Linux-libre 4.3.2-gnu

8 files changed, 232 insertions, 77 deletions

diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index 15b4a20d5..d697229e3 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
     Prefix: 'adm1276'
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+  * Analog Devices ADM1293/ADM1294
+    Prefix: 'adm1293', 'adm1294'
+    Addresses scanned: -
+    Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -22,12 +26,12 @@ Description
 -----------
 
 This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-and ADM1276 Hot-Swap Controller and Digital Power Monitor.
+ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
 
-ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
-board to be removed from or inserted into a live backplane. They also feature
-current and voltage readback via an integrated 12-bit analog-to-digital
-converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
+allow a circuit board to be removed from or inserted into a live backplane.
+They also feature current and voltage readback via an integrated 12
+bit analog-to-digital converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -58,16 +62,16 @@ Sysfs entries
 The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
-in1_label		"vin1" or "vout1" depending on chip variant and
-			configuration. On ADM1075, vout1 reports the voltage on
-			the VAUX pin.
-in1_input		Measured voltage.
-in1_min			Minimum Voltage.
-in1_max			Maximum voltage.
-in1_min_alarm		Voltage low alarm.
-in1_max_alarm		Voltage high alarm.
-in1_highest		Historical maximum voltage.
-in1_reset_history	Write any value to reset history.
+inX_label		"vin1" or "vout1" depending on chip variant and
+			configuration. On ADM1075, ADM1293, and ADM1294,
+			vout1 reports the voltage on the VAUX pin.
+inX_input		Measured voltage.
+inX_min			Minimum Voltage.
+inX_max			Maximum voltage.
+inX_min_alarm		Voltage low alarm.
+inX_max_alarm		Voltage high alarm.
+inX_highest		Historical maximum voltage.
+inX_reset_history	Write any value to reset history.
 
 curr1_label		"iout1"
 curr1_input		Measured current.
@@ -86,7 +90,9 @@ curr1_reset_history	Write any value to reset history.
 
 power1_label		"pin1"
 power1_input		Input power.
+power1_input_lowest	Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest	Highest observed input power.
 power1_reset_history	Write any value to reset history.
 
-			Power attributes are supported on ADM1075 and ADM1276
-			only.
+			Power attributes are supported on ADM1075, ADM1276,
+			ADM1293, and ADM1294.
diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
index 80654813d..e2b1b69ee 100644
--- a/Documentation/hwmon/fam15h_power
+++ b/Documentation/hwmon/fam15h_power
@@ -3,12 +3,13 @@ Kernel driver fam15h_power
 
 Supported chips:
 * AMD Family 15h Processors
+* AMD Family 16h Processors
 
   Prefix: 'fam15h_power'
   Addresses scanned: PCI space
   Datasheets:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
-    (not yet published)
+  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
 
 Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
@@ -16,10 +17,11 @@ Description
 -----------
 
 This driver permits reading of registers providing power information
-of AMD Family 15h processors.
+of AMD Family 15h and 16h processors.
 
-For AMD Family 15h processors the following power values can be
-calculated using different processor northbridge function registers:
+For AMD Family 15h and 16h processors the following power values can
+be calculated using different processor northbridge function
+registers:
 
 * BasePwrWatts: Specifies in watts the maximum amount of power
   consumed by the processor for NB and logic external to the core.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index e87294878..733296d65 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -38,6 +38,10 @@ Supported chips:
     Prefix: 'it8728'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8732F
+    Prefix: 'it8732'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * IT8771E
     Prefix: 'it8771'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -111,9 +115,9 @@ Description
 -----------
 
 This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
-IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
-IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
-chips.
+IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
+IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and
+SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -137,10 +141,10 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
 have support for 2 additional fans. The additional fans are supported by the
 driver.
 
-The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F,
-and late IT8712F and IT8705F also have optional 16-bit tachometer counters
-for fans 1 to 3. This is better (no more fan clock divider mess) but not
-compatible with the older chips and revisions. The 16-bit tachometer mode
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
+IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
+counters for fans 1 to 3. This is better (no more fan clock divider mess) but
+not compatible with the older chips and revisions. The 16-bit tachometer mode
 is enabled by the driver when one of the above chips is detected.
 
 The IT8726F is just bit enhanced IT8716F with additional hardware
@@ -159,6 +163,9 @@ IT8728F. It only supports 16-bit fan mode.
 
