Initial import

1 files changed, 918 insertions, 0 deletions

diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
new file mode 100644
index 000000000..2d2a237f2
--- /dev/null
+++ b/arch/x86/kernel/mpparse.c
@@ -0,0 +1,918 @@
+/*
+ *	Intel Multiprocessor Specification 1.1 and 1.4
+ *	compliant MP-table parsing routines.
+ *
+ *	(c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
+ *	(c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
+ *      (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/pgalloc.h>
+#include <asm/io_apic.h>
+#include <asm/proto.h>
+#include <asm/bios_ebda.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+#include <asm/smp.h>
+
+#include <asm/apic.h>
+/*
+ * Checksum an MP configuration block.
+ */
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+int __init default_mpc_apic_id(struct mpc_cpu *m)
+{
+	return m->apicid;
+}
+
+static void __init MP_processor_info(struct mpc_cpu *m)
+{
+	int apicid;
+	char *bootup_cpu = "";
+
+	if (!(m->cpuflag & CPU_ENABLED)) {
+		disabled_cpus++;
+		return;
+	}
+
+	apicid = x86_init.mpparse.mpc_apic_id(m);
+
+	if (m->cpuflag & CPU_BOOTPROCESSOR) {
+		bootup_cpu = " (Bootup-CPU)";
+		boot_cpu_physical_apicid = m->apicid;
+	}
+
+	pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
+	generic_processor_info(apicid, m->apicver);
+}
+
+#ifdef CONFIG_X86_IO_APIC
+void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str)
+{
+	memcpy(str, m->bustype, 6);
+	str[6] = 0;
+	apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
+}
+
+static void __init MP_bus_info(struct mpc_bus *m)
+{
+	char str[7];
+
+	x86_init.mpparse.mpc_oem_bus_info(m, str);
+
+#if MAX_MP_BUSSES < 256
+	if (m->busid >= MAX_MP_BUSSES) {
+		pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
+			m->busid, str, MAX_MP_BUSSES - 1);
+		return;
+	}
+#endif
+
+	set_bit(m->busid, mp_bus_not_pci);
+	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
+#ifdef CONFIG_EISA
+		mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
+#endif
+	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
+		if (x86_init.mpparse.mpc_oem_pci_bus)
+			x86_init.mpparse.mpc_oem_pci_bus(m);
+
+		clear_bit(m->busid, mp_bus_not_pci);
+#ifdef CONFIG_EISA
+		mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
+	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
+		mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
+#endif
+	} else
+		pr_warn("Unknown bustype %s - ignoring\n", str);
+}
+
+static struct irq_domain_ops mp_ioapic_irqdomain_ops = {
+	.map = mp_irqdomain_map,
+	.unmap = mp_irqdomain_unmap,
+};
+
+static void __init MP_ioapic_info(struct mpc_ioapic *m)
+{
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_LEGACY,
+		.ops = &mp_ioapic_irqdomain_ops,
+	};
+
+	if (m->flags & MPC_APIC_USABLE)
+		mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
+}
+
+static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
+{
+	apic_printk(APIC_VERBOSE,
+		"Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
+		mp_irq->irqtype, mp_irq->irqflag & 3,
+		(mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
+		mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
+}
+
+#else /* CONFIG_X86_IO_APIC */
+static inline void __init MP_bus_info(struct mpc_bus *m) {}
+static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
+#endif /* CONFIG_X86_IO_APIC */
+
+static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
+{
+	apic_printk(APIC_VERBOSE,
+		"Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
+		m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
+		m->srcbusirq, m->destapic, m->destapiclint);
+}
+
+/*
+ * Read/parse the MPC
+ */
+static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
+{
+
+	if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
+		pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
+		       mpc->signature[0], mpc->signature[1],
+		       mpc->signature[2], mpc->signature[3]);
+		return 0;
+	}
+	if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
+		pr_err("MPTABLE: checksum error!\n");
+		return 0;
+	}
+	if (mpc->spec != 0x01 && mpc->spec != 0x04) {
+		pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
+		return 0;
+	}
+	if (!mpc->lapic) {
+		pr_err("MPTABLE: null local APIC address!\n");
+		return 0;
+	}
+	memcpy(oem, mpc->oem, 8);
+	oem[8] = 0;
+	pr_info("MPTABLE: OEM ID: %s\n", oem);
+
+	memcpy(str, mpc->productid, 12);
+	str[12] = 0;
+
+	pr_info("MPTABLE: Product ID: %s\n", str);
+
+	pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
+
+	return 1;
+}
+
+static void skip_entry(unsigned char **ptr, int *count, int size)
+{
+	*ptr += size;
+	*count += size;
+}
+
+static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
+{
+	pr_err("Your mptable is wrong, contact your HW vendor!\n");
+	pr_cont("type %x\n", *mpt);
+	print_hex_dump(KERN_ERR, "  ", DUMP_PREFIX_ADDRESS, 16,
+			1, mpc, mpc->length, 1);
+}
+
+void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
+
+static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
+{
+	char str[16];
+	char oem[10];
+
+	int count = sizeof(*mpc);
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+	if (!smp_check_mpc(mpc, oem, str))
+		return 0;
+
+	/* Initialize the lapic mapping */
+	if (!acpi_lapic)
+		register_lapic_address(mpc->lapic);
+
+	if (early)
+		return 1;
+
+	if (mpc->oemptr)
+		x86_init.mpparse.smp_read_mpc_oem(mpc);
+
+	/*
+	 *      Now process the configuration blocks.
