1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
|
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<style type="text/css">
body {
background:#fff;
color:#000;
font-family:sans-serif;
font-size:1em;
}
p.lenovobios {
font-weight:bold; color:#f00; font-style:italic; font-size:1.2em;
}
p.lenovobios:hover {
color: #000;
}
div.important {
background-color:#ccc;
}
</style>
<title>Libreboot documentation: Main</title>
</head>
<body>
<header>
<h1 id="pagetop">Libreboot Documentation</h1>
<aside>This is for the release, as per <a href="release.html">release.html</a>.</aside>
<aside>The latest release (along with documentation) can be found at <a href="http://libreboot.org/">libreboot.org</a></aside>
</header>
<p>
It is assumed that you are running GNU/Linux. No other operating system is known to be compatible (with libreboot) for this release.
</p>
<p>
The information here is mainly user documentation. For development notes and TODO's, see <a href="release.html">release.html</a> and
<a href="future/index.html">future/index.html</a>
</p>
<h2>GNU/Linux distributions</h2>
<ul>
<li><a href="howtos/grub_boot_installer.html">How to install a GNU/Linux distribution</a></li>
<li><a href="howtos/grub_cbfs.html">How to change your default GRUB menu</a></li>
<li>
<a href="howtos/encrypted_parabola.html">Installing Parabola GNU/Linux-libre with full disk encryption (including /boot)</a>
<ul>
<li>Follow-up tutorial: <a href="howtos/configuring_parabola.html">Configuring Parabola (post-install)</a></li>
</ul>
</li>
<li><a href="howtos/encrypted_trisquel.html">Installing Trisquel GNU/Linux-libre with full disk encryption (including /boot)</a></li>
</ul>
<h2>Working with source code</h2>
<ul>
<li><a href="#build_dependencies">Install build dependencies</a></li>
<li><a href="#build_meta">Get the full source code from metadata (git clone)</a></li>
<li><a href="#build_bucts">How to build "bucts" (for LenovoBIOS X60/X60S/X60T/T60)</a></li>
<li><a href="#build_flashrom">How to build "flashrom"</a></li>
<li>
<a href="#config">Configuring libreboot</a>
<ul>
<li><a href="#config_dmidecode">dmidecode</a></li>
<li><a href="#config_x60">ThinkPad X60</a></li>
<li><a href="#config_x60t">ThinkPad X60 Tablet</a></li>
<li><a href="#config_t60">ThinkPad T60</a></li>
<li><a href="#config_macbook21">MacBook2,1</a></li>
</ul>
</li>
<li><a href="#build">How to build your ROM's</a></li>
<li><a href="#build_addseabios">Add SeaBIOS to your ROM's</a></li>
</ul>
<h2>Supported hardware</h2>
<ul>
<li><a href="#supported_list">List of supported hardware</a></li>
<li><a href="#recommended_wifi">Recommended wifi chipsets</a></li>
<li><a href="#supported_x60_list">List of supported ThinkPad X60/X60s</a></li>
<li><a href="#supported_x60t_list">List of supported ThinkPad X60 Tablets</a></li>
<li><a href="#supported_t60_list">List of supported ThinkPad T60's</a></li>
<li><a href="#t60_ati_intel">ThinkPad T60 (ATI GPU) and ThinkPad T60 (Intel GPU) differences.</a></li>
<li><a href="#macbook11">Information about the Macbook1,1</a></li></li>
<li><a href="#macbook21">Information about the Macbook2,1</a></li></li>
</ul>
<h2>Installing libreboot (software: using internal programmer)</h2>
<ul>
<li><a href="#rom">Recommended ROM's to flash</a></li>
<li><a href="#flashrom_lenovobios">X60/X60S/X60T/T60: How to flash your ROM (if running Lenovo BIOS firmware)</a></li>
<li><a href="#flashrom_macbook21">macbook21: How to flash your ROM (if running Apple EFI firmware)</a></li>
<li><a href="#flashrom">X60/X60S/X60T/T60/macbook21: How to flash your ROM (if running libreboot or coreboot already)</a></li>
</ul>
<h2>Installing libreboot (hardware: using external programmer)</h2>
<ul>
<li><a href="howtos/x60_unbrick.html">ThinkPad X60/X60S: How to unbrick</a></li>
<li><a href="howtos/x60tablet_unbrick.html">ThinkPad X60 Tablet: How to unbrick</a></li>
<li><a href="howtos/t60_unbrick.html">ThinkPad T60: How to unbrick</a></li>
</ul>
<h2>Security topics</h2>
<ul>
<li><a href="howtos/x60_security.html">ThinkPad X60/X60S: hardware security</a></li>
<li><a href="howtos/t60_security.html">ThinkPad T60: hardware security</a></li>
</ul>
<h2>Hardware maintenance</h2>
<ul>
<li><a href="howtos/x60_heatsink.html">ThinkPad X60/X60S: change the fan/heatsink</a></li>
<li><a href="howtos/x60_lcd_change.html">ThinkPad X60/X60s: How to change the LCD panel</a> (incomplete. pics only for now)</li>
<li><a href="howtos/t60_lcd_15.html">ThinkPad T60 15.1" changing LCD panel</a></li>
<li><a href="howtos/t60_heatsink.html">ThinkPad T60: change the fan/heatsink</a></li>
</ul>
<h2>GRUB2 payload</h2>
<ul>
<li><a href="#grub_font">Setting font in GRUB</a></li>
<li><a href="#grub_keyboard">GRUB keyboard layouts</a>
<ul>
<li><a href="#grub_custom_keyboard">Custom keyboard layout in GRUB</a></li>
<li><a href="#grub_ukdvorak_keyboard">UK Dvorak keyboard layout in GRUB</a></li>
</ul>
</li>
</ul>
<h2>Miscallaneous</h2>
<ul>
<li><a href="#high_pitch_trisquel">High Pitched Whining Noise on Idle (how to remove in Trisquel)</a>
<ul>
<li><a href="#howtouse_powertop">Powertop - how to use</a></li>
<li><a href="#powertop_autostart">Powertop - Start automatically at boot time</a></li>
</ul>
</li>
<li><a href="#high_pitch_parabola">High Pitched Whining Noise on Idle (how to remove in Parabola)</a></li>
<li><a href="#serial">X60/T60: Serial port - how to use (for dock owners)</a></li>
<li><a href="patch.html">Using diff and patch</a></li>
<li><a href="#get_edid_panelname">Get EDID: Find out the name (model) of your LCD panel</a></li>
</ul>
<hr/>
<h1 id="why">What is libreboot, really?</h1>
<h2>
Project goals (and differences versus coreboot):
</h2>
<ul>
<li>
Coreboot contains blobs (proprietary data/code) and libreboot does not (it intentionally removes them).
</li>
<li>
Coreboot is hacker-friendly and focuses on software developers, libreboot is user-focused and attempts to
turn coreboot into a distribution, sort of like a GNU/Linux distribution (same concept, different software). For example, libreboot
distributes GRUB/memtest86+/bucts/flashrom (and more) and comes with user-focused documentation and build scripts; libreboot
is therefore made more 'user-friendly'.
</li>
</ul>
<p>
Libreboot is <b>not</b> a fork of coreboot, despite misconceptions of this fact. Libreboot (downstream supplier) is a parallel effort
which works closely with and re-bases on the latest coreboot (upstream supplier) every so often.
</p>
<p>
<b>
As such, all new coreboot development should be done in coreboot, not libreboot!
Libreboot is about deblobbing, and packaging coreboot in a user-friendly way, where most work is already done for the user!
If, for example you wanted to attempt porting a new motherboard then you should do that in coreboot. Libreboot will (as a downstream)
receive your change at some point in the future, in a future release.
</b>
</p>
<h2>
A 'stable' coreboot:
</h2>
<ul>
<li>
Coreboot uses the <a href="https://en.wikipedia.org/wiki/Rolling_release">rolling release</a> model
(and it is therefore quite volatile; one day when you build coreboot, it may or may not work correctly on your machine).
</li>
<li>
Libreboot changes less often (as far as the release model is concerned), focusing instead on 'tested' releases for <i>specific machines</i>.
