Initial import

43 files changed, 15076 insertions, 0 deletions

diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
new file mode 100644
index 000000000..df9a38b4f
--- /dev/null
+++ b/arch/cris/arch-v10/Kconfig
@@ -0,0 +1,398 @@
+if ETRAX_ARCH_V10
+
+menu "CRIS v10 options"
+
+# ETRAX 100LX v1 has a MMU "feature" requiring a low mapping
+config CRIS_LOW_MAP
+	bool
+	depends on ETRAX_ARCH_V10 && ETRAX100LX
+	default y
+
+config ETRAX_DRAM_VIRTUAL_BASE
+	hex
+	depends on ETRAX_ARCH_V10
+	default "c0000000" if !ETRAX100LX
+	default "60000000" if ETRAX100LX
+
+choice
+	prompt "Product LED port"
+	depends on ETRAX_ARCH_V10
+	default ETRAX_PA_LEDS
+
+config ETRAX_PA_LEDS
+	bool "Port-PA-LEDs"
+	help
+	  The ETRAX network driver is responsible for flashing LED's when
+	  packets arrive and are sent.  It uses macros defined in
+	  <file:arch/cris/include/asm/io.h>, and those macros are defined after
+	  what YOU choose in this option.  The actual bits used are configured
+	  separately.  Select this if the LEDs are on port PA.  Some products
+	  put the leds on PB or a memory-mapped latch (CSP0) instead.
+
+config ETRAX_PB_LEDS
+	bool "Port-PB-LEDs"
+	help
+	  The ETRAX network driver is responsible for flashing LED's when
+	  packets arrive and are sent.  It uses macros defined in
+	  <file:arch/cris/include/asm/io.h>, and those macros are defined after
+	  what YOU choose in this option.  The actual bits used are configured
+	  separately.  Select this if the LEDs are on port PB.  Some products
+	  put the leds on PA or a memory-mapped latch (CSP0) instead.
+
+config ETRAX_CSP0_LEDS
+	bool "Port-CSP0-LEDs"
+	help
+	  The ETRAX network driver is responsible for flashing LED's when
+	  packets arrive and are sent. It uses macros defined in
+	  <file:arch/cris/include/asm/io.h>, and those macros are defined after
+	  what YOU choose in this option.  The actual bits used are configured
+	  separately.  Select this if the LEDs are on a memory-mapped latch
+	  using chip select CSP0, this is mapped at 0x90000000.
+	  Some products put the leds on PA or PB instead.
+
+config ETRAX_NO_LEDS
+	bool "None"
+	help
+	  Select this option if you don't have any LED at all.
+
+endchoice
+
+config ETRAX_LED1G
+	int "First green LED bit"
+	depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+	default "2"
+	help
+	  Bit to use for the first green LED.
+	  Most Axis products use bit 2 here.
+
+config ETRAX_LED1R
+	int "First red LED bit"
+	depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+	default "3"
+	help
+	  Bit to use for the first red LED.
+	  Most Axis products use bit 3 here.
+	  For products with only one controllable LED,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED2G
+	int "Second green LED bit"
+	depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+	default "4"
+	help
+	  Bit to use for the second green LED. The "Active" LED.
+	  Most Axis products use bit 4 here.
+	  For products with only one controllable LED,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED2R
+	int "Second red LED bit"
+	depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+	default "5"
+	help
+	  Bit to use for the second red LED.
+	  Most Axis products use bit 5 here.
+	  For products with only one controllable LED,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED3G
+	int "Third green LED bit"
+	depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+	default "2"
+	help
+	  Bit to use for the third green LED. The "Drive" LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED3R
+	int "Third red LED bit"
+	depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+	default "2"
+	help
+	  Bit to use for the third red LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED4R
+	int "Fourth red LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the fourth red LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED4G
+	int "Fourth green LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the fourth green LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED5R
+	int "Fifth red LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the fifth red LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED5G
+	int "Fifth green LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the fifth green LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED6R
+	int "Sixth red LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the sixth red LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED6G
+	int "Sixth green LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the sixth green LED. The "Drive" LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED7R
+	int "Seventh red LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the seventh red LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED7G
+	int "Seventh green LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the seventh green LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED8Y
+	int "Eighth yellow LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the eighth yellow LED. The "Drive" LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED9Y
+	int "Ninth yellow LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the ninth yellow LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED10Y
+	int "Tenth yellow LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the tenth yellow LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED11Y
+	int "Eleventh yellow LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the eleventh yellow LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED12R
+	int "Twelfth red LED bit"
+	depends on ETRAX_CSP0_LEDS
+	default "2"
+	help
+	  Bit to use for the twelfth red LED.
+	  For products with only one or two controllable LEDs,
+	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+
+choice
+	prompt "Product rescue-port"
+	depends on ETRAX_ARCH_V10
+	default ETRAX_RESCUE_SER0
+
+config ETRAX_RESCUE_SER0
+	bool "Serial-0"
+	help
+	  Select one of the four serial ports as a rescue port.  The default
+	  is port 0.
+
+config ETRAX_RESCUE_SER1
+	bool "Serial-1"
+	help
+	  Use serial port 1 as the rescue port.
+
+config ETRAX_RESCUE_SER2
+	bool "Serial-2"
+	help
+	  Use serial port 2 as the rescue port.
+
+config ETRAX_RESCUE_SER3
+	bool "Serial-3"
+	help
+	  Use serial port 3 as the rescue port.
+
+endchoice
+
+config ETRAX_DEF_R_WAITSTATES
+	hex "R_WAITSTATES"
+	depends on ETRAX_ARCH_V10
+	default "95a6"
+	help
+	  Waitstates for SRAM, Flash and peripherals (not DRAM).  95f8 is a
+	  good choice for most Axis products...
+
+config ETRAX_DEF_R_BUS_CONFIG
+	hex "R_BUS_CONFIG"
+	depends on ETRAX_ARCH_V10
+	default "104"
+	help
+	  Assorted bits controlling write mode, DMA burst length etc.  104 is
+	  a good choice for most Axis products...
+
+config ETRAX_SDRAM
+	bool "SDRAM support"
+	depends on ETRAX_ARCH_V10
+	help
+	  Enable this if you use SDRAM chips and configure
+	  R_SDRAM_CONFIG and R_SDRAM_TIMING as well.
+
+config ETRAX_DEF_R_DRAM_CONFIG
+	hex "R_DRAM_CONFIG"
+	depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
+	default "1a200040"
+	help
+	  The R_DRAM_CONFIG register specifies everything on how the DRAM
+	  chips in the system are connected to the ETRAX CPU.  This is
+	  different depending on the manufacturer, chip type and number of
+	  chips.  So this value often needs to be different for each Axis
+	  product.
+
+config ETRAX_DEF_R_DRAM_TIMING
+	hex "R_DRAM_TIMING"
+	depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
+	default "5611"
+	help
+	  Different DRAM chips have different speeds.  Current Axis products
+	  use 50ns DRAM chips which can use the timing: 5611.
+
+config ETRAX_DEF_R_SDRAM_CONFIG
+	hex "R_SDRAM_CONFIG"
+	depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
+	default "d2fa7878"
+	help
+	  The R_SDRAM_CONFIG register specifies everything on how the SDRAM
+	  chips in the system are connected to the ETRAX CPU.  This is
+	  different depending on the manufacturer, chip type and number of
+	  chips.  So this value often needs to be different for each Axis
+	  product.
+
+config ETRAX_DEF_R_SDRAM_TIMING
+	hex "R_SDRAM_TIMING"
+	depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
+	default "80004801"
+	help
+	  Different SDRAM chips have different timing.
+
+config ETRAX_DEF_R_PORT_PA_DIR
+	hex "R_PORT_PA_DIR"
+	depends on ETRAX_ARCH_V10
+	default "1c"
+	help
+	  Configures the direction of general port A bits.  1 is out, 0 is in.
+	  This is often totally different depending on the product used.
+	  There are some guidelines though - if you know that only LED's are
+	  connected to port PA, then they are usually connected to bits 2-4
+	  and you can therefore use 1c.  On other boards which don't have the
+	  LED's at the general ports, these bits are used for all kinds of
+	  stuff.  If you don't know what to use, it is always safe to put all
+	  as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_R_PORT_PA_DATA
+	hex "R_PORT_PA_DATA"
+	depends on ETRAX_ARCH_V10
+	default "00"
+	help
+	  Configures the initial data for the general port A bits.  Most
+	  products should use 00 here.
+
+config ETRAX_DEF_R_PORT_PB_CONFIG
+	hex "R_PORT_PB_CONFIG"
+	depends on ETRAX_ARCH_V10
+	default "00"
+	help
+	  Configures the type of the general port B bits.  1 is chip select,
+	  0 is port.  Most products should use 00 here.
+
+config ETRAX_DEF_R_PORT_PB_DIR
+	hex "R_PORT_PB_DIR"
+	depends on ETRAX_ARCH_V10
+	default "00"
+	help
+	  Configures the direction of general port B bits. 1 is out, 0 is in.
+	  This is often totally different depending on the product used.  Bits
+	  0 and 1 on port PB are usually used for I2C communication, but the
+	  kernel I2C driver sets the appropriate directions itself so you
+	  don't need to take that into consideration when setting this option.
+	  If you don't know what to use, it is always safe to put all as
+	  inputs.
+
+config ETRAX_DEF_R_PORT_PB_DATA
+	hex "R_PORT_PB_DATA"
+	depends on ETRAX_ARCH_V10
+	default "ff"
+	help
+	  Configures the initial data for the general port A bits.  Most
+	  products should use FF here.
+
+config ETRAX_SOFT_SHUTDOWN
+	bool "Software Shutdown Support"
+	depends on ETRAX_ARCH_V10
+	help
+	  Enable this if ETRAX is used with a power-supply that can be turned
+	  off and on with PS_ON signal. Gives the possibility to detect
+	  powerbutton and then do a power off after unmounting disks.
+
+config ETRAX_SHUTDOWN_BIT
+	int "Shutdown bit on port CSP0"
+	depends on ETRAX_SOFT_SHUTDOWN
+	default "12"
+	help
+	  Configure what pin on CSPO-port that is used for controlling power
+	  supply.
+
+config ETRAX_POWERBUTTON_BIT
+	int "Power button bit on port G"
+	depends on ETRAX_SOFT_SHUTDOWN
+	default "25"
+	help
+	  Configure where power button is connected.
+
+endmenu
+
+endif
diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm
new file mode 100644
index 000000000..67731d75c
--- /dev/null
+++ b/arch/cris/arch-v10/README.mm
@@ -0,0 +1,244 @@
+Memory management for CRIS/MMU
+------------------------------
+HISTORY:
+
+$Log: README.mm,v $
+Revision 1.1  2001/12/17 13:59:27  bjornw
+Initial revision
+
+Revision 1.1  2000/07/10 16:25:21  bjornw
+Initial revision
+
+Revision 1.4  2000/01/17 02:31:59  bjornw
+Added discussion of paging and VM.
+
+Revision 1.3  1999/12/03 16:43:23  hp
+Blurb about that the 3.5G-limitation is not a MMU limitation
+
+Revision 1.2  1999/12/03 16:04:21  hp
+Picky comment about not mapping the first page
+
+Revision 1.1  1999/12/03 15:41:30  bjornw
+First version of CRIS/MMU memory layout specification.
+
+
+
+
+
+------------------------------
+
+See the ETRAX-NG HSDD for reference.
+
+We use the page-size of 8 kbytes, as opposed to the i386 page-size of 4 kbytes.
+
+The MMU can, apart from the normal mapping of pages, also do a top-level
+segmentation of the kernel memory space. We use this feature to avoid having
+to use page-tables to map the physical memory into the kernel's address
+space. We also use it to keep the user-mode virtual mapping in the same
+map during kernel-mode, so that the kernel easily can access the corresponding
+user-mode process' data.
+
+As a comparison, the Linux/i386 2.0 puts the kernel and physical RAM at
+address 0, overlapping with the user-mode virtual space, so that descriptor
+registers are needed for each memory access to specify which MMU space to
+map through. That changed in 2.2, putting the kernel/physical RAM at 
+0xc0000000, to co-exist with the user-mode mapping. We will do something
+quite similar, but with the additional complexity of having to map the
+internal chip I/O registers and the flash memory area (including SRAM
+and peripherial chip-selets).
+
+The kernel-mode segmentation map:
+
+        ------------------------                ------------------------
+FFFFFFFF|                      | => cached      |                      | 
+        |    kernel seg_f      |    flash       |                      |
+F0000000|______________________|                |                      |
+EFFFFFFF|                      | => uncached    |                      | 
+        |    kernel seg_e      |    flash       |                      |
+E0000000|______________________|                |        DRAM          |
+DFFFFFFF|                      |  paged to any  |      Un-cached       | 
+        |    kernel seg_d      |    =======>    |                      |
+D0000000|______________________|                |                      |
+CFFFFFFF|                      |                |                      | 
+        |    kernel seg_c      |==\             |                      |
+C0000000|______________________|   \            |______________________|
+BFFFFFFF|                      |  uncached      |                      |
+        |    kernel seg_b      |=====\=========>|       Registers      |
+B0000000|______________________|      \c        |______________________|
+AFFFFFFF|                      |       \a       |                      |
+        |                      |        \c      | FLASH/SRAM/Peripheral|
+        |                      |         \h     |______________________|
+        |                      |          \e    |                      |
+        |                      |           \d   |                      |
+        | kernel seg_0 - seg_a |            \==>|         DRAM         | 
+        |                      |                |        Cached        |
+        |                      |  paged to any  |                      |
+        |                      |    =======>    |______________________| 
+        |                      |                |                      |
+        |                      |                |        Illegal       |
+        |                      |                |______________________|
+        |                      |                |                      |      
+        |                      |                | FLASH/SRAM/Peripheral|
+00000000|______________________|                |______________________|
+
+In user-mode it looks the same except that only the space 0-AFFFFFFF is
+available. Therefore, in this model, the virtual address space per process
+is limited to 0xb0000000 bytes (minus 8192 bytes, since the first page,
+0..8191, is never mapped, in order to trap NULL references).
+
+It also means that the total physical RAM that can be mapped is 256 MB
+(kseg_c above). More RAM can be mapped by choosing a different segmentation
+and shrinking the user-mode memory space.
+
+The MMU can map all 4 GB in user mode, but doing that would mean that a
+few extra instructions would be needed for each access to user mode
+memory.
+
+The kernel needs access to both cached and uncached flash. Uncached is
+necessary because of the special write/erase sequences. Also, the 
+peripherial chip-selects are decoded from that region.
+
+The kernel also needs its own virtual memory space. That is kseg_d. It
+is used by the vmalloc() kernel function to allocate virtual contiguous
+chunks of memory not possible using the normal kmalloc physical RAM 
+allocator.
+
+The setting of the actual MMU control registers to use this layout would
+be something like this:
+
+R_MMU_KSEG = ( ( seg_f, seg     ) |   // Flash cached
+               ( seg_e, seg     ) |   // Flash uncached
+               ( seg_d, page    ) |   // kernel vmalloc area    
+               ( seg_c, seg     ) |   // kernel linear segment
+               ( seg_b, seg     ) |   // kernel linear segment
+               ( seg_a, page    ) |
+               ( seg_9, page    ) |
+               ( seg_8, page    ) |
+               ( seg_7, page    ) |
+               ( seg_6, page    ) |
+               ( seg_5, page    ) |
+               ( seg_4, page    ) |
+               ( seg_3, page    ) |
+               ( seg_2, page    ) |
+               ( seg_1, page    ) |
+               ( seg_0, page    ) );
+
+R_MMU_KBASE_HI = ( ( base_f, 0x0 ) |   // flash/sram/periph cached
+                   ( base_e, 0x8 ) |   // flash/sram/periph uncached
+                   ( base_d, 0x0 ) |   // don't care
+                   ( base_c, 0x4 ) |   // physical RAM cached area
+                   ( base_b, 0xb ) |   // uncached on-chip registers
+                   ( base_a, 0x0 ) |   // don't care
+                   ( base_9, 0x0 ) |   // don't care
+                   ( base_8, 0x0 ) );  // don't care
+
+R_MMU_KBASE_LO = ( ( base_7, 0x0 ) |   // don't care
+                   ( base_6, 0x0 ) |   // don't care
+                   ( base_5, 0x0 ) |   // don't care
+                   ( base_4, 0x0 ) |   // don't care
+                   ( base_3, 0x0 ) |   // don't care
+                   ( base_2, 0x0 ) |   // don't care
+                   ( base_1, 0x0 ) |   // don't care
+                   ( base_0, 0x0 ) );  // don't care
+
+NOTE: while setting up the MMU, we run in a non-mapped mode in the DRAM (0x40
+segment) and need to setup the seg_4 to a unity mapping, so that we don't get
+a fault before we have had time to jump into the real kernel segment (0xc0). This
+is done in head.S temporarily, but fixed by the kernel later in paging_init.
+
+
+Paging - PTE's, PMD's and PGD's
+-------------------------------
+
+[ References: asm/pgtable.h, asm/page.h, asm/mmu.h ]
+
+The paging mechanism uses virtual addresses to split a process memory-space into
+pages, a page being the smallest unit that can be freely remapped in memory. On
+Linux/CRIS, a page is 8192 bytes (for technical reasons not equal to 4096 as in 
+most other 32-bit architectures). It would be inefficient to let a virtual memory
+mapping be controlled by a long table of page mappings, so it is broken down into
+a 2-level structure with a Page Directory containing pointers to Page Tables which
+each have maps of up to 2048 pages (8192 / sizeof(void *)). Linux can actually
+handle 3-level structures as well, with a Page Middle Directory in between, but
+in many cases, this is folded into a two-level structure by excluding the Middle
+Directory.
+
+We'll take a look at how an address is translated while we discuss how it's handled
+in the Linux kernel.
+
+The example address is 0xd004000c; in binary this is:
+
+31       23       15       7      0
+11010000 00000100 00000000 00001100
+
+|______| |__________||____________|
+  PGD        PTE       page offset
+
+Given the top-level Page Directory, the offset in that directory is calculated
+using the upper 8 bits:
+
+static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
+{
+	return mm->pgd + (address >> PGDIR_SHIFT);
+}
+
+PGDIR_SHIFT is the log2 of the amount of memory an entry in the PGD can map; in our
+case it is 24, corresponding to 16 MB. This means that each entry in the PGD 
+corresponds to 16 MB of virtual memory.
+
+The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd.
+
+Since the Middle Directory does not exist, it is a unity mapping:
+
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	return (pmd_t *) dir;
+}
+
+The Page Table provides the final lookup by using bits 13 to 23 as index:
+
+static inline pte_t * pte_offset(pmd_t * dir, unsigned long address)
+{
+	return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) &
+					   (PTRS_PER_PTE - 1));
+}
+
+PAGE_SHIFT is the log2 of the size of a page; 13 in our case. PTRS_PER_PTE is
+the number of pointers that fit in a Page Table and is used to mask off the 
+PGD-part of the address.
+
+The so-far unused bits 0 to 12 are used to index inside a page linearily.
+
+The VM system
+-------------
+
+The kernels own page-directory is the swapper_pg_dir, cleared in paging_init, 
+and contains the kernels virtual mappings (the kernel itself is not paged - it
+is mapped linearily using kseg_c as described above). Architectures without
+kernel segments like the i386, need to setup swapper_pg_dir directly in head.S
+to map the kernel itself. swapper_pg_dir is pointed to by init_mm.pgd as the
+init-task's PGD.
+
+To see what support functions are used to setup a page-table, let's look at the
+kernel's internal paged memory system, vmalloc/vfree.
+
+void * vmalloc(unsigned long size)
+
+The vmalloc-system keeps a paged segment in kernel-space at 0xd0000000. What
+happens first is that a virtual address chunk is allocated to the request using
+get_vm_area(size). After that, physical RAM pages are allocated and put into
+the kernel's page-table using alloc_area_pages(addr, size). 
+
+static int alloc_area_pages(unsigned long address, unsigned long size)
+
+First the PGD entry is found using init_mm.pgd. This is passed to
+alloc_area_pmd (remember the 3->2 folding). It uses pte_alloc_kernel to
+check if the PGD entry points anywhere - if not, a page table page is
+allocated and the PGD entry updated. Then the alloc_area_pte function is
+used just like alloc_area_pmd to check which page table entry is desired, 
+and a physical page is allocated and the table entry updated. All of this
+is repeated at the top-level until the entire address range specified has 
+been mapped.
+
+
+
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
new file mode 100644
index 000000000..239dab0b9
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -0,0 +1,560 @@
+if ETRAX_ARCH_V10
+
+config ETRAX_ETHERNET
+	bool "Ethernet support"
+	depends on ETRAX_ARCH_V10 && NETDEVICES
+	select MII
+	help
+	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
+	  controller.
+
+config ETRAX_SERIAL
+	bool "Serial-port support"
+	depends on ETRAX_ARCH_V10
+	help
+	  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
+	  You probably want this enabled.
+
+config ETRAX_SERIAL_FAST_TIMER
+	bool "Use fast timers for serial DMA flush (experimental)"
+	depends on ETRAX_SERIAL
+	help
+	  Select this to have the serial DMAs flushed at a higher rate than
+	  normally, possible by using the fast timer API, the timeout is
+	  approx. 4 character times.
+	  If unsure, say N.
+
+config ETRAX_SERIAL_FLUSH_DMA_FAST
+	bool "Fast serial port DMA flush"
+	depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER
+	help
+	  Select this to have the serial DMAs flushed at a higher rate than
+	  normally possible through a fast timer interrupt (currently at
+	  15360 Hz).
+	  If unsure, say N.
+
+config ETRAX_SERIAL_RX_TIMEOUT_TICKS
+	int "Receive flush timeout (ticks) "
+	depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER && !ETRAX_SERIAL_FLUSH_DMA_FAST
+	default "5"
+	help
+	  Number of timer ticks between flush of receive fifo (1 tick = 10ms).
+	  Try 0-3 for low latency applications.  Approx 5 for high load
+	  applications (e.g. PPP).  Maybe this should be more adaptive some
+	  day...
+
+config ETRAX_SERIAL_PORT0
+	bool "Serial port 0 enabled"
+	depends on ETRAX_SERIAL
+	help
+	  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
+	  Normally you want this on, unless you use external DMA 1 that uses
+	  the same DMA channels.
+
+choice
+	prompt "Ser0 DTR, RI, DSR and CD assignment"
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
+	bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER0_DTR_RI_DSR_CD_ON_PA
+	bool "DTR_RI_DSR_CD_on_PA"
+
+config ETRAX_SER0_DTR_RI_DSR_CD_ON_PB
+	bool "DTR_RI_DSR_CD_on_PB"
+	help
+	  Enables the status and control signals DTR, RI, DSR and CD on PB for
+	  ser0.
+
+config ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER0_DTR_ON_PA_BIT
+	int "Ser0 DTR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_RI_ON_PA_BIT
+	int "Ser0 RI  on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_DSR_ON_PA_BIT
+	int "Ser0 DSR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_CD_ON_PA_BIT
+	int "Ser0 CD  on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_DTR_ON_PB_BIT
+	int "Ser0 DTR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the DTR signal for serial
+	  port 0.
+
+config ETRAX_SER0_RI_ON_PB_BIT
+	int "Ser0 RI  on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the RI signal for serial
+	  port 0.
+
+config ETRAX_SER0_DSR_ON_PB_BIT
+	int "Ser0 DSR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the DSR signal for serial
+	  port 0.
+
+config ETRAX_SER0_CD_ON_PB_BIT
+	int "Ser0 CD  on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT0
+	default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the CD signal for serial
+	  port 0.
+
+config ETRAX_SERIAL_PORT1
+	bool "Serial port 1 enabled"
+	depends on ETRAX_SERIAL
+	help
+	  Enables the ETRAX 100 serial driver for ser1 (ttyS1).
+
+choice
+	prompt "Ser1 DTR, RI, DSR and CD assignment"
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
+	bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER1_DTR_RI_DSR_CD_ON_PA
+	bool "DTR_RI_DSR_CD_on_PA"
+
+config ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
+	bool "DTR_RI_DSR_CD_on_PB"
+	help
+	  Enables the status and control signals DTR, RI, DSR and CD on PB for
+	  ser1.
+
+config ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER1_DTR_ON_PA_BIT
+	int "Ser1 DTR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_RI_ON_PA_BIT
+	int "Ser1 RI  on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_DSR_ON_PA_BIT
+	int "Ser1 DSR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_CD_ON_PA_BIT
+	int "Ser1 CD  on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_DTR_ON_PB_BIT
+	int "Ser1 DTR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the DTR signal for serial
+	  port 1.
+
+config ETRAX_SER1_RI_ON_PB_BIT
+	int "Ser1 RI  on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the RI signal for serial
+	  port 1.
+
+config ETRAX_SER1_DSR_ON_PB_BIT
+	int "Ser1 DSR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the DSR signal for serial
+	  port 1.
+
+config ETRAX_SER1_CD_ON_PB_BIT
+	int "Ser1 CD  on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT1
+	default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PB port to carry the CD signal for serial
+	  port 1.
+
+comment "Make sure you do not have the same PB bits more than once!"
+	depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
+
+config ETRAX_SERIAL_PORT2
+	bool "Serial port 2 enabled"
+	depends on ETRAX_SERIAL
+	help
+	  Enables the ETRAX 100 serial driver for ser2 (ttyS2).
+
+choice
+	prompt "Ser2 DTR, RI, DSR and CD assignment"
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
+	bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER2_DTR_RI_DSR_CD_ON_PA
+	bool "DTR_RI_DSR_CD_on_PA"
+	help
+	  Enables the status and control signals DTR, RI, DSR and CD on PA for
+	  ser2.
+
+config ETRAX_SER2_DTR_RI_DSR_CD_ON_PB
+	bool "DTR_RI_DSR_CD_on_PB"
+
+config ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER2_DTR_ON_PA_BIT
+	int "Ser2 DTR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PA port to carry the DTR signal for serial
+	  port 2.
+
+config ETRAX_SER2_RI_ON_PA_BIT
+	int "Ser2 RI  on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PA port to carry the RI signal for serial
+	  port 2.
+
+config ETRAX_SER2_DSR_ON_PA_BIT
+	int "Ser2 DSR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PA port to carry the DTR signal for serial
+	  port 2.
+
+config ETRAX_SER2_CD_ON_PA_BIT
+	int "Ser2 CD  on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	help
+	  Specify the pin of the PA port to carry the CD signal for serial
+	  port 2.
+
+config ETRAX_SER2_DTR_ON_PB_BIT
+	int "Ser2 DTR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER2_RI_ON_PB_BIT
+	int "Ser2 RI  on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER2_DSR_ON_PB_BIT
+	int "Ser2 DSR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER2_CD_ON_PB_BIT
+	int "Ser2 CD  on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT2
+	default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+	default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SERIAL_PORT3
+	bool "Serial port 3 enabled"
+	depends on ETRAX_SERIAL
+	help
+	  Enables the ETRAX 100 serial driver for ser3 (ttyS3).
+
+choice
+	prompt "Ser3 DTR, RI, DSR and CD assignment"
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
+	bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER3_DTR_RI_DSR_CD_ON_PA
+	bool "DTR_RI_DSR_CD_on_PA"
+
+config ETRAX_SER3_DTR_RI_DSR_CD_ON_PB
+	bool "DTR_RI_DSR_CD_on_PB"
+
+config ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER3_DTR_ON_PA_BIT
+	int "Ser3 DTR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_RI_ON_PA_BIT
+	int "Ser3 RI  on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_DSR_ON_PA_BIT
+	int "Ser3 DSR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_CD_ON_PA_BIT
+	int "Ser3 CD  on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_DTR_ON_PB_BIT
+	int "Ser3 DTR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_RI_ON_PB_BIT
+	int "Ser3 RI  on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_DSR_ON_PB_BIT
+	int "Ser3 DSR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_SER3_CD_ON_PB_BIT
+	int "Ser3 CD  on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+	depends on ETRAX_SERIAL_PORT3
+	default "-1"
+
+config ETRAX_RS485
+	bool "RS-485 support"
+	depends on ETRAX_SERIAL
+	help
+	  Enables support for RS-485 serial communication.  For a primer on
+	  RS-485, see <http://en.wikipedia.org/wiki/Rs485>
+
+config ETRAX_RS485_ON_PA
+	bool "RS-485 mode on PA"
+	depends on ETRAX_RS485
+	help
+	  Control Driver Output Enable on RS485 transceiver using a pin on PA
+	  port:
+	  Axis 2400/2401 uses PA 3.
+
+config ETRAX_RS485_ON_PA_BIT
+	int "RS-485 mode on PA bit"
+	depends on ETRAX_RS485_ON_PA
+	default "3"
+	help
+	  Control Driver Output Enable on RS485 transceiver using a this bit
+	  on PA port.
+
+config ETRAX_RS485_DISABLE_RECEIVER
+	bool "Disable serial receiver"
+	depends on ETRAX_RS485
+	help
+	  It's necessary to disable the serial receiver to avoid serial
+	  loopback.  Not all products are able to do this in software only.
+	  Axis 2400/2401 must disable receiver.
+
+config ETRAX_USB_HOST
+	bool "USB host"
+	select USB
+	help
+	   This option enables the host functionality of the ETRAX 100LX
+	   built-in USB controller. In host mode the controller is designed
+	   for CTRL and BULK traffic only, INTR traffic may work as well
+	   however (depending on the requirements of timeliness).
+
+config ETRAX_PTABLE_SECTOR
+	int "Byte-offset of partition table sector"
+	depends on ETRAX_AXISFLASHMAP
+	default "65536"
+	help
+	  Byte-offset of the partition table in the first flash chip.
+	  The default value is 64kB and should not be changed unless
+	  you know exactly what you are doing. The only valid reason
+	  for changing this is when the flash block size is bigger
+	  than 64kB (e.g. when using two parallel 16 bit flashes).
+
+config ETRAX_I2C
+	bool "I2C support"
+	depends on ETRAX_ARCH_V10
+	help
+	  Enables an I2C driver on ETRAX100.
+	  EXAMPLE usage:
+	  i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+	  ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+	  i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+	  val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+# this is true for most products since PB-I2C seems to be somewhat
+# flawed..
+config ETRAX_I2C_USES_PB_NOT_PB_I2C
+	bool "I2C uses PB not PB-I2C"
+	depends on ETRAX_I2C
+	help
+	  Select whether to use the special I2C mode in the PB I/O register or
+	  not.  This option needs to be selected in order to use some drivers
+	  that access the I2C I/O pins directly instead of going through the
+	  I2C driver, like the DS1302 realtime-clock driver.  If you are
+	  uncertain, choose Y here.
+
+config ETRAX_I2C_DATA_PORT
+	int "I2C SDA bit number"
+	depends on ETRAX_I2C_USES_PB_NOT_PB_I2C
+	default "0"
+	help
+	  Selects the pin on Port B where the data pin is connected
+
+config ETRAX_I2C_CLK_PORT
+	int "I2C SCL bit number"
+	depends on ETRAX_I2C_USES_PB_NOT_PB_I2C
+	default "1"
+	help
+	  Select the pin on Port B where the clock pin is connected
+
+config ETRAX_I2C_EEPROM
+	bool "I2C EEPROM (non-volatile RAM) support"
+	depends on ETRAX_I2C
+	help
+	  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
+	  driver.  Select size option: Probed, 2k, 8k, 16k.
+	  (Probing works for 2k and 8k but not that well for 16k)
+
+choice
+	prompt "EEPROM size"
+	depends on ETRAX_I2C_EEPROM
+	default ETRAX_I2C_EEPROM_PROBE
+
+config ETRAX_I2C_EEPROM_PROBE
+	bool "Probed"
+	help
+	  Specifies size or auto probe of the EEPROM size.
+	  Options: Probed, 2k, 8k, 16k.
+	  (Probing works for 2k and 8k but not that well for 16k)
+
+config ETRAX_I2C_EEPROM_2KB
+	bool "2kB"
+	help
+	  Use a 2kB EEPROM.
+
+config ETRAX_I2C_EEPROM_8KB
+	bool "8kB"
+	help
+	  Use a 8kB EEPROM.
+
+config ETRAX_I2C_EEPROM_16KB
+	bool "16kB"
+	help
+	  Use a 16kB EEPROM.
+
+endchoice
+
+config ETRAX_GPIO
+	bool "GPIO support"
+	depends on ETRAX_ARCH_V10
+	---help---
+	  Enables the ETRAX general port device (major 120, minors 0 and 1).
+	  You can use this driver to access the general port bits. It supports
+	  these ioctl's:
+	  #include <linux/etraxgpio.h>
+	  fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
+	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
+	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
+	  val = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS), NULL);
+	  Remember that you need to setup the port directions appropriately in
+	  the General configuration.
+
+config ETRAX_PA_CHANGEABLE_DIR
+	hex "PA user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "00"
+	help
+	  This is a bitmask with information of what bits in PA that a user
+	  can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 00 here.
+
+config ETRAX_PA_CHANGEABLE_BITS
+	hex "PA user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "FF"
+	help
+	  This is a bitmask with information of what bits in PA that a user
+	  can change the value on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 00 here.
+
+config ETRAX_PB_CHANGEABLE_DIR
+	hex "PB user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "00"
+	help
+	  This is a bitmask with information of what bits in PB that a user
+	  can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 00 here.
+
+config ETRAX_PB_CHANGEABLE_BITS
+	hex "PB user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "FF"
+	help
+	  This is a bitmask with information of what bits in PB that a user
+	  can change the value on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 00 here.
+
+endif
diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile
new file mode 100644
index 000000000..e5c13183b
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_AXISFLASHMAP)	+= axisflashmap.o
+obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
+obj-$(CONFIG_ETRAX_I2C_EEPROM)		+= eeprom.o
+obj-$(CONFIG_ETRAX_GPIO)		+= gpio.o
+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
+
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
new file mode 100644
index 000000000..a4bbdfd37
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -0,0 +1,432 @@
+/*
+ * Physical mapping layer for MTD using the Axis partitiontable format
+ *
+ * Copyright (c) 2001, 2002 Axis Communications AB
+ *
+ * This file is under the GPL.
+ *
+ * First partition is always sector 0 regardless of if we find a partitiontable
+ * or not. In the start of the next sector, there can be a partitiontable that
+ * tells us what other partitions to define. If there isn't, we use a default
+ * partition split defined below.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/concat.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/mtdram.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/axisflashmap.h>
+#include <asm/mmu.h>
+#include <arch/sv_addr_ag.h>
+
+#ifdef CONFIG_CRIS_LOW_MAP
+#define FLASH_UNCACHED_ADDR  KSEG_8
+#define FLASH_CACHED_ADDR    KSEG_5
+#else
+#define FLASH_UNCACHED_ADDR  KSEG_E
+#define FLASH_CACHED_ADDR    KSEG_F
+#endif
+
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==1
+#define flash_data __u8
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
+#define flash_data __u16
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
+#define flash_data __u32
+#endif
+
+/* From head.S */
+extern unsigned long romfs_start, romfs_length, romfs_in_flash;
+
+/* The master mtd for the entire flash. */
+struct mtd_info* axisflash_mtd = NULL;
+
+/* Map driver functions. */
+
+static map_word flash_read(struct map_info *map, unsigned long ofs)
+{
+	map_word tmp;
+	tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs);
+	return tmp;
+}
+
+static void flash_copy_from(struct map_info *map, void *to,
+			    unsigned long from, ssize_t len)
+{
+	memcpy(to, (void *)(map->map_priv_1 + from), len);
+}
+
+static void flash_write(struct map_info *map, map_word d, unsigned long adr)
+{
+	*(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0];
+}
+
+/*
+ * The map for chip select e0.
+ *
+ * We run into tricky coherence situations if we mix cached with uncached
+ * accesses to we only use the uncached version here.
+ *
+ * The size field is the total size where the flash chips may be mapped on the
+ * chip select. MTD probes should find all devices there and it does not matter
+ * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD
+ * probes will ignore them.
+ *
+ * The start address in map_priv_1 is in virtual memory so we cannot use
+ * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start
+ * address of cse0.
+ */
+static struct map_info map_cse0 = {
+	.name = "cse0",
+	.size = MEM_CSE0_SIZE,
+	.bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+	.read = flash_read,
+	.copy_from = flash_copy_from,
+	.write = flash_write,
+	.map_priv_1 = FLASH_UNCACHED_ADDR
+};
+
+/*
+ * The map for chip select e1.
+ *
+ * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong
+ * address, but there isn't.
+ */
+static struct map_info map_cse1 = {
+	.name = "cse1",
+	.size = MEM_CSE1_SIZE,
+	.bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+	.read = flash_read,
+	.copy_from = flash_copy_from,
+	.write = flash_write,
+	.map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE
+};
+
+/* If no partition-table was found, we use this default-set. */
+#define MAX_PARTITIONS         7
+#define NUM_DEFAULT_PARTITIONS 3
+
+/*
+ * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+ * size of one flash block and "filesystem"-partition needs 5 blocks to be able
+ * to use JFFS.
+ */
+static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+	{
+		.name = "boot firmware",
+		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0
+	},
+	{
+		.name = "kernel",
+		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+		.offset = CONFIG_ETRAX_PTABLE_SECTOR
+	},
+	{
+		.name = "filesystem",
+		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
+	}
+};
+
+/* Initialize the ones normally used. */
+static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
+	{
+		.name = "part0",
+		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0
+	},
+	{
+		.name = "part1",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part2",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part3",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part4",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part5",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part6",
+		.size = 0,
+		.offset = 0
+	},
+};
+
+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+/* Main flash device */
+static struct mtd_partition main_partition = {
+	.name = "main",
+	.size = 0,
+	.offset = 0
+};
+#endif
+
+/*
+ * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
+ * chips in that order (because the amd_flash-driver is faster).
+ */
+static struct mtd_info *probe_cs(struct map_info *map_cs)
+{
+	struct mtd_info *mtd_cs = NULL;
+
+	printk(KERN_INFO
+               "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
+	       map_cs->name, map_cs->size, map_cs->map_priv_1);
+
+#ifdef CONFIG_MTD_CFI
+	mtd_cs = do_map_probe("cfi_probe", map_cs);
+#endif
+#ifdef CONFIG_MTD_JEDECPROBE
+	if (!mtd_cs)
+		mtd_cs = do_map_probe("jedec_probe", map_cs);
+#endif
+
+	return mtd_cs;
+}
+
+/*
+ * Probe each chip select individually for flash chips. If there are chips on
+ * both cse0 and cse1, the mtd_info structs will be concatenated to one struct
+ * so that MTD partitions can cross chip boundries.
+ *
+ * The only known restriction to how you can mount your chips is that each
+ * chip select must hold similar flash chips. But you need external hardware
+ * to do that anyway and you can put totally different chips on cse0 and cse1
+ * so it isn't really much of a restriction.
+ */
+static struct mtd_info *flash_probe(void)
+{
+	struct mtd_info *mtd_cse0;
+	struct mtd_info *mtd_cse1;
+	struct mtd_info *mtd_cse;
+
+	mtd_cse0 = probe_cs(&map_cse0);
+	mtd_cse1 = probe_cs(&map_cse1);
+
+	if (!mtd_cse0 && !mtd_cse1) {
+		/* No chip found. */
+		return NULL;
+	}
+
+	if (mtd_cse0 && mtd_cse1) {
+		struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 };
+
+		/* Since the concatenation layer adds a small overhead we
+		 * could try to figure out if the chips in cse0 and cse1 are
+		 * identical and reprobe the whole cse0+cse1 window. But since
+		 * flash chips are slow, the overhead is relatively small.
+		 * So we use the MTD concatenation layer instead of further
+		 * complicating the probing procedure.
+		 */
+		mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds),
+					    "cse0+cse1");
+		if (!mtd_cse) {
+			printk(KERN_ERR "%s and %s: Concatenation failed!\n",
+			       map_cse0.name, map_cse1.name);
+
+			/* The best we can do now is to only use what we found
+			 * at cse0.
+			 */
+			mtd_cse = mtd_cse0;
+			map_destroy(mtd_cse1);
+		}
+	} else {
+		mtd_cse = mtd_cse0? mtd_cse0 : mtd_cse1;
+	}
+
+	return mtd_cse;
+}
+
+/*
+ * Probe the flash chip(s) and, if it succeeds, read the partition-table
+ * and register the partitions with MTD.
+ */
+static int __init init_axis_flash(void)
+{
+	struct mtd_info *mymtd;
+	int err = 0;
+	int pidx = 0;
+	struct partitiontable_head *ptable_head = NULL;
+	struct partitiontable_entry *ptable;
+	int use_default_ptable = 1; /* Until proven otherwise. */
+	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
+
+	if (!(mymtd = flash_probe())) {
+		/* There's no reason to use this module if no flash chip can
+		 * be identified. Make sure that's understood.
+		 */
+		printk(KERN_INFO "axisflashmap: Found no flash chip.\n");
+	} else {
+		printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n",
+		       mymtd->name, mymtd->size);
+		axisflash_mtd = mymtd;
+	}
+
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+		ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR +
+			      CONFIG_ETRAX_PTABLE_SECTOR +
+			      PARTITION_TABLE_OFFSET);
+	}
+	pidx++;  /* First partition is always set to the default. */
+
+	if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC)
+	    && (ptable_head->size <
+		(MAX_PARTITIONS * sizeof(struct partitiontable_entry) +
+		PARTITIONTABLE_END_MARKER_SIZE))
+	    && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) +
+				  ptable_head->size -
+				  PARTITIONTABLE_END_MARKER_SIZE)
+		== PARTITIONTABLE_END_MARKER)) {
+		/* Looks like a start, sane length and end of a
+		 * partition table, lets check csum etc.
+		 */
+		int ptable_ok = 0;
+		struct partitiontable_entry *max_addr =
+			(struct partitiontable_entry *)
+			((unsigned long)ptable_head + sizeof(*ptable_head) +
+			 ptable_head->size);
+		unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
+		unsigned char *p;
+		unsigned long csum = 0;
+
+		ptable = (struct partitiontable_entry *)
+			((unsigned long)ptable_head + sizeof(*ptable_head));
+
+		/* Lets be PARANOID, and check the checksum. */
+		p = (unsigned char*) ptable;
+
+		while (p <= (unsigned char*)max_addr) {
+			csum += *p++;
+			csum += *p++;
+			csum += *p++;
+			csum += *p++;
+		}
+		ptable_ok = (csum == ptable_head->checksum);
+
+		/* Read the entries and use/show the info.  */
+		printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n",
+		       (ptable_ok ? " valid" : "n invalid"), ptable_head,
+		       max_addr);
+
+		/* We have found a working bootblock.  Now read the
+		 * partition table.  Scan the table.  It ends when
+		 * there is 0xffffffff, that is, empty flash.
+		 */
+		while (ptable_ok
+		       && ptable->offset != 0xffffffff
+		       && ptable < max_addr
+		       && pidx < MAX_PARTITIONS) {
+
+			axis_partitions[pidx].offset = offset + ptable->offset;
+			axis_partitions[pidx].size = ptable->size;
+
+			printk(pmsg, pidx, axis_partitions[pidx].offset,
+			       axis_partitions[pidx].size);
+			pidx++;
+			ptable++;
+		}
+		use_default_ptable = !ptable_ok;
+	}
+
+	if (romfs_in_flash) {
+		/* Add an overlapping device for the root partition (romfs). */
+
+		axis_partitions[pidx].name = "romfs";
+		axis_partitions[pidx].size = romfs_length;
+		axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
+		axis_partitions[pidx].mask_flags |= MTD_WRITEABLE;
+
+		printk(KERN_INFO
+                       " Adding readonly flash partition for romfs image:\n");
+		printk(pmsg, pidx, axis_partitions[pidx].offset,
+		       axis_partitions[pidx].size);
+		pidx++;
+	}
+
+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+	if (mymtd) {
+		main_partition.size = mymtd->size;
+		err = mtd_device_register(mymtd, &main_partition, 1);
+		if (err)
+			panic("axisflashmap: Could not initialize "
+			      "partition for whole main mtd device!\n");
+	}
+#endif
+
+        if (mymtd) {
+		if (use_default_ptable) {
+			printk(KERN_INFO " Using default partition table.\n");
+			err = mtd_device_register(mymtd,
+						  axis_default_partitions,
+						  NUM_DEFAULT_PARTITIONS);
+		} else {
+			err = mtd_device_register(mymtd, axis_partitions,
+						  pidx);
+		}
+
+		if (err)
+			panic("axisflashmap could not add MTD partitions!\n");
+	}
+
+	if (!romfs_in_flash) {
+		/* Create an RAM device for the root partition (romfs). */
+
+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+		/* No use trying to boot this kernel from RAM. Panic! */
+		printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
+		       "device due to kernel (mis)configuration!\n");
+		panic("This kernel cannot boot from RAM!\n");
+#else
+		struct mtd_info *mtd_ram;
+
+		mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+		if (!mtd_ram)
+			panic("axisflashmap couldn't allocate memory for "
+			      "mtd_info!\n");
+
+		printk(KERN_INFO " Adding RAM partition for romfs image:\n");
+		printk(pmsg, pidx, (unsigned)romfs_start,
+			(unsigned)romfs_length);
+
+		err = mtdram_init_device(mtd_ram,
+			(void *)romfs_start,
+			romfs_length,
+			"romfs");
+		if (err)
+			panic("axisflashmap could not initialize MTD RAM "
+			      "device!\n");
+#endif
+	}
+	return err;
+}
+
+/* This adds the above to the kernels init-call chain. */
+module_init(init_axis_flash);
+
+EXPORT_SYMBOL(axisflash_mtd);
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
new file mode 100644
index 000000000..5047a3304
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -0,0 +1,852 @@
+/*!*****************************************************************************
+*!
+*!  Implements an interface for i2c compatible eeproms to run under Linux.
+*!  Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by
+*!  Johan.Adolfsson@axis.com
+*!
+*!  Probing results:
+*!    8k or not is detected (the assumes 2k or 16k)
+*!    2k or 16k detected using test reads and writes.
+*!
+*!------------------------------------------------------------------------
+*!  HISTORY
+*!
+*!  DATE          NAME              CHANGES
+*!  ----          ----              -------
+*!  Aug  28 1999  Edgar Iglesias    Initial Version
+*!  Aug  31 1999  Edgar Iglesias    Allow simultaneous users.
+*!  Sep  03 1999  Edgar Iglesias    Updated probe.
+*!  Sep  03 1999  Edgar Iglesias    Added bail-out stuff if we get interrupted
+*!                                  in the spin-lock.
+*!
+*!        (c) 1999 Axis Communications AB, Lund, Sweden
+*!*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <asm/uaccess.h>
+#include "i2c.h"
+
+#define D(x)
+
+/* If we should use adaptive timing or not: */
+/* #define EEPROM_ADAPTIVE_TIMING */
+
+#define EEPROM_MAJOR_NR 122  /* use a LOCAL/EXPERIMENTAL major for now */
+#define EEPROM_MINOR_NR 0
+
+/* Empirical sane initial value of the delay, the value will be adapted to
+ * what the chip needs when using EEPROM_ADAPTIVE_TIMING.
+ */
+#define INITIAL_WRITEDELAY_US 4000
+#define MAX_WRITEDELAY_US 10000 /* 10 ms according to spec for 2KB EEPROM */
+
+/* This one defines how many times to try when eeprom fails. */
+#define EEPROM_RETRIES 10
+
+#define EEPROM_2KB (2 * 1024)
+/*#define EEPROM_4KB (4 * 1024)*/ /* Exists but not used in Axis products */
+#define EEPROM_8KB (8 * 1024 - 1 ) /* Last byte has write protection bit */
+#define EEPROM_16KB (16 * 1024)
+
+#define i2c_delay(x) udelay(x)
+
+/*
+ *  This structure describes the attached eeprom chip.
+ *  The values are probed for.
+ */
+
+struct eeprom_type
+{
+  unsigned long size;
+  unsigned long sequential_write_pagesize;
+  unsigned char select_cmd;
+  unsigned long usec_delay_writecycles; /* Min time between write cycles
+					   (up to 10ms for some models) */
+  unsigned long usec_delay_step; /* For adaptive algorithm */
+  int adapt_state; /* 1 = To high , 0 = Even, -1 = To low */
+  
+  /* this one is to keep the read/write operations atomic */
+  struct mutex lock;
+  int retry_cnt_addr; /* Used to keep track of number of retries for
+                         adaptive timing adjustments */
+  int retry_cnt_read;
+};
+
+static int  eeprom_open(struct inode * inode, struct file * file);
+static loff_t  eeprom_lseek(struct file * file, loff_t offset, int orig);
+static ssize_t  eeprom_read(struct file * file, char * buf, size_t count,
+                            loff_t *off);
+static ssize_t  eeprom_write(struct file * file, const char * buf, size_t count,
+                             loff_t *off);
+static int eeprom_close(struct inode * inode, struct file * file);
+
+static int  eeprom_address(unsigned long addr);
+static int  read_from_eeprom(char * buf, int count);
+static int eeprom_write_buf(loff_t addr, const char * buf, int count);
+static int eeprom_read_buf(loff_t addr, char * buf, int count);
+
+static void eeprom_disable_write_protect(void);
+
+
+static const char eeprom_name[] = "eeprom";
+
+/* chip description */
+static struct eeprom_type eeprom;
+
+/* This is the exported file-operations structure for this device. */
+const struct file_operations eeprom_fops =
+{
+  .llseek  = eeprom_lseek,
+  .read    = eeprom_read,
+  .write   = eeprom_write,
+  .open    = eeprom_open,
+  .release = eeprom_close
+};
+
+/* eeprom init call. Probes for different eeprom models. */
+
+int __init eeprom_init(void)
+{
+  mutex_init(&eeprom.lock);
+
+#ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE
+#define EETEXT "Found"
+#else
+#define EETEXT "Assuming"
+#endif
+  if (register_chrdev(EEPROM_MAJOR_NR, eeprom_name, &eeprom_fops))
+  {
+    printk(KERN_INFO "%s: unable to get major %d for eeprom device\n",
+           eeprom_name, EEPROM_MAJOR_NR);
+    return -1;
+  }
+  
+  printk("EEPROM char device v0.3, (c) 2000 Axis Communications AB\n");
+
+  /*
+   *  Note: Most of this probing method was taken from the printserver (5470e)
+   *        codebase. It did not contain a way of finding the 16kB chips
+   *        (M24128 or variants). The method used here might not work
+   *        for all models. If you encounter problems the easiest way
+   *        is probably to define your model within #ifdef's, and hard-
+   *        code it.
+   */
+
+  eeprom.size = 0;
+  eeprom.usec_delay_writecycles = INITIAL_WRITEDELAY_US;
+  eeprom.usec_delay_step = 128;
+  eeprom.adapt_state = 0;
+  
+#ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE
+  i2c_start();
+  i2c_outbyte(0x80);
+  if(!i2c_getack())
+  {
+    /* It's not 8k.. */
+    int success = 0;
+    unsigned char buf_2k_start[16];
+    
+    /* Im not sure this will work... :) */
+    /* assume 2kB, if failure go for 16kB */
+    /* Test with 16kB settings.. */
+    /* If it's a 2kB EEPROM and we address it outside it's range
+     * it will mirror the address space:
+     * 1. We read two locations (that are mirrored), 
+     *    if the content differs * it's a 16kB EEPROM.
+     * 2. if it doesn't differ - write different value to one of the locations,
+     *    check the other - if content still is the same it's a 2k EEPROM,
+     *    restore original data.
