Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 56 deletions

diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt
deleted file mode 100644
index e7ee988e3..000000000
--- a/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
-
-Required properties:
-  - compatible: "samsung,s6e8aa0"
-  - reg: the virtual channel number of a DSI peripheral
-  - vdd3-supply: core voltage supply
-  - vci-supply: voltage supply for analog circuits
-  - reset-gpios: a GPIO spec for the reset pin
-  - display-timings: timings for the connected panel as described by [1]
-
-Optional properties:
-  - power-on-delay: delay after turning regulators on [ms]
-  - reset-delay: delay after reset sequence [ms]
-  - init-delay: delay after initialization sequence [ms]
-  - panel-width-mm: physical panel width [mm]
-  - panel-height-mm: physical panel height [mm]
-  - flip-horizontal: boolean to flip image horizontally
-  - flip-vertical: boolean to flip image vertically
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	panel {
-		compatible = "samsung,s6e8aa0";
-		reg = <0>;
-		vdd3-supply = <&vcclcd_reg>;
-		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 0>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-		flip-horizontal;
-		flip-vertical;
-
-		display-timings {
-			timing0: timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};