At any given time, it might also be possible to build ROM images for systems other than those officially supported. If you get your board to work
(without violating the <i>"coreboot development goes in coreboot"</i> rule, then others could benefit from your work).
</li>
</ul>
<p>
On the other hand, coreboot is also strict about what it accepts (merges) into the main git repository:
most of the time, a lot of changes are under review at review.coreboot.org (as a way of encouraging as much further development
as possible before accepting the patch).
</p>
<p>
Meanwhile, libreboot is a lot less strict in this area and freely merges specific patches that are desirable, sometimes before they are merged into coreboot's main repository.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="build_dependencies">Install build dependencies</h1>
<p>
Before doing anything, you need the dependencies first.
</p>
<ul>
<li><b>deps-trisquel</b> script installs dependencies for Trisquel 6 (also tested in Trisquel 7).</li>
<li><b>deps-parabola</b> script installs dependencies for Parabola</li>
</ul>
<p>
For all other GNU/Linux distributions, you may have to adapt these scripts. By all means send patches!
</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="build_meta">Get the full source code from metadata (git clone)</h1>
<p>
If you downloaded libreboot from git, then there are some steps to download and patch
the source code for all relevant dependencies. The archive in the git repository used to be
available as a tarball called 'libreboot_meta.tar.gz'. It contains 'metadata' (scripts)
which define how the source was created (where it came from).
</p>
<p>
You can use the scripts included to download everything.
</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<p>
After that, run the get script:<br/>
<b>$ ./getall</b>
</p>
<p>
What this did was download everything (grub, coreboot, memtest86+, bucts, flashrom)
at the versions last tested for this release, and patch them. Read the script
in a text editor to learn more.
</p>
<p>
To build the ROM's, see <a href="#build">#build</a>.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="build_bucts">How to build "bucts" (for LenovoBIOS X60/X60S/X60T/T60)</h1>
<p>
<b>This is for Lenovo BIOS users on the ThinkPad X60/X60S, X60 Tablet and T60. If you have coreboot or libreboot running already, ignore this.</b>
</p>
<p>
Bucts is needed when flashing in software the X60/X60S/X60T/T60 ROM while Lenovo BIOS is running;
external flashing will be safe regardless.
Each ROM contains identical data inside the two final 64K region in the file.
This corresponds to the final two 64K regions in the flash chip. Lenovo BIOS will prevent you from writing the
final one, so running "<b>bucts 1</b>" will set the machine to boot from the other block instead (which
is writeable along with everything beneath it when using a patched flashrom. see <a href="#build_flashrom">#build_flashrom</a>).
After shutting down and booting up after the first flash,
the final 64K block is writeable so you flash the ROM again with an unpatched flashrom and run "<b>bucts 0</b>" to
make the machine boot from the normal (highest) block again.
</p>
<p>
BUC.TS utility is included in libreboot_src.tar.gz and libreboot_bin.tar.gz.<br/>
<b>If you downloaded from git, follow <a href="#build_meta">#build_meta</a> before you proceed.</b>
</p>
<p>
"BUC" means "<b>B</b>ack<b>u</b>p <b>C</b>ontrol" (it's a register) and "TS" means "<b>T</b>op <b>S</b>wap"
(it's a status bit). Hence "bucts" (BUC.TS). TS 1 and TS 0 corresponds to bucts 1 and bucts 0.
</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<p>
To build bucts, do this in the main directory:<br/>
<b>$ ./builddeps-bucts</b>
</p>
<p>
The "builddeps" script in libreboot_src also makes use of builddeps-bucts.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="build_flashrom">How to build "flashrom"</h1>
<p>
Flashrom is the utility for flashing/dumping ROM's. This is what you will use to install libreboot.
</p>
<p>
Flashrom source code is included in libreboot_src.tar.gz and libreboot_bin.tar.gz.<br/>
<b>If you downloaded from git, follow <a href="#build_meta">#build_meta</a> before you proceed.</b>
</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<p>
To build it, do that in the main directory:<br/>
<b>$ ./builddeps-flashrom</b>
</p>
<p>
After you've done that, under ./flashrom/ you will find the following executables:
</p>
<ul>
<li>
<b>flashrom</b>
<ul>
<li>For flashing while coreboot or libreboot is running.</li>
</ul>
</li>
<li>
<b>flashrom_lenovobios_sst</b>
<ul>
<li>This is patched for flashing while Lenovo BIOS is running on an X60 or T60 with the SST25VF016B (SST) flash chip.</li>
</ul>
</li>
<li>
<b>flashrom_lenovobios_macronix</b>
<ul>
<li>This is patched for flashing while Lenovo BIOS is running on an X60 or T60 with the MX25L1605D (Macronix) flash chip.</li>
</ul>
</li>
</ul>
<p>
The "builddeps" script in libreboot_src also makes use of builddeps-flashrom.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="config">Configuring libreboot</h1>
<p>
Before building a ROM in libreboot (or coreboot, for that matter), you need to configure it.
This is done using the following inside the source tree:<br/>
<b>$ make menuconfig</b>
</p>
<p>
If you've already built a kernel before, you know how to use this interface.
</p>
<p>
Configurations are then saved as files called <b>".config"</b>. Copies of each configuration used
for each machine type by the libreboot build scripts are stored in resources/libreboot/config/
</p>
<h2 id="config_dmidecode">
dmidecode
</h2>
<p>
There is certain information that can be useful to enter in particular:
</p>
<ul>
<li>Local version string</li>
<li>SMBIOS Serial Number</li>
<li>SMBIOS Manufacturer</li>
<li>SMBIOS Version</li>
<li>SMBIOS Product name</li>
</ul>
<p>
This information can be obtained using:<br/>
<b>$ sudo dmidecode</b><br/>
<b># dmidecode</b>
</p>
<p>
Specifically, it's good practise to enter the same information for libreboot that you found when running this
with the original BIOS or firmware. <b>libreboot has already done this for you. This information is for reference,
in the hope that it will be useful.</b>
</p>
<h2 id="config_x60">
ThinkPad X60 configuration (file: resources/libreboot/config/x60/config)
</h2>
<ul>
<li>General setup / Expert mode = <i>enable</i></li>
<li>General setup / Local version string = <i>7BETC7WW (2.08 )</i></li>
<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
<li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li>
<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
<li>Mainboard / SMBIOS Serial Number = <i>L3BH242</i></li>
<li>Mainboard / SMBIOS Version Number = <i>ThinkPad X60s</i></li>
<li>Mainboard / SMBIOS Manufacturer = <i>LENOVO</i></li>
<li>Mainboard / SMBIOS Product name = <i>1702L8G</i></li>
<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
<li>Devices / Use native graphics initialization = <i>enable</i></li>
<li>
Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
<ul>
<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li>
</ul>
</li>
<li>Generic Drivers / Digitizer = <i>Autodetect</i></li>
<li>Console / Send console output to a CBMEM buffer = <i>enable</i></li>
<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
<li>Payload / Payload path and filename = <i>grub.elf</i></li>
</ul>
<p>
Now go back into Devices:
</p>
<ul>
<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
</ul>
<p>
The resulting .config file was saved as resources/libreboot/config/<b>x60/config</b> and is used by the build
scripts for this machine.
</p>
<p>
This is based on an X60S with the Core 2 Duo L7400 processor.
</p>
<p>
SMBIOS Version Number is ThinkPad X60 on the X60, but it is believed that the X60 and X60s both have identical
motherboards where the only difference is the CPU. This same configuration is used on the X60 and X60s.
</p>
<h2 id="config_x60t">
ThinkPad X60 Tablet configuration (file: resources/libreboot/config/x60t/config)
</h2>
<ul>
<li>General setup / Expert mode = <i>enable</i></li>
<li>General setup / Local version string = <i>7JET23WW (1.08 )</i></li>
<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
<li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li>
<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
<li>Mainboard / SMBIOS Serial Number = <i>L3B8281</i></li>
<li>Mainboard / SMBIOS Version Number = <i>ThinkPad X60 Tablet</i></li>
<li>Mainboard / SMBIOS Manufacturer = <i>LENOVO</i></li>
<li>Mainboard / SMBIOS Product name = <i>6364WJ1</i></li>
<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
<li>Devices / Use native graphics initialization = <i>enable</i></li>
<li>
Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
<ul>
<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li>
</ul>
</li>
<li>Generic Drivers / Digitizer = <i>Present</i></li>
<li>Console / Send console output to a CBMEM buffer = <i>enable</i></li>
<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
<li>Payload / Payload path and filename = <i>grub.elf</i></li>
</ul>
<p>
Now go back into Devices:
</p>
<ul>
<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
</ul>
<p>
The resulting .config file was saved as resources/libreboot/config/<b>x60t/config</b> and is used by the build
scripts for this machine.