+     */
+#define LOC1 8
+#define LOC2 (0x1fb) /*1fb, 3ed, 5df, 7d1 */
+
+   /* 2k settings */  
+    i2c_stop();
+    eeprom.size = EEPROM_2KB;
+    eeprom.select_cmd = 0xA0;   
+    eeprom.sequential_write_pagesize = 16;
+    if( eeprom_read_buf( 0, buf_2k_start, 16 ) == 16 )
+    {
+      D(printk("2k start: '%16.16s'\n", buf_2k_start));
+    }
+    else
+    {
+      printk(KERN_INFO "%s: Failed to read in 2k mode!\n", eeprom_name);  
+    }
+    
+    /* 16k settings */
+    eeprom.size = EEPROM_16KB;
+    eeprom.select_cmd = 0xA0;   
+    eeprom.sequential_write_pagesize = 64;
+
+    {
+      unsigned char loc1[4], loc2[4], tmp[4];
+      if( eeprom_read_buf(LOC2, loc2, 4) == 4)
+      {
+        if( eeprom_read_buf(LOC1, loc1, 4) == 4)
+        {
+          D(printk("0 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n", 
+                   LOC1, loc1, LOC2, loc2));
+#if 0
+          if (memcmp(loc1, loc2, 4) != 0 )
+          {
+            /* It's 16k */
+            printk(KERN_INFO "%s: 16k detected in step 1\n", eeprom_name);
+            eeprom.size = EEPROM_16KB;     
+            success = 1;
+          }
+          else
+#endif
+          {
+            /* Do step 2 check */
+            /* Invert value */
+            loc1[0] = ~loc1[0];
+            if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+            {
+              /* If 2k EEPROM this write will actually write 10 bytes
+               * from pos 0
+               */
+              D(printk("1 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n", 
+                       LOC1, loc1, LOC2, loc2));
+              if( eeprom_read_buf(LOC1, tmp, 4) == 4)
+              {
+                D(printk("2 loc1: (%i) '%4.4s' tmp '%4.4s'\n", 
+                         LOC1, loc1, tmp));
+                if (memcmp(loc1, tmp, 4) != 0 )
+                {
+                  printk(KERN_INFO "%s: read and write differs! Not 16kB\n",
+                         eeprom_name);
+                  loc1[0] = ~loc1[0];
+                  
+                  if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+                  {
+                    success = 1;
+                  }
+                  else
+                  {
+                    printk(KERN_INFO "%s: Restore 2k failed during probe,"
+                           " EEPROM might be corrupt!\n", eeprom_name);
+                    
+                  }
+                  i2c_stop();
+                  /* Go to 2k mode and write original data */
+                  eeprom.size = EEPROM_2KB;
+                  eeprom.select_cmd = 0xA0;   
+                  eeprom.sequential_write_pagesize = 16;
+                  if( eeprom_write_buf(0, buf_2k_start, 16) == 16)
+                  {
+                  }
+                  else
+                  {
+                    printk(KERN_INFO "%s: Failed to write back 2k start!\n",
+                           eeprom_name);
+                  }
+                  
+                  eeprom.size = EEPROM_2KB;
+                }
+              }
+                
+              if(!success)
+              {
+                if( eeprom_read_buf(LOC2, loc2, 1) == 1)
+                {
+                  D(printk("0 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n", 
+                           LOC1, loc1, LOC2, loc2));
+                  if (memcmp(loc1, loc2, 4) == 0 )
+                  {
+                    /* Data the same, must be mirrored -> 2k */
+                    /* Restore data */
+                    printk(KERN_INFO "%s: 2k detected in step 2\n", eeprom_name);
+                    loc1[0] = ~loc1[0];
+                    if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+                    {
+                      success = 1;
+                    }
+                    else
+                    {
+                      printk(KERN_INFO "%s: Restore 2k failed during probe,"
+                             " EEPROM might be corrupt!\n", eeprom_name);
+                      
+                    }
+                    
+                    eeprom.size = EEPROM_2KB;     
+                  }
+                  else
+                  {
+                    printk(KERN_INFO "%s: 16k detected in step 2\n",
+                           eeprom_name);
+                    loc1[0] = ~loc1[0];
+                    /* Data differs, assume 16k */
+                    /* Restore data */
+                    if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+                    {
+                      success = 1;
+                    }
+                    else
+                    {
+                      printk(KERN_INFO "%s: Restore 16k failed during probe,"
+                             " EEPROM might be corrupt!\n", eeprom_name);
+                    }
+                    
+                    eeprom.size = EEPROM_16KB;
+                  }
+                }
+              }
+            }
+          } /* read LOC1 */
+        } /* address LOC1 */
+        if (!success)
+        {
+          printk(KERN_INFO "%s: Probing failed!, using 2KB!\n", eeprom_name);
+          eeprom.size = EEPROM_2KB;               
+        }
+      } /* read */
+    }
+  }
+  else
+  {
+    i2c_outbyte(0x00);
+    if(!i2c_getack())
+    {
+      /* No 8k */
+      eeprom.size = EEPROM_2KB;
+    }
+    else
+    {
+      i2c_start();
+      i2c_outbyte(0x81);
+      if (!i2c_getack())
+      {
+        eeprom.size = EEPROM_2KB;
+      }
+      else
+      {
+        /* It's a 8kB */
+        i2c_inbyte();
+        eeprom.size = EEPROM_8KB;
+      }
+    }
+  }
+  i2c_stop();
+#elif defined(CONFIG_ETRAX_I2C_EEPROM_16KB)
+  eeprom.size = EEPROM_16KB;
+#elif defined(CONFIG_ETRAX_I2C_EEPROM_8KB)
+  eeprom.size = EEPROM_8KB;
+#elif defined(CONFIG_ETRAX_I2C_EEPROM_2KB)
+  eeprom.size = EEPROM_2KB;
+#endif
+
+  switch(eeprom.size)
+  {
+   case (EEPROM_2KB):
+     printk("%s: " EETEXT " i2c compatible 2kB eeprom.\n", eeprom_name);
+     eeprom.sequential_write_pagesize = 16;
+     eeprom.select_cmd = 0xA0;
+     break;
+   case (EEPROM_8KB):
+     printk("%s: " EETEXT " i2c compatible 8kB eeprom.\n", eeprom_name);
+     eeprom.sequential_write_pagesize = 16;
+     eeprom.select_cmd = 0x80;
+     break;
+   case (EEPROM_16KB):
+     printk("%s: " EETEXT " i2c compatible 16kB eeprom.\n", eeprom_name);
+     eeprom.sequential_write_pagesize = 64;
+     eeprom.select_cmd = 0xA0;     
+     break;
+   default:
+     eeprom.size = 0;
+     printk("%s: Did not find a supported eeprom\n", eeprom_name);
+     break;
+  }
+
+  
+
+  eeprom_disable_write_protect();
+
+  return 0;
+}
+
+/* Opens the device. */
+static int eeprom_open(struct inode * inode, struct file * file)
+{
+  if(iminor(inode) != EEPROM_MINOR_NR)
+     return -ENXIO;
+  if(imajor(inode) != EEPROM_MAJOR_NR)
+     return -ENXIO;
+
+  if( eeprom.size > 0 )
+  {
+    /* OK */
+    return 0;
+  }
+
+  /* No EEprom found */
+  return -EFAULT;
+}
+
+/* Changes the current file position. */
+
+static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig)
+{
+/*
+ *  orig 0: position from begning of eeprom
+ *  orig 1: relative from current position
+ *  orig 2: position from last eeprom address
+ */
+  
+  switch (orig)
+  {
+   case 0:
+     file->f_pos = offset;
+     break;
+   case 1:
+     file->f_pos += offset;
+     break;
+   case 2:
+     file->f_pos = eeprom.size - offset;
+     break;
+   default:
+     return -EINVAL;
+  }
+
+  /* truncate position */
+  if (file->f_pos < 0)
+  {
+    file->f_pos = 0;    
+    return(-EOVERFLOW);
+  }
+  
+  if (file->f_pos >= eeprom.size)
+  {
+    file->f_pos = eeprom.size - 1;
+    return(-EOVERFLOW);
+  }
+
+  return ( file->f_pos );
+}
+
+/* Reads data from eeprom. */
+
+static int eeprom_read_buf(loff_t addr, char * buf, int count)
+{
+  return eeprom_read(NULL, buf, count, &addr);
+}
+
+
+
+/* Reads data from eeprom. */
+
+static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t *off)
+{
+  int read=0;
+  unsigned long p = *off;
+
+  unsigned char page;
+
+  if(p >= eeprom.size)  /* Address i 0 - (size-1) */
+  {
+    return -EFAULT;
+  }
+  
+  if (mutex_lock_interruptible(&eeprom.lock))
+    return -EINTR;
+
+  page = (unsigned char) (p >> 8);
+  
+  if(!eeprom_address(p))
+  {
+    printk(KERN_INFO "%s: Read failed to address the eeprom: "
+           "0x%08X (%i) page: %i\n", eeprom_name, (int)p, (int)p, page);
+    i2c_stop();
+    
+    /* don't forget to wake them up */
+    mutex_unlock(&eeprom.lock);
+    return -EFAULT;
+  }
+
+  if( (p + count) > eeprom.size)
+  {
+    /* truncate count */
+    count = eeprom.size - p;
+  }
+
+  /* stop dummy write op and initiate the read op */
+  i2c_start();
+
+  /* special case for small eeproms */
+  if(eeprom.size < EEPROM_16KB)
+  {
+    i2c_outbyte( eeprom.select_cmd | 1 | (page << 1) );
+  }
+
+  /* go on with the actual read */
+  read = read_from_eeprom( buf, count);
+  
+  if(read > 0)
+  {
+    *off += read;
+  }
+
+  mutex_unlock(&eeprom.lock);
+  return read;
+}
+
+/* Writes data to eeprom. */
+
+static int eeprom_write_buf(loff_t addr, const char * buf, int count)
+{
+  return eeprom_write(NULL, buf, count, &addr);
+}
+
+
+/* Writes data to eeprom. */
+
+static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
+                            loff_t *off)
+{
+  int i, written, restart=1;
+  unsigned long p;
+
+  if (!access_ok(VERIFY_READ, buf, count))
+  {
+    return -EFAULT;
+  }
+
+  /* bail out if we get interrupted */
+  if (mutex_lock_interruptible(&eeprom.lock))
+    return -EINTR;
+  for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
+  {
+    restart = 0;
+    written = 0;
+    p = *off;
+   
+    
+    while( (written < count) && (p < eeprom.size))
+    {
+      /* address the eeprom */
+      if(!eeprom_address(p))
+      {
+        printk(KERN_INFO "%s: Write failed to address the eeprom: "
+               "0x%08X (%i) \n", eeprom_name, (int)p, (int)p);
+        i2c_stop();
+        
+        /* don't forget to wake them up */
+        mutex_unlock(&eeprom.lock);
+        return -EFAULT;
+      }
+#ifdef EEPROM_ADAPTIVE_TIMING      
+      /* Adaptive algorithm to adjust timing */
+      if (eeprom.retry_cnt_addr > 0)
+      {
+        /* To Low now */
+        D(printk(">D=%i d=%i\n",
+               eeprom.usec_delay_writecycles, eeprom.usec_delay_step));
+
+        if (eeprom.usec_delay_step < 4)
+        {
+          eeprom.usec_delay_step++;
+          eeprom.usec_delay_writecycles += eeprom.usec_delay_step;
+        }
+        else
+        {
+
+          if (eeprom.adapt_state > 0)
+          {
+            /* To Low before */
+            eeprom.usec_delay_step *= 2;
+            if (eeprom.usec_delay_step > 2)
+            {
+              eeprom.usec_delay_step--;
+            }
+            eeprom.usec_delay_writecycles += eeprom.usec_delay_step;
+          }
+          else if (eeprom.adapt_state < 0)
+          {
+            /* To High before (toggle dir) */
+            eeprom.usec_delay_writecycles += eeprom.usec_delay_step;
+            if (eeprom.usec_delay_step > 1)
+            {
+              eeprom.usec_delay_step /= 2;
+              eeprom.usec_delay_step--;
+            }
+          }
+        }
+
+        eeprom.adapt_state = 1;
+      }
+      else
+      {
+        /* To High (or good) now */
+        D(printk("<D=%i d=%i\n",
+               eeprom.usec_delay_writecycles, eeprom.usec_delay_step));
+        
+        if (eeprom.adapt_state < 0)
+        {
+          /* To High before */
+          if (eeprom.usec_delay_step > 1)
+          {
+            eeprom.usec_delay_step *= 2;
+            eeprom.usec_delay_step--;
+            
+            if (eeprom.usec_delay_writecycles > eeprom.usec_delay_step)
+            {
+              eeprom.usec_delay_writecycles -= eeprom.usec_delay_step;
+            }
+          }
+        }
+        else if (eeprom.adapt_state > 0)
+        {
+          /* To Low before (toggle dir) */
+          if (eeprom.usec_delay_writecycles > eeprom.usec_delay_step)
+          {
+            eeprom.usec_delay_writecycles -= eeprom.usec_delay_step;
+          }
+          if (eeprom.usec_delay_step > 1)
+          {
+            eeprom.usec_delay_step /= 2;
+            eeprom.usec_delay_step--;
+          }
+          
+          eeprom.adapt_state = -1;
+        }
+
+        if (eeprom.adapt_state > -100)
+        {
+          eeprom.adapt_state--;
+        }
+        else
+        {
+          /* Restart adaption */
+          D(printk("#Restart\n"));
+          eeprom.usec_delay_step++;
+        }
+      }
+#endif /* EEPROM_ADAPTIVE_TIMING */
+      /* write until we hit a page boundary or count */
+      do
+      {
+        i2c_outbyte(buf[written]);        
+        if(!i2c_getack())
+        {
+          restart=1;
+          printk(KERN_INFO "%s: write error, retrying. %d\n", eeprom_name, i);
+          i2c_stop();
+          break;
+        }
+        written++;
+        p++;        
+      } while( written < count && ( p % eeprom.sequential_write_pagesize ));
+
+      /* end write cycle */
+      i2c_stop();
+      i2c_delay(eeprom.usec_delay_writecycles);
+    } /* while */
+  } /* for  */
+
+  mutex_unlock(&eeprom.lock);
+  if (written == 0 && p >= eeprom.size){
+    return -ENOSPC;
+  }
+  *off = p;
+  return written;
+}
+
+/* Closes the device. */
+
+static int eeprom_close(struct inode * inode, struct file * file)
+{
+  /* do nothing for now */
+  return 0;
+}
+
+/* Sets the current address of the eeprom. */
+
+static int eeprom_address(unsigned long addr)
+{
+  int i;
+  unsigned char page, offset;
+
+  page   = (unsigned char) (addr >> 8);
+  offset = (unsigned char)  addr;
+
+  for(i = 0; i < EEPROM_RETRIES; i++)
+  {
+    /* start a dummy write for addressing */
+    i2c_start();
+
+    if(eeprom.size == EEPROM_16KB)
+    {
+      i2c_outbyte( eeprom.select_cmd ); 
+      i2c_getack();
+      i2c_outbyte(page); 
+    }
+    else
+    {
+      i2c_outbyte( eeprom.select_cmd | (page << 1) ); 
+    }
+    if(!i2c_getack())
+    {
+      /* retry */
+      i2c_stop();
+      /* Must have a delay here.. 500 works, >50, 100->works 5th time*/
+      i2c_delay(MAX_WRITEDELAY_US / EEPROM_RETRIES * i);
+      /* The chip needs up to 10 ms from write stop to next start */
+     
+    }
+    else
+    {
+      i2c_outbyte(offset);
+      
+      if(!i2c_getack())
+      {
+        /* retry */
+        i2c_stop();
+      }
+      else
+        break;
+    }
+  }    
+
+  
+  eeprom.retry_cnt_addr = i;
+  D(printk("%i\n", eeprom.retry_cnt_addr));
+  if(eeprom.retry_cnt_addr == EEPROM_RETRIES)
+  {
+    /* failed */
+    return 0;
+  }
+  return 1;
+}
+
+/* Reads from current address. */
+
+static int read_from_eeprom(char * buf, int count)
+{
+  int i, read=0;
+
+  for(i = 0; i < EEPROM_RETRIES; i++)
+  {    
+    if(eeprom.size == EEPROM_16KB)
+    {
+      i2c_outbyte( eeprom.select_cmd | 1 );
+    }
+
+    if(i2c_getack())
+    {
+      break;
+    }
+  }
+  
+  if(i == EEPROM_RETRIES)
+  {
+    printk(KERN_INFO "%s: failed to read from eeprom\n", eeprom_name);
+    i2c_stop();
+    
+    return -EFAULT;
+  }
+
+  while( (read < count))
+  {    
+    if (put_user(i2c_inbyte(), &buf[read++]))
+    {
+      i2c_stop();
+
+      return -EFAULT;
+    }
+
+    /*
+     *  make sure we don't ack last byte or you will get very strange
+     *  results!
+     */
+    if(read < count)
+    {
+      i2c_sendack();
+    }
+  }
+
+  /* stop the operation */
+  i2c_stop();
+
+  return read;
+}
+
+/* Disables write protection if applicable. */
+
+#define DBP_SAVE(x)
+#define ax_printf printk
+static void eeprom_disable_write_protect(void)
+{
+  /* Disable write protect */
+  if (eeprom.size == EEPROM_8KB)
+  {
+    /* Step 1 Set WEL = 1 (write 00000010 to address 1FFFh */
+    i2c_start();
+    i2c_outbyte(0xbe);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false\n"));
+    }
+    i2c_outbyte(0xFF);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 2\n"));
+    }
+    i2c_outbyte(0x02);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 3\n"));
+    }
+    i2c_stop();
+
+    i2c_delay(1000);
+
+    /* Step 2 Set RWEL = 1 (write 00000110 to address 1FFFh */
+    i2c_start();
+    i2c_outbyte(0xbe);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 55\n"));
+    }
+    i2c_outbyte(0xFF);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 52\n"));
+    }
+    i2c_outbyte(0x06);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 53\n"));
+    }
+    i2c_stop();
+    
+    /* Step 3 Set BP1, BP0, and/or WPEN bits (write 00000110 to address 1FFFh */
+    i2c_start();
+    i2c_outbyte(0xbe);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 56\n"));
+    }
+    i2c_outbyte(0xFF);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 57\n"));
+    }
+    i2c_outbyte(0x06);
+    if(!i2c_getack())
+    {
+      DBP_SAVE(ax_printf("Get ack returns false 58\n"));
+    }
+    i2c_stop();
+    
+    /* Write protect disabled */
+  }
+}
+
+module_init(eeprom_init);
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
new file mode 100644
index 000000000..64285e0d3
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -0,0 +1,856 @@
+/*
+ * Etrax general port I/O device
+ *
+ * Copyright (c) 1999-2007 Axis Communications AB
+ *
+ * Authors:    Bjorn Wesen      (initial version)
+ *             Ola Knutsson     (LED handling)
+ *             Johan Adolfsson  (read/set directions, write, port G)
+ */
+
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <asm/etraxgpio.h>
+#include <arch/svinto.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <arch/io_interface_mux.h>
+
+#define GPIO_MAJOR 120  /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file *file, const char __user *buf,
+	size_t count, loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+	struct gpio_private *next;
+	/* These fields are for PA and PB only */
+	volatile unsigned char *port, *shadow;
+	volatile unsigned char *dir, *dir_shadow;
+	unsigned char changeable_dir;
+	unsigned char changeable_bits;
+	unsigned char clk_mask;
+	unsigned char data_mask;
+	unsigned char write_msb;
+	unsigned char pad1, pad2, pad3;
+	/* These fields are generic */
+	unsigned long highalarm, lowalarm;
+	wait_queue_head_t alarm_wq;
+	int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist;
+
+static int gpio_some_alarms; /* Set if someone uses alarm */
+static unsigned long gpio_pa_irq_enabled_mask;
+
+static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */
+
+/* Port A and B use 8 bit access, but Port G is 32 bit */
+#define NUM_PORTS (GPIO_MINOR_B+1)
+
+static volatile unsigned char *ports[NUM_PORTS] = {
+	R_PORT_PA_DATA,
+	R_PORT_PB_DATA,
+};
+static volatile unsigned char *shads[NUM_PORTS] = {
+	&port_pa_data_shadow,
+	&port_pb_data_shadow
+};
+
+/* What direction bits that are user changeable 1=changeable*/
+#ifndef CONFIG_ETRAX_PA_CHANGEABLE_DIR
+#define CONFIG_ETRAX_PA_CHANGEABLE_DIR 0x00
+#endif
+#ifndef CONFIG_ETRAX_PB_CHANGEABLE_DIR
+#define CONFIG_ETRAX_PB_CHANGEABLE_DIR 0x00
+#endif
+
+#ifndef CONFIG_ETRAX_PA_CHANGEABLE_BITS
+#define CONFIG_ETRAX_PA_CHANGEABLE_BITS 0xFF
+#endif
+#ifndef CONFIG_ETRAX_PB_CHANGEABLE_BITS
+#define CONFIG_ETRAX_PB_CHANGEABLE_BITS 0xFF
+#endif
+
+
+static unsigned char changeable_dir[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PB_CHANGEABLE_DIR
+};
+static unsigned char changeable_bits[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PB_CHANGEABLE_BITS
+};
+
+static volatile unsigned char *dir[NUM_PORTS] = {
+	R_PORT_PA_DIR,
+	R_PORT_PB_DIR
+};
+
+static volatile unsigned char *dir_shadow[NUM_PORTS] = {
+	&port_pa_dir_shadow,
+	&port_pb_dir_shadow
+};
+
+/* All bits in port g that can change dir. */
+static const unsigned long int changeable_dir_g_mask = 0x01FFFF01;
+
+/* Port G is 32 bit, handle it special, some bits are both inputs
+   and outputs at the same time, only some of the bits can change direction
+   and some of them in groups of 8 bit. */
+static unsigned long changeable_dir_g;
+static unsigned long dir_g_in_bits;
+static unsigned long dir_g_out_bits;
+static unsigned long dir_g_shadow; /* 1=output */
+
+#define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B)
+
+
+static unsigned int gpio_poll(struct file *file, poll_table *wait)
+{
+	unsigned int mask = 0;
+	struct gpio_private *priv = file->private_data;
+	unsigned long data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	poll_wait(file, &priv->alarm_wq, wait);
+	if (priv->minor == GPIO_MINOR_A) {
+		unsigned long tmp;
+		data = *R_PORT_PA_DATA;
+		/* PA has support for high level interrupt -
+		 * lets activate for those low and with highalarm set
+		 */
+		tmp = ~data & priv->highalarm & 0xFF;
+		tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR);
+
+		gpio_pa_irq_enabled_mask |= tmp;
+		*R_IRQ_MASK1_SET = tmp;
+	} else if (priv->minor == GPIO_MINOR_B)
+		data = *R_PORT_PB_DATA;
+	else if (priv->minor == GPIO_MINOR_G)
+		data = *R_PORT_G_DATA;
+	else {
+		mask = 0;
+		goto out;
+	}
+
+	if ((data & priv->highalarm) ||
+	    (~data & priv->lowalarm)) {
+		mask = POLLIN|POLLRDNORM;
+	}
+
+out:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+
+	return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+	struct gpio_private *priv;
+	unsigned long data = 0;
+        int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	priv = alarmlist;
+	while (priv) {
+		if (USE_PORTS(priv))
+			data = *priv->port;
+		else if (priv->minor == GPIO_MINOR_G)
+			data = *R_PORT_G_DATA;
+
+		if ((data & priv->highalarm) ||
+		    (~data & priv->lowalarm)) {
+			DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
+			wake_up_interruptible(&priv->alarm_wq);
+                        ret = 1;
+		}
+		priv = priv->next;
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+        return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id)
+{
+	if (gpio_some_alarms) {
+		etrax_gpio_wake_up_check();
+                return IRQ_HANDLED;
+	}
+        return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_interrupt(int irq, void *dev_id)
+{
+	unsigned long tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* Find what PA interrupts are active */
+	tmp = (*R_IRQ_READ1);
+
+	/* Find those that we have enabled */
+	tmp &= gpio_pa_irq_enabled_mask;
+
+	/* Clear them.. */
+	*R_IRQ_MASK1_CLR = tmp;
+	gpio_pa_irq_enabled_mask &= ~tmp;
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	if (gpio_some_alarms)
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+
+        return IRQ_NONE;
+}
+
+static void gpio_write_bit(struct gpio_private *priv,
+	unsigned char data, int bit)
+{
+	*priv->port = *priv->shadow &= ~(priv->clk_mask);
+	if (data & 1 << bit)
+		*priv->port = *priv->shadow |= priv->data_mask;
+	else
+		*priv->port = *priv->shadow &= ~(priv->data_mask);
+
+	/* For FPGA: min 5.0ns (DCC) before CCLK high */
+	*priv->port = *priv->shadow |= priv->clk_mask;
+}
+
+static void gpio_write_byte(struct gpio_private *priv, unsigned char data)
+{
+	int i;
+
+	if (priv->write_msb)
+		for (i = 7; i >= 0; i--)
+			gpio_write_bit(priv, data, i);
+	else
+		for (i = 0; i <= 7; i++)
+			gpio_write_bit(priv, data, i);
+}
+
+static ssize_t gpio_write(struct file *file, const char __user *buf,
+	size_t count, loff_t *off)
+{
+	struct gpio_private *priv = file->private_data;
+	unsigned long flags;
+	ssize_t retval = count;
+
+	if (priv->minor != GPIO_MINOR_A && priv->minor != GPIO_MINOR_B)
+		return -EFAULT;
+
+	if (!access_ok(VERIFY_READ, buf, count))
+		return -EFAULT;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* It must have been configured using the IO_CFG_WRITE_MODE */
+	/* Perhaps a better error code? */
+	if (priv->clk_mask == 0 || priv->data_mask == 0) {
+		retval = -EPERM;
+		goto out;
+	}
+
+	D(printk(KERN_DEBUG "gpio_write: %02X to data 0x%02X "
+		"clk 0x%02X msb: %i\n",
+		count, priv->data_mask, priv->clk_mask, priv->write_msb));
+
+	while (count--)
+		gpio_write_byte(priv, *buf++);
+
+out:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *priv;
+	int p = iminor(inode);
+	unsigned long flags;
+
+	if (p > GPIO_MINOR_LAST)
+		return -EINVAL;
+
+	priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL);
+
+	if (!priv)
+		return -ENOMEM;
+
+	priv->minor = p;
+
+	/* initialize the io/alarm struct */
+
+	if (USE_PORTS(priv)) { /* A and B */
+		priv->port = ports[p];
+		priv->shadow = shads[p];
+		priv->dir = dir[p];
+		priv->dir_shadow = dir_shadow[p];
+		priv->changeable_dir = changeable_dir[p];
+		priv->changeable_bits = changeable_bits[p];
+	} else {
+		priv->port = NULL;
+		priv->shadow = NULL;
+		priv->dir = NULL;
+		priv->dir_shadow = NULL;
+		priv->changeable_dir = 0;
+		priv->changeable_bits = 0;
+	}
+
+	priv->highalarm = 0;
+	priv->lowalarm = 0;
+	priv->clk_mask = 0;
+	priv->data_mask = 0;
+	init_waitqueue_head(&priv->alarm_wq);
+
+	filp->private_data = priv;
+
+	/* link it into our alarmlist */
+	spin_lock_irqsave(&gpio_lock, flags);
+	priv->next = alarmlist;
+	alarmlist = priv;
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *p;
+	struct gpio_private *todel;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	p = alarmlist;
+	todel = filp->private_data;
+
+	/* unlink from alarmlist and free the private structure */
+
+	if (p == todel) {
+		alarmlist = todel->next;
+	} else {
+		while (p->next != todel)
+			p = p->next;
+		p->next = todel->next;
+	}
+
+	kfree(todel);
+	/* Check if there are still any alarms set */
+	p = alarmlist;
+	while (p) {
+		if (p->highalarm | p->lowalarm) {
+			gpio_some_alarms = 1;
+			goto out;
+		}
+		p = p->next;
+	}
+	gpio_some_alarms = 0;
+out:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+{
+	/* Set direction 0=unchanged 1=input,
+	 * return mask with 1=input */
+	if (USE_PORTS(priv)) {
+		*priv->dir = *priv->dir_shadow &=
+		~((unsigned char)arg & priv->changeable_dir);
+		return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */
+	}
+
+	if (priv->minor != GPIO_MINOR_G)
+		return 0;
+
+	/* We must fiddle with R_GEN_CONFIG to change dir */
+	if (((arg & dir_g_in_bits) != arg) &&
+	    (arg & changeable_dir_g)) {
+		arg &= changeable_dir_g;
+		/* Clear bits in genconfig to set to input */
+		if (arg & (1<<0)) {
+			genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g0dir);
+			dir_g_in_bits |= (1<<0);
+			dir_g_out_bits &= ~(1<<0);
+		}
+		if ((arg & 0x0000FF00) == 0x0000FF00) {
+			genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g8_15dir);
+			dir_g_in_bits |= 0x0000FF00;
+			dir_g_out_bits &= ~0x0000FF00;
+		}
+		if ((arg & 0x00FF0000) == 0x00FF0000) {
+			genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g16_23dir);
+			dir_g_in_bits |= 0x00FF0000;
+			dir_g_out_bits &= ~0x00FF0000;
+		}
+		if (arg & (1<<24)) {
+			genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, g24dir);
+			dir_g_in_bits |= (1<<24);
+			dir_g_out_bits &= ~(1<<24);
+		}
+		D(printk(KERN_DEBUG "gpio: SETINPUT on port G set "
+			 "genconfig to 0x%08lX "
+			 "in_bits: 0x%08lX "
+			 "out_bits: 0x%08lX\n",
+			 (unsigned long)genconfig_shadow,
+			 dir_g_in_bits, dir_g_out_bits));
+		*R_GEN_CONFIG = genconfig_shadow;
+		/* Must be a >120 ns delay before writing this again */
+
+	}
+	return dir_g_in_bits;
+} /* setget_input */
+
+unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+{
+	if (USE_PORTS(priv)) {
+		*priv->dir = *priv->dir_shadow |=
+			((unsigned char)arg & priv->changeable_dir);
+		return *priv->dir_shadow;
+	}
+	if (priv->minor != GPIO_MINOR_G)
+		return 0;
+
+	/* We must fiddle with R_GEN_CONFIG to change dir */
+	if (((arg & dir_g_out_bits) != arg) &&
+	    (arg & changeable_dir_g)) {
+		/* Set bits in genconfig to set to output */
+		if (arg & (1<<0)) {
+			genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g0dir);
+			dir_g_out_bits |= (1<<0);
+			dir_g_in_bits &= ~(1<<0);
+		}
+		if ((arg & 0x0000FF00) == 0x0000FF00) {
+			genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g8_15dir);
+			dir_g_out_bits |= 0x0000FF00;
+			dir_g_in_bits &= ~0x0000FF00;
+		}
+		if ((arg & 0x00FF0000) == 0x00FF0000) {
+			genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g16_23dir);
+			dir_g_out_bits |= 0x00FF0000;
+			dir_g_in_bits &= ~0x00FF0000;
+		}
+		if (arg & (1<<24)) {
+			genconfig_shadow |= IO_MASK(R_GEN_CONFIG, g24dir);
+			dir_g_out_bits |= (1<<24);
+			dir_g_in_bits &= ~(1<<24);
+		}
+		D(printk(KERN_INFO "gpio: SETOUTPUT on port G set "
+			 "genconfig to 0x%08lX "
+			 "in_bits: 0x%08lX "
+			 "out_bits: 0x%08lX\n",
+			 (unsigned long)genconfig_shadow,
+			 dir_g_in_bits, dir_g_out_bits));
+		*R_GEN_CONFIG = genconfig_shadow;
+		/* Must be a >120 ns delay before writing this again */
+	}
+	return dir_g_out_bits & 0x7FFFFFFF;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long val;
+        int ret = 0;
+
+	struct gpio_private *priv = file->private_data;
+	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
+		return -EINVAL;
+
+	switch (_IOC_NR(cmd)) {
+	case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+		// read the port
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (USE_PORTS(priv)) {
+			ret =  *priv->port;
+		} else if (priv->minor == GPIO_MINOR_G) {
+			ret =  (*R_PORT_G_DATA) & 0x7FFFFFFF;
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
+		break;
+	case IO_SETBITS:
+		// set changeable bits with a 1 in arg
+		spin_lock_irqsave(&gpio_lock, flags);
+
+		if (USE_PORTS(priv)) {
+			*priv->port = *priv->shadow |=
+			  ((unsigned char)arg & priv->changeable_bits);
+		} else if (priv->minor == GPIO_MINOR_G) {
+			*R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
+		break;
+	case IO_CLRBITS:
+		// clear changeable bits with a 1 in arg
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (USE_PORTS(priv)) {
+			*priv->port = *priv->shadow &=
+			 ~((unsigned char)arg & priv->changeable_bits);
+		} else if (priv->minor == GPIO_MINOR_G) {
+			*R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_HIGHALARM:
+		// set alarm when bits with 1 in arg go high
+		spin_lock_irqsave(&gpio_lock, flags);
+		priv->highalarm |= arg;
+		gpio_some_alarms = 1;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_LOWALARM:
+		// set alarm when bits with 1 in arg go low
+		spin_lock_irqsave(&gpio_lock, flags);
+		priv->lowalarm |= arg;
+		gpio_some_alarms = 1;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_CLRALARM:
+		/* clear alarm for bits with 1 in arg */
+		spin_lock_irqsave(&gpio_lock, flags);
+		priv->highalarm &= ~arg;
+		priv->lowalarm  &= ~arg;
+		{
+			/* Must update gpio_some_alarms */
+			struct gpio_private *p = alarmlist;
+			int some_alarms;
+			p = alarmlist;
+			some_alarms = 0;
+			while (p) {
+				if (p->highalarm | p->lowalarm) {
+					some_alarms = 1;
+					break;
+				}
+				p = p->next;
+			}
+			gpio_some_alarms = some_alarms;
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+		/* Read direction 0=input 1=output */
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (USE_PORTS(priv)) {
+			ret = *priv->dir_shadow;
+		} else if (priv->minor == GPIO_MINOR_G) {
+			/* Note: Some bits are both in and out,
+			 * Those that are dual is set here as well.
+			 */
+			ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+		/* Set direction 0=unchanged 1=input,
+		 * return mask with 1=input
+		 */
+		spin_lock_irqsave(&gpio_lock, flags);
+		ret = setget_input(priv, arg) & 0x7FFFFFFF;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+		/* Set direction 0=unchanged 1=output,
+		 * return mask with 1=output
+		 */
+		spin_lock_irqsave(&gpio_lock, flags);
+		ret =  setget_output(priv, arg) & 0x7FFFFFFF;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_SHUTDOWN:
+		spin_lock_irqsave(&gpio_lock, flags);
+		SOFT_SHUTDOWN();
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_GET_PWR_BT:
+		spin_lock_irqsave(&gpio_lock, flags);
+#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
+		ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
+#else
+		ret = 0;
+#endif
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_CFG_WRITE_MODE:
+		spin_lock_irqsave(&gpio_lock, flags);
+		priv->clk_mask = arg & 0xFF;
+		priv->data_mask = (arg >> 8) & 0xFF;
+		priv->write_msb = (arg >> 16) & 0x01;
+		/* Check if we're allowed to change the bits and
+		 * the direction is correct
+		 */
+		if (!((priv->clk_mask & priv->changeable_bits) &&
+		      (priv->data_mask & priv->changeable_bits) &&
+		      (priv->clk_mask & *priv->dir_shadow) &&
+		      (priv->data_mask & *priv->dir_shadow)))
+		{
+			priv->clk_mask = 0;
+			priv->data_mask = 0;
+			ret = -EPERM;
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		break;
+	case IO_READ_INBITS:
+		/* *arg is result of reading the input pins */
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (USE_PORTS(priv)) {
+			val = *priv->port;
+		} else if (priv->minor == GPIO_MINOR_G) {
+			val = *R_PORT_G_DATA;
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
+			ret = -EFAULT;
+		break;
+	case IO_READ_OUTBITS:
+		 /* *arg is result of reading the output shadow */
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (USE_PORTS(priv)) {
+			val = *priv->shadow;
+		} else if (priv->minor == GPIO_MINOR_G) {
+			val = port_g_data_shadow;
+		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
+			ret = -EFAULT;
+		break;
+	case IO_SETGET_INPUT:
+		/* bits set in *arg is set to input,
+		 * *arg updated with current input pins.
+		 */
+		if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
+		{
+			ret = -EFAULT;
+			break;
+		}
+		spin_lock_irqsave(&gpio_lock, flags);
+		val = setget_input(priv, val);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
+			ret = -EFAULT;
+		break;
+	case IO_SETGET_OUTPUT:
+		/* bits set in *arg is set to output,
+		 * *arg updated with current output pins.
+		 */
+		if (copy_from_user(&val, (void __user *)arg, sizeof(val))) {
+			ret = -EFAULT;
+			break;
+		}
+		spin_lock_irqsave(&gpio_lock, flags);
+		val = setget_output(priv, val);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
+			ret = -EFAULT;
+		break;
+	default:
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (priv->minor == GPIO_MINOR_LEDS)
+			ret = gpio_leds_ioctl(cmd, arg);
+		else
+			ret = -EINVAL;
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	} /* switch */
+
+	return ret;
+}
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+	unsigned char green;
+	unsigned char red;
+
+	switch (_IOC_NR(cmd)) {
+	case IO_LEDACTIVE_SET:
+		green = ((unsigned char)arg) & 1;
+		red   = (((unsigned char)arg) >> 1) & 1;
+		CRIS_LED_ACTIVE_SET_G(green);
+		CRIS_LED_ACTIVE_SET_R(red);
+		break;
+
+	case IO_LED_SETBIT:
+		CRIS_LED_BIT_SET(arg);
+		break;
+
+	case IO_LED_CLRBIT:
+		CRIS_LED_BIT_CLR(arg);
+		break;
+
+	default:
+		return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+static const struct file_operations gpio_fops = {
+	.owner          = THIS_MODULE,
+	.poll           = gpio_poll,
+	.unlocked_ioctl = gpio_ioctl,
+	.write          = gpio_write,
+	.open           = gpio_open,
+	.release        = gpio_release,
+	.llseek		= noop_llseek,
+};
+
+static void ioif_watcher(const unsigned int gpio_in_available,
+	const unsigned int gpio_out_available,
+	const unsigned char pa_available,
+	const unsigned char pb_available)
+{
+	unsigned long int flags;
+
+	D(printk(KERN_DEBUG "gpio.c: ioif_watcher called\n"));
+	D(printk(KERN_DEBUG "gpio.c: G in: 0x%08x G out: 0x%08x "
+		"PA: 0x%02x PB: 0x%02x\n",
+		gpio_in_available, gpio_out_available,
+		pa_available, pb_available));
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	dir_g_in_bits = gpio_in_available;
+	dir_g_out_bits = gpio_out_available;
+
+	/* Initialise the dir_g_shadow etc. depending on genconfig */
+	/* 0=input 1=output */
+	if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out))
+		dir_g_shadow |= (1 << 0);
+	if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out))
+		dir_g_shadow |= 0x0000FF00;
+	if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g16_23dir, out))
+		dir_g_shadow |= 0x00FF0000;
+	if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out))
+		dir_g_shadow |= (1 << 24);
+
+	changeable_dir_g = changeable_dir_g_mask;
+	changeable_dir_g &= dir_g_out_bits;
+	changeable_dir_g &= dir_g_in_bits;
+
+	/* Correct the bits that can change direction */
+	dir_g_out_bits &= ~changeable_dir_g;
+	dir_g_out_bits |= dir_g_shadow;
+	dir_g_in_bits &= ~changeable_dir_g;
+	dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX "
+		"val: %08lX\n",
+	       dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA);
+	printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n",
+	       dir_g_shadow, changeable_dir_g);
+}
+
+/* main driver initialization routine, called from mem.c */
+
+static int __init gpio_init(void)
+{
+	int res;
+#if defined (CONFIG_ETRAX_CSP0_LEDS)
+	int i;
+#endif
+
+	res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+	if (res < 0) {
+		printk(KERN_ERR "gpio: couldn't get a major number.\n");
+		return res;
+	}
+
+	/* Clear all leds */
+#if defined (CONFIG_ETRAX_CSP0_LEDS) ||  defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
+	CRIS_LED_NETWORK_SET(0);
+	CRIS_LED_ACTIVE_SET(0);
+	CRIS_LED_DISK_READ(0);
+	CRIS_LED_DISK_WRITE(0);
+
+#if defined (CONFIG_ETRAX_CSP0_LEDS)
+	for (i = 0; i < 32; i++)
+		CRIS_LED_BIT_SET(i);
+#endif
+
+#endif
+	/* The I/O interface allocation watcher will be called when
+	 * registering it. */
+	if (cris_io_interface_register_watcher(ioif_watcher)){
+		printk(KERN_WARNING "gpio_init: Failed to install IO "
+			"if allocator watcher\n");
+	}
+
+	printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001-2008 "
+		"Axis Communications AB\n");
+	/* We call etrax_gpio_wake_up_check() from timer interrupt and
+	 * from default_idle() in kernel/process.c
+	 * The check in default_idle() reduces latency from ~15 ms to ~6 ms
+	 * in some tests.
+	 */
+	res = request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt,
+		IRQF_SHARED, "gpio poll", gpio_name);
+	if (res) {
+		printk(KERN_CRIT "err: timer0 irq for gpio\n");
+		return res;
+	}
+	res = request_irq(PA_IRQ_NBR, gpio_interrupt,
+		IRQF_SHARED, "gpio PA", gpio_name);
+	if (res)
+		printk(KERN_CRIT "err: PA irq for gpio\n");
+
+	return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+module_init(gpio_init);
+
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
new file mode 100644
index 000000000..b3d1f9ed1
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -0,0 +1,698 @@
+/*!***************************************************************************
+*!
+*! FILE NAME  : i2c.c
+*!
+*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
+*!              kernel modules (i2c_writereg/readreg) and from userspace using
+*!              ioctl()'s
+*!
+*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
+*!
+*!***************************************************************************/
+
+/****************** INCLUDE FILES SECTION ***********************************/
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/etraxi2c.h>
+
+#include <arch/svinto.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <arch/io_interface_mux.h>
+
+#include "i2c.h"
+
+/****************** I2C DEFINITION SECTION *************************/
+
+#define D(x)
+
+#define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
+static const char i2c_name[] = "i2c";
+
+#define CLOCK_LOW_TIME            8
+#define CLOCK_HIGH_TIME           8
+#define START_CONDITION_HOLD_TIME 8
+#define STOP_CONDITION_HOLD_TIME  8
+#define ENABLE_OUTPUT 0x01
+#define ENABLE_INPUT 0x00
+#define I2C_CLOCK_HIGH 1
+#define I2C_CLOCK_LOW 0
+#define I2C_DATA_HIGH 1
+#define I2C_DATA_LOW 0
+
+#ifdef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+/* Use PB and not PB_I2C */
+#ifndef CONFIG_ETRAX_I2C_DATA_PORT
+#define CONFIG_ETRAX_I2C_DATA_PORT 0
+#endif
+#ifndef CONFIG_ETRAX_I2C_CLK_PORT
+#define CONFIG_ETRAX_I2C_CLK_PORT 1
+#endif
+
+#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
+#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
+#define i2c_enable()
+#define i2c_disable()
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() \
+  REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 1)
+#define i2c_dir_in()  \
+  REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0)
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) \
+  REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x)
+#define i2c_data(x) \
+  REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SDABIT, x)
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() (((*R_PORT_PB_READ & (1 << SDABIT))) >> SDABIT)
+
+#else
+/* enable or disable the i2c interface */
+
+#define i2c_enable() *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_en))
+#define i2c_disable() *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_en))
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
+	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
+#define i2c_dir_in() \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
+	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \
+       ~IO_MASK(R_PORT_PB_I2C, i2c_clk)) | IO_FIELD(R_PORT_PB_I2C, i2c_clk, (x))); \
+       REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 1, x);
+
+#define i2c_data(x) \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \
+	   ~IO_MASK(R_PORT_PB_I2C, i2c_d)) | IO_FIELD(R_PORT_PB_I2C, i2c_d, (x))); \
+	REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 0, x);
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() (*R_PORT_PB_READ & 0x1)
+#endif
+
+/* use the kernels delay routine */
+
+#define i2c_delay(usecs) udelay(usecs)
+
+static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
+
+/****************** FUNCTION DEFINITION SECTION *************************/
+
+
+/* generate i2c start condition */
+
+void
+i2c_start(void)
+{
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_dir_out();
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_data(I2C_DATA_HIGH);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(START_CONDITION_HOLD_TIME);
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+}
+
+/* generate i2c stop condition */
+
+void
+i2c_stop(void)
+{
+	i2c_dir_out();
+
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME*2);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME*2);
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(STOP_CONDITION_HOLD_TIME);
+
+	i2c_dir_in();
+}
+
+/* write a byte to the i2c interface */
+
+void
+i2c_outbyte(unsigned char x)
+{
+	int i;
+
+	i2c_dir_out();
+
+	for (i = 0; i < 8; i++) {
+		if (x & 0x80) {
+			i2c_data(I2C_DATA_HIGH);
+		} else {
+			i2c_data(I2C_DATA_LOW);
+		}
+
+		i2c_delay(CLOCK_LOW_TIME/2);
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME/2);
+		x <<= 1;
+	}
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+}
+
+/* read a byte from the i2c interface */
+
+unsigned char
+i2c_inbyte(void)
+{
+	unsigned char aBitByte = 0;
+	int i;
+
+	/* Switch off I2C to get bit */
+	i2c_disable();
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/2);
+
+	/* Get bit */
+	aBitByte |= i2c_getbit();
+
+	/* Enable I2C */
+	i2c_enable();
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	for (i = 1; i < 8; i++) {
+		aBitByte <<= 1;
+		/* Clock pulse */
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME);
+
+		/* Switch off I2C to get bit */
+		i2c_disable();
+		i2c_dir_in();
+		i2c_delay(CLOCK_HIGH_TIME/2);
+
+		/* Get bit */
+		aBitByte |= i2c_getbit();
+
+		/* Enable I2C */
+		i2c_enable();
+		i2c_delay(CLOCK_LOW_TIME/2);
+	}
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+
+        /*
+	 * we leave the clock low, getbyte is usually followed
+	 * by sendack/nack, they assume the clock to be low
+	 */
+        i2c_clk(I2C_CLOCK_LOW);
+	return aBitByte;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_getack
+*#
+*# DESCRIPTION  : checks if ack was received from ic2
+*#
+*#--------------------------------------------------------------------------*/
+
+int
+i2c_getack(void)
+{
+	int ack = 1;
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * Release data bus by setting
+	 * data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * generate ACK clock pulse
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	/*
+	 * Use PORT PB instead of I2C
+	 * for input. (I2C not working)
+	 */
+	i2c_clk(1);
+	i2c_data(1);
+	/*
+	 * switch off I2C
+	 */
+	i2c_data(1);
+	i2c_disable();
+	i2c_dir_in();
+	/*
+	 * now wait for ack
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	/*
+	 * check for ack
+	 */
+	if(i2c_getbit())
+		ack = 0;
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	if(!ack){
+		if(!i2c_getbit()) /* receiver pulld SDA low */
+			ack = 1;
+		i2c_delay(CLOCK_HIGH_TIME/2);
+	}
+
+	/*
+	 * our clock is high now, make sure data is low
+	 * before we enable our output. If we keep data high
+	 * and enable output, we would generate a stop condition.
+	 */
+	i2c_data(I2C_DATA_LOW);
+
+	/*
+	 * end clock pulse
+	 */
+	i2c_enable();
+	i2c_dir_out();
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * remove ACK clock pulse
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME/2);
+	return ack;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: I2C::sendAck
+*#
+*# DESCRIPTION  : Send ACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set ack pulse high
+	 */
+	i2c_data(I2C_DATA_LOW);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME/6);
+	/*
+	 * reset data out
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_sendnack
+*#
+*# DESCRIPTION  : Sends NACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendnack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_writereg
+*#
+*# DESCRIPTION  : Writes a value to an I2C device
+*#
+*#--------------------------------------------------------------------------*/
+int
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
+	     unsigned char theValue)
+{
+	int error, cntr = 3;
+	unsigned long flags;
+
+	spin_lock(&i2c_lock);
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+		local_irq_save(flags);
+
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 2;
+		/*
+		 * send register register data
+		 */
+		i2c_outbyte(theValue);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 4;
+		/*
+		 * end byte stream
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+
+	} while(error && cntr--);
+
+	i2c_delay(CLOCK_LOW_TIME);
+
+	spin_unlock(&i2c_lock);
+
+	return -error;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_readreg
+*#
+*# DESCRIPTION  : Reads a value from the decoder registers.
+*#
+*#--------------------------------------------------------------------------*/
+unsigned char
+i2c_readreg(unsigned char theSlave, unsigned char theReg)
+{
+	unsigned char b = 0;
+	int error, cntr = 3;
+	unsigned long flags;
+
+	spin_lock(&i2c_lock);
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+		local_irq_save(flags);
+		/*
+		 * generate start condition
+		 */
+		i2c_start();
+
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * repeat start condition
+		 */
+		i2c_delay(CLOCK_LOW_TIME);
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte(theSlave | 0x01);
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * fetch register
+		 */
+		b = i2c_inbyte();
+		/*
+		 * last received byte needs to be nacked
+		 * instead of acked
+		 */
+		i2c_sendnack();
+		/*
+		 * end sequence
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+
+	} while(error && cntr--);
+
+	spin_unlock(&i2c_lock);
+
+	return b;
+}
+
+static int
+i2c_open(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+static int
+i2c_release(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+/* Main device API. ioctl's to write or read to/from i2c registers.
+ */
+
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+		return -EINVAL;
+	}
+
+	switch (_IOC_NR(cmd)) {
+		case I2C_WRITEREG:
+			/* write to an i2c slave */
+			D(printk(KERN_DEBUG "i2cw %d %d %d\n",
+				 I2C_ARGSLAVE(arg),
+				 I2C_ARGREG(arg),
+				 I2C_ARGVALUE(arg)));
+
+			return i2c_writereg(I2C_ARGSLAVE(arg),
+					    I2C_ARGREG(arg),
+					    I2C_ARGVALUE(arg));
+		case I2C_READREG:
+		{
+			unsigned char val;
+			/* read from an i2c slave */
+			D(printk(KERN_DEBUG "i2cr %d %d ",
+				I2C_ARGSLAVE(arg),
+				I2C_ARGREG(arg)));
+			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			D(printk(KERN_DEBUG "= %d\n", val));
+			return val;
+		}
+		default:
+			return -EINVAL;
+
+	}
+	return 0;
+}
+
+static const struct file_operations i2c_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
+	.llseek		= noop_llseek,
+};
+
+int __init
+i2c_init(void)
+{
+	static int res = 0;
+	static int first = 1;
+
+	if (!first) {
+		return res;
+	}
+	first = 0;
+
+	/* Setup and enable the Port B I2C interface */
+
+#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+	if ((res = cris_request_io_interface(if_i2c, "I2C"))) {
+		printk(KERN_CRIT "i2c_init: Failed to get IO interface\n");
+		return res;
+	}
+
+	*R_PORT_PB_I2C = port_pb_i2c_shadow |= 
+		IO_STATE(R_PORT_PB_I2C, i2c_en,  on) |
+		IO_FIELD(R_PORT_PB_I2C, i2c_d,   1)  |
+		IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1)  |
+		IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
+
+	port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
+	port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
+
+	*R_PORT_PB_DIR = (port_pb_dir_shadow |=
+			  IO_STATE(R_PORT_PB_DIR, dir0, input)  |
+			  IO_STATE(R_PORT_PB_DIR, dir1, output));
+#else
+        if ((res = cris_io_interface_allocate_pins(if_i2c,
+						   'b',
+                                                   CONFIG_ETRAX_I2C_DATA_PORT,
+						   CONFIG_ETRAX_I2C_DATA_PORT))) {
+		printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n");
+		return res;
+	} else if ((res = cris_io_interface_allocate_pins(if_i2c,
+							  'b',
+							  CONFIG_ETRAX_I2C_CLK_PORT,
+							  CONFIG_ETRAX_I2C_CLK_PORT))) {
+		cris_io_interface_free_pins(if_i2c,
+					    'b',
+					    CONFIG_ETRAX_I2C_DATA_PORT,
+					    CONFIG_ETRAX_I2C_DATA_PORT);
+		printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n");
+	}
+#endif
+
+	return res;
+}
+
+static int __init
+i2c_register(void)
+{
+	int res;
+
+	res = i2c_init();
+	if (res < 0)
+		return res;
+  	res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
+	if(res < 0) {
+		printk(KERN_ERR "i2c: couldn't get a major number.\n");
+		return res;
+	}
+
+	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
+	
+	return 0;
+}
+
+/* this makes sure that i2c_register is called during boot */
+
+module_init(i2c_register);
+
+/****************** END OF FILE i2c.c ********************************/
diff --git a/arch/cris/arch-v10/drivers/i2c.h b/arch/cris/arch-v10/drivers/i2c.h
new file mode 100644
index 000000000..e36c96276
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/i2c.h
@@ -0,0 +1,17 @@
+/* i2c.h */
+int i2c_init(void);
+
+/* High level I2C actions */
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+void i2c_start(void);
+void i2c_stop(void);
+void i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);
+
+
+
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
new file mode 100644
index 000000000..0f3983241
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -0,0 +1,1462 @@
+/*
+ * Simple synchronous serial port driver for ETRAX 100LX.
+ *
+ * Synchronous serial ports are used for continuous streamed data like audio.
+ * The default setting for this driver is compatible with the STA 013 MP3
+ * decoder. The driver can easily be tuned to fit other audio encoder/decoders
+ * and SPI
+ *
+ * Copyright (c) 2001-2008 Axis Communications AB
+ *
+ * Author: Mikael Starvik, Johan Adolfsson
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <arch/svinto.h>
+#include <asm/uaccess.h>
+#include <asm/sync_serial.h>
+#include <arch/io_interface_mux.h>
+
+/* The receiver is a bit tricky because of the continuous stream of data.*/
+/*                                                                       */
+/* Three DMA descriptors are linked together. Each DMA descriptor is     */
+/* responsible for port->bufchunk of a common buffer.                    */
+/*                                                                       */
+/* +---------------------------------------------+                       */
+/* |   +----------+   +----------+   +----------+ |                      */
+/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+                      */
+/*     +----------+   +----------+   +----------+                        */
+/*         |            |              |                                 */
+/*         v            v              v                                 */
+/*   +-------------------------------------+                             */
+/*   |        BUFFER                       |                             */
+/*   +-------------------------------------+                             */
+/*      |<- data_avail ->|                                               */
+/*    readp          writep                                              */
+/*                                                                       */
+/* If the application keeps up the pace readp will be right after writep.*/
+/* If the application can't keep the pace we have to throw away data.    */
+/* The idea is that readp should be ready with the data pointed out by	 */
+/* Descr[i] when the DMA has filled in Descr[i+1].                       */
+/* Otherwise we will discard	                                         */
+/* the rest of the data pointed out by Descr1 and set readp to the start */
+/* of Descr2                                                             */
+
+#define SYNC_SERIAL_MAJOR 125
+
+/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */
+/* words can be handled */
+#define IN_BUFFER_SIZE 12288
+#define IN_DESCR_SIZE 256
+#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
+#define OUT_BUFFER_SIZE 4096
+
+#define DEFAULT_FRAME_RATE 0
+#define DEFAULT_WORD_RATE 7
+
+/* NOTE: Enabling some debug will likely cause overrun or underrun,
+ * especially if manual mode is use.