+	 */
+	x86_init.mpparse.mpc_record(0);
+
+	while (count < mpc->length) {
+		switch (*mpt) {
+		case MP_PROCESSOR:
+			/* ACPI may have already provided this data */
+			if (!acpi_lapic)
+				MP_processor_info((struct mpc_cpu *)mpt);
+			skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
+			break;
+		case MP_BUS:
+			MP_bus_info((struct mpc_bus *)mpt);
+			skip_entry(&mpt, &count, sizeof(struct mpc_bus));
+			break;
+		case MP_IOAPIC:
+			MP_ioapic_info((struct mpc_ioapic *)mpt);
+			skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
+			break;
+		case MP_INTSRC:
+			mp_save_irq((struct mpc_intsrc *)mpt);
+			skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
+			break;
+		case MP_LINTSRC:
+			MP_lintsrc_info((struct mpc_lintsrc *)mpt);
+			skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
+			break;
+		default:
+			/* wrong mptable */
+			smp_dump_mptable(mpc, mpt);
+			count = mpc->length;
+			break;
+		}
+		x86_init.mpparse.mpc_record(1);
+	}
+
+	if (!num_processors)
+		pr_err("MPTABLE: no processors registered!\n");
+	return num_processors;
+}
+
+#ifdef CONFIG_X86_IO_APIC
+
+static int __init ELCR_trigger(unsigned int irq)
+{
+	unsigned int port;
+
+	port = 0x4d0 + (irq >> 3);
+	return (inb(port) >> (irq & 7)) & 1;
+}
+
+static void __init construct_default_ioirq_mptable(int mpc_default_type)
+{
+	struct mpc_intsrc intsrc;
+	int i;
+	int ELCR_fallback = 0;
+
+	intsrc.type = MP_INTSRC;
+	intsrc.irqflag = 0;	/* conforming */
+	intsrc.srcbus = 0;
+	intsrc.dstapic = mpc_ioapic_id(0);
+
+	intsrc.irqtype = mp_INT;
+
+	/*
+	 *  If true, we have an ISA/PCI system with no IRQ entries
+	 *  in the MP table. To prevent the PCI interrupts from being set up
+	 *  incorrectly, we try to use the ELCR. The sanity check to see if
+	 *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
+	 *  never be level sensitive, so we simply see if the ELCR agrees.
+	 *  If it does, we assume it's valid.
+	 */
+	if (mpc_default_type == 5) {
+		pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+
+		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
+		    ELCR_trigger(13))
+			pr_err("ELCR contains invalid data... not using ELCR\n");
+		else {
+			pr_info("Using ELCR to identify PCI interrupts\n");
+			ELCR_fallback = 1;
+		}
+	}
+
+	for (i = 0; i < 16; i++) {
+		switch (mpc_default_type) {
+		case 2:
+			if (i == 0 || i == 13)
+				continue;	/* IRQ0 & IRQ13 not connected */
+			/* fall through */
+		default:
+			if (i == 2)
+				continue;	/* IRQ2 is never connected */
+		}
+
+		if (ELCR_fallback) {
+			/*
+			 *  If the ELCR indicates a level-sensitive interrupt, we
+			 *  copy that information over to the MP table in the
+			 *  irqflag field (level sensitive, active high polarity).