</p>
<p>
This is based on an X60T with the Core 2 Duo L7400 processor.
</p>
<h2 id="config_t60">
ThinkPad T60 configuration (file: resources/libreboot/config/t60/config)
</h2>
<ul>
<li>General setup / Expert mode = <i>enable</i></li>
<li>General setup / Local version string = <i>79ETE7WW (2.27 )</i></li>
<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
<li>Mainboard / Mainboard model = <i>ThinkPad T60 / T60p</i></li>
<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
<li>Mainboard / SMBIOS Serial Number = <i>L3DKE06</i></li>
<li>Mainboard / SMBIOS Version Number = <i>ThinkPad T60</i></li>
<li>Mainboard / SMBIOS Manufacturer = <i>LENOVO</i></li>
<li>Mainboard / SMBIOS Product name = <i>1951FEG</i></li>
<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
<li>Devices / Use native graphics initialization = <i>enable</i></li>
<li>
Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
<ul>
<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li>
</ul>
</li>
<li>Console / Send console output to a CBMEM buffer = <i>enable</i></li>
<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
<li>Payload / Payload path and filename = <i>grub.elf</i></li>
</ul>
Go back into Devices:
</p>
<ul>
<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
</ul>
<p>
The resulting .config file was saved as resources/libreboot/config/<b>t60/config</b> and is used by the build
scripts for this machine.
</p>
<p>
It is believed that the motherboards on 14.1" and 15.1" T60's are the same, so the same configuration is used
on both the 14.1" and 15.1" T60's.
</p>
<h2 id="config_macbook21">
MacBook2,1 configuration (file: resources/libreboot/config/macbook21/config)
</h2>
<ul>
<li>General / Expert mode = <i>enable</i></li>
<li>General / Local version string = <i>" MB21.88Z.00A5.B07.0706270922"</i> (without the quotes)</li>
<li>Mainboard / Mainboard vendor = <i>Apple</i></li>
<li>Mainboard / Mainboard model = <i>Macbook2,1 ICH7 TESTING</i></li>
<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
<li>Mainboard / SMBIOS Serial Number = <i>W8724XXXXXX</i></li>
<li>Mainboard / SMBIOS Version Number = <i>1.0</i></li>
<li>Mainboard / SMBIOS Manufacturer = <i>Apple Inc.</i></li>
<li>Mainboard / SMBIOS Product Name = <i>MacBook2,1</i></li>
<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
<li>Devices / Use native graphics initialization = <i>enable</i></li>
<li>
Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
<ul>
<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li>
</ul>
</li>
<li>Console / Send console output to a CBMEM buffer = <i>enable</i></li>
<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
<li>Payload / Payload path and filename = <i>grub.elf</i></li>
</ul>
<p>
Go back and disable option ROM's:
</p>
<ul>
<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
</ul>
<p>
The resulting .config file was saved as resources/libreboot/config/<b>macbook21/config</b> and is used by the build
scripts for this machine. <b>This config is also used for the MacBook1,1</b>.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="build">How to build the ROM's!</h1>
<p>You don't need to do much, as there are scripts already written for you that can build everything automatically.</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<p>If running for the first time, run this:<br/>
<b>$ ./buildall</b> (also performs the "./build" step below)<br/>
Or if you only want to build dependencies (crossgcc, grub and so on):<br/>
<b>$ ./builddeps</b></p>
<p>If you've already run ./builddeps and/or ./buildall before, you don't need to run them again.
Just run that from now on to build your ROM's:<br/>
<b>$ ./build</b></p>
<p>To un-build (clean) the build dependencies that you built before, do the following:<br/>
This also deletes the ROM images under ./bin/:<br/>
<b>$ ./cleandeps</b></p>
<p>Note: after running 'cleandeps', you will need to run 'builddeps' or 'buildall' again before you can use 'build'.</p>
<p>After 'build' or 'buildall' has finished, you'll find the ROM images for each machine under ./bin/</p>
<h2>Preparing release archives (optional)</h2>
<p>
Run that script:<br/>
<b>$ ./build-release</b>
</p>
<p>
You'll find that the files libreboot_bin.tar.xz and libreboot_src.tar.xz have been created.
</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="build_addseabios">How to add SeaBIOS to your ROM's</h1>
<p>
SeaBIOS isn't really needed since libreboot uses the GRUB payload which
is much better (for several reasons), so it is no longer included in the ROM
images by default. Instead, you can add it afterwards.
</p>
<p>
In the supplied binary archives, or in your own (if you did 'build-release') you can add SeaBIOS
to the ROM images, along with SeaVGABIOS which is a free/libre Video BIOS implementation that wraps
around the 'native graphics initializitation' code in coreboot, for boards that have support for it.
</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<p>
Build cbfstool:<br/>
$ <b>./builddeps-cbfstool</b>
</p>
<p>
Now:<br/>
$ <b>./addseabios</b>
</p>
<p>
SeaBIOS and SeaVGABIOS (which the build scripts created, and the build-release script put - compiled -
inside the binary archive) have now been added to all of the ROM images under ./bin/. A GRUB menuentry will show
up when you boot your machine, allowing you to use SeaBIOS.
</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="supported_list">List of supported hardware</h1>
<p>
Libreboot supports the following machines in this release:
</p>
<ul>
<li><a href="#supported_x60_list">Lenovo ThinkPad X60/X60s</a></li>
<li><a href="#supported_x60t_list">Lenovo ThinkPad X60 Tablet</a></li>
<li><a href="#supported_t60_list">Lenovo ThinkPad T60</a> (there are exceptions. see link)</li>
<li><a href="#macbook11">Apple MacBook1,1</a></li>
<li><a href="#macbook21">Apple MacBook2,1</a></li>
</ul>
<p>
'Supported' means that the build scripts know how to build ROM's for these machines,
and that the machines have been tested (confirmed working). There may be exceptions;
in other words, this is a list of 'officially' supported machines.
</p>
<p>
It is also possible to build ROM images (from source) for other machines (and virtual machines, e.g. QEMU).
</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="recommended_wifi">Recommended wifi chipsets</h1>
<p>
The following are known to work well:
</p>
<ul>
<li><a href="http://h-node.org/search/results/en/1/search/wifi/ar9285">Atheros AR5B95</a> (chipset: Atheros AR9285); mini PCI-E. Most of these are half-height, so you will need a half>full height mini PCI express adapter/bracket.</li>
<li><a href="http://h-node.org/wifi/view/en/116/Atheros-Communications-Inc--AR928X-Wireless-Network-Adapter--PCI-Express---rev-01-">Atheros AR928X</a> chipset; mini PCI-E. Most of these are half-height, so you will need a half>full height mini PCI express adapter/bracket</li>
<li>Unex DNUA-93F (chipset: <a href="http://h-node.org/search/results/en/1/search/wifi/ar9271">Atheros AR9271</a>); USB.</li>
<li>Any of the chipsets listed at <a href="https://fsf.org/ryf">https://fsf.org/ryf</a></li>
<li>Any of the chipsets listed at <a href="http://h-node.org/wifi/catalogue/en/1/1/undef/undef/yes?">http://h-node.org/wifi/catalogue/en/1/1/undef/undef/yes?</a>
</ul>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="supported_x60_list">List of supported ThinkPad X60's</h1>
<p>
Native gpu initialization ('native graphics') which replaces the proprietary VGA Option ROM
('<a href="https://en.wikipedia.org/wiki/Video_BIOS">Video BIOS</a>' or 'VBIOS'),
all known LCD panels are currently compatible:
</p>
<p>
To find what LCD panel you have, see: <a href="#get_edid_panelname">#get_edid_panelname</a>.
