uboot-pandaboard-linux-libre: add new package to [libre]

1 files changed, 141 insertions, 0 deletions

diff --git a/libre/uboot-pandaboard-linux-libre/0001-parabola-arm-modifications.patch b/libre/uboot-pandaboard-linux-libre/0001-parabola-arm-modifications.patch
new file mode 100644
index 000000000..01c7ca80a
--- /dev/null
+++ b/libre/uboot-pandaboard-linux-libre/0001-parabola-arm-modifications.patch
@@ -0,0 +1,141 @@
+diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
+index 1c93aab..e8b6c90 100644
+--- a/include/configs/ti_omap4_common.h
++++ b/include/configs/ti_omap4_common.h
+@@ -46,7 +46,6 @@
+  * the timings to use or use pre-determined timings (based on using the
+  * dynamic method.  Default to the static timing infomation.
+  */
+-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+ #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+ #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+@@ -82,6 +81,12 @@
+ #undef CONFIG_CMD_NET
+ #undef CONFIG_CMD_NFS
+ 
++/* Parabola GNU/Linux-libre extras */
++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
++#define CONFIG_SUPPORT_RAW_INITRD
++#define CONFIG_CMD_PART
++#define CONFIG_PARTITION_UUIDS
++
+ /*
+  * Environment setup
+  */
+@@ -89,32 +94,57 @@
+ 	DEFAULT_LINUX_BOOT_ENV \
+ 	"console=ttyO2,115200n8\0" \
+ 	"fdtfile=undefined\0" \
+-	"bootpart=0:2\0" \
++	"bootpart=0:1\0" \
+ 	"bootdir=/boot\0" \
+-	"bootfile=zImage\0" \
++	"fdtdir=/boot/dtbs/linux-libre\0" \
++	"bootfile=vmlinuz-linux-libre\0" \
++	"rdfile=initramfs-linux-libre.img\0" \
+ 	"usbtty=cdc_acm\0" \
+ 	"vram=16M\0" \
+ 	"mmcdev=0\0" \
+-	"mmcroot=/dev/mmcblk0p2 rw\0" \
+-	"mmcrootfstype=ext3 rootwait\0" \
++	"optargs=\0" \
++	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
+ 		"vram=${vram} " \
+-		"root=${mmcroot} " \
+-		"rootfstype=${mmcrootfstype}\0" \
+-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+-		"source ${loadaddr}\0" \
+-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+-		"env import -t ${loadaddr} ${filesize}\0" \
+-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+-	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
+-	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
+-		"run mmcargs; " \
+-		"bootz ${loadaddr} - ${fdtaddr}\0" \
+-	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
+-		"run mmcargs; " \
+-		"bootm ${loadaddr}\0" \
++		"root=${root} " \
++		"${optargs}\0" \
++	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
++	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++	"mmcboot=usb start;" \
++		"for devtype in mmc usb; do " \
++			"setenv devnum 0;" \
++			"while ${devtype} dev ${devnum}; do " \
++				"echo ${devtype} found on device ${devnum};" \
++				"setenv bootpart ${devnum}:1;" \
++				"part uuid ${devtype} ${bootpart} uuid;" \
++				"setenv root PARTUUID=${uuid} rw rootwait;" \
++				"echo Checking for: ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt ...;" \
++				"if test -e ${devtype} ${bootpart} ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt; then " \
++					"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt;" \
++					"env import -t ${loadaddr} ${filesize};" \
++					"echo Loaded environment from ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt;" \
++					"echo Checking if uenvcmd is set ...;" \
++					"if test -n ${uenvcmd}; then " \
++						"echo Running uenvcmd ...;" \
++						"run uenvcmd;" \
++					"fi;" \
++				"fi;" \
++				"if run loadimage; then " \
++					"run mmcargs;" \
++					"if run loadfdt; then " \
++						"if run loadrd; then " \
++							"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++						"else " \
++							"bootz ${loadaddr} - ${fdtaddr};" \
++						"fi;" \
++					"fi;" \
++				"else " \
++					"echo No kernel found;" \
++				"fi;" \
++				"setexpr devnum ${devnum} + 1;" \
++			"done;" \
++		"done;\0" \
+ 	"findfdt="\
+ 		"if test $board_name = sdp4430; then " \
+ 			"setenv fdtfile omap4-sdp.dtb; fi; " \
+@@ -127,32 +157,11 @@
+ 		"if test $board_name = duovero; then " \
+ 			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
+ 		"if test $fdtfile = undefined; then " \
+-			"echo WARNING: Could not determine device tree to use; fi; \0" \
+-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
++			"echo WARNING: Could not determine device tree to use; fi; \0"
+ 
+ #define CONFIG_BOOTCOMMAND \
+ 	"run findfdt; " \
+-	"mmc dev ${mmcdev}; if mmc rescan; then " \
+-		"echo SD/MMC found on device ${mmcdev};" \
+-		"if run loadbootscript; then " \
+-			"run bootscript; " \
+-		"else " \
+-			"if run loadbootenv; then " \
+-				"run importbootenv; " \
+-			"fi;" \
+-			"if test -n ${uenvcmd}; then " \
+-				"echo Running uenvcmd ...;" \
+-				"run uenvcmd;" \
+-			"fi;" \
+-		"fi;" \
+-		"if run loadimage; then " \
+-			"run loadfdt;" \
+-			"run mmcboot; " \
+-		"fi; " \
+-		"if run loaduimage; then " \
+-			"run uimageboot;" \
+-		"fi; " \
+-	"fi"
++	"run mmcboot"
+ 
+ /*
+  * Defines for SPL
+-- 
+2.4.2
+