonfree add-on packages (Parabola rebranded)" -license=('GPL') -arch=(any) -depends=('texlive-bin' 'perl') -optdepends=( - 'dialog: for texconfig' - 'ghostscript: for epstopdf, epspdf and other ConTeXt tools' - 'java-runtime: for utilities like arara' - 'perl-tk: for texdoctk' - 'psutils: to manipulate the output of dvips' - 'python: for pythontex' - 'python2: for dviasm' - 'ruby: for old ConTeXT MkII and epspdf' - 't1utils: can be useful when installing Type1 fonts' -) -groups=('texlive-most') -conflicts=('tetex' 'texlive-latex3' 'texlive-core') -provides=('tetex' 'texlive-latex3' "texlive-core=$pkgver") -replaces=('tetex' 'texlive-latex3' 'texlive-core') -url='http://tug.org/texlive/' -mksource=("ftp://ftp.archlinux.org/other/texlive/$_pkgname-$pkgver-src.zip") -noextract=("$_pkgname-$pkgver-src.zip") -source=("https://repo.parabolagnulinux.org/other/$pkgname/$pkgname-$pkgver-src.tar.xz" - "$_pkgname.maps" - "texmf.cnf" - "texmfcnf.lua" - "09-texlive-fonts.conf") -install=texlive.install -backup=(etc/texmf/web2c/texmf.cnf \ - etc/texmf/chktex/chktexrc \ - etc/texmf/dvipdfmx/dvipdfmx.cfg \ - etc/texmf/dvips/config/config.ps \ - etc/texmf/tex/generic/config/language.dat \ - etc/texmf/tex/generic/config/language.def \ - etc/texmf/tex/generic/config/pdftexconfig.tex \ - etc/texmf/ttf2pk/ttf2pk.cfg \ - etc/texmf/web2c/fmtutil.cnf \ - etc/texmf/web2c/mktex.cnf \ - etc/texmf/xdvi/XDvi) -mkmd5sums=('65e63bdefdc909b9d6e6624924e53feb') -md5sums=('016626916175b074e98b6f1aa9fa9ff7' - '75c813acb5df57d174e4bd07019adf34' - 'd5a3f442ec3b7aa1518170f64f9d006b' - '16ad4dc53deb00029baef1b01ba1d984' - '393a4bf67adc7ca5df2b386759d1a637') - -mksource() { - mkdir $_pkgname-$pkgver - pushd $_pkgname-$pkgver - bsdtar xfv ../$_pkgname-$pkgver-src.zip - - # remove nonfree packages - # MeX licensed packages. - rm -v {cc-pl,cs,ec,mex,pl}.tar.xz - # Public domain, will be relicensed. - rm -v context-{account,algorithmic,fixme,games,letter,ruby}.tar.xz - # No specific free license. - rm -v euro-ce.tar.xz - # Remove their references from package list. - sed -ri '/^(cc-pl|cs|ec|mex|pl|context-(account|algorithmic|fixme|games|letter|ruby)|euro-ce) /d' CONTENTS - - popd -} - -build() { - cd $srcdir/$_pkgname-$pkgver - echo -n " --> extracting all packages... " - for p in *.tar.xz; do - bsdtar -xf $p - done - echo "done" - rm -rf source doc - - # remove nonfree packages references from updmap.cfg - sed -i '/ccpl.map/d' texmf-dist/web2c/updmap.cfg - sed -i '/cs-charter.map/d' texmf-dist/web2c/updmap.cfg - sed -i '/csfonts.map/d' texmf-dist/web2c/updmap.cfg - sed -i '/plother.map/d' texmf-dist/web2c/updmap.cfg - sed -i '/pltext.map/d' texmf-dist/web2c/updmap.cfg - - # remove nonfree packages references from texlive-core.maps - sed -i '/ccpl.map/d' $srcdir/$_pkgname.maps - sed -i '/cs-charter.map/d' $srcdir/$_pkgname.maps - sed -i '/csfonts.map/d' $srcdir/$_pkgname.maps - sed -i '/plother.map/d' $srcdir/$_pkgname.maps - sed -i '/pltext.map/d' $srcdir/$_pkgname.maps - - # remove nonfree packages references from fmtutil.cnf - sed -i '/cslatex/d' texmf-dist/web2c/fmtutil.cnf - sed -i '/csplain/d' texmf-dist/web2c/fmtutil.cnf - sed -i '/from mex/d' texmf-dist/web2c/fmtutil.cnf - sed -i '/mexconf.tex/d' texmf-dist/web2c/fmtutil.cnf -} - -package() { - cd $srcdir/$_pkgname-$pkgver - # Install packages. - install -m755 -d $pkgdir/var/lib/texmf/arch/installedpkgs - sed -i '/^#/d' CONTENTS - install -m644 CONTENTS $pkgdir/var/lib/texmf/arch/installedpkgs/${_pkgname}_${_revnr}.pkgs - install -m644 $srcdir/$_pkgname.maps $pkgdir/var/lib/texmf/arch/installedpkgs/ - install -m755 -d $pkgdir/usr/share - wanteddirs=$(for d in *; do test -d $d && [[ $d != texmf* ]] && echo $d; done) || true - for dir in $wanteddirs; do - find $dir -type d -exec install -d -m755 $pkgdir/usr/share/texmf-dist/'{}' \; - find $dir -type f -exec install -m644 '{}' $pkgdir/usr/share/texmf-dist/'{}' \; - done - find texmf-dist -type d -exec install -d -m755 $pkgdir/usr/share/'{}' \; - find texmf-dist -type f -exec install -m644 '{}' $pkgdir/usr/share/'{}' \; - find texmf-dist -type f -executable -exec chmod 755 $pkgdir/usr/share/'{}' \; - - ############################################################# - ### install texmf tree - echo "--> installing the /etc/texmf tree" - install -d -m755 "$pkgdir"/etc/texmf/web2c - install -d -m755 "$pkgdir"/etc/texmf/chktex - install -d -m755 "$pkgdir"/etc/texmf/dvips/config - install -d -m755 "$pkgdir"/etc/texmf/dvipdfmx - install -d -m755 "$pkgdir"/etc/texmf/tex/generic/config - install -d -m755 "$pkgdir"/etc/texmf/ttf2pk - install -d -m755 "$pkgdir"/etc/texmf/xdvi - install -d -m755 "$pkgdir"/etc/fonts/conf.avail - install -m644 "$srcdir"/09-texlive-fonts.conf "$pkgdir"/etc/fonts/conf.avail/ - - # Remove manpages (already in texlive-bin). - rm -rf "$pkgdir"/usr/share/texmf-dist/doc/man - - # copy config files to $TEXMFCONFIG tree - cp -a "$pkgdir"/usr/share/texmf-dist/chktex/chktexrc \ - "$pkgdir"/etc/texmf/chktex/ - cp -a "$pkgdir"/usr/share/texmf-dist/web2c/mktex.cnf \ - "$pkgdir"/etc/texmf/web2c/ - cp -a "$pkgdir"/usr/share/texmf-dist/web2c/updmap.cfg \ - "$pkgdir"/etc/texmf/web2c/ - cp -a "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil.cnf \ - "$pkgdir"/etc/texmf/web2c/ - cp -a "$pkgdir"/usr/share/texmf-dist/dvips/config/config.ps \ - "$pkgdir"/etc/texmf/dvips/config/ - cp -a "$pkgdir"/usr/share/texmf-dist/dvipdfmx/dvipdfmx.cfg \ - "$pkgdir"/etc/texmf/dvipdfmx/ - cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/pdftexconfig.tex \ - "$pkgdir"/etc/texmf/tex/generic/config/ - cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.dat \ - "$pkgdir"/etc/texmf/tex/generic/config/ - cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.def \ - "$pkgdir"/etc/texmf/tex/generic/config/ - cp -a "$pkgdir"/usr/share/texmf-dist/ttf2pk/ttf2pk.cfg \ - "$pkgdir"/etc/texmf/ttf2pk/ - cp -a "$pkgdir"/usr/share/texmf-dist/xdvi/XDvi \ - "$pkgdir"/etc/texmf/xdvi/ - # remove TL specific warnings in the language.{dat,def} files: - sed -i -e '/DO NOT EDIT/,+3 d' "$pkgdir"/etc/texmf/tex/generic/config/language.* - # clean updmap.cfg - sed -i '/^\(Map\|MixedMap\)/d' "$pkgdir"/etc/texmf/web2c/updmap.cfg - sed -i '/^#! \(Map\|MixedMap\)/d' "$pkgdir"/etc/texmf/web2c/updmap.cfg - - - # replace upstream texmf.cnf with ours - rm -f "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf - install -m644 "$srcdir"/texmf.cnf "$pkgdir"/etc/texmf/web2c/texmf.cnf - # since the location of texmf.cnf is hard-wired to be under /usr/share/texmf/web2c - # we make a symlink from /etc/texmf/web2c/texmf.cnf to the latter - ln -sf /etc/texmf/web2c/texmf.cnf "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf - # replace upstream texmfcnf.lua with ours - install -m644 "$srcdir"/texmfcnf.lua "$pkgdir"/usr/share/texmf-dist/web2c/texmfcnf.lua - ## remove aleph from fmtutil.cnf - sed -i -e '/aleph/d' "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil.cnf - - # create symlinks for formats - echo "--> Create symlinks for TeX formats ..." - mkdir -p "${pkgdir}/usr/bin" - bash "${pkgdir}"/usr/share/texmf-dist/scripts/texlive/texlinks.sh -f "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil.cnf "$pkgdir"/usr/bin/ - - # use python2 instead of python for scripts. - sed -i '1s/python/python2/' $pkgdir/usr/share/texmf-dist/scripts/de-macro/de-macro - sed -i 's/env python/env python2/' $pkgdir/usr/share/texmf-dist/scripts/dviasm/dviasm.py - - # install Perl libraries - mv "$pkgdir"/usr/share/texmf-dist/tlpkg "$pkgdir"/usr/share - rm -rf "$pkgdir"/usr/share/tlpkg/tlpobj - - # copy config file to texmf-config - #mkdir -p $pkgdir/etc/texmf/tex/context/config - #cp -a $pkgdir/usr/share/texmf-dist/tex/context/config/cont-usr.tex \ - # $pkgdir/etc/texmf/tex/context/config/cont-usr.tex - - # remove obsolete stuff (we don't provide the omega and aleph binaries anyway) - rm -f $pkgdir/usr/share/texmf-dist/tex/plain/config/{omega,aleph}.ini - #sed -i '/cherokee\.map/d; /oinuit\.map/d; /omega\.map/d' \ - # "${pkgdir}/usr/share/texmf-dist/web2c/updmap.cfg" - - # remove upstream updmap.cfg: it contains too many maps. - rm "${pkgdir}/usr/share/texmf-dist/web2c/updmap.cfg" - - # more cleanup - rm -rf $pkgdir/usr/share/texmf-dist/scripts/context/stubs/mswin/ - - # link programs from /usr/share/texmf-dist/scripts - _linked_scripts=" -a2ping/a2ping.pl -accfonts/mkt1font -accfonts/vpl2ovp -accfonts/vpl2vpl -adhocfilelist/adhocfilelist.sh -arara/arara.sh -bundledoc/arlatex -bundledoc/bundledoc -checkcites/checkcites.lua -chktex/chkweb.sh -chktex/deweb.pl -context/perl/mptopdf.pl -context/stubs/unix/context -context/stubs/unix/contextjit -context/stubs/unix/ctxtools -context/stubs/unix/luatools -context/stubs/unix/mtxrun -context/stubs/unix/mtxrunjit -context/stubs/unix/pstopdf -context/stubs/unix/texexec -context/stubs/unix/texmfstart -ctanify/ctanify -ctanupload/ctanupload.pl -de-macro/de-macro -dosepsbin/dosepsbin.pl -dtxgen/dtxgen -dviasm/dviasm.py -epstopdf/epstopdf.pl -findhyph/findhyph -fontools/afm2afm -fontools/autoinst -fontools/ot2kpx -fragmaster/fragmaster.pl -installfont/installfont-tl -latex-git-log/latex-git-log -latex2man/latex2man -latexdiff/latexdiff-vc.pl -latexdiff/latexdiff.pl -latexdiff/latexrevise.pl -latexfileversion/latexfileversion -latexindent/latexindent.pl -latexmk/latexmk.pl -latexpand/latexpand -ltxfileinfo/ltxfileinfo -ltximg/ltximg.pl -lua2dox/lua2dox_filter -luaotfload/luaotfload-tool.lua -match_parens/match_parens -mf2pt1/mf2pt1.pl -mkjobtexmf/mkjobtexmf.pl -oberdiek/pdfatfi.pl -pdfcrop/pdfcrop.pl -pdfjam/pdf180 -pdfjam/pdf270 -pdfjam/pdf90 -pdfjam/pdfbook -pdfjam/pdfflip -pdfjam/pdfjam -pdfjam/pdfjam-pocketmod -pdfjam/pdfjam-slides3up -pdfjam/pdfjam-slides6up -pdfjam/pdfjoin -pdfjam/pdfnup -pdfjam/pdfpun -pfarrei/a5toa4.tlu -pfarrei/pfarrei.tlu -pkfix-helper/pkfix-helper -pkfix/pkfix.pl -ps2eps/ps2eps.pl -purifyeps/purifyeps -pythontex/pythontex.py -pythontex/depythontex.py -simpdftex/simpdftex -sty2dtx/sty2dtx.pl -texcount/texcount.pl -texdef/texdef.pl -texdiff/texdiff -texdirflatten/texdirflatten -texdoc/texdoc.tlu -texdoctk/texdoctk.pl -texfot/texfot.pl -texlive/allcm.sh -texlive/allneeded.sh -texlive/dvi2fax.sh -texlive/dvired.sh -texlive/e2pall.sh -texlive/fmtutil-sys.sh -texlive/fmtutil.sh -texlive/fontinst.sh -texlive/kpsetool.sh -texlive/kpsewhere.sh -texlive/ps2frag.sh -texlive/pslatex.sh -texlive/rungs.tlu -texlive/texconfig-dialog.sh -texlive/texconfig-sys.sh -texlive/texconfig.sh -texlive/texlinks.sh -texlive/updmap-sys.sh -texlive/updmap.pl -texliveonfly/texliveonfly.py -texloganalyser/texloganalyser -thumbpdf/thumbpdf.pl -typeoutfileinfo/typeoutfileinfo.sh -xindy/texindy.pl -xindy/xindy.pl -" - install -m755 -d $pkgdir/usr/bin - for _script in ${_linked_scripts}; do - _scriptbase=$(basename $_script) - _scriptbase=${_scriptbase%.*} - [[ -f ${pkgdir}/usr/share/texmf-dist/scripts/${_script} ]] && - ln -s /usr/share/texmf-dist/scripts/${_script} ${pkgdir}/usr/bin/${_scriptbase} - done - ln -s /usr/share/texmf-dist/scripts/listings-ext/listings-ext.sh ${pkgdir}/usr/bin/listings-ext.sh - - # additional symlinks - ln -s allcm ${pkgdir}/usr/bin/allec - ln -s fmtutil ${pkgdir}/usr/bin/mktexfmt - ln -s kpsetool ${pkgdir}/usr/bin/kpsexpand - ln -s kpsetool ${pkgdir}/usr/bin/kpsepath - ln -s epstopdf ${pkgdir}/usr/bin/repstopdf - ln -s pdfcrop ${pkgdir}/usr/bin/rpdfcrop - ln -s luaotfload-tool ${pkgdir}/usr/bin/mkluatexfontdb -} diff --git a/libre/texlive-core-libre/texlive-core.maps b/libre/texlive-core-libre/texlive-core.maps deleted file mode 100644 index 8cb9a9689..000000000 --- a/libre/texlive-core-libre/texlive-core.maps +++ /dev/null @@ -1,61 +0,0 @@ -Map euler.map -Map charter.map -Map cs-charter.map -Map csfonts.map -Map dummy-space.map -Map fpls.map -Map garuda-c90.map -Map l7x-urwvn.map -Map lm.map -Map marvosym.map -Map mathpple.map -Map norasi-c90.map -Map original-context-symbol.map -Map pazo.map -Map pxfonts.map -Map qag.map -Map qbk.map -Map qcr.map -Map qcs.map -Map qhv.map -Map qpl.map -Map qtm.map -Map qzc.map -Map tabvar.map -Map troff-updmap.map -Map txfonts.map -Map uag.map -Map ubk.map -Map ucr.map -Map uhv.map -Map unc.map -Map upl.map -Map usy.map -Map utm.map -Map utopia.map -Map uzc.map -Map uzd.map -MixedMap arss.map -MixedMap artm.map -MixedMap ccpl.map -MixedMap cm-super-t1.map -MixedMap cm-super-t2a.map -MixedMap cm-super-t2b.map -MixedMap cm-super-t2c.map -MixedMap cm-super-ts1.map -MixedMap cm-super-x2.map -MixedMap cm.map -MixedMap cmextra.map -MixedMap cmtext-bsr-interpolated.map -MixedMap cyrillic.map -MixedMap eurosym.map -MixedMap latxfont.map -MixedMap mflogo.map -MixedMap plother.map -MixedMap pltext.map -MixedMap rsfs.map -MixedMap stmaryrd.map -MixedMap symbols.map -MixedMap tipa.map -MixedMap wasy.map -MixedMap yhmath.map diff --git a/libre/texlive-core-libre/texlive.install b/libre/texlive-core-libre/texlive.install deleted file mode 100644 index 77d4213be..000000000 --- a/libre/texlive-core-libre/texlive.install +++ /dev/null @@ -1,58 +0,0 @@ -PKGNAME="texlive-core" -UPDMAP="etc/texmf/web2c/updmap.cfg" -UPDMAPLOCAL="etc/texmf/web2c/updmap-local.cfg" -SYNCWITHTREES='' - -MAPFILE="var/lib/texmf/arch/installedpkgs/$PKGNAME.maps" - -post_install() { - TMPFILE=`mktemp` - echo ">>> texlive: saving updmap.cfg as $TMPFILE..." - cp "$UPDMAP" "$TMPFILE" - echo ">>> texlive: regenerating updmap.cfg (custom additions should go" - echo " into /etc/texmf/web2c/updmap-local.cfg" - cp usr/share/texmf-dist/web2c/updmap-hdr.cfg $UPDMAP - cat var/lib/texmf/arch/installedpkgs/*.maps >> $UPDMAP - [ -f "$UPDMAPLOCAL" ] && cat "$UPDMAPLOCAL" >> $UPDMAP - echo ">>> texlive: updating the filename database..." - usr/bin/mktexlsr - echo ">>> texlive: updating the fontmap files with updmap..." - usr/bin/updmap-sys --quiet --nohash - echo " done." - echo -n "creating all formats..." - usr/bin/fmtutil-sys --all 1>/dev/null - echo " done." - echo " (logs are under /var/lib/texmf/web2c//.log)" - echo "NB: To setup ConTeXt and the lua(la)tex font db," - echo " see http://wiki.archlinux.org/index.php/TeX_Live" -} - -post_upgrade() { - TMPFILE=`mktemp` - echo ">>> texlive: saving updmap.cfg as $TMPFILE..." - cp "$UPDMAP" "$TMPFILE" - echo ">>> texlive: regenerating updmap.cfg (custom additions should go" - echo " into /etc/texmf/web2c/updmap-local.cfg" - cp usr/share/texmf-dist/web2c/updmap-hdr.cfg $UPDMAP - cat var/lib/texmf/arch/installedpkgs/*.maps >> $UPDMAP - [ -f "$UPDMAPLOCAL" ] && cat "$UPDMAPLOCAL" >> $UPDMAP - echo ">>> texlive: updating the filename database..." - usr/bin/mktexlsr - echo ">>> texlive: updating the fontmap files with updmap..." - usr/bin/updmap-sys --quiet --nohash $SYNCWITHTREES - echo " done." - echo ">>> texlive: recreating all formats..." - usr/bin/fmtutil-sys --all 1>/dev/null - echo " done." - echo " (logs are under /var/lib/texmf/web2c//.log)" - echo "NB: To setup ConTeXt and the lua(la)tex font db," - echo " see http://wiki.archlinux.org/index.php/TeX_Live" - if [[ "$2" == 200* ]]; then - echo "Important note. Some directories have moved:" - echo " \$TEXMFSYSVAR is now /var/lib/texmf (previously /usr/share/texmf-var)" - echo " \$TEXMFSYSCONFIG is now /etc/texmf (previously /usr/share/texmf-config)" - echo "Please move and update the config files you had modified and delete the rest." - echo "(Note however that updmap.cfg has been automatically copied and updated.)" - fi -} - diff --git a/libre/texlive-core-libre/texmf.cnf b/libre/texlive-core-libre/texmf.cnf deleted file mode 100644 index c96c20e39..000000000 --- a/libre/texlive-core-libre/texmf.cnf +++ /dev/null @@ -1,782 +0,0 @@ -% texmf.cnf for TeXLive/Parabola GNU/Linux-libre -- runtime path configuration file for kpathsea. -% Public domain. -% -% If you modify this original file, YOUR CHANGES WILL BE LOST when it is -% updated. Instead, put your changes -- and only your changes, not an -% entire copy! -- in ../../texmf.cnf. That is, if this file is -% installed in /some/path/to/texlive/2013/texmf-dist/web2c/texmf.cnf, -% add your custom settings to /some/path/to/texlive/2013/texmf.cnf. -% -% What follows is a super-summary of what this .cnf file can -% contain. Please read the Kpathsea manual for more information. -% -% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned. -% The `=' (and surrounding spaces) is optional. -% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo. -% Long lines can be continued with a \. -% -% Earlier entries (in the same or another file) override later ones, and -% an environment variable foo overrides any texmf.cnf definition of foo. -% -% All definitions are read before anything is expanded, so you can use -% variables before they are defined. -% -% If a variable assignment is qualified with `.PROGRAM', it is ignored -% unless the current executable (last filename component of argv[0]) is -% named PROGRAM. This foo.PROGRAM construct is not recognized on the -% right-hand side. For environment variables, use FOO_PROGRAM. -% -% Which file formats use which paths for searches is described in the -% various programs' and the Kpathsea documentation (http://tug.org/kpathsea). -% -% // means to search subdirectories (recursively). -% A leading !! means to look only in the ls-R db, never on the disk. -% In this file, either ; or : can be used to separate path components. -% A leading/trailing/doubled path separator in the paths will be -% expanded into the compile-time default. Probably not what you want. -% -% Brace notation is supported, for example: /usr/local/{mytex,othertex} -% expands to /usr/local/mytex:/usr/local/othertex. We make extensive -% use of this. - - -% Part 1: Search paths and directories. - -% This is the parent directory of our several trees, i.e., -% /usr/local/texlive/YYYY in the original TeX Live distribution. -% -% All trees must be organized according to the TeX Directory Structure -% (http://tug.org/tds), or files may not be found. -% -% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share. -% Kpathsea sets SELFAUTOLOC (the directory with the binary), -% SELFAUTODIR (its parent), and SELFAUTOPARENT (its grandparent). -TEXMFROOT = $SELFAUTODIR/share - -% The main tree of distributed packages and programs: -TEXMFDIST = $TEXMFROOT/texmf-dist - -% We used to have a separate /texmf tree with some core programs and files. -% Keep the variable name. -TEXMFMAIN = $TEXMFDIST - -% Local additions to the distribution trees. -TEXMFLOCAL = /usr/local/share/texmf;/usr/share/texmf - -% TEXMFSYSVAR, where *-sys store cached runtime data. -TEXMFSYSVAR = /var/lib/texmf - -% TEXMFSYSCONFIG, where *-sys store configuration data. -TEXMFSYSCONFIG = /etc/texmf - -% Per-user texmf tree(s) -- organized per the TDS, as usual. To define -% more than one per-user tree, set this to a list of directories in -% braces, as described above. (This used to be HOMETEXMF.) ~ expands -% to %USERPROFILE% on Windows, $HOME otherwise. -TEXMFHOME = ~/texmf - -% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data. -TEXMFVAR = ~/.texlive/texmf-var - -% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data. -TEXMFCONFIG = ~/.texlive/texmf-config - -% List all the texmf trees. For an explanation of what they are, see the -% TeX Live manual. -% -% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named -% explicitly and before all other trees. -% -% TEXMFLOCAL precedes TEXMFDIST because locally-installed versions -% should take precedence over distribution files -- although it is -% generally a source of confusion to have different versions of a -% package installed, whatever the trees, so try to avoid it. -TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST} - -% Where to look for ls-R files. There need not be an ls-R in the -% directories in this path, but if there is one, Kpathsea will use it. -% By default, this is only the !! elements of TEXMF, so