</p>
<ul>
<li>TMD-Toshiba LTD121ECHB: #</li>
<li>CMO N121X5-L06: #</li>
<li>Samsung LTN121XJ-L07: #</li>
<li>BOE-Hydis HT121X01-101: #</li>
</ul>
<p>
You can remove an X61/X61s motherboard from the chassis and install an X60/X60s motherboard in it's place (for flashing libreboot). The chassis is mostly identical
and the motherboards are the same shape/size.
</p>
<p>
The X60 typically comes with an Intel wifi chipset which does not work at all without proprietary firmware, and while Lenovo BIOS is running
the machine will refuse to boot if you replace the card. Fortunately it is very easily replaced;
just remove the card and install another one <b>after</b> libreboot is installed. See <a href="#recommended_wifi">#recommended_wifi</a> for replacements.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="supported_x60t_list">List of supported ThinkPad X60 Tablets</h1>
<p>
Native gpu initialization ('native graphics') which replaces the proprietary VGA Option ROM
('<a href="https://en.wikipedia.org/wiki/Video_BIOS">Video BIOS</a>' or 'VBIOS').
</p>
<p>
To find what LCD panel you have, see: <a href="#get_edid_panelname">#get_edid_panelname</a>.
</p>
<p>
There are 5 known LCD panels for the X60 Tablet:
</p>
<ul>
<li>
<b>X60T XGA (1024x768):</b>
<ul>
<li>BOE-Hydis HV121X03-100 (works)</li>
<li>Samsung LTN121XP01 (does not work. blank screen)</li>
<li>BOE-Hydis HT12X21-351 (does not work. blank screen)</li>
</ul>
</li>
<li>
<b>X60T SXGA+ (1400x1050):</b>
<ul>
<li>BOE-Hydis HV121P01-100 (works)</li>
<li>BOE-Hydis HV121P01-101 (works)</li>
</ul>
</li>
</ul>
<p>
Most X60T's only have digitizer (pen), but some have finger (touch) aswell as pen; finger/multitouch doesn't work, only digitizer (pen) does.
</p>
<p>
You can remove an X61/X61s motherboard from the chassis and install an X60/X60s motherboard in it's place (for flashing libreboot). The chassis is mostly identical
and the motherboards are the same shape/size. <b>It is unknown if the same applies between the X60 Tablet and the X61 Tablet</b>.
</p>
<p>
The X60 Tablet typically comes with an Intel wifi chipset which does not work at all without proprietary firmware, and while Lenovo BIOS is running
the machine will refuse to boot if you replace the card. Fortunately it is very easily replaced;
just remove the card and install another one <b>after</b> libreboot is installed. See <a href="#recommended_wifi">#recommended_wifi</a> for replacements.
</p>
<p>
A user with a X60T that has digitizer+finger support, reported that they could get finger input working. They
used linuxwacom at git tag 0.25.99.2 and had the following in their xorg.conf:
</p>
<pre>
# This file be public domain.
# Now, for some reason (probably a bug in linuxwacom),
# the 'Touch=on' directive gets reset to 'off'.
# So you'll need to do
# $ xsetwacom --set WTouch Touch on
#
# tested with linuxwacom git 42a42b2a8636abc9e105559e5dea467163499de7
Section "Monitor"
Identifier "<default monitor>"
DisplaySize 245 184
EndSection
Section "Screen"
Identifier "Default Screen Section"
Monitor "<default monitor>"
EndSection
Section "InputDevice"
Identifier "WTouch"
Driver "wacom"
Option "Device" "/dev/ttyS0"
# Option "DebugLevel" "12"
Option "BaudRate" "38400"
Option "Type" "touch"
Option "Touch" "on"
Option "Gesture" "on"
Option "ForceDevice" "ISDV4"
# Option "KeepShape" "on"
Option "Mode" "Absolute"
Option "RawSample" "2"
# Option "TPCButton" "off"
Option "TopX" "17"
Option "TopY" "53"
Option "BottomX" "961"
Option "BottomY" "985"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen Section"
InputDevice "WTouch" "SendCoreEvents"
EndSection
</pre>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="supported_t60_list">Supported T60 list</h1>
<p>
Native gpu initialization ('native graphics') which replaces the proprietary VGA Option ROM
('<a href="https://en.wikipedia.org/wiki/Video_BIOS">Video BIOS</a>' or 'VBIOS').
</p>
<p>
To find what LCD panel you have, see: <a href="#get_edid_panelname">#get_edid_panelname</a>.
</p>
<p>
<b>
Some T60's have ATI GPU's, and all T60p's have ATI GPU's These are incompatible! See <a href="#t60_ati_intel">#t60_ati_intel</a> for how to remedy this.
</b>
</p>
<p>
How to dump the EDID:<br/>
</p>
<p>
Tested LCD panels: <b>working(compatible)</b>
</p>
<ul>
<li>TMD-Toshiba LTD141EN9B (14.1" 1400x1050) (FRU P/N 41W1478 recommended for the inverter board)</li>
<li>Samsung LTN141P4-L02 (14.1" 1400x1050) (FRU P/N 41W1478 recommended for the inverter board)</li>
<li>LG-Philips LP150E05-A2K1 (15.1" 1400x1050) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
<li>Samsung LTN150P4-L01 (15.1" 1400x1050) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board) (not a T60 screen afaik, but it works)</li>
<li>BOE-Hydis HV150UX1-100 (15.1" 1600x1200) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
<li>IDtech IAQX10N (15.1" 2048x1536) (GRUB doesn't display at the moment, but GNU/Linux works) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
</ul>
<div class="important">
<p>
Tested LCD panels: <b>not working yet (incompatible; see <a href="future/index.html#lcd_i945_incompatibility">future/index.html#lcd_i945_incompatibility</a>)</b>
</p>
<ul>
<li>Samsung LTN141XA-L01 (14.1" 1024x768)</li>
<li>LG-Philips LP150X09 (15.1" 1024x768)</li>
<li>Samsung LTN150XG (15.1" 1024x768) - <a href="future/dumps/LTN150XG_edid">EDID dump</a> (taken using <b>sudo i2cdump -y 5 0x50</b>)</li>
<li>LG-Philips LP150E06-A5K4 (15.1" 1400x1050) (also, not an official T60 screen)</li>
<li>Samsung LTN154X3-L0A (15.4" 1280x800)</li>
</ul>
<p>
<u><i>The following LCD panels are <b>UNTESTED</b>. If you have one of these panels
then please submit a report!</i></u>:
</p>
<ul>
<li>CMO(IDtech?) N141XC (14.1" 1024x768)</li>
<li>BOE-Hydis HT14X14 (14.1" 1024x768)</li>
<li>TMD-Toshiba LTD141ECMB (14.1" 1024x768)</li>
<li>Boe-Hydis HT14P12 (14.1" 1400x1050) (FRU P/N 41W1478 recommended for the inverter board)</li>
<li>CMO (IDtech?) 13N7068 (15.1" 1024x768)</li>
<li>CMO (IDtech?) 13N7069 (15.1" 1024x768)</li>
<li>BOE-Hydis HV150P01-100 (15.1" 1400x1050) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
<li>IDtech N150U3-L01 (15.1" 1600x1200) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
<li>BOE-Hydis HV150UX1-102 (15.1" 1600x1200) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
<li>IDtech IAQX10S (15.1" 2048x1536) (P/N 42T0078 FRU 42T0079 or P/N 41W1338 recommended for the inverter board)</li>
<li>Samsung LTN154P2-L05 (42X4641 42T0329) (15.4" 1680x1050)</li>
<li>LG-Philips LP154W02-TL10 (13N7020 42T0423) (15.4" 1680x1050)</li>
<li>LG-Philips LP154WU1-TLB1 (42T0361) (15.4" 1920x1200) <b>(for T61p but it might work in T60. Unknown!)</b></li>
<li>Samsung LTN154U2-L05 (42T0408 42T0574) (15.4" 1920x1200) <b>(for T61p but it might work in T60. Unknown!)</b></li>
</ul>
<p>
It is unknown whether the 1680x1050 (15.4") and 1920x1200 (15.4") panels use a different inverter board than the 1280x800 panels.
