summaryrefslogtreecommitdiff
path: root/libre
diff options
context:
space:
mode:
Diffstat (limited to 'libre')
-rw-r--r--libre/uboot-beagleboard-linux-libre-grsec/0001-parabola-arm-modifications.patch308
-rw-r--r--libre/uboot-beagleboard-linux-libre-grsec/PKGBUILD43
-rw-r--r--libre/uboot-beagleboard-linux-libre-grsec/uEnv.txt0
-rw-r--r--libre/uboot-beagleboard-linux-libre-lts/0001-parabola-arm-modifications.patch308
-rw-r--r--libre/uboot-beagleboard-linux-libre-lts/PKGBUILD43
-rw-r--r--libre/uboot-beagleboard-linux-libre-lts/uEnv.txt0
-rw-r--r--libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch308
-rw-r--r--libre/uboot-beagleboard-linux-libre-pck/PKGBUILD44
-rw-r--r--libre/uboot-beagleboard-linux-libre-pck/uEnv.txt0
-rw-r--r--libre/uboot-udoo-linux-libre-grsec/0001-parabola-arm-modifications.patch391
-rw-r--r--libre/uboot-udoo-linux-libre-grsec/0002-kernel-add-support-for-gcc-5.patch97
-rw-r--r--libre/uboot-udoo-linux-libre-grsec/PKGBUILD61
-rw-r--r--libre/uboot-udoo-linux-libre-grsec/uboot-udoo-dual-linux-libre-grsec.install23
-rw-r--r--libre/uboot-udoo-linux-libre-grsec/uboot-udoo-quad-linux-libre-grsec.install23
14 files changed, 0 insertions, 1649 deletions
diff --git a/libre/uboot-beagleboard-linux-libre-grsec/0001-parabola-arm-modifications.patch b/libre/uboot-beagleboard-linux-libre-grsec/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 1cc6d8842..000000000
--- a/libre/uboot-beagleboard-linux-libre-grsec/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,308 +0,0 @@
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 7b37fbe..ff986ff 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@ int misc_init_r(void)
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@ int misc_init_r(void)
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -473,6 +477,30 @@ int misc_init_r(void)
- if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
- twl4030_power_init();
- switch (get_board_revision()) {
- case REVISION_XM_AB:
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index f25a940..9f15cf1 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -90,6 +90,12 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -129,50 +135,62 @@
- /* devices */
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-+ "loadaddr=0x82000000\0" \
-+ "rdaddr=0x88080000\0" \
- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "fdtaddr=0x88000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=/\0" \
-+ "fdtdir=/dtbs/linux-libre-grsec\0" \
-+ "bootfile=vmlinuz-linux-libre-grsec\0" \
-+ "rdfile=initramfs-linux-libre-grsec.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
-@@ -185,81 +203,11 @@
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-+
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
---
-2.4.2
-
diff --git a/libre/uboot-beagleboard-linux-libre-grsec/PKGBUILD b/libre/uboot-beagleboard-linux-libre-grsec/PKGBUILD
deleted file mode 100644
index ec5471ad5..000000000
--- a/libre/uboot-beagleboard-linux-libre-grsec/PKGBUILD
+++ /dev/null
@@ -1,43 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org>
-# Contributor: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-_pkgname=linux-libre-grsec
-pkgname=uboot-beagleboard-${_pkgname}
-pkgver=2015.04
-pkgrel=1
-pkgdesc="U-Boot for BeagleBoard and BeagleBoard-xM (built for the linux-libre-grsec kernel package)"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-depends=('linux-libre-grsec')
-makedepends=('bc')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- '444b1c5391852a1e2b5fc43409cd2e8a'
- 'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}/boot/${pkgname}"
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}/boot/${pkgname}"
-}
diff --git a/libre/uboot-beagleboard-linux-libre-grsec/uEnv.txt b/libre/uboot-beagleboard-linux-libre-grsec/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre/uboot-beagleboard-linux-libre-grsec/uEnv.txt
+++ /dev/null
diff --git a/libre/uboot-beagleboard-linux-libre-lts/0001-parabola-arm-modifications.patch b/libre/uboot-beagleboard-linux-libre-lts/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 5aad9446a..000000000
--- a/libre/uboot-beagleboard-linux-libre-lts/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,308 +0,0 @@
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 7b37fbe..ff986ff 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@ int misc_init_r(void)
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@ int misc_init_r(void)
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -473,6 +477,30 @@ int misc_init_r(void)
- if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
- twl4030_power_init();
- switch (get_board_revision()) {
- case REVISION_XM_AB:
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index f25a940..9f15cf1 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -90,6 +90,12 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -129,50 +135,62 @@
- /* devices */
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-+ "loadaddr=0x82000000\0" \
-+ "rdaddr=0x88080000\0" \
- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "fdtaddr=0x88000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=/\0" \
-+ "fdtdir=/dtbs/linux-libre-lts\0" \
-+ "bootfile=vmlinuz-linux-libre-lts\0" \
-+ "rdfile=initramfs-linux-libre-lts.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
-@@ -185,81 +203,11 @@
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-+
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
---
-2.4.2
-
diff --git a/libre/uboot-beagleboard-linux-libre-lts/PKGBUILD b/libre/uboot-beagleboard-linux-libre-lts/PKGBUILD
deleted file mode 100644
index 0da6d91b5..000000000
--- a/libre/uboot-beagleboard-linux-libre-lts/PKGBUILD
+++ /dev/null
@@ -1,43 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org>
-# Contributor: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-_pkgname=linux-libre-lts
-pkgname=uboot-beagleboard-${_pkgname}
-pkgver=2015.04
-pkgrel=1
-pkgdesc="U-Boot for BeagleBoard and BeagleBoard-xM (built for the linux-libre-lts kernel package)"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-depends=('linux-libre-lts')
-makedepends=('bc')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- 'a942ca56e4389168d6627fa2f2fd55fa'
- 'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}/boot/${pkgname}"
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}/boot/${pkgname}"
-}
diff --git a/libre/uboot-beagleboard-linux-libre-lts/uEnv.txt b/libre/uboot-beagleboard-linux-libre-lts/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre/uboot-beagleboard-linux-libre-lts/uEnv.txt
+++ /dev/null
diff --git a/libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch b/libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 699a167f0..000000000
--- a/libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,308 +0,0 @@
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 7b37fbe..ff986ff 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@ int misc_init_r(void)
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@ int misc_init_r(void)
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -473,6 +477,30 @@ int misc_init_r(void)
- if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
- twl4030_power_init();
- switch (get_board_revision()) {
- case REVISION_XM_AB:
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index f25a940..9f15cf1 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -90,6 +90,12 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -129,50 +135,62 @@
- /* devices */
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-+ "loadaddr=0x82000000\0" \
-+ "rdaddr=0x88080000\0" \
- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "fdtaddr=0x88000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=/\0" \
-+ "fdtdir=/dtbs/linux-libre-pck\0" \
-+ "bootfile=vmlinuz-linux-libre-pck\0" \
-+ "rdfile=initramfs-linux-libre-pck.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
-@@ -185,81 +203,11 @@
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-+
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
---
-2.4.2
-
diff --git a/libre/uboot-beagleboard-linux-libre-pck/PKGBUILD b/libre/uboot-beagleboard-linux-libre-pck/PKGBUILD
deleted file mode 100644
index d5bfa4a10..000000000
--- a/libre/uboot-beagleboard-linux-libre-pck/PKGBUILD
+++ /dev/null
@@ -1,44 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org>
-# Contributor: André Silva <emulatorman@parabola.nu>
-# Contributor: Isaac David <isacdaavid@isacdaavid.info>
-
-buildarch=4
-
-_pkgname=linux-libre-pck
-pkgname=uboot-beagleboard-${_pkgname}
-pkgver=2015.04
-pkgrel=1
-pkgdesc="U-Boot for BeagleBoard and BeagleBoard-xM (built for the linux-libre-pck kernel package)"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-depends=('linux-libre-pck')
-makedepends=('bc')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- '4d4fd0e33ddd334a79e1e85c5b418b35'
- 'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}/boot/${pkgname}"
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}/boot/${pkgname}"
-}
diff --git a/libre/uboot-beagleboard-linux-libre-pck/uEnv.txt b/libre/uboot-beagleboard-linux-libre-pck/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre/uboot-beagleboard-linux-libre-pck/uEnv.txt
+++ /dev/null
diff --git a/libre/uboot-udoo-linux-libre-grsec/0001-parabola-arm-modifications.patch b/libre/uboot-udoo-linux-libre-grsec/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 01c3813b3..000000000