+ */
+#define DEBUG(x)
+#define DEBUGREAD(x)
+#define DEBUGWRITE(x)
+#define DEBUGPOLL(x)
+#define DEBUGRXINT(x)
+#define DEBUGTXINT(x)
+
+/* Define some macros to access ETRAX 100 registers */
+#define SETF(var, reg, field, val) \
+	do { \
+		var = (var & ~IO_MASK_(reg##_, field##_)) | \
+			IO_FIELD_(reg##_, field##_, val); \
+	} while (0)
+
+#define SETS(var, reg, field, val) \
+	do { \
+		var = (var & ~IO_MASK_(reg##_, field##_)) | \
+			IO_STATE_(reg##_, field##_, _##val); \
+	} while (0)
+
+struct sync_port {
+	/* Etrax registers and bits*/
+	const volatile unsigned *const status;
+	volatile unsigned *const ctrl_data;
+	volatile unsigned *const output_dma_first;
+	volatile unsigned char *const output_dma_cmd;
+	volatile unsigned char *const output_dma_clr_irq;
+	volatile unsigned *const input_dma_first;
+	volatile unsigned char *const input_dma_cmd;
+	volatile unsigned *const input_dma_descr;
+	/* 8*4 */
+	volatile unsigned char *const input_dma_clr_irq;
+	volatile unsigned *const data_out;
+	const volatile unsigned *const data_in;
+	char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
+	char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
+	char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */
+
+	char output_dma_bit; /* In R_IRQ_MASK2_RD */
+	/* End of fields initialised in array */
+	char started; /* 1 if port has been started */
+	char port_nbr; /* Port 0 or 1 */
+	char busy; /* 1 if port is busy */
+
+	char enabled;  /* 1 if port is enabled */
+	char use_dma;  /* 1 if port uses dma */
+	char tr_running;
+
+	char init_irqs;
+
+	/* Register shadow */
+	unsigned int ctrl_data_shadow;
+	/* Remaining bytes for current transfer */
+	volatile unsigned int out_count;
+	/* Current position in out_buffer */
+	unsigned char *outp;
+	/* 16*4 */
+	/* Next byte to be read by application */
+	volatile unsigned char *volatile readp;
+	/* Next byte to be written by etrax */
+	volatile unsigned char *volatile writep;
+
+	unsigned int in_buffer_size;
+	unsigned int inbufchunk;
+	struct etrax_dma_descr out_descr __attribute__ ((aligned(32)));
+	struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32)));
+	unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32)));
+	unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32)));
+	unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32)));
+	struct etrax_dma_descr *next_rx_desc;
+	struct etrax_dma_descr *prev_rx_desc;
+	int full;
+
+	wait_queue_head_t out_wait_q;
+	wait_queue_head_t in_wait_q;
+};
+
+
+static DEFINE_MUTEX(sync_serial_mutex);
+static int etrax_sync_serial_init(void);
+static void initialize_port(int portnbr);
+static inline int sync_data_avail(struct sync_port *port);
+
+static int sync_serial_open(struct inode *inode, struct file *file);
+static int sync_serial_release(struct inode *inode, struct file *file);
+static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
+
+static long sync_serial_ioctl(struct file *file,
+	unsigned int cmd, unsigned long arg);
+static ssize_t sync_serial_write(struct file *file, const char *buf,
+	size_t count, loff_t *ppos);
+static ssize_t sync_serial_read(struct file *file, char *buf,
+	size_t count, loff_t *ppos);
+
+#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
+     defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
+    (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
+     defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)))
+#define SYNC_SER_DMA
+#endif
+
+static void send_word(struct sync_port *port);
+static void start_dma(struct sync_port *port, const char *data, int count);
+static void start_dma_in(struct sync_port *port);
+#ifdef SYNC_SER_DMA
+static irqreturn_t tr_interrupt(int irq, void *dev_id);
+static irqreturn_t rx_interrupt(int irq, void *dev_id);
+#endif
+#if ((defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
+     !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
+    (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
+     !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)))
+#define SYNC_SER_MANUAL
+#endif
+#ifdef SYNC_SER_MANUAL
+static irqreturn_t manual_interrupt(int irq, void *dev_id);
+#endif
+
+/* The ports */
+static struct sync_port ports[] = {
+	{
+		.status                = R_SYNC_SERIAL1_STATUS,
+		.ctrl_data             = R_SYNC_SERIAL1_CTRL,
+		.output_dma_first      = R_DMA_CH8_FIRST,
+		.output_dma_cmd        = R_DMA_CH8_CMD,
+		.output_dma_clr_irq    = R_DMA_CH8_CLR_INTR,
+		.input_dma_first       = R_DMA_CH9_FIRST,
+		.input_dma_cmd         = R_DMA_CH9_CMD,
+		.input_dma_descr       = R_DMA_CH9_DESCR,
+		.input_dma_clr_irq     = R_DMA_CH9_CLR_INTR,
+		.data_out              = R_SYNC_SERIAL1_TR_DATA,
+		.data_in               = R_SYNC_SERIAL1_REC_DATA,
+		.data_avail_bit        = IO_BITNR(R_IRQ_MASK1_RD, ser1_data),
+		.transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready),
+		.input_dma_descr_bit   = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr),
+		.output_dma_bit        = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop),
+		.init_irqs             = 1,
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
+		.use_dma               = 1,
+#else
+		.use_dma               = 0,
+#endif
+	},
+	{
+		.status                = R_SYNC_SERIAL3_STATUS,
+		.ctrl_data             = R_SYNC_SERIAL3_CTRL,
+		.output_dma_first      = R_DMA_CH4_FIRST,
+		.output_dma_cmd        = R_DMA_CH4_CMD,
+		.output_dma_clr_irq    = R_DMA_CH4_CLR_INTR,
+		.input_dma_first       = R_DMA_CH5_FIRST,
+		.input_dma_cmd         = R_DMA_CH5_CMD,
+		.input_dma_descr       = R_DMA_CH5_DESCR,
+		.input_dma_clr_irq     = R_DMA_CH5_CLR_INTR,
+		.data_out              = R_SYNC_SERIAL3_TR_DATA,
+		.data_in               = R_SYNC_SERIAL3_REC_DATA,
+		.data_avail_bit        = IO_BITNR(R_IRQ_MASK1_RD, ser3_data),
+		.transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready),
+		.input_dma_descr_bit   = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr),
+		.output_dma_bit        = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop),
+		.init_irqs             = 1,
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
+		.use_dma               = 1,
+#else
+		.use_dma               = 0,
+#endif
+	}
+};
+
+/* Register shadows */
+static unsigned sync_serial_prescale_shadow;
+
+#define NUMBER_OF_PORTS 2
+
+static const struct file_operations sync_serial_fops = {
+	.owner		= THIS_MODULE,
+	.write		= sync_serial_write,
+	.read		= sync_serial_read,
+	.poll		= sync_serial_poll,
+	.unlocked_ioctl	= sync_serial_ioctl,
+	.open		= sync_serial_open,
+	.release	= sync_serial_release,
+	.llseek		= noop_llseek,
+};
+
+static int __init etrax_sync_serial_init(void)
+{
+	ports[0].enabled = 0;
+	ports[1].enabled = 0;
+
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+	if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) {
+		printk(KERN_CRIT "ETRAX100LX sync_serial: "
+			"Could not allocate IO group for port %d\n", 0);
+		return -EBUSY;
+	}
+#endif
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+	if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) {
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+		cris_free_io_interface(if_sync_serial_1);
+#endif
+		printk(KERN_CRIT "ETRAX100LX sync_serial: "
+			"Could not allocate IO group for port %d\n", 1);
+		return -EBUSY;
+	}
+#endif
+
+	if (register_chrdev(SYNC_SERIAL_MAJOR, "sync serial",
+			&sync_serial_fops) < 0) {
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+		cris_free_io_interface(if_sync_serial_3);
+#endif
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+		cris_free_io_interface(if_sync_serial_1);
+#endif
+		printk("unable to get major for synchronous serial port\n");
+		return -EBUSY;
+	}
+
+	/* Deselect synchronous serial ports while configuring. */
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+
+	/* Initialize Ports */
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+	ports[0].enabled = 1;
+	SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra);
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
+	ports[0].use_dma = 1;
+#else
+	ports[0].use_dma = 0;
+#endif
+	initialize_port(0);
+#endif
+
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+	ports[1].enabled = 1;
+	SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra);
+	SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
+	ports[1].use_dma = 1;
+#else
+	ports[1].use_dma = 0;
+#endif
+	initialize_port(1);
+#endif
+
+	*R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */
+
+	/* Set up timing */
+	*R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = (
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) |
+		IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate,
+			DEFAULT_FRAME_RATE) |
+		IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) |
+		IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal));
+
+	/* Select synchronous ports */
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+
+	printk(KERN_INFO "ETRAX 100LX synchronous serial port driver\n");
+	return 0;
+}
+
+static void __init initialize_port(int portnbr)
+{
+	struct sync_port *port = &ports[portnbr];
+
+	DEBUG(printk(KERN_DEBUG "Init sync serial port %d\n", portnbr));
+
+	port->started = 0;
+	port->port_nbr = portnbr;
+	port->busy = 0;
+	port->tr_running = 0;
+
+	port->out_count = 0;
+	port->outp = port->out_buffer;
+
+	port->readp = port->flip;
+	port->writep = port->flip;
+	port->in_buffer_size = IN_BUFFER_SIZE;
+	port->inbufchunk = IN_DESCR_SIZE;
+	port->next_rx_desc = &port->in_descr[0];
+	port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1];
+	port->prev_rx_desc->ctrl = d_eol;
+
+	init_waitqueue_head(&port->out_wait_q);
+	init_waitqueue_head(&port->in_wait_q);
+
+	port->ctrl_data_shadow =
+		IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore)       |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word)    |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on)	     |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal)    |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb)	     |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8)    |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8)     |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled)  |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)|
+		IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)|
+		IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal)   |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) |
+		IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)|
+		IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high);
+
+	if (port->use_dma)
+		port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL,
+			dma_enable, on);
+	else
+		port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL,
+			dma_enable, off);
+
+	*port->ctrl_data = port->ctrl_data_shadow;
+}
+
+static inline int sync_data_avail(struct sync_port *port)
+{
+	int avail;
+	unsigned char *start;
+	unsigned char *end;
+
+	start = (unsigned char *)port->readp; /* cast away volatile */
+	end = (unsigned char *)port->writep;  /* cast away volatile */
+	/* 0123456789  0123456789
+	 *  -----      -    -----
+	 *  ^rp  ^wp    ^wp ^rp
+	 */
+	if (end >= start)
+		avail = end - start;
+	else
+		avail = port->in_buffer_size - (start - end);
+	return avail;
+}
+
+static inline int sync_data_avail_to_end(struct sync_port *port)
+{
+	int avail;
+	unsigned char *start;
+	unsigned char *end;
+
+	start = (unsigned char *)port->readp; /* cast away volatile */
+	end = (unsigned char *)port->writep;  /* cast away volatile */
+	/* 0123456789  0123456789
+	 *  -----           -----
+	 *  ^rp  ^wp    ^wp ^rp
+	 */
+
+	if (end >= start)
+		avail = end - start;
+	else
+		avail = port->flip + port->in_buffer_size - start;
+	return avail;
+}
+
+
+static int sync_serial_open(struct inode *inode, struct file *file)
+{
+	int dev = MINOR(inode->i_rdev);
+	struct sync_port *port;
+	int mode;
+	int err = -EBUSY;
+
+	mutex_lock(&sync_serial_mutex);
+	DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		err = -ENODEV;
+		goto out;
+	}
+	port = &ports[dev];
+	/* Allow open this device twice (assuming one reader and one writer) */
+	if (port->busy == 2) {
+		DEBUG(printk(KERN_DEBUG "Device is busy.. \n"));
+		goto out;
+	}
+	if (port->init_irqs) {
+		if (port->use_dma) {
+			if (port == &ports[0]) {
+#ifdef SYNC_SER_DMA
+				if (request_irq(24, tr_interrupt, 0,
+						"synchronous serial 1 dma tr",
+						&ports[0])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 IRQ");
+					goto out;
+				} else if (request_irq(25, rx_interrupt, 0,
+						"synchronous serial 1 dma rx",
+						&ports[0])) {
+					free_irq(24, &port[0]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 IRQ");
+					goto out;
+				} else if (cris_request_dma(8,
+						"synchronous serial 1 dma tr",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser1)) {
+					free_irq(24, &port[0]);
+					free_irq(25, &port[0]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 "
+						"TX DMA channel");
+					goto out;
+				} else if (cris_request_dma(9,
+						"synchronous serial 1 dma rec",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser1)) {
+					cris_free_dma(8, NULL);
+					free_irq(24, &port[0]);
+					free_irq(25, &port[0]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 1 "
+						"RX DMA channel");
+					goto out;
+				}
+#endif
+				RESET_DMA(8); WAIT_DMA(8);
+				RESET_DMA(9); WAIT_DMA(9);
+				*R_DMA_CH8_CLR_INTR =
+					IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr,
+						do);
+				*R_DMA_CH9_CLR_INTR =
+					IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr,
+						do);
+				*R_IRQ_MASK2_SET =
+					IO_STATE(R_IRQ_MASK2_SET, dma8_eop,
+						set) |
+					IO_STATE(R_IRQ_MASK2_SET, dma9_descr,
+						set);
+			} else if (port == &ports[1]) {
+#ifdef SYNC_SER_DMA
+				if (request_irq(20, tr_interrupt, 0,
+						"synchronous serial 3 dma tr",
+						&ports[1])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 IRQ");
+					goto out;
+				} else if (request_irq(21, rx_interrupt, 0,
+						"synchronous serial 3 dma rx",
+						&ports[1])) {
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 IRQ");
+					goto out;
+				} else if (cris_request_dma(4,
+						"synchronous serial 3 dma tr",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser3)) {
+					free_irq(21, &ports[1]);
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 "
+						"TX DMA channel");
+					goto out;
+				} else if (cris_request_dma(5,
+						"synchronous serial 3 dma rec",
+						DMA_VERBOSE_ON_ERROR,
+						dma_ser3)) {
+					cris_free_dma(4, NULL);
+					free_irq(21, &ports[1]);
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial port 3 "
+						"RX DMA channel");
+					goto out;
+				}
+#endif
+				RESET_DMA(4); WAIT_DMA(4);
+				RESET_DMA(5); WAIT_DMA(5);
+				*R_DMA_CH4_CLR_INTR =
+					IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr,
+						do);
+				*R_DMA_CH5_CLR_INTR =
+					IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop,
+						do) |
+					IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr,
+						do);
+				*R_IRQ_MASK2_SET =
+					IO_STATE(R_IRQ_MASK2_SET, dma4_eop,
+						set) |
+					IO_STATE(R_IRQ_MASK2_SET, dma5_descr,
+						set);
+			}
+			start_dma_in(port);
+			port->init_irqs = 0;
+		} else { /* !port->use_dma */
+#ifdef SYNC_SER_MANUAL
+			if (port == &ports[0]) {
+				if (request_irq(8,
+						manual_interrupt,
+						IRQF_SHARED,
+						"synchronous serial manual irq",
+						&ports[0])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial manual irq");
+					goto out;
+				}
+			} else if (port == &ports[1]) {
+				if (request_irq(8,
+						manual_interrupt,
+						IRQF_SHARED,
+						"synchronous serial manual irq",
+						&ports[1])) {
+					printk(KERN_CRIT "Can't alloc "
+						"sync serial manual irq");
+					goto out;
+				}
+			}
+			port->init_irqs = 0;
+#else
+			panic("sync_serial: Manual mode not supported.\n");
+#endif /* SYNC_SER_MANUAL */
+		}
+	} /* port->init_irqs */
+
+	port->busy++;
+	/* Start port if we use it as input */
+	mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow);
+	if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) ||
+	    mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) ||
+	    mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) ||
+	    mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) {
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
+			running);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
+			enable);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
+			enable);
+		port->started = 1;
+		*port->ctrl_data = port->ctrl_data_shadow;
+		if (!port->use_dma)
+			*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
+		DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev));
+	}
+	err = 0;
+	
+out:
+	mutex_unlock(&sync_serial_mutex);
+	return err;
+}
+
+static int sync_serial_release(struct inode *inode, struct file *file)
+{
+	int dev = MINOR(inode->i_rdev);
+	struct sync_port *port;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+	if (port->busy)
+		port->busy--;
+	if (!port->busy)
+		*R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) |
+				    (1 << port->transmitter_ready_bit));
+
+	return 0;
+}
+
+
+
+static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
+{
+	int dev = MINOR(file_inode(file)->i_rdev);
+	unsigned int mask = 0;
+	struct sync_port *port;
+	DEBUGPOLL(static unsigned int prev_mask = 0);
+
+	port = &ports[dev];
+	poll_wait(file, &port->out_wait_q, wait);
+	poll_wait(file, &port->in_wait_q, wait);
+	/* Some room to write */
+	if (port->out_count < OUT_BUFFER_SIZE)
+		mask |=  POLLOUT | POLLWRNORM;
+	/* At least an inbufchunk of data */
+	if (sync_data_avail(port) >= port->inbufchunk)
+		mask |= POLLIN | POLLRDNORM;
+
+	DEBUGPOLL(if (mask != prev_mask)
+		printk(KERN_DEBUG "sync_serial_poll: mask 0x%08X %s %s\n",
+			mask,
+			mask & POLLOUT ? "POLLOUT" : "",
+			mask & POLLIN ? "POLLIN" : "");
+		prev_mask = mask;
+	);
+	return mask;
+}
+
+static int sync_serial_ioctl_unlocked(struct file *file,
+		  unsigned int cmd, unsigned long arg)
+{
+	int return_val = 0;
+	unsigned long flags;
+
+	int dev = MINOR(file_inode(file)->i_rdev);
+	struct sync_port *port;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -1;
+	}
+	port = &ports[dev];
+
+	local_irq_save(flags);
+	/* Disable port while changing config */
+	if (dev) {
+		if (port->use_dma) {
+			RESET_DMA(4); WAIT_DMA(4);
+			port->tr_running = 0;
+			port->out_count = 0;
+			port->outp = port->out_buffer;
+			*R_DMA_CH4_CLR_INTR =
+				IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) |
+				IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do);
+		}
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
+	} else {
+		if (port->use_dma) {
+			RESET_DMA(8); WAIT_DMA(8);
+			port->tr_running = 0;
+			port->out_count = 0;
+			port->outp = port->out_buffer;
+			*R_DMA_CH8_CLR_INTR =
+				IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) |
+				IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do);
+		}
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
+	}
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+	local_irq_restore(flags);
+
+	switch (cmd) {
+	case SSP_SPEED:
+		if (GET_SPEED(arg) == CODEC) {
+			if (dev)
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u3,
+					codec);
+			else
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u1,
+					codec);
+
+			SETF(sync_serial_prescale_shadow,
+				R_SYNC_SERIAL_PRESCALE, prescaler,
+				GET_FREQ(arg));
+			SETF(sync_serial_prescale_shadow,
+				R_SYNC_SERIAL_PRESCALE, frame_rate,
+				GET_FRAME_RATE(arg));
+			SETF(sync_serial_prescale_shadow,
+				R_SYNC_SERIAL_PRESCALE, word_rate,
+				GET_WORD_RATE(arg));
+		} else {
+			SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				tr_baud, GET_SPEED(arg));
+			if (dev)
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u3,
+					baudrate);
+			else
+				SETS(sync_serial_prescale_shadow,
+					R_SYNC_SERIAL_PRESCALE, clk_sel_u1,
+					baudrate);
+		}
+		break;
+	case SSP_MODE:
+		if (arg > 5)
+			return -EINVAL;
+		if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)
+			*R_IRQ_MASK1_CLR = 1 << port->data_avail_bit;
+		else if (!port->use_dma)
+			*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
+		SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg);
+		break;
+	case SSP_FRAME_SYNC:
+		if (arg & NORMAL_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_synctype, normal);
+		else if (arg & EARLY_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_synctype, early);
+
+		if (arg & BIT_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_syncsize, bit);
+		else if (arg & WORD_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_syncsize, word);
+		else if (arg & EXTENDED_SYNC)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_syncsize, extended);
+
+		if (arg & SYNC_ON)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_sync, on);
+		else if (arg & SYNC_OFF)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				f_sync, off);
+
+		if (arg & WORD_SIZE_8)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size8bit);
+		else if (arg & WORD_SIZE_12)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size12bit);
+		else if (arg & WORD_SIZE_16)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size16bit);
+		else if (arg & WORD_SIZE_24)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size24bit);
+		else if (arg & WORD_SIZE_32)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				wordsize, size32bit);
+
+		if (arg & BIT_ORDER_MSB)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				bitorder, msb);
+		else if (arg & BIT_ORDER_LSB)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				bitorder, lsb);
+
+		if (arg & FLOW_CONTROL_ENABLE)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				flow_ctrl, enabled);
+		else if (arg & FLOW_CONTROL_DISABLE)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				flow_ctrl, disabled);
+
+		if (arg & CLOCK_NOT_GATED)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_mode, normal);
+		else if (arg & CLOCK_GATED)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_mode, gated);
+
+		break;
+	case SSP_IPOLARITY:
+		/* NOTE!! negedge is considered NORMAL */
+		if (arg & CLOCK_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_polarity, neg);
+		else if (arg & CLOCK_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_polarity, pos);
+
+		if (arg & FRAME_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_polarity, normal);
+		else if (arg & FRAME_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_polarity, inverted);
+
+		if (arg & STATUS_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_polarity, normal);
+		else if (arg & STATUS_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_polarity, inverted);
+		break;
+	case SSP_OPOLARITY:
+		if (arg & CLOCK_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_driver, normal);
+		else if (arg & CLOCK_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_driver, inverted);
+
+		if (arg & FRAME_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_driver, normal);
+		else if (arg & FRAME_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_driver, inverted);
+
+		if (arg & STATUS_NORMAL)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_driver, normal);
+		else if (arg & STATUS_INVERT)
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				status_driver, inverted);
+		break;
+	case SSP_SPI:
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl,
+			disabled);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder,
+			msb);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize,
+			size8bit);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize,
+			word);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype,
+			normal);
+		if (arg & SPI_SLAVE) {
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_polarity, inverted);
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_polarity, neg);
+			SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				mode, SLAVE_INPUT);
+		} else {
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				frame_driver, inverted);
+			SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				clk_driver, inverted);
+			SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL,
+				mode, MASTER_OUTPUT);
+		}
+		break;
+	case SSP_INBUFCHUNK:
+#if 0
+		if (arg > port->in_buffer_size/NUM_IN_DESCR)
+			return -EINVAL;
+		port->inbufchunk = arg;
+		/* Make sure in_buffer_size is a multiple of inbufchunk */
+		port->in_buffer_size =
+			(port->in_buffer_size/port->inbufchunk) *
+			port->inbufchunk;
+		DEBUG(printk(KERN_DEBUG "inbufchunk %i in_buffer_size: %i\n",
+			port->inbufchunk, port->in_buffer_size));
+		if (port->use_dma) {
+			if (port->port_nbr == 0) {
+				RESET_DMA(9);
+				WAIT_DMA(9);
+			} else {
+				RESET_DMA(5);
+				WAIT_DMA(5);
+			}
+			start_dma_in(port);
+		}
+#endif
+		break;
+	default:
+		return_val = -1;
+	}
+	/* Make sure we write the config without interruption */
+	local_irq_save(flags);
+	/* Set config and enable port */
+	*port->ctrl_data = port->ctrl_data_shadow;
+	nop(); nop(); nop(); nop();
+	*R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow;
+	nop(); nop(); nop(); nop();
+	if (dev)
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
+	else
+		SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
+
+	*R_GEN_CONFIG_II = gen_config_ii_shadow;
+	/* Reset DMA. At readout from serial port the data could be shifted
+	 * one byte if not resetting DMA.
+	 */
+	if (port->use_dma) {
+		if (port->port_nbr == 0) {
+			RESET_DMA(9);
+			WAIT_DMA(9);
+		} else {
+			RESET_DMA(5);
+			WAIT_DMA(5);
+		}
+		start_dma_in(port);
+	}
+	local_irq_restore(flags);
+	return return_val;
+}
+
+static long sync_serial_ioctl(struct file *file,
+			      unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	mutex_lock(&sync_serial_mutex);
+	ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+	mutex_unlock(&sync_serial_mutex);
+
+	return ret;
+}
+
+
+static ssize_t sync_serial_write(struct file *file, const char *buf,
+	size_t count, loff_t *ppos)
+{
+	int dev = MINOR(file_inode(file)->i_rdev);
+	DECLARE_WAITQUEUE(wait, current);
+	struct sync_port *port;
+	unsigned long flags;
+	unsigned long c, c1;
+	unsigned long free_outp;
+	unsigned long outp;
+	unsigned long out_buffer;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+
+	DEBUGWRITE(printk(KERN_DEBUG "W d%d c %lu (%d/%d)\n",
+		port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
+	/* Space to end of buffer */
+	/*
+	 * out_buffer <c1>012345<-   c    ->OUT_BUFFER_SIZE
+	 *            outp^    +out_count
+	 *                      ^free_outp
+	 * out_buffer 45<-     c      ->0123OUT_BUFFER_SIZE
+	 *             +out_count   outp^
+	 *              free_outp
+	 *
+	 */
+
+	/* Read variables that may be updated by interrupts */
+	local_irq_save(flags);
+	if (count > OUT_BUFFER_SIZE - port->out_count)
+		count = OUT_BUFFER_SIZE - port->out_count;
+
+	outp = (unsigned long)port->outp;
+	free_outp = outp + port->out_count;
+	local_irq_restore(flags);
+	out_buffer = (unsigned long)port->out_buffer;
+
+	/* Find out where and how much to write */
+	if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
+		free_outp -= OUT_BUFFER_SIZE;
+	if (free_outp >= outp)
+		c = out_buffer + OUT_BUFFER_SIZE - free_outp;
+	else
+		c = outp - free_outp;
+	if (c > count)
+		c = count;
+
+	DEBUGWRITE(printk(KERN_DEBUG "w op %08lX fop %08lX c %lu\n",
+		outp, free_outp, c));
+	if (copy_from_user((void *)free_outp, buf, c))
+		return -EFAULT;
+
+	if (c != count) {
+		buf += c;
+		c1 = count - c;
+		DEBUGWRITE(printk(KERN_DEBUG "w2 fi %lu c %lu c1 %lu\n",
+			free_outp-out_buffer, c, c1));
+		if (copy_from_user((void *)out_buffer, buf, c1))
+			return -EFAULT;
+	}
+	local_irq_save(flags);
+	port->out_count += count;
+	local_irq_restore(flags);
+
+	/* Make sure transmitter/receiver is running */
+	if (!port->started) {
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
+			running);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
+			enable);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
+			enable);
+		port->started = 1;
+	}
+
+	*port->ctrl_data = port->ctrl_data_shadow;
+
+	if (file->f_flags & O_NONBLOCK)	{
+		local_irq_save(flags);
+		if (!port->tr_running) {
+			if (!port->use_dma) {
+				/* Start sender by writing data */
+				send_word(port);
+				/* and enable transmitter ready IRQ */
+				*R_IRQ_MASK1_SET = 1 <<
+					port->transmitter_ready_bit;
+			} else
+				start_dma(port,
+					(unsigned char *volatile)port->outp, c);
+		}
+		local_irq_restore(flags);
+		DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu NB\n",
+			port->port_nbr, count));
+		return count;
+	}
+
+	/* Sleep until all sent */
+	add_wait_queue(&port->out_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	local_irq_save(flags);
+	if (!port->tr_running) {
+		if (!port->use_dma) {
+			/* Start sender by writing data */
+			send_word(port);
+			/* and enable transmitter ready IRQ */
+			*R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit;
+		} else
+			start_dma(port, port->outp, c);
+	}
+	local_irq_restore(flags);
+	schedule();
+	remove_wait_queue(&port->out_wait_q, &wait);
+	if (signal_pending(current))
+		return -EINTR;
+
+	DEBUGWRITE(printk(KERN_DEBUG "w d%d c %lu\n", port->port_nbr, count));
+	return count;
+}
+
+static ssize_t sync_serial_read(struct file *file, char *buf,
+				size_t count, loff_t *ppos)
+{
+	int dev = MINOR(file_inode(file)->i_rdev);
+	int avail;
+	struct sync_port *port;
+	unsigned char *start;
+	unsigned char *end;
+	unsigned long flags;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
+		DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+
+	DEBUGREAD(printk(KERN_DEBUG "R%d c %d ri %lu wi %lu /%lu\n",
+		dev, count, port->readp - port->flip,
+		port->writep - port->flip, port->in_buffer_size));
+
+	if (!port->started) {
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt,
+			running);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable,
+			enable);
+		SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable,
+			enable);
+		port->started = 1;
+	}
+	*port->ctrl_data = port->ctrl_data_shadow;
+
+	/* Calculate number of available bytes */
+	/* Save pointers to avoid that they are modified by interrupt */
+	local_irq_save(flags);
+	start = (unsigned char *)port->readp; /* cast away volatile */
+	end = (unsigned char *)port->writep;  /* cast away volatile */
+	local_irq_restore(flags);
+	while (start == end && !port->full) {
+		/* No data */
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		wait_event_interruptible(port->in_wait_q,
+					 !(start == end && !port->full));
+		if (signal_pending(current))
+			return -EINTR;
+
+		local_irq_save(flags);
+		start = (unsigned char *)port->readp; /* cast away volatile */
+		end = (unsigned char *)port->writep;  /* cast away volatile */
+		local_irq_restore(flags);
+	}
+
+	/* Lazy read, never return wrapped data. */
+	if (port->full)
+		avail = port->in_buffer_size;
+	else if (end > start)
+		avail = end - start;
+	else
+		avail = port->flip + port->in_buffer_size - start;
+
+	count = count > avail ? avail : count;
+	if (copy_to_user(buf, start, count))
+		return -EFAULT;
+	/* Disable interrupts while updating readp */
+	local_irq_save(flags);
+	port->readp += count;
+	if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
+		port->readp = port->flip;
+	port->full = 0;
+	local_irq_restore(flags);
+	DEBUGREAD(printk(KERN_DEBUG "r %d\n", count));
+	return count;
+}
+
+static void send_word(struct sync_port *port)
+{
+	switch (IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize,
+			port->ctrl_data_shadow)) {
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
+		 port->out_count--;
+		 *port->data_out = *port->outp++;
+		 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			 port->outp = port->out_buffer;
+		 break;
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
+	{
+		int data = (*port->outp++) << 8;
+		data |= *port->outp++;
+		port->out_count -= 2;
+		*port->data_out = data;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	}
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
+		port->out_count -= 2;
+		*port->data_out = *(unsigned short *)port->outp;
+		port->outp += 2;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
+		port->out_count -= 3;
+		*port->data_out = *(unsigned int *)port->outp;
+		port->outp += 3;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
+		port->out_count -= 4;
+		*port->data_out = *(unsigned int *)port->outp;
+		port->outp += 4;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	}
+}
+
+
+static void start_dma(struct sync_port *port, const char *data, int count)
+{
+	port->tr_running = 1;
+	port->out_descr.hw_len = 0;
+	port->out_descr.next = 0;
+	port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */
+	port->out_descr.sw_len = count;
+	port->out_descr.buf = virt_to_phys(data);
+	port->out_descr.status = 0;
+
+	*port->output_dma_first = virt_to_phys(&port->out_descr);
+	*port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
+	DEBUGTXINT(printk(KERN_DEBUG "dma %08lX c %d\n",
+		(unsigned long)data, count));
+}
+
+static void start_dma_in(struct sync_port *port)
+{
+	int i;
+	unsigned long buf;
+	port->writep = port->flip;
+
+	if (port->writep > port->flip + port->in_buffer_size) {
+		panic("Offset too large in sync serial driver\n");
+		return;
+	}
+	buf = virt_to_phys(port->in_buffer);
+	for (i = 0; i < NUM_IN_DESCR; i++) {
+		port->in_descr[i].sw_len = port->inbufchunk;
+		port->in_descr[i].ctrl = d_int;
+		port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]);
+		port->in_descr[i].buf = buf;
+		port->in_descr[i].hw_len = 0;
+		port->in_descr[i].status = 0;
+		port->in_descr[i].fifo_len = 0;
+		buf += port->inbufchunk;
+		prepare_rx_descriptor(&port->in_descr[i]);
+	}
+	/* Link the last descriptor to the first */
+	port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]);
+	port->in_descr[i-1].ctrl |= d_eol;
+	port->next_rx_desc = &port->in_descr[0];
+	port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1];
+	*port->input_dma_first = virt_to_phys(port->next_rx_desc);
+	*port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
+}
+
+#ifdef SYNC_SER_DMA
+static irqreturn_t tr_interrupt(int irq, void *dev_id)
+{
+	unsigned long ireg = *R_IRQ_MASK2_RD;
+	struct etrax_dma_descr *descr;
+	unsigned int sentl;
+	int handled = 0;
+	int i;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++) {
+		struct sync_port *port = &ports[i];
+		if (!port->enabled  || !port->use_dma)
+			continue;
+
+		/* IRQ active for the port? */
+		if (!(ireg & (1 << port->output_dma_bit)))
+			continue;
+
+		handled = 1;
+
+		/* Clear IRQ */
+		*port->output_dma_clr_irq =
+			IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) |
+			IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do);
+
+		descr = &port->out_descr;
+		if (!(descr->status & d_stop))
+			sentl = descr->sw_len;
+		else
+			/* Otherwise find amount of data sent here */
+			sentl = descr->hw_len;
+
+		port->out_count -= sentl;
+		port->outp += sentl;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		if (port->out_count) {
+			int c = port->out_buffer + OUT_BUFFER_SIZE - port->outp;
+			if (c > port->out_count)
+				c = port->out_count;
+			DEBUGTXINT(printk(KERN_DEBUG
+				"tx_int DMAWRITE %i %i\n", sentl, c));
+			start_dma(port, port->outp, c);
+		} else  {
+			DEBUGTXINT(printk(KERN_DEBUG
+				"tx_int DMA stop %i\n", sentl));
+			port->tr_running = 0;
+		}
+		/* wake up the waiting process */
+		wake_up_interruptible(&port->out_wait_q);
+	}
+	return IRQ_RETVAL(handled);
+} /* tr_interrupt */
+
+static irqreturn_t rx_interrupt(int irq, void *dev_id)
+{
+	unsigned long ireg = *R_IRQ_MASK2_RD;
+	int i;
+	int handled = 0;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++) {
+		struct sync_port *port = &ports[i];
+
+		if (!port->enabled || !port->use_dma)
+			continue;
+
+		if (!(ireg & (1 << port->input_dma_descr_bit)))
+			continue;
+
+		/* Descriptor interrupt */
+		handled = 1;
+		while (*port->input_dma_descr !=
+				virt_to_phys(port->next_rx_desc)) {
+			if (port->writep + port->inbufchunk > port->flip +
+					port->in_buffer_size) {
+				int first_size = port->flip +
+					port->in_buffer_size - port->writep;
+				memcpy(port->writep,
+					phys_to_virt(port->next_rx_desc->buf),
+					first_size);
+				memcpy(port->flip,
+					phys_to_virt(port->next_rx_desc->buf +
+					first_size),
+					port->inbufchunk - first_size);
+				port->writep = port->flip +
+					port->inbufchunk - first_size;
+			} else {
+				memcpy(port->writep,
+					phys_to_virt(port->next_rx_desc->buf),
+					port->inbufchunk);
+				port->writep += port->inbufchunk;
+				if (port->writep >= port->flip
+						+ port->in_buffer_size)
+					port->writep = port->flip;
+			}
+			if (port->writep == port->readp)
+				port->full = 1;
+			prepare_rx_descriptor(port->next_rx_desc);
+			port->next_rx_desc->ctrl |= d_eol;
+			port->prev_rx_desc->ctrl &= ~d_eol;
+			port->prev_rx_desc = phys_to_virt((unsigned)
+				port->next_rx_desc);
+			port->next_rx_desc = phys_to_virt((unsigned)
+				port->next_rx_desc->next);
+			/* Wake up the waiting process */
+			wake_up_interruptible(&port->in_wait_q);
+			*port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD,
+				cmd, restart);
+			/* DMA has reached end of descriptor */
+			*port->input_dma_clr_irq = IO_STATE(R_DMA_CH0_CLR_INTR,
+				clr_descr, do);
+		}
+	}
+	return IRQ_RETVAL(handled);
+} /* rx_interrupt */
+#endif /* SYNC_SER_DMA */
+
+#ifdef SYNC_SER_MANUAL
+static irqreturn_t manual_interrupt(int irq, void *dev_id)
+{
+	int i;
+	int handled = 0;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++) {
+		struct sync_port *port = &ports[i];
+
+		if (!port->enabled || port->use_dma)
+			continue;
+
+		/* Data received? */
+		if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) {
+			handled = 1;
+			/* Read data */
+			switch (port->ctrl_data_shadow &
+				IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) {
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
+				*port->writep++ =
+					*(volatile char *)port->data_in;
+				break;
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
+			{
+				int data = *(unsigned short *)port->data_in;
+				*port->writep = (data & 0x0ff0) >> 4;
+				*(port->writep + 1) = data & 0x0f;
+				port->writep += 2;
+				break;
+			}
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
+				*(unsigned short *)port->writep =
+					*(volatile unsigned short *)port->data_in;
+				port->writep += 2;
+				break;
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
+				*(unsigned int *)port->writep = *port->data_in;
+				port->writep += 3;
+				break;
+			case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
+				*(unsigned int *)port->writep = *port->data_in;
+				port->writep += 4;
+				break;
+			}
+
+			/* Wrap? */
+			if (port->writep >= port->flip + port->in_buffer_size)
+				port->writep = port->flip;
+			if (port->writep == port->readp) {
+				/* Receive buffer overrun, discard oldest */
+				port->readp++;
+				/* Wrap? */
+				if (port->readp >= port->flip +
+						port->in_buffer_size)
+					port->readp = port->flip;
+			}
+			if (sync_data_avail(port) >= port->inbufchunk) {
+				/* Wake up application */
+				wake_up_interruptible(&port->in_wait_q);
+			}
+		}
+
+		/* Transmitter ready? */
+		if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) {
+			if (port->out_count > 0) {
+				/* More data to send */
+				send_word(port);
+			} else {
+				/* Transmission finished */
+				/* Turn off IRQ */
+				*R_IRQ_MASK1_CLR = 1 <<
+					port->transmitter_ready_bit;
+				/* Wake up application */
+				wake_up_interruptible(&port->out_wait_q);
+			}
+		}
+	}
+	return IRQ_RETVAL(handled);
+}
+#endif
+
+module_init(etrax_sync_serial_init);
diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile
new file mode 100644
index 000000000..4841e822c
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y	:= head.o
+
+
+obj-y   := entry.o traps.o shadows.o debugport.o irq.o \
+	   process.o setup.o signal.o traps.o time.o ptrace.o \
+	   dma.o io_interface_mux.o
+
+obj-$(CONFIG_ETRAX_KGDB) += kgdb.o
+obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
+obj-$(CONFIG_MODULES)    += crisksyms.o
+
+clean:
+
diff --git a/arch/cris/arch-v10/kernel/crisksyms.c b/arch/cris/arch-v10/kernel/crisksyms.c
new file mode 100644
index 000000000..1ca6fc283
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/crisksyms.c
@@ -0,0 +1,16 @@
+#include <linux/module.h>
+#include <asm/io.h>
+#include <arch/svinto.h>
+
+/* Export shadow registers for the CPU I/O pins */
+EXPORT_SYMBOL(genconfig_shadow);
+EXPORT_SYMBOL(port_pa_data_shadow);
+EXPORT_SYMBOL(port_pa_dir_shadow);
+EXPORT_SYMBOL(port_pb_data_shadow);
+EXPORT_SYMBOL(port_pb_dir_shadow);
+EXPORT_SYMBOL(port_pb_config_shadow);
+EXPORT_SYMBOL(port_g_data_shadow);
+
+/* Cache flush functions */
+EXPORT_SYMBOL(flush_etrax_cache);
+EXPORT_SYMBOL(prepare_rx_descriptor);
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
new file mode 100644
index 000000000..7d307cce8
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -0,0 +1,559 @@
+/* Serialport functions for debugging
+ *
+ * Copyright (c) 2000-2007 Axis Communications AB
+ *
+ * Authors:  Bjorn Wesen
+ *
+ * Exports:
+ *    console_print_etrax(char *buf)
+ *    int getDebugChar()
+ *    putDebugChar(int)
+ *    enableDebugIRQ()
+ *    init_etrax_debug()
+ *
+ */
+
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <arch/svinto.h>
+
+extern void reset_watchdog(void);
+
+struct dbg_port
+{
+  unsigned int index;
+  const volatile unsigned* read;
+  volatile char* write;
+  volatile unsigned* xoff;
+  volatile char* baud;
+  volatile char* tr_ctrl;
+  volatile char* rec_ctrl;
+  unsigned long irq;
+  unsigned int started;
+  unsigned long baudrate;
+  unsigned char parity;
+  unsigned int bits;
+};
+
+struct dbg_port ports[]=
+{
+  {
+    0,
+    R_SERIAL0_READ,
+    R_SERIAL0_TR_DATA,
+    R_SERIAL0_XOFF,
+    R_SERIAL0_BAUD,
+    R_SERIAL0_TR_CTRL,
+    R_SERIAL0_REC_CTRL,
+    IO_STATE(R_IRQ_MASK1_SET, ser0_data, set),
+    0,
+    115200,
+    'N',
+    8
+  },
+  {
+    1,
+    R_SERIAL1_READ,
+    R_SERIAL1_TR_DATA,
+    R_SERIAL1_XOFF,
+    R_SERIAL1_BAUD,
+    R_SERIAL1_TR_CTRL,
+    R_SERIAL1_REC_CTRL,
+    IO_STATE(R_IRQ_MASK1_SET, ser1_data, set),
+    0,
+    115200,
+    'N',
+    8
+  },
+  {
+    2,
+    R_SERIAL2_READ,
+    R_SERIAL2_TR_DATA,
+    R_SERIAL2_XOFF,
+    R_SERIAL2_BAUD,
+    R_SERIAL2_TR_CTRL,
+    R_SERIAL2_REC_CTRL,
+    IO_STATE(R_IRQ_MASK1_SET, ser2_data, set),
+    0,
+    115200,
+    'N',
+    8
+  },
+  {
+    3,
+    R_SERIAL3_READ,
+    R_SERIAL3_TR_DATA,
+    R_SERIAL3_XOFF,
+    R_SERIAL3_BAUD,
+    R_SERIAL3_TR_CTRL,
+    R_SERIAL3_REC_CTRL,
+    IO_STATE(R_IRQ_MASK1_SET, ser3_data, set),
+    0,
+    115200,
+    'N',
+    8
+  }
+};
+
+#ifdef CONFIG_ETRAX_SERIAL
+extern struct tty_driver *serial_driver;
+#endif
+
+struct dbg_port* port =
+#if defined(CONFIG_ETRAX_DEBUG_PORT0)
+  &ports[0];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+  &ports[1];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+  &ports[2];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+  &ports[3];
+#else
+  NULL;
+#endif
+
+static struct dbg_port* kgdb_port =
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+  &ports[0];
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+  &ports[1];
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+  &ports[2];
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+  &ports[3];
+#else
+  NULL;
+#endif
+
+static void
+start_port(struct dbg_port* p)
+{
+	unsigned long rec_ctrl = 0;
+	unsigned long tr_ctrl = 0;
+
+	if (!p)
+		return;
+
+	if (p->started)
+		return;
+	p->started = 1;
+
+	if (p->index == 0)
+	{
+		genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
+	}
+	else if (p->index == 1)
+	{
+		genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
+	}
+	else if (p->index == 2)
+	{
+		genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
+		genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser2, select);
+	}
+	else
+	{
+		genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
+		genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser3, select);
+	}
+
+	*R_GEN_CONFIG = genconfig_shadow;
+
+	*p->xoff =
+		IO_STATE(R_SERIAL0_XOFF, tx_stop, enable) |
+		IO_STATE(R_SERIAL0_XOFF, auto_xoff, disable) |
+		IO_FIELD(R_SERIAL0_XOFF, xoff_char, 0);
+
+	switch (p->baudrate)
+	{
+	case 0:
+	case 115200:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
+		break;
+	case 1200:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c1200Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c1200Hz);
+		break;
+	case 2400:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c2400Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c2400Hz);
+		break;
+	case 4800:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c4800Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c4800Hz);
+		break;
+	case 9600:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c9600Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c9600Hz);
+		  break;
+	case 19200:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c19k2Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c19k2Hz);
+		 break;
+	case 38400:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c38k4Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c38k4Hz);
+		break;
+	case 57600:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c57k6Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c57k6Hz);
+		break;
+	default:
+		*p->baud =
+		  IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
+		  IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
+		  break;
+        }
+
+	if (p->parity == 'E') {
+		rec_ctrl =
+		  IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
+		  IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
+		tr_ctrl =
+		  IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
+		  IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
+	} else if (p->parity == 'O') {
+		rec_ctrl =
+		  IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd) |
+		  IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
+		tr_ctrl =
+		  IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd) |
+		  IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
+	} else {
+		rec_ctrl =
+		  IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
+		  IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, disable);
+		tr_ctrl =
+		  IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
+		  IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, disable);
+	}
+	if (p->bits == 7)
+	{
+		rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
+		tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
+	}
+	else
+	{
+		rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit);
+		tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit);
+	}
+
+	*p->rec_ctrl =
+		IO_STATE(R_SERIAL0_REC_CTRL, dma_err, stop) |
+		IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable) |
+		IO_STATE(R_SERIAL0_REC_CTRL, rts_, active) |
+		IO_STATE(R_SERIAL0_REC_CTRL, sampling, middle) |
+		IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, normal) |
+		rec_ctrl;
+
+	*p->tr_ctrl =
+		IO_FIELD(R_SERIAL0_TR_CTRL, txd, 0) |
+		IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable) |
+		IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, disabled) |
+		IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, one_bit) |
+		IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, normal) |
+		tr_ctrl;
+}
+
+static void
+console_write_direct(struct console *co, const char *buf, unsigned int len)
+{
+	int i;
+	unsigned long flags;
+
+        if (!port)
+		return;
+
+	local_irq_save(flags);
+
+	/* Send data */
+	for (i = 0; i < len; i++) {
+		/* LF -> CRLF */
+		if (buf[i] == '\n') {
+			while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+			;
+			*port->write = '\r';
+		}
+		/* Wait until transmitter is ready and send.*/
+		while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+			;
+		*port->write = buf[i];
+	}
+
+	/*
+	 * Feed the watchdog, otherwise it will reset the chip during boot.
+	 * The time to send an ordinary boot message line (10-90 chars)
+	 * varies between 1-8ms at 115200. What makes up for the additional
+	 * 90ms that allows the watchdog to bite?
+	*/
+	reset_watchdog();
+
+	local_irq_restore(flags);
+}
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+	if (!port)
+		return;
+
+        console_write_direct(co, buf, len);
+}
+
+/* legacy function */
+
+void
+console_print_etrax(const char *buf)
+{
+	console_write(NULL, buf, strlen(buf));
+}
+
+/* Use polling to get a single character FROM the debug port */
+
+int
+getDebugChar(void)
+{
+	unsigned long readval;
+
+	if (!kgdb_port)
+		return 0;
+
+	do {
+		readval = *kgdb_port->read;
+	} while (!(readval & IO_MASK(R_SERIAL0_READ, data_avail)));
+
+	return (readval & IO_MASK(R_SERIAL0_READ, data_in));
+}
+
+/* Use polling to put a single character to the debug port */
+
+void
+putDebugChar(int val)
+{
+	if (!kgdb_port)
+		return;
+
+	while (!(*kgdb_port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+		;
+	*kgdb_port->write = val;
+}
+
+/* Enable irq for receiving chars on the debug port, used by kgdb */
+
+void
+enableDebugIRQ(void)
+{
+	if (!kgdb_port)
+		return;
+
+	*R_IRQ_MASK1_SET = kgdb_port->irq;
+	/* use R_VECT_MASK directly, since we really bypass Linux normal
+	 * IRQ handling in kgdb anyway, we don't need to use enable_irq
+	 */
+	*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
+
+	*kgdb_port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
+}
+
+static int __init
+console_setup(struct console *co, char *options)
+{
+	char* s;
+
+	if (options) {
+		port = &ports[co->index];
+		port->baudrate = 115200;
+                port->parity = 'N';
+                port->bits = 8;
+		port->baudrate = simple_strtoul(options, NULL, 10);
+		s = options;
+		while(*s >= '0' && *s <= '9')
+			s++;
+		if (*s) port->parity = *s++;
+		if (*s) port->bits   = *s++ - '0';
+		port->started = 0;
+		start_port(0);
+	}
+	return 0;
+}
+
+
+/* This is a dummy serial device that throws away anything written to it.
+ * This is used when no debug output is wanted.
+ */
+static struct tty_driver dummy_driver;
+
+static int dummy_open(struct tty_struct *tty, struct file * filp)
+{
+	return 0;
+}
+
+static void dummy_close(struct tty_struct *tty, struct file * filp)
+{
+}
+
+static int dummy_write(struct tty_struct * tty,
+                       const unsigned char *buf, int count)
+{
+	return count;
+}
+
+static int dummy_write_room(struct tty_struct *tty)
+{
+	return 8192;
+}
+
+static const struct tty_operations dummy_ops = {
+	.open = dummy_open,
+	.close = dummy_close,
+	.write = dummy_write,
+	.write_room = dummy_write_room,
+};
+
+void __init
+init_dummy_console(void)
+{
+	memset(&dummy_driver, 0, sizeof(struct tty_driver));
+	dummy_driver.driver_name = "serial";
+	dummy_driver.name = "ttyS";
+	dummy_driver.major = TTY_MAJOR;
+	dummy_driver.minor_start = 68;
+	dummy_driver.num = 1;       /* etrax100 has 4 serial ports */
+	dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
+	dummy_driver.subtype = SERIAL_TYPE_NORMAL;
+	dummy_driver.init_termios = tty_std_termios;
+	/* Normally B9600 default... */
+	dummy_driver.init_termios.c_cflag =
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	dummy_driver.init_termios.c_ispeed = 115200;
+	dummy_driver.init_termios.c_ospeed = 115200;
+
+	dummy_driver.ops = &dummy_ops;
+	if (tty_register_driver(&dummy_driver))
+		panic("Couldn't register dummy serial driver\n");
+}
+
+static struct tty_driver*
+etrax_console_device(struct console* co, int *index)
+{
+	if (port)
+		*index = port->index;
+	else
+		*index = 0;
+#ifdef CONFIG_ETRAX_SERIAL
+        return port ? serial_driver : &dummy_driver;
+#else
+	return &dummy_driver;
+#endif
+}
+
+static struct console sercons = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : etrax_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : -1,
+	cflag : 0,
+	next : NULL
+};
+static struct console sercons0 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : etrax_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 0,
+	cflag : 0,
+	next : NULL
+};
+
+static struct console sercons1 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : etrax_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 1,
+	cflag : 0,
+	next : NULL
+};
+static struct console sercons2 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : etrax_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 2,
+	cflag : 0,
+	next : NULL
+};
+static struct console sercons3 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : etrax_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 3,
+	cflag : 0,
+	next : NULL
+};
+/*
+ *      Register console (for printk's etc)
+ */
+
+int __init
+init_etrax_debug(void)
+{
+	static int first = 1;
+
+	if (!first) {
+		unregister_console(&sercons);
+		register_console(&sercons0);
+		register_console(&sercons1);
+		register_console(&sercons2);
+		register_console(&sercons3);
+                init_dummy_console();
+		return 0;
+	}
+
+	first = 0;
+	register_console(&sercons);
+	start_port(port);
+#ifdef CONFIG_ETRAX_KGDB
+	start_port(kgdb_port);
+#endif
+	return 0;
+}
+__initcall(init_etrax_debug);
diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c
new file mode 100644
index 000000000..579504735
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/dma.c
@@ -0,0 +1,287 @@
+/* Wrapper for DMA channel allocator that updates DMA client muxing.
