Update more supplementary build scripts

Signed-off-by: Dan McGee <dan@archlinux.org>

4 files changed, 240 insertions, 167 deletions

diff --git a/depcomp b/depcomp
index ca5ea4e1..df8eea7e 100755
--- a/depcomp
+++ b/depcomp
@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@ scriptversion=2006-10-15.18
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -87,6 +85,15 @@ if test "$depmode" = dashXmstdout; then
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -192,14 +199,14 @@ sgi)
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -215,34 +222,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -323,7 +335,12 @@ hp2)
   if test -f "$tmpdepfile"; then
     sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
   else
     echo "#dummy" > "$depfile"
   fi
@@ -399,7 +416,7 @@ dashmstdout)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -450,32 +467,39 @@ makedepend)
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -495,7 +519,7 @@ cpp)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -533,13 +557,27 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -552,16 +590,23 @@ msvisualcpp)
 	;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -580,5 +625,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/install-sh b/install-sh
index 4fbbae7b..3f83ce9b 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-10-14.15
+scriptversion=2010-02-06.18; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" ""	$nl"
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
 if test -z "$doit"; then
   doit_exec=exec
 else
@@ -58,34 +58,49 @@ fi
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-posix_glob=
 posix_mkdir=
 
 # Desired mode of installed file.
 mode=0755
 
+chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,65 +110,55 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
 while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
+
+    -C) copy_on_change=true;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-        shift
-        shift
 	case $mode in
 	  *' '* | *'	'* | *'
 '*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
-        continue;;
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
@@ -165,21 +170,22 @@ while test $# -ne 0; do
 
     *)  break;;
   esac
+  shift
 done
 
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
   # Otherwise, the last argument is the destination.  Remove it from $@.
   for arg
   do
-    if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
       # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
       shift # fnord
     fi
     shift # arg
-    dstarg=$arg
+    dst_arg=$arg
   done
 fi
 
@@ -194,7 +200,11 @@ if test $# -eq 0; then
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -224,7 +234,7 @@ for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -242,22 +252,22 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
       dstdir=$dst
@@ -378,26 +388,19 @@ do
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
       esac
 
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
+      eval "$initialize_posix_glob"
 
       oIFS=$IFS
       IFS=/
-      $posix_glob && set -f
+      $posix_glob set -f
       set fnord $dstdir
       shift
-      $posix_glob && set +f
+      $posix_glob set +f
       IFS=$oIFS
 
       prefixes=
@@ -459,41 +462,54 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
 
     trap '' 0
   fi
@@ -503,5 +519,6 @@ done
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/missing b/missing
index 1c8ff704..28055d2a 100755
--- a/missing
+++ b/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2006-05-10.23
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@ scriptversion=2006-05-10.23
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -89,6 +87,9 @@ Supported PROGRAM values:
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
     ;;
@@ -106,15 +107,22 @@ Send bug reports to <bug-automake@gnu.org>."
 
 esac
 
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
-# the program).
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
 case $1 in
-  lex|yacc)
+  lex*|yacc*)
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar)
+  tar*)
     if test -n "$run"; then
        echo 1>&2 "ERROR: \`tar' requires --run"
        exit 1
@@ -138,7 +146,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case $1 in
+case $program in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -148,7 +156,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch aclocal.m4
     ;;
 
-  autoconf)
+  autoconf*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -157,7 +165,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch configure
     ;;
 
-  autoheader)
+  autoheader*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -187,7 +195,7 @@ WARNING: \`$1' is $msg.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
+  autom4te*)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -210,7 +218,7 @@ WARNING: \`$1' is needed, but is $msg.
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
@@ -240,7 +248,7 @@ WARNING: \`$1' $msg.  You should only need it if
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
@@ -263,7 +271,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     ;;
 
-  help2man)
+  help2man*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
@@ -277,11 +285,11 @@ WARNING: \`$1' is $msg.  You should only need it if
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
+  makeinfo*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -310,7 +318,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
 
     # We have already tried tar in the generic part.
@@ -363,5 +371,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/mkinstalldirs b/mkinstalldirs
index ef7e16fd..4191a45d 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -1,7 +1,7 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
 
-scriptversion=2006-05-11.19
+scriptversion=2009-04-28.21; # UTC
 
 # Original author: Noah Friedman <friedman@prep.ai.mit.edu>
 # Created: 1993-05-16
@@ -157,5 +157,6 @@ exit $errstatus
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End: