diff options
Diffstat (limited to 'libre-testing/linux-libre/0008-USB-armory-support.patch')
| -rw-r--r-- | libre-testing/linux-libre/0008-USB-armory-support.patch | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/libre-testing/linux-libre/0008-USB-armory-support.patch b/libre-testing/linux-libre/0008-USB-armory-support.patch new file mode 100644 index 000000000..13b415604 --- /dev/null +++ b/libre-testing/linux-libre/0008-USB-armory-support.patch @@ -0,0 +1,329 @@ +From ac49b5026524acf13cbdeef8d5f72257aef3e31d Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich <kevin@archlinuxarm.org> +Date: Sat, 7 Mar 2015 16:51:15 -0700 +Subject: [PATCH 8/8] USB armory support + +--- + arch/arm/boot/dts/Makefile | 3 + + arch/arm/boot/dts/imx53-usbarmory-common.dtsi | 209 ++++++++++++++++++++++++++ + arch/arm/boot/dts/imx53-usbarmory-gpio.dts | 26 ++++ + arch/arm/boot/dts/imx53-usbarmory-host.dts | 18 +++ + arch/arm/boot/dts/imx53-usbarmory.dts | 18 +++ + 5 files changed, 274 insertions(+) + create mode 100644 arch/arm/boot/dts/imx53-usbarmory-common.dtsi + create mode 100644 arch/arm/boot/dts/imx53-usbarmory-gpio.dts + create mode 100644 arch/arm/boot/dts/imx53-usbarmory-host.dts + create mode 100644 arch/arm/boot/dts/imx53-usbarmory.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 5586e7a..d54f5f7 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -264,6 +264,9 @@ dtb-$(CONFIG_SOC_IMX53) += \ + imx53-smd.dtb \ + imx53-tx53-x03x.dtb \ + imx53-tx53-x13x.dtb \ ++ imx53-usbarmory.dtb \ ++ imx53-usbarmory-gpio.dtb \ ++ imx53-usbarmory-host.dtb \ + imx53-voipac-bsb.dtb + dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-apf6dev.dtb \ +diff --git a/arch/arm/boot/dts/imx53-usbarmory-common.dtsi b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi +new file mode 100644 +index 0000000..c7cbd84 +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi +@@ -0,0 +1,209 @@ ++/* ++ * USB armory MkI device tree include file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++#include "imx53.dtsi" ++ ++/ { ++ model = "Inverse Path USB armory"; ++ compatible = "inversepath,imx53-usbarmory", "fsl,imx53"; ++}; ++ ++/ { ++ chosen { ++ stdout-path = &uart1; ++ }; ++ ++ memory { ++ reg = <0x70000000 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pin_gpio4_27>; ++ ++ user { ++ label = "LED"; ++ gpios = <&gpio4 27 0>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ }; ++ ++ soc { ++ aips@60000000 { ++ sahara: crypto@63ff8000 { ++ compatible = "fsl,imx53-sahara"; ++ reg = <0x63ff8000 0x4000>; ++ interrupts = <19 20>; ++ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, ++ <&clks IMX5_CLK_SAHARA_IPG_GATE>; ++ clock-names = "ipg", "ahb"; ++ }; ++ }; ++ }; ++}; ++ ++&cpu0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a8"; ++ reg = <0x0>; ++ clocks = <&clks IMX5_CLK_ARM>; ++ clock-latency = <61036>; ++ voltage-tolerance = <5>; ++ operating-points = < ++ /* kHz */ ++ 166666 850000 ++ 400000 900000 ++ 800000 1050000 ++ >; ++}; ++ ++&esdhc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_esdhc1>; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-names = "default"; ++ ++ imx53-usbarmory { ++ pinctrl_pinheader: pinheadergrp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0 ++ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0 ++ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0 ++ >; ++ }; ++ ++ led_pin_gpio4_27: led_gpio4_27@0 { ++ fsl,pins = < ++ MX53_PAD_DISP0_DAT6__GPIO4_27 0x80000000 ++ >; ++ }; ++ ++ pinctrl_esdhc1: esdhc1grp { ++ fsl,pins = < ++ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 ++ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 ++ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 ++ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 ++ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 ++ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 ++ >; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 ++ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 ++ >; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 ++ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 ++ >; ++ }; ++ pinctrl_gpio5: gpio5grp { ++ fsl,pins = < ++ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0 ++ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0 ++ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0 ++ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0 ++ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0 ++ >; ++ }; ++ }; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++&vpu { ++ status = "okay"; ++}; ++ ++&i2c1 { ++ ltc3589: pmic@34 { ++ compatible = "lltc,ltc3589-2"; ++ reg = <0x34>; ++ ++ regulators { ++ sw1_reg: sw1 { ++ regulator-min-microvolt = <591930>; ++ regulator-max-microvolt = <1224671>; ++ lltc,fb-voltage-divider = <100000 158000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <704123>; ++ regulator-max-microvolt = <1456803>; ++ lltc,fb-voltage-divider = <180000 191000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3_reg: sw3 { ++ regulator-min-microvolt = <1341250>; ++ regulator-max-microvolt = <2775000>; ++ lltc,fb-voltage-divider = <270000 100000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ bb_out_reg: bb-out { ++ regulator-min-microvolt = <3387341>; ++ regulator-max-microvolt = <3387341>; ++ lltc,fb-voltage-divider = <511000 158000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ldo1_reg: ldo1 { ++ regulator-min-microvolt = <1306329>; ++ regulator-max-microvolt = <1306329>; ++ lltc,fb-voltage-divider = <100000 158000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo2_reg: ldo2 { ++ regulator-min-microvolt = <704123>; ++ regulator-max-microvolt = <1456806>; ++ lltc,fb-voltage-divider = <180000 191000>; ++ regulator-ramp-delay = <7000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ ldo3_reg: ldo3 { ++ regulator-min-microvolt = <2800000>; ++ regulator-max-microvolt = <2800000>; ++ regulator-boot-on; ++ }; ++ ++ ldo4_reg: ldo4 { ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <3200000>; ++ }; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx53-usbarmory-gpio.dts b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts +new file mode 100644 +index 0000000..bf85ffa +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts +@@ -0,0 +1,26 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&iomuxc { ++ pinctrl-0 = <&pinctrl_pinheader>; ++}; ++ ++&uart1 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/imx53-usbarmory-host.dts b/arch/arm/boot/dts/imx53-usbarmory-host.dts +new file mode 100644 +index 0000000..ea2ea45 +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory-host.dts +@@ -0,0 +1,18 @@ ++/* ++ * USB armory MkI host mode device tree file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "host"; ++ status = "okay"; ++}; +diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts +new file mode 100644 +index 0000000..902a73b +--- /dev/null ++++ b/arch/arm/boot/dts/imx53-usbarmory.dts +@@ -0,0 +1,18 @@ ++/* ++ * USB armory MkI device mode device tree file ++ * http://inversepath.com/usbarmory ++ * ++ * Copyright (C) 2015, Inverse Path ++ * Andrej Rosano <andrej@inversepath.com> ++ * ++ * Licensed under GPLv2 ++ */ ++ ++/dts-v1/; ++ ++#include "imx53-usbarmory-common.dtsi" ++ ++&usbotg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; +-- +2.4.5 + |