summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mmc
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-10-20 00:10:27 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-10-20 00:10:27 -0300
commitd0b2f91bede3bd5e3d24dd6803e56eee959c1797 (patch)
tree7fee4ab0509879c373c4f2cbd5b8a5be5b4041ee /Documentation/devicetree/bindings/mmc
parente914f8eb445e8f74b00303c19c2ffceaedd16a05 (diff)
Linux-libre 4.8.2-gnupck-4.8.2-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/mmc')
-rw-r--r--Documentation/devicetree/bindings/mmc/arasan,sdhci.txt35
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt36
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc.txt4
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-st.txt2
5 files changed, 76 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 31b35c3a5..3404afa9b 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -9,8 +9,12 @@ Device Tree Bindings for the Arasan SDHCI Controller
[4] Documentation/devicetree/bindings/phy/phy-bindings.txt
Required Properties:
- - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or
- 'arasan,sdhci-4.9a' or 'arasan,sdhci-5.1'
+ - compatible: Compatibility string. One of:
+ - "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY
+ - "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY
+ - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
+ - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY
+ For this device it is strongly suggested to include arasan,soc-ctl-syscon.
- reg: From mmc bindings: Register location and length.
- clocks: From clock bindings: Handles to clock inputs.
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
@@ -22,6 +26,17 @@ Required Properties for "arasan,sdhci-5.1":
- phys: From PHY bindings: Phandle for the Generic PHY for arasan.
- phy-names: MUST be "phy_arasan".
+Optional Properties:
+ - arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt)
+ used to access core corecfg registers. Offsets of registers in this
+ syscon are determined based on the main compatible string for the device.
+ - clock-output-names: If specified, this will be the name of the card clock
+ which will be exposed by this device. Required if #clock-cells is
+ specified.
+ - #clock-cells: If specified this should be the value <0>. With this property
+ in place we will export a clock representing the Card Clock. This clock
+ is expected to be consumed by our PHY. You must also specify
+
Example:
sdhci@e0100000 {
compatible = "arasan,sdhci-8.9a";
@@ -42,3 +57,19 @@ Example:
phys = <&emmc_phy>;
phy-names = "phy_arasan";
} ;
+
+ sdhci: sdhci@fe330000 {
+ compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+ reg = <0x0 0xfe330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb";
+ arasan,soc-ctl-syscon = <&grf>;
+ assigned-clocks = <&cru SCLK_EMMC>;
+ assigned-clock-rates = <200000000>;
+ clock-output-names = "emmc_cardclock";
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ #clock-cells = <0>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt
new file mode 100644
index 000000000..82847174c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt
@@ -0,0 +1,36 @@
+* BROADCOM BRCMSTB/BMIPS SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-brcmstb driver.
+
+NOTE: The driver disables all UHS speed modes by default and depends
+on Device Tree properties to enable them for SoC/Board combinations
+that support them.
+
+Required properties:
+- compatible: "brcm,bcm7425-sdhci"
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+ sdhci@f03e0100 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0xf03e0000 0x100>;
+ interrupts = <0x0 0x26 0x0>;
+ sdhci,auto-cmd12;
+ clocks = <&sw_sdio>;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ };
+
+ sdhci@f03e0300 {
+ non-removable;
+ bus-width = <0x8>;
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0xf03e0200 0x100>;
+ interrupts = <0x0 0x27 0x0>;
+ sdhci,auto-cmd12;
+ clocks = <sw_sdio>;
+ mmc-hs200-1_8v;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index dca56d624..3e29050ec 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -28,6 +28,8 @@ Optional properties:
transparent level shifters on the outputs of the controller. Two cells are
required, first cell specifies minimum slot voltage (mV), second cell
specifies maximum slot voltage (mV). Several ranges could be specified.
+- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19
+ in tuning procedure.
- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure.
The uSDHC use one delay cell as default increasing step to do tuning process.
This property allows user to change the tuning step to more than one delay
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index ed23b9bed..22d1e1f3f 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -46,8 +46,12 @@ Optional properties:
- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
+- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported
- dsr: Value the card's (optional) Driver Stage Register (DSR) should be
programmed with. Valid range: [0 .. 0xffff].
+- no-sdio: controller is limited to send sdio cmd during initialization
+- no-sd: controller is limited to send sd cmd during initialization
+- no-mmc: controller is limited to send mmc cmd during initialization
*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 88faa9112..3cd4c43a3 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -10,7 +10,7 @@ Required properties:
subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
family).
-- clock-names: Should be "mmc".
+- clock-names: Should be "mmc" and "icn". (NB: The latter is not compulsory)
See: Documentation/devicetree/bindings/resource-names.txt
- clocks: Phandle to the clock.
See: Documentation/devicetree/bindings/clock/clock-bindings.txt