summaryrefslogtreecommitdiff
path: root/db-update
AgeCommit message (Collapse)Author
2011-04-02Add signature files to update/move/remove targetsRémy Oudompheng
Signature files are optional and the previous behaviour is unchanged when signatures files do not exist. Signed-off-by: Rémy Oudompheng <remy@archlinux.org> Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2011-01-15Move repo manipulation code into common functionsPierre Schmitz
repo-add and repo-remove is now indirectly called by arch_repo_add/remove. This simplifies future extensions like incremental file list creations. See FS#11302
2010-12-02db-update: Fail if a set of split packages is incompletePierre Schmitz
2010-09-11Use local config instead of guessing by hostnamePierre Schmitz
Using the hostname to decide which repos to use is not releiable and hard to test. Instead use config.local to configure these. config files for sigurd and gerolde were added which can be copied or symlinked to config.local on the specific host.
2010-09-05Check if package exists in any other repository on updatePierre Schmitz
This also checks if the sam package exists within the old package layout (without package pool)
2010-09-02Set correct group after touching the db filePierre Schmitz
* When writing the db file ensure that it has write permission of the group which owns the parent directory. * This should make the adjust-permissions cron job obsolete.
2010-08-24db-update: Make sure there are no links in the staging directoryPierre Schmitz
2010-08-17Add additional checks when reading PKGBUILDsPierre Schmitz
If reading from a PKGBUILD fails stop immediatly. Also put out more usefull error messages.
2010-08-17minor fix to error messageAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-08-17Don't try to update no packagePierre Schmitz
Check if there are packages to update for given architecure. Previously db-update quit when only one arch of a package was available.
2010-08-15Lock repos before checkingPierre Schmitz
2010-08-15Use common names for reposPierre Schmitz
2010-08-14Rewrite of db-updatePierre Schmitz
* db-update now updates all repos with packages in its staging dirs * sanity checks are performed before any repo is touched * improved performance * less code; easier to maintain
2010-08-13Simplify check for existing packagesPierre Schmitz
2010-08-13removed useless statementsPierre Schmitz
2010-08-13Remove check which was already covered by check_repo_permissionPierre Schmitz
2010-08-13Abort if package already exists in repoPierre Schmitz
Don't try to be smart and remove packages from the staging dir without asking.
2010-08-13Use common functions to print messages, warnings and errorsPierre Schmitz
These functions are copied from makepkg
2010-08-13Check permission before any actionPierre Schmitz
Added a function to check if user has permission to alter the repos and db files.
2010-08-10Use more consitent naming for package poolPierre Schmitz
There are no longer architecture-specific subdirs and the structure was switch to this: ftp └── pool ├── community └── packages packages contains all packages from core, extra and testing; this naming is in sync with the svn repo naming: svn-packages and svn-community
2010-08-08Source PKGBUILD in subshellsPierre Schmitz
This patch sources a PKGBUILD in a subshells instead of directly. This way we don't polute our scope or overwrite our vars which might lead to unexpected behavior.
2010-08-08Move common function to db-functionsPierre Schmitz
db-functions now sets an individual $WORKDIR and implements trap functinos that remove locks on exit or error. There are new functions to lock and unlock the running script. misc-scripts/ftpdir-cleanup was renamed to ftpdir-cleanup-repo as the cron-job had the same name. Script names have to be unique when using db-functions.
2010-08-08use common workdirPierre Schmitz
2010-08-08Prepare for variable db file compressionPierre Schmitz
2010-08-08Remove BUILDSCRIPT variablePierre Schmitz
There is no need to have a variable for things like PKGBUILD that are very unlikely to ever change.
2010-08-08Remove check for old staging dirsPierre Schmitz
devtools take care of this anyway
2010-08-08Reduce verbosityPierre Schmitz
Only inform of errors and processes that might take longer.
2010-08-08Use package pool instead of $repo/os/any dirsPierre Schmitz
2010-06-29don't fail if any package already existsPierre Schmitz
2010-06-29don't mix db files of different archesPierre Schmitz
2010-06-20Replace PKGPOOL_DIR by a function callPierre Schmitz
The package pool dir depends on the host; so we solve this similar to get_repos_for_host() Note: There is no "os" subdir for the package pool.
2010-05-03Add PKGPOOL_DIR config variableAaron Griffin
This is a relative var, descendent from FTP_BASE. We do this because we also need a relative path to the package pool dir
2010-04-28db-update: Use a master package pool and symlinksAaron Griffin
This should save lots of transfer time with the mirrors :) Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2010-04-11Fail if lock couldn't be obtained; Unlock the repos if ftpdir-cleanup failsPierre Schmitz
2010-03-31fix permissions of incoming packagesAndrea Scarpino
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-03-31don't publish *.old filesPierre Schmitz
2010-02-21Accept any *.pkg.tar.* package file namePierre Schmitz
With this patch packages with different compressions are accepted. It is ensured that one cannot have the same package with different compression extensions. The new functions getpkgfile{,s} are used to sanitize globed filenames. Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2009-09-18Collapse duplicate loops for staging removalAaron Griffin
Add 'any' to the items looped over in the ${ARCHES[@]} loop Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-18Remove pkg from $stagedir if already in FTP repoFrancois Charette
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-13Ensure you don't update DBs on the wrong serverDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-13Be more careful with config file inclusionDan McGee
We can't really do the basedir magic from db-functions as it is just being sourced and is not the currently executing script. Although a bit repetitive, it is a lot safer to just include the config file everywhere. Noticed this when trying to run the latest available scripts on sigurd. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-17Remove dependence on makepkg.confAaron Griffin
Removed the need for makepkg.conf * Killed off CARCH * Added PKGEXT to the config file * Remove source_makepkg function * Source config file where makepkg.conf was needed Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-17Replace DB_COMPRESSION with DBEXT in the configAaron Griffin
DBEXT contains the full extension for the db files (.db.tar.gz) and is recorded in the config file Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-08-16Add DB_COMPRESSION var to all scripts that need itDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-22remove support for different svn reposPierre Schmitz
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-21db-update: Move some steps inside an 'if'Francois Charette
[Aaron: keep WORKDIR creation outside the loop, as its removed at the end] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-21db-update: Fix final repo_unlockAaron Griffin
Because we lock/unlock in a loop, simply remove the cleanup trap at the end of the process, and manually clean up the work dir Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-21remove trailing slash from ftppath[_any]Francois Charette
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20any support: use relative symlinksAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20Minor syntactic improvements in db-updateFrancois Charette
* also added error msg for repo_lock in db-functions [Aaron: keep quotes around $WORKDIR] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>