diff options
Diffstat (limited to 'libre/kernel26-libre-lts/kernel26-libre-lts.install')
| -rw-r--r-- | libre/kernel26-libre-lts/kernel26-libre-lts.install | 146 |
1 files changed, 0 insertions, 146 deletions
diff --git a/libre/kernel26-libre-lts/kernel26-libre-lts.install b/libre/kernel26-libre-lts/kernel26-libre-lts.install deleted file mode 100644 index 0e4b44fa3..000000000 --- a/libre/kernel26-libre-lts/kernel26-libre-lts.install +++ /dev/null @@ -1,146 +0,0 @@ -# arg 1: the new package version -# arg 2: the old package version - -KERNEL_NAME=-lts -KERNEL_VERSION=2.6.32.50-1-lts - -post_install () { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - /sbin/depmod $KERNEL_VERSION - # generate init ramdisks - echo ">>> MKINITCPIO SETUP" - echo ">>> ----------------" - echo ">>> If you use LVM2, Encrypted root or software RAID," - echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ." - echo ">>> More information about mkinitcpio setup can be found here:" - echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio" - echo "" - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p kernel26${KERNEL_NAME} -} - -post_upgrade() { - pacman -Q grub &>/dev/null - hasgrub=$? - pacman -Q grub2 &>/dev/null - hasgrub2=$? - pacman -Q lilo &>/dev/null - haslilo=$? - # reminder notices - if [ $haslilo -eq 0 ]; then - echo ">>>" - if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then - echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting." - else - echo ">>> You appear to be using the LILO bootloader. You should run" - echo ">>> 'lilo' before rebooting." - fi - echo ">>>" - fi - - if grep "/boot" /etc/fstab 2>&1 >/dev/null; then - if ! grep "/boot" /etc/mtab 2>&1 >/dev/null; then - echo "WARNING: /boot appears to be a seperate partition but is not mounted." - echo " You probably just broke your system. Congratulations." - fi - fi - - if [ "`vercmp $2 2.6.13`" -lt 0 ]; then - # important upgrade notice - echo ">>>" - echo ">>> IMPORTANT KERNEL UPGRADE NOTICE" - echo ">>> -------------------------------" - echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!" - echo ">>> If you still use DevFS, please make the transition to uDev before" - echo ">>> rebooting. If you really need to stay with DevFS for some reason," - echo ">>> then you can manually downgrade to an older version:" - echo ">>>" - echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz" - echo ">>>" - echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your" - echo ">>> IgnorePkg list in /etc/pacman.conf" - echo ">>>" - echo ">>> (NOTE: The following portion applies to uDev users as well!)" - echo ">>>" - echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not" - echo ">>> be able to boot! Change your root= parameter to use the classic" - echo ">>> naming scheme." - echo ">>>" - echo ">>> EXAMPLES:" - echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3" - echo ">>> - change root=/dev/md/0 to root=/dev/md0" - echo ">>>" - fi - # generate new init ramdisk - if [ "`vercmp $2 2.6.18`" -lt 0 ]; then - echo ">>> --------------------------------------------------------------" - echo ">>> | WARNING: |" - echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|" - echo ">>> | Please change to Mkinitcpio setup. |" - echo ">>> --------------------------------------------------------------" - echo ">>>" - fi - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - /sbin/depmod $KERNEL_VERSION - echo ">>> MKINITCPIO SETUP" - echo ">>> ----------------" - if [ "`vercmp $2 2.6.18`" -lt 0 ]; then - echo ">>> Please change your bootloader config files:" - echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf" - echo "------------------------------------------------" - echo "| - initrd26.img to kernel26${KERNEL_NAME}.img |" - echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |" - echo "------------------------------------------------" - fi - if [ "`vercmp $2 2.6.19`" -lt 0 ]; then - echo "" - echo ">>> New PATA/IDE subsystem - EXPERIMENTAL" - echo ">>> ----------" - echo ">>> To use the new pata drivers, change the 'ide' hook " - echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS=" - echo ">>> The new system changes: /dev/hd? to /dev/sd?" - echo ">>> Don't forget to modify GRUB, LILO and fstab to the" - echo ">>> new naming system. " - echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8" - echo "" - echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT" - echo "----------" - echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf" - echo ">>> the 'ata_piix' module will be used." - echo ">>> This may cause your devices to shift names, eg:" - echo ">>> - IDE: devices from hd? to sd?" - echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port." - echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix" - echo "" - fi - - echo ">>> If you use LVM2, Encrypted root or software RAID," - echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ." - echo ">>> More information about mkinitcpio setup can be found here:" - echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio" - echo "" - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." -if [ "`vercmp $2 2.6.19`" -lt 0 ]; then - mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below -and are using an Intel chipset, append 'earlymodules=piix' to the -kernel commandline" -else - mkinitcpio -p kernel26${KERNEL_NAME} -fi -if [ "`vercmp $2 2.6.21`" -lt 0 ]; then - echo "" - echo "Important ACPI Information:" - echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized." - echo ">>> The modules are located at:" - echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi" - echo ">>> For more information about ACPI modules check this wiki page:" - echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'" -fi -} - -post_remove() { - rm -f /boot/kernel26${KERNEL_NAME}.img - rm -f /boot/kernel26${KERNEL_NAME}-fallback.img -} |