</p>
<p>
The T60 typically comes with an Intel wifi chipset which does not work at all without proprietary firmware, and while Lenovo BIOS is running
the machine will refuse to boot if you replace the card. Fortunately it is very easily replaced;
just remove the card and install another one <b>after</b> libreboot is installed. See <a href="#recommended_wifi">#recommended_wifi</a> for replacements.
</p>
</div>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="t60_ati_intel">ThinkPad T60 (ATI GPU) and ThinkPad T60 (Intel GPU) differences.</h1>
<p>
If your T60 is a 14.1" or 15.1" model with an ATI GPU, it won't work with libreboot by default but
you can replace the motherboard with another T60 motherboard that has an Intel GPU, and then libreboot should work.
</p>
<p>
As far as I know, 14.1" (Intel GPU) and 15.1" (Intel GPU) T60 motherboards are the same, where
'spacers' are used on the 15.1" T60. In any case, it makes sense to find one that is guaranteed to fit in your chassis.
</p>
<p>
There is also a 15.4" T60 with Intel GPU.
</p>
<p>
Note: the T60<b>p</b> laptops all have ATI graphics.
The T60p laptops cannot be used with libreboot under any circumstances.
</p>
<p>
The following T60 motherboard (see area highlighted in white) shows an empty space where the ATI GPU would be (this particular motherboard has an Intel GPU):
<img src="howtos/t60_dev/t60_unbrick.jpg" alt="" />
</p>
<p>
The reason that the ATI GPU on T60 is unsupported is due to the VBIOS (Video BIOS) which is non-free.
The VBIOS for the Intel GPU on X60/T60 has been reverse engineered, and replaced with Free Software and
so will work in libreboot.
</p>
<p>
The 'Video BIOS' is what initializes graphics.
</p>
<p>
See: <a href="https://en.wikipedia.org/wiki/Video_BIOS">https://en.wikipedia.org/wiki/Video_BIOS</a>.<br/>
In fact, lack of free VBIOS in general is a big problem in coreboot, and is one reason (among others) why many ports for coreboot are
unsuitable for libreboot's purpose.
</p>
<p>
Theoretically, the ThinkPad T60 with ATI GPU can work with libreboot and have ROM's compiled for it, however
in practise it would not be usable as a laptop because there would be no visual display at all. That being said,
such a configuration is acceptable for use in a 'headless' server setup (with serial and/or ssh console as the display).
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="macbook11">Information about the macbook1,1</h1>
<p>
There is an Apple laptop called the macbook1,1 from 2006 which uses the same i945 chipset as the ThinkPad X60/T60.
A developer ported the <a href="#macbook21">MacBook2,1</a> to coreboot, the ROM images also work on the macbook1,1.
</p>
<p>
You can refer to <a href="#macbook21">#macbook21</a> for most of this. Macbook2,1 laptops come with Core 2 Duo processors
which support 64-bit operating systems (and 32-bit). The MacBook1,1 uses Core Duo processors (supports 32-bit OS but not 64-bit),
and it is believed that this is the only difference.
</p>
<p>
It is believed that all models are compatible, listed here:
</p>
<ul>
<li><a href="http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook1,1">http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook1,1</a></li>
</ul>
<h2>
Compatible models
</h2>
<p>
Specifically (Order No. / Model No. / CPU):
</p>
<ul>
<li>MA255LL/A / A1181 (EMC 2092) / Core Duo T2500 <b>(tested - working)</b></i>
<li>MA254LL/A / A1181 (EMC 2092) / Core Duo T2400 (untested)</li>
<li>MA472LL/A / A1181 (EMC 2092) / Core Duo T2500 (untested)</li>
</ul>
<p>
Also of interest: <a href="#config_macbook21">#config_macbook21</a>.
</p>
<p>
Unbricking: <a href="https://www.ifixit.com/Device/MacBook_Core_2_Duo">this page shows disassembly guides</a> and mono's page (see <a href="#macbook21">#macbook21</a>)
shows the location of the SPI flash chip on the motherboard. <a href="https://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+Replacement/529">How to remove the motherboard</a>.
</p>
<p>
No method is yet known for flashing in GNU/Linux while the Apple firmware is running. You will need to disassemble the machine and flash externally.
Reading from flash seems to work. Bus Pirate recommended for external flashing (there are others) and needed tools: clip (eg Pomona 5250), mini usb cable,
bus pirate cable (for connecting Pomona to the bus pirate).
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="macbook21">Information about the macbook2,1</h1>
<p>
There is an Apple laptop called the macbook2,1 from late 2006 or early 2007 that uses the same i945 chipset
as the ThinkPad X60 and ThinkPad T60. A developer ported coreboot to his macbook2,1, and now libreboot can run on it.
</p>
<p>
Mono Moosbart is the person who wrote the port for macbook2,1. Referenced below are copies (up to date at the time of writing, 20140630)
of the pages he wrote when porting coreboot to the macbook2,1. They are included here in case the main site goes down for
whatever reason, since they include a lot of useful information.
</p>
<p>
Backups created using wget:<br/>
<b>$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/</b><br/>
<b>$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/coreboot/</b><br/>
Use <b>-e robots=off</b> if using this trick for other sites and the site restricts using robots.txt
</p>
<p>
<b>Links to wget backups (and the backups themselves) of Mono's pages (see above) removed temporarily. Mono has given me permission to distribute them, but I need to ask
him to tell me what license these works fall under first. Otherwise, the above URL's should be fine. NOTE TO SELF: REMOVE THIS WHEN DONE</b>
</p>
<h2>
Installing GNU/Linux distributions (on Apple EFI firmware)
</h2>
<ul>
<li><a href="#">Parabola GNU/Linux installation on a macbook2,1 with Apple EFI firmware</a> (this is a copy of Mono's page, see above)</li>
</ul>
<p>
How to boot an ISO: burn it to a CD (like you would normally) and hold down the Alt/Control key while booting.
The bootloader will detect the GNU/Linux CD as 'Windows' (because Apple doesn't think GNU/Linux exists). Install it like you normally would.
When you boot up again, hold Alt/Control once more. The installation (on the HDD) will once again be seen as 'Windows'. (it's not actually Windows,
but Apple likes to think that Apple and Microsoft are all that exist.)
Now to install libreboot, follow <a href="#flashrom_macbook21">#flashrom_macbook21</a>.
</p>
<h2>
Information about coreboot
</h2>
<ul>
<li><a href="#">Coreboot on the macbook2,1</a> (this is a copy of Mono's page, see above)</li>
</ul>
<h2>
coreboot wiki page
</h2>
<ul>
<li><a href="http://www.coreboot.org/Board:apple/macbook21">http://www.coreboot.org/Board:apple/macbook21</a></li>
</ul>
<h2>
Compatible models
</h2>
<p>
It is believed that all models are compatible, listed here:
</p>
<ul>
<li><a href="http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook2,1">http://www.everymac.com/ultimate-mac-lookup/?search_keywords=MacBook2,1</a></li>
</ul>
<p>
Specifically (Order No. / Model No. / CPU):
</p>
<ul>
<li>MA699LL/A / A1181 (EMC 2121) / Intel Core 2 Duo T5600 <b>(tested - working)</b></li>
<li>MA701LL/A / A1181 (EMC 2121) / Intel Core 2 Duo T7200 <b>(tested - working)</b></li>
<li>MB061LL/A / A1181 (EMC 2139) / Intel Core 2 Duo T7200 (untested)</li>
<li>MA700LL/A / A1181 (EMC 2121) / Intel Core 2 Duo T7200 <b>(tested - working)</b></li>
<li>MB063LL/A / A1181 (EMC 2139) / Intel Core 2 Duo T7400 (untested)</li>
<li>MB062LL/A / A1181 (EMC 2139) / Intel Core 2 Duo T7400 <b>(tested - working)</b></li>
</ul>
<p>
Also of interest: <a href="#config_macbook21">#config_macbook21</a>.
</p>
<p>
Unbricking: <a href="https://www.ifixit.com/Device/MacBook_Core_2_Duo">this page shows disassembly guides</a> and mono's page (see above)
shows the location of the SPI flash chip on the motherboard. <a href="https://www.ifixit.com/Guide/MacBook+Core+2+Duo+PRAM+Battery+Replacement/529">How to remove the motherboard</a>.