+			 */
+			if (ELCR_trigger(i))
+				intsrc.irqflag = 13;
+			else
+				intsrc.irqflag = 0;
+		}
+
+		intsrc.srcbusirq = i;
+		intsrc.dstirq = i ? i : 2;	/* IRQ0 to INTIN2 */
+		mp_save_irq(&intsrc);
+	}
+
+	intsrc.irqtype = mp_ExtINT;
+	intsrc.srcbusirq = 0;
+	intsrc.dstirq = 0;	/* 8259A to INTIN0 */
+	mp_save_irq(&intsrc);
+}
+
+
+static void __init construct_ioapic_table(int mpc_default_type)
+{
+	struct mpc_ioapic ioapic;
+	struct mpc_bus bus;
+
+	bus.type = MP_BUS;
+	bus.busid = 0;
+	switch (mpc_default_type) {
+	default:
+		pr_err("???\nUnknown standard configuration %d\n",
+		       mpc_default_type);
+		/* fall through */
+	case 1:
+	case 5:
+		memcpy(bus.bustype, "ISA   ", 6);
+		break;
+	case 2:
+	case 6:
+	case 3:
+		memcpy(bus.bustype, "EISA  ", 6);
+		break;
+	}
+	MP_bus_info(&bus);
+	if (mpc_default_type > 4) {
+		bus.busid = 1;
+		memcpy(bus.bustype, "PCI   ", 6);
+		MP_bus_info(&bus);
+	}
+
+	ioapic.type	= MP_IOAPIC;
+	ioapic.apicid	= 2;
+	ioapic.apicver	= mpc_default_type > 4 ? 0x10 : 0x01;
+	ioapic.flags	= MPC_APIC_USABLE;
+	ioapic.apicaddr	= IO_APIC_DEFAULT_PHYS_BASE;
+	MP_ioapic_info(&ioapic);
+
+	/*
+	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
+	 */
+	construct_default_ioirq_mptable(mpc_default_type);
+}
+#else
+static inline void __init construct_ioapic_table(int mpc_default_type) { }
+#endif
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+	struct mpc_cpu processor;
+	struct mpc_lintsrc lintsrc;
+	int linttypes[2] = { mp_ExtINT, mp_NMI };
+	int i;
+
+	/*
+	 * local APIC has default address
+	 */
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/*
+	 * 2 CPUs, numbered 0 & 1.
+	 */
+	processor.type = MP_PROCESSOR;
+	/* Either an integrated APIC or a discrete 82489DX. */
+	processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+	processor.cpuflag = CPU_ENABLED;
+	processor.cpufeature = (boot_cpu_data.x86 << 8) |
+	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+	processor.featureflag = boot_cpu_data.x86_capability[0];
+	processor.reserved[0] = 0;
+	processor.reserved[1] = 0;
+	for (i = 0; i < 2; i++) {
+		processor.apicid = i;
+		MP_processor_info(&processor);
+	}
+
+	construct_ioapic_table(mpc_default_type);
+
+	lintsrc.type = MP_LINTSRC;
+	lintsrc.irqflag = 0;		/* conforming */
+	lintsrc.srcbusid = 0;
+	lintsrc.srcbusirq = 0;
+	lintsrc.destapic = MP_APIC_ALL;
+	for (i = 0; i < 2; i++) {
+		lintsrc.irqtype = linttypes[i];
+		lintsrc.destapiclint = i;
+		MP_lintsrc_info(&lintsrc);
+	}
+}
+
+static struct mpf_intel *mpf_found;
+
+static unsigned long __init get_mpc_size(unsigned long physptr)
+{
+	struct mpc_table *mpc;
+	unsigned long size;
+
+	mpc = early_ioremap(physptr, PAGE_SIZE);
+	size = mpc->length;
+	early_iounmap(mpc, PAGE_SIZE);
+	apic_printk(APIC_VERBOSE, "  mpc: %lx-%lx\n", physptr, physptr + size);
+
+	return size;
+}
+
+static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
+{
+	struct mpc_table *mpc;
+	unsigned long size;
+
+	size = get_mpc_size(mpf->physptr);
+	mpc = early_ioremap(mpf->physptr, size);
+	/*
+	 * Read the physical hardware table.  Anything here will
+	 * override the defaults.
+	 */
+	if (!smp_read_mpc(mpc, early)) {
+#ifdef CONFIG_X86_LOCAL_APIC
+		smp_found_config = 0;
+#endif
+		pr_err("BIOS bug, MP table errors detected!...\n");
+		pr_cont("... disabling SMP support. (tell your hw vendor)\n");
+		early_iounmap(mpc, size);
+		return -1;
+	}
+	early_iounmap(mpc, size);
+
+	if (early)
+		return -1;
+
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * If there are no explicit MP IRQ entries, then we are
+	 * broken.  We set up most of the low 16 IO-APIC pins to
+	 * ISA defaults and hope it will work.
+	 */
+	if (!mp_irq_entries) {
+		struct mpc_bus bus;
+
+		pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+
+		bus.type = MP_BUS;
+		bus.busid = 0;
+		memcpy(bus.bustype, "ISA   ", 6);
+		MP_bus_info(&bus);
+
+		construct_default_ioirq_mptable(0);
+	}
+#endif
+
+	return 0;
+}
+
+/*
+ * Scan the memory blocks for an SMP configuration block.
+ */
+void __init default_get_smp_config(unsigned int early)
+{
+	struct mpf_intel *mpf = mpf_found;
+
+	if (!mpf)
+		return;
+
+	if (acpi_lapic && early)
+		return;
+
+	/*
+	 * MPS doesn't support hyperthreading, aka only have
+	 * thread 0 apic id in MPS table
+	 */
+	if (acpi_lapic && acpi_ioapic)
+		return;
+
+	pr_info("Intel MultiProcessor Specification v1.%d\n",
+		mpf->specification);
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
+	if (mpf->feature2 & (1 << 7)) {
+		pr_info("    IMCR and PIC compatibility mode.\n");
+		pic_mode = 1;
+	} else {
+		pr_info("    Virtual Wire compatibility mode.\n");
+		pic_mode = 0;
+	}
+#endif
+	/*
+	 * Now see if we need to read further.
+	 */
+	if (mpf->feature1 != 0) {
+		if (early) {
+			/*
+			 * local APIC has default address
+			 */
+			mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+			return;
+		}
+
+		pr_info("Default MP configuration #%d\n", mpf->feature1);
+		construct_default_ISA_mptable(mpf->feature1);
+
+	} else if (mpf->physptr) {
+		if (check_physptr(mpf, early))
+			return;
+	} else
+		BUG();
+
+	if (!early)
+		pr_info("Processors: %d\n", num_processors);
+	/*
+	 * Only use the first configuration found.
+	 */
+}
+
+static void __init smp_reserve_memory(struct mpf_intel *mpf)
+{
+	memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
+}
+
+static int __init smp_scan_config(unsigned long base, unsigned long length)
+{
+	unsigned int *bp = phys_to_virt(base);
+	struct mpf_intel *mpf;
+	unsigned long mem;
+
+	apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
+		    base, base + length - 1);
+	BUILD_BUG_ON(sizeof(*mpf) != 16);
+
+	while (length > 0) {
+		mpf = (struct mpf_intel *)bp;
+		if ((*bp == SMP_MAGIC_IDENT) &&
+		    (mpf->length == 1) &&
+		    !mpf_checksum((unsigned char *)bp, 16) &&
+		    ((mpf->specification == 1)
+		     || (mpf->specification == 4))) {
+#ifdef CONFIG_X86_LOCAL_APIC
+			smp_found_config = 1;
+#endif
+			mpf_found = mpf;
+
+			pr_info("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n",
+				(unsigned long long) virt_to_phys(mpf),
+				(unsigned long long) virt_to_phys(mpf) +
+				sizeof(*mpf) - 1, mpf);
+
+			mem = virt_to_phys(mpf);
+			memblock_reserve(mem, sizeof(*mpf));
+			if (mpf->physptr)
+				smp_reserve_memory(mpf);
+
+			return 1;
+		}
+		bp += 4;
+		length -= 16;
+	}
+	return 0;
+}
+
+void __init default_find_smp_config(void)
+{
+	unsigned int address;
+
+	/*
+	 * FIXME: Linux assumes you have 640K of base ram..
+	 * this continues the error...