that mktexlsr -% does not create ls-R files in the non-!! elements -- because if an -% ls-R is present, it will be used, and the disk will not be searched. -% This is arguably a bug in kpathsea. -TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST} - -% The system trees. These are the trees that are shared by all users. -% If a tree appears in this list, the mktex* scripts will use -% VARTEXFONTS for generated files, if the original tree isn't writable; -% otherwise the current working directory is used. -SYSTEXMF = $TEXMFSYSVAR;$TEXMFLOCAL;$TEXMFDIST - -% First writable tree here is used by Lua(La)TeX for the font cache. -% LuaLaTeX uses the value here, while ConTeXt uses the same variable but -% from texmfcnf.lua; therefore the two values should be kept in sync. -% (As should everything else in texmf.cnf <-> texmfcnf.lua.) -TEXMFCACHE = $TEXMFSYSVAR;$TEXMFVAR - -% Where generated fonts may be written. This tree is used when the sources -% were found in a system tree and either that tree wasn't writable, or the -% varfonts feature was enabled in MT_FEATURES in mktex.cnf. -VARTEXFONTS = $TEXMFVAR/fonts - -% On some systems, there will be a system tree which contains all the font -% files that may be created as well as the formats. For example -% TEXMFVAR = /var/lib/texmf -% is used in many distros. In this case, set VARTEXFONTS like this -%VARTEXFONTS = $TEXMFVAR/fonts -% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR). -% -% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below -% one of the TEXMF directories (avoids overlapping ls-R files). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% Usually you will not need to edit any of the following variables. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% WEB2C is for Web2C specific files. The current directory may not be -% a good place to look for them. -WEB2C = $TEXMF/web2c - -% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input -% or \openin, including .sty, .eps, etc. We specify paths for all known -% formats, past or present. Not all of them are built these days. - -% Plain TeX. Have the command tex check all directories as a last -% resort, we may have plain-compatible stuff anywhere. -TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}// - -% Fontinst needs to read afm files. -TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}// - -% Other plain-based formats. -TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}// -TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}// -TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}// -TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}// -TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// - -% LaTeX 2e specific macros are stored in latex/, macros that can only be -% used with 2.09 in latex209/. In addition, we look in the directory -% latex209, useful for macros that were written for 2.09 and do not -% mention 2e at all, but can be used with 2e. -TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// -TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}// -TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}// - -% MLTeX. -TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}// -TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}// -TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}// - -% e-TeX. -TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}// - -% pdfTeX. -TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// -TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}// -TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// -TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}// - -% pdfeTeX. -TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}// - -% pdfxTeX. -TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}// - -% LuaTeX. -TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}// -TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}// - -% XeTeX. -TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}// -TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}// -TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}// - -% Omega / Aleph. -TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.lamed = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}// - -% p(La)TeX. -TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,plain,generic,}// -TEXINPUTS.platex = .;$TEXMF/tex/{platex,latex,generic,}// - -% epTeX, and for pmpost. -TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,plain,generic,}// -TEX.pmpost = eptex - -% (e)up(La)TeX. -TEXINPUTS.uplatex = .;$TEXMF/tex/{uplatex,platex,latex,generic,}// -TEXINPUTS.uptex = .;$TEXMF/tex/{uptex,ptex,plain,generic,}// -TEXINPUTS.euptex = .;$TEXMF/tex/{uptex,ptex,plain,generic}// - -% pBibTeX bibliographies and style files. -BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib// -BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst// - -% ConTeXt. -TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic}// - -% jadetex. -TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}// -TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}// - -% XMLTeX. -TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// -TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// - -% Miscellany, no longer built. -TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}// -TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}// -TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}// -TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}// - -% Earlier entries override later ones, so put this generic one last. -TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}// - -% ttf2tfm. -TTF2TFMINPUTS = .;$TEXMF/ttf2pk// - -% Metafont, MetaPost inputs. -MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source// -MPINPUTS = .;$TEXMF/metapost// - -% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read. -% We want to find the engine-specific file, e.g., cont-en.fmt can -% exist under both pdftex/ and xetex/. But just in case some formats -% end up without an engine directory, look directly in web2c/ too. -% We repeat the same definition three times because of the way fmtutil -% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats -% will not be found. -TEXFORMATS = .;$TEXMF/web2c{/$engine,} -MFBASES = .;$TEXMF/web2c{/$engine,} -MPMEMS = .;$TEXMF/web2c{/$engine,} -% -% As of 2008, pool files don't exist any more (the strings are compiled -% into the binaries), but just in case something expects to find these: -TEXPOOL = .;$TEXMF/web2c -MFPOOL = ${TEXPOOL} -MPPOOL = ${TEXPOOL} - -% support the original xdvi. Must come before the generic settings. -PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}// -VFFONTS.XDvi = .;$TEXMF/%s -PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}// -TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}// - -% Device-independent font metric files. -VFFONTS = .;$TEXMF/fonts/vf// -TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm// - -% The $MAKETEX_MODE below means the drivers will not use a cx font when -% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init -% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual. -% The modeless part guarantees that bitmaps for PostScript fonts are found. -PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}// - -% Similarly for the GF format, which only remains in existence because -% Metafont outputs it (and MF isn't going to change). -GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE// - -% A backup for PKFONTS and GFFONTS. Not used for anything. -GLYPHFONTS = .;$TEXMF/fonts - -% A place to puth everything that doesn't fit the other font categories. -MISCFONTS = .;$TEXMF/fonts/misc// - -% font name map files. This isn't just fonts/map// because ConTeXt -% wants support for having files with the same name in the different -% subdirs. Maybe if the programs ever get unified to accepting the same -% map file syntax the definition can be simplified again. -TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}// - -% BibTeX bibliographies and style files. bibtex8 also uses these. -BIBINPUTS = .;$TEXMF/bibtex/bib// -BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}// - -% MlBibTeX. -MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}// -MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}// - -% .ris and .bltxml bibliography formats. -RISINPUTS = .;$TEXMF/bibtex/ris// -BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml// - -% MFT style files. -MFTINPUTS = .;$TEXMF/mft// - -% PostScript headers and prologues (.pro); unfortunately, some programs -% also use this for acessing font files (enc, type1, truetype) -TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}// -TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}// - -% OSFONTDIR is to provide a convenient hook for allowing TeX to find -% fonts installed on the system (outside of TeX). An empty default -% value would add "//" to the search paths, so we give it a dummy value. -% OSFONTDIR = /usr/share/fonts - -% PostScript Type 1 outline fonts. -T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR// - -% PostScript AFM metric files. -AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR// - -% TrueType outline fonts. -TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR// - -% OpenType outline fonts. -OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR// - -% Type 42 outline fonts. -T42FONTS = .;$TEXMF/fonts/type42// - -% Ligature definition files. -LIGFONTS = .;$TEXMF/fonts/lig// - -% Dvips' config.* files (this name should not start with `TEX'!). -TEXCONFIG = $TEXMF/dvips// - -% Makeindex style (.ist) files. -INDEXSTYLE = .;$TEXMF/makeindex// - -% Font encoding files (.enc). -ENCFONTS = .;$TEXMF/fonts/enc// - -% CMap files. -CMAPFONTS = .;$TEXMF/fonts/cmap// - -% Subfont definition files. -SFDFONTS = .;$TEXMF/fonts/sfd// - -% OpenType feature files (.fea). -FONTFEATURES=.;$TEXMF/fonts/fea// - -% .cid and .cidmap -FONTCIDMAPS=.;$TEXMF/fonts/cid// - -% pdftex config files: -PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}// - -% Used by DMP (ditroff-to-mpx), called by makempx -troff. -TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps -MPSUPPORT = .;$TEXMF/metapost/support - -% For xdvi to find mime.types and .mailcap, if they do not exist in -% ~. These are single directories, not paths. -% (But the default mime.types, at least, may well suffice.) -MIMELIBDIR = /etc -MAILCAPLIBDIR = /etc - -% Default settings for the fontconfig library as used by the Windows -% versions of xetex/xdvipdfmx. Not used by xetex on Unixish systems. -% ConTeXT MkIV (all platforms) also use these values. -% -FONTCONFIG_FILE = fonts.conf -FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf -FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache - -% TeX documentation and source files, for use with texdoc and kpsewhich. -TEXDOCS = $TEXMF/doc// -TEXSOURCES = .;$TEXMF/source// - -% Web and CWeb input paths. -WEBINPUTS = .;$TEXMF/web// -CWEBINPUTS = .;$TEXMF/cweb// - -% Omega-related fonts and other files. -OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}// -OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl// -OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}// -OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp// -OTPINPUTS = .;$TEXMF/omega/otp// -OCPINPUTS = .;$TEXMF/omega/ocp// - -% Some additional input variables for several programs. If you add -% a program that uses the `other text files' or `other binary files' -% search formats, you'll want to add their variables here as well. -T4HTINPUTS = .;$TEXMF/tex4ht// - -%% t4ht utility, sharing files with TeX4ht -TEX4HTFONTSET=alias,iso8859,unicode -TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}// - -% TeXworks editor configuration and settings -TW_LIBPATH = $TEXMFCONFIG/texworks -TW_INIPATH = $TW_LIBPATH - -% For security, do not look in . for dvipdfmx.cfg, since the D option -% would allow command execution. -DVIPDFMXINPUTS = $TEXMF/dvipdfmx - -% Lua needs to look in TEXINPUTS for lua scripts distributed with packages. -% -% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in -% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended -% default expansion of TEXINPUTS will not happen and .lua files under -% the /tex/ will not be found. -% -% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex. -% The default LUAINPUTS suffices for luatex and dviluatex. -% -LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}// - -% Lua needs to look for binary lua libraries distributed with packages. -CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua// - -% Architecture independent executables. -TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}// - -% Other languages. -JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java// -PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl// -PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python// -RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby// - - -%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment. -% KPSE_DOT = . - -% This definition isn't used from this .cnf file itself (that would be -% paradoxical), but the compile-time default in paths.h is built from it. -% The