</p>
<p>
Bus Pirate recommended for external flashing (there are others) and needed tools: clip (eg Pomona 5250), mini usb cable,
bus pirate cable (for connecting Pomona to the bus pirate).
</p>
<p>
You need to replace OS X with GNU/Linux before flashing libreboot. (OSX won't run at all in libreboot).
</p>
<p>
There are some issues with this machine (compared to other computers that libreboot supports):
</p>
<p>
This is an apple laptop, so it comes with OS X: it has an Apple keyboard, which means that certain keys you expect are missing:
insert, del, home, end, pgup, pgdown. There is also one mouse button only. Battery life is poor compared to X60/T60 (for now).
It also has other issues: for example, the Apple logo on the back is a hole, exposing the backlight, which means that it glows. You should cover it up.
</p>
<p>
The macbook21 gets extremely hot under GNU/Linux and libreboot; Macfanctld (mac fan control daemon) I'm told is a programme (GPLv3 license) that can help with this.
</p>
<p>
Debugging the heating issues (initial work):<br/>
Distro: Trisquel 7. kernel(linux-libre): 3.13.0-32<br/>
<b>CPU temperatures:</b><br/>
52C(idle)/81C(stress) on factory.bin<br/>
70C(idle)/80C(stress) on coreboot(with microcode updates). libreboot results (without microcode updates) were the same.<br/>
(libreboot and coreboot rom's were both built from the same code, just with or without microcode included in the rom)<br/>
battery life was higher on original firmware, lower on coreboot/libreboot.<br/>
microcode patches included [y/n] makes no difference.<br/>
libreboot: 1hr18min left on idle (99% battery), 42mins left on stress (82% battery)<br/>
factory.bin: 2 hours left on idle (99% battery), 48mins left on stress (82% battery)
</p>
<p>
Todo: see what the non-free firmware has in it's ACPI tables using acpidump and iasl -d. Try to implement cstate support in coreboot
(this will allow for lower temperatures).
</p>
<p>
<b>
The MacBook2,1 comes with a webcam, which does not work without proprietary software. Also, webcams are a security risk; cover it up! Or remove it.
</b>
</p>
<p>
A user reported that they could get better response from the touchpad with the following in their xorg.conf:
</p>
<pre>
Section "InputClass"
Identifier "Synaptics Touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
# The next two values determine how much pressure one needs
# for tapping, moving the cursor and other events.
Option "FingerLow" "10"
Option "FingerHigh" "15"
# Do not emulate mouse buttons in the touchpad corners.
Option "RTCornerButton" "0"
Option "RBCornerButton" "0"
Option "LTCornerButton" "0"
Option "LBCornerButton" "0"
# One finger tap = left-click
Option "TapButton1" "1"
# Two fingers tap = right-click
Option "TapButton2" "3"
# Three fingers tap = middle-mouse
Option "TapButton3" "2"
# Try to not count the palm of the hand landing on the touchpad
# as a tap. Not sure if helps.
Option "PalmDetect" "1"
# The following modifies how long and how fast scrolling continues
# after lifting the finger when scrolling
Option "CoastingSpeed" "20"
Option "CoastingFriction" "200"
# Smaller number means that the finger has to travel less distance
# for it to count as cursor movement. Larger number prevents cursor
# shaking.
Option "HorizHysteresis" "10"
Option "VertHysteresis" "10"
# Prevent two-finger scrolling. Very jerky movement
Option "HorizTwoFingerScroll" "0"
Option "VertTwoFingerScroll" "0"
# Use edge scrolling
Option "HorizEdgeScroll" "1"
Option "VertEdgeScroll" "1"
EndSection
</pre>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="rom">Recommended ROM's to flash</h1>
<p>
List of directories corresponding to each board:
</p>
<ul>
<li>ThinkPad X60, X60s: <b>bin/x60/</b></li>
<li>ThinkPad X60 Tablet: <b>bin/x60t/</b></li>
<li>ThinkPad T60: <b>bin/t60/</b> (note, see <a href="#supported_t60_list">#supported_t60_list</a>)</li>
<li>Apple MacBook2,1: <b>bin/macbook21/</b></li>
<li>Apple MacBook1,1: <b>bin/macbook21/</b> (it's not a typo; the same ROM's work)</li>
</ul>
<p>These images use coreboot text-mode graphics:</p>
<ul>
<li>US Qwerty keyboard: <b>libreboot_usqwerty_txtmode.rom</b></li>
<li>UK Qwerty keyboard: <b>libreboot_ukqwerty_txtmode.rom</b></li>
<li>US Dvorak keyboard: <b>libreboot_usdvorak_txtmode.rom</b></li>
<li>UK Dvorak keyboard: <b>libreboot_ukdvorak_txtmode.rom</b></li>
<li>French Azerty keyboard: <b>libreboot_frazerty_txtmode.rom</b></li>
<li>Italian Qwerty keyboard: <b>libreboot_itqwerty_txtmode.rom</b></li>
<li>Swedish Qwerty keyboard: <b>libreboot_svenska_txtmode.rom</b></li>
</ul>
<p>These images use coreboot framebuffer graphics:</p>
<ul>
<li>US Qwerty keyboard: <b>libreboot_usqwerty_vesafb.rom</b></li>
<li>UK Qwerty keyboard: <b>libreboot_ukqwerty_vesafb.rom</b></li>
<li>US Dvorak keyboard: <b>libreboot_usdvorak_vesafb.rom</b></li>
<li>UK Dvorak keyboard: <b>libreboot_ukdvorak_vesafb.rom</b></li>
<li>French Azerty keyboard: <b>libreboot_frazerty_vesafb.rom</b></li>
<li>Italian Qwerty keyboard: <b>libreboot_itqwerty_vesafb.rom</b></li>
<li>Swedish Qwerty keyboard: <b>libreboot_svenska_vesafb.rom</b></li>
</ul>
<p>
_txtmode images come with a working MemTest86+ and GRUB Invaders, both of which require text-mode.
_vesafb images are recommended in most cases.
</p>
<p>
This will give you your native keyboard layout inside GRUB. The preferences in your OS are not affected, it just makes using
the GRUB command line easier (if you ever need to do that).
<a href="#grub_keyboard">#grub_keyboard</a>shows you how this was done. If your native keyboard layout
differs, you can adapt those notes and hack the 'build' script for your needs.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="flashrom_lenovobios">X60/X60S/X60T/T60: How to flash the ROM's onto your machine (if running Lenovo BIOS firmware).</h1>
<div class="important">
<p>
Hover over the next paragraph to make it black.
</p>
<p class="lenovobios">
Following this guide means simply flashing a libreboot ROM. This guide will not (directly) teach you how to make a backup (dump) of the original Lenovo BIOS
because to do so would be to explicitly endorse proprietary software. However, for the purposes of reverse engineering it can be useful
to have a backup. Each copy of the original Lenovo BIOS is tied to the specific machine that it came from; it will not run
on any other machine, even if it's the same type of machine as yours. What this means is that, effectively, you can back it up now (so that you can
re-flash it later if you want to run the original Lenovo BIOS again) or lose it forever. The X60/T60 installation
guide on the coreboot wiki will show you how to do this:
<a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.<br/>
Do not make this decision lightly! This is your last and only chance.
</p>
<p>
The following is for the libreboot image and *not* the factory bios dump:
</p>
<p>
Check the last two 64K regions in your ROM file (libreboot.rom in this example):<br/>
<b>$ dd if=libreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s libreboot.rom) - 0x10000] count=64k</b><br/>
<b>$ dd if=libreboot.rom of=lower64k.bin bs=1 skip=$[$(stat -c %s libreboot.rom) - 0x20000] count=64k</b><br/>
<b>$ sha512sum lower64k.bin top64k.bin</b><br/>
Make *sure* that they match before you continue. The ROM's included pre-compiled in libreboot should already match.
If they don't match, then do this (based on those instructions from <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">coreboot wiki</a>):<br/>
<b>$ dd if=top64k.bin of=libreboot.rom bs=1 seek=$[$(stat -c %s libreboot.rom) - 0x20000] count=64k conv=notrunc</b><br/>
After this, the ROM will be safe to flash. Explanation is provided in <a href="#build_bucts">#build_bucts</a>.