+	 *
+	 * 1) Scan the bottom 1K for a signature
+	 * 2) Scan the top 1K of base RAM
+	 * 3) Scan the 64K of bios
+	 */
+	if (smp_scan_config(0x0, 0x400) ||
+	    smp_scan_config(639 * 0x400, 0x400) ||
+	    smp_scan_config(0xF0000, 0x10000))
+		return;
+	/*
+	 * If it is an SMP machine we should know now, unless the
+	 * configuration is in an EISA bus machine with an
+	 * extended bios data area.
+	 *
+	 * there is a real-mode segmented pointer pointing to the
+	 * 4K EBDA area at 0x40E, calculate and scan it here.
+	 *
+	 * NOTE! There are Linux loaders that will corrupt the EBDA
+	 * area, and as such this kind of SMP config may be less
+	 * trustworthy, simply because the SMP table may have been
+	 * stomped on during early boot. These loaders are buggy and
+	 * should be fixed.
+	 *
+	 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
+	 */
+
+	address = get_bios_ebda();
+	if (address)
+		smp_scan_config(address, 0x400);
+}
+
+#ifdef CONFIG_X86_IO_APIC
+static u8 __initdata irq_used[MAX_IRQ_SOURCES];
+
+static int  __init get_MP_intsrc_index(struct mpc_intsrc *m)
+{
+	int i;
+
+	if (m->irqtype != mp_INT)
+		return 0;
+
+	if (m->irqflag != 0x0f)
+		return 0;
+
+	/* not legacy */
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (mp_irqs[i].irqtype != mp_INT)
+			continue;
+
+		if (mp_irqs[i].irqflag != 0x0f)
+			continue;
+
+		if (mp_irqs[i].srcbus != m->srcbus)
+			continue;
+		if (mp_irqs[i].srcbusirq != m->srcbusirq)
+			continue;
+		if (irq_used[i]) {
+			/* already claimed */
+			return -2;
+		}
+		irq_used[i] = 1;
+		return i;
+	}
+
+	/* not found */
+	return -1;
+}
+
+#define SPARE_SLOT_NUM 20
+
+static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
+
+static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
+{
+	int i;
+
+	apic_printk(APIC_VERBOSE, "OLD ");
+	print_mp_irq_info(m);
+
+	i = get_MP_intsrc_index(m);
+	if (i > 0) {
+		memcpy(m, &mp_irqs[i], sizeof(*m));
+		apic_printk(APIC_VERBOSE, "NEW ");
+		print_mp_irq_info(&mp_irqs[i]);
+		return;
+	}
+	if (!i) {
+		/* legacy, do nothing */
+		return;
+	}
+	if (*nr_m_spare < SPARE_SLOT_NUM) {
+		/*
+		 * not found (-1), or duplicated (-2) are invalid entries,
+		 * we need to use the slot later
+		 */
+		m_spare[*nr_m_spare] = m;
+		*nr_m_spare += 1;
+	}
+}
+
+static int __init
+check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
+{
+	if (!mpc_new_phys || count <= mpc_new_length) {
+		WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
+		return -1;
+	}
+
+	return 0;
+}
+#else /* CONFIG_X86_IO_APIC */
+static
+inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
+#endif /* CONFIG_X86_IO_APIC */
+
+static int  __init replace_intsrc_all(struct mpc_table *mpc,
+					unsigned long mpc_new_phys,
+					unsigned long mpc_new_length)
+{
+#ifdef CONFIG_X86_IO_APIC
+	int i;
+#endif
+	int count = sizeof(*mpc);
+	int nr_m_spare = 0;
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+	pr_info("mpc_length %x\n", mpc->length);
+	while (count < mpc->length) {
+		switch (*mpt) {
+		case MP_PROCESSOR:
+			skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
+			break;
+		case MP_BUS:
+			skip_entry(&mpt, &count, sizeof(struct mpc_bus));
+			break;
+		case MP_IOAPIC:
+			skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
+			break;
+		case MP_INTSRC:
+			check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
+			skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
+			break;
+		case MP_LINTSRC:
+			skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
+			break;
+		default:
+			/* wrong mptable */
+			smp_dump_mptable(mpc, mpt);
+			goto out;
+		}
+	}
+
+#ifdef CONFIG_X86_IO_APIC
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (irq_used[i])