SELFAUTO* variables are set automatically from the location of -% argv[0], in kpse_set_program_name. -% -% This main texmf.cnf file is installed, for a release YYYY, in a -% directory such as /usr/local/texlive/YYYY/texmf-dist/web2c/texmf.cnf. -% Since this file is subject to future updates, the TeX Live installer -% or human administrator may also create a file -% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file -% will take precedence over the distributed one. -% -% For security reasons, it is best not to include . in this path. -% -% The idea behind this lengthy definition: for each of -% SELFAUTO{LOC,DIR,PARENT}, look in the directory, -% then the subdirectories share/texmf-local, share/texmf-dist, share/texmf, -% then the subdirectories ./texmf-local, texmf-dist, ./texmf. -% At any given installation, most of these directories will not exist, -% but they all turn out to be useful somewhere. -% -% Special addition -- we want to include one more directory: the -% great-grandparent's texmf-local, because that is how TL is installed -% by default. That is, given a binary -% /usr/local/texlive/YYYY/bin/PLATFORM/kpsewhich, it should find -% /usr/local/texlive/texmf-local/web2c/texmf.cnf. I.e., not under YYYY. -% -% As a result, we cannot use actual brace expansion in the definition, -% since we don't want to scatter ../'s throughout the value. Hence we -% explicitly list every directory. Arguably more understandable anyway. -% -TEXMFCNF = {\ -$SELFAUTOLOC,\ -$SELFAUTOLOC/share/texmf-local/web2c,\ -$SELFAUTOLOC/share/texmf-dist/web2c,\ -$SELFAUTOLOC/share/texmf/web2c,\ -$SELFAUTOLOC/texmf-local/web2c,\ -$SELFAUTOLOC/texmf-dist/web2c,\ -$SELFAUTOLOC/texmf/web2c,\ -\ -$SELFAUTODIR,\ -$SELFAUTODIR/share/texmf-local/web2c,\ -$SELFAUTODIR/share/texmf-dist/web2c,\ -$SELFAUTODIR/share/texmf/web2c,\ -$SELFAUTODIR/texmf-local/web2c,\ -$SELFAUTODIR/texmf-dist/web2c,\ -$SELFAUTODIR/texmf/web2c,\ -\ -$SELFAUTOPARENT/../texmf-local/web2c,\ -$SELFAUTOPARENT,\ -\ -$SELFAUTOPARENT/share/texmf-local/web2c,\ -$SELFAUTOPARENT/share/texmf-dist/web2c,\ -$SELFAUTOPARENT/share/texmf/web2c,\ -$SELFAUTOPARENT/texmf-local/web2c,\ -$SELFAUTOPARENT/texmf-dist/web2c,\ -$SELFAUTOPARENT/texmf/web2c\ -} -% -% For reference, here is the old brace-using definition: -%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c} - -% kpathsea 3.5.3 and later sets these at runtime. To avoid empty -% expansions from binaries linked against an earlier version of the -% library, we set $progname and $engine to something non-empty: -progname = unsetprogname -engine = unsetengine - - -% Part 2: Options. - -% If this option is set to true, `tex a.b' will look first for a.b.tex -% (within each path element), and then for a.b, i.e., we try standard -% extensions first. If this is false, we first look for a.b and then -% a.b.tex, i.e., we try the name as-is first. -% -% Both names are always tried; the difference is the order in which they -% are tried. The setting applies to all searches, not just .tex. -% -% This setting only affects names being looked up which *already* have -% an extension. A name without an extension (e.g., `tex story') will -% always have an extension added first. -% -% The default is true, because we already avoid adding the standard -% extension(s) in the usual cases. E.g., babel.sty will only look for -% babel.sty, not babel.sty.tex, regardless of this setting. -try_std_extension_first = t - -% Enable system commands via \write18{...}. When enabled fully (set to -% t), obviously insecure. When enabled partially (set to p), only the -% commands listed in shell_escape_commands are allowed. Although this -% is not fully secure either, it is much better, and so useful that we -% enable it for everything but bare tex. -shell_escape = p - -% No spaces in this command list. -% -% The programs listed here are as safe as any we know: they either do -% not write any output files, respect openout_any, or have hard-coded -% restrictions similar or higher to openout_any=p. They also have no -% features to invoke arbitrary other programs, and no known exploitable -% bugs. All to the best of our knowledge. They also have practical use -% for being called from TeX. -% -shell_escape_commands = \ -bibtex,bibtex8,\ -kpsewhich,\ -makeindex,\ -mpost,\ -repstopdf,\ - -% we'd like to allow: -% dvips - but external commands can be executed, need at least -R1. -% epspdf, ps2pdf, pstopdf - need to respect openout_any, -% and gs -dSAFER must be used and check for shell injection with filenames. -% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides, -% without Unix convert it hardly seems worth it, and Windows convert -% is something completely different that destroys filesystems, so skip. -% pygmentize - but is the filter feature insecure? -% ps4pdf - but it calls an unrestricted latex. -% rpdfcrop - maybe ok, but let's get experience with repstopdf first. -% texindy,xindy - but is the module feature insecure? -% ulqda - but requires optional SHA1.pm, so why bother. -% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any. - -% plain TeX should remain unenhanced. -shell_escape.tex = f -shell_escape.initex = f - -% This is used by the Windows script wrapper for restricting searching -% for the purportedly safe shell_escape_commands above to system -% directories. -TEXMF_RESTRICTED_SCRIPTS = \ - {!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}// - -% Allow TeX \openin, \openout, or \input on filenames starting with `.' -% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)? -% a (any) : any file can be opened. -% r (restricted) : disallow opening "dotfiles". -% p (paranoid) : as `r' and disallow going to parent directories, and -% restrict absolute paths to be under $TEXMFOUTPUT. -openout_any = p -openin_any = a - -% Write .log/.dvi/etc. files here, if the current directory is unwritable. -%TEXMFOUTPUT = /tmp - -% If a dynamic file creation fails, log the command to this file, in -% either the current directory or TEXMFOUTPUT. Set to the -% empty string or 0 to avoid logging. -MISSFONT_LOG = missfont.log - -% Set to a colon-separated list of words specifying warnings to suppress. -% To suppress everything, use TEX_HUSH = all; this is currently equivalent to -% TEX_HUSH = checksum:lostchar:readable:special -% To suppress nothing, use TEX_HUSH = none or do not set the variable at all. -TEX_HUSH = none - -% Allow TeX, and MF to parse the first line of an input file for -% the %&format construct. -parse_first_line = t - -% But don't parse the first line if invoked as "tex", since we want that -% to remain