</p>
</div>
<p><b>This is for the ThinkPad X60 and T60 while running Lenovo BIOS. If you already have coreboot or libreboot running,
then go to <a href="#flashrom">#flashrom</a> instead!</b></p>
<p><b>If you are flashing a Lenovo ThinkPad T60, be sure to read <a href="#supported_t60_list">#supported_t60_list</a></b></p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<div class="important">
<p>
<b>
Before you proceed, make *sure* to build flashrom and bucts from source. Both are provided. This is very important!
</b>
</p>
<ul>
<li><a href="#build_flashrom">How to build flashrom from source</a></li>
<li><a href="#build_bucts">How to build bucts from source</a></li>
</ul>
</div>
<p>"YOURBOARD/YOURROM" should be replaced with what is correct as per <a href="#rom">#rom</a>. Alternatively
you may be using your own custom ROM. Adapt.</p>
<p>
Run the script:<br/>
<b>$ sudo ./lenovobios_firstflash bin/<a href="#rom">YOURBOARD/YOURROM</a>.</b>
</p>
<div class="important">
<p>
You should see within the output the following:<br/>
<b>"Updated BUC.TS=1 - 64kb address ranges at 0xFFFE0000 and 0xFFFF0000 are swapped"</b>.
</p>
<p>
You should also see within the output the following:<br/>
<b>"Flash chip is in an unknown state"</b>, <b>"FAILED"</b> and <b>"DO NOT SHUTDOWN OR REBOOT"</b><br/>
Seeing this means that the operation was a <b>resounding</b> success! <b>DON'T PANIC</b>.
</p>
<p>
See this link for more details:
<a href="http://thread.gmane.org/gmane.linux.bios.flashrom/575">http://thread.gmane.org/gmane.linux.bios.flashrom/575</a>.
</p>
<p>
If the above is what you see, then <b>SHUT DOWN</b>. Wait a few seconds, and then boot; libreboot is running, but there is a 2nd procedure <b>*needed*</b> (see below).
</p>
</div>
<p>
<b>
If you boot and you see nothing, try turning up the backlight (Fn+Home).
</b>
</p>
<p>
When you have booted up again:<br/>
<b>$ sudo ./lenovobios_secondflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
</p>
<div class="important">
<p>
You should see within the output the following:<br/>
<b>"Updated BUC.TS=0 - 128kb address range 0xFFFE0000-0xFFFFFFFF is untranslated"</b>
</p>
<p>
You should also see within the output the following:<br/>
<b>"Verifying flash... VERIFIED."</b>
</p>
<p>Shut down again, wait a few seconds, and then boot.</p>
</div>
<p>
Some thinkpads come with WWAN cards installed, along with sim cards. These use non-free firmware and should be removed.
You might also want to remove bluetooth. See <a href="howtos/x60_security.html">x60_security.html</a> and
<a href="howtos/t60_security.html">t60_security.html</a>.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="flashrom_macbook21">macbook21: How to flash your ROM (if running Apple EFI firmware)</h1>
<div class="important">
<p>
Hover over the next paragraph to make it black.
</p>
<p class="lenovobios">
Following this guide means simply flashing a libreboot ROM. This guide will not (directly) teach you how to make a backup (dump) of the original Apple EFI firmware
because to do so would be to explicitly endorse proprietary software. However, for the purposes of reverse engineering it can be useful
to have a backup. Each copy of the original Apple EFI is (believed, but unproven to be) tied to the specific machine that it came from; it will not (as is believed) run
on any other machine, even if it's the same type of machine as yours. What this means is that, effectively, you can back it up now (so that you can
re-flash it later if you want to run the original Apple EFI firmware again) or lose it forever. The macbook21 installation
guide on the coreboot wiki will show you how to do this:
<a href="http://www.coreboot.org/Board:apple/macbook21">http://www.coreboot.org/Board:apple/macbook21</a>.<br/>
Do not make this decision lightly! This is (very likely) your last and only chance.
</p>
<p>
(this theory is untested at the time of writing)
</p>
<p>
Note: <b>If you have a MacBook1,1 then these instructions will not work. See <a href="#macbook11">#macbook11</a> for MacBook1,1 flashing instructions.</b>
</p>
</div>
<p>
<b>
This is for the MacBook2,1 while running Apple EFI firmware. If you already have
coreboot or libreboot running, then go to <a href="#flashrom">#flashrom</a> instead!
</b>
</p>
<p>
Be sure to read the information in <a href="#macbook21">#macbook21</a>.
</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<div class="important">
<p>
<b>
Before you proceed, make *sure* to build flashrom from source. This is very important!
</b>
</p>
<ul>
<li><a href="#build_flashrom">How to build flashrom from source</a></li>
</ul>
</div>
<p>
Look at <a href="#rom">#rom</a> to see which ROM is suitable for your machine. Alternatively you may be using your own
custom ROM. Adapt.
</p>
<p>
Flashing is actually easy (compared to X60/T60).<br/>
<b>$ sudo flashrom -p internal:laptop=force_I_want_a_brick -w bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
</p>
<p>
Alternatively, a script is provided which does the same thing:<br/>
<b>$ sudo ./macbook21_firstflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
</p>
<div class="important">
<p>
You should also see within the output the following:<br/>
<b>"Verifying flash... VERIFIED."</b>
</p>
<p>
If you see that, great! Shut down now (power off). Wait a few seconds and then boot!
</p>
<p>
<b>
If you boot and you see nothing, try turning up the backlight (F2 for macbook21).
</b>
</p>
</div>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<h1 id="flashrom">X60/X60S/X60T/T60/macbook21: How to flash the ROM's onto your machine (if running libreboot or coreboot already)</h1>
<p>
<b>
These instructions work for the Lenovo ThinkPad X60/X60S/X60T/T60 and Apple MacBook2,1.
</b>
</p>
<p>
<b>
This assumes that you already have coreboot or libreboot running.
</b>
</p>
<p>
<b>
If you have Lenovo BIOS running (X60/X60S/X60T/T60), go to <a href="#flashrom_lenovobios">#flashrom_lenovobios</a> instead.
</b>
</p>
<p>
<b>
If you have Apple EFI firmware running (macbook21), go to <a href="#flashrom_macbook21">#flashrom_macbook21</a> instead.
</b>
</p>
<p>
<b>
If you are flashing a Lenovo ThinkPad T60, be sure to read <a href="#supported_t60_list">#supported_t60_list</a>.
</b>
</p>
<p>
<b>
If you are flashing an Apple MacBook2,1, be sure to read the information in <a href="#macbook21">#macbook21</a>.
</b>
</p>
<p>
First, <a href="#build_dependencies">install the build dependencies</a>.
</p>
<div class="important">
<p>
<b>
Before you proceed, make *sure* to build flashrom from source. This is very important!
</b>
</p>
<ul>
<li><a href="#build_flashrom">How to build flashrom from source</a></li>
</ul>
</div>
<p>
Look at <a href="#rom">#rom</a> to see which ROM is suitable for your machine. Alternative you may be using your own
custom ROM. Adapt.
</p>
<p>
Flash the ROM:<br/>
<b>$ sudo ./flash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
</p>
<div class="important">
<p>
You should see <b>"Verifying flash... VERIFIED."</b> written at the end of the flashrom output. <b>SHUT DOWN</b>
after you see this, and then boot up again after a few seconds.
</p>
<p>
<b>
If you boot and you see nothing, try turning up the backlight (Fn+Home for X60/X60S/X60T/T60, F2 for macbook21).
</b>
</p>
</div>
<p>
Some thinkpads come with WWAN cards installed, along with sim cards. These use non-free firmware and should be removed.
You might also want to remove bluetooth. See <a href="howtos/x60_security.html">x60_security.html</a> and
<a href="howtos/t60_security.html">t60_security.html</a>.
</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="grub_font">Setting font in GRUB (for reference)</h1>
<p>You don't need to do this unless you would like to change the default font yourself.