+			continue;
+
+		if (mp_irqs[i].irqtype != mp_INT)
+			continue;
+
+		if (mp_irqs[i].irqflag != 0x0f)
+			continue;
+
+		if (nr_m_spare > 0) {
+			apic_printk(APIC_VERBOSE, "*NEW* found\n");
+			nr_m_spare--;
+			memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
+			m_spare[nr_m_spare] = NULL;
+		} else {
+			struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
+			count += sizeof(struct mpc_intsrc);
+			if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
+				goto out;
+			memcpy(m, &mp_irqs[i], sizeof(*m));
+			mpc->length = count;
+			mpt += sizeof(struct mpc_intsrc);
+		}
+		print_mp_irq_info(&mp_irqs[i]);
+	}
+#endif
+out:
+	/* update checksum */
+	mpc->checksum = 0;
+	mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
+
+	return 0;
+}
+
+int enable_update_mptable;
+
+static int __init update_mptable_setup(char *str)
+{
+	enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+	pci_routeirq = 1;
+#endif
+	return 0;
+}
+early_param("update_mptable", update_mptable_setup);
+
+static unsigned long __initdata mpc_new_phys;
+static unsigned long mpc_new_length __initdata = 4096;
+
+/* alloc_mptable or alloc_mptable=4k */
+static int __initdata alloc_mptable;
+static int __init parse_alloc_mptable_opt(char *p)
+{
+	enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+	pci_routeirq = 1;
+#endif
+	alloc_mptable = 1;
+	if (!p)
+		return 0;
+	mpc_new_length = memparse(p, &p);
+	return 0;
+}
+early_param("alloc_mptable", parse_alloc_mptable_opt);
+
+void __init early_reserve_e820_mpc_new(void)
+{
+	if (enable_update_mptable && alloc_mptable)
+		mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
+}
+
+static int __init update_mp_table(void)
+{
+	char str[16];
+	char oem[10];
+	struct mpf_intel *mpf;
+	struct mpc_table *mpc, *mpc_new;
+
+	if (!enable_update_mptable)
+		return 0;
+
+	mpf = mpf_found;
+	if (!mpf)
+		return 0;
+
+	/*
+	 * Now see if we need to go further.
+	 */
+	if (mpf->feature1 != 0)
+		return 0;
+
+	if (!mpf->physptr)
+		return 0;
+
+	mpc = phys_to_virt(mpf->physptr);
+
+	if (!smp_check_mpc(mpc, oem, str))
+		return 0;
+
+	pr_info("mpf: %llx\n", (u64)virt_to_phys(mpf));
+	pr_info("physptr: %x\n", mpf->physptr);
+
+	if (mpc_new_phys && mpc->length > mpc_new_length) {
+		mpc_new_phys = 0;
+		pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
+			mpc_new_length);
+	}
+
+	if (!mpc_new_phys) {
+		unsigned char old, new;
+		/* check if we can change the position */
+		mpc->checksum = 0;
+		old = mpf_checksum((unsigned char *)mpc, mpc->length);
+		mpc->checksum = 0xff;
+		new = mpf_checksum((unsigned char *)mpc, mpc->length);
+		if (old == new) {
+			pr_info("mpc is readonly, please try alloc_mptable instead\n");
+			return 0;
+		}
+		pr_info("use in-position replacing\n");
+	} else {
+		mpf->physptr = mpc_new_phys;
+		mpc_new = phys_to_virt(mpc_new_phys);
+		memcpy(mpc_new, mpc, mpc->length);
+		mpc = mpc_new;
+		/* check if we can modify that */
+		if (mpc_new_phys - mpf->physptr) {
+			struct mpf_intel *mpf_new;
+			/* steal 16 bytes from [0, 1k) */
+			pr_info("mpf new: %x\n", 0x400 - 16);
+			mpf_new = phys_to_virt(0x400 - 16);
+			memcpy(mpf_new, mpf, 16);
+			mpf = mpf_new;
+			mpf->physptr = mpc_new_phys;
+		}
+		mpf->checksum = 0;
+		mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
+		pr_info("physptr new: %x\n", mpf->physptr);
+	}
+
+	/*
+	 * only replace the one with mp_INT and
+	 *	 MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
+	 * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
+	 * may need pci=routeirq for all coverage
+	 */
+	replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
+
+	return 0;
+}
+
+late_initcall(update_mp_table);