summaryrefslogtreecommitdiff
path: root/cron-jobs/sourceballs
AgeCommit message (Collapse)Author
2016-04-17Backport changes from the lukeshu/xbs branch.Luke Shumaker
Notable, remove the files.db stuff that became extraneous with pacman 5.
2015-06-05Use XBS instead of the SVN/ABS grossness.Luke Shumaker
* config: drop SVNREPO * cron-jobs/sourceballs: Replace commented out SVN code and active ABS code with XBS code. The XBS code is fairly similar to the SVN code, the difference being that it uses `xbs releasepath` instead of `svn export`. * db-functions: - Rename check_pkgsvn to check_pkgxbs - check_pkgxbs: Drop the `svn export` bit, as `xbs releasepath` assumes that a working directory already exists. Replace the paths created by the `svn export` with calls to `xbs releasepath`. - check_splitpkgs: Drop the ABS `cp` -r bit, as `xbs releasepath` assumes that a working directory already exists. Replace the paths created by the `cp -r` with calls to `xbs releasepath`. Rename the variables and temporary files s/svn/xbs/ . * db-move: - First loop: Rename the variable svnrepo_from to xbsrepo_from, and get the value from `xbs releasepath`. - Second loop: Run `xbs move` before the inner loop to get a list of architectures. Rename the variable `svnrepo_from` to `xbsrepo_to`, and get the value for it from `xbs releasepath`. Because xbs guarantees that the PKGBUILD exists for the architectures listed, replace the check for whether the PKGBUILD exists with `if true`, to keep merging easy (as opposed to removing the if, and de-indenting the whole thing). * db-remove: Get the location of the PKGBUILD from `xbs releasepath`, call `xbs unrelease`, and adjust a message to use `xbs name` and mention the appropriate repo/arch pair.
2014-06-18sourceballs: Only show makepkg output on errors.Luke Shumaker
Also, set SRCPKGDEST.
2014-06-18sourceballs: (from Arch): create the workdir with mode 0770Luke Shumaker
2014-06-18use mv_aclLuke Shumaker
2014-06-18Use printf formatters instead of string interpolation.Luke Shumaker
I used this command to find them: egrep -r --exclude-dir={test,.git} '(plain|msg|msg2|warning|error|stat_busy|stat_done|abort|die)\s+"?[^"]*\$'
2014-06-18Clean up quoting.Luke Shumaker
2014-01-08Fix some array quoting.Luke Shumaker
2014-01-08Normalize to load config then local_config then db-functionsLuke Shumaker
2014-01-08fix comments, indentationLuke Shumaker
2014-01-08Get rid of $ARCH_BASE; these days it is the same as $FTP_BASELuke Shumaker
2014-01-08Be very careful about using $0.Luke Shumaker
2011-02-20Merge branch 'master' of http://projects.parabolagnulinux.org/dbscriptsParabola
Conflicts: db-functions
2011-02-20sourceballsParabola
2011-02-20Changes to sourceball everythingNicolás Reynolds
2011-02-18First stab at sourceballing everythingNicolás Reynolds
2011-01-30Make sure to only remove package files from the cleanup dirsPierre Schmitz
2010-12-18Remove old files from the cleanup dirsPierre Schmitz
2010-12-18Touch old packages after moving them to the cleanup dirsPierre Schmitz
This updates the mtime of those files and will help us to remove them later.
2010-11-25sourceballs: be nicePierre Schmitz
2010-11-25Added seperate dryrun options for the packages and sources cleanup scriptsEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-11-24sourceballs: fix working directoryPierre Schmitz
2010-11-23sourceballs: Move to our workdir first to fix warning with sudo usagePierre Schmitz
2010-11-23sourceballs: avoid failing twicePierre Schmitz
2010-11-23sourceballs: fix outputPierre Schmitz
2010-11-23sourceballs: be less verbosePierre Schmitz
2010-11-23Rewrite sourceballs to increase performance and reliabilityPierre Schmitz
* Decrease file stats as much as possible * Create a list of all packages and meta data only once * Create a list of available source packages only once * Create a list of expected packages only once * Combine all three scripts into one to share data and code * Use as much information from the db files as possible and avoid using svn * Avoid attempting to create the same source package twice Logic works as follows: 1) create a list of all packages 2) Check for each package if we need a src package and create one 3) During this process create a list of all src packages that should be there 4) Diff both lists for the cleanup
2010-11-21sourceballs: Of course sort does only operate on linesPierre Schmitz
2010-11-21sourceballs: Don't write any logPierre Schmitz
This is consistent with the other dbscripts. The output will be send to the mailinglist.
2010-11-20sourceballs: Lock the repo while reading the db filePierre Schmitz
2010-11-20Simplify sourceballs creationPierre Schmitz
* Read package lists directly from DB file * Make SVNREPO configurable
2010-11-20Fix sourceballs cron jobPierre Schmitz
* add unit test for sourceballs and cleanup * introduce SRCPOOL and LOGDIR variables in config
2010-09-13Fix typosPierre Schmitz
2010-09-01Simplify repo configurationPierre Schmitz
* Repositories can now be defined in the config file for each host * added community-staging, gnome-unstable and kde-unstable * Exception is the adjust-permission cron-job; but we might want to use acls in future anyway Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-08-22add makepkg.conf for [multilib]Pierre Schmitz
2010-08-17Add [staging] repositoryPierre Schmitz
2010-08-13Use common functions to print messages, warnings and errorsPierre Schmitz
These functions are copied from makepkg
2010-08-08Use db-functions in create-filelists and sourceballsPierre Schmitz
2010-06-28sourceballs: Added community and community-testing supportEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-03-13sourceballs: Make cleanup more efficientEric Bélanger
Moved all cleanup related code in sourceballs-cleanup script and moved, now common, functions in db-functions. The cleanup script is now ran after all the new sourceballs have been fetched. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
2009-09-25sourceballs: skip based on pkgbase failuresAaron Griffin
If one portion of a split package fails, assume that all packages from the same $pkgbase are going to fail as well and skip them for this run. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-24Fixed test for existence of split package sourcesAaron Griffin
This patch also removes the unused CARCH variable. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> [Aaron: Broke srcpkgbase logic into srcpkgname/srcpkgbase to make it more readable] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-21Add a safety check for existence in pkg loopAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-21Set/restore umask in the sourceballs cron jobAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-21Temporarily disable community sourceball generationAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-13Be more careful with config file inclusionDan McGee
We can't really do the basedir magic from db-functions as it is just being sourced and is not the currently executing script. Although a bit repetitive, it is a lot safer to just include the config file everywhere. Noticed this when trying to run the latest available scripts on sigurd. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-01sourceballs: explicitly add the 'any' archAaron Griffin
Loop over all arches AND the 'any' arch. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-18Replace pkgname with pkgbase, for split packagesAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-18Use db-functions file everywhereAaron Griffin
This source the config file and gets us functions such as getpkgname which were duplicated elsewhere Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-18More makepkg.conf removal - prefer toplevel configAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-17 05:30:48 +0000