--- a/libre/uboot-udoo-linux-libre-grsec/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,391 +0,0 @@
-diff --git a/board/udoo/1066mhz_4x256mx16_dl.cfg b/board/udoo/1066mhz_4x256mx16_dl.cfg
-new file mode 100644
-index 0000000..e37c9f9
---- /dev/null
-+++ b/board/udoo/1066mhz_4x256mx16_dl.cfg
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+
-+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
-+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040
-+
-+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3
-+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63
-+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-+
-+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
-+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-+
-+
-+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
-+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
-+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
-+
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-+
-+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
-+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
-+
-+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
-+
-+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
-+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
-+
-+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251
-+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200
-+
-+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45
-+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744
-+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336
-+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630
-+
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
-+
-+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000
-+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000
-+
-+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
-+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-diff --git a/board/udoo/ddr-setup_dl.cfg b/board/udoo/ddr-setup_dl.cfg
-new file mode 100644
-index 0000000..487570e
---- /dev/null
-+++ b/board/udoo/ddr-setup_dl.cfg
-@@ -0,0 +1,84 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Device Configuration Data (DCD)
-+ *
-+ * Each entry must have the format:
-+ * Addr-type Address Value
-+ *
-+ * where:
-+ * Addr-type register length (1,2 or 4 bytes)
-+ * Address absolute address of the register
-+ * value value to be stored in the register
-+ */
-+
-+/*
-+ * DDR3 settings
-+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
-+ * memory bus width: 64 bits x16/x32/x64
-+ * MX6DL ddr is limited to 800 MHz(400 MHz clock)
-+ * memory bus width: 64 bits x16/x32/x64
-+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
-+ * memory bus width: 32 bits x16/x32
-+ */
-+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028
-+
-+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028
-+
-+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028
-+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028
-+
-+/* (differential input) */
-+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
-+/* (differential input) */
-+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
-+/* disable ddr pullups */
-+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
-+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
-+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
-+
-+/* Read data DQ Byte0-3 delay */
-+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
-diff --git a/board/udoo/udoo-dl.cfg b/board/udoo/udoo-dl.cfg
-new file mode 100644
-index 0000000..46953c1
---- /dev/null
-+++ b/board/udoo/udoo-dl.cfg
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup_dl.cfg"
-+#include "1066mhz_4x256mx16_dl.cfg"
-+#include "clocks.cfg"
-diff --git a/configs/udoo_dl_defconfig b/configs/udoo_dl_defconfig
-new file mode 100644
-index 0000000..5dc9016
---- /dev/null
-+++ b/configs/udoo_dl_defconfig
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
-+CONFIG_ARM=y
-+CONFIG_TARGET_UDOO=y
-diff --git a/include/configs/udoo.h b/include/configs/udoo.h
-index 700e9c1..7fdce0f 100644
---- a/include/configs/udoo.h
-+++ b/include/configs/udoo.h
-@@ -78,7 +78,7 @@
- #define CONFIG_CMD_BMODE
- #define CONFIG_CMD_SETEXPR
-
--#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTDELAY 1
-
- #define CONFIG_SYS_MEMTEST_START 0x10000000
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -96,60 +96,97 @@
- #define CONFIG_BOUNCE_BUFFER
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
-
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb"
-+#elif defined(CONFIG_MX6Q)
