diff options
Diffstat (limited to 'resources/memtest86/patch/diff')
| -rw-r--r-- | resources/memtest86/patch/diff | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/resources/memtest86/patch/diff b/resources/memtest86/patch/diff new file mode 100644 index 0000000..0abd8d0 --- /dev/null +++ b/resources/memtest86/patch/diff @@ -0,0 +1,40 @@ +diff -rupN memtest86+-5.01_/config.h memtest86+-5.01/config.h +--- memtest86+-5.01_/config.h 2014-06-25 22:57:47.893476783 +0100 ++++ memtest86+-5.01/config.h 2014-06-25 22:59:01.269840630 +0100 +@@ -17,7 +17,7 @@ + #define CONSERVATIVE_SMP 1 + + /* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */ +-#define BEEP_MODE 0 ++#define BEEP_MODE 1 + + /* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */ + #define BEEP_END_NO_ERROR 0 +@@ -29,13 +29,13 @@ + /* SERIAL_CONSOLE_DEFAULT - The default state of the serial console. */ + /* This is normally off since it slows down testing. Change to a 1 */ + /* to enable. */ +-#define SERIAL_CONSOLE_DEFAULT 0 ++#define SERIAL_CONSOLE_DEFAULT 1 + + /* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ + #define SERIAL_TTY 0 + + /* SERIAL_BAUD_RATE - Baud rate for the serial console */ +-#define SERIAL_BAUD_RATE 9600 ++#define SERIAL_BAUD_RATE 115200 + + /* SCRN_DEBUG - extra check for SCREEN_BUFFER + */ +diff -rupN memtest86+-5.01_/Makefile memtest86+-5.01/Makefile +--- memtest86+-5.01_/Makefile 2014-06-25 22:57:47.893476783 +0100 ++++ memtest86+-5.01/Makefile 2014-06-25 22:59:19.237929751 +0100 +@@ -21,7 +21,7 @@ OBJS= head.o reloc.o main.o test.o init. + + + all: clean memtest.bin memtest +- scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus ++# scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus + + # Link it statically once so I know I don't have undefined + # symbols and then link it dynamically so I have full |