 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
 
+The IT8732F supports a closed-loop mode for fan control, but this is not
+currently implemented by the driver.
+
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
 
@@ -173,12 +180,14 @@ is done.
 Voltage sensors (also known as IN sensors) report their values in volts. An
 alarm is triggered if the voltage has crossed a programmable minimum or
 maximum limit. Note that minimum in this case always means 'closest to
-zero'; this is important for negative voltage measurements. All voltage
-inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The
-battery voltage in8 does not have limit registers.
-
-On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some
+zero'; this is important for negative voltage measurements. On most chips, all
+voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt.  IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
+3.06 volts, with a resolution of 0.012 volt.  IT8732F can measure between 0 and
+2.8 volts with a resolution of 0.0109 volt.  The battery voltage in8 does not
+have limit registers.
+
+On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some
 voltage inputs are internal and scaled inside the chip:
 * in3 (optional)
 * in7 (optional for IT8781F, IT8782F, and IT8783E/F)
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 686c078bb..9a49d3c90 100644
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'ltc2974'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltc2974
+  * Linear Technology LTC2975
+    Prefix: 'ltc2975'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltc2975
   * Linear Technology LTC2977
     Prefix: 'ltc2977'
     Addresses scanned: -
@@ -15,14 +19,38 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltc2978
     	       http://www.linear.com/product/ltc2978a
+  * Linear Technology LTC2980
+    Prefix: 'ltc2980'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltc2980
   * Linear Technology LTC3880
     Prefix: 'ltc3880'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltc3880
+  * Linear Technology LTC3882
+    Prefix: 'ltc3882'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltc3882
   * Linear Technology LTC3883
     Prefix: 'ltc3883'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltc3883
+  * Linear Technology LTC3886
+    Prefix: 'ltc3886'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltc3886
+  * Linear Technology LTC3887
+    Prefix: 'ltc3887'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltc3887
+  * Linear Technology LTM2987
+    Prefix: 'ltm2987'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltm2987
+  * Linear Technology LTM4675
+    Prefix: 'ltm4675'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltm4675
   * Linear Technology LTM4676
     Prefix: 'ltm4676'
     Addresses scanned: -
@@ -34,11 +62,20 @@ Author: Guenter Roeck <linux@roeck-us.net>
 Description
 -----------
 
-LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply
-monitor. LTC2977 is a pin compatible replacement for LTC2978. LTC3880 is a dual
-output poly-phase step-down DC/DC controller. LTC3883 is a single phase
-step-down DC/DC controller. LTM4676 is a dual 13A or single 26A uModule
-regulator.
+LTC2974 and LTC2975 are quad digital power supply managers.
+LTC2978 is an octal power supply monitor.
+LTC2977 is a pin compatible replacement for LTC2978.
+LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
+in a single die. The chip is instantiated and reported as two separate chips
+on two different I2C bus addresses.
+LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
+DC/DC controllers.
+LTC3883 is a single phase step-down DC/DC controller.
+LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
+additional components on a single die. The chip is instantiated and reported
+as two separate chips on two different I2C bus addresses.
+LTM4675 is a dual 9A or single 18A μModule regulator
+LTM4676 is a dual 13A or single 26A uModule regulator.
 
 
 Usage Notes
@@ -61,26 +98,32 @@ in1_label		"vin"
 in1_input		Measured input voltage.
 in1_min			Minimum input voltage.
 in1_max			Maximum input voltage.
-			LTC2974, LTC2977, and LTC2978 only.
+			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+			LTM2987 only.
 in1_lcrit		Critical minimum input voltage.
-			LTC2974, LTC2977, and LTC2978 only.
+			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+			LTM2987 only.
 in1_crit		Critical maximum input voltage.
 in1_min_alarm		Input voltage low alarm.
 in1_max_alarm		Input voltage high alarm.
-			LTC2974, LTC2977, and LTC2978 only.
+			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+			LTM2987 only.
 in1_lcrit_alarm		Input voltage critical low alarm.
-			LTC2974, LTC2977, and LTC2978 only.
+			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+			LTM2987 only.
 in1_crit_alarm		Input voltage critical high alarm.
 in1_lowest		Lowest input voltage.
-			LTC2974, LTC2977, and LTC2978 only.
+			LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
+			LTM2987 only.
 in1_highest		Highest input voltage.
 in1_reset_history	Reset input voltage history.
 
