summaryrefslogtreecommitdiff
path: root/mirrors
AgeCommit message (Collapse)Author
2013-06-01Guard logging operation to prevent needless text joinDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-06-01Ensure only active mirror URLs are listedDan McGee
This fixes things up on the download page as well as the individual mirror details page. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-05-31Whoops, committed a little bit too muchrelease_2013-05-31Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-05-31Honor mirror URL active attribute in several placesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-05-31Add active column to mirror URLsDan McGee
2013-05-21Begin removal of FTP mirror supportDan McGee
FTP is a terrible protocol these days compared to HTTP. IPv6 support is spotty at best, it is much slower for the connect/begin transfer cycle, and overall just doesn't provide anything HTTP does better. Start killing bits that we've added to treat FTP as a first-class protocol and regulate it to the back seat. The expectation here is once this commit goes live to the production site, the FTP mirror URLs themselves will get removed completely from the database, and the FTP protocol object itself will get deleted. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-05-10Add mirror error logs to mirror details pageDan McGee
Give a window of 7 days for logs here rather than the default 24 hours we do on the main status page since we are only retrieving details for a single mirror with a handful of URLs. This should make it easier to have all information regarding one mirror in a single location. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-20Fix some None issues with sqlite3 and mirror statusDan McGee
If certain attributes came back from the database as NULL, we had issues parsing them. Pass None/NULL straight through rather than trying to type-convert. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-16Various minor code cleanups and fixesrelease_2013-04-16Dan McGee
Most of these were suggested by PyCharm, and include everything from little syntax issues and other bad smells to dead or bad code. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-16Remove COUNTRY_LOOKUP global variableDan McGee
This is only used in one place, so it makes more sense for it to not be globally accessible. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-14Tweaks to mirror status chart generationrelease_2013-04-14Dan McGee
* Use 'jQuery' rather than '$' * Use same colors for URLs in every chart for clarity Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-14Draw one mirror status graph per check locationDan McGee
Rather than lump it all together and have odd spikes depending on which side of the Atlantic checked a mirror in a given timeslot, draw a chart per check location. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-14Add a JSON view for retrieving mirror check locationsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-14Remove cache_function decorator from a few spotsDan McGee
The benefit of these storage operations might be outweighed by the cost, especially given how infrequently these functions are called. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-14Reduce mirror status query madnessDan McGee
Move completely to custom SQL for this logic. The Django ORM just doesn't play nice with the kind of query we are looking to do, so it is easier to do using raw SQL. The biggest pain factor here is in supporting sqlite as it doesn't have nearly the capabilities in handling datetime types directly in the database, as well as having some different type conversion necessities. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-13Support only a single mirror ID in error/status retrievalDan McGee
This simplifies things and makes injecting this single mirror ID into custom SQL a whole lot easier. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-13Calculate average URL delay in the databaseDan McGee
Rather than doing this in the Python code and needing 12,000+ rows returned from the database, we can do it in the database and get fewer than 300 rows back. If I recall correctly, the reason this was not done originally was due to our usage of MySQL and some really bad date math/overflow stuff it did when the interval between last_sync and check_time were greater than about a week. Luckily, we have switched to using a more sane database. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-04-10Allow mirror rsync IPs to be IPv4/IPv6 addresses or networksrelease_2013-04-10Dan McGee
This gives us a bunch more flexibility on this field, and now supports all the options that the rsync config file supports. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-29Add IP family lookup to CheckLocation modelDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-13mirrorcheck: s/if/elif/ when determining what check function to runrelease_2013-03-13Dan McGee
This was a silly thinko here; it caused the logs to fill up with a bunch of 'unknown url type: rsync' errors. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-12Don't check FTP + IPv6 combinationDan McGee
Very few, if any, FTP servers support connections over IPv6. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Don't add blank options to rsync command linerelease_2013-03-06Dan McGee
Rsync doesn't like this so much: Unexpected remote arg: rsync://mirror.example.com/archlinux/lastsync rsync error: syntax or usage error (code 1) at main.c(1214) [sender=3.0.9] Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Teach mirrorcheck management command about check locationsDan McGee
