summaryrefslogtreecommitdiff
path: root/devel/management
AgeCommit message (Collapse)Author
2011-11-30Allow generation of an ownertrust fileDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Integrate master key into rest of siteDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30reporead: split out filesonly update methodDan McGee
This removes a bunch of the conditional logic at a slight cost of some code duplication. However, the methods and madness is now much easier to follow. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30reporead: fix filesonly needs update checksDan McGee
This was broken after the select for update changes. We really should split the whole filesonly update into another method instead of the current shotgun approach with conditionals everywhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-17reporead: don't trim pkgdesc lengthDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-17Ensure reporead is protected against simultaneous runsDan McGee
This adds a bunch of transaction magic and SELECT FOR UPDATE stuff to reporead to cope with the now-concurrent runs of reporead we get when invoked from our inotify-based updater. The collision occurs with 'any' architecture packages as both repo databases contain the new version, and the updates occur at exactly the same time. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-17reporead_inotify: nice the spawned subprocessesDan McGee
This prevents the reporead job from taking over time from more important processes; this is not a rush task. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16reporead_inotify: close connection once we are done with itDan McGee
This prevents an otherwise idle connection from sitting around and being totally useless. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16reporead_inotify: spin up read_repo() in separate threadDan McGee
This prevents memory usage from ballooning to absolutely huge values, such as when multiple threads kick off at the same time. The bulk of our memory allocation obviously comes in these threads and not the main threads, so being able to isolate them in processes helps a lot. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16reporead: a few small tweaksDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15reporead: clean up some debug loggingDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15reporead_inotify: cancel threads that haven't started yet on shutdownDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Add new reporead_inotify management commandDan McGee
This is the new on-the-fly updates hotness. Rather than continue to schedule reporead to run once an hour in cron or however else you ran it, this command can be run once and left running, and will automagically pick up on any database file changes and run an import. It operates on the files databases only; this will keep both the packages and files always in sync and remove the delay in updating, especially helpful for new testing packages. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Improve primary arch validationDan McGee
Ensure we can accept either a Arch object or an architecture name when passed to read_repo() by moving the validation there and being a bit more careful about typechecking and object lookup. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Really ensure we don't catch any NULL or blank valuesDan McGee
Fuck you too, Django. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Ensure PGP signature values are not trimmedDan McGee
This makes them totally unusable for any real purpose down the road. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Add a generate_keyring commandDan McGee
This grabs all the PGP keys from the developer profiles and adds them to the keyrings. Obviously we may want to do more in the future such as filter by groups, active status, etc. but this is just a first iteration. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-17Add PGP signature package fieldDan McGee
And add eventual display code for it to the details template, but don't show it yet as no packages will have it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-16Add two new DB fields to reporeadDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-23Add a rematch_packager management commandDan McGee
This allows quick resolution of all unmatched packages, especially after tweaking the way find_user works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-23Turn find_user into UserFinder classDan McGee
This moves the cache inside an instance. Also add a few more tests. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-23Move find_user method to devel utilsDan McGee
This could be handy elsewhere as well, and it is loosely coupled to anything else in reporead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14reporead: small memory/perf improvementsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14reporead: two small cleanupsDan McGee
* Parse builddate when reading from repo database file * Use defaultdict where it comes in handy Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Fix busted batch score on package removalDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09reporead: allow batching of package updatesDan McGee
The real reason I originally added transactions to this code was to prevent half-updates; e.g. a package gets in without the matching depends values. We can safely commit between packages and resume processing the database at a later time. Take advantage of this fact and commit every so often in batch fashion if we have a lot of updates piling up. In the case of updating the files DB, this can really cut down on the need to hold open a long-running, statement heavy transaction and get the information public faster. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Management command cleanupDan McGee
Now that we aren't seeing odd segfaults and hung tasks, we can remove the traceback stuff from the scripts. Also use the 'io' module only, it has been long enough. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-07Use UTC datetime objects everywhereDan McGee
Rather than the twisted mix of local times and UTC times we currently have. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-24Add provides to collections listrelease_2011-03-28Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23reporead: remove the need for hasattr() checksDan McGee
Ensure all our multivalued attributes already exist on the object beforehand, and add some special sauce to handle the difference between a package without files and a database without files entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Clear out package relation sets before adding new valuesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23reporead: read in provisions, conflicts, and replacementsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Remove need to import each individual logger constantDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23reporead: refactor multivalued attribute creationDan McGee
This will come in more handy with our new models, but we can adapt groups and licenses to use it first. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-22Don't bail on staging repo being short on packagesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-16Various reporead small cleanupsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-13Add package epoch supportDan McGee
This comes with pacman 3.5, replacing the old "force" PKGBUILD option. We parse it and store it for now, but don't display it anywhere just yet. Also update a few queries relying on version differences in any of the multiple parts. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-27reporead: small cleanupsDan McGee
2011-02-23reporead performance improvementsDan McGee
When importing over a million files, it makes sense to take the slightly faster route and call the PackageFile() constructor directly rather than going through the related manager's create method. We can also get huge performance improvements, especially with files databases, by using the 'io' rather than 'codecs' module. The former is now implemented in C in 2.7 and results in a no-work import (so measuring only the DB read speed) of extra.files.tar.gz from ~30 seconds to ~5 seconds. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-22Use new split package file fields everywhereDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-16Read in optional deps and show in web interfaceDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-15Move license to a related modelDan McGee
This allows us to store multiple licenses per package in a more elegant fashion, and will later allow us to search and filter on this information. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-15Clean up Package related objects codeDan McGee
Main change is just to move groups from the default packagegroup_set location to a related_name of groups. Also refer to the Package class directly rather than by text string if we have it available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Defer format string substitution to loggerDan McGee
Don't use 'fmtstr % (arg1, arg2)' type format; logger can be passed a format string and the arguments to populate it. Saves a bit of work for strings that never end up getting displayed anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Commit during reporead on a per-arch basisDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-27Remove print statementDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-04reporead: fix small issues when loading files databasesrelease_2010-11-04Dan McGee
We didn't verify that the version in the files database was the same as in the SQL side of things, so we could load old files for a new package and lose track of this fact. When loading files, ensure the database version matches the version in the package before continuing with the file load operation. There are also a few other small updates in here, like skipping the sanity check for filesonly as we never delete packages, and removing some unnecessary string concatenation operations. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-04reporead: Use transparent compression on openDan McGee
And make filename check more lenient. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-04reporead: orphaning code cleanup and debug removalDan McGee
Cleanup to some of the orphan code cleanup, especially so we are never lying in the percentage we print, and remove a bunch of debug prints that aren't all that useful. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-04Make user profile a OneToOneFieldrelease_2010-10-05Dan McGee
We had this set up as a unique ForeignKey before, which adds some indirection due to the RelatedManager object being there. By making it a OneToOneField, we can get the profile object directly, enforce uniqueness, and also use it in select_related() calls to make our profiles page a bit more efficient. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-10-30 00:17:17 +0000