 in[N]_label		"vout[1-8]".
-			LTC2974: N=2-5
-			LTC2977: N=2-9
+			LTC2974, LTC2975: N=2-5
+			LTC2977, LTC2980, LTM2987: N=2-9
 			LTC2978: N=2-9
-			LTC3880, LTM4676: N=2-3
+			LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
+				N=2-3
 			LTC3883: N=2
 in[N]_input		Measured output voltage.
 in[N]_min		Minimum output voltage.
@@ -91,67 +134,78 @@ in[N]_min_alarm		Output voltage low alarm.
 in[N]_max_alarm		Output voltage high alarm.
 in[N]_lcrit_alarm	Output voltage critical low alarm.
 in[N]_crit_alarm	Output voltage critical high alarm.
-in[N]_lowest		Lowest output voltage. LTC2974 and LTC2978 only.
+in[N]_lowest		Lowest output voltage. LTC2974, LTC2975,
+			and LTC2978 only.
 in[N]_highest		Highest output voltage.
 in[N]_reset_history	Reset output voltage history.
 
 temp[N]_input		Measured temperature.
-			On LTC2974, temp[1-4] report external temperatures,
-			and temp5 reports the chip temperature.
-			On LTC2977 and LTC2978, only one temperature measurement
-			is supported and reports the chip temperature.
-			On LTC3880 and LTM4676, temp1 and temp2 report external
-			temperatures, and temp3 reports the chip temperature.
+			On LTC2974 and LTC2975, temp[1-4] report external
+			temperatures, and temp5 reports the chip temperature.
+			On LTC2977, LTC2980, LTC2978, and LTM2987, only one
+			temperature measurement is supported and reports
+			the chip temperature.
+			On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
+			temp1 and temp2 report external temperatures, and temp3
+			reports the chip temperature.
 			On LTC3883, temp1 reports an external temperature,
 			and temp2 reports the chip temperature.
-temp[N]_min		Mimimum temperature. LTC2974, LCT2977, and LTC2978 only.
+temp[N]_min		Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
+			and LTM2987 only.
 temp[N]_max		Maximum temperature.
 temp[N]_lcrit		Critical low temperature.
 temp[N]_crit		Critical high temperature.
 temp[N]_min_alarm	Temperature low alarm.
-			LTC2974, LTC2977, and LTC2978 only.
+			LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
+			LTM2987 only.
 temp[N]_max_alarm	Temperature high alarm.
 temp[N]_lcrit_alarm	Temperature critical low alarm.
 temp[N]_crit_alarm	Temperature critical high alarm.
 temp[N]_lowest		Lowest measured temperature.
-			LTC2974, LTC2977, and LTC2978 only.
-			Not supported for chip temperature sensor on LTC2974.
+			LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
+			LTM2987 only.
+			Not supported for chip temperature sensor on LTC2974 and
+			LTC2975.
 temp[N]_highest		Highest measured temperature. Not supported for chip
-			temperature sensor on LTC2974.
+			temperature sensor on LTC2974 and LTC2975.
 temp[N]_reset_history	Reset temperature history. Not supported for chip
-			temperature sensor on LTC2974.
+			temperature sensor on LTC2974 and LTC2975.
 
-power1_label		"pin". LTC3883 only.
+power1_label		"pin". LTC3883 and LTC3886 only.
 power1_input		Measured input power.
 
 power[N]_label		"pout[1-4]".
-			LTC2974: N=1-4
-			LTC2977: Not supported
+			LTC2974, LTC2975: N=1-4
+			LTC2977, LTC2980, LTM2987: Not supported
 			LTC2978: Not supported
-			LTC3880, LTM4676: N=1-2
+			LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+				N=1-2
 			LTC3883: N=2
 power[N]_input		Measured output power.
 
-curr1_label		"iin". LTC3880, LTC3883, and LTM4676 only.
+curr1_label		"iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
+			and LTM4676 only.
 curr1_input		Measured input current.
 curr1_max		Maximum input current.
 curr1_max_alarm		Input current high alarm.
-curr1_highest		Highest input current. LTC3883 only.
-curr1_reset_history	Reset input current history. LTC3883 only.
+curr1_highest		Highest input current. LTC3883 and LTC3886 only.
+curr1_reset_history	Reset input current history. LTC3883 and LTC3886 only.
 
