Initial import

1 files changed, 261 insertions, 0 deletions

diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
new file mode 100644
index 000000000..dbe74f418
--- /dev/null
+++ b/arch/arc/kernel/time.c
@@ -0,0 +1,261 @@
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: Jan 1011
+ *  -sched_clock( ) no longer jiffies based. Uses the same clocksource
+ *   as gtod
+ *
+ * Rajeshwarr/Vineetg: Mar 2008
+ *  -Implemented CONFIG_GENERIC_TIME (rather deleted arch specific code)
+ *   for arch independent gettimeofday()
+ *  -Implemented CONFIG_GENERIC_CLOCKEVENTS as base for hrtimers
+ *
+ * Vineetg: Mar 2008: Forked off from time.c which now is time-jiff.c
+ */
+
+/* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1
+ * Each can programmed to go from @count to @limit and optionally
+ * interrupt when that happens.
+ * A write to Control Register clears the Interrupt
+ *
+ * We've designated TIMER0 for events (clockevents)
+ * while TIMER1 for free running (clocksource)
+ *
+ * Newer ARC700 cores have 64bit clk fetching RTSC insn, preferred over TIMER1
+ */
+
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/arcregs.h>
+#include <asm/clk.h>
+#include <asm/mach_desc.h>
+
+/* Timer related Aux registers */
+#define ARC_REG_TIMER0_LIMIT	0x23	/* timer 0 limit */
+#define ARC_REG_TIMER0_CTRL	0x22	/* timer 0 control */
+#define ARC_REG_TIMER0_CNT	0x21	/* timer 0 count */
+#define ARC_REG_TIMER1_LIMIT	0x102	/* timer 1 limit */
+#define ARC_REG_TIMER1_CTRL	0x101	/* timer 1 control */
+#define ARC_REG_TIMER1_CNT	0x100	/* timer 1 count */
+
+#define TIMER_CTRL_IE		(1 << 0) /* Interupt when Count reachs limit */
+#define TIMER_CTRL_NH		(1 << 1) /* Count only when CPU NOT halted */
+
+#define ARC_TIMER_MAX	0xFFFFFFFF
+
+/********** Clock Source Device *********/
+
+#ifdef CONFIG_ARC_HAS_RTSC
+
+int arc_counter_setup(void)
+{
+	/*
+	 * For SMP this needs to be 0. However Kconfig glue doesn't
+	 * enable this option for SMP configs
+	 */
+	return 1;
+}
+
+static cycle_t arc_counter_read(struct clocksource *cs)
+{
+	unsigned long flags;
+	union {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		struct { u32 high, low; };
+#else
+		struct { u32 low, high; };
+#endif
+		cycle_t  full;
+	} stamp;
+
+	flags = arch_local_irq_save();
+
+	__asm__ __volatile(
+	"	.extCoreRegister tsch, 58,  r, cannot_shortcut	\n"
+	"	rtsc %0, 0	\n"
+	"	mov  %1, 0	\n"
+	: "=r" (stamp.low), "=r" (stamp.high));
+
+	arch_local_irq_restore(flags);
+
+	return stamp.full;
+}
+
+static struct clocksource arc_counter = {
+	.name   = "ARC RTSC",
+	.rating = 300,
+	.read   = arc_counter_read,
+	.mask   = CLOCKSOURCE_MASK(32),
+	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#else /* !CONFIG_ARC_HAS_RTSC */
+
+static bool is_usable_as_clocksource(void)
+{
+#ifdef CONFIG_SMP
+	return 0;
+#else
+	return 1;
+#endif
+}
+
+/*
+ * set 32bit TIMER1 to keep counting monotonically and wraparound
+ */
+int arc_counter_setup(void)
+{
+	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
+	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
+	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
+
+	return is_usable_as_clocksource();
+}
+
+static cycle_t arc_counter_read(struct clocksource *cs)
+{
+	return (cycle_t) read_aux_reg(ARC_REG_TIMER1_CNT);
+}
+
+static struct clocksource arc_counter = {
+	.name   = "ARC Timer1",
+	.rating = 300,
+	.read   = arc_counter_read,
+	.mask   = CLOCKSOURCE_MASK(32),
+	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#endif
+
+/********** Clock Event Device *********/
+
+/*
+ * Arm the timer to interrupt after @cycles
+ * The distinction for oneshot/periodic is done in arc_event_timer_ack() below
+ */
+static void arc_timer_event_setup(unsigned int cycles)
+{
+	write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles);
+	write_aux_reg(ARC_REG_TIMER0_CNT, 0);	/* start from 0 */
+
+	write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH);
+}
+
+
+static int arc_clkevent_set_next_event(unsigned long delta,
+				       struct clock_event_device *dev)
+{
+	arc_timer_event_setup(delta);
+	return 0;
+}
+
+static void arc_clkevent_set_mode(enum clock_event_mode mode,
+				  struct clock_event_device *dev)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+                /*
+                 * At X Hz, 1 sec = 1000ms -> X cycles;
+                 *                    10ms -> X / 100 cycles
+                 */
+		arc_timer_event_setup(arc_get_core_freq() / HZ);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
+	.name		= "ARC Timer0",
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.mode		= CLOCK_EVT_MODE_UNUSED,
+	.rating		= 300,
+	.irq		= TIMER0_IRQ,	/* hardwired, no need for resources */
+	.set_next_event = arc_clkevent_set_next_event,
+	.set_mode	= arc_clkevent_set_mode,
+};
+
+static irqreturn_t timer_irq_handler(int irq, void *dev_id)
+{
+	/*
+	 * Note that generic IRQ core could have passed @evt for @dev_id if
+	 * irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
+	 */
+	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+	int irq_reenable = evt->mode == CLOCK_EVT_MODE_PERIODIC;
+
+	/*
+	 * Any write to CTRL reg ACks the interrupt, we rewrite the
+	 * Count when [N]ot [H]alted bit.
+	 * And re-arm it if perioid by [I]nterrupt [E]nable bit
+	 */
+	write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Setup the local event timer for @cpu
+ */
+void arc_local_timer_setup()
+{
+	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+	int cpu = smp_processor_id();
+
+	evt->cpumask = cpumask_of(cpu);
+	clockevents_config_and_register(evt, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);
+
+	/* setup the per-cpu timer IRQ handler - for all cpus */
+	arc_request_percpu_irq(TIMER0_IRQ, cpu, timer_irq_handler,
+			       "Timer0 (per-cpu-tick)", evt);
+}
+
+/*
+ * Called from start_kernel() - boot CPU only
+ *
+ * -Sets up h/w timers as applicable on boot cpu
+ * -Also sets up any global state needed for timer subsystem:
+ *    - for "counting" timer, registers a clocksource, usable across CPUs
+ *      (provided that underlying counter h/w is synchronized across cores)
+ *    - for "event" timer, sets up TIMER0 IRQ (as that is platform agnostic)
+ */
+void __init time_init(void)
+{
+	/*
+	 * sets up the timekeeping free-flowing counter which also returns
+	 * whether the counter is usable as clocksource
+	 */
+	if (arc_counter_setup())
+		/*
+		 * CLK upto 4.29 GHz can be safely represented in 32 bits
+		 * because Max 32 bit number is 4,294,967,295
+		 */
+		clocksource_register_hz(&arc_counter, arc_get_core_freq());
+
+	/* sets up the periodic event timer */
+	arc_local_timer_setup();
+
+	if (machine_desc->init_time)
+		machine_desc->init_time();
+}