This adds the -l/--location argument to the command in order to pass in a check location that we are currently running from. This locks the IP address family to the one derived from the address on that location, and stores any check results tagged with a location ID. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Add location ID to mirror logsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Add family property to mirror check locationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Revert "mirrorcheck: Don't use bulk_create on sqlite3"Dan McGee
This reverts commit 3c4ceb16. We don't need this anymore as bulk_create gets automatic batching now on sqlite3 so it is safe to use. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Add mirror CheckLocationAdminDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Add 'created' field to more mirror modelsDan McGee
We have been better about doing this to most of our models, but the ones here didn't have a created field. Add it where appropriate and set a reasonably old default value. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-06Add mirror check locations modelDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-03-04Add HTTPS mirror protocol fixtureDan McGee
For now, it is not included in the default selection, but we have a few existing mirrors that do support it. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-02-09Use 'update_fields' model.save() kwargDan McGee
This was added in Django 1.5 and allows saving only a subset of a model's fields. It makes sense in a few cases to utilize it. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-20Lengthen the mirror rsync IP address fieldDan McGee
Make it long enough to support a full-form IPv6 address with a subnet. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-16Remove debugging print statementDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-14Support mirror status JSON by tierDan McGee
Just as we do for the normal status HTML view. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-14Ensure URLs without check data work on mirror details pageDan McGee
Less noticeable in production as the templates don't show '@@@INVALID@@@' there, but we were trying to access attributes that don't actually exist on certain mirror objects. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-14Drop country column from mirror tableDan McGee
We now always look for this information at the URL level, not the mirror level. This simplifies quite a bit of code in and around the mirror views. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-14Add migration to move country data down to the URL levelDan McGee
Rather than have the weird indirection we need now to find the right country for URLs, just always store it on the URL. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-13Use content_type and not mimetype on HttpResponse()Dan McGee
Bug #16519 in Django deprecates mimetype, so update our code accordingly. Signed-off-by: Dan McGee <dan@archlinux.org>
2013-01-12Round two of mirror status query improvementsDan McGee
This seems to generate much more performant queries at the database level than what we were previously doing, and also doesn't show duplicate rows. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-12-27Ensure mirror protocols are distinctDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-21Fix mirror URL duplication in status viewDan McGee
We need to ensure we don't duplicate URLs in the status view, so add a distinct() call back in to the queryset when it was inadvertently dropped in commit a2cfa7edbb. This negates a lot of the performance gains we had, unfortunately, so it looks like a nested subquery might be more efficient. Disappointing the planner can't do this for us. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-16Use Python 2.7 dictionary comprehension syntaxDan McGee
Rather than the old idiom of dict((k, v) for <> in <>). Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-16Optimize mirror status data fetchingDan McGee
Now that we have as many mirror URLs as we do, we can do a better job fetching and aggregating this data. The prior method resulted in a rather unwieldy query being pushed down to the database with a horrendously long GROUP BY clause. Instead of trying to group by everything at once so we can retrieve mirror URL info at the same time, separate the two queries- one for getting URL performance data, one for the qualitative data. The impetus behind fixing this is the PostgreSQL slow query log in production; this currently shows up the most of any queries we run in the system. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-12Prefetch the available protocols on the mirror overview pageDan McGee
Otherwise we are doing one query per mirror, which at this point is over 100 separate queries. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-12Add get_latest_by to MirrorLog Meta classDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-11Add title to mirror status data pointsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-11Mirror graph tweaking after usage with real dataDan McGee
* Clamp y-axis minimum to 0. * Don't plot `is_success == false` values. * Ensure URLs are sorted predictably. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-11Re-add nice() calls for mirror status axesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-11Mirror status graph, now with points AND linesDan McGee
We might have to tweak the interpolation method once we see this with real data, but for now it looks really pretty locally. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-11-10Enable mirror status graph resizingDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>