- #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb"
-+#endif
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "script=boot.scr\0" \
-- "image=zImage\0" \
-- "console=ttymxc1\0" \
-+ "bootfile=vmlinuz-linux-libre-grsec\0" \
-+ "bootdir=/boot\0" \
-+ "console=ttymxc1,115200\0" \
- "splashpos=m,m\0" \
- "fdt_high=0xffffffff\0" \
-+ "rdaddr=0x12A00000\0" \
-+ "rdfile=initramfs-linux-libre-grsec.img\0" \
- "initrd_high=0xffffffff\0" \
-- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-- "fdt_addr=0x18000000\0" \
-- "boot_fdt=try\0" \
-+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-+ "fdtdir=/boot/dtbs/linux-libre-grsec\0" \
-+ "fdtaddr=0x18000000\0" \
- "ip_dyn=yes\0" \
-+ "optargs=\0" \
-+ "video=\0" \
- "mmcdev=0\0" \
-- "mmcpart=1\0" \
-- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-- "update_sd_firmware_filename=u-boot.imx\0" \
-- "update_sd_firmware=" \
-- "if test ${ip_dyn} = yes; then " \
-- "setenv get_cmd dhcp; " \
-+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
-+ "mmcargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${mmcroot} " \
-+ "video=${video}\0" \
-+ "videoargs=" \
-+ "setenv nextcon 0; " \
-+ "if hdmidet; then " \
-+ "setenv bootargs ${bootargs} " \
-+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-+ "if=RGB24; " \
-+ "setenv fbmem fbmem=28M; " \
-+ "setexpr nextcon ${nextcon} + 1; " \
- "else " \
-- "setenv get_cmd tftp; " \
-+ "echo - no HDMI monitor;" \
- "fi; " \
-- "if mmc dev ${mmcdev}; then " \
-- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
-- "setexpr fw_sz ${filesize} / 0x200; " \
-- "setexpr fw_sz ${fw_sz} + 1; " \
-- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-- "fi; " \
-- "fi\0" \
-- "mmcargs=setenv bootargs console=${console},${baudrate} " \
-- "root=${mmcroot}\0" \
-- "loadbootscript=" \
-- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-- "bootscript=echo Running bootscript from mmc ...; " \
-- "source\0" \
-- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-+ "i2c dev 1; " \
-+ "if i2c probe 0x10; then " \
-+ "setenv bootargs ${bootargs} " \
-+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-+ "if=RGB666; " \
-+ "if test 0 -eq ${nextcon}; then " \
-+ "setenv fbmem fbmem=10M; " \
- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-+ "setenv fbmem ${fbmem},10M; " \
- "fi; " \
-+ "setexpr nextcon ${nextcon} + 1; " \
- "else " \
-- "bootz; " \
-+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-+ "fi; " \
-+ "setenv bootargs ${bootargs} ${fbmem}\0" \
-+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=mmc dev ${mmcdev}; " \
-+ "if mmc rescan; then " \
-+ "echo SD/MMC found on device ${mmcdev};" \
-+ "setenv bootpart ${mmcdev}:1; " \
-+ "echo Checking for: ${bootdir}/uboot-udoo-linux-libre-grsec/uEnv.txt ...;" \
-+ "if test -e mmc ${bootpart} ${bootdir}/uboot-udoo-linux-libre-grsec/uEnv.txt; then " \
-+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uboot-udoo-linux-libre-grsec/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uboot-udoo-linux-libre-grsec/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi; " \
-+ "if run loadimage; then " \
-+ "if run loadfdt; then " \
-+ "run mmcargs;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "else " \
-+ "echo Kernel found, but no device tree found;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
-@@ -161,10 +198,10 @@
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
-- "${get_cmd} ${image}; " \
-+ "${get_cmd} ${bootfile}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-+ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
-+ "bootz ${loadaddr} - ${fdtaddr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
-@@ -177,16 +214,7 @@
- "fi;\0"
-
- #define CONFIG_BOOTCOMMAND \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot; " \
-- "else run netboot; " \
-- "fi; " \
-- "fi; " \
-- "else run netboot; fi"
-+ "run mmcboot;"
-
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP
-@@ -228,6 +256,7 @@
-
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- #ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
---
-2.2.1
-
diff --git a/libre/uboot-udoo-linux-libre-grsec/0002-kernel-add-support-for-gcc-5.patch b/libre/uboot-udoo-linux-libre-grsec/0002-kernel-add-support-for-gcc-5.patch
deleted file mode 100644
index 30718c561..000000000
--- a/libre/uboot-udoo-linux-libre-grsec/0002-kernel-add-support-for-gcc-5.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sasha.levin@oracle.com>
-Date: Mon, 13 Oct 2014 15:51:05 -0700
-Subject: [PATCH 2/6] kernel: add support for gcc 5
-
-We're missing include/linux/compiler-gcc5.h which is required now
-because gcc branched off to v5 in trunk.