(this is just for reference. It has already been done for you)</p>
<p>The old font used was Unifont, and this had some missing characters: for instance, the border showed ??? characters instead of lines.</p>
<p>I tried DeJavu Sans Mono from this website:
<a href="http://dejavu-fonts.org/wiki/Download">dejavu-fonts.org</a></p>
<p>Specifically, the version that I chose was the latest at the time of writing (Saturday 21 June 2014):
<a href="http://sourceforge.net/projects/dejavu/files/dejavu/2.34/dejavu-fonts-ttf-2.34.tar.bz2">this one</a></p>
<p>This is a free font that is also contained in GNU/Linux distributions like Trisquel or Parabola.</p>
<p><b>$ cd libreboot_src/grub</b><br/>
compile grub ('build' script has the info on how to do this)<br/>
come back out into libreboot_src/resources/grub:<br/>
<b>$ cd ../libreboot_src/resources/grub/font</b></p>
<p>I took Dejavu Sans Mono from dejavu (included in this version of libreboot) and did:<br/>
<b>$ ../../../grub/grub-mkfont -o dejavusansmono.pf2 ../../../dejavu-fonts-ttf-2.34/ttf/DejaVuSansMono.ttf</b></p>
<p>I then added the instructions to 'build' script to include resources/grub/dejavusansmono.pf2 in all of the ROM's in root of cbfs.<br/>
I then added that instructions to the grub.cfg files (to load the font):<br/>
<b>loadfont (cbfsdisk)/dejavusansmono.pf2</b></p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="grub_keyboard">GRUB keyboard layouts (for reference)</h1>
<h2 id="grub_custom_keyboard">Custom keyboard layout in GRUB (for reference)</h2>
<p>
Keymaps are stored in resources/utilities/grub-assemble/keymap/.
</p>
<p>
Example (French Azerty):<br/>
<b>$ ckbcomp fr > frazerty</b><br/><br/>
Go in grub directory:<br/>
<b>cat frazerty | ./grub/grub-mklayout -o frazerty.gkb</b>
</p>
<p>
You must make sure that the files are named keymap and keymap.gkb (where 'keymap' can be whatever you want).
</p>
<p>
Then from the above example, you would put <b>frazerty</b> in <b>resources/utilities/grub-assemble/keymap/original/</b> and
the <b>frazerty.gkb</b> file goes under <b>resources/utilities/grub-assemble/keymap/</b>
</p>
<p>
The scripts <b>build</b> and <b>buildrom-withgrub</b> will automatically see this, and automatically build
ROM's with your custom layout (given the name) and include them under bin. Example: <b>libreboot_frazerty.rom</b>.
</p>
<p><a href="#pagetop">Back to top of page</a></p>
<h2 id="grub_ukdvorak_keyboard">UK Dvorak keyboard layout in GRUB (for reference)</h2>
<p>
ukdvorak had to be created manually, based on usdvorak. diff them (under resources/utilities/grub-assemble/keymap/original)
to see how ukdvorak file was created
</p>
<b>$ cat ukdvorak | ./grub/grub-mklayout -o ukdvorak.gkb</b></p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="high_pitch_trisquel">High Pitched Whining Noise on Idle (how to remove in Trisquel)</h1>
<p>
Tested in Trisquel 6.
</p>
<p>
Note: untested in Trisquel 7. Remove this note when it is.
</p>
<h2 id="howtouse_powertop">Powertop - how to use</h2>
<p>Now you can use this command to kill that noise:<br/>
<b>$ sudo powertop --auto-tune</b></p>
<p>You can also run it without parameters and then go into 'Tunables' and set everything to 'Good'</p>
<p>Note: On Trisquel 6, you will need to use a later powertop version from git. The one in the repositories is too old. See below:</p>
<h2 id="powertop_autostart">Powertop - Start automatically at boot time (Trisquel 6)</h2>
<p>Included with libreboot is a script called 'powertop.trisquel6'. Run this and it will setup powertop to run with --auto-tune
at boot time. Load the file in your text editor to see how it does that.</p>
<p><b>$ ./powertop.trisquel6</b></p>
<p>This has been tested on Trisquel 6.</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="high_pitch_parabola">High Pitched Whining Noise on Idle (how to remove in Parabola)</h1>
<p>The following removes most of the noise. It reduces what is a high frequency whine
(that not everyone can hear) to a slight buzz (which most people can't hear or doesn't bother most people).</p>
<p>This is not perfect! The full solution is still not discovered but this is a step towards that.
Also, in some instances you will need to run 'sudo powertop --auto-tune' again.
This needs to be implemented properly in coreboot itself!</p>
<p>On the X60 with coreboot or libreboot, there is a high pitched sound when idle.
So far we have use processor.max_cstate=2 or idle=halt in GRUB.
These consume power. Stop using them! </p>
<p>Be root<br/>
<b>$ su -</b></p>
<p>Installed powertop:<br/>
<b># pacman -S powertop</b></p>
<p>and added the following to /etc/systemd/system/powertop.service :</p>
<pre><i>
[Unit]
Description=Powertop tunings
[Service]
Type=oneshot
RemainAfterExit=no
ExecStart=/usr/bin/powertop --auto-tune
# "powertop --auto-tune" still needs a terminal for some reason. Possibly a bug?
Environment="TERM=xterm"
[Install]
WantedBy=multi-user.target
</i></pre>
<p>Finally, as root do that:<br/>
<b># systemctl enable powertop</b><br/>
<b># systemctl start powertop</b></p>
<p>The next time you boot the machine, the buzz will be gone.</p>
<p><a href="#pagetop">Back to top of page</a></p>
<hr/>
<h1 id="serial">X60/T60: Serial port - how to use (for dock owners)</h1>
<p>
For the Thinkpad X60 you can use the <b>"UltraBase X6"</b> dock (for the X60 Tablet it is called
X6 Tablet UltraBase). For the ThinkPad T60,
you can use the <b>"Advanced Mini Dock"</b>.
</p>
<p>
If you are using one of the ROM's with 'serial' in the name, then you have serial port enabled in libreboot
and you have memtest86+ included inside the ROM. Connect your null modem cable to the serial port on the dock
and connect the other end to a 2nd machine using your USB Serial adapter.
</p>
<p>
On the 2nd machine, you can try this (using GNU Screen):<br/>
<b>$ sudo screen /dev/ttyUSB0 115200</b>
</p>
<p>
How to quit GNU Screen: Ctrl+A then release and press K, and then press Y.
</p>
<p>There are also others like Minicom but I like GNU Screen</p>
<p>
By doing this before booting the X60/T60, you will see console output from libreboot. You will also see
GRUB displaying on the serial output, and you will be able to see MemTest86+ on the serial output aswell.
You can also configure your distro so that a terminal (TTY) is accessible from the serial console.
</p>
<p>
The following guide is for Ubuntu, and can be followed for Trisquel 6.0 which is based on Ubuntu 12.04
(should also work in Trisquel 7, based on Ubuntu 14.04) to enable a serial console using GeTTY:<br/>
<a href="https://help.ubuntu.com/community/SerialConsoleHowto" target="_blank">https://help.ubuntu.com/community/SerialConsoleHowto</a>
</p>
<p>
Note: part of the tutorial above requires changing your grub.cfg. Just change the <b>linux</b> line to add instructions for enabling getty.
See <a href="howtos/grub_cbfs.html">howtos/grub_cbfs.html</a>.
</p>
<p><a href="#pagetop">Back to top of page</a>
<hr/>
<h1 id="get_edid_panelname">Get EDID: Find out the name (model) of your LCD panel</h1>
<p>
Get the panel name with <b>sudo get-edid | strings</b><br/>
Or look in <b>/sys/class/drm/card0-LVDS-1/edid</b>
</p>
<p>
Alternatively you can use i2cdump. In Trisquel, this is in the package i2c-tools.<br/>
$ <b>sudo modprobe i2c-dev</b><br/>
$ <b>sudo i2cdump -y 5 0x50</b><br/>
$ <b>sudo rmmod i2c-dev</b><br/>
You'll see the panel name in the output (from the EDID dump).
</p>
<p>
If neither of these options work (or they are unavailable), physically removing the LCD panel is an option.
Usually, there will be information printed on the back.
</p>
<p><a href="#pagetop">Back to top of page.</a></p>
<hr/>
<p>
Copyright © 2014 Francis Rowe <info@gluglug.org.uk><br/>
This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
A copy of the license can be found at <a href="license.txt">license.txt</a>.
</p>
<p>
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="license.txt">license.txt</a> for more information.
</p>
</body>
</html>
|
