Age | Commit message (Collapse) | Author |
|
If one portion of a split package fails, assume that
all packages from the same $pkgbase are going to fail
as well and skip them for this run.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This patch also removes the unused CARCH variable.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
[Aaron: Broke srcpkgbase logic into srcpkgname/srcpkgbase
to make it more readable]
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
|
|
When we had a duplicate package, we would replace the old ref by the new
ref. But the provisions dict kept both the old and new ref. This was not
good at all.
Now, we just keep the old ref, and we only fill provisions after all
packages have been parsed. This should be much more sane.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
OMFG such a simple script and I keep missing crap
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
THis simplifies the command line and we do both anyway
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Allow us to use the --abs-root flag. He he
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
add the default value for pkgbase
also rework slightly how variables are handled (better distinction between
splitpkg variables and the rest)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
1) check the return value. before a failed call to parse_pkgbuilds.sh was
completely silent.. not good :)
2) call realpath on check_packages.py before determining the directory name,
to figure out where parse_pkgbuilds.sh is. This allows to symlink
check_packages.py and use the symlink without moving parse_pkgbuilds.sh .
for example : /foo/bar/ contains check_packages.py and parse_pkgbuilds.sh
ln -s /foo/bar/check_packages.py /bin/check_package
dirname(/bin/check_package) returns /bin/ so not good
dirname(realpath(/bin/check_package)) returns /foo/bar/ so good
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
this simple tweak gives a nice perf boost : from 10s to 7s to parse extra
repo.
indeed calling basename caused a fork to happen for the thousand of files
being considered
Now the major bottleneck is parsing split pkgbuilds, but I am afraid there
is no magical solution for that :(
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
The compute_dep function I wrote for the more informative hierarchy output
was very inefficient. It's much better now (10s -> 0.5s) on my box, and I
get exactly the same results :)
Now the big majority of the time is again spent on parsing pkgbuilds.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Add repo information to most results by using the repo/pkgname syntax
(instead of only pkgname)
Sort all results list (with the point above, this sorts the results by
repo :))
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Compare the abs tree with the repo dbs to check if we have a PKGBUILD for
each package in the dbs and vice versa.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
By parsing multiple abs trees we can add any when parsing the other trees,
checking any standalone doesn't make much sense.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And use it. This allows us to have server-specific behavior in our scripts
without further patching, and it also allows us to simplify some of our
scripts a fair amount.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We can't really do the basedir magic from db-functions as it is just being
sourced and is not the currently executing script. Although a bit
repetitive, it is a lot safer to just include the config file everywhere.
Noticed this when trying to run the latest available scripts on sigurd.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Loop over all arches AND the 'any' arch.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This should help a lot figuring out whether a given hierarchy problem is
fixable (if it doesn't require moving too many deps).
example output
core/crda depends on extra/python-m2crypto (27 extra (make)deps to pull)
core/iputils depends on extra/opensp (29 extra (make)deps to pull)
core/iputils depends on extra/libxslt (25 extra (make)deps to pull)
core/iputils depends on extra/docbook-xsl (27 extra (make)deps to pull)
core/udev depends on extra/gperf (0 extra (make)deps to pull)
core/udev depends on extra/libxslt (25 extra (make)deps to pull)
core/e2fsprogs depends on extra/bc (0 extra (make)deps to pull)
core/sqlite3 depends on extra/tcl (0 extra (make)deps to pull)
core/ca-certificates depends on extra/ruby (25 extra (make)deps to pull)
the actual deps are only displayed when there are less than 10.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
I just found a way to support split packages, by using $(type
package_${pkg}), parsing that output and running eval on the relevant lines.
This is a bit ugly, and while it works fine on my machine and my current abs
tree, I cannot guarantee this code is bug free :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This source the config file and gets us functions such as
getpkgname which were duplicated elsewhere
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Remove dependance on makepkg.conf
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
community repo is cleaned up on a different machine
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Source our config file, and use ARCHES from it
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This may look like a rather large patch, but the changes are mostly a
reshuffling of the code to loop over all arches first, and then handle
the arch-indep packages. The cronjob has been changed accordingly.
Added new category DELETESYMLINKS, which are deleted instead of being
moved to package-cleanup. I have also fixed the arch-specific issue
with the ftppath, using parameters in config instead.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
These are handled automatically when scanning other architecutres
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This is useful when running on separate machines that don't
have all repos
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
bsdtar does not detect the compression type from the file extension.
So we need to set the right option on our own.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Prevents some errors in the community scripts due to
scanning of CVS dirs. Also skipping .svn dirs for the
future (dotglob may be set, in which case we'd scan
.svn dirs as well)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
I think it will work better now :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Our cron currently doesn't handle stand-alone crontabs
too well, and we're managing all these in root's crontab
anyway. Meh... deleted
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|