+ * Copyright 2004-2007, Axis Communications AB
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <asm/dma.h>
+#include <arch/svinto.h>
+#include <arch/system.h>
+
+/* Macro to access ETRAX 100 registers */
+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
+					  IO_STATE_(reg##_, field##_, _##val)
+
+
+static char used_dma_channels[MAX_DMA_CHANNELS];
+static const char * used_dma_channels_users[MAX_DMA_CHANNELS];
+
+int cris_request_dma(unsigned int dmanr, const char * device_id,
+		     unsigned options, enum dma_owner owner)
+{
+	unsigned long flags;
+	unsigned long int gens;
+	int fail = -EINVAL;
+
+	if (dmanr >= MAX_DMA_CHANNELS) {
+		printk(KERN_CRIT "cris_request_dma: invalid DMA channel %u\n", dmanr);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+	if (used_dma_channels[dmanr]) {
+		local_irq_restore(flags);
+		if (options & DMA_VERBOSE_ON_ERROR) {
+			printk(KERN_CRIT "Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]);
+		}
+		if (options & DMA_PANIC_ON_ERROR) {
+			panic("request_dma error!");
+		}
+		return -EBUSY;
+	}
+
+	gens = genconfig_shadow;
+
+	switch(owner)
+	{
+	case dma_eth:
+		if ((dmanr != NETWORK_TX_DMA_NBR) &&
+		    (dmanr != NETWORK_RX_DMA_NBR)) {
+			printk(KERN_CRIT "Invalid DMA channel for eth\n");
+			goto bail;
+		}
+		break;
+	case dma_ser0:
+		if (dmanr == SER0_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma6, serial0);
+		} else if (dmanr == SER0_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma7, serial0);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ser0\n");
+			goto bail;
+		}
+		break;
+	case dma_ser1:
+		if (dmanr == SER1_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma8, serial1);
+		} else if (dmanr == SER1_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma9, serial1);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ser1\n");
+			goto bail;
+		}
+		break;
+	case dma_ser2:
+		if (dmanr == SER2_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma2, serial2);
+		} else if (dmanr == SER2_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma3, serial2);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ser2\n");
+			goto bail;
+		}
+		break;
+	case dma_ser3:
+		if (dmanr == SER3_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma4, serial3);
+		} else if (dmanr == SER3_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma5, serial3);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ser3\n");
+			goto bail;
+		}
+		break;
+	case dma_ata:
+		if (dmanr == ATA_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma2, ata);
+		} else if (dmanr == ATA_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma3, ata);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ata\n");
+			goto bail;
+		}
+		break;
+	case dma_ext0:
+		if (dmanr == EXTDMA0_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma4, extdma0);
+		} else if (dmanr == EXTDMA0_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma5, extdma0);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ext0\n");
+			goto bail;
+		}
+		break;
+	case dma_ext1:
+		if (dmanr == EXTDMA1_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma6, extdma1);
+		} else if (dmanr == EXTDMA1_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma7, extdma1);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for ext1\n");
+			goto bail;
+		}
+		break;
+	case dma_int6:
+		if (dmanr == MEM2MEM_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma7, intdma6);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for int6\n");
+			goto bail;
+		}
+		break;
+	case dma_int7:
+		if (dmanr == MEM2MEM_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma6, intdma7);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for int7\n");
+			goto bail;
+		}
+		break;
+	case dma_usb:
+		if (dmanr == USB_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma8, usb);
+		} else if (dmanr == USB_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma9, usb);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for usb\n");
+			goto bail;
+		}
+		break;
+	case dma_scsi0:
+		if (dmanr == SCSI0_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma2, scsi0);
+		} else if (dmanr == SCSI0_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma3, scsi0);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for scsi0\n");
+			goto bail;
+		}
+		break;
+	case dma_scsi1:
+		if (dmanr == SCSI1_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma4, scsi1);
+		} else if (dmanr == SCSI1_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma5, scsi1);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for scsi1\n");
+			goto bail;
+		}
+		break;
+	case dma_par0:
+		if (dmanr == PAR0_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma2, par0);
+		} else if (dmanr == PAR0_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma3, par0);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for par0\n");
+			goto bail;
+		}
+		break;
+	case dma_par1:
+		if (dmanr == PAR1_TX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma4, par1);
+		} else if (dmanr == PAR1_RX_DMA_NBR) {
+			SETS(gens, R_GEN_CONFIG, dma5, par1);
+		} else {
+			printk(KERN_CRIT "Invalid DMA channel for par1\n");
+			goto bail;
+		}
+		break;
+	default:
+		printk(KERN_CRIT "Invalid DMA owner.\n");
+		goto bail;
+	}
+
+	used_dma_channels[dmanr] = 1;
+	used_dma_channels_users[dmanr] = device_id;
+
+	{
+		volatile int i;
+		genconfig_shadow = gens;
+		*R_GEN_CONFIG = genconfig_shadow;
+		/* Wait 12 cycles before doing any DMA command */
+		for(i = 6; i > 0; i--)
+			nop();
+	}
+	fail = 0;
+ bail:
+	local_irq_restore(flags);
+	return fail;
+}
+
+void cris_free_dma(unsigned int dmanr, const char * device_id)
+{
+	unsigned long flags;
+	if (dmanr >= MAX_DMA_CHANNELS) {
+		printk(KERN_CRIT "cris_free_dma: invalid DMA channel %u\n", dmanr);
+		return;
+	}
+
+	local_irq_save(flags);
+	if (!used_dma_channels[dmanr]) {
+		printk(KERN_CRIT "cris_free_dma: DMA channel %u not allocated\n", dmanr);
+	} else if (device_id != used_dma_channels_users[dmanr]) {
+		printk(KERN_CRIT "cris_free_dma: DMA channel %u not allocated by device\n", dmanr);
+	} else {
+		switch(dmanr)
+		{
+		case 0:
+			*R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH0_CMD, cmd, *R_DMA_CH0_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH0_CMD, cmd, reset));
+			break;
+		case 1:
+			*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH1_CMD, cmd, *R_DMA_CH1_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH1_CMD, cmd, reset));
+			break;
+		case 2:
+			*R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH2_CMD, cmd, *R_DMA_CH2_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH2_CMD, cmd, reset));
+			break;
+		case 3:
+			*R_DMA_CH3_CMD = IO_STATE(R_DMA_CH3_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH3_CMD, cmd, *R_DMA_CH3_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH3_CMD, cmd, reset));
+			break;
+		case 4:
+			*R_DMA_CH4_CMD = IO_STATE(R_DMA_CH4_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH4_CMD, cmd, *R_DMA_CH4_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH4_CMD, cmd, reset));
+			break;
+		case 5:
+			*R_DMA_CH5_CMD = IO_STATE(R_DMA_CH5_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH5_CMD, cmd, *R_DMA_CH5_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH5_CMD, cmd, reset));
+			break;
+		case 6:
+			*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *R_DMA_CH6_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+			break;
+		case 7:
+			*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH7_CMD, cmd, *R_DMA_CH7_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH7_CMD, cmd, reset));
+			break;
+		case 8:
+			*R_DMA_CH8_CMD = IO_STATE(R_DMA_CH8_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH8_CMD, cmd, *R_DMA_CH8_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH8_CMD, cmd, reset));
+			break;
+		case 9:
+			*R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, reset);
+			while (IO_EXTRACT(R_DMA_CH9_CMD, cmd, *R_DMA_CH9_CMD) ==
+			       IO_STATE_VALUE(R_DMA_CH9_CMD, cmd, reset));
+			break;
+		}
+		used_dma_channels[dmanr] = 0;
+	}
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(cris_request_dma);
+EXPORT_SYMBOL(cris_free_dma);
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
new file mode 100644
index 000000000..81570fcd0
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -0,0 +1,969 @@
+/*
+ *  linux/arch/cris/entry.S
+ *
+ *  Copyright (C) 2000, 2001, 2002 Axis Communications AB
+ *
+ *  Authors:	Bjorn Wesen (bjornw@axis.com)
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ *	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace.c and ptrace.h
+ *
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <arch/sv_addr_ag.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+	;; functions exported from this file
+
+	.globl system_call
+	.globl ret_from_intr
+	.globl ret_from_fork
+	.globl ret_from_kernel_thread
+	.globl resume
+	.globl multiple_interrupt
+	.globl hwbreakpoint
+	.globl IRQ1_interrupt
+	.globl spurious_interrupt
+	.globl hw_bp_trigs
+	.globl mmu_bus_fault
+	.globl do_sigtrap
+	.globl gdb_handle_breakpoint
+	.globl sys_call_table
+
+	;; below are various parts of system_call which are not in the fast-path
+
+#ifdef CONFIG_PREEMPT
+	; Check if preemptive kernel scheduling should be done
+_resume_kernel:
+	di
+	; Load current task struct
+	movs.w	-8192, $r0	;  THREAD_SIZE = 8192
+	and.d	$sp, $r0
+	move.d	[$r0+TI_preempt_count], $r10	;  Preemption disabled?
+	bne	_Rexit
+	nop
+_need_resched:
+	move.d	[$r0+TI_flags], $r10
+	btstq	TIF_NEED_RESCHED, $r10	; Check if need_resched is set
+	bpl	_Rexit
+	nop
+	; Ok, lets's do some preemptive kernel scheduling
+	jsr	preempt_schedule_irq
+	; Load new task struct
+	movs.w	-8192, $r0	;  THREAD_SIZE = 8192
+	and.d	$sp, $r0
+	; One more time (with new task)
+	ba	_need_resched
+	nop
+#else
+#define _resume_kernel _Rexit
+#endif
+
+	; Called at exit from fork. schedule_tail must be called to drop
+	; spinlock if CONFIG_PREEMPT
+ret_from_fork:
+	jsr schedule_tail
+	ba  ret_from_sys_call
+	nop
+
+ret_from_kernel_thread:
+	jsr schedule_tail
+	move.d	$r2, $r10	; argument is here
+	jsr	$r1		; call the payload
+	moveq	0, $r9		; no syscall restarts, TYVM...
+	ba  ret_from_sys_call
+
+ret_from_intr:
+	;; check for resched if preemptive kernel or if we're going back to user-mode
+	;; this test matches the user_regs(regs) macro
+	;; we cannot simply test $dccr, because that does not necessarily
+	;; reflect what mode we'll return into.
+
+	move.d	[$sp + PT_dccr], $r0; regs->dccr
+	btstq	8, $r0		; U-flag
+	bpl     _resume_kernel
+	; Note that di below is in delay slot
+
+_resume_userspace:
+	di			; so need_resched and sigpending don't change
+
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	move.d	[$r0+TI_flags], $r10	; current->work
+	and.d	_TIF_WORK_MASK, $r10	; is there any work to be done on return
+	bne	_work_pending
+	nop
+	ba	_Rexit
+	nop
+
+	;; The system_call is called by a BREAK instruction, which works like
+	;; an interrupt call but it stores the return PC in BRP instead of IRP.
+	;; Since we dont really want to have two epilogues (one for system calls
+	;; and one for interrupts) we push the contents of BRP instead of IRP in the
+	;; system call prologue, to make it look like an ordinary interrupt on the
+	;; stackframe.
+	;;
+	;; Since we can't have system calls inside interrupts, it should not matter
+	;; that we don't stack IRP.
+	;;
+	;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp
+	;;
+	;; This function looks on the _surface_ like spaghetti programming, but it's
+	;; really designed so that the fast-path does not force cache-loading of non-used
+	;; instructions. Only the non-common cases cause the outlined code to run..
+
+system_call:
+	;; stack-frame similar to the irq heads, which is reversed in ret_from_sys_call
+	move	$brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+	push	$srp
+	push	$dccr
+	push	$mof
+	subq	14*4, $sp		; make room for r0-r13
+	movem	$r13, [$sp]	; push r0-r13
+	push	$r10		; push orig_r10
+	clear.d [$sp=$sp-4]	; frametype == 0, normal stackframe
+
+	movs.w	-ENOSYS, $r0
+	move.d	$r0, [$sp+PT_r10]	; put the default return value in r10 in the frame
+
+	;; check if this process is syscall-traced
+
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	move.d	[$r0+TI_flags], $r0
+	btstq   TIF_SYSCALL_TRACE, $r0
+	bmi	_syscall_trace_entry
+	nop
+
+_syscall_traced:
+
+	;; check for sanity in the requested syscall number
+
+	cmpu.w	NR_syscalls, $r9
+	bcc	ret_from_sys_call
+	lslq	2, $r9		;  multiply by 4, in the delay slot
+
+	;; as a bonus 7th parameter, we give the location on the stack
+	;; of the register structure itself. some syscalls need this.
+
+	push	$sp
+
+	;; the parameter carrying registers r10, r11, r12 and 13 are intact.
+	;; the fifth and sixth parameters (if any) was in mof and srp
+	;; respectively, and we need to put them on the stack.
+
+	push	$srp
+	push	$mof
+
+	jsr	[$r9+sys_call_table]	; actually do the system call
+	addq	3*4, $sp		; pop the mof, srp and regs parameters
+	move.d	$r10, [$sp+PT_r10]	; save the return value
+
+	moveq	1, $r9		; "parameter" to ret_from_sys_call to show it was a sys call
+
+	;; fall through into ret_from_sys_call to return
+
+ret_from_sys_call:
+	;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq
+
+	;; get the current task-struct pointer (see top for defs)
+
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	di			; make sure need_resched and sigpending don't change
+	move.d	[$r0+TI_flags],$r1
+	and.d	_TIF_ALLWORK_MASK, $r1
+	bne	_syscall_exit_work
+	nop
+
+_Rexit:
+	;; this epilogue MUST match the prologues in multiple_interrupt, irq.h and ptregs.h
+	pop	$r10		; frametype
+	bne	_RBFexit	; was not CRIS_FRAME_NORMAL, handle otherwise
+	addq	4, $sp		; skip orig_r10, in delayslot
+	movem	[$sp+], $r13	; registers r0-r13
+	pop	$mof		; multiply overflow register
+	pop	$dccr		; condition codes
+	pop	$srp		; subroutine return pointer
+	;; now we have a 4-word SBFS frame which we do not want to restore
+	;; using RBF since it was not stacked with SBFS. instead we would like to
+	;; just get the PC value to restart it with, and skip the rest of
+	;; the frame.
+	;; Also notice that it's important to use instructions here that
+	;; keep the interrupts disabled (since we've already popped DCCR)
+	move	[$sp=$sp+16], $p8; pop the SBFS frame from the sp
+	jmpu	[$sp-16]	; return through the irp field in the sbfs frame
+
+_RBFexit:
+	movem	[$sp+], $r13	; registers r0-r13, in delay slot
+	pop	$mof		; multiply overflow register
+	pop	$dccr		; condition codes
+	pop	$srp		; subroutine return pointer
+	rbf	[$sp+]		; return by popping the CPU status
+
+	;; We get here after doing a syscall if extra work might need to be done
+	;; perform syscall exit tracing if needed
+
+_syscall_exit_work:
+	;; $r0 contains current at this point and irq's are disabled
+
+	move.d  [$r0+TI_flags], $r1
+	btstq	TIF_SYSCALL_TRACE, $r1
+	bpl	_work_pending
+	nop
+
+	ei
+
+	move.d	$r9, $r1	; preserve r9
+	jsr	do_syscall_trace
+	move.d	$r1, $r9
+
+	ba	_resume_userspace
+	nop
+
+_work_pending:
+	move.d  [$r0+TI_flags], $r1
+	btstq   TIF_NEED_RESCHED, $r1
+	bpl	_work_notifysig	; was neither trace nor sched, must be signal/notify
+	nop
+
+_work_resched:
+	move.d	$r9, $r1	; preserve r9
+	jsr	schedule
+	move.d	$r1, $r9
+	di
+
+	move.d	[$r0+TI_flags], $r1
+	and.d	_TIF_WORK_MASK, $r1; ignore the syscall trace counter
+	beq	_Rexit
+	nop
+	btstq	TIF_NEED_RESCHED, $r1
+	bmi	_work_resched	; current->work.need_resched
+	nop
+
+_work_notifysig:
+	;; deal with pending signals and notify-resume requests
+
+	move.d	$r9, $r10	; do_notify_resume syscall/irq param
+	move.d	$sp, $r11	; the regs param
+	move.d  $r1, $r12	; the thread_info_flags parameter
+	jsr	do_notify_resume
+
+	ba _Rexit
+	nop
+
+	;; We get here as a sidetrack when we've entered a syscall with the
+	;; trace-bit set. We need to call do_syscall_trace and then continue
+	;; with the call.
+
+_syscall_trace_entry:
+	;; PT_r10 in the frame contains -ENOSYS as required, at this point
+
+	jsr	do_syscall_trace
+
+	;; now re-enter the syscall code to do the syscall itself
+	;; we need to restore $r9 here to contain the wanted syscall, and
+	;; the other parameter-bearing registers
+
+	move.d	[$sp+PT_r9], $r9
+	move.d	[$sp+PT_orig_r10], $r10  ; PT_r10 is already filled with -ENOSYS.
+	move.d	[$sp+PT_r11],      $r11
+	move.d	[$sp+PT_r12],      $r12
+	move.d	[$sp+PT_r13],      $r13
+	move	[$sp+PT_mof],      $mof
+	move	[$sp+PT_srp],      $srp
+
+	ba	_syscall_traced
+	nop
+
+	;; resume performs the actual task-switching, by switching stack pointers
+	;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct
+	;; returns old current in r10
+	;;
+	;; TODO:  see the i386 version. The switch_to which calls resume in our version
+	;;        could really be an inline asm of this.
+
+resume:
+	push	$srp		         ; we keep the old/new PC on the stack
+	add.d	$r12, $r10		 ; r10 = current tasks tss
+	move	$dccr, [$r10+THREAD_dccr]; save irq enable state
+	di
+
+	move	$usp, [$r10+ THREAD_usp] ; save user-mode stackpointer
+
+	;; See copy_thread for the reason why register R9 is saved.
+	subq	10*4, $sp
+	movem	$r9, [$sp]		 ; save non-scratch registers and R9.
+
+	move.d	$sp, [$r10+THREAD_ksp]	 ; save the kernel stack pointer for the old task
+	move.d	$sp, $r10		 ; return last running task in r10
+	and.d   -8192, $r10	         ; get thread_info from stackpointer
+	move.d  [$r10+TI_task], $r10     ; get task
+	add.d	$r12, $r11		 ; find the new tasks tss
+	move.d	[$r11+THREAD_ksp], $sp	 ; switch into the new stackframe by restoring kernel sp
+
+	movem	[$sp+], $r9		 ; restore non-scratch registers and R9.
+
+	move	[$r11+THREAD_usp], $usp ; restore user-mode stackpointer
+
+	move	[$r11+THREAD_dccr], $dccr ; restore irq enable status
+	jump	[$sp+]		         ; restore PC
+
+	;; This is the MMU bus fault handler.
+	;; It needs to stack the CPU status and overall is different
+	;; from the other interrupt handlers.
+
+mmu_bus_fault:
+	;; For refills we try to do a quick page table lookup. If it is
+	;; a real fault we let the mm subsystem handle it.
+
+	;; the first longword in the sbfs frame was the interrupted PC
+	;; which fits nicely with the "IRP" slot in pt_regs normally used to
+	;; contain the return address. used by Oops to print kernel errors.
+	sbfs	[$sp=$sp-16]	; push the internal CPU status
+	push	$dccr
+	di
+	subq	2*4, $sp
+	movem	$r1, [$sp]
+	move.d  [R_MMU_CAUSE], $r1
+	;; ETRAX 100LX TR89 bugfix: if the second half of an unaligned
+	;; write causes a MMU-fault, it will not be restarted correctly.
+	;; This could happen if a write crosses a page-boundary and the
+	;; second page is not yet COW'ed or even loaded. The workaround
+	;; is to clear the unaligned bit in the CPU status record, so
+	;; that the CPU will rerun both the first and second halves of
+	;; the instruction. This will not have any sideeffects unless
+	;; the first half goes to any device or memory that can't be
+	;; written twice, and which is mapped through the MMU.
+	;;
+	;; We only need to do this for writes.
+	btstq	8, $r1		   ; Write access?
+	bpl	1f
+	nop
+	move.d	[$sp+16], $r0	   ; Clear unaligned bit in csrinstr
+	and.d	~(1<<5), $r0
+	move.d	$r0, [$sp+16]
+1:	btstq	12, $r1		   ; Refill?
+	bpl	2f
+	lsrq	24, $r1     ; Get PGD index (bit 24-31)
+	move.d  [current_pgd], $r0 ; PGD for the current process
+	move.d	[$r0+$r1.d], $r0   ; Get PMD
+	beq	2f
+	nop
+	and.w	PAGE_MASK, $r0	   ; Remove PMD flags
+	move.d  [R_MMU_CAUSE], $r1
+	lsrq	PAGE_SHIFT, $r1
+	and.d	0x7ff, $r1         ; Get PTE index into PGD (bit 13-23)
+	move.d	[$r0+$r1.d], $r1   ; Get PTE
+	beq	2f
+	nop
+	;; Store in TLB
+	move.d  $r1, [R_TLB_LO]
+	;; Return
+	movem	[$sp+], $r1
+	pop	$dccr
+	rbf	[$sp+]		; return by popping the CPU status
+
+2:	; PMD or PTE missing, let the mm subsystem fix it up.
+	movem	[$sp+], $r1
+	pop	$dccr
+
+	; Ok, not that easy, pass it on to the mm subsystem
+	; The MMU status record is now on the stack
+	push	$srp		; make a stackframe similar to pt_regs
+	push	$dccr
+	push	$mof
+	di
+	subq	14*4, $sp
+	movem	$r13, [$sp]
+	push	$r10		; dummy orig_r10
+	moveq	1, $r10
+	push	$r10		; frametype == 1, BUSFAULT frame type
+
+	move.d	$sp, $r10	; pt_regs argument to handle_mmu_bus_fault
+
+	jsr	handle_mmu_bus_fault  ; in arch/cris/arch-v10/mm/fault.c
+
+	;; now we need to return through the normal path, we cannot just
+	;; do the RBFexit since we might have killed off the running
+	;; process due to a SEGV, scheduled due to a page blocking or
+	;; whatever.
+
+	moveq	0, $r9		; busfault is equivalent to an irq
+
+	ba	ret_from_intr
+	nop
+
+	;; special handlers for breakpoint and NMI
+hwbreakpoint:
+	push	$dccr
+	di
+	push	$r10
+	push	$r11
+	move.d	[hw_bp_trig_ptr],$r10
+	move	$brp,$r11
+	move.d	$r11,[$r10+]
+	move.d	$r10,[hw_bp_trig_ptr]
+1:	pop	$r11
+	pop	$r10
+	pop	$dccr
+	retb
+	nop
+
+IRQ1_interrupt:
+	;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!!
+	move	$brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+	push	$srp
+	push	$dccr
+	push	$mof
+	di
+	subq	14*4, $sp
+	movem	$r13, [$sp]
+	push	$r10		; push orig_r10
+	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
+
+	;; If there is a glitch on the NMI pin shorter than ~100ns
+	;; (i.e. non-active by the time we get here) then the nmi_pin bit
+	;; in R_IRQ_MASK0_RD will already be cleared.  The watchdog_nmi bit
+	;; is cleared by us however (when feeding the watchdog), which is why
+	;; we use that bit to determine what brought us here.
+
+	move.d	[R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
+	and.d   (1<<30), $r1
+	bne	wdog
+	move.d  $sp, $r10
+	jsr	handle_nmi
+	setf m			; Enable NMI again
+	ba	_Rexit		; Return the standard way
+	nop
+wdog:
+#if defined(CONFIG_ETRAX_WATCHDOG)
+;; Check if we're waiting for reset to happen, as signalled by
+;; hard_reset_now setting cause_of_death to a magic value.  If so, just
+;; get stuck until reset happens.
+	.comm	cause_of_death, 4	;; Don't declare this anywhere.
+	move.d	[cause_of_death], $r10
+	cmp.d	0xbedead, $r10
+_killed_by_death:
+	beq	_killed_by_death
+	nop
+
+;; We'll see this in ksymoops dumps.
+Watchdog_bite:
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+       ;; We just restart the watchdog here to be sure we dont get
+       ;; hit while printing the watchdogmsg below
+       ;; This restart is compatible with the rest of the C-code, so
+       ;; the C-code can keep restarting the watchdog after this point.
+       ;; The non-NICE_DOGGY code below though, disables the possibility
+       ;; to restart since it changes the watchdog key, to avoid any
+       ;; buggy loops etc. keeping the watchdog alive after this.
+       jsr     reset_watchdog
+#else
+
+;; We need to extend the 3.3ms after the NMI at watchdog bite, so we have
+;; time for an oops-dump over a 115k2 serial wire.  Another 100ms should do.
+
+;; Change the watchdog key to an arbitrary 3-bit value and restart the
+;; watchdog.
+#define WD_INIT 2
+	moveq	  IO_FIELD (R_WATCHDOG, key, WD_INIT), $r10
+	move.d	R_WATCHDOG, $r11
+
+	move.d	$r10, [$r11]
+	moveq	  IO_FIELD (R_WATCHDOG, key,				\
+			    IO_EXTRACT (R_WATCHDOG, key,		\
+					IO_MASK (R_WATCHDOG, key))	\
+			    ^ WD_INIT)					\
+		| IO_STATE (R_WATCHDOG, enable, start), $r10
+	move.d	$r10, [$r11]
+
+#endif
+
+;; Note that we don't do "setf m" here (or after two necessary NOPs),
+;; since *not* doing that saves us from re-entrancy checks.  We don't want
+;; to get here again due to possible subsequent NMIs; we want the watchdog
+;; to reset us.
+
+	move.d	_watchdogmsg,$r10
+	jsr	printk
+
+	move.d	$sp, $r10
+	jsr	watchdog_bite_hook
+
+;; This nop is here so we see the "Watchdog_bite" label in ksymoops dumps
+;; rather than "spurious_interrupt".
+	nop
+;; At this point we drop down into spurious_interrupt, which will do a
+;; hard reset.
+
+	.section .rodata,"a"
+_watchdogmsg:
+	.ascii	"Oops: bitten by watchdog\n\0"
+	.previous
+
+#endif /* CONFIG_ETRAX_WATCHDOG */
+
+spurious_interrupt:
+	di
+	jump hard_reset_now
+
+	;; this handles the case when multiple interrupts arrive at the same time
+	;; we jump to the first set interrupt bit in a priority fashion
+	;; the hardware will call the unserved interrupts after the handler finishes
+
+multiple_interrupt:
+	;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!!
+	move	$irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+	push	$srp
+	push	$dccr
+	push	$mof
+	di
+	subq	14*4, $sp
+	movem	$r13, [$sp]
+	push	$r10		; push orig_r10
+	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
+
+	move.d  $sp, $r10
+	jsr	do_multiple_IRQ
+
+	jump    ret_from_intr
+
+do_sigtrap:
+	;;
+	;; SIGTRAP the process that executed the break instruction.
+	;; Make a frame that Rexit in entry.S expects.
+	;;
+	move	$brp, [$sp=$sp-16]	; Push BRP while faking a cpu status record.
+	push	$srp			; Push subroutine return pointer.
+	push	$dccr			; Push condition codes.
+	push	$mof			; Push multiply overflow reg.
+	di				; Need to disable irq's at this point.
+	subq	14*4, $sp		; Make room for r0-r13.
+	movem	$r13, [$sp]		; Push the r0-r13 registers.
+	push	$r10			; Push orig_r10.
+	clear.d	[$sp=$sp-4]		; Frametype - this is a normal stackframe.
+
+	movs.w	-8192,$r9		; THREAD_SIZE == 8192
+	and.d	$sp, $r9
+	move.d  [$r9+TI_task], $r10
+	move.d  [$r10+TASK_pid], $r10	; current->pid as arg1.
+	moveq	5, $r11			; SIGTRAP as arg2.
+	jsr	sys_kill
+	jump	ret_from_intr		; Use the return routine for interrupts.
+
+gdb_handle_breakpoint:
+	push	$dccr
+	push	$r0
+#ifdef CONFIG_ETRAX_KGDB
+	move	$dccr, $r0		; U-flag not affected by previous insns.
+	btstq	8, $r0			; Test the U-flag.
+	bmi	_ugdb_handle_breakpoint	; Go to user mode debugging.
+	nop				; Empty delay slot (cannot pop r0 here).
+	pop	$r0			; Restore r0.
+	ba	kgdb_handle_breakpoint	; Go to kernel debugging.
+	pop	$dccr			; Restore dccr in delay slot.
+#endif
+
+_ugdb_handle_breakpoint:
+	move	$brp, $r0		; Use r0 temporarily for calculation.
+	subq	2, $r0			; Set to address of previous instruction.
+	move	$r0, $brp
+	pop	$r0			; Restore r0.
+	ba	do_sigtrap		; SIGTRAP the offending process.
+	pop	$dccr			; Restore dccr in delay slot.
+
+	.data
+
+hw_bp_trigs:
+	.space 64*4
+hw_bp_trig_ptr:
+	.dword hw_bp_trigs
+
+	.section .rodata,"a"
+sys_call_table:
+	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink	/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid	/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35  old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount	/* recycled never used phys( */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall	/* old sys_olduname holder */
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp	/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long sys_select	/* was old_select in Linux/E100 */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink	/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long sys_old_readdir
+	.long sys_old_mmap	/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16	/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs	/* 100 */
+	.long sys_ni_syscall	/* sys_ioperm in i386 */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_ni_syscall	/* old sys_uname holder */
+	.long sys_ni_syscall	/* 110 */ /* sys_iopl in i386 */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* old "idle" system call */
+	.long sys_ni_syscall	/* vm86old in i386 */
+	.long sys_wait4
+	.long sys_swapoff	/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_adjtimex
+	.long sys_mprotect	/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* 130:	old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek	/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam	/* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min	/* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_ni_syscall	/* sys_vm86 */
+	.long sys_ni_syscall	/* Old sys_query_module */
+	.long sys_poll
+	.long sys_ni_syscall    /* old nfsservctl */
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64	/* 180 */
+	.long sys_pwrite64
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset	/* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* streams1 */
+	.long sys_ni_syscall	/* streams2 */
+	.long sys_vfork		/* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2		/* mmap_pgoff */
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64	/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid	/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid	/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall	/* sys_set_thread_area */
+	.long sys_ni_syscall	/* sys_get_thread_area */
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+	.long sys_remap_file_pages
+	.long sys_set_tid_address
+	.long sys_timer_create
+	.long sys_timer_settime		/* 260 */
+	.long sys_timer_gettime
+	.long sys_timer_getoverrun
+	.long sys_timer_delete
+	.long sys_clock_settime
+	.long sys_clock_gettime		/* 265 */
+	.long sys_clock_getres
+	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill		/* 270 */
+	.long sys_utimes
+	.long sys_fadvise64_64
+	.long sys_ni_syscall	/* sys_vserver */
+	.long sys_ni_syscall	/* sys_mbind */
+	.long sys_ni_syscall	/* 275 sys_get_mempolicy */
+	.long sys_ni_syscall	/* sys_set_mempolicy */
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive	/* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_ni_syscall
+	.long sys_waitid
+	.long sys_ni_syscall		/* 285 */ /* available */
+	.long sys_add_key
+	.long sys_request_key
+	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get		/* 290 */
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare		/* 310 */
+	.long sys_set_robust_list
+	.long sys_get_robust_list
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
+	.long sys_move_pages
+	.long sys_getcpu
+	.long sys_epoll_pwait
+	.long sys_utimensat		/* 320 */
+	.long sys_signalfd
+	.long sys_timerfd_create
+	.long sys_eventfd
+	.long sys_fallocate
+	.long sys_timerfd_settime	/* 325 */
+	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
+	.long sys_setns			/* 335 */
+	.long sys_name_to_handle_at
+	.long sys_open_by_handle_at
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_event_open
+	.long sys_recvmmsg		/* 340 */
+	.long sys_accept4
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
+	.long sys_clock_adjtime		/* 345 */
+	.long sys_syncfs
+	.long sys_sendmmsg
+	.long sys_process_vm_readv
+	.long sys_process_vm_writev
+	.long sys_kcmp			/* 350 */
+	.long sys_finit_module
+
+        /*
+         * NOTE!! This doesn't have to be exact - we just have
+         * to make sure we have _enough_ of the "sys_ni_syscall"
+         * entries. Don't panic if you notice that this hasn't
+         * been shrunk every time we add a new system call.
+         */
+
+	.rept NR_syscalls-(.-sys_call_table)/4
+		.long sys_ni_syscall
+	.endr
+
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
new file mode 100644
index 000000000..e9298739d
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -0,0 +1,834 @@
+/*
+ * linux/arch/cris/kernel/fasttimer.c
+ *
+ * Fast timers for ETRAX100/ETRAX100LX
+ *
+ * Copyright (C) 2000-2007 Axis Communications AB, Lund, Sweden
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+
+#include <arch/svinto.h>
+#include <asm/fasttimer.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+
+#define DEBUG_LOG_INCLUDED
+#define FAST_TIMER_LOG
+/* #define FAST_TIMER_TEST */
+
+#define FAST_TIMER_SANITY_CHECKS
+
+#ifdef FAST_TIMER_SANITY_CHECKS
+static int sanity_failed;
+#endif
+
+#define D1(x)
+#define D2(x)
+#define DP(x)
+
+static unsigned int fast_timer_running;
+static unsigned int fast_timers_added;
+static unsigned int fast_timers_started;
+static unsigned int fast_timers_expired;
+static unsigned int fast_timers_deleted;
+static unsigned int fast_timer_is_init;
+static unsigned int fast_timer_ints;
+
+struct fast_timer *fast_timer_list = NULL;
+
+#ifdef DEBUG_LOG_INCLUDED
+#define DEBUG_LOG_MAX 128
+static const char * debug_log_string[DEBUG_LOG_MAX];
+static unsigned long debug_log_value[DEBUG_LOG_MAX];
+static unsigned int debug_log_cnt;
+static unsigned int debug_log_cnt_wrapped;
+
+#define DEBUG_LOG(string, value) \
+{ \
+  unsigned long log_flags; \
+  local_irq_save(log_flags); \
+  debug_log_string[debug_log_cnt] = (string); \
+  debug_log_value[debug_log_cnt] = (unsigned long)(value); \
+  if (++debug_log_cnt >= DEBUG_LOG_MAX) \
+  { \
+    debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
+    debug_log_cnt_wrapped = 1; \
+  } \
+  local_irq_restore(log_flags); \
+}
+#else
+#define DEBUG_LOG(string, value)
+#endif
+
+
+/* The frequencies for index = clkselx number in R_TIMER_CTRL */
+#define NUM_TIMER_FREQ 15
+#define MAX_USABLE_TIMER_FREQ 7
+#define MAX_DELAY_US  853333L
+const unsigned long timer_freq_100[NUM_TIMER_FREQ] =
+{
+  3,   /* 0 3333 - 853333 us */
+  6,   /* 1 1666 - 426666 us */
+  12,  /* 2  833 - 213333 us */
+  24,  /* 3  416 - 106666 us */
+  48,  /* 4  208 -  53333 us */
+  96,  /* 5  104 -  26666 us */
+  192, /* 6   52 -  13333 us */
+  384, /* 7   26 -   6666 us */
+  576,
+  1152,
+  2304,
+  4608,
+  9216,
+  18432,
+  62500,
+  /* 15 = cascade */
+};
+#define NUM_TIMER_STATS 16
+#ifdef FAST_TIMER_LOG
+struct fast_timer timer_added_log[NUM_TIMER_STATS];
+struct fast_timer timer_started_log[NUM_TIMER_STATS];
+struct fast_timer timer_expired_log[NUM_TIMER_STATS];
+#endif
+
+int timer_div_settings[NUM_TIMER_STATS];
+int timer_freq_settings[NUM_TIMER_STATS];
+int timer_delay_settings[NUM_TIMER_STATS];
+
+/* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
+inline void do_gettimeofday_fast(struct fasttime_t *tv)
+{
+	tv->tv_jiff = jiffies;
+	tv->tv_usec = GET_JIFFIES_USEC();
+}
+
+inline int fasttime_cmp(struct fasttime_t *t0, struct fasttime_t *t1)
+{
+	/* Compare jiffies. Takes care of wrapping */
+	if (time_before(t0->tv_jiff, t1->tv_jiff))
+		return -1;
+	else if (time_after(t0->tv_jiff, t1->tv_jiff))
+		return 1;
+
+	/* Compare us */
+	if (t0->tv_usec < t1->tv_usec)
+		return -1;
+	else if (t0->tv_usec > t1->tv_usec)
+		return 1;
+	return 0;
+}
+
+inline void start_timer1(unsigned long delay_us)
+{
+  int freq_index = 0; /* This is the lowest resolution */
+  unsigned long upper_limit = MAX_DELAY_US;
+
+  unsigned long div;
+  /* Start/Restart the timer to the new shorter value */
+  /* t = 1/freq = 1/19200 = 53us
+   * T=div*t,  div = T/t = delay_us*freq/1000000
+   */
+#if 1 /* Adaptive timer settings */
+  while (delay_us < upper_limit && freq_index < MAX_USABLE_TIMER_FREQ)
+  {
+    freq_index++;
+    upper_limit >>= 1; /* Divide by 2 using shift */
+  }
+  if (freq_index > 0)
+  {
+    freq_index--;
+  }
+#else
+  freq_index = 6;
+#endif
+  div = delay_us * timer_freq_100[freq_index]/10000;
+  if (div < 2)
+  {
+    /* Maybe increase timer freq? */
+    div = 2;
+  }
+  if (div > 255)
+  {
+    div = 0; /* This means 256, the max the timer takes */
+    /* If a longer timeout than the timer can handle is used,
+     * then we must restart it when it goes off.
+     */
+  }
+
+  timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = div;
+  timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index;
+  timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
+
+	D1(printk(KERN_DEBUG "start_timer1 : %d us freq: %i div: %i\n",
+            delay_us, freq_index, div));
+  /* Clear timer1 irq */
+  *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
+
+  /* Set timer values */
+  *R_TIMER_CTRL = r_timer_ctrl_shadow =
+    (r_timer_ctrl_shadow &
+     ~IO_MASK(R_TIMER_CTRL, timerdiv1) &
+     ~IO_MASK(R_TIMER_CTRL, tm1) &
+     ~IO_MASK(R_TIMER_CTRL, clksel1)) |
+    IO_FIELD(R_TIMER_CTRL, timerdiv1, div) |
+    IO_STATE(R_TIMER_CTRL, tm1, stop_ld) |
+    IO_FIELD(R_TIMER_CTRL, clksel1, freq_index ); /* 6=c19k2Hz */
+
+  /* Ack interrupt */
+  *R_TIMER_CTRL =  r_timer_ctrl_shadow |
+    IO_STATE(R_TIMER_CTRL, i1, clr);
+
+  /* Start timer */
+  *R_TIMER_CTRL = r_timer_ctrl_shadow =
+    (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) |
+    IO_STATE(R_TIMER_CTRL, tm1, run);
+
+  /* Enable timer1 irq */
+  *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer1, set);
+  fast_timers_started++;
+  fast_timer_running = 1;
+}
+
+/* In version 1.4 this function takes 27 - 50 us */
+void start_one_shot_timer(struct fast_timer *t,
+                          fast_timer_function_type *function,
+                          unsigned long data,
+                          unsigned long delay_us,
+                          const char *name)
+{
+  unsigned long flags;
+  struct fast_timer *tmp;
+
+  D1(printk("sft %s %d us\n", name, delay_us));
+
+  local_irq_save(flags);
+
+  do_gettimeofday_fast(&t->tv_set);
+  tmp = fast_timer_list;
+
+#ifdef FAST_TIMER_SANITY_CHECKS
+	/* Check so this is not in the list already... */
+	while (tmp != NULL) {
+		if (tmp == t) {
+			printk(KERN_WARNING "timer name: %s data: "
+				"0x%08lX already in list!\n", name, data);
+			sanity_failed++;
+			goto done;
+		} else
+			tmp = tmp->next;
+	}
+	tmp = fast_timer_list;
+#endif
+
+  t->delay_us = delay_us;
+  t->function = function;
+  t->data = data;
+  t->name = name;
+
+  t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
+	t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ;
+  if (t->tv_expires.tv_usec > 1000000)
+  {
+    t->tv_expires.tv_usec -= 1000000;
+		t->tv_expires.tv_jiff += HZ;
+  }
+#ifdef FAST_TIMER_LOG
+  timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
+#endif
+  fast_timers_added++;
+
+  /* Check if this should timeout before anything else */
+	if (tmp == NULL || fasttime_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
+  {
+    /* Put first in list and modify the timer value */
+    t->prev = NULL;
+    t->next = fast_timer_list;
+    if (fast_timer_list)
+    {
+      fast_timer_list->prev = t;
+    }
+    fast_timer_list = t;
+#ifdef FAST_TIMER_LOG
+    timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+    start_timer1(delay_us);
+  } else {
+    /* Put in correct place in list */
+		while (tmp->next && fasttime_cmp(&t->tv_expires,
+				&tmp->next->tv_expires) > 0)
+    {
+      tmp = tmp->next;
+    }
+    /* Insert t after tmp */
+    t->prev = tmp;
+    t->next = tmp->next;
+    if (tmp->next)
+    {
+      tmp->next->prev = t;
+    }
+    tmp->next = t;
+  }
+
+  D2(printk("start_one_shot_timer: %d us done\n", delay_us));
+
+done:
+  local_irq_restore(flags);
+} /* start_one_shot_timer */
+
+static inline int fast_timer_pending (const struct fast_timer * t)
+{
+  return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list);
+}
+
+static inline int detach_fast_timer (struct fast_timer *t)
+{
+  struct fast_timer *next, *prev;
+  if (!fast_timer_pending(t))
+    return 0;
+  next = t->next;
+  prev = t->prev;
+  if (next)
+    next->prev = prev;
+  if (prev)
+    prev->next = next;
+  else
+    fast_timer_list = next;
+  fast_timers_deleted++;
+  return 1;
+}
+
+int del_fast_timer(struct fast_timer * t)
+{
+  unsigned long flags;
+  int ret;
+  
+  local_irq_save(flags);
+  ret = detach_fast_timer(t);
+  t->next = t->prev = NULL;
+  local_irq_restore(flags);
+  return ret;
+} /* del_fast_timer */
+
+
+/* Interrupt routines or functions called in interrupt context */
+
+/* Timer 1 interrupt handler */
+
+static irqreturn_t
+timer1_handler(int irq, void *dev_id)
+{
+  struct fast_timer *t;
+  unsigned long flags;
+
+	/* We keep interrupts disabled not only when we modify the
+	 * fast timer list, but any time we hold a reference to a
+	 * timer in the list, since del_fast_timer may be called
+	 * from (another) interrupt context.  Thus, the only time
+	 * when interrupts are enabled is when calling the timer
+	 * callback function.
+	 */
+  local_irq_save(flags);
+
+  /* Clear timer1 irq */
+  *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
+
+  /* First stop timer, then ack interrupt */
+  /* Stop timer */
+  *R_TIMER_CTRL = r_timer_ctrl_shadow =
+    (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) |
+    IO_STATE(R_TIMER_CTRL, tm1, stop_ld);
+
+  /* Ack interrupt */
+  *R_TIMER_CTRL =  r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i1, clr);
+
+  fast_timer_running = 0;
+  fast_timer_ints++;
+
+  t = fast_timer_list;
+  while (t)
+  {
+		struct fasttime_t tv;
+		fast_timer_function_type *f;
+		unsigned long d;
+
+    /* Has it really expired? */
+    do_gettimeofday_fast(&tv);
+		D1(printk(KERN_DEBUG "t: %is %06ius\n",
+			tv.tv_jiff, tv.tv_usec));
+
+		if (fasttime_cmp(&t->tv_expires, &tv) <= 0)
+    {
+      /* Yes it has expired */
+#ifdef FAST_TIMER_LOG
+      timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t;
+#endif
+      fast_timers_expired++;
+
+      /* Remove this timer before call, since it may reuse the timer */
+      if (t->prev)
+      {
+        t->prev->next = t->next;
+      }
+      else
+      {
+        fast_timer_list = t->next;
+      }
+      if (t->next)
+      {
+        t->next->prev = t->prev;
+      }
+      t->prev = NULL;
+      t->next = NULL;
+
+			/* Save function callback data before enabling
+			 * interrupts, since the timer may be removed and
+			 * we don't know how it was allocated
+			 * (e.g. ->function and ->data may become overwritten
+			 * after deletion if the timer was stack-allocated).
+			 */
+			f = t->function;
+			d = t->data;
+
+			if (f != NULL) {
+				/* Run callback with interrupts enabled. */
+				local_irq_restore(flags);
+				f(d);
+				local_irq_save(flags);
+			} else
+        DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints);
+    }
+    else
+    {
+      /* Timer is to early, let's set it again using the normal routines */
+      D1(printk(".\n"));
+    }
+
+    if ((t = fast_timer_list) != NULL)
+    {
+      /* Start next timer.. */
+			long us = 0;
+			struct fasttime_t tv;
+
+      do_gettimeofday_fast(&tv);
+
+			/* time_after_eq takes care of wrapping */
+			if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff))
+				us = ((t->tv_expires.tv_jiff - tv.tv_jiff) *
+					1000000 / HZ + t->tv_expires.tv_usec -
+					tv.tv_usec);
+
+      if (us > 0)
+      {
+        if (!fast_timer_running)
+        {
+#ifdef FAST_TIMER_LOG
+          timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+          start_timer1(us);
+        }
+        break;
+      }
+      else
+      {
+        /* Timer already expired, let's handle it better late than never.
+         * The normal loop handles it
+         */
+        D1(printk("e! %d\n", us));
+      }
+    }
+  }
+
+	local_irq_restore(flags);
+
+  if (!t)
+  {
+    D1(printk("t1 stop!\n"));
+  }
+
+  return IRQ_HANDLED;
+}
+
+static void wake_up_func(unsigned long data)
+{
+  wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data;
+  wake_up(sleep_wait_p);
+}
+
+
+/* Useful API */
+
+void schedule_usleep(unsigned long us)
+{
+  struct fast_timer t;
+  wait_queue_head_t sleep_wait;
+  init_waitqueue_head(&sleep_wait);
+
+  D1(printk("schedule_usleep(%d)\n", us));
+  start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
+                       "usleep");
+	/* Uninterruptible sleep on the fast timer. (The condition is somewhat
+	 * redundant since the timer is what wakes us up.) */
+	wait_event(sleep_wait, !fast_timer_pending(&t));
+
+  D1(printk("done schedule_usleep(%d)\n", us));
+}
+
+#ifdef CONFIG_PROC_FS
+/* This value is very much based on testing */
+#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300)
+
+static int proc_fasttimer_show(struct seq_file *m, void *v)
+{
+	unsigned long flags;
+	int i = 0;
+	int num_to_show;
+	struct fasttime_t tv;
+	struct fast_timer *t, *nextt;
+
+	do_gettimeofday_fast(&tv);
+
+	seq_printf(m, "Fast timers added:     %i\n", fast_timers_added);
+	seq_printf(m, "Fast timers started:   %i\n", fast_timers_started);
+	seq_printf(m, "Fast timer interrupts: %i\n", fast_timer_ints);
+	seq_printf(m, "Fast timers expired:   %i\n", fast_timers_expired);
+	seq_printf(m, "Fast timers deleted:   %i\n", fast_timers_deleted);
+	seq_printf(m, "Fast timer running:    %s\n",
+		   fast_timer_running ? "yes" : "no");
+	seq_printf(m, "Current time:          %lu.%06lu\n",
+		   (unsigned long)tv.tv_jiff,
+		   (unsigned long)tv.tv_usec);
+#ifdef FAST_TIMER_SANITY_CHECKS
+	seq_printf(m, "Sanity failed:         %i\n", sanity_failed);
+#endif
+	seq_putc(m, '\n');
+
+#ifdef DEBUG_LOG_INCLUDED
+	{
+		int end_i = debug_log_cnt;
+		i = 0;
+
+		if (debug_log_cnt_wrapped)
+			i = debug_log_cnt;
+
+		while (i != end_i || debug_log_cnt_wrapped) {
+			seq_printf(m, debug_log_string[i], debug_log_value[i]);
+			if (seq_has_overflowed(m))
+				return 0;
+			i = (i+1) % DEBUG_LOG_MAX;
+		}
+	}
+	seq_putc(m, '\n');
+#endif
+
+	num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started:
+		       NUM_TIMER_STATS);
+	seq_printf(m, "Timers started: %i\n", fast_timers_started);
+	for (i = 0; i < num_to_show; i++) {
+		int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS;
+
+#if 1 //ndef FAST_TIMER_LOG
+		seq_printf(m, "div: %i freq: %i delay: %i\n",
+			   timer_div_settings[cur],
+			   timer_freq_settings[cur],
+			   timer_delay_settings[cur]);
+#endif
+#ifdef FAST_TIMER_LOG
+		t = &timer_started_log[cur];
+		seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n",
+			   t->name,
+			   (unsigned long)t->tv_set.tv_jiff,
+			   (unsigned long)t->tv_set.tv_usec,
+			   (unsigned long)t->tv_expires.tv_jiff,
+			   (unsigned long)t->tv_expires.tv_usec,
+			   t->delay_us,
+			   t->data);
+		if (seq_has_overflowed(m))
+			return 0;
+#endif
+	}
+	seq_putc(m, '\n');
+
+#ifdef FAST_TIMER_LOG
+	num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added:
+		       NUM_TIMER_STATS);
+	seq_printf(m, "Timers added: %i\n", fast_timers_added);
+	for (i = 0; i < num_to_show; i++) {
+		t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS];
+		seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n",
+			   t->name,
+			   (unsigned long)t->tv_set.tv_jiff,
+			   (unsigned long)t->tv_set.tv_usec,
+			   (unsigned long)t->tv_expires.tv_jiff,
+			   (unsigned long)t->tv_expires.tv_usec,
+			   t->delay_us,
+			   t->data);
+		if (seq_has_overflowed(m))
+			return 0;
+	}
+	seq_putc(m, '\n');
+
+	num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired:
+		       NUM_TIMER_STATS);
+	seq_printf(m, "Timers expired: %i\n", fast_timers_expired);
+	for (i = 0; i < num_to_show; i++) {
+		t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS];
+		seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n",
+			   t->name,
+			   (unsigned long)t->tv_set.tv_jiff,
+			   (unsigned long)t->tv_set.tv_usec,
+			   (unsigned long)t->tv_expires.tv_jiff,
+			   (unsigned long)t->tv_expires.tv_usec,
+			   t->delay_us,
+			   t->data);
+		if (seq_has_overflowed(m))
+			return 0;
+	}
+	seq_putc(m, '\n');
+#endif
+
+	seq_puts(m, "Active timers:\n");
+	local_irq_save(flags);
+	t = fast_timer_list;
+	while (t) {
+		nextt = t->next;
+		local_irq_restore(flags);
+		seq_printf(m, "%-14s s: %6lu.%06lu e: %6lu.%06lu d: %6li us data: 0x%08lX\n",
+			   t->name,
+			   (unsigned long)t->tv_set.tv_jiff,
+			   (unsigned long)t->tv_set.tv_usec,
+			   (unsigned long)t->tv_expires.tv_jiff,
+			   (unsigned long)t->tv_expires.tv_usec,
+			   t->delay_us,
+			   t->data);
+		if (seq_has_overflowed(m))
+			return 0;
+		local_irq_save(flags);
+		if (t->next != nextt)
+			printk(KERN_WARNING "timer removed!\n");
+		t = nextt;
+	}
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int proc_fasttimer_open(struct inode *inode, struct file *file)
+{
+	return single_open_size(file, proc_fasttimer_show, PDE_DATA(inode), BIG_BUF_SIZE);
+}
+
+static const struct file_operations proc_fasttimer_fops = {
+	.open		= proc_fasttimer_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+#endif /* PROC_FS */
+
+#ifdef FAST_TIMER_TEST
+static volatile unsigned long i = 0;
+static volatile int num_test_timeout = 0;
+static struct fast_timer tr[10];
+static int exp_num[10];
+
+static struct fasttime_t tv_exp[100];
+
+static void test_timeout(unsigned long data)
+{
+  do_gettimeofday_fast(&tv_exp[data]);
+  exp_num[data] = num_test_timeout;
+
+  num_test_timeout++;
+}
+
+static void test_timeout1(unsigned long data)
+{
+  do_gettimeofday_fast(&tv_exp[data]);
+  exp_num[data] = num_test_timeout;
+  if (data < 7)
+  {
+    start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1");
+    i++;
+  }
+  num_test_timeout++;
+}
+
+DP(
+static char buf0[2000];
+static char buf1[2000];
+static char buf2[2000];
+static char buf3[2000];
+static char buf4[2000];
+);
+
+static char buf5[6000];
+static int j_u[1000];
+
+static void fast_timer_test(void)
+{
+  int prev_num;
+  int j;
+
+	struct fasttime_t tv, tv0, tv1, tv2;
+
+  printk("fast_timer_test() start\n");
+  do_gettimeofday_fast(&tv);
+
+  for (j = 0; j < 1000; j++)
+  {
+    j_u[j] = GET_JIFFIES_USEC();
+  }
+  for (j = 0; j < 100; j++)
+  {
+    do_gettimeofday_fast(&tv_exp[j]);
+  }
+	printk(KERN_DEBUG "fast_timer_test() %is %06i\n",
+		tv.tv_jiff, tv.tv_usec);
+
+  for (j = 0; j < 1000; j++)
+  {
+    printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]);
+    j += 4;
+  }
+  for (j = 0; j < 100; j++)
+  {
+		printk(KERN_DEBUG "%i.%i %i.%i %i.%i %i.%i %i.%i\n",
+			tv_exp[j].tv_jiff, tv_exp[j].tv_usec,
+			tv_exp[j+1].tv_jiff, tv_exp[j+1].tv_usec,
+			tv_exp[j+2].tv_jiff, tv_exp[j+2].tv_usec,
+			tv_exp[j+3].tv_jiff, tv_exp[j+3].tv_usec,
+			tv_exp[j+4].tv_jiff, tv_exp[j+4].tv_usec);
+    j += 4;
+  }
+  do_gettimeofday_fast(&tv0);
+  start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0");
+  DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1");
+  DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2");
+  DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3");
+  DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx");
+  DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0));
+  i++;
+  do_gettimeofday_fast(&tv1);
+
+  proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+
+  prev_num = num_test_timeout;
+  while (num_test_timeout < i)
+  {
+    if (num_test_timeout != prev_num)
+    {
+      prev_num = num_test_timeout;
+    }
+  }
+  do_gettimeofday_fast(&tv2);
+	printk(KERN_DEBUG "Timers started    %is %06i\n",
+		tv0.tv_jiff, tv0.tv_usec);
+	printk(KERN_DEBUG "Timers started at %is %06i\n",
+		tv1.tv_jiff, tv1.tv_usec);
+	printk(KERN_DEBUG "Timers done       %is %06i\n",
+		tv2.tv_jiff, tv2.tv_usec);
+  DP(printk("buf0:\n");
+     printk(buf0);
+     printk("buf1:\n");
+     printk(buf1);
+     printk("buf2:\n");
+     printk(buf2);
+     printk("buf3:\n");
+     printk(buf3);
+     printk("buf4:\n");
+     printk(buf4);
+  );
+  printk("buf5:\n");
+  printk(buf5);
+
+  printk("timers set:\n");
+  for(j = 0; j<i; j++)
+  {
+    struct fast_timer *t = &tr[j];
+    printk("%-10s set: %6is %06ius exp: %6is %06ius "
+           "data: 0x%08X func: 0x%08X\n",
+           t->name,
+			t->tv_set.tv_jiff,
+           t->tv_set.tv_usec,
+			t->tv_expires.tv_jiff,
+           t->tv_expires.tv_usec,
+           t->data,
+           t->function
+           );
+
+    printk("           del: %6ius     did exp: %6is %06ius as #%i error: %6li\n",
+           t->delay_us,
+			tv_exp[j].tv_jiff,
+           tv_exp[j].tv_usec,
+           exp_num[j],
+			(tv_exp[j].tv_jiff - t->tv_expires.tv_jiff) *
+				1000000 + tv_exp[j].tv_usec -
+				t->tv_expires.tv_usec);
+  }
+  proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+  printk("buf5 after all done:\n");
+  printk(buf5);
+  printk("fast_timer_test() done\n");
+}
+#endif
+
+
+int fast_timer_init(void)
+{
+  /* For some reason, request_irq() hangs when called froom time_init() */
+  if (!fast_timer_is_init)
+  {
+#if 0 && defined(FAST_TIMER_TEST)
+    int i;
+#endif
+
+    printk(KERN_INFO "fast_timer_init()\n");
+
+#if 0 && defined(FAST_TIMER_TEST)
+    for (i = 0; i <= TIMER0_DIV; i++)
+    {
+      /* We must be careful not to get overflow... */
+      printk("%3i %6u\n", i, timer0_value_us[i]);
+    }
+#endif
+#ifdef CONFIG_PROC_FS
+   proc_create("fasttimer", 0, NULL, &proc_fasttimer_fops);
+#endif /* PROC_FS */
+    if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0,
+                   "fast timer int", NULL))
+    {
+      printk("err: timer1 irq\n");
+    }
+    fast_timer_is_init = 1;
+#ifdef FAST_TIMER_TEST
+    printk("do test\n");
+    fast_timer_test();
+#endif
+  }
+	return 0;
+}
+__initcall(fast_timer_init);
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
new file mode 100644
index 000000000..4a146e174
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -0,0 +1,723 @@
+/*
+ * Head of the kernel - alter with care
+ *
+ * Copyright (C) 2000, 2001, 2010 Axis Communications AB
+ *
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+/* The IO_* macros use the ## token concatenation operator, so
+   -traditional must not be used when assembling this file.  */
+#include <arch/sv_addr_ag.h>
+
+#define CRAMFS_MAGIC 0x28cd3d45
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+#define START_ETHERNET_CLOCK IO_STATE(R_NETWORK_GEN_CONFIG, enable, on) |\
+                             IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk)
+
+	;; exported symbols
+
+	.globl	etrax_irv
+	.globl	romfs_start
+	.globl	romfs_length
+	.globl	romfs_in_flash
+	.globl  swapper_pg_dir
+
+	.text
+
+	;; This is the entry point of the kernel. We are in supervisor mode.