-
-Just copy the relevant bits out of include/linux/compiler-gcc4.h,
-no new code is added as of now.
-
-This fixes a build error when using gcc 5.
-
-Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..cdd1cc2
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,66 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ * Fixed in GCC 4.8.2 and later versions.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
---
-2.4.4
-
diff --git a/libre/uboot-udoo-linux-libre-grsec/PKGBUILD b/libre/uboot-udoo-linux-libre-grsec/PKGBUILD
deleted file mode 100644
index c9a701954..000000000
--- a/libre/uboot-udoo-linux-libre-grsec/PKGBUILD
+++ /dev/null
@@ -1,61 +0,0 @@
-# U-Boot: UDOO
-# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org>
-# Contributor: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-_pkgbase=linux-libre-grsec
-pkgbase=uboot-udoo-${_pkgbase}
-pkgname=("uboot-udoo-dual-${_pkgbase}" "uboot-udoo-quad-${_pkgbase}")
-pkgver=2015.01
-pkgrel=1.2
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc')
-depends=('linux-libre-grsec')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-5.patch')
-md5sums=('7f08dc9e98a71652bd6968888ed6ec95'
- 'b0a091d406f00f47a18d6c1c0926c939'
- '721a46867e189d8dedc6b6f86a536a34')
-
-prepare() {
- cd u-boot-${pkgver}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- mkdir bins
- for i in dl quad; do
- make distclean
- make udoo_${i}_config
- make
- mv u-boot.imx bins/u-boot-${i}.imx
- done
-}
-
-package_uboot-udoo-dual-linux-libre-grsec() {
- pkgdesc="U-Boot for UDOO Dual (built for the linux-libre-grsec kernel package)"
- replaces=('uboot-udoo-dual')
- install=${pkgname}.install
-
- mkdir -p "${pkgdir}/boot/${pkgname}"
- cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}/boot/${pkgname}"/u-boot.imx
-}
-
-package_uboot-udoo-quad-linux-libre-grsec() {
- pkgdesc="U-Boot for UDOO Quad (built for the linux-libre-grsec kernel package)"
- replaces=('uboot-udoo-quad')
- install=${pkgname}.install
-
- mkdir -p "${pkgdir}/boot/${pkgname}"
- cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}/boot/${pkgname}"/u-boot.imx
-}
diff --git a/libre/uboot-udoo-linux-libre-grsec/uboot-udoo-dual-linux-libre-grsec.install b/libre/uboot-udoo-linux-libre-grsec/uboot-udoo-dual-linux-libre-grsec.install
deleted file mode 100644
index 7b3e62229..000000000
--- a/libre/uboot-udoo-linux-libre-grsec/uboot-udoo-dual-linux-libre-grsec.install
+++ /dev/null
@@ -1,23 +0,0 @@
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/uboot-udoo-dual-linux-libre-grsec/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
- sync
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/uboot-udoo-dual-linux-libre-grsec/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
- fi
-}
-
-## arg 1: the new package version
-post_install() {
- flash_uboot
-}
-
-## arg 1: the new package version
-## arg 2: the old package version
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre/uboot-udoo-linux-libre-grsec/uboot-udoo-quad-linux-libre-grsec.install b/libre/uboot-udoo-linux-libre-grsec/uboot-udoo-quad-linux-libre-grsec.install
deleted file mode 100644
index 7bdc52592..000000000
--- a/libre/uboot-udoo-linux-libre-grsec/uboot-udoo-quad-linux-libre-grsec.install
+++ /dev/null
@@ -1,23 +0,0 @@
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/uboot-udoo-quad-linux-libre-grsec/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
- sync
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/uboot-udoo-quad-linux-libre-grsec/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
- fi
-}
-
-## arg 1: the new package version
-post_install() {
- flash_uboot
-}
-
-## arg 1: the new package version
-## arg 2: the old package version
-post_upgrade() {
- flash_uboot
-}