Initial import

1 files changed, 119 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt
new file mode 100644
index 000000000..2a19bff96
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/lis302.txt
@@ -0,0 +1,119 @@
+LIS302 accelerometer devicetree bindings
+
+This device is matched via its bus drivers, and has a number of properties
+that apply in on the generic device (independent from the bus).
+
+
+Required properties for the SPI bindings:
+ - compatible: 		should be set to "st,lis3lv02d_spi"
+ - reg:			the chipselect index
+ - spi-max-frequency:	maximal bus speed, should be set to 1000000 unless
+			constrained by external circuitry
+ - interrupts:		the interrupt generated by the device
+
+Required properties for the I2C bindings:
+ - compatible:		should be set to "st,lis3lv02d"
+ - reg:			i2c slave address
+ - Vdd-supply:		The input supply for Vdd
+ - Vdd_IO-supply:	The input supply for Vdd_IO
+
+
+Optional properties for all bus drivers:
+
+ - st,click-single-{x,y,z}:	if present, tells the device to issue an
+				interrupt on single click events on the
+				x/y/z axis.
+ - st,click-double-{x,y,z}:	if present, tells the device to issue an
+				interrupt on double click events on the
+				x/y/z axis.
+ - st,click-thresh-{x,y,z}:	set the x/y/z axis threshold
+ - st,click-click-time-limit:	click time limit, from 0 to 127.5msec
+				with step of 0.5 msec
+ - st,click-latency:		click latency, from 0 to 255 msec with
+				step of 1 msec.
+ - st,click-window:		click window, from 0 to 255 msec with
+				step of 1 msec.
+ - st,irq{1,2}-disable:		disable IRQ 1/2
+ - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
+ - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
+ - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready contition
+ - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
+ - st,irq-open-drain:		consider IRQ lines open-drain
+ - st,irq-active-low:		make IRQ lines active low
+ - st,wu-duration-1:		duration register for Free-Fall/Wake-Up
+				interrupt 1
+ - st,wu-duration-2:		duration register for Free-Fall/Wake-Up
+				interrupt 2
+ - st,wakeup-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit
+ - st,wakeup-threshold:		set wakeup threshold
+ - st,wakeup2-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit for second wakeup
+				engine.
+ - st,wakeup2-threshold:	set wakeup threshold for second wakeup
+				engine.
+ - st,highpass-cutoff-hz=:	1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
+				highpass cut-off frequency
+ - st,hipass{1,2}-disable:	disable highpass 1/2.
+ - st,default-rate=:		set the default rate
+ - st,axis-{x,y,z}=:		set the axis to map to the three coordinates.
+				Negative values can be used for inverted axis.
+ - st,{min,max}-limit-{x,y,z}	set the min/max limits for x/y/z axis
+				(used by self-test)
+
+
+Example for a SPI device node:
+
+	lis302@0 {
+		compatible = "st,lis302dl-spi";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 0>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+
+Example for a I2C device node:
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+