+	;; 0x00000000 if Flash, 0x40004000 if DRAM
+	;; since etrax actually starts at address 2 when booting from flash, we
+	;; put a nop (2 bytes) here first so we dont accidentally skip the di
+	;;
+	;; NOTICE! The registers r8 and r9 are used as parameters carrying
+	;; information from the decompressor (if the kernel was compressed).
+	;; They should not be used in the code below until read.
+
+	nop
+	di
+
+	;; First setup the kseg_c mapping from where the kernel is linked
+	;; to 0x40000000 (where the actual DRAM resides) otherwise
+	;; we cannot do very much! See arch/cris/README.mm
+	;;
+	;; Notice that since we're potentially running at 0x00 or 0x40 right now,
+	;; we will get a fault as soon as we enable the MMU if we dont
+	;; temporarily map those segments linearily.
+	;;
+	;; Due to a bug in Etrax-100 LX version 1 we need to map the memory
+	;; slightly different.  The bug is that you can't remap bit 31 of
+	;; an address.  Though we can check the version register for
+	;; whether the bug is present, some constants would then have to
+	;; be variables, so we don't.  The drawback is that you can "only" map
+	;; 1G per process with CONFIG_CRIS_LOW_MAP.
+
+#ifdef CONFIG_CRIS_LOW_MAP
+	; kseg mappings, temporary map of 0xc0->0x40
+	move.d	  IO_FIELD (R_MMU_KBASE_HI, base_c, 4)		\
+		| IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb)	\
+		| IO_FIELD (R_MMU_KBASE_HI, base_9, 9)		\
+		| IO_FIELD (R_MMU_KBASE_HI, base_8, 8), $r0
+	move.d	$r0, [R_MMU_KBASE_HI]
+
+	; temporary map of 0x40->0x40 and 0x60->0x40
+	move.d	  IO_FIELD (R_MMU_KBASE_LO, base_6, 4)		\
+		| IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0
+	move.d	$r0, [R_MMU_KBASE_LO]
+
+	; mmu enable, segs e,c,b,a,6,5,4,0 segment mapped
+	move.d	  IO_STATE (R_MMU_CONFIG, mmu_enable, enable)	\
+		| IO_STATE (R_MMU_CONFIG, inv_excp, enable)	\
+		| IO_STATE (R_MMU_CONFIG, acc_excp, enable)	\
+		| IO_STATE (R_MMU_CONFIG, we_excp, enable)	\
+		| IO_STATE (R_MMU_CONFIG, seg_f, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_e, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_d, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_c, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_b, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_a, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_9, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_8, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_7, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_6, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_5, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_4, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_3, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_2, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_1, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_0, seg), $r0
+	move.d	$r0, [R_MMU_CONFIG]
+#else
+	; kseg mappings
+	move.d	  IO_FIELD (R_MMU_KBASE_HI, base_e, 8)		\
+		| IO_FIELD (R_MMU_KBASE_HI, base_c, 4)		\
+		| IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb), $r0
+	move.d	$r0, [R_MMU_KBASE_HI]
+
+	; temporary map of 0x40->0x40 and 0x00->0x00
+	move.d	  IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0
+	move.d	$r0, [R_MMU_KBASE_LO]
+
+	; mmu enable, segs f,e,c,b,4,0 segment mapped
+	move.d	  IO_STATE (R_MMU_CONFIG, mmu_enable, enable)	\
+		| IO_STATE (R_MMU_CONFIG, inv_excp, enable)	\
+		| IO_STATE (R_MMU_CONFIG, acc_excp, enable)	\
+		| IO_STATE (R_MMU_CONFIG, we_excp, enable)	\
+		| IO_STATE (R_MMU_CONFIG, seg_f, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_e, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_d, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_c, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_b, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_a, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_9, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_8, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_7, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_6, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_5, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_4, seg)		\
+		| IO_STATE (R_MMU_CONFIG, seg_3, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_2, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_1, page)		\
+		| IO_STATE (R_MMU_CONFIG, seg_0, seg), $r0
+	move.d	$r0, [R_MMU_CONFIG]
+#endif
+
+	;; Now we need to sort out the segments and their locations in RAM or
+	;; Flash. The image in the Flash (or in DRAM) consists of 3 pieces:
+	;; 1) kernel text, 2) kernel data, 3) ROM filesystem image
+	;; But the linker has linked the kernel to expect this layout in
+	;; DRAM memory:
+	;; 1) kernel text, 2) kernel data, 3) kernel BSS
+	;; (the location of the ROM filesystem is determined by the krom driver)
+	;; If we boot this from Flash, we want to keep the ROM filesystem in
+	;; the flash, we want to copy the text and need to copy the data to DRAM.
+	;; But if we boot from DRAM, we need to move the ROMFS image
+	;; from its position after kernel data, to after kernel BSS, BEFORE the
+	;; kernel starts using the BSS area (since its "overlayed" with the ROMFS)
+	;;
+	;; In both cases, we start in un-cached mode, and need to jump into a
+	;; cached PC after we're done fiddling around with the segments.
+	;;
+	;; arch/etrax100/etrax100.ld sets some symbols that define the start
+	;; and end of each segment.
+
+	;; Check if we start from DRAM or FLASH by testing PC
+
+	move.d	$pc,$r0
+	and.d	0x7fffffff,$r0	; get rid of the non-cache bit
+	cmp.d	0x10000,$r0	; arbitrary... just something above this code
+	blo	_inflash0
+	nop
+
+	jump	_inram		; enter cached ram
+
+	;; Jumpgate for branches.
+_inflash0:
+	jump	_inflash
+
+	;; Put this in a suitable section where we can reclaim storage
+	;; after init.
+	.section ".init.text", "ax"
+_inflash:
+#ifdef CONFIG_ETRAX_ETHERNET
+	;; Start MII clock to make sure it is running when tranceiver is reset
+	move.d START_ETHERNET_CLOCK, $r0
+	move.d $r0, [R_NETWORK_GEN_CONFIG]
+#endif
+
+	;; Set up waitstates etc according to kernel configuration.
+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
+	move.d   $r0, [R_WAITSTATES]
+
+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
+	move.d   $r0, [R_BUS_CONFIG]
+
+	;; We need to initialze DRAM registers before we start using the DRAM
+
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
+	beq	_dram_init_finished
+	nop
+
+#include "../lib/dram_init.S"
+
+_dram_init_finished:
+	;; Copy text+data to DRAM
+	;; This is fragile - the calculation of r4 as the image size depends
+	;; on that the labels below actually are the first and last positions
+	;; in the linker-script.
+	;;
+	;; Then the locating of the cramfs image depends on the aforementioned
+	;; image being located in the flash at 0. This is most often not true,
+	;; thus the following does not work (normally there is a rescue-block
+	;; between the physical start of the flash and the flash-image start,
+	;; and when run with compression, the kernel is actually unpacked to
+	;; DRAM and we never get here in the first place :))
+
+	moveq	0, $r0			; source
+	move.d	text_start, $r1		; destination
+	move.d	__vmlinux_end, $r2	; end destination
+	move.d	$r2, $r4
+	sub.d	$r1, $r4		; r4=__vmlinux_end in flash, used below
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
+	blo	1b
+	nop
+
+	;; We keep the cramfs in the flash.
+	;; There might be none, but that does not matter because
+	;; we don't do anything than read some bytes here.
+
+	moveq	0, $r0
+	move.d	$r0, [romfs_length] ; default if there is no cramfs
+
+	move.d  [$r4], $r0	; cramfs_super.magic
+	cmp.d	CRAMFS_MAGIC, $r0
+	bne	1f
+	nop
+	move.d	[$r4 + 4], $r0	; cramfs_super.size
+	move.d	$r0, [romfs_length]
+#ifdef CONFIG_CRIS_LOW_MAP
+	add.d   0x50000000, $r4	; add flash start in virtual memory (cached)
+#else
+	add.d   0xf0000000, $r4	; add flash start in virtual memory (cached)
+#endif
+	move.d	$r4, [romfs_start]
+1:
+	moveq	1, $r0
+	move.d	$r0, [romfs_in_flash]
+
+	jump	_start_it	; enter code, cached this time
+
+_inram:
+	;; Move the ROM fs to after BSS end. This assumes that the cramfs
+	;; second longword contains the length of the cramfs
+
+	moveq	0, $r0
+	move.d	$r0, [romfs_length] ; default if there is no cramfs
+
+	;; The kernel could have been unpacked to DRAM by the loader, but
+	;; the cramfs image could still be in the Flash directly after the
+	;; compressed kernel image. The loader passes the address of the
+	;; byte succeeding the last compressed byte in the flash in the
+	;; register r9 when starting the kernel. Check if r9 points to a
+	;; decent cramfs image!
+	;; (Notice that if this is not booted from the loader, r9 will be
+	;;  garbage but we do sanity checks on it, the chance that it points
+	;;  to a cramfs magic is small.. )
+
+	cmp.d	0x0ffffff8, $r9
+	bhs	_no_romfs_in_flash	; r9 points outside the flash area
+	nop
+	move.d	[$r9], $r0	; cramfs_super.magic
+	cmp.d	CRAMFS_MAGIC, $r0
+	bne	_no_romfs_in_flash
+	nop
+	move.d	[$r9+4], $r0	; cramfs_super.length
+	move.d	$r0, [romfs_length]
+#ifdef CONFIG_CRIS_LOW_MAP
+	add.d   0x50000000, $r9	; add flash start in virtual memory (cached)
+#else
+	add.d   0xf0000000, $r9	; add flash start in virtual memory (cached)
+#endif
+	move.d	$r9, [romfs_start]
+
+	moveq	1, $r0
+	move.d	$r0, [romfs_in_flash]
+
+	jump	_start_it	; enter code, cached this time
+
+_no_romfs_in_flash:
+
+	;; Check if there is a cramfs (magic value).
+	;; Notice that we check for cramfs magic value - which is
+	;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does
+	;; not need this mechanism anyway)
+
+	move.d	__init_end, $r0; the image will be after the end of init
+	move.d	[$r0], $r1	; cramfs assumes same endian on host/target
+	cmp.d	CRAMFS_MAGIC, $r1; magic value in cramfs superblock
+	bne	2f
+	nop
+
+	;; Ok. What is its size ?
+
+	move.d	[$r0 + 4], $r2	; cramfs_super.size (again, no need to swapwb)
+
+	;; We want to copy it to the end of the BSS
+
+	move.d	_end, $r1
+
+	;; Remember values so cramfs and setup can find this info
+
+	move.d	$r1, [romfs_start]	; new romfs location
+	move.d	$r2, [romfs_length]
+
+	;; We need to copy it backwards, since they can be overlapping
+
+	add.d	$r2, $r0
+	add.d	$r2, $r1
+
+	;; Go ahead. Make my loop.
+
+	lsrq	1, $r2		; size is in bytes, we copy words
+
+1:	move.w	[$r0=$r0-2],$r3
+	move.w	$r3,[$r1=$r1-2]
+	subq	1, $r2
+	bne	1b
+	nop
+
+2:
+	;; Dont worry that the BSS is tainted. It will be cleared later.
+
+	moveq	0, $r0
+	move.d	$r0, [romfs_in_flash]
+
+	jump	_start_it	; better skip the additional cramfs check below
+
+_start_it:
+
+	;; Check if kernel command line is supplied
+	cmp.d	COMMAND_LINE_MAGIC, $r10
+	bne	no_command_line
+	nop
+
+	move.d	256, $r13
+	move.d  cris_command_line, $r10
+	or.d	0x80000000, $r11 ; Make it virtual
+1:
+	move.b  [$r11+], $r12
+	move.b  $r12, [$r10+]
+	subq	1, $r13
+	bne	1b
+	nop
+
+no_command_line:
+
+	;; the kernel stack is overlayed with the task structure for each
+	;; task. thus the initial kernel stack is in the same page as the
+	;; init_task (but starts in the top of the page, size 8192)
+	move.d	init_thread_union + 8192, $sp
+	move.d	ibr_start,$r0	; this symbol is set by the linker script 
+	move	$r0,$ibr
+	move.d	$r0,[etrax_irv]	; set the interrupt base register and pointer
+
+	;; Clear BSS region, from _bss_start to _end
+
+	move.d	__bss_start, $r0
+	move.d	_end, $r1
+1:	clear.d	[$r0+]
+	cmp.d	$r1, $r0
+	blo	1b
+	nop
+
+#ifdef CONFIG_BLK_DEV_ETRAXIDE
+	;; disable ATA before enabling it in genconfig below
+	moveq	0,$r0
+	move.d	$r0,[R_ATA_CTRL_DATA]
+	move.d	$r0,[R_ATA_TRANSFER_CNT]
+	move.d	$r0,[R_ATA_CONFIG]
+#if 0
+	move.d	R_PORT_G_DATA, $r1
+	move.d	$r0, [$r1]; assert ATA bus-reset
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	move.d	0x08000000,$r0
+	move.d	$r0,[$r1]
+#endif
+#endif
+
+#ifdef CONFIG_JULIETTE
+	;; configure external DMA channel 0 before enabling it in genconfig
+
+	moveq	0,$r0
+	move.d	$r0,[R_EXT_DMA_0_ADDR]
+	; cnt enable, word size, output, stop, size 0
+	move.d	  IO_STATE (R_EXT_DMA_0_CMD, cnt, enable)	\
+		| IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh)	\
+		| IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh)	\
+		| IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst)	\
+		| IO_STATE (R_EXT_DMA_0_CMD, wid, word)		\
+		| IO_STATE (R_EXT_DMA_0_CMD, dir, output)	\
+		| IO_STATE (R_EXT_DMA_0_CMD, run, stop)		\
+		| IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0
+	move.d	$r0,[R_EXT_DMA_0_CMD]
+
+	;; reset dma4 and wait for completion
+
+	moveq	IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
+	move.b	$r0,[R_DMA_CH4_CMD]
+1:	move.b	[R_DMA_CH4_CMD],$r0
+	and.b	IO_MASK (R_DMA_CH4_CMD, cmd),$r0
+	cmp.b	IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
+	beq	1b
+	nop
+
+	;; reset dma5 and wait for completion
+
+	moveq	IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
+	move.b	$r0,[R_DMA_CH5_CMD]
+1:	move.b	[R_DMA_CH5_CMD],$r0
+	and.b	IO_MASK (R_DMA_CH5_CMD, cmd),$r0
+	cmp.b	IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
+	beq	1b
+	nop
+#endif
+
+	;; Etrax product HW genconfig setup
+
+	moveq	0,$r0
+
+	;; Select or disable serial port 2
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	or.d	  IO_STATE (R_GEN_CONFIG, ser2, select),$r0
+#else
+	or.d	  IO_STATE (R_GEN_CONFIG, ser2, disable),$r0
+#endif
+
+	;; Init interfaces (disable them).
+	or.d	  IO_STATE (R_GEN_CONFIG, scsi0, disable) \
+		| IO_STATE (R_GEN_CONFIG, ata, disable) \
+		| IO_STATE (R_GEN_CONFIG, par0, disable) \
+		| IO_STATE (R_GEN_CONFIG, mio, disable) \
+		| IO_STATE (R_GEN_CONFIG, scsi1, disable) \
+		| IO_STATE (R_GEN_CONFIG, scsi0w, disable) \
+		| IO_STATE (R_GEN_CONFIG, par1, disable) \
+		| IO_STATE (R_GEN_CONFIG, ser3, disable) \
+		| IO_STATE (R_GEN_CONFIG, mio_w, disable) \
+		| IO_STATE (R_GEN_CONFIG, usb1, disable) \
+		| IO_STATE (R_GEN_CONFIG, usb2, disable) \
+		| IO_STATE (R_GEN_CONFIG, par_w, disable),$r0
+
+	;; Init DMA channel muxing (set to unused clients).
+	or.d	  IO_STATE (R_GEN_CONFIG, dma2, ata)	\
+		| IO_STATE (R_GEN_CONFIG, dma3, ata) \
+		| IO_STATE (R_GEN_CONFIG, dma4, scsi1) \
+		| IO_STATE (R_GEN_CONFIG, dma5, scsi1) \
+		| IO_STATE (R_GEN_CONFIG, dma6, unused) \
+		| IO_STATE (R_GEN_CONFIG, dma7, unused) \
+		| IO_STATE (R_GEN_CONFIG, dma8, usb) \
+		| IO_STATE (R_GEN_CONFIG, dma9, usb),$r0
+
+
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT)
+        or.d      IO_STATE (R_GEN_CONFIG, g0dir, out),$r0
+#endif
+
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT)
+        or.d      IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0
+#endif
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT)
+       or.d      IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0
+#endif
+
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT)
+       or.d      IO_STATE (R_GEN_CONFIG, g24dir, out),$r0
+#endif
+
+	move.d	$r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG
+
+	move.d	$r0,[R_GEN_CONFIG]
+
+#if 0
+	moveq	4,$r0
+	move.b	$r0,[R_DMA_CH6_CMD]	; reset (ser0 dma out)
+	move.b	$r0,[R_DMA_CH7_CMD]	; reset (ser0 dma in)
+1:	move.b	[R_DMA_CH6_CMD],$r0	; wait for reset cycle to finish
+	and.b	7,$r0
+	cmp.b	4,$r0
+	beq	1b
+	nop
+1:	move.b	[R_DMA_CH7_CMD],$r0	; wait for reset cycle to finish
+	and.b	7,$r0
+	cmp.b	4,$r0
+	beq	1b
+	nop
+#endif
+
+	moveq	IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0
+	move.b	$r0,[R_DMA_CH8_CMD]	; reset (ser1 dma out)
+	move.b	$r0,[R_DMA_CH9_CMD]	; reset (ser1 dma in)
+1:	move.b	[R_DMA_CH8_CMD],$r0	; wait for reset cycle to finish
+	andq	IO_MASK (R_DMA_CH8_CMD, cmd),$r0
+	cmpq	IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0
+	beq	1b
+	nop
+1:	move.b	[R_DMA_CH9_CMD],$r0	; wait for reset cycle to finish
+	andq	IO_MASK (R_DMA_CH9_CMD, cmd),$r0
+	cmpq	IO_STATE (R_DMA_CH9_CMD, cmd, reset),$r0
+	beq	1b
+	nop
+
+	;; setup port PA and PB default initial directions and data
+	;; including their shadow registers
+
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
+	or.b	IO_STATE (R_PORT_PA_DIR, dir7, output),$r0
+#endif
+	move.b	$r0,[port_pa_dir_shadow]
+	move.b	$r0,[R_PORT_PA_DIR]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+	and.b	~(1 << 7),$r0
+#else
+	or.b	(1 << 7),$r0
+#endif
+#endif
+	move.b	$r0,[port_pa_data_shadow]
+	move.b	$r0,[R_PORT_PA_DATA]
+
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG,$r0
+	move.b	$r0,[port_pb_config_shadow]
+	move.b	$r0,[R_PORT_PB_CONFIG]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
+	or.b	IO_STATE (R_PORT_PB_DIR, dir5, output),$r0
+#endif
+	move.b	$r0,[port_pb_dir_shadow]
+	move.b	$r0,[R_PORT_PB_DIR]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+	and.b	~(1 << 5),$r0
+#else
+	or.b	(1 << 5),$r0
+#endif
+#endif
+	move.b	$r0,[port_pb_data_shadow]
+	move.b	$r0,[R_PORT_PB_DATA]
+
+	moveq   0, $r0
+	move.d  $r0,[port_pb_i2c_shadow]
+	move.d  $r0, [R_PORT_PB_I2C]
+
+	moveq	0,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+	and.d	~(1 << 10),$r0
+#else
+	or.d	(1 << 10),$r0
+#endif
+#endif
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+	and.d	~(1 << 11),$r0
+#else
+	or.d	(1 << 11),$r0
+#endif
+#endif
+	move.d	$r0,[port_g_data_shadow]
+	move.d	$r0,[R_PORT_G_DATA]
+
+	;; setup the serial port 0 at 115200 baud for debug purposes
+
+	moveq	  IO_STATE (R_SERIAL0_XOFF, tx_stop, enable)		\
+		| IO_STATE (R_SERIAL0_XOFF, auto_xoff, disable)		\
+		| IO_FIELD (R_SERIAL0_XOFF, xoff_char, 0),$r0
+	move.d	$r0,[R_SERIAL0_XOFF]
+
+	; 115.2kbaud for both transmit and receive
+	move.b	  IO_STATE (R_SERIAL0_BAUD, tr_baud, c115k2Hz)		\
+		| IO_STATE (R_SERIAL0_BAUD, rec_baud, c115k2Hz),$r0
+	move.b	$r0,[R_SERIAL0_BAUD]
+
+	; Set up and enable the serial0 receiver.
+	move.b	  IO_STATE (R_SERIAL0_REC_CTRL, dma_err, stop)		\
+		| IO_STATE (R_SERIAL0_REC_CTRL, rec_enable, enable)	\
+		| IO_STATE (R_SERIAL0_REC_CTRL, rts_, active)		\
+		| IO_STATE (R_SERIAL0_REC_CTRL, sampling, middle)	\
+		| IO_STATE (R_SERIAL0_REC_CTRL, rec_stick_par, normal)	\
+		| IO_STATE (R_SERIAL0_REC_CTRL, rec_par, even)		\
+		| IO_STATE (R_SERIAL0_REC_CTRL, rec_par_en, disable)	\
+		| IO_STATE (R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit),$r0
+	move.b	$r0,[R_SERIAL0_REC_CTRL]
+
+	; Set up and enable the serial0 transmitter.
+	move.b	  IO_FIELD (R_SERIAL0_TR_CTRL, txd, 0)			\
+		| IO_STATE (R_SERIAL0_TR_CTRL, tr_enable, enable)	\
+		| IO_STATE (R_SERIAL0_TR_CTRL, auto_cts, disabled)	\
+		| IO_STATE (R_SERIAL0_TR_CTRL, stop_bits, one_bit)	\
+		| IO_STATE (R_SERIAL0_TR_CTRL, tr_stick_par, normal)	\
+		| IO_STATE (R_SERIAL0_TR_CTRL, tr_par, even)		\
+		| IO_STATE (R_SERIAL0_TR_CTRL, tr_par_en, disable)	\
+		| IO_STATE (R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit),$r0
+	move.b	$r0,[R_SERIAL0_TR_CTRL]
+
+	;; setup the serial port 1 at 115200 baud for debug purposes
+
+	moveq	  IO_STATE (R_SERIAL1_XOFF, tx_stop, enable)		\
+		| IO_STATE (R_SERIAL1_XOFF, auto_xoff, disable)		\
+		| IO_FIELD (R_SERIAL1_XOFF, xoff_char, 0),$r0
+	move.d	$r0,[R_SERIAL1_XOFF]
+
+	; 115.2kbaud for both transmit and receive
+	move.b	  IO_STATE (R_SERIAL1_BAUD, tr_baud, c115k2Hz)		\
+		| IO_STATE (R_SERIAL1_BAUD, rec_baud, c115k2Hz),$r0
+	move.b	$r0,[R_SERIAL1_BAUD]
+
+	; Set up and enable the serial1 receiver.
+	move.b	  IO_STATE (R_SERIAL1_REC_CTRL, dma_err, stop)		\
+		| IO_STATE (R_SERIAL1_REC_CTRL, rec_enable, enable)	\
+		| IO_STATE (R_SERIAL1_REC_CTRL, rts_, active)		\
+		| IO_STATE (R_SERIAL1_REC_CTRL, sampling, middle)	\
+		| IO_STATE (R_SERIAL1_REC_CTRL, rec_stick_par, normal)	\
+		| IO_STATE (R_SERIAL1_REC_CTRL, rec_par, even)		\
+		| IO_STATE (R_SERIAL1_REC_CTRL, rec_par_en, disable)	\
+		| IO_STATE (R_SERIAL1_REC_CTRL, rec_bitnr, rec_8bit),$r0
+	move.b	$r0,[R_SERIAL1_REC_CTRL]
+
+	; Set up and enable the serial1 transmitter.
+	move.b	  IO_FIELD (R_SERIAL1_TR_CTRL, txd, 0)			\
+		| IO_STATE (R_SERIAL1_TR_CTRL, tr_enable, enable)	\
+		| IO_STATE (R_SERIAL1_TR_CTRL, auto_cts, disabled)	\
+		| IO_STATE (R_SERIAL1_TR_CTRL, stop_bits, one_bit)	\
+		| IO_STATE (R_SERIAL1_TR_CTRL, tr_stick_par, normal)	\
+		| IO_STATE (R_SERIAL1_TR_CTRL, tr_par, even)		\
+		| IO_STATE (R_SERIAL1_TR_CTRL, tr_par_en, disable)	\
+		| IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0
+	move.b	$r0,[R_SERIAL1_TR_CTRL]
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	;; setup the serial port 2 at 115200 baud for debug purposes
+
+	moveq	  IO_STATE (R_SERIAL2_XOFF, tx_stop, enable)		\
+		| IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable)		\
+		| IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0
+	move.d	$r0,[R_SERIAL2_XOFF]
+
+	; 115.2kbaud for both transmit and receive
+	move.b	  IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz)		\
+		| IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0
+	move.b	$r0,[R_SERIAL2_BAUD]
+
+	; Set up and enable the serial2 receiver.
+	move.b	  IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop)		\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rts_, active)		\
+		| IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even)		\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable)	\
+		| IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0
+	move.b	$r0,[R_SERIAL2_REC_CTRL]
+
+	; Set up and enable the serial2 transmitter.
+	move.b	  IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0)			\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even)		\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable)	\
+		| IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0
+	move.b	$r0,[R_SERIAL2_TR_CTRL]
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+	;; setup the serial port 3 at 115200 baud for debug purposes
+
+	moveq	  IO_STATE (R_SERIAL3_XOFF, tx_stop, enable)		\
+		| IO_STATE (R_SERIAL3_XOFF, auto_xoff, disable)		\
+		| IO_FIELD (R_SERIAL3_XOFF, xoff_char, 0),$r0
+	move.d	$r0,[R_SERIAL3_XOFF]
+
+	; 115.2kbaud for both transmit and receive
+	move.b	  IO_STATE (R_SERIAL3_BAUD, tr_baud, c115k2Hz)		\
+		| IO_STATE (R_SERIAL3_BAUD, rec_baud, c115k2Hz),$r0
+	move.b	$r0,[R_SERIAL3_BAUD]
+
+	; Set up and enable the serial3 receiver.
+	move.b	  IO_STATE (R_SERIAL3_REC_CTRL, dma_err, stop)		\
+		| IO_STATE (R_SERIAL3_REC_CTRL, rec_enable, enable)	\
+		| IO_STATE (R_SERIAL3_REC_CTRL, rts_, active)		\
+		| IO_STATE (R_SERIAL3_REC_CTRL, sampling, middle)	\
+		| IO_STATE (R_SERIAL3_REC_CTRL, rec_stick_par, normal)	\
+		| IO_STATE (R_SERIAL3_REC_CTRL, rec_par, even)		\
+		| IO_STATE (R_SERIAL3_REC_CTRL, rec_par_en, disable)	\
+		| IO_STATE (R_SERIAL3_REC_CTRL, rec_bitnr, rec_8bit),$r0
+	move.b	$r0,[R_SERIAL3_REC_CTRL]
+
+	; Set up and enable the serial3 transmitter.
+	move.b	  IO_FIELD (R_SERIAL3_TR_CTRL, txd, 0)			\
+		| IO_STATE (R_SERIAL3_TR_CTRL, tr_enable, enable)	\
+		| IO_STATE (R_SERIAL3_TR_CTRL, auto_cts, disabled)	\
+		| IO_STATE (R_SERIAL3_TR_CTRL, stop_bits, one_bit)	\
+		| IO_STATE (R_SERIAL3_TR_CTRL, tr_stick_par, normal)	\
+		| IO_STATE (R_SERIAL3_TR_CTRL, tr_par, even)		\
+		| IO_STATE (R_SERIAL3_TR_CTRL, tr_par_en, disable)	\
+		| IO_STATE (R_SERIAL3_TR_CTRL, tr_bitnr, tr_8bit),$r0
+	move.b	$r0,[R_SERIAL3_TR_CTRL]
+#endif
+
+	jump	start_kernel	; jump into the C-function start_kernel in init/main.c
+
+	.data
+etrax_irv:
+	.dword	0
+romfs_start:
+	.dword	0
+romfs_length:
+	.dword	0
+romfs_in_flash:
+	.dword	0
+
+	;; put some special pages at the beginning of the kernel aligned
+	;; to page boundaries - the kernel cannot start until after this
+
+#ifdef CONFIG_CRIS_LOW_MAP
+swapper_pg_dir = 0x60002000
+#else
+swapper_pg_dir = 0xc0002000
+#endif
+
+	.section ".init.data", "aw"
+#include "../lib/hw_settings.S"
diff --git a/arch/cris/arch-v10/kernel/io_interface_mux.c b/arch/cris/arch-v10/kernel/io_interface_mux.c
new file mode 100644
index 000000000..ad64cd1c8
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/io_interface_mux.c
@@ -0,0 +1,1182 @@
+/* IO interface mux allocator for ETRAX100LX.
+ * Copyright 2004-2007, Axis Communications AB
+ */
+
+
+/* C.f. ETRAX100LX Designer's Reference chapter 19.9 */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <arch/svinto.h>
+#include <asm/io.h>
+#include <arch/io_interface_mux.h>
+#include <arch/system.h>
+
+
+#define DBG(s)
+
+/* Macro to access ETRAX 100 registers */
+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
+					  IO_STATE_(reg##_, field##_, _##val)
+
+enum io_if_group {
+	group_a = (1<<0),
+	group_b = (1<<1),
+	group_c = (1<<2),
+	group_d = (1<<3),
+	group_e = (1<<4),
+	group_f = (1<<5)
+};
+
+struct watcher
+{
+	void (*notify)(const unsigned int gpio_in_available,
+		       const unsigned int gpio_out_available,
+		       const unsigned char pa_available,
+		       const unsigned char pb_available);
+	struct watcher *next;
+};
+
+
+struct if_group
+{
+	enum io_if_group        group;
+	/* name	- the name of the group 'A' to 'F' */
+	char                   *name;
+	/* used	- a bit mask of all pins in the group in the order listed
+	 * in the tables in 19.9.1 to 19.9.6.  Note that no
+	 * distinction is made between in, out and in/out pins. */
+	unsigned int            used;
+};
+
+
+struct interface
+{
+	enum cris_io_interface   ioif;
+	/* name - the name of the interface */
+	char                    *name;
+	/* groups - OR'ed together io_if_group flags describing what pin groups
+	 * the interface uses pins in. */
+	unsigned char            groups;
+	/* used - set when the interface is allocated. */
+	unsigned char            used;
+	char                    *owner;
+	/* group_a through group_f - bit masks describing what pins in the
+	 * pin groups the interface uses. */
+	unsigned int             group_a;
+	unsigned int             group_b;
+	unsigned int             group_c;
+	unsigned int             group_d;
+	unsigned int             group_e;
+	unsigned int             group_f;
+
+	/* gpio_g_in, gpio_g_out, gpio_b - bit masks telling what pins in the
+	 * GPIO ports the interface uses.  This could be reconstucted using
+	 * the group_X masks and a table of what pins the GPIO ports use,
+	 * but that would be messy. */
+	unsigned int             gpio_g_in;
+	unsigned int             gpio_g_out;
+	unsigned char            gpio_b;
+};
+
+static struct if_group if_groups[6] = {
+	{
+		.group = group_a,
+		.name = "A",
+		.used = 0,
+	},
+	{
+		.group = group_b,
+		.name = "B",
+		.used = 0,
+	},
+	{
+		.group = group_c,
+		.name = "C",
+		.used = 0,
+	},
+	{
+		.group = group_d,
+		.name = "D",
+		.used = 0,
+	},
+	{
+		.group = group_e,
+		.name = "E",
+		.used = 0,
+	},
+	{
+		.group = group_f,
+		.name = "F",
+		.used = 0,
+	}
+};
+
+/* The order in the array must match the order of enum
+ * cris_io_interface in io_interface_mux.h */
+static struct interface interfaces[] = {
+	/* Begin Non-multiplexed interfaces */
+	{
+		.ioif = if_eth,
+		.name = "ethernet",
+		.groups = 0,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in = 0,
+		.gpio_g_out = 0,
+		.gpio_b = 0
+	},
+	{
+		.ioif = if_serial_0,
+		.name = "serial_0",
+		.groups = 0,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in = 0,
+		.gpio_g_out = 0,
+		.gpio_b = 0
+	},
+	/* End Non-multiplexed interfaces */
+	{
+		.ioif = if_serial_1,
+		.name = "serial_1",
+		.groups = group_e,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0x0f,
+		.group_f = 0,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_serial_2,
+		.name = "serial_2",
+		.groups = group_b,
+
+		.group_a = 0,
+		.group_b = 0x0f,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x000000c0,
+		.gpio_g_out = 0x000000c0,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_serial_3,
+		.name = "serial_3",
+		.groups = group_c,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0x0f,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0xc0000000,
+		.gpio_g_out = 0xc0000000,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_sync_serial_1,
+		.name = "sync_serial_1",
+		.groups = group_e | group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0x0f,
+		.group_f = 0x10,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0x10
+	},
+	{
+		.ioif = if_sync_serial_3,
+		.name = "sync_serial_3",
+		.groups = group_c | group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0x0f,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0x80,
+
+		.gpio_g_in =  0xc0000000,
+		.gpio_g_out = 0xc0000000,
+		.gpio_b = 0x80
+	},
+	{
+		.ioif = if_shared_ram,
+		.name = "shared_ram",
+		.groups = group_a,
+
+		.group_a = 0x7f8ff,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x0000ff3e,
+		.gpio_g_out = 0x0000ff38,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_shared_ram_w,
+		.name = "shared_ram_w",
+		.groups = group_a | group_d,
+
+		.group_a = 0x7f8ff,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0xff,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x00ffff3e,
+		.gpio_g_out = 0x00ffff38,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_par_0,
+		.name = "par_0",
+		.groups = group_a,
+
+		.group_a = 0x7fbff,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x0000ff3e,
+		.gpio_g_out = 0x0000ff3e,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_par_1,
+		.name = "par_1",
+		.groups = group_d,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0x7feff,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x3eff0000,
+		.gpio_g_out = 0x3eff0000,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_par_w,
+		.name = "par_w",
+		.groups = group_a | group_d,
+
+		.group_a = 0x7fbff,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0xff,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x00ffff3e,
+		.gpio_g_out = 0x00ffff3e,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_scsi8_0,
+		.name = "scsi8_0",
+		.groups = group_a | group_b | group_f,
+
+		.group_a = 0x7ffff,
+		.group_b = 0x0f,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0x10,
+
+		.gpio_g_in =  0x0000ffff,
+		.gpio_g_out = 0x0000ffff,
+		.gpio_b = 0x10
+	},
+	{
+		.ioif = if_scsi8_1,
+		.name = "scsi8_1",
+		.groups = group_c | group_d | group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0x0f,
+		.group_d = 0x7ffff,
+		.group_e = 0,
+		.group_f = 0x80,
+
+		.gpio_g_in =  0xffff0000,
+		.gpio_g_out = 0xffff0000,
+		.gpio_b = 0x80
+	},
+	{
+		.ioif = if_scsi_w,
+		.name = "scsi_w",
+		.groups = group_a | group_b | group_d | group_f,
+
+		.group_a = 0x7ffff,
+		.group_b = 0x0f,
+		.group_c = 0,
+		.group_d = 0x601ff,
+		.group_e = 0,
+		.group_f = 0x90,
+
+		.gpio_g_in =  0x01ffffff,
+		.gpio_g_out = 0x07ffffff,
+		.gpio_b = 0x80
+	},
+	{
+		.ioif = if_ata,
+		.name = "ata",
+		.groups = group_a | group_b | group_c | group_d,
+
+		.group_a = 0x7ffff,
+		.group_b = 0x0f,
+		.group_c = 0x0f,
+		.group_d = 0x7cfff,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0xf9ffffff,
+		.gpio_g_out = 0xffffffff,
+		.gpio_b = 0x80
+	},
+	{
+		.ioif = if_csp,
+		.name = "csp",
+		.groups = group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0xfc,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0xfc
+	},
+	{
+		.ioif = if_i2c,
+		.name = "i2c",
+		.groups = group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0x03,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0x03
+	},
+	{
+		.ioif = if_usb_1,
+		.name = "usb_1",
+		.groups = group_e | group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0x0f,
+		.group_f = 0x2c,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0x2c
+	},
+	{
+		.ioif = if_usb_2,
+		.name = "usb_2",
+		.groups = group_d,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0x33e00,
+		.group_f = 0,
+
+		.gpio_g_in =  0x3e000000,
+		.gpio_g_out = 0x0c000000,
+		.gpio_b = 0x00
+	},
+	/* GPIO pins */
+	{
+		.ioif = if_gpio_grp_a,
+		.name = "gpio_a",
+		.groups = group_a,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x0000ff3f,
+		.gpio_g_out = 0x0000ff3f,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_gpio_grp_b,
+		.name = "gpio_b",
+		.groups = group_b,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x000000c0,
+		.gpio_g_out = 0x000000c0,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_gpio_grp_c,
+		.name = "gpio_c",
+		.groups = group_c,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0xc0000000,
+		.gpio_g_out = 0xc0000000,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_gpio_grp_d,
+		.name = "gpio_d",
+		.groups = group_d,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x3fff0000,
+		.gpio_g_out = 0x3fff0000,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_gpio_grp_e,
+		.name = "gpio_e",
+		.groups = group_e,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0x00
+	},
+	{
+		.ioif = if_gpio_grp_f,
+		.name = "gpio_f",
+		.groups = group_f,
+
+		.group_a = 0,
+		.group_b = 0,
+		.group_c = 0,
+		.group_d = 0,
+		.group_e = 0,
+		.group_f = 0,
+
+		.gpio_g_in =  0x00000000,
+		.gpio_g_out = 0x00000000,
+		.gpio_b = 0xff
+	}
+	/* Array end */
+};
+
+static struct watcher *watchers = NULL;
+
+/* The pins that are free to use in the GPIO ports. */
+static unsigned int gpio_in_pins =  0xffffffff;
+static unsigned int gpio_out_pins = 0xffffffff;
+static unsigned char gpio_pb_pins = 0xff;
+static unsigned char gpio_pa_pins = 0xff;
+
+/* Identifiers for the owners of the GPIO pins. */
+static enum cris_io_interface gpio_pa_owners[8];
+static enum cris_io_interface gpio_pb_owners[8];
+static enum cris_io_interface gpio_pg_owners[32];
+
+static int cris_io_interface_init(void);
+
+static unsigned char clear_group_from_set(const unsigned char groups, struct if_group *group)
+{
+	return (groups & ~group->group);
+}
+
+
+static struct if_group *get_group(const unsigned char groups)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(if_groups); i++) {
+		if (groups & if_groups[i].group) {
+			return &if_groups[i];
+		}
+	}
+	return NULL;
+}
+
+
+static void notify_watchers(void)
+{
+	struct watcher *w = watchers;
+
+	DBG(printk("io_interface_mux: notifying watchers\n"));
+
+	while (NULL != w) {
+		w->notify((const unsigned int)gpio_in_pins,
+			  (const unsigned int)gpio_out_pins,
+			  (const unsigned char)gpio_pa_pins,
+			  (const unsigned char)gpio_pb_pins);
+		w = w->next;
+	}
+}
+
+
+int cris_request_io_interface(enum cris_io_interface ioif, const char *device_id)
+{
+	int set_gen_config = 0;
+	int set_gen_config_ii = 0;
+	unsigned long int gens;
+	unsigned long int gens_ii;
+	struct if_group *grp;
+	unsigned char group_set;
+	unsigned long flags;
+	int res = 0;
+
+	(void)cris_io_interface_init();
+
+	DBG(printk("cris_request_io_interface(%d, \"%s\")\n", ioif, device_id));
+
+	if ((ioif >= if_max_interfaces) || (ioif < 0)) {
+		printk(KERN_CRIT "cris_request_io_interface: Bad interface "
+			"%u submitted for %s\n",
+		       ioif,
+		       device_id);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+
+	if (interfaces[ioif].used) {
+		printk(KERN_CRIT "cris_io_interface: Cannot allocate interface "
+			"%s for %s, in use by %s\n",
+		       interfaces[ioif].name,
+		       device_id,
+		       interfaces[ioif].owner);
+		res = -EBUSY;
+		goto exit;
+	}
+
+	/* Check that all required pins in the used groups are free
+	 * before allocating. */
+	group_set = interfaces[ioif].groups;
+	while (NULL != (grp = get_group(group_set))) {
+		unsigned int if_group_use = 0;
+
+		switch (grp->group) {
+		case group_a:
+			if_group_use = interfaces[ioif].group_a;
+			break;
+		case group_b:
+			if_group_use = interfaces[ioif].group_b;
+			break;
+		case group_c:
+			if_group_use = interfaces[ioif].group_c;
+			break;
+		case group_d:
+			if_group_use = interfaces[ioif].group_d;
+			break;
+		case group_e:
+			if_group_use = interfaces[ioif].group_e;
+			break;
+		case group_f:
+			if_group_use = interfaces[ioif].group_f;
+			break;
+		default:
+			BUG_ON(1);
+		}
+
+		if (if_group_use & grp->used) {
+			printk(KERN_INFO "cris_request_io_interface: group "
+				"%s needed by %s not available\n",
+				grp->name, interfaces[ioif].name);
+			res = -EBUSY;
+			goto exit;
+		}
+
+		group_set = clear_group_from_set(group_set, grp);
+	}
+
+	/* Are the required GPIO pins available too? */
+	if (((interfaces[ioif].gpio_g_in & gpio_in_pins) !=
+			interfaces[ioif].gpio_g_in) ||
+		((interfaces[ioif].gpio_g_out & gpio_out_pins) !=
+			interfaces[ioif].gpio_g_out) ||
+		((interfaces[ioif].gpio_b & gpio_pb_pins) !=
+			interfaces[ioif].gpio_b)) {
+		printk(KERN_CRIT "cris_request_io_interface: Could not get "
+			"required pins for interface %u\n", ioif);
+		res = -EBUSY;
+		goto exit;
+	}
+
+	/* Check which registers need to be reconfigured. */
+	gens = genconfig_shadow;
+	gens_ii = gen_config_ii_shadow;
+
+	set_gen_config = 1;
+	switch (ioif)
+	{
+	/* Begin Non-multiplexed interfaces */
+	case if_eth:
+		/* fall through */
+	case if_serial_0:
+		set_gen_config = 0;
+		break;
+	/* End Non-multiplexed interfaces */
+	case if_serial_1:
+		set_gen_config_ii = 1;
+		SETS(gens_ii, R_GEN_CONFIG_II, sermode1, async);
+		break;
+	case if_serial_2:
+		SETS(gens, R_GEN_CONFIG, ser2, select);
+		break;
+	case if_serial_3:
+		SETS(gens, R_GEN_CONFIG, ser3, select);
+		set_gen_config_ii = 1;
+		SETS(gens_ii, R_GEN_CONFIG_II, sermode3, async);
+		break;
+	case if_sync_serial_1:
+		set_gen_config_ii = 1;
+		SETS(gens_ii, R_GEN_CONFIG_II, sermode1, sync);
+		break;
+	case if_sync_serial_3:
+		SETS(gens, R_GEN_CONFIG, ser3, select);
+		set_gen_config_ii = 1;
+		SETS(gens_ii, R_GEN_CONFIG_II, sermode3, sync);
+		break;
+	case if_shared_ram:
+		SETS(gens, R_GEN_CONFIG, mio, select);
+		break;
+	case if_shared_ram_w:
+		SETS(gens, R_GEN_CONFIG, mio_w, select);
+		break;
+	case if_par_0:
+		SETS(gens, R_GEN_CONFIG, par0, select);
+		break;
+	case if_par_1:
+		SETS(gens, R_GEN_CONFIG, par1, select);
+		break;
+	case if_par_w:
+		SETS(gens, R_GEN_CONFIG, par0, select);
+		SETS(gens, R_GEN_CONFIG, par_w, select);
+		break;
+	case if_scsi8_0:
+		SETS(gens, R_GEN_CONFIG, scsi0, select);
+		break;
+	case if_scsi8_1:
+		SETS(gens, R_GEN_CONFIG, scsi1, select);
+		break;
+	case if_scsi_w:
+		SETS(gens, R_GEN_CONFIG, scsi0, select);
+		SETS(gens, R_GEN_CONFIG, scsi0w, select);
+		break;
+	case if_ata:
+		SETS(gens, R_GEN_CONFIG, ata, select);
+		break;
+	case if_csp:
+		/* fall through */
+	case if_i2c:
+		set_gen_config = 0;
+		break;
+	case if_usb_1:
+		SETS(gens, R_GEN_CONFIG, usb1, select);
+		break;
+	case if_usb_2:
+		SETS(gens, R_GEN_CONFIG, usb2, select);
+		break;
+	case if_gpio_grp_a:
+		/* GPIO groups are only accounted, don't do configuration changes. */
+		/* fall through */
+	case if_gpio_grp_b:
+		/* fall through */
+	case if_gpio_grp_c:
+		/* fall through */
+	case if_gpio_grp_d:
+		/* fall through */
+	case if_gpio_grp_e:
+		/* fall through */
+	case if_gpio_grp_f:
+		set_gen_config = 0;
+		break;
+	default:
+		printk(KERN_INFO "cris_request_io_interface: Bad interface "
+			"%u submitted for %s\n",
+			ioif, device_id);
+		res = -EBUSY;
+		goto exit;
+	}
+
+	/* All needed I/O pins and pin groups are free, allocate. */
+	group_set = interfaces[ioif].groups;
+	while (NULL != (grp = get_group(group_set))) {
+		unsigned int if_group_use = 0;
+
+		switch (grp->group) {
+		case group_a:
+			if_group_use = interfaces[ioif].group_a;
+			break;
+		case group_b:
+			if_group_use = interfaces[ioif].group_b;
+			break;
+		case group_c:
+			if_group_use = interfaces[ioif].group_c;
+			break;
+		case group_d:
+			if_group_use = interfaces[ioif].group_d;
+			break;
+		case group_e:
+			if_group_use = interfaces[ioif].group_e;
+			break;
+		case group_f:
+			if_group_use = interfaces[ioif].group_f;
+			break;
+		default:
+			BUG_ON(1);
+		}
+		grp->used |= if_group_use;
+
+		group_set = clear_group_from_set(group_set, grp);
+	}
+
+	interfaces[ioif].used = 1;
+	interfaces[ioif].owner = (char*)device_id;
+
+	if (set_gen_config) {
+		volatile int i;
+		genconfig_shadow = gens;
+		*R_GEN_CONFIG = genconfig_shadow;
+		/* Wait 12 cycles before doing any DMA command */
+		for(i = 6; i > 0; i--)
+			nop();
+	}
+	if (set_gen_config_ii) {
+		gen_config_ii_shadow = gens_ii;
+		*R_GEN_CONFIG_II = gen_config_ii_shadow;
+	}
+
+	DBG(printk(KERN_DEBUG "GPIO pins: available before: "
+		"g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
+		gpio_in_pins, gpio_out_pins, gpio_pb_pins));
+	DBG(printk(KERN_DEBUG
+		"grabbing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
+		interfaces[ioif].gpio_g_in,
+		interfaces[ioif].gpio_g_out,
+		interfaces[ioif].gpio_b));
+
+	gpio_in_pins &= ~interfaces[ioif].gpio_g_in;
+	gpio_out_pins &= ~interfaces[ioif].gpio_g_out;
+	gpio_pb_pins &= ~interfaces[ioif].gpio_b;
+
+	DBG(printk(KERN_DEBUG "GPIO pins: available after: "
+		"g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
+		gpio_in_pins, gpio_out_pins, gpio_pb_pins));
+
+exit:
+	local_irq_restore(flags);
+	if (res == 0)
+		notify_watchers();
+	return res;
+}
+
+
+void cris_free_io_interface(enum cris_io_interface ioif)
+{
+	struct if_group *grp;
+	unsigned char group_set;
+	unsigned long flags;
+
+	(void)cris_io_interface_init();
+
+	if ((ioif >= if_max_interfaces) || (ioif < 0)) {
+		printk(KERN_CRIT "cris_free_io_interface: Bad interface %u\n",
+		       ioif);
+		return;
+	}
+	local_irq_save(flags);
+	if (!interfaces[ioif].used) {
+		printk(KERN_CRIT "cris_free_io_interface: Freeing free interface %u\n",
+		       ioif);
+		local_irq_restore(flags);
+		return;
+	}
+	group_set = interfaces[ioif].groups;
+	while (NULL != (grp = get_group(group_set))) {
+		unsigned int if_group_use = 0;
+
+		switch (grp->group) {
+		case group_a:
+			if_group_use = interfaces[ioif].group_a;
+			break;
+		case group_b:
+			if_group_use = interfaces[ioif].group_b;
+			break;
+		case group_c:
+			if_group_use = interfaces[ioif].group_c;
+			break;
+		case group_d:
+			if_group_use = interfaces[ioif].group_d;
+			break;
+		case group_e:
+			if_group_use = interfaces[ioif].group_e;
+			break;
+		case group_f:
+			if_group_use = interfaces[ioif].group_f;
+			break;
+		default:
+			BUG_ON(1);
+		}
+
+		if ((grp->used & if_group_use) != if_group_use)
+			BUG_ON(1);
+		grp->used = grp->used & ~if_group_use;
+
+		group_set = clear_group_from_set(group_set, grp);
+	}
+	interfaces[ioif].used = 0;
+	interfaces[ioif].owner = NULL;
+
+	DBG(printk("GPIO pins: available before: g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
+		   gpio_in_pins, gpio_out_pins, gpio_pb_pins));
+	DBG(printk("freeing pins: g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
+		   interfaces[ioif].gpio_g_in,
+		   interfaces[ioif].gpio_g_out,
+		   interfaces[ioif].gpio_b));
+
+	gpio_in_pins |= interfaces[ioif].gpio_g_in;
+	gpio_out_pins |= interfaces[ioif].gpio_g_out;
+	gpio_pb_pins |= interfaces[ioif].gpio_b;
+
+	DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
+		   gpio_in_pins, gpio_out_pins, gpio_pb_pins));
+
+	local_irq_restore(flags);
+
+	notify_watchers();
+}
+
+/* Create a bitmask from bit 0 (inclusive) to bit stop_bit
+   (non-inclusive).  stop_bit == 0 returns 0x0 */
+static inline unsigned int create_mask(const unsigned stop_bit)
+{
+	/* Avoid overflow */
+	if (stop_bit >= 32) {
+		return 0xffffffff;
+	}
+	return (1<<stop_bit)-1;
+}
+
+
+/* port can be 'a', 'b' or 'g' */
+int cris_io_interface_allocate_pins(const enum cris_io_interface ioif,
+				    const char port,
+				    const unsigned start_bit,
+				    const unsigned stop_bit)
+{
+	unsigned int i;
+	unsigned int mask = 0;
+	unsigned int tmp_mask;
+	unsigned long int flags;
+	enum cris_io_interface *owners;
+
+	(void)cris_io_interface_init();
+
+	DBG(printk("cris_io_interface_allocate_pins: if=%d port=%c start=%u stop=%u\n",
+		   ioif, port, start_bit, stop_bit));
+
+	if (!((start_bit <= stop_bit) &&
+	      ((((port == 'a') || (port == 'b')) && (stop_bit < 8)) ||
+	       ((port == 'g') && (stop_bit < 32))))) {
+		return -EINVAL;
+	}
+
+	mask = create_mask(stop_bit + 1);
+	tmp_mask = create_mask(start_bit);
+	mask &= ~tmp_mask;
+
+	DBG(printk("cris_io_interface_allocate_pins: port=%c start=%u stop=%u mask=0x%08x\n",
+		   port, start_bit, stop_bit, mask));
+
+	local_irq_save(flags);
+
+	switch (port) {
+	case 'a':
+		if ((gpio_pa_pins & mask) != mask) {
+			local_irq_restore(flags);
+			return -EBUSY;
+		}
+		owners = gpio_pa_owners;
+		gpio_pa_pins &= ~mask;
+		break;
+	case 'b':
+		if ((gpio_pb_pins & mask) != mask) {
+			local_irq_restore(flags);
+			return -EBUSY;
+		}
+		owners = gpio_pb_owners;
+		gpio_pb_pins &= ~mask;
+		break;
+	case 'g':
+		if (((gpio_in_pins & mask) != mask) ||
+		    ((gpio_out_pins & mask) != mask)) {
+			local_irq_restore(flags);
+			return -EBUSY;
+		}
+		owners = gpio_pg_owners;
+		gpio_in_pins &= ~mask;
+		gpio_out_pins &= ~mask;
+		break;
+	default:
+		local_irq_restore(flags);
+		return -EINVAL;
+	}
+
+	for (i = start_bit; i <= stop_bit; i++) {
+		owners[i] = ioif;
+	}
+	local_irq_restore(flags);
+
+	notify_watchers();
+	return 0;
+}
+
+
+/* port can be 'a', 'b' or 'g' */
+int cris_io_interface_free_pins(const enum cris_io_interface ioif,
+                                const char port,
+                                const unsigned start_bit,
+                                const unsigned stop_bit)
+{
+	unsigned int i;
+	unsigned int mask = 0;
+	unsigned int tmp_mask;
+	unsigned long int flags;
+	enum cris_io_interface *owners;
+
+	(void)cris_io_interface_init();
+
+	if (!((start_bit <= stop_bit) &&
+	      ((((port == 'a') || (port == 'b')) && (stop_bit < 8)) ||
+	       ((port == 'g') && (stop_bit < 32))))) {
+		return -EINVAL;
+	}
+
+	mask = create_mask(stop_bit + 1);
+	tmp_mask = create_mask(start_bit);
+	mask &= ~tmp_mask;
+
+	DBG(printk("cris_io_interface_free_pins: port=%c start=%u stop=%u mask=0x%08x\n",
+		   port, start_bit, stop_bit, mask));
+
+	local_irq_save(flags);
+
+	switch (port) {
+	case 'a':
+		if ((~gpio_pa_pins & mask) != mask) {
+			local_irq_restore(flags);
+			printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins");
+		}
+		owners = gpio_pa_owners;
+		break;
+	case 'b':
+		if ((~gpio_pb_pins & mask) != mask) {
+			local_irq_restore(flags);
+			printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins");
+		}
+		owners = gpio_pb_owners;
+		break;
+	case 'g':
+		if (((~gpio_in_pins & mask) != mask) ||
+		    ((~gpio_out_pins & mask) != mask)) {
+			local_irq_restore(flags);
+			printk(KERN_CRIT "cris_io_interface_free_pins: Freeing free pins");
+		}
+		owners = gpio_pg_owners;
+		break;
+	default:
+		owners = NULL; /* Cannot happen. Shut up, gcc! */
+	}
+
+	for (i = start_bit; i <= stop_bit; i++) {
+		if (owners[i] != ioif) {
+			printk(KERN_CRIT "cris_io_interface_free_pins: Freeing unowned pins");
+		}
+	}
+
+	/* All was ok, change data. */
+	switch (port) {
+	case 'a':
+		gpio_pa_pins |= mask;
+		break;
+	case 'b':
+		gpio_pb_pins |= mask;
+		break;
+	case 'g':
+		gpio_in_pins |= mask;
+		gpio_out_pins |= mask;
+		break;
+	}
+
+	for (i = start_bit; i <= stop_bit; i++) {
+		owners[i] = if_unclaimed;
+	}
+	local_irq_restore(flags);
+	notify_watchers();
+
+        return 0;
+}
+
+
+int cris_io_interface_register_watcher(void (*notify)(const unsigned int gpio_in_available,
+                                                      const unsigned int gpio_out_available,
+                                                      const unsigned char pa_available,
+                                                      const unsigned char pb_available))
+{
+	struct watcher *w;
+
+	(void)cris_io_interface_init();
+
+	if (NULL == notify) {
+		return -EINVAL;
+	}
+	w = kmalloc(sizeof(*w), GFP_KERNEL);
+	if (!w) {
+		return -ENOMEM;
+	}
+	w->notify = notify;
+	w->next = watchers;
+	watchers = w;
+
+	w->notify((const unsigned int)gpio_in_pins,
+		  (const unsigned int)gpio_out_pins,
+		  (const unsigned char)gpio_pa_pins,
+		  (const unsigned char)gpio_pb_pins);
+
+	return 0;
+}
+
+void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available,
+						     const unsigned int gpio_out_available,
+                                                     const unsigned char pa_available,
+						     const unsigned char pb_available))
+{
+	struct watcher *w = watchers, *prev = NULL;
+
+	(void)cris_io_interface_init();
+
+	while ((NULL != w) && (w->notify != notify)){
+		prev = w;
+		w = w->next;
+	}
+	if (NULL != w) {
+		if (NULL != prev) {
+			prev->next = w->next;
+		} else {
+			watchers = w->next;
+		}
+		kfree(w);
+		return;
+	}
+	printk(KERN_WARNING "cris_io_interface_delete_watcher: Deleting unknown watcher 0x%p\n", notify);
+}
+
+
+static int cris_io_interface_init(void)
+{
+	static int first = 1;
+	int i;
+
+	if (!first) {
+		return 0;
+	}
+	first = 0;
+
+	for (i = 0; i<8; i++) {
+		gpio_pa_owners[i] = if_unclaimed;
+		gpio_pb_owners[i] = if_unclaimed;
+		gpio_pg_owners[i] = if_unclaimed;
+	}
+	for (; i<32; i++) {
+		gpio_pg_owners[i] = if_unclaimed;
+	}
+	return 0;
+}
+
+
+module_init(cris_io_interface_init);
+
+
+EXPORT_SYMBOL(cris_request_io_interface);
+EXPORT_SYMBOL(cris_free_io_interface);
+EXPORT_SYMBOL(cris_io_interface_allocate_pins);
+EXPORT_SYMBOL(cris_io_interface_free_pins);
+EXPORT_SYMBOL(cris_io_interface_register_watcher);
+EXPORT_SYMBOL(cris_io_interface_delete_watcher);
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
new file mode 100644
index 000000000..09cae80a8
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -0,0 +1,235 @@
+/*
+ *	linux/arch/cris/kernel/irq.c
+ *
+ *      Copyright (c) 2000-2002 Axis Communications AB
+ *
+ *      Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ *      This file contains the interrupt vectors and some
+ *      helper functions
+ *
+ */
+
+#include <asm/irq.h>
+#include <asm/current.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
+#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
+
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
+/* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
+ * global just so that the kernel gdb can use it.
+ */
+
+void
+set_int_vector(int n, irqvectptr addr)
+{
+	etrax_irv->v[n + 0x20] = (irqvectptr)addr;
+}
+
+/* the breakpoint vector is obviously not made just like the normal irq handlers
+ * but needs to contain _code_ to jump to addr.
+ *
+ * the BREAK n instruction jumps to IBR + n * 8
+ */
+
+void
+set_break_vector(int n, irqvectptr addr)
+{
+	unsigned short *jinstr = (unsigned short *)&etrax_irv->v[n*2];
+	unsigned long *jaddr = (unsigned long *)(jinstr + 1);
+
+	/* if you don't know what this does, do not touch it! */
+	
+	*jinstr = 0x0d3f;
+	*jaddr = (unsigned long)addr;
+
+	/* 00000026 <clrlop+1a> 3f0d82000000     jump  0x82 */
+}
+
+/*
+ * This builds up the IRQ handler stubs using some ugly macros in irq.h
+ *
+ * These macros create the low-level assembly IRQ routines that do all
+ * the operations that are needed. They are also written to be fast - and to
+ * disable interrupts as little as humanly possible.
+ *
+ */
+
+/* IRQ0 and 1 are special traps */
+void hwbreakpoint(void);
+void IRQ1_interrupt(void);
+BUILD_TIMER_IRQ(2, 0x04)       /* the timer interrupt is somewhat special */
+BUILD_IRQ(3, 0x08)
+BUILD_IRQ(4, 0x10)
+BUILD_IRQ(5, 0x20)
+BUILD_IRQ(6, 0x40)
+BUILD_IRQ(7, 0x80)
+BUILD_IRQ(8, 0x100)
+BUILD_IRQ(9, 0x200)
+BUILD_IRQ(10, 0x400)
+BUILD_IRQ(11, 0x800)
+BUILD_IRQ(12, 0x1000)
+BUILD_IRQ(13, 0x2000)
+void mmu_bus_fault(void);      /* IRQ 14 is the bus fault interrupt */
+void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
+BUILD_IRQ(16, 0x10000 | 0x20000)  /* ethernet tx interrupt needs to block rx */
+BUILD_IRQ(17, 0x20000 | 0x10000)  /* ...and vice versa */
+BUILD_IRQ(18, 0x40000)
+BUILD_IRQ(19, 0x80000)
+BUILD_IRQ(20, 0x100000)
+BUILD_IRQ(21, 0x200000)
+BUILD_IRQ(22, 0x400000)
+BUILD_IRQ(23, 0x800000)
+BUILD_IRQ(24, 0x1000000)
+BUILD_IRQ(25, 0x2000000)
+/* IRQ 26-30 are reserved */
+BUILD_IRQ(31, 0x80000000)
+ 
+/*
+ * Pointers to the low-level handlers 
+ */
+
+static void (*interrupt[NR_IRQS])(void) = {
+	NULL, NULL, IRQ2_interrupt, IRQ3_interrupt,
+	IRQ4_interrupt, IRQ5_interrupt, IRQ6_interrupt, IRQ7_interrupt,
+	IRQ8_interrupt, IRQ9_interrupt, IRQ10_interrupt, IRQ11_interrupt,
+	IRQ12_interrupt, IRQ13_interrupt, NULL, NULL,	
+	IRQ16_interrupt, IRQ17_interrupt, IRQ18_interrupt, IRQ19_interrupt,	
+	IRQ20_interrupt, IRQ21_interrupt, IRQ22_interrupt, IRQ23_interrupt,	
+	IRQ24_interrupt, IRQ25_interrupt, NULL, NULL, NULL, NULL, NULL,
+	IRQ31_interrupt
+};
+
+static void enable_crisv10_irq(struct irq_data *data)
+{
+	crisv10_unmask_irq(data->irq);
+}
+
+static void disable_crisv10_irq(struct irq_data *data)
+{
+	crisv10_mask_irq(data->irq);
+}
+
+static struct irq_chip crisv10_irq_type = {
+	.name		= "CRISv10",
+	.irq_shutdown	= disable_crisv10_irq,
+	.irq_enable	= enable_crisv10_irq,
+	.irq_disable	= disable_crisv10_irq,
+};
+
+void weird_irq(void);
+void system_call(void);  /* from entry.S */
+void do_sigtrap(void); /* from entry.S */
+void gdb_handle_breakpoint(void); /* from entry.S */
+
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+/* Handle multiple IRQs */
+void do_multiple_IRQ(struct pt_regs* regs)
+{
+	int bit;
+	unsigned masked;
+	unsigned mask;
+	unsigned ethmask = 0;
+
+	/* Get interrupts to mask and handle */
+	mask = masked = *R_VECT_MASK_RD;
+
+	/* Never mask timer IRQ */
+	mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0));
+
+	/*
+	 * If either ethernet interrupt (rx or tx) is active then block
+	 * the other one too. Unblock afterwards also.
+	 */
+	if (mask &
+	    (IO_STATE(R_VECT_MASK_RD, dma0, active) |
+	     IO_STATE(R_VECT_MASK_RD, dma1, active))) {
+		ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) |
+			   IO_MASK(R_VECT_MASK_RD, dma1));
+	}
+
+	/* Block them */
+	*R_VECT_MASK_CLR = (mask | ethmask);
+
+	/* An extra irq_enter here to prevent softIRQs to run after
+	 * each do_IRQ. This will decrease the interrupt latency.
+	 */
+	irq_enter();
+
+	/* Handle all IRQs */
+	for (bit = 2; bit < 32; bit++) {
+		if (masked & (1 << bit)) {
+			do_IRQ(bit, regs);
+		}
+	}
+
+	/* This irq_exit() will trigger the soft IRQs. */
+	irq_exit();
+
+	/* Unblock the IRQs again */
+	*R_VECT_MASK_SET = (masked | ethmask);
+}
+
+/* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and
+   setting the irq vector table.
+*/
+
+void __init init_IRQ(void)
+{
+	int i;
+
+	/* clear all interrupt masks */
+	*R_IRQ_MASK0_CLR = 0xffffffff;
+	*R_IRQ_MASK1_CLR = 0xffffffff;
+	*R_IRQ_MASK2_CLR = 0xffffffff;
+	*R_VECT_MASK_CLR = 0xffffffff;
+
+        for (i = 0; i < 256; i++)
+               etrax_irv->v[i] = weird_irq;
+
+	/* Initialize IRQ handler descriptors. */
+	for(i = 2; i < NR_IRQS; i++) {
+		irq_set_chip_and_handler(i, &crisv10_irq_type,
+					 handle_simple_irq);
+		set_int_vector(i, interrupt[i]);
+	}
+
+        /* the entries in the break vector contain actual code to be
+           executed by the associated break handler, rather than just a jump
+           address. therefore we need to setup a default breakpoint handler
+           for all breakpoints */
+	for (i = 0; i < 16; i++)
+                set_break_vector(i, do_sigtrap);
+
+	/* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */
+	set_int_vector(15, multiple_interrupt);
+
+	/* 0 and 1 which are special breakpoint/NMI traps */
+	set_int_vector(0, hwbreakpoint);
+	set_int_vector(1, IRQ1_interrupt);
+
+	/* and irq 14 which is the mmu bus fault handler */
+	set_int_vector(14, mmu_bus_fault);
+
+	/* setup the system-call trap, which is reached by BREAK 13 */
+	set_break_vector(13, system_call);
+
+        /* setup a breakpoint handler for debugging used for both user and
+           kernel mode debugging  (which is why it is not inside an ifdef
+           CONFIG_ETRAX_KGDB) */
+        set_break_vector(8, gdb_handle_breakpoint);
+
+#ifdef CONFIG_ETRAX_KGDB
+	/* setup kgdb if its enabled, and break into the debugger */
+	kgdb_init();
+	breakpoint();
+#endif
+}
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
new file mode 100644
index 000000000..22d846bfc
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -0,0 +1,1144 @@
+/*!**************************************************************************
+*!
+*! FILE NAME  : kgdb.c
+*!
+*! DESCRIPTION: Implementation of the gdb stub with respect to ETRAX 100.
+*!              It is a mix of arch/m68k/kernel/kgdb.c and cris_stub.c.
+*!
+*!---------------------------------------------------------------------------
+*! HISTORY
+*!
+*! DATE         NAME            CHANGES
+*! ----         ----            -------
+*! Apr 26 1999  Hendrik Ruijter Initial version.
+*! May  6 1999  Hendrik Ruijter Removed call to strlen in libc and removed
+*!                              struct assignment as it generates calls to
+*!                              memcpy in libc.
+*! Jun 17 1999  Hendrik Ruijter Added gdb 4.18 support. 'X', 'qC' and 'qL'.
+*! Jul 21 1999  Bjorn Wesen     eLinux port
+*!
+*!---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN
+*!
+*!**************************************************************************/
+/* @(#) cris_stub.c 1.3 06/17/99 */
+
+/*
+ *  kgdb usage notes:
+ *  -----------------
+ *
+ * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be 
+ * built with different gcc flags: "-g" is added to get debug infos, and
+ * "-fomit-frame-pointer" is omitted to make debugging easier. Since the
+ * resulting kernel will be quite big (approx. > 7 MB), it will be stripped
+ * before compresion. Such a kernel will behave just as usually, except if
+ * given a "debug=<device>" command line option. (Only serial devices are
+ * allowed for <device>, i.e. no printers or the like; possible values are
+ * machine depedend and are the same as for the usual debug device, the one
+ * for logging kernel messages.) If that option is given and the device can be
+ * initialized, the kernel will connect to the remote gdb in trap_init(). The
+ * serial parameters are fixed to 8N1 and 115200 bps, for easyness of
+ * implementation.
+ *
+ * To start a debugging session, start that gdb with the debugging kernel
+ * image (the one with the symbols, vmlinux.debug) named on the command line.
+ * This file will be used by gdb to get symbol and debugging infos about the
+ * kernel. Next, select remote debug mode by
+ *    target remote <device>
+ * where <device> is the name of the serial device over which the debugged
+ * machine is connected. Maybe you have to adjust the baud rate by
+ *    set remotebaud <rate>
+ * or also other parameters with stty:
+ *    shell stty ... </dev/...
+ * If the kernel to debug has already booted, it waited for gdb and now
+ * connects, and you'll see a breakpoint being reported. If the kernel isn't
+ * running yet, start it now. The order of gdb and the kernel doesn't matter.
+ * Another thing worth knowing about in the getting-started phase is how to
+ * debug the remote protocol itself. This is activated with
+ *    set remotedebug 1
+ * gdb will then print out each packet sent or received. You'll also get some
+ * messages about the gdb stub on the console of the debugged machine.
+ *
+ * If all that works, you can use lots of the usual debugging techniques on
+ * the kernel, e.g. inspecting and changing variables/memory, setting
+ * breakpoints, single stepping and so on. It's also possible to interrupt the
+ * debugged kernel by pressing C-c in gdb. Have fun! :-)
+ *
+ * The gdb stub is entered (and thus the remote gdb gets control) in the
+ * following situations:
+ *
+ *  - If breakpoint() is called. This is just after kgdb initialization, or if
+ *    a breakpoint() call has been put somewhere into the kernel source.
+ *    (Breakpoints can of course also be set the usual way in gdb.)
+ *    In eLinux, we call breakpoint() in init/main.c after IRQ initialization.
+ *
+ *  - If there is a kernel exception, i.e. bad_super_trap() or die_if_kernel()
+ *    are entered. All the CPU exceptions are mapped to (more or less..., see
+ *    the hard_trap_info array below) appropriate signal, which are reported
+ *    to gdb. die_if_kernel() is usually called after some kind of access
+ *    error and thus is reported as SIGSEGV.
+ *
+ *  - When panic() is called. This is reported as SIGABRT.
+ *
+ *  - If C-c is received over the serial line, which is treated as
+ *    SIGINT.
+ *
+ * Of course, all these signals are just faked for gdb, since there is no
+ * signal concept as such for the kernel. It also isn't possible --obviously--
+ * to set signal handlers from inside gdb, or restart the kernel with a
+ * signal.
+ *
+ * Current limitations:
+ *
+ *  - While the kernel is stopped, interrupts are disabled for safety reasons
+ *    (i.e., variables not changing magically or the like). But this also
+ *    means that the clock isn't running anymore, and that interrupts from the
+ *    hardware may get lost/not be served in time. This can cause some device
+ *    errors...
+ *
+ *  - When single-stepping, only one instruction of the current thread is
+ *    executed, but interrupts are allowed for that time and will be serviced
+ *    if pending. Be prepared for that.
+ *
+ *  - All debugging happens in kernel virtual address space. There's no way to
+ *    access physical memory not mapped in kernel space, or to access user
+ *    space. A way to work around this is using get_user_long & Co. in gdb
+ *    expressions, but only for the current process.
+ *
+ *  - Interrupting the kernel only works if interrupts are currently allowed,
+ *    and the interrupt of the serial line isn't blocked by some other means
+ *    (IPL too high, disabled, ...)
+ *
+ *  - The gdb stub is currently not reentrant, i.e. errors that happen therein
+ *    (e.g. accessing invalid memory) may not be caught correctly. This could
+ *    be removed in future by introducing a stack of struct registers.
+ *
+ */
+
+/*
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to kgdb_init() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint(). 
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ */
+
+
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/linkage.h>
+#include <linux/reboot.h>
+
+#include <asm/setup.h>
+#include <asm/ptrace.h>
+
+#include <arch/svinto.h>
+#include <asm/irq.h>
+
+static int kgdb_started = 0;
+
+/********************************* Register image ****************************/
+/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
+   Reference", p. 1-1, with the additional register definitions of the
+   ETRAX 100LX in cris-opc.h.
+   There are 16 general 32-bit registers, R0-R15, where R14 is the stack
+   pointer, SP, and R15 is the program counter, PC.
+   There are 16 special registers, P0-P15, where three of the unimplemented
+   registers, P0, P4 and P8, are reserved as zero-registers. A read from
+   any of these registers returns zero and a write has no effect. */
+
+typedef
+struct register_image
+{
+	/* Offset */
+	unsigned int     r0;   /* 0x00 */
+	unsigned int     r1;   /* 0x04 */
+	unsigned int     r2;   /* 0x08 */
+	unsigned int     r3;   /* 0x0C */
+	unsigned int     r4;   /* 0x10 */
+	unsigned int     r5;   /* 0x14 */
+	unsigned int     r6;   /* 0x18 */
+	unsigned int     r7;   /* 0x1C */
+	unsigned int     r8;   /* 0x20 Frame pointer */
+	unsigned int     r9;   /* 0x24 */
+	unsigned int    r10;   /* 0x28 */
+	unsigned int    r11;   /* 0x2C */
+	unsigned int    r12;   /* 0x30 */
+	unsigned int    r13;   /* 0x34 */
+	unsigned int     sp;   /* 0x38 Stack pointer */
+	unsigned int     pc;   /* 0x3C Program counter */
+
+        unsigned char    p0;   /* 0x40 8-bit zero-register */
+	unsigned char    vr;   /* 0x41 Version register */
+
+        unsigned short   p4;   /* 0x42 16-bit zero-register */
+	unsigned short  ccr;   /* 0x44 Condition code register */
+	
+	unsigned int    mof;   /* 0x46 Multiply overflow register */
+	
+        unsigned int     p8;   /* 0x4A 32-bit zero-register */
+	unsigned int    ibr;   /* 0x4E Interrupt base register */
+	unsigned int    irp;   /* 0x52 Interrupt return pointer */
+	unsigned int    srp;   /* 0x56 Subroutine return pointer */
+	unsigned int    bar;   /* 0x5A Breakpoint address register */
+	unsigned int   dccr;   /* 0x5E Double condition code register */
+	unsigned int    brp;   /* 0x62 Breakpoint return pointer (pc in caller) */
+	unsigned int    usp;   /* 0x66 User mode stack pointer */
+} registers;
+
+/* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
+int getDebugChar (void);
+
+/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
+void putDebugChar (int val);
+
+void enableDebugIRQ (void);
+
+/******************** Prototypes for global functions. ***********************/
+
+/* The string str is prepended with the GDB printout token and sent. */
+void putDebugString (const unsigned char *str, int length); /* used by etrax100ser.c */
+
+/* The hook for both static (compiled) and dynamic breakpoints set by GDB.
+   ETRAX 100 specific. */
+void handle_breakpoint (void);                          /* used by irq.c */
+
+/* The hook for an interrupt generated by GDB. ETRAX 100 specific. */
+void handle_interrupt (void);                           /* used by irq.c */
+
+/* A static breakpoint to be used at startup. */
+void breakpoint (void);                                 /* called by init/main.c */
+
+/* From osys_int.c, executing_task contains the number of the current
+   executing task in osys. Does not know of object-oriented threads. */
+extern unsigned char executing_task;
+
+/* The number of characters used for a 64 bit thread identifier. */
+#define HEXCHARS_IN_THREAD_ID 16
+
+/********************************** Packet I/O ******************************/
+/* BUFMAX defines the maximum number of characters in
+   inbound/outbound buffers */
+#define BUFMAX 512
+
+/* Run-length encoding maximum length. Send 64 at most. */
+#define RUNLENMAX 64
+
+/* The inbound/outbound buffers used in packet I/O */
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+/* Error and warning messages. */
+enum error_type
+{
+	SUCCESS, E01, E02, E03, E04, E05, E06, E07
+};
+static char *error_message[] =
+{
+	"",
+	"E01 Set current or general thread - H[c,g] - internal error.",
+	"E02 Change register content - P - cannot change read-only register.",
+	"E03 Thread is not alive.", /* T, not used. */
+	"E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
+	"E05 Change register content - P - the register is not implemented..",
+	"E06 Change memory content - M - internal error.",
+	"E07 Change register content - P - the register is not stored on the stack"
+};
+/********************************* Register image ****************************/
+/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
+   Reference", p. 1-1, with the additional register definitions of the
+   ETRAX 100LX in cris-opc.h.
+   There are 16 general 32-bit registers, R0-R15, where R14 is the stack
+   pointer, SP, and R15 is the program counter, PC.
+   There are 16 special registers, P0-P15, where three of the unimplemented
+   registers, P0, P4 and P8, are reserved as zero-registers. A read from
+   any of these registers returns zero and a write has no effect. */
+enum register_name
+{
+	R0,  R1,   R2,  R3,
+	R4,  R5,   R6,  R7,
+	R8,  R9,   R10, R11,
+	R12, R13,  SP,  PC,
+	P0,  VR,   P2,  P3,
+	P4,  CCR,  P6,  MOF,
+	P8,  IBR,  IRP, SRP,
+	BAR, DCCR, BRP, USP
+};
+
+/* The register sizes of the registers in register_name. An unimplemented register
+   is designated by size 0 in this array. */
+static int register_size[] =
+{
+	4, 4, 4, 4,
+	4, 4, 4, 4,
+	4, 4, 4, 4,
+	4, 4, 4, 4,
+	1, 1, 0, 0,
+	2, 2, 0, 4,
+	4, 4, 4, 4,
+	4, 4, 4, 4
+};
+
+/* Contains the register image of the executing thread in the assembler
+   part of the code in order to avoid horrible addressing modes. */
+registers cris_reg;
+
+/* FIXME: Should this be used? Delete otherwise. */
+/* Contains the assumed consistency state of the register image. Uses the
+   enum error_type for state information. */
+static int consistency_status = SUCCESS;
+
+/********************************** Handle exceptions ************************/
+/* The variable cris_reg contains the register image associated with the
+   current_thread_c variable. It is a complete register image created at
+   entry. The reg_g contains a register image of a task where the general
+   registers are taken from the stack and all special registers are taken
+   from the executing task. It is associated with current_thread_g and used
+   in order to provide access mainly for 'g', 'G' and 'P'.
+*/
+
+/********************************** Breakpoint *******************************/
+/* Use an internal stack in the breakpoint and interrupt response routines */
+#define INTERNAL_STACK_SIZE 1024
+char internal_stack[INTERNAL_STACK_SIZE];
+
+/* Due to the breakpoint return pointer, a state variable is needed to keep
+   track of whether it is a static (compiled) or dynamic (gdb-invoked)
+   breakpoint to be handled. A static breakpoint uses the content of register
+   BRP as it is whereas a dynamic breakpoint requires subtraction with 2
+   in order to execute the instruction. The first breakpoint is static. */
+static unsigned char is_dyn_brkp = 0;
+
+/********************************* String library ****************************/
+/* Single-step over library functions creates trap loops. */
+
+/* Copy char s2[] to s1[]. */
+static char*
+gdb_cris_strcpy (char *s1, const char *s2)
+{
+	char *s = s1;
+	
+	for (s = s1; (*s++ = *s2++) != '\0'; )
+		;
+	return (s1);
+}
+
+/* Find length of s[]. */
+static int
+gdb_cris_strlen (const char *s)
+{
+	const char *sc;
+	
+	for (sc = s; *sc != '\0'; sc++)
+		;
+	return (sc - s);
+}
+
+/* Find first occurrence of c in s[n]. */
+static void*
+gdb_cris_memchr (const void *s, int c, int n)
+{
+	const unsigned char uc = c;
+	const unsigned char *su;
+	
+	for (su = s; 0 < n; ++su, --n)
+		if (*su == uc)
+			return ((void *)su);
+	return (NULL);
+}
+/******************************* Standard library ****************************/
+/* Single-step over library functions creates trap loops. */
+/* Convert string to long. */
+static int
+gdb_cris_strtol (const char *s, char **endptr, int base)
+{
+	char *s1;
+	char *sd;
+	int x = 0;
+	
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
+        
+        if (endptr)
+        {
+                /* Unconverted suffix is stored in endptr unless endptr is NULL. */
+                *endptr = s1;
+        }
+        
+	return x;
+}
+
+/********************************** Packet I/O ******************************/
+/* Returns the integer equivalent of a hexadecimal character. */
+static int
+hex (char ch)
+{
+	if ((ch >= 'a') && (ch <= 'f'))
+		return (ch - 'a' + 10);
+	if ((ch >= '0') && (ch <= '9'))
+		return (ch - '0');
+	if ((ch >= 'A') && (ch <= 'F'))
+		return (ch - 'A' + 10);
+	return (-1);
+}
+
+/* Convert the memory, pointed to by mem into hexadecimal representation.
+   Put the result in buf, and return a pointer to the last character
+   in buf (null). */
+
+static char *
+mem2hex(char *buf, unsigned char *mem, int count)
+{
+	int i;
+	int ch;
+        
+        if (mem == NULL) {
+                /* Bogus read from m0. FIXME: What constitutes a valid address? */
+                for (i = 0; i < count; i++) {
+                        *buf++ = '0';
+                        *buf++ = '0';
+                }
+        } else {
+                /* Valid mem address. */
+                for (i = 0; i < count; i++) {
+                        ch = *mem++;
+			buf = hex_byte_pack(buf, ch);
+                }
+        }
+        
+        /* Terminate properly. */
+	*buf = '\0';
+	return (buf);
+}
+
+/* Convert the array, in hexadecimal representation, pointed to by buf into
+   binary representation. Put the result in mem, and return a pointer to
+   the character after the last byte written. */
+static unsigned char*
+hex2mem (unsigned char *mem, char *buf, int count)
+{
+	int i;
+	unsigned char ch;
+	for (i = 0; i < count; i++) {
+		ch = hex (*buf++) << 4;
+		ch = ch + hex (*buf++);
+		*mem++ = ch;
+	}
+	return (mem);
+}
+
+/* Put the content of the array, in binary representation, pointed to by buf
+   into memory pointed to by mem, and return a pointer to the character after
+   the last byte written.
+   Gdb will escape $, #, and the escape char (0x7d). */
+static unsigned char*
+bin2mem (unsigned char *mem, unsigned char *buf, int count)
+{
+	int i;
+	unsigned char *next;
+	for (i = 0; i < count; i++) {
+		/* Check for any escaped characters. Be paranoid and
+		   only unescape chars that should be escaped. */
+		if (*buf == 0x7d) {
+			next = buf + 1;
+			if (*next == 0x3 || *next == 0x4 || *next == 0x5D) /* #, $, ESC */
+				{
+					buf++;
+					*buf += 0x20;
+				}
+		}
+		*mem++ = *buf++;
+	}
+	return (mem);
+}
+
+/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
+   returned. */
+static void
+getpacket (char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	int i;
+	int count;
+	char ch;
+	do {
+		while ((ch = getDebugChar ()) != '$')
+			/* Wait for the start character $ and ignore all other characters */;
+		checksum = 0;
+		xmitcsum = -1;
+		count = 0;
+		/* Read until a # or the end of the buffer is reached */
+		while (count < BUFMAX - 1) {
+			ch = getDebugChar ();
+			if (ch == '#')
+				break;
+			checksum = checksum + ch;
+			buffer[count] = ch;
+			count = count + 1;
+		}
+		buffer[count] = '\0';
+		
+		if (ch == '#') {
+			xmitcsum = hex (getDebugChar ()) << 4;
+			xmitcsum += hex (getDebugChar ());
+			if (checksum != xmitcsum) {
+				/* Wrong checksum */
+				putDebugChar ('-');
+			}
+			else {
+				/* Correct checksum */
+				putDebugChar ('+');
+				/* If sequence characters are received, reply with them */
+				if (buffer[2] == ':') {
+					putDebugChar (buffer[0]);
+					putDebugChar (buffer[1]);
+					/* Remove the sequence characters from the buffer */
+					count = gdb_cris_strlen (buffer);
+					for (i = 3; i <= count; i++)
+						buffer[i - 3] = buffer[i];
+				}
+			}
+		}
+	} while (checksum != xmitcsum);
+}
+
+/* Send $<data>#<checksum> from the <data> in the array buffer. */
+
+static void
+putpacket(char *buffer)
+{
+	int checksum;
+	int runlen;
+	int encode;
+	
+	do {
+		char *src = buffer;
+		putDebugChar ('$');
+		checksum = 0;
+		while (*src) {
+			/* Do run length encoding */
+			putDebugChar (*src);
+			checksum += *src;
+			runlen = 0;
+			while (runlen < RUNLENMAX && *src == src[runlen]) {
+				runlen++;
+			}
+			if (runlen > 3) {
+				/* Got a useful amount */
+				putDebugChar ('*');
+				checksum += '*';
+				encode = runlen + ' ' - 4;
+				putDebugChar (encode);
+				checksum += encode;
+				src += runlen;
+			}
+			else {
+				src++;
+			}
+		}
+		putDebugChar('#');
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
+	} while(kgdb_started && (getDebugChar() != '+'));
+}
+
+/* The string str is prepended with the GDB printout token and sent. Required
+   in traditional implementations. */
+void
+putDebugString (const unsigned char *str, int length)
+{
+        remcomOutBuffer[0] = 'O';
+        mem2hex(&remcomOutBuffer[1], (unsigned char *)str, length);
+        putpacket(remcomOutBuffer);
+}
+
+/********************************* Register image ****************************/
+/* Write a value to a specified register in the register image of the current
+   thread. Returns status code SUCCESS, E02 or E05. */
+static int
+write_register (int regno, char *val)
+{
+	int status = SUCCESS;
+	registers *current_reg = &cris_reg;
+
+        if (regno >= R0 && regno <= PC) {
+		/* 32-bit register with simple offset. */
+		hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int),
+			 val, sizeof(unsigned int));
+	}
+        else if (regno == P0 || regno == VR || regno == P4 || regno == P8) {
+		/* Do not support read-only registers. */
+		status = E02;
+	}
+        else if (regno == CCR) {
+		/* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented, 
+                   and P7 (MOF) is 32 bits in ETRAX 100LX. */
+		hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
+			 val, sizeof(unsigned short));
+	}
+	else if (regno >= MOF && regno <= USP) {
+		/* 32 bit register with complex offset.  (P8 has been taken care of.) */
+		hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
+			 val, sizeof(unsigned int));
+	} 
+        else {
+		/* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
+		status = E05;
+	}
+	return status;
+}
+
+/* Read a value from a specified register in the register image. Returns the
+   value in the register or -1 for non-implemented registers.
+   Should check consistency_status after a call which may be E05 after changes
+   in the implementation. */
+static int
+read_register (char regno, unsigned int *valptr)
+{
+	registers *current_reg = &cris_reg;
+
+	if (regno >= R0 && regno <= PC) {
+		/* 32-bit register with simple offset. */
+		*valptr = *(unsigned int *)((char *)current_reg + regno * sizeof(unsigned int));
+                return SUCCESS;
+	}
+	else if (regno == P0 || regno == VR) {
+		/* 8 bit register with complex offset. */
+		*valptr = (unsigned int)(*(unsigned char *)
+                                         ((char *)&(current_reg->p0) + (regno-P0) * sizeof(char)));
+                return SUCCESS;
+	}
+	else if (regno == P4 || regno == CCR) {
+		/* 16 bit register with complex offset. */
+		*valptr = (unsigned int)(*(unsigned short *)
+                                         ((char *)&(current_reg->p4) + (regno-P4) * sizeof(unsigned short)));
+                return SUCCESS;
+	}
+	else if (regno >= MOF && regno <= USP) {
+		/* 32 bit register with complex offset. */
+		*valptr = *(unsigned int *)((char *)&(current_reg->p8)
+                                            + (regno-P8) * sizeof(unsigned int));
+                return SUCCESS;
+	}
+	else {
+		/* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
+		consistency_status = E05;
+		return E05;
+	}
+}
+
+/********************************** Handle exceptions ************************/
+/* Build and send a response packet in order to inform the host the
+   stub is stopped. TAAn...:r...;n...:r...;n...:r...;
+                    AA = signal number
+                    n... = register number (hex)
+                    r... = register contents
+                    n... = `thread'
+                    r... = thread process ID.  This is a hex integer.
+                    n... = other string not starting with valid hex digit.
+                    gdb should ignore this n,r pair and go on to the next.
+                    This way we can extend the protocol. */
+static void
+stub_is_stopped(int sigval)
+{
+	char *ptr = remcomOutBuffer;
+	int regno;
+
+	unsigned int reg_cont;
+	int status;
+        
+	/* Send trap type (converted to signal) */
+
+	*ptr++ = 'T';
+	ptr = hex_byte_pack(ptr, sigval);
+
+	/* Send register contents. We probably only need to send the
+	 * PC, frame pointer and stack pointer here. Other registers will be
+	 * explicitly asked for. But for now, send all.
+	 */
+	
+	for (regno = R0; regno <= USP; regno++) {
+		/* Store n...:r...; for the registers in the buffer. */
+
+                status = read_register (regno, &reg_cont);
+                
+		if (status == SUCCESS) {
+			ptr = hex_byte_pack(ptr, regno);
+                        *ptr++ = ':';
+
+                        ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
+                                      register_size[regno]);
+                        *ptr++ = ';';
+                }
+                
+	}
+
+	/* null-terminate and send it off */
+
+	*ptr = 0;
+
+	putpacket (remcomOutBuffer);
+}
+
+/* Performs a complete re-start from scratch. */
+static void
+kill_restart (void)
+{
+	machine_restart("");
+}
+
+/* All expected commands are sent from remote.c. Send a response according
+   to the description in remote.c. */
+void
+handle_exception (int sigval)
+{
+	/* Send response. */
+
+	stub_is_stopped (sigval);
+
+	for (;;) {
+		remcomOutBuffer[0] = '\0';
+		getpacket (remcomInBuffer);
+		switch (remcomInBuffer[0]) {
+			case 'g':
+				/* Read registers: g
+				   Success: Each byte of register data is described by two hex digits.
+				   Registers are in the internal order for GDB, and the bytes
+				   in a register  are in the same order the machine uses.
+				   Failure: void. */
+				
+				mem2hex(remcomOutBuffer, (char *)&cris_reg, sizeof(registers));
+				break;
+				
+			case 'G':
+				/* Write registers. GXX..XX
+				   Each byte of register data  is described by two hex digits.
+				   Success: OK
+				   Failure: void. */
+				hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers));
+				gdb_cris_strcpy (remcomOutBuffer, "OK");
+				break;
+				
+			case 'P':
+				/* Write register. Pn...=r...
+				   Write register n..., hex value without 0x, with value r...,
+				   which contains a hex value without 0x and two hex digits
+				   for each byte in the register (target byte order). P1f=11223344 means
+				   set register 31 to 44332211.
+				   Success: OK
+				   Failure: E02, E05 */
+				{
+					char *suffix;
+					int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16);
+					int status;
+					status = write_register (regno, suffix+1);
+
+					switch (status) {
+						case E02:
+							/* Do not support read-only registers. */
+							gdb_cris_strcpy (remcomOutBuffer, error_message[E02]);
+							break;
+						case E05:
+							/* Do not support non-existing registers. */
+							gdb_cris_strcpy (remcomOutBuffer, error_message[E05]);
+							break;
+						case E07:
+							/* Do not support non-existing registers on the stack. */
+							gdb_cris_strcpy (remcomOutBuffer, error_message[E07]);
+							break;
+						default:
+							/* Valid register number. */
+							gdb_cris_strcpy (remcomOutBuffer, "OK");
+							break;
+					}
+				}
+				break;
+				
+			case 'm':
+				/* Read from memory. mAA..AA,LLLL
+				   AA..AA is the address and LLLL is the length.
+				   Success: XX..XX is the memory content.  Can be fewer bytes than
+				   requested if only part of the data may be read. m6000120a,6c means
+				   retrieve 108 byte from base address 6000120a.
+				   Failure: void. */
+				{
+                                        char *suffix;
+					unsigned char *addr = (unsigned char *)gdb_cris_strtol(&remcomInBuffer[1],
+                                                                                               &suffix, 16);                                        int length = gdb_cris_strtol(suffix+1, 0, 16);
+                                        
+                                        mem2hex(remcomOutBuffer, addr, length);
+                                }
+				break;
+				
+			case 'X':
+				/* Write to memory. XAA..AA,LLLL:XX..XX
+				   AA..AA is the start address,  LLLL is the number of bytes, and
+				   XX..XX is the binary data.
+				   Success: OK
+				   Failure: void. */
+			case 'M':
+				/* Write to memory. MAA..AA,LLLL:XX..XX
+				   AA..AA is the start address,  LLLL is the number of bytes, and
+				   XX..XX is the hexadecimal data.
+				   Success: OK
+				   Failure: void. */
+				{
+					char *lenptr;
+					char *dataptr;
+					unsigned char *addr = (unsigned char *)gdb_cris_strtol(&remcomInBuffer[1],
+										      &lenptr, 16);
+					int length = gdb_cris_strtol(lenptr+1, &dataptr, 16);
+					if (*lenptr == ',' && *dataptr == ':') {
+						if (remcomInBuffer[0] == 'M') {
+							hex2mem(addr, dataptr + 1, length);
+						}
+						else /* X */ {
+							bin2mem(addr, dataptr + 1, length);
+						}
+						gdb_cris_strcpy (remcomOutBuffer, "OK");
+					}
+					else {
+						gdb_cris_strcpy (remcomOutBuffer, error_message[E06]);
+					}
+				}
+				break;
+				
+			case 'c':
+				/* Continue execution. cAA..AA
+				   AA..AA is the address where execution is resumed. If AA..AA is
+				   omitted, resume at the present address.
+				   Success: return to the executing thread.
+				   Failure: will never know. */
+				if (remcomInBuffer[1] != '\0') {
+					cris_reg.pc = gdb_cris_strtol (&remcomInBuffer[1], 0, 16);
+				}
+				enableDebugIRQ();
+				return;
+				
+			case 's':
+				/* Step. sAA..AA
+				   AA..AA is the address where execution is resumed. If AA..AA is
+				   omitted, resume at the present address. Success: return to the
+				   executing thread. Failure: will never know.
+				   
+				   Should never be invoked. The single-step is implemented on
+				   the host side. If ever invoked, it is an internal error E04. */
+				gdb_cris_strcpy (remcomOutBuffer, error_message[E04]);
+				putpacket (remcomOutBuffer);
+				return;
+				
+			case '?':
+				/* The last signal which caused a stop. ?
+				   Success: SAA, where AA is the signal number.
+				   Failure: void. */
+				remcomOutBuffer[0] = 'S';
+				remcomOutBuffer[1] = hex_asc_hi(sigval);
+				remcomOutBuffer[2] = hex_asc_lo(sigval);
+				remcomOutBuffer[3] = 0;
+				break;
+				
+			case 'D':
+				/* Detach from host. D
+				   Success: OK, and return to the executing thread.
+				   Failure: will never know */
+				putpacket ("OK");
+				return;
+				
+			case 'k':
+			case 'r':
+				/* kill request or reset request.
+				   Success: restart of target.
+				   Failure: will never know. */
+				kill_restart ();
+				break;
+				
+			case 'C':
+			case 'S':
+			case '!':
+			case 'R':
+			case 'd':
+				/* Continue with signal sig. Csig;AA..AA
+				   Step with signal sig. Ssig;AA..AA
+				   Use the extended remote protocol. !
+				   Restart the target system. R0
+				   Toggle debug flag. d
+				   Search backwards. tAA:PP,MM
+				   Not supported: E04 */
+				gdb_cris_strcpy (remcomOutBuffer, error_message[E04]);
+				break;
+				
+			default:
+				/* The stub should ignore other request and send an empty
+				   response ($#<checksum>). This way we can extend the protocol and GDB
+				   can tell whether the stub it is talking to uses the old or the new. */
+				remcomOutBuffer[0] = 0;
+				break;
+		}
+		putpacket(remcomOutBuffer);
+	}
+}
+
+/********************************** Breakpoint *******************************/
+/* The hook for both a static (compiled) and a dynamic breakpoint set by GDB.
+   An internal stack is used by the stub. The register image of the caller is
+   stored in the structure register_image.
+   Interactive communication with the host is handled by handle_exception and
+   finally the register image is restored. */
+
+void kgdb_handle_breakpoint(void);
+
+asm ("\n"
+"  .global kgdb_handle_breakpoint\n"
+"kgdb_handle_breakpoint:\n"
+";;\n"
+";; Response to the break-instruction\n"
+";;\n"
+";; Create a register image of the caller\n"
+";;\n"
+"  move     $dccr,[cris_reg+0x5E] ; Save the flags in DCCR before disable interrupts\n"
+"  di                        ; Disable interrupts\n"
+"  move.d   $r0,[cris_reg]        ; Save R0\n"
+"  move.d   $r1,[cris_reg+0x04]   ; Save R1\n"
+"  move.d   $r2,[cris_reg+0x08]   ; Save R2\n"
+"  move.d   $r3,[cris_reg+0x0C]   ; Save R3\n"
+"  move.d   $r4,[cris_reg+0x10]   ; Save R4\n"
+"  move.d   $r5,[cris_reg+0x14]   ; Save R5\n"
+"  move.d   $r6,[cris_reg+0x18]   ; Save R6\n"
+"  move.d   $r7,[cris_reg+0x1C]   ; Save R7\n"
+"  move.d   $r8,[cris_reg+0x20]   ; Save R8\n"
+"  move.d   $r9,[cris_reg+0x24]   ; Save R9\n"
+"  move.d   $r10,[cris_reg+0x28]  ; Save R10\n"
+"  move.d   $r11,[cris_reg+0x2C]  ; Save R11\n"
+"  move.d   $r12,[cris_reg+0x30]  ; Save R12\n"
+"  move.d   $r13,[cris_reg+0x34]  ; Save R13\n"
+"  move.d   $sp,[cris_reg+0x38]   ; Save SP (R14)\n"
+";; Due to the old assembler-versions BRP might not be recognized\n"
+"  .word 0xE670              ; move brp,$r0\n"
+"  subq     2,$r0             ; Set to address of previous instruction.\n"
+"  move.d   $r0,[cris_reg+0x3c]   ; Save the address in PC (R15)\n"
+"  clear.b  [cris_reg+0x40]      ; Clear P0\n"
+"  move     $vr,[cris_reg+0x41]   ; Save special register P1\n"
+"  clear.w  [cris_reg+0x42]      ; Clear P4\n"
+"  move     $ccr,[cris_reg+0x44]  ; Save special register CCR\n"
+"  move     $mof,[cris_reg+0x46]  ; P7\n"
+"  clear.d  [cris_reg+0x4A]      ; Clear P8\n"
+"  move     $ibr,[cris_reg+0x4E]  ; P9,\n"
+"  move     $irp,[cris_reg+0x52]  ; P10,\n"
+"  move     $srp,[cris_reg+0x56]  ; P11,\n"
+"  move     $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n"
+"                            ; P13, register DCCR already saved\n"
+";; Due to the old assembler-versions BRP might not be recognized\n"
+"  .word 0xE670              ; move brp,r0\n"
+";; Static (compiled) breakpoints must return to the next instruction in order\n"
+";; to avoid infinite loops. Dynamic (gdb-invoked) must restore the instruction\n"
+";; in order to execute it when execution is continued.\n"
+"  test.b   [is_dyn_brkp]    ; Is this a dynamic breakpoint?\n"
+"  beq      is_static         ; No, a static breakpoint\n"
+"  nop\n"
+"  subq     2,$r0              ; rerun the instruction the break replaced\n"
+"is_static:\n"
+"  moveq    1,$r1\n"
+"  move.b   $r1,[is_dyn_brkp] ; Set the state variable to dynamic breakpoint\n"
+"  move.d   $r0,[cris_reg+0x62]    ; Save the return address in BRP\n"
+"  move     $usp,[cris_reg+0x66]   ; USP\n"
+";;\n"
+";; Handle the communication\n"
+";;\n"
+"  move.d   internal_stack+1020,$sp ; Use the internal stack which grows upward\n"
+"  moveq    5,$r10                   ; SIGTRAP\n"
+"  jsr      handle_exception       ; Interactive routine\n"
+";;\n"
+";; Return to the caller\n"
+";;\n"
+"   move.d  [cris_reg],$r0         ; Restore R0\n"
+"   move.d  [cris_reg+0x04],$r1    ; Restore R1\n"
+"   move.d  [cris_reg+0x08],$r2    ; Restore R2\n"
+"   move.d  [cris_reg+0x0C],$r3    ; Restore R3\n"
+"   move.d  [cris_reg+0x10],$r4    ; Restore R4\n"
+"   move.d  [cris_reg+0x14],$r5    ; Restore R5\n"
+"   move.d  [cris_reg+0x18],$r6    ; Restore R6\n"
+"   move.d  [cris_reg+0x1C],$r7    ; Restore R7\n"
+"   move.d  [cris_reg+0x20],$r8    ; Restore R8\n"
+"   move.d  [cris_reg+0x24],$r9    ; Restore R9\n"
+"   move.d  [cris_reg+0x28],$r10   ; Restore R10\n"
+"   move.d  [cris_reg+0x2C],$r11   ; Restore R11\n"
+"   move.d  [cris_reg+0x30],$r12   ; Restore R12\n"
+"   move.d  [cris_reg+0x34],$r13   ; Restore R13\n"
+";;\n"
+";; FIXME: Which registers should be restored?\n"
+";;\n"
+"   move.d  [cris_reg+0x38],$sp    ; Restore SP (R14)\n"
+"   move    [cris_reg+0x56],$srp   ; Restore the subroutine return pointer.\n"
+"   move    [cris_reg+0x5E],$dccr  ; Restore DCCR\n"
+"   move    [cris_reg+0x66],$usp   ; Restore USP\n"
+"   jump    [cris_reg+0x62]       ; A jump to the content in register BRP works.\n"
+"   nop                       ;\n"
+"\n");
+
+/* The hook for an interrupt generated by GDB. An internal stack is used
+   by the stub. The register image of the caller is stored in the structure
+   register_image. Interactive communication with the host is handled by
+   handle_exception and finally the register image is restored. Due to the
+   old assembler which does not recognise the break instruction and the
+   breakpoint return pointer hex-code is used. */
+
+void kgdb_handle_serial(void);
+
+asm ("\n"
+"  .global kgdb_handle_serial\n"
+"kgdb_handle_serial:\n"
+";;\n"
+";; Response to a serial interrupt\n"
+";;\n"
+"\n"
+"  move     $dccr,[cris_reg+0x5E] ; Save the flags in DCCR\n"
+"  di                        ; Disable interrupts\n"
+"  move.d   $r0,[cris_reg]        ; Save R0\n"
+"  move.d   $r1,[cris_reg+0x04]   ; Save R1\n"
+"  move.d   $r2,[cris_reg+0x08]   ; Save R2\n"
+"  move.d   $r3,[cris_reg+0x0C]   ; Save R3\n"
+"  move.d   $r4,[cris_reg+0x10]   ; Save R4\n"
+"  move.d   $r5,[cris_reg+0x14]   ; Save R5\n"
+"  move.d   $r6,[cris_reg+0x18]   ; Save R6\n"
+"  move.d   $r7,[cris_reg+0x1C]   ; Save R7\n"
+"  move.d   $r8,[cris_reg+0x20]   ; Save R8\n"
+"  move.d   $r9,[cris_reg+0x24]   ; Save R9\n"
+"  move.d   $r10,[cris_reg+0x28]  ; Save R10\n"
+"  move.d   $r11,[cris_reg+0x2C]  ; Save R11\n"
+"  move.d   $r12,[cris_reg+0x30]  ; Save R12\n"
+"  move.d   $r13,[cris_reg+0x34]  ; Save R13\n"
+"  move.d   $sp,[cris_reg+0x38]   ; Save SP (R14)\n"
+"  move     $irp,[cris_reg+0x3c]  ; Save the address in PC (R15)\n"
+"  clear.b  [cris_reg+0x40]      ; Clear P0\n"
+"  move     $vr,[cris_reg+0x41]   ; Save special register P1,\n"
+"  clear.w  [cris_reg+0x42]      ; Clear P4\n"
+"  move     $ccr,[cris_reg+0x44]  ; Save special register CCR\n"
+"  move     $mof,[cris_reg+0x46]  ; P7\n"
+"  clear.d  [cris_reg+0x4A]      ; Clear P8\n"
+"  move     $ibr,[cris_reg+0x4E]  ; P9,\n"
+"  move     $irp,[cris_reg+0x52]  ; P10,\n"
+"  move     $srp,[cris_reg+0x56]  ; P11,\n"
+"  move     $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n"
+"                            ; P13, register DCCR already saved\n"
+";; Due to the old assembler-versions BRP might not be recognized\n"
+"  .word 0xE670              ; move brp,r0\n"
+"  move.d   $r0,[cris_reg+0x62]   ; Save the return address in BRP\n"
+"  move     $usp,[cris_reg+0x66]  ; USP\n"
+"\n"
+";; get the serial character (from debugport.c) and check if it is a ctrl-c\n"
+"\n"
+"  jsr getDebugChar\n"
+"  cmp.b 3, $r10\n"
+"  bne goback\n"
+"  nop\n"
+"\n"
+"  move.d  [cris_reg+0x5E], $r10		; Get DCCR\n"
+"  btstq	   8, $r10			; Test the U-flag.\n"
+"  bmi	   goback\n"
+"  nop\n"
+"\n"
+";;\n"
+";; Handle the communication\n"
+";;\n"
+"  move.d   internal_stack+1020,$sp ; Use the internal stack\n"
+"  moveq    2,$r10                   ; SIGINT\n"
+"  jsr      handle_exception       ; Interactive routine\n"
+"\n"
+"goback:\n"
+";;\n"
+";; Return to the caller\n"
+";;\n"
+"   move.d  [cris_reg],$r0         ; Restore R0\n"
+"   move.d  [cris_reg+0x04],$r1    ; Restore R1\n"
+"   move.d  [cris_reg+0x08],$r2    ; Restore R2\n"
+"   move.d  [cris_reg+0x0C],$r3    ; Restore R3\n"
+"   move.d  [cris_reg+0x10],$r4    ; Restore R4\n"
+"   move.d  [cris_reg+0x14],$r5    ; Restore R5\n"
+"   move.d  [cris_reg+0x18],$r6    ; Restore R6\n"
+"   move.d  [cris_reg+0x1C],$r7    ; Restore R7\n"
+"   move.d  [cris_reg+0x20],$r8    ; Restore R8\n"
+"   move.d  [cris_reg+0x24],$r9    ; Restore R9\n"
+"   move.d  [cris_reg+0x28],$r10   ; Restore R10\n"
+"   move.d  [cris_reg+0x2C],$r11   ; Restore R11\n"
+"   move.d  [cris_reg+0x30],$r12   ; Restore R12\n"
+"   move.d  [cris_reg+0x34],$r13   ; Restore R13\n"
+";;\n"
+";; FIXME: Which registers should be restored?\n"
+";;\n"
+"   move.d  [cris_reg+0x38],$sp    ; Restore SP (R14)\n"
+"   move    [cris_reg+0x56],$srp   ; Restore the subroutine return pointer.\n"
+"   move    [cris_reg+0x5E],$dccr  ; Restore DCCR\n"
+"   move    [cris_reg+0x66],$usp   ; Restore USP\n"
+"   reti                      ; Return from the interrupt routine\n"
+"   nop\n"
+"\n");
+
+/* Use this static breakpoint in the start-up only. */
+
+void
+breakpoint(void)
+{
+	kgdb_started = 1;
+	is_dyn_brkp = 0;     /* This is a static, not a dynamic breakpoint. */
+	__asm__ volatile ("break 8"); /* Jump to handle_breakpoint. */
+}
+
+/* initialize kgdb. doesn't break into the debugger, but sets up irq and ports */
+
+void
+kgdb_init(void)
+{
+	/* could initialize debug port as well but it's done in head.S already... */
+
+        /* breakpoint handler is now set in irq.c */
+	set_int_vector(8, kgdb_handle_serial);
+	
+	enableDebugIRQ();
+}
+
+/****************************** End of file **********************************/
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
new file mode 100644
index 000000000..02b783457
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -0,0 +1,193 @@
+/*
+ *  linux/arch/cris/kernel/process.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Copyright (C) 2000-2002  Axis Communications AB
+ *
+ *  Authors:   Bjorn Wesen (bjornw@axis.com)
+ *             Mikael Starvik (starvik@axis.com)
+ *
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <arch/svinto.h>
+#include <linux/init.h>
+#include <arch/system.h>
+#include <linux/ptrace.h>
+
+#ifdef CONFIG_ETRAX_GPIO
+void etrax_gpio_wake_up_check(void); /* drivers/gpio.c */
+#endif
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+#ifdef CONFIG_ETRAX_GPIO
+	etrax_gpio_wake_up_check();
+#endif
+	local_irq_enable();
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+
+void exit_thread(void)
+{
+	/* Nothing needs to be done.  */
+}
+
+/* if the watchdog is enabled, we can simply disable interrupts and go
+ * into an eternal loop, and the watchdog will reset the CPU after 0.1s
+ * if on the other hand the watchdog wasn't enabled, we just enable it and wait
+ */
+
+void hard_reset_now (void)
+{
+	/*
+	 * Don't declare this variable elsewhere.  We don't want any other
+	 * code to know about it than the watchdog handler in entry.S and
+	 * this code, implementing hard reset through the watchdog.
+	 */
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	extern int cause_of_death;
+#endif
+
+	printk("*** HARD RESET ***\n");
+	local_irq_disable();
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	cause_of_death = 0xbedead;
+#else
+	/* Since we dont plan to keep on resetting the watchdog,
+	   the key can be arbitrary hence three */
+	*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |
+		IO_STATE(R_WATCHDOG, enable, start);
+#endif
+
+	while(1) /* waiting for RETRIBUTION! */ ;
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *t)
+{
+	return task_pt_regs(t)->irp;
+}
+
+/* setup the child's kernel stack with a pt_regs and switch_stack on it.
+ * it will be un-nested during _resume and _ret_from_sys_call when the
+ * new thread is scheduled.
+ *
+ * also setup the thread switching structure which is used to keep
+ * thread-specific data during _resumes.
+ *
+ */
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long arg, struct task_struct *p)
+{
+	struct pt_regs *childregs = task_pt_regs(p);
+	struct switch_stack *swstack = ((struct switch_stack *)childregs) - 1;
+	
+	/* put the pt_regs structure at the end of the new kernel stack page and fix it up
+	 * remember that the task_struct doubles as the kernel stack for the task
+	 */
+
+	if (unlikely(p->flags & PF_KTHREAD)) {
+		memset(swstack, 0,
+			sizeof(struct switch_stack) + sizeof(struct pt_regs));
+		swstack->r1 = usp;
+		swstack->r2 = arg;
+		childregs->dccr = 1 << I_DCCR_BITNR;
+		swstack->return_ip = (unsigned long) ret_from_kernel_thread;
+		p->thread.ksp = (unsigned long) swstack;
+		p->thread.usp = 0;
+		return 0;
+	}
+	*childregs = *current_pt_regs();  /* struct copy of pt_regs */
+
+        childregs->r10 = 0;  /* child returns 0 after a fork/clone */
+
+	/* put the switch stack right below the pt_regs */
+
+	swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */
+
+	/* we want to return into ret_from_sys_call after the _resume */
+
+	swstack->return_ip = (unsigned long) ret_from_fork; /* Will call ret_from_sys_call */
+	
+	/* fix the user-mode stackpointer */
+
+	p->thread.usp = usp ?: rdusp();
+
+	/* and the kernel-mode one */
+
+	p->thread.ksp = (unsigned long) swstack;
+
+#ifdef DEBUG
+	printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs);
+	show_registers(childregs);
+#endif
+
+	return 0;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+#if 0
+	/* YURGH. TODO. */
+
+        unsigned long ebp, esp, eip;
+        unsigned long stack_page;
+        int count = 0;
+        if (!p || p == current || p->state == TASK_RUNNING)
+                return 0;
+        stack_page = (unsigned long)p;
+        esp = p->thread.esp;
+        if (!stack_page || esp < stack_page || esp > 8188+stack_page)
+                return 0;
+        /* include/asm-i386/system.h:switch_to() pushes ebp last. */
+        ebp = *(unsigned long *) esp;
+        do {
+                if (ebp < stack_page || ebp > 8184+stack_page)
+                        return 0;
+                eip = *(unsigned long *) (ebp+4);
+		if (!in_sched_functions(eip))
+			return eip;
+                ebp = *(unsigned long *) ebp;
+        } while (count++ < 16);
+#endif
+        return 0;
+}
+#undef last_sched
+#undef first_sched
+
+void show_regs(struct pt_regs * regs)
+{
+	unsigned long usp = rdusp();
+
+	show_regs_print_info(KERN_DEFAULT);
+
+	printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+	       regs->irp, regs->srp, regs->dccr, usp, regs->mof );
+	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+	       regs->r0, regs->r1, regs->r2, regs->r3);
+	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+	       regs->r4, regs->r5, regs->r6, regs->r7);
+	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+	       regs->r8, regs->r9, regs->r10, regs->r11);
+	printk("r12: %08lx r13: %08lx oR10: %08lx\n",
+	       regs->r12, regs->r13, regs->orig_r10);
+}
+
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
new file mode 100644
index 000000000..bfddfb994
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2000-2003, Axis Communications AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+#include <linux/security.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+
+/* 
+ * Determines which bits in DCCR the user has access to.
+ * 1 = access, 0 = no access.
+ */
+#define DCCR_MASK 0x0000001f     /* XNZVC */
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+inline long get_reg(struct task_struct *task, unsigned int regno)
+{
+	/* USP is a special case, it's not in the pt_regs struct but
+	 * in the tasks thread struct
+	 */
+
+	if (regno == PT_USP)
+		return task->thread.usp;
+	else if (regno < PT_MAX)
+		return ((unsigned long *)task_pt_regs(task))[regno];
+	else
+		return 0;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+inline int put_reg(struct task_struct *task, unsigned int regno,
+			  unsigned long data)
+{
+	if (regno == PT_USP)
+		task->thread.usp = data;
+	else if (regno < PT_MAX)
+		((unsigned long *)task_pt_regs(task))[regno] = data;
+	else
+		return -1;
+	return 0;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching.
+ *
+ * Make sure the single step bit is not set.
+ */
+void 
+ptrace_disable(struct task_struct *child)
+{
+       /* Todo - pending singlesteps? */
+       clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+}
+
+/* 
+ * Note that this implementation of ptrace behaves differently from vanilla
+ * ptrace.  Contrary to what the man page says, in the PTRACE_PEEKTEXT,
+ * PTRACE_PEEKDATA, and PTRACE_PEEKUSER requests the data variable is not
+ * ignored.  Instead, the data variable is expected to point at a location
+ * (in user space) where the result of the ptrace call is written (instead of
+ * being returned).
+ */
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret;
+	unsigned int regno = addr >> 2;
+	unsigned long __user *datap = (unsigned long __user *)data;
+
+	switch (request) {
+		/* Read word at location address. */ 
+		case PTRACE_PEEKTEXT:
+		case PTRACE_PEEKDATA:
+			ret = generic_ptrace_peekdata(child, addr, data);
+			break;
+
+		/* Read the word at location address in the USER area. */
+		case PTRACE_PEEKUSR: {
+			unsigned long tmp;
+
+			ret = -EIO;
+			if ((addr & 3) || regno > PT_MAX)
+				break;
+
+			tmp = get_reg(child, regno);
+			ret = put_user(tmp, datap);
+			break;
+		}
+		
+		/* Write the word at location address. */
+		case PTRACE_POKETEXT:
+		case PTRACE_POKEDATA:
+			ret = generic_ptrace_pokedata(child, addr, data);
+			break;
+ 
+ 		/* Write the word at location address in the USER area. */
+		case PTRACE_POKEUSR:
+			ret = -EIO;
+			if ((addr & 3) || regno > PT_MAX)
+				break;
+
+			if (regno == PT_DCCR) {
+				/* don't allow the tracing process to change stuff like
+				 * interrupt enable, kernel/user bit, dma enables etc.
+				 */
+				data &= DCCR_MASK;
+				data |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
+			}
+			if (put_reg(child, regno, data))
+				break;
+			ret = 0;
+			break;
+
+		/* Get all GP registers from the child. */
+		case PTRACE_GETREGS: {
+		  	int i;
+			unsigned long tmp;
+			
+			ret = 0;
+			for (i = 0; i <= PT_MAX; i++) {
+				tmp = get_reg(child, i);
+				
+				if (put_user(tmp, datap)) {
+					ret = -EFAULT;
+					break;
+				}
+				
+				datap++;
+			}
+
+			break;
+		}
+
+		/* Set all GP registers in the child. */
+		case PTRACE_SETREGS: {
+			int i;
+			unsigned long tmp;
+			
+			ret = 0;
+			for (i = 0; i <= PT_MAX; i++) {
+				if (get_user(tmp, datap)) {
+					ret = -EFAULT;
+					break;
+				}
+				
+				if (i == PT_DCCR) {
+					tmp &= DCCR_MASK;
+					tmp |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
+				}
+				
+				put_reg(child, i, tmp);
+				datap++;
+			}
+			
+			break;
+		}
+
+		default:
+			ret = ptrace_request(child, request, addr, data);
+			break;
+	}
+
+	return ret;
+}
+
+void do_syscall_trace(void)
+{
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+	
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+	
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+	
+	/*
+	 * This isn't the same as continuing with a signal, but it will do for
+	 * normal use.
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/cris/arch-v10/kernel/setup.c b/arch/cris/arch-v10/kernel/setup.c
new file mode 100644
index 000000000..7ab31f1c7
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/setup.c
@@ -0,0 +1,106 @@
+/*
+ *
+ *  linux/arch/cris/arch-v10/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Copyright (c) 2001-2002  Axis Communications AB
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <arch/system.h>
+
+#ifdef CONFIG_PROC_FS
+#define HAS_FPU		0x0001
+#define HAS_MMU		0x0002
+#define HAS_ETHERNET100	0x0004
+#define HAS_TOKENRING	0x0008
+#define HAS_SCSI	0x0010
+#define HAS_ATA		0x0020
+#define HAS_USB		0x0040
+#define HAS_IRQ_BUG	0x0080
+#define HAS_MMU_BUG	0x0100
+
+static struct cpu_info {
+	char *model;
+	unsigned short cache;
+	unsigned short flags;
+} cpu_info[] = {
+	/* The first four models will never ever run this code and are
+	   only here for display.  */
+	{ "ETRAX 1",         0, 0 },
+	{ "ETRAX 2",         0, 0 },
+	{ "ETRAX 3",         0, HAS_TOKENRING },
+	{ "ETRAX 4",         0, HAS_TOKENRING | HAS_SCSI },
+	{ "Unknown",         0, 0 },
+	{ "Unknown",         0, 0 },
+	{ "Unknown",         0, 0 },
+	{ "Simulator",       8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA },
+	{ "ETRAX 100",       8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG },
+	{ "ETRAX 100",       8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA },
+	{ "ETRAX 100LX",     8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB | HAS_MMU | HAS_MMU_BUG },
+	{ "ETRAX 100LX v2",  8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB | HAS_MMU  },
+	{ "Unknown",         0, 0 }  /* This entry MUST be the last */
+};
+
+int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long revision;
+	struct cpu_info *info;
+
+	/* read the version register in the CPU and print some stuff */
+
+	revision = rdvr();
+
+	if (revision >= ARRAY_SIZE(cpu_info))
+		info = &cpu_info[ARRAY_SIZE(cpu_info) - 1];
+	else
+		info = &cpu_info[revision];
+
+	seq_printf(m,
+		   "processor\t: 0\n"
+		   "cpu\t\t: CRIS\n"
+		   "cpu revision\t: %lu\n"
+		   "cpu model\t: %s\n"
+		   "cache size\t: %d kB\n"
+		   "fpu\t\t: %s\n"
+		   "mmu\t\t: %s\n"
+		   "mmu DMA bug\t: %s\n"
+		   "ethernet\t: %s Mbps\n"
+		   "token ring\t: %s\n"
+		   "scsi\t\t: %s\n"
+		   "ata\t\t: %s\n"
+		   "usb\t\t: %s\n"
+		   "bogomips\t: %lu.%02lu\n",
+
+		   revision,
+		   info->model,
+		   info->cache,
+		   info->flags & HAS_FPU ? "yes" : "no",
+		   info->flags & HAS_MMU ? "yes" : "no",
+		   info->flags & HAS_MMU_BUG ? "yes" : "no",
+		   info->flags & HAS_ETHERNET100 ? "10/100" : "10",
+		   info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no",
+		   info->flags & HAS_SCSI ? "yes" : "no",
+		   info->flags & HAS_ATA ? "yes" : "no",
+		   info->flags & HAS_USB ? "yes" : "no",
+		   (loops_per_jiffy * HZ + 500) / 500000,
+		   ((loops_per_jiffy * HZ + 500) / 5000) % 100);
+
+	return 0;
+}
+
+#endif /* CONFIG_PROC_FS */
+
+void
+show_etrax_copyright(void)
+{
+	printk(KERN_INFO
+               "Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB\n");
+}
diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c
new file mode 100644
index 000000000..2454a0b02
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/shadows.c
@@ -0,0 +1,36 @@
+/*
+ * Various shadow registers. Defines for these are in include/asm-etrax100/io.h
+ */
+
+/* Shadows for internal Etrax-registers */
+
+unsigned long genconfig_shadow;
+unsigned long gen_config_ii_shadow;
+unsigned long port_g_data_shadow;
+unsigned char port_pa_dir_shadow;
+unsigned char port_pa_data_shadow;
+unsigned char port_pb_i2c_shadow;
+unsigned char port_pb_config_shadow;
+unsigned char port_pb_dir_shadow;
+unsigned char port_pb_data_shadow;
+unsigned long r_timer_ctrl_shadow;
+
+/* Shadows for external I/O port registers.
+ * These are only usable if there actually IS a latch connected
+ * to the corresponding external chip-select pin.
+ *
+ * A common usage is that CSP0 controls LEDs and CSP4 video chips.
+ */
+
+unsigned long port_cse1_shadow;
+unsigned long port_csp0_shadow;
+unsigned long port_csp4_shadow;
+
+/* Corresponding addresses for the ports.
+ * These are initialized in arch/cris/mm/init.c using ioremap.
+ */
+
+volatile unsigned long *port_cse1_addr;
+volatile unsigned long *port_csp0_addr;
+volatile unsigned long *port_csp4_addr;
+
diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
new file mode 100644
index 000000000..7122d9773
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -0,0 +1,438 @@
+/*
+ *  linux/arch/cris/kernel/signal.c
+ *
+ *  Based on arch/i386/kernel/signal.c by
+ *     Copyright (C) 1991, 1992  Linus Torvalds
+ *     1997-11-28  Modified for POSIX.1b signals by Richard Henderson *
+ *
+ *  Ideas also taken from arch/arm.
+ *
+ *  Copyright (C) 2000-2007 Axis Communications AB
+ *
+ *  Authors:  Bjorn Wesen (bjornw@axis.com)
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <arch/system.h>
+
+#define DEBUG_SIG 0
+
+/* a syscall in Linux/CRIS is a break 13 instruction which is 2 bytes */
+/* manipulate regs so that upon return, it will be re-executed */
+
+/* We rely on that pc points to the instruction after "break 13", so the
+ * library must never do strange things like putting it in a delay slot.
+ */
+#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2;
+
+void do_signal(int canrestart, struct pt_regs *regs);
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct sigframe {
+	struct sigcontext sc;
+	unsigned long extramask[_NSIG_WORDS-1];
+	unsigned char retcode[8];  /* trampoline code */
+};
+
+struct rt_sigframe {
+	struct siginfo *pinfo;
+	void *puc;
+	struct siginfo info;
+	struct ucontext uc;
+	unsigned char retcode[8];  /* trampoline code */
+};
+
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	unsigned int err = 0;
+	unsigned long old_usp;
+
+        /* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	/* restore the regs from &sc->regs (same as sc, since regs is first)
+	 * (sc is already checked for VERIFY_READ since the sigframe was
+	 *  checked in sys_sigreturn previously)
+	 */
+
+	if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
+                goto badframe;
+
+	/* make sure the U-flag is set so user-mode cannot fool us */
+
+	regs->dccr |= 1 << 8;
+
+	/* restore the old USP as it was before we stacked the sc etc.
+	 * (we cannot just pop the sigcontext since we aligned the sp and
+	 *  stuff after pushing it)
+	 */
+
+	err |= __get_user(old_usp, &sc->usp);
+
+	wrusp(old_usp);
+
+	/* TODO: the other ports use regs->orig_XX to disable syscall checks
+	 * after this completes, but we don't use that mechanism. maybe we can
+	 * use it now ?
+	 */
+
+	return err;
+
+badframe:
+	return 1;
+}
+
+asmlinkage int sys_sigreturn(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct sigframe __user *frame = (struct sigframe *)rdusp();
+	sigset_t set;
+
+        /*
+         * Since we stacked the signal on a dword boundary,
+         * then frame should be dword aligned here.  If it's
+         * not, then the user is trying to mess with us.
+         */
+        if (((long)frame) & 3)
+                goto badframe;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__get_user(set.sig[0], &frame->sc.oldmask)
+	    || (_NSIG_WORDS > 1
+		&& __copy_from_user(&set.sig[1], frame->extramask,
+				    sizeof(frame->extramask))))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->sc))
+		goto badframe;
+
+	/* TODO: SIGTRAP when single-stepping as in arm ? */
+
+	return regs->r10;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
+	sigset_t set;
+
+        /*
+         * Since we stacked the signal on a dword boundary,
+         * then frame should be dword aligned here.  If it's
+         * not, then the user is trying to mess with us.
+         */
+        if (((long)frame) & 3)
+                goto badframe;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return regs->r10;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int setup_sigcontext(struct sigcontext __user *sc,
+	struct pt_regs *regs, unsigned long mask)
+{
+	int err = 0;
+	unsigned long usp = rdusp();
+
+	/* copy the regs. they are first in sc so we can use sc directly */
+
+	err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
+
+        /* Set the frametype to CRIS_FRAME_NORMAL for the execution of
+           the signal handler. The frametype will be restored to its previous
+           value in restore_sigcontext. */
+        regs->frametype = CRIS_FRAME_NORMAL;
+
+	/* then some other stuff */
+
+	err |= __put_user(mask, &sc->oldmask);
+
+	err |= __put_user(usp, &sc->usp);
+
+	return err;
+}
+
+/* Figure out where we want to put the new signal frame
+ * - usually on the stack. */
+
+static inline void __user *
+get_sigframe(struct ksignal *ksig, size_t frame_size)
+{
+	unsigned long sp = sigsp(rdusp(), ksig);
+
+	/* make sure the frame is dword-aligned */
+
+	sp &= ~3;
+
+	return (void __user*)(sp - frame_size);
+}
+
+/* grab and setup a signal frame.
+ *
+ * basically we stack a lot of state info, and arrange for the
+ * user-mode program to return to the kernel using either a
+ * trampoline which performs the syscall sigreturn, or a provided
+ * user-mode trampoline.
+ */
+
+static int setup_frame(struct ksignal *ksig, sigset_t *set,
+		       struct pt_regs *regs)
+{
+	struct sigframe __user *frame;
+	unsigned long return_ip;
+	int err = 0;
+
+	frame = get_sigframe(ksig, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+	if (err)
+		return -EFAULT;
+
+	if (_NSIG_WORDS > 1) {
+		err |= __copy_to_user(frame->extramask, &set->sig[1],
+				      sizeof(frame->extramask));
+	}
+	if (err)
+		return -EFAULT;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		return_ip = (unsigned long)ksig->ka.sa.sa_restorer;
+	} else {
+		/* trampoline - the desired return ip is the retcode itself */
+		return_ip = (unsigned long)&frame->retcode;
+		/* This is movu.w __NR_sigreturn, r9; break 13; */
+		err |= __put_user(0x9c5f,         (short __user*)(frame->retcode+0));
+		err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2));
+		err |= __put_user(0xe93d,         (short __user*)(frame->retcode+4));
+	}
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+
+	regs->irp = (unsigned long) ksig->ka.sa.sa_handler;  /* what we enter NOW   */
+	regs->srp = return_ip;                          /* what we enter LATER */
+	regs->r10 = ksig->sig;                                /* first argument is signo */
+
+	/* actually move the usp to reflect the stacked frame */
+
+	wrusp((unsigned long)frame);
+
+	return 0;
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+			  struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	unsigned long return_ip;
+	int err = 0;
+
+	frame = get_sigframe(ksig, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		return -EFAULT;
+
+	err |= __put_user(&frame->info, &frame->pinfo);
+	err |= __put_user(&frame->uc, &frame->puc);
+	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+	if (err)
+		return -EFAULT;
+
+	/* Clear all the bits of the ucontext we don't use.  */
+        err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
+
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	err |= __save_altstack(&frame->uc.uc_stack, rdusp());
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up to return from userspace.  If provided, use a stub
+	   already in userspace.  */
+	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+		return_ip = (unsigned long)ksig->ka.sa.sa_restorer;
+	} else {
+		/* trampoline - the desired return ip is the retcode itself */
+		return_ip = (unsigned long)&frame->retcode;
+		/* This is movu.w __NR_rt_sigreturn, r9; break 13; */
+		err |= __put_user(0x9c5f, (short __user *)(frame->retcode+0));
+		err |= __put_user(__NR_rt_sigreturn,
+			(short __user *)(frame->retcode+2));
+		err |= __put_user(0xe93d, (short __user *)(frame->retcode+4));
+	}
+
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+
+	/* What we enter NOW   */
+	regs->irp = (unsigned long) ksig->ka.sa.sa_handler;
+	/* What we enter LATER */
+	regs->srp = return_ip;
+	/* First argument is signo */
+	regs->r10 = ksig->sig;
+	/* Second argument is (siginfo_t *) */
+	regs->r11 = (unsigned long)&frame->info;
+	/* Third argument is unused */
+	regs->r12 = 0;
+
+	/* Actually move the usp to reflect the stacked frame */
+	wrusp((unsigned long)frame);
+
+	return 0;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static inline void handle_signal(int canrestart, struct ksignal *ksig,
+				 struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+
+	/* Are we from a system call? */
+	if (canrestart) {
+		/* If so, check system call restarting.. */
+		switch (regs->r10) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			/* ERESTARTNOHAND means that the syscall should
+			 * only be restarted if there was no handler for
+			 * the signal, and since we only get here if there
+			 * is a handler, we don't restart */
+			regs->r10 = -EINTR;
+			break;
+		case -ERESTARTSYS:
+			/* ERESTARTSYS means to restart the syscall if
+			 * there is no handler or the handler was
+			 * registered with SA_RESTART */
+			if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
+				regs->r10 = -EINTR;
+				break;
+			}
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			/* ERESTARTNOINTR means that the syscall should
+			 * be called again after the signal handler returns. */
+			RESTART_CRIS_SYS(regs);
+		}
+	}
+
+	/* Set up the stack frame */
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		ret = setup_rt_frame(ksig, oldset, regs);
+	else
+		ret = setup_frame(ksig, oldset, regs);
+
+	signal_setup_done(ret, ksig, 0);
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Also note that the regs structure given here as an argument, is the latest
+ * pushed pt_regs. It may or may not be the same as the first pushed registers
+ * when the initial usermode->kernelmode transition took place. Therefore
+ * we can use user_mode(regs) to see if we came directly from kernel or user
+ * mode below.
+ */
+
+void do_signal(int canrestart, struct pt_regs *regs)
+{
+	struct ksignal ksig;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return;
+
+	if (get_signal(&ksig)) {
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(canrestart, &ksig, regs);
+		return;
+	}
+
+	/* Did we come from a system call? */
+	if (canrestart) {
+		/* Restart the system call - no handlers present */
+		if (regs->r10 == -ERESTARTNOHAND ||
+		    regs->r10 == -ERESTARTSYS ||
+		    regs->r10 == -ERESTARTNOINTR) {
+			RESTART_CRIS_SYS(regs);
+		}
+		if (regs->r10 == -ERESTART_RESTARTBLOCK) {
+			regs->r9 = __NR_restart_syscall;
+			regs->irp -= 2;
+		}
+	}
+
+	/* if there's no signal to deliver, we just put the saved sigmask
+	 * back */
+	restore_saved_sigmask();
+}
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
new file mode 100644
index 000000000..b5eb5cd2f
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -0,0 +1,267 @@
+/*
+ *  linux/arch/cris/arch-v10/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *  Copyright (C) 1999-2002 Axis Communications AB
+ *
+ */
+
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/swap.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/types.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq_regs.h>
+
+/* define this if you need to use print_timestamp */
+/* it will make jiffies at 96 hz instead of 100 hz though */
+#undef USE_CASCADE_TIMERS
+
+unsigned long get_ns_in_jiffie(void)
+{
+	unsigned char timer_count, t1;
+	unsigned short presc_count;
+	unsigned long ns;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	timer_count = *R_TIMER0_DATA;
+	presc_count = *R_TIM_PRESC_STATUS;
+	/* presc_count might be wrapped */
+	t1 = *R_TIMER0_DATA;
+
+	if (timer_count != t1){
+		/* it wrapped, read prescaler again...  */
+		presc_count = *R_TIM_PRESC_STATUS;
+		timer_count = t1;
+	}
+	local_irq_restore(flags);
+	if (presc_count >= PRESCALE_VALUE/2 ){
+		presc_count =  PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
+	} else {
+		presc_count =  PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
+	}
+
+	ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) +
+	     ( (presc_count) * (1000000000/PRESCALE_FREQ));
+	return ns;
+}
+
+static u32 cris_v10_gettimeoffset(void)
+{
+	u32 count;
+
+	/* The timer interrupt comes from Etrax timer 0. In order to get
+	 * better precision, we check the current value. It might have
+	 * underflowed already though.
+	 */
+	count = *R_TIMER0_DATA;
+
+	/* Convert timer value to nsec */
+	return (TIMER0_DIV - count) * (NSEC_PER_SEC/HZ)/TIMER0_DIV;
+}
+
+/* Excerpt from the Etrax100 HSDD about the built-in watchdog:
+ *
+ * 3.10.4 Watchdog timer
+
+ * When the watchdog timer is started, it generates an NMI if the watchdog
+ * isn't restarted or stopped within 0.1 s. If it still isn't restarted or
+ * stopped after an additional 3.3 ms, the watchdog resets the chip.
+ * The watchdog timer is stopped after reset. The watchdog timer is controlled
+ * by the R_WATCHDOG register. The R_WATCHDOG register contains an enable bit
+ * and a 3-bit key value. The effect of writing to the R_WATCHDOG register is
+ * described in the table below:
+ *
+ *   Watchdog    Value written:
+ *   state:      To enable:  To key:      Operation:
+ *   --------    ----------  -------      ----------
+ *   stopped         0         X          No effect.
+ *   stopped         1       key_val      Start watchdog with key = key_val.
+ *   started         0       ~key         Stop watchdog
+ *   started         1       ~key         Restart watchdog with key = ~key.
+ *   started         X       new_key_val  Change key to new_key_val.
+ *
+ * Note: '~' is the bitwise NOT operator.
+ *
+ */
+
+/* right now, starting the watchdog is the same as resetting it */
+#define start_watchdog reset_watchdog
+
+#ifdef CONFIG_ETRAX_WATCHDOG
+static int watchdog_key = 0;  /* arbitrary number */
+#endif
+
+/* number of pages to consider "out of memory". it is normal that the memory
+ * is used though, so put this really low.
+ */
+
+#define WATCHDOG_MIN_FREE_PAGES 8
+
+void reset_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	/* only keep watchdog happy as long as we have memory left! */
+	if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
+		/* reset the watchdog with the inverse of the old key */
+		watchdog_key ^= 0x7; /* invert key, which is 3 bits */
+		*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) |
+			IO_STATE(R_WATCHDOG, enable, start);
+	}
+#endif
+}
+
+/* stop the watchdog - we still need the correct key */
+
+void stop_watchdog(void)
+{
+#ifdef CONFIG_ETRAX_WATCHDOG
+	watchdog_key ^= 0x7; /* invert key, which is 3 bits */
+	*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) |
+		IO_STATE(R_WATCHDOG, enable, stop);
+#endif
+}
+
+
+extern void cris_do_profile(struct pt_regs *regs);
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "xtime_update()" routine every clocktick
+ */
+static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	/* acknowledge the timer irq */
+
+#ifdef USE_CASCADE_TIMERS
+	*R_TIMER_CTRL =
+		IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
+		IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
+		IO_STATE( R_TIMER_CTRL, i1, clr) |
+		IO_STATE( R_TIMER_CTRL, tm1, run) |
+		IO_STATE( R_TIMER_CTRL, clksel1, cascade0) |
+		IO_STATE( R_TIMER_CTRL, i0, clr) |
+		IO_STATE( R_TIMER_CTRL, tm0, run) |
+		IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
+#else
+	*R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i0, clr);
+#endif
+
+	/* reset watchdog otherwise it resets us! */
+	reset_watchdog();
+
+	/* Update statistics. */
+	update_process_times(user_mode(regs));
+
+	/* call the real timer interrupt handler */
+	xtime_update(1);
+
+        cris_do_profile(regs); /* Save profiling information */
+        return IRQ_HANDLED;
+}
+
+/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain */
+
+static struct irqaction irq2  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_SHARED,
+	.name = "timer",
+};
+
+void __init time_init(void)
+{
+	arch_gettimeoffset = cris_v10_gettimeoffset;
+
+	/* probe for the RTC and read it if it exists
+	 * Before the RTC can be probed the loops_per_usec variable needs
+	 * to be initialized to make usleep work. A better value for
+	 * loops_per_usec is calculated by the kernel later once the
+	 * clock has started.
+	 */
+	loops_per_usec = 50;
+
+	/* Setup the etrax timers
+	 * Base frequency is 25000 hz, divider 250 -> 100 HZ
+	 * In normal mode, we use timer0, so timer1 is free. In cascade
+	 * mode (which we sometimes use for debugging) both timers are used.
+	 * Remember that linux/timex.h contains #defines that rely on the
+	 * timer settings below (hz and divide factor) !!!
+	 */
+
+#ifdef USE_CASCADE_TIMERS
+	*R_TIMER_CTRL =
+		IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
+		IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
+		IO_STATE( R_TIMER_CTRL, i1, nop) |
+		IO_STATE( R_TIMER_CTRL, tm1, stop_ld) |
+		IO_STATE( R_TIMER_CTRL, clksel1, cascade0) |
+		IO_STATE( R_TIMER_CTRL, i0, nop) |
+		IO_STATE( R_TIMER_CTRL, tm0, stop_ld) |
+		IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
+
+	*R_TIMER_CTRL = r_timer_ctrl_shadow =
+		IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
+		IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
+		IO_STATE( R_TIMER_CTRL, i1, nop) |
+		IO_STATE( R_TIMER_CTRL, tm1, run) |
+		IO_STATE( R_TIMER_CTRL, clksel1, cascade0) |
+		IO_STATE( R_TIMER_CTRL, i0, nop) |
+		IO_STATE( R_TIMER_CTRL, tm0, run) |
+		IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
+#else
+	*R_TIMER_CTRL =
+		IO_FIELD(R_TIMER_CTRL, timerdiv1, 192)      |
+		IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV)      |
+		IO_STATE(R_TIMER_CTRL, i1,        nop)      |
+		IO_STATE(R_TIMER_CTRL, tm1,       stop_ld)  |
+		IO_STATE(R_TIMER_CTRL, clksel1,   c19k2Hz)  |
+		IO_STATE(R_TIMER_CTRL, i0,        nop)      |
+		IO_STATE(R_TIMER_CTRL, tm0,       stop_ld)  |
+		IO_STATE(R_TIMER_CTRL, clksel0,   flexible);
+
+	*R_TIMER_CTRL = r_timer_ctrl_shadow =
+		IO_FIELD(R_TIMER_CTRL, timerdiv1, 192)      |
+		IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV)      |
+		IO_STATE(R_TIMER_CTRL, i1,        nop)      |
+		IO_STATE(R_TIMER_CTRL, tm1,       run)      |
+		IO_STATE(R_TIMER_CTRL, clksel1,   c19k2Hz)  |
+		IO_STATE(R_TIMER_CTRL, i0,        nop)      |
+		IO_STATE(R_TIMER_CTRL, tm0,       run)      |
+		IO_STATE(R_TIMER_CTRL, clksel0,   flexible);
+
+	*R_TIMER_PRESCALE = PRESCALE_VALUE;
+#endif
+
+	/* unmask the timer irq */
+	*R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer0, set);
+
+	/* now actually register the irq handler that calls timer_interrupt() */
+	setup_irq(2, &irq2); /* irq 2 is the timer0 irq in etrax */
+
+	/* enable watchdog if we should use one */
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	printk("Enabling watchdog...\n");
+	start_watchdog();
+
+	/* If we use the hardware watchdog, we want to trap it as an NMI
+	   and dump registers before it resets us.  For this to happen, we
+	   must set the "m" NMI enable flag (which once set, is unset only
+	   when an NMI is taken).
+
+	   The same goes for the external NMI, but that doesn't have any
+	   driver or infrastructure support yet.  */
+	asm ("setf m");
+
+	*R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set);
+	*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, nmi, set);
+#endif
+}
diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c
new file mode 100644
index 000000000..7001beda7
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/traps.c
@@ -0,0 +1,131 @@
+/*
+ * Helper functions for trap handlers
+ *
+ * Copyright (C) 2000-2007, Axis Communications AB.
+ *
+ * Authors:   Bjorn Wesen
+ *            Hans-Peter Nilsson
+ *
+ */
+
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+#include <arch/sv_addr_ag.h>
+#include <arch/system.h>
+
+void
+show_registers(struct pt_regs *regs)
+{
+	/*
+	 * It's possible to use either the USP register or current->thread.usp.
+	 * USP might not correspond to the current process for all cases this
+	 * function is called, and current->thread.usp isn't up to date for the
+	 * current process. Experience shows that using USP is the way to go.
+	 */
+	unsigned long usp = rdusp();
+
+	printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+	       regs->irp, regs->srp, regs->dccr, usp, regs->mof);
+
+	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+	       regs->r0, regs->r1, regs->r2, regs->r3);
+
+	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+	       regs->r4, regs->r5, regs->r6, regs->r7);
+
+	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+	       regs->r8, regs->r9, regs->r10, regs->r11);
+
+	printk("r12: %08lx r13: %08lx oR10: %08lx  sp: %08lx\n",
+	       regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs);
+
+	printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
+
+	printk("Process %s (pid: %d, stackpage=%08lx)\n",
+	       current->comm, current->pid, (unsigned long)current);
+
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (!user_mode(regs)) {
+		int i;
+
+		show_stack(NULL, (unsigned long *)usp);
+
+		/*
+		 * If the previous stack-dump wasn't a kernel one, dump the
+		 * kernel stack now.
+		 */
+		if (usp != 0)
+			show_stack(NULL, NULL);
+
+		printk("\nCode: ");
+
+		if (regs->irp < PAGE_OFFSET)
+			goto bad_value;
+
+		/*
+		 * Quite often the value at regs->irp doesn't point to the
+		 * interesting instruction, which often is the previous
+		 * instruction. So dump at an offset large enough that the
+		 * instruction decoding should be in sync at the interesting
+		 * point, but small enough to fit on a row. The regs->irp
+		 * location is pointed out in a ksymoops-friendly way by
+		 * wrapping the byte for that address in parenthesises.
+		 */
+		for (i = -12; i < 12; i++) {
+			unsigned char c;
+
+			if (__get_user(c, &((unsigned char *)regs->irp)[i])) {
+bad_value:
+				printk(" Bad IP value.");
+				break;
+			}
+
+			if (i == 0)
+				printk("(%02x) ", c);
+			else
+				printk("%02x ", c);
+		}
+		printk("\n");
+	}
+}
+
+void
+arch_enable_nmi(void)
+{
+	asm volatile ("setf m");
+}
+
+extern void (*nmi_handler)(struct pt_regs *);
+void handle_nmi(struct pt_regs *regs)
+{
+	if (nmi_handler)
+		nmi_handler(regs);
+
+	/* Wait until nmi is no longer active. (We enable NMI immediately after
+	   returning from this function, and we don't want it happening while
+	   exiting from the NMI interrupt handler.) */
+	while (*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active))
+		;
+}
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+void
+handle_BUG(struct pt_regs *regs)
+{
+	struct bug_frame f;
+	unsigned char c;
+	unsigned long irp = regs->irp;
+
+	if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f))
+		return;
+	if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC)
+		return;
+	if (__get_user(c, f.filename))
+		f.filename = "<bad filename>";
+
+	printk("kernel BUG at %s:%d!\n", f.filename, f.line);
+}
+#endif
diff --git a/arch/cris/arch-v10/lib/Makefile b/arch/cris/arch-v10/lib/Makefile
new file mode 100644
index 000000000..725153edb
--- /dev/null
+++ b/arch/cris/arch-v10/lib/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Etrax-specific library files..
+#
+
+lib-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o
+
diff --git a/arch/cris/arch-v10/lib/checksum.S b/arch/cris/arch-v10/lib/checksum.S
new file mode 100644
index 000000000..7d552f4bd
--- /dev/null
+++ b/arch/cris/arch-v10/lib/checksum.S
@@ -0,0 +1,118 @@
+/*
+ * A fast checksum routine using movem
+ * Copyright (c) 1998-2001 Axis Communications AB
+ *
+ * csum_partial(const unsigned char * buff, int len, unsigned int sum)
+ */
+
+	.globl	csum_partial
+csum_partial:
+	
+	;; r10 - src
+	;; r11 - length
+	;; r12 - checksum
+
+	;; check for breakeven length between movem and normal word looping versions
+	;; we also do _NOT_ want to compute a checksum over more than the 
+	;; actual length when length < 40
+	
+	cmpu.w	80,$r11
+	blo	_word_loop
+	nop
+
+	;; need to save the registers we use below in the movem loop
+	;; this overhead is why we have a check above for breakeven length
+	;; only r0 - r8 have to be saved, the other ones are clobber-able
+	;; according to the ABI
+	
+	subq	9*4,$sp
+	movem	$r8,[$sp]
+	
+	;; do a movem checksum
+
+	subq	10*4,$r11	; update length for the first loop
+	
+_mloop:	movem	[$r10+],$r9	; read 10 longwords
+
+	;; perform dword checksumming on the 10 longwords
+	
+	add.d	$r0,$r12
+	ax
+	add.d	$r1,$r12
+	ax
+	add.d	$r2,$r12
+	ax
+	add.d	$r3,$r12
+	ax
+	add.d	$r4,$r12
+	ax
+	add.d	$r5,$r12
+	ax
+	add.d	$r6,$r12
+	ax
+	add.d	$r7,$r12
+	ax
+	add.d	$r8,$r12
+	ax
+	add.d	$r9,$r12
+
+	;; fold the carry into the checksum, to avoid having to loop the carry
+	;; back into the top
+	
+	ax
+	addq	0,$r12
+
+	subq	10*4,$r11
+	bge	_mloop
+	nop
+
+	addq	10*4,$r11	; compensate for last loop underflowing length
+
+	movem	[$sp+],$r8	; restore regs
+
+_word_loop:
+	;; only fold if there is anything to fold.
+
+	cmpq	0,$r12
+	beq	_no_fold
+
+	;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below.
+	;; r9 and r13 can be used as temporaries.
+	
+	moveq	-1,$r9		; put 0xffff in r9, faster than move.d 0xffff,r9
+	lsrq	16,$r9
+	
+	move.d	$r12,$r13
+	lsrq	16,$r13		; r13 = checksum >> 16
+	and.d	$r9,$r12		; checksum = checksum & 0xffff
+	add.d	$r13,$r12		; checksum += r13
+
+_no_fold:
+	cmpq	2,$r11
+	blt	_no_words
+	nop
+	
+	;; checksum the rest of the words
+	
+	subq	2,$r11
+	
+_wloop:	subq	2,$r11
+	bge	_wloop
+	addu.w	[$r10+],$r12
+	
+	addq	2,$r11
+		
+_no_words:
+	;; see if we have one odd byte more
+	cmpq	1,$r11
+	beq	_do_byte
+	nop
+	ret
+	move.d	$r12, $r10
+
+_do_byte:	
+	;; copy and checksum the last byte
+	addu.b	[$r10],$r12
+	ret
+	move.d	$r12, $r10
+		
diff --git a/arch/cris/arch-v10/lib/checksumcopy.S b/arch/cris/arch-v10/lib/checksumcopy.S
new file mode 100644
index 000000000..540db8a5f
--- /dev/null
+++ b/arch/cris/arch-v10/lib/checksumcopy.S
@@ -0,0 +1,126 @@
+/*
+ * A fast checksum+copy routine using movem
+ * Copyright (c) 1998, 2001 Axis Communications AB
+ *
+ * Authors:	Bjorn Wesen
+ * 
+ * csum_partial_copy_nocheck(const char *src, char *dst,
+ *		             int len, unsigned int sum)
+ */
+
+	.globl	csum_partial_copy_nocheck
+csum_partial_copy_nocheck:	
+	
+	;; r10 - src
+	;; r11 - dst
+	;; r12 - length
+	;; r13 - checksum
+
+	;; check for breakeven length between movem and normal word looping versions
+	;; we also do _NOT_ want to compute a checksum over more than the 
+	;; actual length when length < 40
+	
+	cmpu.w	80, $r12
+	blo	_word_loop
+	nop
+
+	;; need to save the registers we use below in the movem loop
+	;; this overhead is why we have a check above for breakeven length
+	;; only r0 - r8 have to be saved, the other ones are clobber-able
+	;; according to the ABI
+	
+	subq	9*4, $sp
+	movem	$r8, [$sp]
+	
+	;; do a movem copy and checksum
+
+	subq	10*4, $r12	; update length for the first loop
+	
+_mloop:	movem	[$r10+],$r9	; read 10 longwords
+1:	;; A failing userspace access will have this as PC.
+	movem	$r9,[$r11+]	; write 10 longwords
+
+	;; perform dword checksumming on the 10 longwords
+	
+	add.d	$r0,$r13
+	ax
+	add.d	$r1,$r13
+	ax
+	add.d	$r2,$r13
+	ax
+	add.d	$r3,$r13
+	ax
+	add.d	$r4,$r13
+	ax
+	add.d	$r5,$r13
+	ax
+	add.d	$r6,$r13
+	ax
+	add.d	$r7,$r13
+	ax
+	add.d	$r8,$r13
+	ax
+	add.d	$r9,$r13
+
+	;; fold the carry into the checksum, to avoid having to loop the carry
+	;; back into the top
+	
+	ax
+	addq	0,$r13
+
+	subq	10*4,$r12
+	bge	_mloop
+	nop
+
+	addq	10*4,$r12	; compensate for last loop underflowing length
+
+	movem	[$sp+],$r8	; restore regs
+
+_word_loop:
+	;; only fold if there is anything to fold.
+
+	cmpq	0,$r13
+	beq	_no_fold
+
+	;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below
+	;; r9 can be used as temporary.
+	
+	move.d	$r13,$r9
+	lsrq	16,$r9		; r0 = checksum >> 16
+	and.d	0xffff,$r13	; checksum = checksum & 0xffff
+	add.d	$r9,$r13	; checksum += r0
+	
+_no_fold:
+	cmpq	2,$r12
+	blt	_no_words
+	nop
+	
+	;; copy and checksum the rest of the words
+	
+	subq	2,$r12
+	
+_wloop:	move.w	[$r10+],$r9
+2:	;; A failing userspace access will have this as PC.
+	addu.w	$r9,$r13
+	subq	2,$r12
+	bge	_wloop
+	move.w	$r9,[$r11+]
+	
+	addq	2,$r12
+		
+_no_words:
+	;; see if we have one odd byte more
+	cmpq	1,$r12
+	beq	_do_byte
+	nop
+	ret
+	move.d	$r13, $r10
+
+_do_byte:	
+	;; copy and checksum the last byte
+	move.b	[$r10],$r9
+3:	;; A failing userspace access will have this as PC.
+	addu.b	$r9,$r13
+	move.b	$r9,[$r11]
+	ret
+	move.d	$r13, $r10
diff --git a/arch/cris/arch-v10/lib/csumcpfruser.S b/arch/cris/arch-v10/lib/csumcpfruser.S
new file mode 100644
index 000000000..5f41ccd62
--- /dev/null
+++ b/arch/cris/arch-v10/lib/csumcpfruser.S
@@ -0,0 +1,64 @@
+/*
+ * Add-on to transform csum_partial_copy_nocheck in checksumcopy.S into
+ * csum_partial_copy_from_user by adding exception records.
+ *
+ * Copyright (C) 2001 Axis Communications AB.
+ *
+ * Author: Hans-Peter Nilsson.
+ */
+
+#include <asm/errno.h>
+
+/* Same function body, but a different name.  If we just added exception
+   records to _csum_partial_copy_nocheck and made it generic, we wouldn't
+   know a user fault from a kernel fault and we would have overhead in
+   each kernel caller for the error-pointer argument.
+
+   unsigned int csum_partial_copy_from_user
+     (const char *src, char *dst, int len, unsigned int sum, int *errptr);
+
+   Note that the errptr argument is only set if we encounter an error.
+   It is conveniently located on the stack, so the normal function body
+   does not have to handle it.  */
+
+#define csum_partial_copy_nocheck csum_partial_copy_from_user
+
+/* There are local labels numbered 1, 2 and 3 present to mark the
+   different from-user accesses.  */
+#include "checksumcopy.S"
+
+	.section .fixup,"ax"
+
+;; Here from the movem loop; restore stack.
+4:
+	movem	[$sp+],$r8
+;; r12 is already decremented.  Add back chunk_size-2.
+	addq	40-2,$r12
+
+;; Here from the word loop; r12 is off by 2; add it back.
+5:
+	addq	2,$r12
+
+;; Here from a failing single byte.
+6:
+
+;; Signal in *errptr that we had a failing access.
+	moveq	-EFAULT,$r9
+	move.d	$r9,[[$sp]]
+
+;; Clear the rest of the destination area using memset.  Preserve the
+;; checksum for the readable bytes.
+	push	$srp
+	push	$r13
+	move.d	$r11,$r10
+	clear.d	$r11
+	jsr	memset
+	pop	$r10
+	jump	[$sp+]
+
+	.previous
+	.section __ex_table,"a"
+	.dword 1b,4b
+	.dword 2b,5b
+	.dword 3b,6b
+	.previous
diff --git a/arch/cris/arch-v10/lib/dmacopy.c b/arch/cris/arch-v10/lib/dmacopy.c
new file mode 100644
index 000000000..49f5b8ca5
--- /dev/null
+++ b/arch/cris/arch-v10/lib/dmacopy.c
@@ -0,0 +1,42 @@
+/*
+ * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
+ */
+
+#include <asm/svinto.h>
+#include <asm/io.h>
+
+#define D(x)
+
+void *dma_memcpy(void *pdst,
+		 const void *psrc,
+		 unsigned int pn)
+{
+	static etrax_dma_descr indma, outdma;
+
+	D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn));
+
+#if 0
+	*R_GEN_CONFIG = genconfig_shadow =
+		(genconfig_shadow & ~0x3c0000) |
+		IO_STATE(R_GEN_CONFIG, dma6, intdma7) |
+		IO_STATE(R_GEN_CONFIG, dma7, intdma6);
+#endif
+	indma.sw_len = outdma.sw_len = pn;
+	indma.ctrl = d_eol | d_eop;
+	outdma.ctrl = d_eol;
+	indma.buf = psrc;
+	outdma.buf = pdst;
+
+	*R_DMA_CH6_FIRST = &indma;
+	*R_DMA_CH7_FIRST = &outdma;
+	*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
+	*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
+
+	while (*R_DMA_CH7_CMD == 1)
+		/* wait for completion */;
+
+	D(printk(KERN_DEBUG "done\n"));
+}
+
+
+
diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S
new file mode 100644
index 000000000..e541d3d8f
--- /dev/null
+++ b/arch/cris/arch-v10/lib/dram_init.S
@@ -0,0 +1,146 @@
+/*
+ * DRAM/SDRAM initialization - alter with care
+ * This file is intended to be included from other assembler files
+ *
+ * Note: This file may not modify r9 because r9 is used to carry
+ *       information from the decompresser to the kernel
+ *
+ * Copyright (C) 2000-2012 Axis Communications AB
+ *
+ */
+
+/* Just to be certain the config file is included, we include it here
+ * explicitly instead of depending on it being included in the file that
+ * uses this code.
+ */
+
+
+	;; WARNING! The registers r8 and r9 are used as parameters carrying
+	;; information from the decompressor (if the kernel was compressed).
+	;; They should not be used in the code below.
+
+	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
+	move.d   $r0, [R_WAITSTATES]
+
+	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
+	move.d   $r0, [R_BUS_CONFIG]
+
+#ifndef CONFIG_ETRAX_SDRAM
+	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
+	move.d   $r0, [R_DRAM_CONFIG]
+
+	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
+	move.d   $r0, [R_DRAM_TIMING]
+#else
+	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
+	moveq    2, $r6	
+_sdram_init:
+
+	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
+
+	; Bank configuration
+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0
+	move.d   $r0, [R_SDRAM_CONFIG]
+
+	; Calculate value of mrs_data
+	; CAS latency = 2 && bus_width = 32 => 0x40
+	; CAS latency = 3 && bus_width = 32 => 0x60
+	; CAS latency = 2 && bus_width = 16 => 0x20
+	; CAS latency = 3 && bus_width = 16 => 0x30
+
+	; Check if value is already supplied in kernel config
+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2
+	and.d    0x00ff0000, $r2
+	bne	 _set_timing
+	lsrq     16, $r2
+
+	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
+	move.d   $r1, $r3
+	and.d    0x03, $r1       ; Get CAS latency
+	and.d    0x1000, $r3     ; 50 or 100 MHz?
+	beq      _speed_50
+	nop
+_speed_100:
+	cmp.d    0x00, $r1	; CAS latency = 2?
+	beq      _bw_check
+	nop
+	or.d     0x20, $r2	; CAS latency = 3
+	ba       _bw_check
+	nop
+_speed_50:
+	cmp.d    0x01, $r1	; CAS latency = 2?
+	beq      _bw_check
+	nop
+	or.d     0x20, $r2       ; CAS latency = 3
+_bw_check:
+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1
+	and.d    0x800000, $r1	; DRAM width is bit 23
+	bne      _set_timing
+	nop
+	lsrq     1, $r2		;  16 bits. Shift down value.
+
+	; Set timing parameters. Starts master clock
+_set_timing:
+	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
+	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0
+	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
+	move.d   $r1, $r5
+	or.d     0x0000c000, $r1 ; ref = disable
+	lslq     16, $r2		; mrs data starts at bit 16
+	or.d     $r2, $r1
+	move.d   $r1, [R_SDRAM_TIMING]
+
+	; Wait 200us
+	move.d   10000, $r2
+1:	bne      1b
+	subq     1, $r2
+
+	; Issue initialization command sequence
+	move.d   _sdram_commands_start, $r2
+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
+	move.d   _sdram_commands_end,  $r3
+	and.d    0x000fffff, $r3
+1:	clear.d  $r4
+	move.b   [$r2+], $r4
+	lslq     9, $r4	; Command starts at bit 9
+	or.d     $r1, $r4
+	move.d   $r4, [R_SDRAM_TIMING]
+	nop		; Wait five nop cycles between each command
+	nop
+	nop
+	nop
+	nop
+	cmp.d    $r2, $r3
+	bne      1b
+	nop
+	move.d   $r5, [R_SDRAM_TIMING]
+	subq     1, $r6
+	bne      _sdram_init
+	nop
+	ba       _sdram_commands_end
+	nop
+
+_sdram_commands_start:
+	.byte   3	; Precharge
+	.byte   0       ; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   2	; refresh
+	.byte   0	; nop
+	.byte   1	; mrs
+	.byte   0	; nop
+_sdram_commands_end:
+#endif
diff --git a/arch/cris/arch-v10/lib/hw_settings.S b/arch/cris/arch-v10/lib/hw_settings.S
new file mode 100644
index 000000000..c09f19f47
--- /dev/null
+++ b/arch/cris/arch-v10/lib/hw_settings.S
@@ -0,0 +1,60 @@
+/*
+ * This table is used by some tools to extract hardware parameters.
+ * The table should be included in the kernel and the decompressor.
+ * Don't forget to update the tools if you change this table.
+ *
+ * Copyright (C) 2001 Axis Communications AB
+ *
+ * Authors:  Mikael Starvik (starvik@axis.com)
+ */
+
+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
+		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
+		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
+		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
+
+	.ascii "HW_PARAM_MAGIC" ; Magic number
+	.dword 0xc0004000	; Kernel start address
+
+	; Debug port
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	.dword 0
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+	.dword 1
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+	.dword 2
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+	.dword 3
+#else
+	.dword 4 ; No debug
+#endif
+
+	; SDRAM or EDO DRAM?
+#ifdef CONFIG_ETRAX_SDRAM
+	.dword 1
+#else
+	.dword 0
+#endif
+
+	; Register values
+	.dword R_WAITSTATES
+	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
+	.dword R_BUS_CONFIG
+	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
+#ifdef CONFIG_ETRAX_SDRAM
+	.dword R_SDRAM_CONFIG
+	.dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
+	.dword R_SDRAM_TIMING
+	.dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
+#else
+	.dword R_DRAM_CONFIG
+	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
+	.dword R_DRAM_TIMING
+	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
+#endif
+	.dword R_PORT_PA_SET
+	.dword PA_SET_VALUE
+	.dword R_PORT_PB_SET
+	.dword PB_SET_VALUE
+	.dword 0 ; No more register values
diff --git a/arch/cris/arch-v10/lib/memset.c b/arch/cris/arch-v10/lib/memset.c
new file mode 100644
index 000000000..c94ea9b3e
--- /dev/null
+++ b/arch/cris/arch-v10/lib/memset.c
@@ -0,0 +1,259 @@
+/* A memset for CRIS.
+   Copyright (C) 1999-2005 Axis Communications.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   1. Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+   2. Neither the name of Axis Communications nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+   COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+   IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* FIXME: This file should really only be used for reference, as the
+   result is somewhat depending on gcc generating what we expect rather
+   than what we describe.  An assembly file should be used instead.  */
+
+/* Note the multiple occurrence of the expression "12*4", including the
+   asm.  It is hard to get it into the asm in a good way.  Thus better to
+   expose the problem everywhere: no macro.  */
+
+/* Assuming one cycle per dword written or read (ok, not really true; the
+   world is not ideal), and one cycle per instruction, then 43+3*(n/48-1)
+   <= 24+24*(n/48-1) so n >= 45.7; n >= 0.9; we win on the first full
+   48-byte block to set.  */
+
+#define MEMSET_BY_BLOCK_THRESHOLD (1 * 48)
+
+/* No name ambiguities in this file.  */
+__asm__ (".syntax no_register_prefix");
+
+void *memset(void *pdst, int c, unsigned int plen)
+{
+  /* Now we want the parameters in special registers.  Make sure the
+     compiler does something usable with this.  */
+
+  register char *return_dst __asm__ ("r10") = pdst;
+  register int n __asm__ ("r12") = plen;
+  register int lc __asm__ ("r11") = c;
+
+  /* Most apps use memset sanely.  Memsetting about 3..4 bytes or less get
+     penalized here compared to the generic implementation.  */
+
+  /* This is fragile performancewise at best.  Check with newer GCC
+     releases, if they compile cascaded "x |= x << 8" to sane code.  */
+  __asm__("movu.b %0,r13						\n\
+	   lslq 8,r13							\n\
+	   move.b %0,r13						\n\
+	   move.d r13,%0						\n\
+	   lslq 16,r13							\n\
+	   or.d r13,%0"
+          : "=r" (lc)		/* Inputs.  */
+	  : "0" (lc)		/* Outputs.  */
+	  : "r13");		/* Trash.  */
+
+  {
+    register char *dst __asm__ ("r13") = pdst;
+
+    if (((unsigned long) pdst & 3) != 0
+	/* Oops! n = 0 must be a valid call, regardless of alignment.  */
+	&& n >= 3)
+      {
+	if ((unsigned long) dst & 1)
+	  {
+	    *dst = (char) lc;
+	    n--;
+	    dst++;
+	  }
+
+	if ((unsigned long) dst & 2)
+	  {
+	    *(short *) dst = lc;
+	    n -= 2;
+	    dst += 2;
+	  }
+      }
+
+    /* Decide which setting method to use.  */
+    if (n >= MEMSET_BY_BLOCK_THRESHOLD)
+      {
+	/* It is not optimal to tell the compiler about clobbering any
+	   registers; that will move the saving/restoring of those registers
+	   to the function prologue/epilogue, and make non-block sizes
+	   suboptimal.  */
+	__asm__ volatile
+	  ("\
+	   ;; GCC does promise correct register allocations, but let's	\n\
+	   ;; make sure it keeps its promises.				\n\
+	   .ifnc %0-%1-%4,$r13-$r12-$r11				\n\
+	   .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\"	\n\
+	   .endif							\n\
+									\n\
+	   ;; Save the registers we'll clobber in the movem process	\n\
+	   ;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	   ;; upset.							\n\
+	   subq	   11*4,sp						\n\
+	   movem   r10,[sp]						\n\
+									\n\
+	   move.d  r11,r0						\n\
+	   move.d  r11,r1						\n\
+	   move.d  r11,r2						\n\
+	   move.d  r11,r3						\n\
+	   move.d  r11,r4						\n\
+	   move.d  r11,r5						\n\
+	   move.d  r11,r6						\n\
+	   move.d  r11,r7						\n\
+	   move.d  r11,r8						\n\
+	   move.d  r11,r9						\n\
+	   move.d  r11,r10						\n\
+									\n\
+	   ;; Now we've got this:					\n\
+	   ;; r13 - dst							\n\
+	   ;; r12 - n							\n\
+									\n\
+	   ;; Update n for the first loop				\n\
+	   subq	   12*4,r12						\n\
+0:									\n\
+"
+#ifdef __arch_common_v10_v32
+	   /* Cater to branch offset difference between v32 and v10.  We
+	      assume the branch below has an 8-bit offset.  */
+"	   setf\n"
+#endif
+"	   subq	  12*4,r12						\n\
+	   bge	   0b							\n\
+	   movem	r11,[r13+]					\n\
+									\n\
+	   ;; Compensate for last loop underflowing n.			\n\
+	   addq	  12*4,r12						\n\
+									\n\
+	   ;; Restore registers from stack.				\n\
+	   movem [sp+],r10"
+
+	   /* Outputs.	*/
+	   : "=r" (dst), "=r" (n)
+
+	   /* Inputs.  */
+	   : "0" (dst), "1" (n), "r" (lc));
+      }
+
+    /* An ad-hoc unroll, used for 4*12-1..16 bytes. */
+    while (n >= 16)
+      {
+	*(long *) dst = lc; dst += 4;
+	*(long *) dst = lc; dst += 4;
+	*(long *) dst = lc; dst += 4;
+	*(long *) dst = lc; dst += 4;
+	n -= 16;
+      }
+
+    switch (n)
+      {
+      case 0:
+        break;
+
+      case 1:
+        *dst = (char) lc;
+        break;
+
+      case 2:
+        *(short *) dst = (short) lc;
+        break;
+
+      case 3:
+        *(short *) dst = (short) lc; dst += 2;
+        *dst = (char) lc;
+        break;
+
+      case 4:
+        *(long *) dst = lc;
+        break;
+
+      case 5:
+        *(long *) dst = lc; dst += 4;
+        *dst = (char) lc;
+        break;
+
+      case 6:
+        *(long *) dst = lc; dst += 4;
+        *(short *) dst = (short) lc;
+        break;
+
+      case 7:
+        *(long *) dst = lc; dst += 4;
+        *(short *) dst = (short) lc; dst += 2;
+        *dst = (char) lc;
+        break;
+
+      case 8:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc;
+        break;
+
+      case 9:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *dst = (char) lc;
+        break;
+
+      case 10:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(short *) dst = (short) lc;
+        break;
+
+      case 11:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(short *) dst = (short) lc; dst += 2;
+        *dst = (char) lc;
+        break;
+
+      case 12:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc;
+        break;
+
+      case 13:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *dst = (char) lc;
+        break;
+
+      case 14:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(short *) dst = (short) lc;
+        break;
+
+      case 15:
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(long *) dst = lc; dst += 4;
+        *(short *) dst = (short) lc; dst += 2;
+        *dst = (char) lc;
+        break;
+      }
+  }
+
+  return return_dst;
+}
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
new file mode 100644
index 000000000..8f79163f1
--- /dev/null
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -0,0 +1,86 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		IP/TCP/UDP checksumming routines
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Tom May, <ftom@netcom.com>
+ *		Lots of code moved from tcp.c and ip.c; see those files
+ *		for more names.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#include <net/checksum.h>
+#include <net/module.h>
+
+#undef PROFILE_CHECKSUM
+
+#ifdef PROFILE_CHECKSUM
+/* these are just for profiling the checksum code with an oscillioscope.. uh */
+#if 0
+#define BITOFF *((unsigned char *)0xb0000030) = 0xff
+#define BITON *((unsigned char *)0xb0000030) = 0x0
+#endif
+#include <asm/io.h>
+#define CBITON LED_ACTIVE_SET(1)
+#define CBITOFF LED_ACTIVE_SET(0)
+#define BITOFF
+#define BITON
+#else
+#define BITOFF
+#define BITON
+#define CBITOFF
+#define CBITON
+#endif
+
+/*
+ * computes a partial checksum, e.g. for TCP/UDP fragments
+ */
+
+#include <asm/delay.h>
+
+__wsum csum_partial(const void *p, int len, __wsum __sum)
+{
+	u32 sum = (__force u32)__sum;
+	const u16 *buff = p;
+	/*
+	* Experiments with ethernet and slip connections show that buff
+	* is aligned on either a 2-byte or 4-byte boundary.
+	*/
+	const void *endMarker = p + len;
+	const void *marker = endMarker - (len % 16);
+#if 0
+	if((int)buff & 0x3)
+		printk("unaligned buff %p\n", buff);
+	__delay(900); /* extra delay of 90 us to test performance hit */
+#endif
+	BITON;
+	while (buff < marker) {
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+	}
+	marker = endMarker - (len % 2);
+	while (buff < marker)
+		sum += *buff++;
+
+	if (endMarker > buff)
+		sum += *(const u8 *)buff;	/* add extra byte separately */
+
+	BITOFF;
+	return (__force __wsum)sum;
+}
+
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c
new file mode 100644
index 000000000..c7bd6ebdc
--- /dev/null
+++ b/arch/cris/arch-v10/lib/string.c
@@ -0,0 +1,236 @@
+/* A memcpy for CRIS.
+   Copyright (C) 1994-2005 Axis Communications.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   1. Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+   2. Neither the name of Axis Communications nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+   COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+   IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* FIXME: This file should really only be used for reference, as the
+   result is somewhat depending on gcc generating what we expect rather
+   than what we describe.  An assembly file should be used instead.  */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+   modulo 44, so up to the next multiple of 44, we use ordinary code.  */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file.  */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
+{
+  /* Now we want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
+
+  register void *return_dst __asm__ ("r10") = pdst;
+  register unsigned char *dst __asm__ ("r13") = pdst;
+  register unsigned const char *src __asm__ ("r11") = psrc;
+  register int n __asm__ ("r12") = pn;
+
+  /* When src is aligned but not dst, this makes a few extra needless
+     cycles.  I believe it would take as many to check that the
+     re-alignment was unnecessary.  */
+  if (((unsigned long) dst & 3) != 0
+      /* Don't align if we wouldn't copy more than a few bytes; so we
+	 don't have to check further for overflows.  */
+      && n >= 3)
+  {
+    if ((unsigned long) dst & 1)
+      {
+	n--;
+	*dst = *src;
+	src++;
+	dst++;
+      }
+
+    if ((unsigned long) dst & 2)
+      {
+	n -= 2;
+	*(short *) dst = *(short *) src;
+	src += 2;
+	dst += 2;
+      }
+  }
+
+  /* Decide which copying method to use.  */
+  if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+    {
+      /* It is not optimal to tell the compiler about clobbering any
+	 registers; that will move the saving/restoring of those registers
+	 to the function prologue/epilogue, and make non-movem sizes
+	 suboptimal.  */
+      __asm__ volatile
+	("\
+	 ;; GCC does promise correct register allocations, but let's	\n\
+	 ;; make sure it keeps its promises.				\n\
+	 .ifnc %0-%1-%2,$r13-$r11-$r12					\n\
+	 .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\"	\n\
+	 .endif								\n\
+									\n\
+	 ;; Save the registers we'll use in the movem process		\n\
+	 ;; on the stack.						\n\
+	 subq	11*4,sp							\n\
+	 movem	r10,[sp]						\n\
+									\n\
+	 ;; Now we've got this:						\n\
+	 ;; r11 - src							\n\
+	 ;; r13 - dst							\n\
+	 ;; r12 - n							\n\
+									\n\
+	 ;; Update n for the first loop.				\n\
+	 subq	 44,r12							\n\
+0:									\n\
+"
+#ifdef __arch_common_v10_v32
+	 /* Cater to branch offset difference between v32 and v10.  We
+	    assume the branch below has an 8-bit offset.  */
+"	 setf\n"
+#endif
+"	 movem	[r11+],r10						\n\
+	 subq	44,r12							\n\
+	 bge	 0b							\n\
+	 movem	r10,[r13+]						\n\
+									\n\
+	 ;; Compensate for last loop underflowing n.			\n\
+	 addq	44,r12							\n\
+									\n\
+	 ;; Restore registers from stack.				\n\
+	 movem [sp+],r10"
+
+	 /* Outputs.  */
+	 : "=r" (dst), "=r" (src), "=r" (n)
+
+	 /* Inputs.  */
+	 : "0" (dst), "1" (src), "2" (n));
+    }
+
+  while (n >= 16)
+    {
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+
+      n -= 16;
+    }
+
+  switch (n)
+    {
+    case 0:
+      break;
+
+    case 1:
+      *dst = *src;
+      break;
+
+    case 2:
+      *(short *) dst = *(short *) src;
+      break;
+
+    case 3:
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
+      break;
+
+    case 4:
+      *(long *) dst = *(long *) src;
+      break;
+
+    case 5:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
+      break;
+
+    case 6:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
+      break;
+
+    case 7:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
+      break;
+
+    case 8:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
+      break;
+
+    case 9:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
+      break;
+
+    case 10:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
+      break;
+
+    case 11:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
+      break;
+
+    case 12:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
+      break;
+
+    case 13:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
+      break;
+
+    case 14:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
+      break;
+
+    case 15:
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
+      break;
+    }
+
+  return return_dst;
+}
diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c
new file mode 100644
index 000000000..b964c667a
--- /dev/null
+++ b/arch/cris/arch-v10/lib/usercopy.c
@@ -0,0 +1,523 @@
+/*
+ * User address space access functions.
+ * The non-inlined parts of asm-cris/uaccess.h are here.
+ *
+ * Copyright (C) 2000, Axis Communications AB.
+ *
+ * Written by Hans-Peter Nilsson.
+ * Pieces used from memcpy, originally by Kenny Ranerup long time ago.
+ */
+
+#include <asm/uaccess.h>
+
+/* Asm:s have been tweaked (within the domain of correctness) to give
+   satisfactory results for "gcc version 2.96 20000427 (experimental)".
+
+   Check regularly...
+
+   Note that the PC saved at a bus-fault is the address *after* the
+   faulting instruction, which means the branch-target for instructions in
+   delay-slots for taken branches.  Note also that the postincrement in
+   the instruction is performed regardless of bus-fault; the register is
+   seen updated in fault handlers.
+
+   Oh, and on the code formatting issue, to whomever feels like "fixing
+   it" to Conformity: I'm too "lazy", but why don't you go ahead and "fix"
+   string.c too.  I just don't think too many people will hack this file
+   for the code format to be an issue.  */
+
+
+/* Copy to userspace.  This is based on the memcpy used for
+   kernel-to-kernel copying; see "string.c".  */
+
+unsigned long __copy_user(void __user *pdst, const void *psrc, unsigned long pn)
+{
+  /* We want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     FIXME: Comment for old gcc version.  Check.
+     If gcc was alright, it really would need no temporaries, and no
+     stack space to save stuff on. */
+
+  register char *dst __asm__ ("r13") = pdst;
+  register const char *src __asm__ ("r11") = psrc;
+  register int n __asm__ ("r12") = pn;
+  register int retn __asm__ ("r10") = 0;
+
+
+  /* When src is aligned but not dst, this makes a few extra needless
+     cycles.  I believe it would take as many to check that the
+     re-alignment was unnecessary.  */
+  if (((unsigned long) dst & 3) != 0
+      /* Don't align if we wouldn't copy more than a few bytes; so we
+	 don't have to check further for overflows.  */
+      && n >= 3)
+  {
+    if ((unsigned long) dst & 1)
+    {
+      __asm_copy_to_user_1 (dst, src, retn);
+      n--;
+    }
+
+    if ((unsigned long) dst & 2)
+    {
+      __asm_copy_to_user_2 (dst, src, retn);
+      n -= 2;
+    }
+  }
+
+  /* Decide which copying method to use. */
+  if (n >= 44*2)		/* Break even between movem and
+				   move16 is at 38.7*2, but modulo 44. */
+  {
+    /* For large copies we use 'movem'.  */
+
+    /* It is not optimal to tell the compiler about clobbering any
+       registers; that will move the saving/restoring of those registers
+       to the function prologue/epilogue, and make non-movem sizes
+       suboptimal.
+
+       This method is not foolproof; it assumes that the "asm reg"
+       declarations at the beginning of the function really are used
+       here (beware: they may be moved to temporary registers).
+       This way, we do not have to save/move the registers around into
+       temporaries; we can safely use them straight away.
+
+       If you want to check that the allocation was right; then
+       check the equalities in the first comment.  It should say
+       "r13=r13, r11=r11, r12=r12".  */
+    __asm__ volatile ("\
+	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+									\n\
+; Since the noted PC of a faulting instruction in a delay-slot of a taken \n\
+; branch, is that of the branch target, we actually point at the from-movem \n\
+; for this case.  There is no ambiguity here; if there was a fault in that \n\
+; instruction (meaning a kernel oops), the faulted PC would be the address \n\
+; after *that* movem.							\n\
+									\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+1:									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+; To provide a correct count in r10 of bytes that failed to be copied,	\n\
+; we jump back into the loop if the loop-branch was taken.  There is no	\n\
+; performance penalty for sany use; the program will segfault soon enough.\n\
+									\n\
+3:									\n\
+	move.d [$sp],$r10						\n\
+	addq 44,$r10							\n\
+	move.d $r10,[$sp]						\n\
+	jump 0b								\n\
+4:									\n\
+	movem [$sp+],$r10						\n\
+	addq 44,$r10							\n\
+	addq 44,$r12							\n\
+	jump 2b								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.dword 1b,4b							\n\
+	.previous"
+
+     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+     /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+
+  }
+
+  /* Either we directly start copying, using dword copying in a loop, or
+     we copy as much as possible with 'movem' and then the last block (<44
+     bytes) is copied here.  This will work since 'movem' will have
+     updated SRC, DST and N.  */
+
+  while (n >= 16)
+  {
+    __asm_copy_to_user_16 (dst, src, retn);
+    n -= 16;
+  }
+
+  /* Having a separate by-four loops cuts down on cache footprint.
+     FIXME:  Test with and without; increasing switch to be 0..15.  */
+  while (n >= 4)
+  {
+    __asm_copy_to_user_4 (dst, src, retn);
+    n -= 4;
+  }
+
+  switch (n)
+  {
+    case 0:
+      break;
+    case 1:
+      __asm_copy_to_user_1 (dst, src, retn);
+      break;
+    case 2:
+      __asm_copy_to_user_2 (dst, src, retn);
+      break;
+    case 3:
+      __asm_copy_to_user_3 (dst, src, retn);
+      break;
+  }
+
+  return retn;
+}
+EXPORT_SYMBOL(__copy_user);
+
+/* Copy from user to kernel, zeroing the bytes that were inaccessible in
+   userland.  The return-value is the number of bytes that were
+   inaccessible.  */
+
+unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
+				  unsigned long pn)
+{
+  /* We want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     FIXME: Comment for old gcc version.  Check.
+     If gcc was alright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
+
+  register char *dst __asm__ ("r13") = pdst;
+  register const char *src __asm__ ("r11") = psrc;
+  register int n __asm__ ("r12") = pn;
+  register int retn __asm__ ("r10") = 0;
+
+  /* The best reason to align src is that we then know that a read-fault
+     was for aligned bytes; there's no 1..3 remaining good bytes to
+     pickle.  */
+  if (((unsigned long) src & 3) != 0)
+  {
+    if (((unsigned long) src & 1) && n != 0)
+    {
+      __asm_copy_from_user_1 (dst, src, retn);
+      n--;
+    }
+
+    if (((unsigned long) src & 2) && n >= 2)
+    {
+      __asm_copy_from_user_2 (dst, src, retn);
+      n -= 2;
+    }
+
+    /* We only need one check after the unalignment-adjustments, because
+       if both adjustments were done, either both or neither reference
+       had an exception.  */
+    if (retn != 0)
+      goto copy_exception_bytes;
+  }
+
+  /* Decide which copying method to use. */
+  if (n >= 44*2)		/* Break even between movem and
+				   move16 is at 38.7*2, but modulo 44.
+				   FIXME: We use move4 now.  */
+  {
+    /* For large copies we use 'movem' */
+
+    /* It is not optimal to tell the compiler about clobbering any
+       registers; that will move the saving/restoring of those registers
+       to the function prologue/epilogue, and make non-movem sizes
+       suboptimal.
+
+       This method is not foolproof; it assumes that the "asm reg"
+       declarations at the beginning of the function really are used
+       here (beware: they may be moved to temporary registers).
+       This way, we do not have to save/move the registers around into
+       temporaries; we can safely use them straight away.
+
+       If you want to check that the allocation was right; then
+       check the equalities in the first comment.  It should say
+       "r13=r13, r11=r11, r12=r12" */
+    __asm__ volatile ("\n\
+	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+1:									\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+4:									\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+;; Do not jump back into the loop if we fail.  For some uses, we get a	\n\
+;; page fault somewhere on the line.  Without checking for page limits,	\n\
+;; we don't know where, but we need to copy accurately and keep an	\n\
+;; accurate count; not just clear the whole line.  To do that, we fall	\n\
+;; down in the code below, proceeding with smaller amounts.  It should	\n\
+;; be kept in mind that we have to cater to code like what at one time	\n\
+;; was in fs/super.c:							\n\
+;;  i = size - copy_from_user((void *)page, data, size);		\n\
+;; which would cause repeated faults while clearing the remainder of	\n\
+;; the SIZE bytes at PAGE after the first fault.			\n\
+;; A caveat here is that we must not fall through from a failing page	\n\
+;; to a valid page.							\n\
+									\n\
+3:									\n\
+	movem  [$sp+],$r10						\n\
+	addq	44,$r12 ;; Get back count before faulting point.	\n\
+	subq	44,$r11 ;; Get back pointer to faulting movem-line.	\n\
+	jump	4b	;; Fall through, pretending the fault didn't happen.\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 1b,3b							\n\
+	.previous"
+
+     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+     /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+
+  }
+
+  /* Either we directly start copying here, using dword copying in a loop,
+     or we copy as much as possible with 'movem' and then the last block
+     (<44 bytes) is copied here.  This will work since 'movem' will have
+     updated src, dst and n.  (Except with failing src.)
+
+     Since we want to keep src accurate, we can't use
+     __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and
+     retn, but not src (by design; it's value is ignored elsewhere).  */
+
+  while (n >= 4)
+  {
+    __asm_copy_from_user_4 (dst, src, retn);
+    n -= 4;
+
+    if (retn)
+      goto copy_exception_bytes;
+  }
+
+  /* If we get here, there were no memory read faults.  */
+  switch (n)
+  {
+    /* These copies are at least "naturally aligned" (so we don't have
+       to check each byte), due to the src alignment code before the
+       movem loop.  The *_3 case *will* get the correct count for retn.  */
+    case 0:
+      /* This case deliberately left in (if you have doubts check the
+	 generated assembly code).  */
+      break;
+    case 1:
+      __asm_copy_from_user_1 (dst, src, retn);
+      break;
+    case 2:
+      __asm_copy_from_user_2 (dst, src, retn);
+      break;
+    case 3:
+      __asm_copy_from_user_3 (dst, src, retn);
+      break;
+  }
+
+  /* If we get here, retn correctly reflects the number of failing
+     bytes.  */
+  return retn;
+
+copy_exception_bytes:
+  /* We already have "retn" bytes cleared, and need to clear the
+     remaining "n" bytes.  A non-optimized simple byte-for-byte in-line
+     memset is preferred here, since this isn't speed-critical code and
+     we'd rather have this a leaf-function than calling memset.  */
+  {
+    char *endp;
+    for (endp = dst + n; dst < endp; dst++)
+      *dst = 0;
+  }
+
+  return retn + n;
+}
+EXPORT_SYMBOL(__copy_user_zeroing);
+
+/* Zero userspace.  */
+unsigned long __do_clear_user(void __user *pto, unsigned long pn)
+{
+  /* We want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     FIXME: Comment for old gcc version.  Check.
+     If gcc was alright, it really would need no temporaries, and no
+     stack space to save stuff on. */
+
+  register char *dst __asm__ ("r13") = pto;
+  register int n __asm__ ("r12") = pn;
+  register int retn __asm__ ("r10") = 0;
+
+
+  if (((unsigned long) dst & 3) != 0
+     /* Don't align if we wouldn't copy more than a few bytes.  */
+      && n >= 3)
+  {
+    if ((unsigned long) dst & 1)
+    {
+      __asm_clear_1 (dst, retn);
+      n--;
+    }
+
+    if ((unsigned long) dst & 2)
+    {
+      __asm_clear_2 (dst, retn);
+      n -= 2;
+    }
+  }
+
+  /* Decide which copying method to use.
+     FIXME: This number is from the "ordinary" kernel memset.  */
+  if (n >= (1*48))
+  {
+    /* For large clears we use 'movem' */
+
+    /* It is not optimal to tell the compiler about clobbering any
+       call-saved registers; that will move the saving/restoring of
+       those registers to the function prologue/epilogue, and make
+       non-movem sizes suboptimal.
+
+       This method is not foolproof; it assumes that the "asm reg"
+       declarations at the beginning of the function really are used
+       here (beware: they may be moved to temporary registers).
+       This way, we do not have to save/move the registers around into
+       temporaries; we can safely use them straight away.
+
+      If you want to check that the allocation was right; then
+      check the equalities in the first comment.  It should say
+      something like "r13=r13, r11=r11, r12=r12". */
+    __asm__ volatile ("\n\
+	.ifnc %0%1%2,$r13$r12$r10					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	clear.d $r0							\n\
+	clear.d $r1							\n\
+	clear.d $r2							\n\
+	clear.d $r3							\n\
+	clear.d $r4							\n\
+	clear.d $r5							\n\
+	clear.d $r6							\n\
+	clear.d $r7							\n\
+	clear.d $r8							\n\
+	clear.d $r9							\n\
+	clear.d $r10							\n\
+	clear.d $r11							\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	12*4,$r12						\n\
+0:									\n\
+	subq   12*4,$r12						\n\
+	bge	0b							\n\
+	movem	$r11,[$r13+]						\n\
+1:									\n\
+	addq   12*4,$r12        ;; compensate for last loop underflowing n\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+3:									\n\
+	move.d [$sp],$r10						\n\
+	addq 12*4,$r10							\n\
+	move.d $r10,[$sp]						\n\
+	clear.d $r10							\n\
+	jump 0b								\n\
+									\n\
+4:									\n\
+	movem [$sp+],$r10						\n\
+	addq 12*4,$r10							\n\
+	addq 12*4,$r12							\n\
+	jump 2b								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.dword 1b,4b							\n\
+	.previous"
+
+     /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)
+     /* Inputs */ : "0" (dst), "1" (n), "2" (retn)
+     /* Clobber */ : "r11");
+  }
+
+  while (n >= 16)
+  {
+    __asm_clear_16 (dst, retn);
+    n -= 16;
+  }
+
+  /* Having a separate by-four loops cuts down on cache footprint.
+     FIXME:  Test with and without; increasing switch to be 0..15.  */
+  while (n >= 4)
+  {
+    __asm_clear_4 (dst, retn);
+    n -= 4;
+  }
+
+  switch (n)
+  {
+    case 0:
+      break;
+    case 1:
+      __asm_clear_1 (dst, retn);
+      break;
+    case 2:
+      __asm_clear_2 (dst, retn);
+      break;
+    case 3:
+      __asm_clear_3 (dst, retn);
+      break;
+  }
+
+  return retn;
+}
+EXPORT_SYMBOL(__do_clear_user);
diff --git a/arch/cris/arch-v10/mm/Makefile b/arch/cris/arch-v10/mm/Makefile
new file mode 100644
index 000000000..588b4baee
--- /dev/null
+++ b/arch/cris/arch-v10/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux cris-specific parts of the memory manager.
+#
+
+obj-y	 := fault.o init.o tlb.o
+
diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c
new file mode 100644
index 000000000..ed60588f8
--- /dev/null
+++ b/arch/cris/arch-v10/mm/fault.c
@@ -0,0 +1,95 @@
+/*
+ *  linux/arch/cris/mm/fault.c
+ *
+ *  Low level bus fault handler
+ *
+ *
+ *  Copyright (C) 2000-2007  Axis Communications AB
+ *
+ *  Authors:  Bjorn Wesen
+ *
+ */
+
+#include <linux/mm.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <arch/svinto.h>
+#include <asm/mmu_context.h>
+
+/* debug of low-level TLB reload */
+#undef DEBUG
+
+#ifdef DEBUG
+#define D(x) x
+#else
+#define D(x)
+#endif
+
+extern const struct exception_table_entry
+	*search_exception_tables(unsigned long addr);
+
+asmlinkage void do_page_fault(unsigned long address, struct pt_regs *regs,
+                              int protection, int writeaccess);
+
+/* fast TLB-fill fault handler
+ * this is called from entry.S with interrupts disabled
+ */
+
+void
+handle_mmu_bus_fault(struct pt_regs *regs)
+{
+	int cause;
+	int select;
+#ifdef DEBUG
+	int index;
+	int page_id;
+	int acc, inv;
+#endif
+	pgd_t* pgd = (pgd_t*)per_cpu(current_pgd, smp_processor_id());
+	pmd_t *pmd;
+	pte_t pte;
+	int miss, we, writeac;
+	unsigned long address;
+	unsigned long flags;
+
+	cause = *R_MMU_CAUSE;
+
+	address = cause & PAGE_MASK; /* get faulting address */
+	select = *R_TLB_SELECT;
+
+#ifdef DEBUG
+	page_id = IO_EXTRACT(R_MMU_CAUSE,  page_id,   cause);
+	acc     = IO_EXTRACT(R_MMU_CAUSE,  acc_excp,  cause);
+	inv     = IO_EXTRACT(R_MMU_CAUSE,  inv_excp,  cause);
+	index   = IO_EXTRACT(R_TLB_SELECT, index,     select);
+#endif
+	miss    = IO_EXTRACT(R_MMU_CAUSE,  miss_excp, cause);
+	we      = IO_EXTRACT(R_MMU_CAUSE,  we_excp,   cause);
+	writeac = IO_EXTRACT(R_MMU_CAUSE,  wr_rd,     cause);
+
+	D(printk("bus_fault from IRP 0x%lx: addr 0x%lx, miss %d, inv %d, we %d, acc %d, dx %d pid %d\n",
+		 regs->irp, address, miss, inv, we, acc, index, page_id));
+
+	/* leave it to the MM system fault handler */
+	if (miss)
+		do_page_fault(address, regs, 0, writeac);
+        else
+		do_page_fault(address, regs, 1, we);
+
+        /* Reload TLB with new entry to avoid an extra miss exception.
+	 * do_page_fault may have flushed the TLB so we have to restore
+	 * the MMU registers.
+	 */
+	local_irq_save(flags);
+	pmd = (pmd_t *)(pgd + pgd_index(address));
+	if (pmd_none(*pmd))
+		goto exit;
+	pte = *pte_offset_kernel(pmd, address);
+	if (!pte_present(pte))
+		goto exit;
+	*R_TLB_SELECT = select;
+	*R_TLB_HI = cause;
+	*R_TLB_LO = pte_val(pte);
+exit:
+	local_irq_restore(flags);
+}
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
new file mode 100644
index 000000000..e7f806610
--- /dev/null
+++ b/arch/cris/arch-v10/mm/init.c
@@ -0,0 +1,263 @@
+/*
+ *  linux/arch/cris/arch-v10/mm/init.c
+ *
+ */
+#include <linux/mmzone.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <arch/svinto.h>
+
+extern void tlb_init(void);
+
+/*
+ * The kernel is already mapped with a kernel segment at kseg_c so 
+ * we don't need to map it with a page table. However head.S also
+ * temporarily mapped it at kseg_4 so we should set up the ksegs again,
+ * clear the TLB and do some other paging setup stuff.
+ */
+
+void __init 
+paging_init(void)
+{
+	int i;
+	unsigned long zones_size[MAX_NR_ZONES];
+
+	printk("Setting up paging and the MMU.\n");
+	
+	/* clear out the init_mm.pgd that will contain the kernel's mappings */
+
+	for(i = 0; i < PTRS_PER_PGD; i++)
+		swapper_pg_dir[i] = __pgd(0);
+	
+	/* make sure the current pgd table points to something sane
+	 * (even if it is most probably not used until the next 
+	 *  switch_mm)
+	 */
+
+	per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd;
+
+	/* initialise the TLB (tlb.c) */
+
+	tlb_init();
+
+	/* see README.mm for details on the KSEG setup */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+	/* Etrax-100 LX version 1 has a bug so that we cannot map anything
+	 * across the 0x80000000 boundary, so we need to shrink the user-virtual
+	 * area to 0x50000000 instead of 0xb0000000 and map things slightly
+	 * different. The unused areas are marked as paged so that we can catch
+	 * freak kernel accesses there.
+	 *
+	 * The ARTPEC chip is mapped at 0xa so we pass that segment straight
+	 * through. We cannot vremap it because the vmalloc area is below 0x8
+	 * and Juliette needs an uncached area above 0x8.
+	 *
+	 * Same thing with 0xc and 0x9, which is memory-mapped I/O on some boards.
+	 * We map them straight over in LOW_MAP, but use vremap in LX version 2.
+	 */
+
+#define CACHED_BOOTROM (KSEG_F | 0x08000000UL)
+
+	*R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg  ) |  /* bootrom */
+			IO_STATE(R_MMU_KSEG, seg_e, page ) |
+			IO_STATE(R_MMU_KSEG, seg_d, page ) | 
+			IO_STATE(R_MMU_KSEG, seg_c, page ) |   
+			IO_STATE(R_MMU_KSEG, seg_b, seg  ) |  /* kernel reg area */
+#ifdef CONFIG_JULIETTE
+			IO_STATE(R_MMU_KSEG, seg_a, seg  ) |  /* ARTPEC etc. */
+#else
+			IO_STATE(R_MMU_KSEG, seg_a, page ) |
+#endif
+			IO_STATE(R_MMU_KSEG, seg_9, seg  ) |  /* LED's on some boards */
+			IO_STATE(R_MMU_KSEG, seg_8, seg  ) |  /* CSE0/1, flash and I/O */
+			IO_STATE(R_MMU_KSEG, seg_7, page ) |  /* kernel vmalloc area */
+			IO_STATE(R_MMU_KSEG, seg_6, seg  ) |  /* kernel DRAM area */
+			IO_STATE(R_MMU_KSEG, seg_5, seg  ) |  /* cached flash */
+			IO_STATE(R_MMU_KSEG, seg_4, page ) |  /* user area */
+			IO_STATE(R_MMU_KSEG, seg_3, page ) |  /* user area */
+			IO_STATE(R_MMU_KSEG, seg_2, page ) |  /* user area */
+			IO_STATE(R_MMU_KSEG, seg_1, page ) |  /* user area */
+			IO_STATE(R_MMU_KSEG, seg_0, page ) ); /* user area */
+
+	*R_MMU_KBASE_HI = ( IO_FIELD(R_MMU_KBASE_HI, base_f, 0x3 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_e, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
+#ifdef CONFIG_JULIETTE
+			    IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) |
+#else
+			    IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) |
+#endif
+			    IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) );
+	
+	*R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_4, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_3, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_2, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_1, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_0, 0x0 ) );
+#else
+	/* This code is for the corrected Etrax-100 LX version 2... */
+
+#define CACHED_BOOTROM (KSEG_A | 0x08000000UL)
+
+	*R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg  ) | /* cached flash */
+			IO_STATE(R_MMU_KSEG, seg_e, seg  ) | /* uncached flash */
+			IO_STATE(R_MMU_KSEG, seg_d, page ) | /* vmalloc area */
+			IO_STATE(R_MMU_KSEG, seg_c, seg  ) | /* kernel area */
+			IO_STATE(R_MMU_KSEG, seg_b, seg  ) | /* kernel reg area */
+			IO_STATE(R_MMU_KSEG, seg_a, seg  ) | /* bootrom */
+			IO_STATE(R_MMU_KSEG, seg_9, page ) | /* user area */
+			IO_STATE(R_MMU_KSEG, seg_8, page ) |
+			IO_STATE(R_MMU_KSEG, seg_7, page ) |
+			IO_STATE(R_MMU_KSEG, seg_6, page ) |
+			IO_STATE(R_MMU_KSEG, seg_5, page ) |
+			IO_STATE(R_MMU_KSEG, seg_4, page ) |
+			IO_STATE(R_MMU_KSEG, seg_3, page ) |
+			IO_STATE(R_MMU_KSEG, seg_2, page ) |
+			IO_STATE(R_MMU_KSEG, seg_1, page ) |
+			IO_STATE(R_MMU_KSEG, seg_0, page ) );
+
+	*R_MMU_KBASE_HI = ( IO_FIELD(R_MMU_KBASE_HI, base_f, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_e, 0x8 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_c, 0x4 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_a, 0x3 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_9, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_HI, base_8, 0x0 ) );
+	
+	*R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_6, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_4, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_3, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_2, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_1, 0x0 ) |
+			    IO_FIELD(R_MMU_KBASE_LO, base_0, 0x0 ) );
+#endif
+
+	*R_MMU_CONTEXT = ( IO_FIELD(R_MMU_CONTEXT, page_id, 0 ) );
+	
+	/* The MMU has been enabled ever since head.S but just to make
+	 * it totally obvious we do it here as well.
+	 */
+
+	*R_MMU_CTRL = ( IO_STATE(R_MMU_CTRL, inv_excp, enable ) |
+			IO_STATE(R_MMU_CTRL, acc_excp, enable ) |
+			IO_STATE(R_MMU_CTRL, we_excp,  enable ) );
+	
+	*R_MMU_ENABLE = IO_STATE(R_MMU_ENABLE, mmu_enable, enable);
+
+	/*
+	 * initialize the bad page table and bad page to point
+	 * to a couple of allocated pages
+	 */
+
+	empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+	memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+	/* All pages are DMA'able in Etrax, so put all in the DMA'able zone */
+
+	zones_size[0] = ((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+
+	for (i = 1; i < MAX_NR_ZONES; i++)
+		zones_size[i] = 0;
+
+	/* Use free_area_init_node instead of free_area_init, because the former
+	 * is designed for systems where the DRAM starts at an address substantially
+	 * higher than 0, like us (we start at PAGE_OFFSET). This saves space in the
+	 * mem_map page array.
+	 */
+
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+}
+
+/* Initialize remaps of some I/O-ports. It is important that this
+ * is called before any driver is initialized.
+ */
+
+static int
+__init init_ioremap(void)
+{
+  
+	/* Give the external I/O-port addresses their values */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+	/* Simply a linear map (see the KSEG map above in paging_init) */
+	port_cse1_addr = (volatile unsigned long *)(MEM_CSE1_START | 
+	                                            MEM_NON_CACHEABLE);
+	port_csp0_addr = (volatile unsigned long *)(MEM_CSP0_START |
+	                                            MEM_NON_CACHEABLE);
+	port_csp4_addr = (volatile unsigned long *)(MEM_CSP4_START |
+	                                            MEM_NON_CACHEABLE);
+#else
+	/* Note that nothing blows up just because we do this remapping 
+	 * it's ok even if the ports are not used or connected 
+	 * to anything (or connected to a non-I/O thing) */        
+	port_cse1_addr = (volatile unsigned long *)
+	  ioremap((unsigned long)(MEM_CSE1_START | MEM_NON_CACHEABLE), 16);
+	port_csp0_addr = (volatile unsigned long *)
+	  ioremap((unsigned long)(MEM_CSP0_START | MEM_NON_CACHEABLE), 16);
+	port_csp4_addr = (volatile unsigned long *)
+	  ioremap((unsigned long)(MEM_CSP4_START | MEM_NON_CACHEABLE), 16);
+#endif	
+	return 0;
+}
+
+__initcall(init_ioremap);
+
+/* Helper function for the two below */
+
+static inline void
+flush_etrax_cacherange(void *startadr, int length)
+{
+	/* CACHED_BOOTROM is mapped to the boot-rom area (cached) which
+	 * we can use to get fast dummy-reads of cachelines
+	 */
+
+	volatile short *flushadr = (volatile short *)(((unsigned long)startadr & ~PAGE_MASK) |
+						      CACHED_BOOTROM);
+
+	length = length > 8192 ? 8192 : length;  /* No need to flush more than cache size */
+
+	while(length > 0) {
+		*flushadr; /* dummy read to flush */
+		flushadr += (32/sizeof(short));  /* a cacheline is 32 bytes */
+		length -= 32;
+	}
+}
+
+/* Due to a bug in Etrax100(LX) all versions, receiving DMA buffers
+ * will occasionally corrupt certain CPU writes if the DMA buffers
+ * happen to be hot in the cache.
+ * 
+ * As a workaround, we have to flush the relevant parts of the cache
+ * before (re) inserting any receiving descriptor into the DMA HW.
+ */
+
+void
+prepare_rx_descriptor(struct etrax_dma_descr *desc)
+{
+	flush_etrax_cacherange((void *)desc->buf, desc->sw_len ? desc->sw_len : 65536);
+}
+
+/* Do the same thing but flush the entire cache */
+
+void
+flush_etrax_cache(void)
+{
+	flush_etrax_cacherange(0, 8192);
+}
diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c
new file mode 100644
index 000000000..21d78c599
--- /dev/null
+++ b/arch/cris/arch-v10/mm/tlb.c
@@ -0,0 +1,176 @@
+/*
+ *  linux/arch/cris/arch-v10/mm/tlb.c
+ *
+ *  Low level TLB handling
+ *
+ *
+ *  Copyright (C) 2000-2007  Axis Communications AB
+ *
+ *  Authors:   Bjorn Wesen (bjornw@axis.com)
+ *
+ */
+
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <arch/svinto.h>
+
+#define D(x)
+
+/* The TLB can host up to 64 different mm contexts at the same time.
+ * The running context is R_MMU_CONTEXT, and each TLB entry contains a
+ * page_id that has to match to give a hit. In page_id_map, we keep track
+ * of which mm's we have assigned which page_id's, so that we know when
+ * to invalidate TLB entries.
+ *
+ * The last page_id is never running - it is used as an invalid page_id
+ * so we can make TLB entries that will never match.
+ *
+ * Notice that we need to make the flushes atomic, otherwise an interrupt
+ * handler that uses vmalloced memory might cause a TLB load in the middle
+ * of a flush causing.
+ */
+
+/* invalidate all TLB entries */
+
+void
+flush_tlb_all(void)
+{
+	int i;
+	unsigned long flags;
+
+	/* the vpn of i & 0xf is so we dont write similar TLB entries
+	 * in the same 4-way entry group. details...
+	 */
+
+	local_irq_save(flags);
+	for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+		*R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
+		*R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+			      IO_FIELD(R_TLB_HI, vpn,     i & 0xf ) );
+
+		*R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no       ) |
+			      IO_STATE(R_TLB_LO, valid, no       ) |
+			      IO_STATE(R_TLB_LO, kernel,no	 ) |
+			      IO_STATE(R_TLB_LO, we,    no       ) |
+			      IO_FIELD(R_TLB_LO, pfn,   0        ) );
+	}
+	local_irq_restore(flags);
+	D(printk("tlb: flushed all\n"));
+}
+
+/* invalidate the selected mm context only */
+
+void
+flush_tlb_mm(struct mm_struct *mm)
+{
+	int i;
+	int page_id = mm->context.page_id;
+	unsigned long flags;
+
+	D(printk("tlb: flush mm context %d (%p)\n", page_id, mm));
+
+	if(page_id == NO_CONTEXT)
+		return;
+
+	/* mark the TLB entries that match the page_id as invalid.
+	 * here we could also check the _PAGE_GLOBAL bit and NOT flush
+	 * global pages. is it worth the extra I/O ?
+	 */
+
+	local_irq_save(flags);
+	for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+		*R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i);
+		if (IO_EXTRACT(R_TLB_HI, page_id, *R_TLB_HI) == page_id) {
+			*R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+				      IO_FIELD(R_TLB_HI, vpn,     i & 0xf ) );
+
+			*R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no  ) |
+				      IO_STATE(R_TLB_LO, valid, no  ) |
+				      IO_STATE(R_TLB_LO, kernel,no  ) |
+				      IO_STATE(R_TLB_LO, we,    no  ) |
+				      IO_FIELD(R_TLB_LO, pfn,   0   ) );
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/* invalidate a single page */
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	int page_id = mm->context.page_id;
+	int i;
+	unsigned long flags;
+
+	D(printk("tlb: flush page %p in context %d (%p)\n", addr, page_id, mm));
+
+	if(page_id == NO_CONTEXT)
+		return;
+
+	addr &= PAGE_MASK; /* perhaps not necessary */
+
+	/* invalidate those TLB entries that match both the mm context
+	 * and the virtual address requested
+	 */
+
+	local_irq_save(flags);
+	for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+		unsigned long tlb_hi;
+		*R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i);
+		tlb_hi = *R_TLB_HI;
+		if (IO_EXTRACT(R_TLB_HI, page_id, tlb_hi) == page_id &&
+		    (tlb_hi & PAGE_MASK) == addr) {
+			*R_TLB_HI = IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+				addr; /* same addr as before works. */
+
+			*R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no  ) |
+				      IO_STATE(R_TLB_LO, valid, no  ) |
+				      IO_STATE(R_TLB_LO, kernel,no  ) |
+				      IO_STATE(R_TLB_LO, we,    no  ) |
+				      IO_FIELD(R_TLB_LO, pfn,   0   ) );
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context.page_id = NO_CONTEXT;
+	return 0;
+}
+
+/* called in schedule() just before actually doing the switch_to */
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	struct task_struct *tsk)
+{
+	if (prev != next) {
+		/* make sure we have a context */
+		get_mmu_context(next);
+
+		/* remember the pgd for the fault handlers
+		 * this is similar to the pgd register in some other CPU's.
+		 * we need our own copy of it because current and active_mm
+		 * might be invalid at points where we still need to derefer
+		 * the pgd.
+		 */
+
+		per_cpu(current_pgd, smp_processor_id()) = next->pgd;
+
+		/* switch context in the MMU */
+
+		D(printk(KERN_DEBUG "switching mmu_context to %d (%p)\n",
+			next->context, next));
+
+		*R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT,
+					  page_id, next->context.page_id);
+	}
+}
+
diff --git a/arch/cris/arch-v10/output_arch.ld b/arch/cris/arch-v10/output_arch.ld
new file mode 100644
index 000000000..2f3288006
--- /dev/null
+++ b/arch/cris/arch-v10/output_arch.ld
@@ -0,0 +1,2 @@
+/* At the time of this writing, there's no equivalent ld option. */
+OUTPUT_ARCH (cris)