Linux-libre 4.8.2-gnupck-4.8.2-gnu

9 files changed, 9 insertions, 8 deletions

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index b91aee406..4b1690acb 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -11,7 +11,7 @@ if ARCH_S3C24XX
 
 config PLAT_S3C24XX
 	def_bool y
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index c6583cfa5..0d622f3b5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -520,7 +520,7 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* interrupt filtering conrrol for EINT16..EINT23 */
+/* interrupt filtering control for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
 #define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
index 4cd13ab64..65e5f9cb6 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
  * @timings: The IO timing information to fill out.
  *
  * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configur
+ * information in @cfg, and the new frequency configuration
  * through all the IO banks, reading the state and then updating @iot
  * as necessary.
  *
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 171c1f11f..070a0d071 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -522,7 +522,7 @@ static void __init n30_hwinit(void)
 	 *
 	 * The pull ups for H6/H7 are enabled on N30 but not on the
 	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooh.  It doesn't hurt to have the pull ups
+	 * with no bluetooth.  It doesn't hurt to have the pull ups
 	 * enabled on the N35, so leave them enabled for all models.
 	 */
 	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index ce2db235d..262ab0744 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
  * out if the configuration isn't set. */
 
 static int osiris_dvs_suspend(struct device *dev)
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index 5f028ff84..c83c07657 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -17,7 +17,6 @@
 
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/of_platform.h>
 #include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
@@ -35,7 +34,6 @@ static void __init s3c2416_dt_map_io(void)
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
index 5e37d3685..7ee4924a5 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -32,11 +32,12 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
     { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
-    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
+    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
     { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
     { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index b355fca6c..a3fbfed75 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table s3c2440_plls_12[] = {
 	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
 	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index be9a248b5..bcff89fd9 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
 	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
 	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */