summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
Initial import
Diffstat (limited to 'Documentation/devicetree/bindings/net/amd-xgbe-phy.txt')
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe-phy.txt48
1 files changed, 48 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
new file mode 100644
index 000000000..8db32384a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
@@ -0,0 +1,48 @@
+* AMD 10GbE PHY driver (amd-xgbe-phy)
+
+Required properties:
+- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
+ "ethernet-phy-ieee802.3-c45"
+- reg: Address and length of the register sets for the device
+ - SerDes Rx/Tx registers
+ - SerDes integration registers (1/2)
+ - SerDes integration registers (2/2)
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the amd-xgbe-phy interrupt.
+
+Optional properties:
+- amd,speed-set: Speed capabilities of the device
+ 0 - 1GbE and 10GbE (default)
+ 1 - 2.5GbE and 10GbE
+
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed. All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+ 0 - Off
+ 1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
+
+Example:
+ xgbe_phy@e1240800 {
+ compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
+ reg = <0 0xe1240800 0 0x00400>,
+ <0 0xe1250000 0 0x00060>,
+ <0 0xe1250080 0 0x00004>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 323 4>;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <30>;
+ amd,serdes-tx-amp = <15>, <15>, <10>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
+ };