Knuth-compatible. The src_specials and -% file_line_error_style settings, as well as the options -enctex, -% -mltex, -8bit, etc., also affect this, but they are all off by default. -parse_first_line.tex = f -parse_first_line.initex = f - -% Control file:line:error style messages. -file_line_error_style = f - -% Enable the mktex... scripts by default? These must be set to 0 or 1. -% Particular programs can and do override these settings, for example -% dvips's -M option. Your first chance to specify whether the scripts -% are invoked by default is at configure time. -% -% These values are ignored if the script names are changed; e.g., if you -% set DVIPSMAKEPK to `foo', what counts is the value of the environment -% variable/config value `FOO', not the `MKTEXPK' value. -% -%MKTEXTEX = 0 -%MKTEXPK = 0 -%MKTEXMF = 0 -%MKTEXTFM = 0 -%MKTEXFMT = 0 -%MKOCP = 0 -%MKOFM = 0 - -% Used by makempx to run TeX. We use "etex" because MetaPost is -% expecting DVI, and not "tex" because we want first line parsing. -TEX = etex - -% These variables specify the external program called for the -% interactive `e' option. %d is replaced by the line number and %s by -% the current filename. The default is specified at compile-time, and -% we let that stay in place since different platforms like different values. -%TEXEDIT = vi +%d '%s' % default for Unix -%TEXEDIT = texworks --position=+%d "%s" % default for Windows -%MFEDIT = ${TEXEDIT} -%MPEDIT = ${TEXEDIT} - -% The default `codepage and sort order' file for BibTeX8, when none is -% given as command line option or environment variable. -BIBTEX_CSFILE = 88591lat.csf - -% This variable is specific to Windows. It must be set to 0 or 1. The -% default is 0. Setting it to 1 tells the Windows script wrappers to -% use an already installed Perl interpreter if one is found on the -% search path, in preference to the Perl shipped with TeX Live. Thus, -% it may be useful if you both (a) installed a full Perl distribution -% for general use, and (b) need to run Perl programs from TL that use -% additional modules we don't provide. The TL Perl does provide all the -% standard Perl modules. -% -%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0 - - -% Part 3: Array and other sizes for TeX (and Metafont). -% -% If you want to change some of these sizes only for a certain TeX -% variant, the usual dot notation works, e.g., -% main_memory.hugetex = 20000000 -% -% If a change here appears to be ignored, try redumping the format file. - -% Memory. Must be less than 8,000,000 total. -% -% main_memory is relevant only to initex, extra_mem_* only to non-ini. -% Thus, have to redump the .fmt file after changing main_memory; to add -% to existing fmt files, increase extra_mem_*. (To get an idea of how -% much, try \tracingstats=2 in your TeX source file; -% web2c/tests/memtest.tex might also be interesting.) -% -% To increase space for boxes (as might be needed by, e.g., PiCTeX), -% increase extra_mem_bot. -% -% For some xy-pic samples, you may need as much as 700000 words of memory. -% For the vast majority of documents, 60000 or less will do. -% -main_memory = 5000000 % words of inimemory available; also applies to inimf&mp -extra_mem_top = 0 % extra high memory for chars, tokens, etc. -extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc. - -% ConTeXt needs lots of memory. -extra_mem_top.context = 2000000 -extra_mem_bot.context = 4000000 - -% Words of font info for TeX (total size of all TFM files, approximately). -% Must be >= 20000 and <= 147483647 (without tex.ch changes). -font_mem_size = 8000000 - -% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes). -font_max = 9000 - -% Extra space for the hash table of control sequences. -hash_extra = 600000 - -% Max number of characters in all strings, including all error messages, -% help texts, font names, control sequences. These values apply to TeX. -pool_size = 6250000 -% Minimum pool space after TeX's own strings; must be at least -% 25000 less than pool_size, but doesn't need to be nearly that large. -string_vacancies = 90000 -% Maximum number of strings. -max_strings = 500000 -% min pool space left after loading .fmt -pool_free = 47500 - -% Buffer size. TeX uses the buffer to contain input lines, but macro -% expansion works by writing material into the buffer and reparsing the -% line. As a consequence, certain constructs require the buffer to be -% very large, even though most documents can be handled with a small value. -buf_size = 200000 - -% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in -% the sources), but we don't need that much. The value here suffices -% for all known free hyphenation patterns to be loaded simultaneously -% (as TeX Live does). -% -trie_size = 1000000 - -hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767. - % http://primes.utm.edu/curios/page.php/8191.html -nest_size = 500 % simultaneous semantic levels (e.g., groups) -max_in_open = 15 % simultaneous input files and error insertions, - % also applies to MetaPost -param_size = 10000 % simultaneous macro parameters, also applies to MP -save_size = 100000 % for saving values outside current group -stack_size = 5000 % simultaneous input sources - -% These are Omega-specific. -ocp_buf_size = 500000 % character buffers for ocp filters. -ocp_stack_size = 10000 % stacks for ocp computations. -ocp_list_size = 1000 % control for multiple ocps. - -% These work best if they are the same as the I/O buffer size, but it -% doesn't matter much. Must be a multiple of 8. -dvi_buf_size = 16384 % TeX -gf_buf_size = 16384 % MF - -% It's probably inadvisable to change these. At any rate, we must have: -% 45 < error_line < 255; -% 30 < half_error_line < error_line - 15; -% 60 <= max_print_line; -% These apply to TeX, Metafont, and MetaPost. -error_line = 79 -half_error_line = 50 -max_print_line = 79 - -% Metafont only. -screen_width.mf = 1664 -screen_depth.mf = 1200 - -% BibTeX only (max_strings also determines hash_size and hash_prime). -ent_str_size = 250 -glob_str_size = 20000 -max_strings.bibtex = 35307 -max_strings.bibtex8 = 35307 -max_strings.bibtexu = 35307 -max_strings.pbibtex = 35307 - -% GFtype only. -line_length.gftype = 500 -max_rows.gftype = 8191 -max_cols.gftype = 8191 diff --git a/libre/texlive-core-libre/texmfcnf.lua b/libre/texlive-core-libre/texmfcnf.lua deleted file mode 100644 index 4409692be..000000000 --- a/libre/texlive-core-libre/texmfcnf.lua +++ /dev/null @@ -1,190 +0,0 @@ --- public domain - --- ConTeXt needs a properly expanded TEXMFLOCAL, so here is a --- bit of lua code to make that happen - -local texmflocal = resolvers.prefixes.selfautoparent(); -texmflocal = string.gsub(texmflocal, "20%d%d$", "texmf-local"); - -return { - - type = "configuration", - version = "1.1.0", - date = "2012-05-24", - time = "12:12:12", - comment = "ConTeXt MkIV configuration file", - author = "Hans Hagen, PRAGMA-ADE, Hasselt NL", - - content = { - - -- Originally there was support for engines and progname but I don't expect - -- other engines to use this file, so first engines were removed. After that - -- if made sense also to get rid of progname. At some point specific formats - -- will be supported but then as a subtable with fallbacks, which sounds more - -- natural. Also, at some point the paths will become tables. For the moment - -- I don't care too much about it as extending is easy. - - variables = { - - -- The following variable is predefined (but can be overloaded) and in - -- most cases you can leve this one untouched. The built-in definition - -- permits relocation of the tree. - -- - -- TEXMFCNF = "{selfautodir:,selfautoparent:}{,{/share,}/texmf{-local,}/web2c}" - -- - -- more readable than "selfautoparent:{/texmf{-local,}{,/web2c},}}" is: - -- - -- TEXMFCNF = { - -- "selfautoparent:/texmf-local", - -- "selfautoparent:/texmf-local/web2c", - -- "selfautoparent:/texmf-dist", - -- "selfautoparent:/texmf/web2c", - -- "selfautoparent:", - -- } - - -- only used for FONTCONFIG_PATH & TEXMFCACHE in TeX Live - - TEXMFSYSVAR = "/var/lib/texmf", - TEXMFVAR = "home:.texlive/texmf-var", - - -- We have only one cache path but there can be more. The first writable one - -- will be chosen but there can be more readable paths. - - TEXMFCACHE = "$TEXMFSYSVAR;$TEXMFVAR", - TEXMFCONFIG = "home:.texlive/texmf-config", - - -- I don't like this texmf under home and texmf-home would make more - -- sense. One never knows what installers put under texmf anywhere and - -- sorting out problems will be a pain. But on the other hand ... home - -- mess is normally under the users own responsibility. - -- - -- By using prefixes we don't get expanded paths in the cache __path__ - -- entry. This makes the tex root relocatable. - - TEXMFOS = "selfautodir:share", - TEXMFDIST = "selfautodir:share/texmf-dist", - - TEXMFLOCAL = texmflocal, - TEXMFSYSCONFIG = "/etc/texmf", - TEXMFFONTS = "selfautoparent:texmf-fonts", - TEXMFPROJECT = "selfautoparent:texmf-project", - - TEXMFHOME = "home:texmf", - -- TEXMFHOME = os.name == "macosx" and "home:Library/texmf" or "home:texmf", - - -- We need texmfos for a few rare files but as I have a few more bin trees - -- a hack is needed. Maybe other users also have texmf-platform-new trees. - - TEXMF = "{$TEXMFCONFIG,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFPROJECT,!!$TEXMFFONTS,!!$TEXMFLOCAL,!!$TEXMFDIST}", - - TEXFONTMAPS = ".;$TEXMF/fonts/data//;$TEXMF/fonts/map/{pdftex,dvips}//", - ENCFONTS = ".;$TEXMF/fonts/data//;$TEXMF/fonts/enc/{dvips,pdftex}//", - VFFONTS = ".;$TEXMF/fonts/{data,vf}//", - TFMFONTS = ".;$TEXMF/fonts/{data,tfm}//", - T1FONTS = ".;$TEXMF/fonts/{data,type1}//;$OSFONTDIR", - AFMFONTS = ".;$TEXMF/fonts/{data,afm}//;$OSFONTDIR", - TTFONTS = ".;$TEXMF/fonts/{data,truetype}//;$OSFONTDIR", - OPENTYPEFONTS = ".;$TEXMF/fonts/{data,opentype}//;$OSFONTDIR", - CMAPFONTS = ".;$TEXMF/fonts/cmap//", - FONTFEATURES = ".;$TEXMF/fonts/{data,fea}//;$OPENTYPEFONTS;$TTFONTS;$T1FONTS;$AFMFONTS", - FONTCIDMAPS = ".;$TEXMF/fonts/{data,cid}//", - OFMFONTS = ".;$TEXMF/fonts/{data,ofm,tfm}//", - OVFFONTS = ".;$TEXMF/fonts/{data,ovf,vf}//", - - TEXINPUTS = ".;$TEXMF/tex/{context,plain/base,generic}//", - MPINPUTS = ".;$TEXMF/metapost/{context,base,}//", - - -- In the next variable the inputs path will go away. - - TEXMFSCRIPTS = ".;$TEXMF/scripts/context/{lua,ruby,python,perl}//;$TEXINPUTS", - PERLINPUTS = ".;$TEXMF/scripts/context/perl", - PYTHONINPUTS = ".;$TEXMF/scripts/context/python", - RUBYINPUTS = ".;$TEXMF/scripts/context/ruby", - LUAINPUTS = ".;$TEXINPUTS;$TEXMF/scripts/context/lua//", - CLUAINPUTS = ".;$SELFAUTOLOC/lib/{context,luatex,}/lua//", - - -- Not really used by MkIV so they might go away. - - BIBINPUTS = ".;$TEXMF/bibtex/bib//", - BSTINPUTS = ".;$TEXMF/bibtex/bst//", - - -- Experimental - - ICCPROFILES = ".;$TEXMF/tex/context/colors/{icc,profiles}//;$OSCOLORDIR", - - -- A few special ones that will change some day. - - FONTCONFIG_FILE = "fonts.conf", - FONTCONFIG_PATH = "$TEXMFSYSVAR/fonts/conf", - - }, - - -- We have a few reserved subtables. These control runtime behaviour. The - -- keys have names like 'foo.bar' which means that you have to use keys - -- like ['foo.bar'] so for convenience we also support 'foo_bar'. - - directives = { - - -- There are a few variables that determine the engines - -- limits. Most will fade away when we close in on version 1. - - ["luatex.expanddepth"] = "10000", -- 10000 - ["luatex.hashextra"] = "100000", -- 0 - ["luatex.nestsize"] = "1000", -- 50 - ["luatex.maxinopen"] = "500", -- 15 - ["luatex.maxprintline"] = " 10000", -- 79 - ["luatex.maxstrings"] = "500000", -- 15000 -- obsolete - ["luatex.paramsize"] = "25000", -- 60 - ["luatex.savesize"] = "50000", -- 4000 - ["luatex.stacksize"] = "10000", -- 300 - - -- A few process related variables come next. - - -- ["system.checkglobals"] = "10", - -- ["system.nostatistics"] = "yes", - ["system.errorcontext"] = "10", - ["system.compile.cleanup"] = "no", -- remove tma files - ["system.compile.strip"] = "yes", -- strip tmc files - - -- The io modes are similar to the traditional ones. Possible values - -- are all, paranoid and restricted. - - ["system.outputmode"] = "restricted", - ["system.inputmode"] = "any", - - -- The following variable is under consideration. We do have protection - -- mechanims but it's not enabled by default. - - ["system.commandmode"] = "any", -- any none list - ["system.commandlist"] = "mtxrun, convert, inkscape, gs, imagemagick, curl, bibtex, pstoedit", - - -- The mplib library support mechanisms have their own - -- configuration. Normally these variables can be left as - -- they are. - - ["mplib.texerrors"] = "yes", - - -- Normally you can leave the font related directives untouched - -- as they only make sense when testing. - - -- ["fonts.autoreload"] = "no", - -- ["fonts.otf.loader.method"] = "table", -- table mixed sparse - -- ["fonts.otf.loader.cleanup"] = "0", -- 0 1 2 3 - - -- In an edit cycle it can be handy to launch an editor. The - -- preferred one can be set here. - - -- ["pdfview.method"] = "okular", -- default (often acrobat) xpdf okular - - }, - - experiments = { - ["fonts.autorscale"] = "yes", - }, - - trackers = { - }, - - }, - -} -- cgit v1.2.3-54-g00ecf