summaryrefslogtreecommitdiff
path: root/arch/x86/entry/entry_64.S
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
commitd635711daa98be86d4c7fd01499c34f566b54ccb (patch)
treeaa5cc3760a27c3d57146498cb82fa549547de06c /arch/x86/entry/entry_64.S
parentc91265cd0efb83778f015b4d4b1129bd2cfd075e (diff)
Linux-libre 4.6.2-gnu
Diffstat (limited to 'arch/x86/entry/entry_64.S')
-rw-r--r--arch/x86/entry/entry_64.S286
1 files changed, 110 insertions, 176 deletions
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 9d34d3cfc..858b555e2 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -103,6 +103,16 @@ ENDPROC(native_usergs_sysret64)
/*
* 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
*
+ * This is the only entry point used for 64-bit system calls. The
+ * hardware interface is reasonably well designed and the register to
+ * argument mapping Linux uses fits well with the registers that are
+ * available when SYSCALL is used.
+ *
+ * SYSCALL instructions can be found inlined in libc implementations as
+ * well as some other programs and libraries. There are also a handful
+ * of SYSCALL instructions in the vDSO used, for example, as a
+ * clock_gettimeofday fallback.
+ *
* 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
* then loads new ss, cs, and rip from previously programmed MSRs.
* rflags gets masked by a value from another MSR (so CLD and CLAC
@@ -145,17 +155,11 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
movq %rsp, PER_CPU_VAR(rsp_scratch)
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+ TRACE_IRQS_OFF
+
/* Construct struct pt_regs on stack */
pushq $__USER_DS /* pt_regs->ss */
pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */
- /*
- * Re-enable interrupts.
- * We use 'rsp_scratch' as a scratch space, hence irq-off block above
- * must execute atomically in the face of possible interrupt-driven
- * task preemption. We must enable interrupts only after we're done
- * with using rsp_scratch:
- */
- ENABLE_INTERRUPTS(CLBR_NONE)
pushq %r11 /* pt_regs->flags */
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
@@ -171,9 +175,21 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
pushq %r11 /* pt_regs->r11 */
sub $(6*8), %rsp /* pt_regs->bp, bx, r12-15 not saved */
- testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz tracesys
+ /*
+ * If we need to do entry work or if we guess we'll need to do
+ * exit work, go straight to the slow path.
+ */
+ testl $_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+ jnz entry_SYSCALL64_slow_path
+
entry_SYSCALL_64_fastpath:
+ /*
+ * Easy case: enable interrupts and issue the syscall. If the syscall
+ * needs pt_regs, we'll call a stub that disables interrupts again
+ * and jumps to the slow path.
+ */
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
#if __SYSCALL_MASK == ~0
cmpq $__NR_syscall_max, %rax
#else
@@ -182,103 +198,56 @@ entry_SYSCALL_64_fastpath:
#endif
ja 1f /* return -ENOSYS (already in pt_regs->ax) */
movq %r10, %rcx
+
+ /*
+ * This call instruction is handled specially in stub_ptregs_64.
+ * It might end up jumping to the slow path. If it jumps, RAX
+ * and all argument registers are clobbered.
+ */
call *sys_call_table(, %rax, 8)
+.Lentry_SYSCALL_64_after_fastpath_call:
+
movq %rax, RAX(%rsp)
1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
- LOCKDEP_SYS_EXIT
- /*
- * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
- * it is too small to ever cause noticeable irq latency.
- */
- DISABLE_INTERRUPTS(CLBR_NONE)
/*
- * We must check ti flags with interrupts (or at least preemption)
- * off because we must *never* return to userspace without
- * processing exit work that is enqueued if we're preempted here.
- * In particular, returning to userspace with any of the one-shot
- * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
- * very bad.
+ * If we get here, then we know that pt_regs is clean for SYSRET64.
+ * If we see that no exit work is required (which we are required
+ * to check with IRQs off), then we can go straight to SYSRET64.
*/
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
- jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */
+ jnz 1f
- RESTORE_C_REGS_EXCEPT_RCX_R11
+ LOCKDEP_SYS_EXIT
+ TRACE_IRQS_ON /* user mode is traced as IRQs on */
movq RIP(%rsp), %rcx
movq EFLAGS(%rsp), %r11
+ RESTORE_C_REGS_EXCEPT_RCX_R11
movq RSP(%rsp), %rsp
- /*
- * 64-bit SYSRET restores rip from rcx,
- * rflags from r11 (but RF and VM bits are forced to 0),
- * cs and ss are loaded from MSRs.
- * Restoration of rflags re-enables interrupts.
- *
- * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
- * descriptor is not reinitialized. This means that we should
- * avoid SYSRET with SS == NULL, which could happen if we schedule,
- * exit the kernel, and re-enter using an interrupt vector. (All
- * interrupt entries on x86_64 set SS to NULL.) We prevent that
- * from happening by reloading SS in __switch_to. (Actually
- * detecting the failure in 64-bit userspace is tricky but can be
- * done.)
- */
USERGS_SYSRET64
-GLOBAL(int_ret_from_sys_call_irqs_off)
+1:
+ /*
+ * The fast path looked good when we started, but something changed
+ * along the way and we need to switch to the slow path. Calling
+ * raise(3) will trigger this, for example. IRQs are off.
+ */
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
- jmp int_ret_from_sys_call
-
- /* Do syscall entry tracing */
-tracesys:
- movq %rsp, %rdi
- movl $AUDIT_ARCH_X86_64, %esi
- call syscall_trace_enter_phase1
- test %rax, %rax
- jnz tracesys_phase2 /* if needed, run the slow path */
- RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */
- movq ORIG_RAX(%rsp), %rax
- jmp entry_SYSCALL_64_fastpath /* and return to the fast path */
-
-tracesys_phase2:
SAVE_EXTRA_REGS
movq %rsp, %rdi
- movl $AUDIT_ARCH_X86_64, %esi
- movq %rax, %rdx
- call syscall_trace_enter_phase2
-
- /*
- * Reload registers from stack in case ptrace changed them.
- * We don't reload %rax because syscall_trace_entry_phase2() returned
- * the value it wants us to use in the table lookup.
- */
- RESTORE_C_REGS_EXCEPT_RAX
- RESTORE_EXTRA_REGS
-#if __SYSCALL_MASK == ~0
- cmpq $__NR_syscall_max, %rax
-#else
- andl $__SYSCALL_MASK, %eax
- cmpl $__NR_syscall_max, %eax
-#endif
- ja 1f /* return -ENOSYS (already in pt_regs->ax) */
- movq %r10, %rcx /* fixup for C */
- call *sys_call_table(, %rax, 8)
- movq %rax, RAX(%rsp)
-1:
- /* Use IRET because user could have changed pt_regs->foo */
+ call syscall_return_slowpath /* returns with IRQs disabled */
+ jmp return_from_SYSCALL_64
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
+entry_SYSCALL64_slow_path:
+ /* IRQs are off. */
SAVE_EXTRA_REGS
movq %rsp, %rdi
- call syscall_return_slowpath /* returns with IRQs disabled */
+ call do_syscall_64 /* returns with IRQs disabled */
+
+return_from_SYSCALL_64:
RESTORE_EXTRA_REGS
TRACE_IRQS_IRETQ /* we're about to change IF */
@@ -355,83 +324,45 @@ opportunistic_sysret_failed:
jmp restore_c_regs_and_iret
END(entry_SYSCALL_64)
+ENTRY(stub_ptregs_64)
+ /*
+ * Syscalls marked as needing ptregs land here.
+ * If we are on the fast path, we need to save the extra regs,
+ * which we achieve by trying again on the slow path. If we are on
+ * the slow path, the extra regs are already saved.
+ *
+ * RAX stores a pointer to the C function implementing the syscall.
+ * IRQs are on.
+ */
+ cmpq $.Lentry_SYSCALL_64_after_fastpath_call, (%rsp)
+ jne 1f
- .macro FORK_LIKE func
-ENTRY(stub_\func)
- SAVE_EXTRA_REGS 8
- jmp sys_\func
-END(stub_\func)
- .endm
-
- FORK_LIKE clone
- FORK_LIKE fork
- FORK_LIKE vfork
-
-ENTRY(stub_execve)
- call sys_execve
-return_from_execve:
- testl %eax, %eax
- jz 1f
- /* exec failed, can use fast SYSRET code path in this case */
- ret
-1:
- /* must use IRET code path (pt_regs->cs may have changed) */
- addq $8, %rsp
- ZERO_EXTRA_REGS
- movq %rax, RAX(%rsp)
- jmp int_ret_from_sys_call
-END(stub_execve)
-/*
- * Remaining execve stubs are only 7 bytes long.
- * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
- */
- .align 8
-GLOBAL(stub_execveat)
- call sys_execveat
- jmp return_from_execve
-END(stub_execveat)
-
-#if defined(CONFIG_X86_X32_ABI)
- .align 8
-GLOBAL(stub_x32_execve)
- call compat_sys_execve
- jmp return_from_execve
-END(stub_x32_execve)
- .align 8
-GLOBAL(stub_x32_execveat)
- call compat_sys_execveat
- jmp return_from_execve
-END(stub_x32_execveat)
-#endif
-
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */
-ENTRY(stub_rt_sigreturn)
/*
- * SAVE_EXTRA_REGS result is not normally needed:
- * sigreturn overwrites all pt_regs->GPREGS.
- * But sigreturn can fail (!), and there is no easy way to detect that.
- * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
- * we SAVE_EXTRA_REGS here.
+ * Called from fast path -- disable IRQs again, pop return address
+ * and jump to slow path
*/
- SAVE_EXTRA_REGS 8
- call sys_rt_sigreturn
-return_from_stub:
- addq $8, %rsp
- RESTORE_EXTRA_REGS
- movq %rax, RAX(%rsp)
- jmp int_ret_from_sys_call
-END(stub_rt_sigreturn)
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ popq %rax
+ jmp entry_SYSCALL64_slow_path
-#ifdef CONFIG_X86_X32_ABI
-ENTRY(stub_x32_rt_sigreturn)
- SAVE_EXTRA_REGS 8
- call sys32_x32_rt_sigreturn
- jmp return_from_stub
-END(stub_x32_rt_sigreturn)
-#endif
+1:
+ /* Called from C */
+ jmp *%rax /* called from C */
+END(stub_ptregs_64)
+
+.macro ptregs_stub func
+ENTRY(ptregs_\func)
+ leaq \func(%rip), %rax
+ jmp stub_ptregs_64
+END(ptregs_\func)
+.endm
+
+/* Instantiate ptregs_stub for each ptregs-using syscall */
+#define __SYSCALL_64_QUAL_(sym)
+#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_stub sym
+#define __SYSCALL_64(nr, sym, qual) __SYSCALL_64_QUAL_##qual(sym)
+#include <asm/syscalls_64.h>
/*
* A newly forked process directly context switches into this address.
@@ -439,7 +370,6 @@ END(stub_x32_rt_sigreturn)
* rdi: prev task we switched from
*/
ENTRY(ret_from_fork)
-
LOCK ; btr $TIF_FORK, TI_flags(%r8)
pushq $0x0002
@@ -447,28 +377,32 @@ ENTRY(ret_from_fork)
call schedule_tail /* rdi: 'prev' task parameter */
- RESTORE_EXTRA_REGS
-
testb $3, CS(%rsp) /* from kernel_thread? */
+ jnz 1f
/*
- * By the time we get here, we have no idea whether our pt_regs,
- * ti flags, and ti status came from the 64-bit SYSCALL fast path,
- * the slow path, or one of the 32-bit compat paths.
- * Use IRET code path to return, since it can safely handle
- * all of the above.
+ * We came from kernel_thread. This code path is quite twisted, and
+ * someone should clean it up.
+ *
+ * copy_thread_tls stashes the function pointer in RBX and the
+ * parameter to be passed in RBP. The called function is permitted
+ * to call do_execve and thereby jump to user mode.
*/
- jnz int_ret_from_sys_call
+ movq RBP(%rsp), %rdi
+ call *RBX(%rsp)
+ movl $0, RAX(%rsp)
/*
- * We came from kernel_thread
- * nb: we depend on RESTORE_EXTRA_REGS above
+ * Fall through as though we're exiting a syscall. This makes a
+ * twisted sort of sense if we just called do_execve.
*/
- movq %rbp, %rdi
- call *%rbx
- movl $0, RAX(%rsp)
- RESTORE_EXTRA_REGS
- jmp int_ret_from_sys_call
+
+1:
+ movq %rsp, %rdi
+ call syscall_return_slowpath /* returns with IRQs disabled */
+ TRACE_IRQS_ON /* user mode is traced as IRQS on */
+ SWAPGS
+ jmp restore_regs_and_iret
END(ret_from_fork)
/*