 curr[N]_label		"iout[1-4]".
-			LTC2974: N=1-4
-			LTC2977: not supported
+			LTC2974, LTC2975: N=1-4
+			LTC2977, LTC2980, LTM2987: not supported
 			LTC2978: not supported
-			LTC3880, LTM4676: N=2-3
+			LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
+				N=2-3
 			LTC3883: N=2
 curr[N]_input		Measured output current.
 curr[N]_max		Maximum output current.
 curr[N]_crit		Critical high output current.
-curr[N]_lcrit		Critical low output current. LTC2974 only.
+curr[N]_lcrit		Critical low output current. LTC2974 and LTC2975 only.
 curr[N]_max_alarm	Output current high alarm.
 curr[N]_crit_alarm	Output current critical high alarm.
-curr[N]_lcrit_alarm	Output current critical low alarm. LTC2974 only.
-curr[N]_lowest		Lowest output current. LTC2974 only.
+curr[N]_lcrit_alarm	Output current critical low alarm.
+			LTC2974 and LTC2975 only.
+curr[N]_lowest		Lowest output current. LTC2974 and LTC2975 only.
 curr[N]_highest		Highest output current.
 curr[N]_reset_history	Reset output current history.
diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751
new file mode 100644
index 000000000..f9fa25ebb
--- /dev/null
+++ b/Documentation/hwmon/max20751
@@ -0,0 +1,77 @@
+Kernel driver max20751
+======================
+
+Supported chips:
+  * maxim MAX20751
+    Prefix: 'max20751'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
+    Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports MAX20751 Multiphase Master with PMBus Interface
+and Internal Buck Converter.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+in1_label		"vin1"
+in1_input		Measured voltage.
+in1_min			Minimum input voltage.
+in1_max			Maximum input voltage.
+in1_lcrit		Critical minimum input voltage.
+in1_crit		Critical maximum input voltage.
+in1_min_alarm		Input voltage low alarm.
+in1_lcrit_alarm		Input voltage critical low alarm.
+in1_min_alarm		Input voltage low alarm.
+in1_max_alarm		Input voltage high alarm.
+
+in2_label		"vout1"
+in2_input		Measured voltage.
+in2_min			Minimum output voltage.
+in2_max			Maximum output voltage.
+in2_lcrit		Critical minimum output voltage.
+in2_crit		Critical maximum output voltage.
+in2_min_alarm		Output voltage low alarm.
+in2_lcrit_alarm		Output voltage critical low alarm.
+in2_min_alarm		Output voltage low alarm.
+in2_max_alarm		Output voltage high alarm.
+
+curr1_input		Measured output current.
+curr1_label		"iout1"
+curr1_max		Maximum output current.
+curr1_alarm		Current high alarm.
+
+temp1_input		Measured temperature.
+temp1_max		Maximum temperature.
+temp1_crit		Critical high temperature.
+temp1_max_alarm		Chip temperature high alarm.
+temp1_crit_alarm	Chip temperature critical high alarm.
+
+power1_input		Output power.
+power1_label		"pout1"
diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775
index f0dd3d2fe..76add4c9c 100644
--- a/Documentation/hwmon/nct6775
+++ b/Documentation/hwmon/nct6775
@@ -32,6 +32,10 @@ Supported chips:
     Prefix: 'nct6792'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: Available from Nuvoton upon request
+  * Nuvoton NCT6793D
+    Prefix: 'nct6793'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from Nuvoton upon request
 
 Authors:
         Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802
index 2e00f5e34..5438deb6b 100644
--- a/Documentation/hwmon/nct7802
+++ b/Documentation/hwmon/nct7802
@@ -17,8 +17,7 @@ This driver implements support for the Nuvoton NCT7802Y hardware monitoring
 chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
 speed sensors.
 
-The chip also supports intelligent fan speed control. This functionality is
-not currently supported by the driver.
+Smart Fan™ speed control is available via pwmX_auto_point attributes.
 
 Tested Boards and BIOS Versions
 -------------------------------
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index a3557da8f..b397675e8 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -23,11 +23,15 @@ Supported chips:
 	http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
 	http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
 	http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
-  * Texas Instruments TPS40400
-    Prefixes: 'tps40400'
+  * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
+    Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
     Addresses scanned: -
     Datasheets:
 	http://www.ti.com/lit/gpn/tps40400
+	http://www.ti.com/lit/gpn/tps544b20
+	http://www.ti.com/lit/gpn/tps544b25
+	http://www.ti.com/lit/gpn/tps544c20
+	http://www.ti.com/lit/gpn/tps544c25
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -