Initial import

1 files changed, 536 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
new file mode 100644
index 000000000..c161dd974
--- /dev/null
+++ b/drivers/acpi/acpica/exfield.c
@@ -0,0 +1,536 @@
+/******************************************************************************
+ *
+ * Module Name: exfield - ACPI AML (p-code) execution - field manipulation
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "amlcode.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exfield")
+
+/* Local prototypes */
+static u32
+acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_get_serial_access_length
+ *
+ * PARAMETERS:  accessor_type   - The type of the protocol indicated by region
+ *                                field access attributes
+ *              access_length   - The access length of the region field
+ *
+ * RETURN:      Decoded access length
+ *
+ * DESCRIPTION: This routine returns the length of the generic_serial_bus
+ *              protocol bytes
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length)
+{
+	u32 length;
+
+	switch (accessor_type) {
+	case AML_FIELD_ATTRIB_QUICK:
+
+		length = 0;
+		break;
+
+	case AML_FIELD_ATTRIB_SEND_RCV:
+	case AML_FIELD_ATTRIB_BYTE:
+
+		length = 1;
+		break;
+
+	case AML_FIELD_ATTRIB_WORD:
+	case AML_FIELD_ATTRIB_WORD_CALL:
+
+		length = 2;
+		break;
+
+	case AML_FIELD_ATTRIB_MULTIBYTE:
+	case AML_FIELD_ATTRIB_RAW_BYTES:
+	case AML_FIELD_ATTRIB_RAW_PROCESS:
+
+		length = access_length;
+		break;
+
+	case AML_FIELD_ATTRIB_BLOCK:
+	case AML_FIELD_ATTRIB_BLOCK_CALL:
+	default:
+
+		length = ACPI_GSBUS_BUFFER_SIZE - 2;
+		break;
+	}
+
+	return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_read_data_from_field
+ *
+ * PARAMETERS:  walk_state          - Current execution state
+ *              obj_desc            - The named field
+ *              ret_buffer_desc     - Where the return data object is stored
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
+ *              Buffer, depending on the size of the field.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_read_data_from_field(struct acpi_walk_state * walk_state,
+			     union acpi_operand_object *obj_desc,
+			     union acpi_operand_object **ret_buffer_desc)
+{
+	acpi_status status;
+	union acpi_operand_object *buffer_desc;
+	acpi_size length;
+	void *buffer;
+	u32 function;
+	u16 accessor_type;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);
+
+	/* Parameter validation */
+
+	if (!obj_desc) {
+		return_ACPI_STATUS(AE_AML_NO_OPERAND);
+	}
+	if (!ret_buffer_desc) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments(obj_desc);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		}
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_SMBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_GSBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_IPMI)) {
+		/*
+		 * This is an SMBus, GSBus or IPMI read. We must create a buffer to hold
+		 * the data and then directly access the region handler.
+		 *
+		 * Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function
+		 */
+		if (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_SMBUS) {
+			length = ACPI_SMBUS_BUFFER_SIZE;
+			function =
+			    ACPI_READ | (obj_desc->field.attribute << 16);
+		} else if (obj_desc->field.region_obj->region.space_id ==
+			   ACPI_ADR_SPACE_GSBUS) {
+			accessor_type = obj_desc->field.attribute;
+			length = acpi_ex_get_serial_access_length(accessor_type,
+								  obj_desc->
+								  field.
+								  access_length);
+
+			/*
+			 * Add additional 2 bytes for the generic_serial_bus data buffer:
+			 *
+			 *     Status;      (Byte 0 of the data buffer)
+			 *     Length;      (Byte 1 of the data buffer)
+			 *     Data[x-1];   (Bytes 2-x of the arbitrary length data buffer)
+			 */
+			length += 2;
+			function = ACPI_READ | (accessor_type << 16);
+		} else {	/* IPMI */
+
+			length = ACPI_IPMI_BUFFER_SIZE;
+			function = ACPI_READ;
+		}
+
+		buffer_desc = acpi_ut_create_buffer_object(length);
+		if (!buffer_desc) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		/* Lock entire transaction if requested */
+
+		acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+		/* Call the region handler for the read */
+
+		status = acpi_ex_access_region(obj_desc, 0,
+					       ACPI_CAST_PTR(u64,
+							     buffer_desc->
+							     buffer.pointer),
+					       function);
+		acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+		goto exit;
+	}
+
+	/*
+	 * Allocate a buffer for the contents of the field.
+	 *
+	 * If the field is larger than the current integer width, create
+	 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
+	 * the use of arithmetic operators on the returned value if the
+	 * field size is equal or smaller than an Integer.
+	 *
+	 * Note: Field.length is in bits.
+	 */
+	length =
+	    (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length);
+	if (length > acpi_gbl_integer_byte_width) {
+
+		/* Field is too large for an Integer, create a Buffer instead */
+
+		buffer_desc = acpi_ut_create_buffer_object(length);
+		if (!buffer_desc) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+		buffer = buffer_desc->buffer.pointer;
+	} else {
+		/* Field will fit within an Integer (normal case) */
+
+		buffer_desc = acpi_ut_create_integer_object((u64) 0);
+		if (!buffer_desc) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		length = acpi_gbl_integer_byte_width;
+		buffer = &buffer_desc->integer.value;
+	}
+
+	if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+	    (obj_desc->field.region_obj->region.space_id ==
+	     ACPI_ADR_SPACE_GPIO)) {
+		/*
+		 * For GPIO (general_purpose_io), the Address will be the bit offset
+		 * from the previous Connection() operator, making it effectively a
+		 * pin number index. The bit_length is the length of the field, which
+		 * is thus the number of pins.
+		 */
+		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+				  "GPIO FieldRead [FROM]:  Pin %u Bits %u\n",
+				  obj_desc->field.pin_number_index,
+				  obj_desc->field.bit_length));
+
+		/* Lock entire transaction if requested */
+
+		acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+		/* Perform the write */
+
+		status = acpi_ex_access_region(obj_desc, 0,
+					       (u64 *)buffer, ACPI_READ);
+		acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+		if (ACPI_FAILURE(status)) {
+			acpi_ut_remove_reference(buffer_desc);
+		} else {
+			*ret_buffer_desc = buffer_desc;
+		}
+		return_ACPI_STATUS(status);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldRead [TO]:   Obj %p, Type %X, Buf %p, ByteLen %X\n",
+			  obj_desc, obj_desc->common.type, buffer,
+			  (u32) length));
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n",
+			  obj_desc->common_field.bit_length,
+			  obj_desc->common_field.start_field_bit_offset,
+			  obj_desc->common_field.base_byte_offset));
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Read from the field */
+
+	status = acpi_ex_extract_from_field(obj_desc, buffer, (u32) length);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+exit:
+	if (ACPI_FAILURE(status)) {
+		acpi_ut_remove_reference(buffer_desc);
+	} else {
+		*ret_buffer_desc = buffer_desc;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_write_data_to_field
+ *
+ * PARAMETERS:  source_desc         - Contains data to write
+ *              obj_desc            - The named field
+ *              result_desc         - Where the return value is returned, if any
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Write to a named field
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
+			    union acpi_operand_object *obj_desc,
+			    union acpi_operand_object **result_desc)
+{
+	acpi_status status;
+	u32 length;
+	void *buffer;
+	union acpi_operand_object *buffer_desc;
+	u32 function;
+	u16 accessor_type;
+
+	ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);
+
+	/* Parameter validation */
+
+	if (!source_desc || !obj_desc) {
+		return_ACPI_STATUS(AE_AML_NO_OPERAND);
+	}
+
+	if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments(obj_desc);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		}
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_SMBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_GSBUS
+		    || obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_IPMI)) {
+		/*
+		 * This is an SMBus, GSBus or IPMI write. We will bypass the entire field
+		 * mechanism and handoff the buffer directly to the handler. For
+		 * these address spaces, the buffer is bi-directional; on a write,
+		 * return data is returned in the same buffer.
+		 *
+		 * Source must be a buffer of sufficient size:
+		 * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
+		 *
+		 * Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function
+		 */
+		if (source_desc->common.type != ACPI_TYPE_BUFFER) {
+			ACPI_ERROR((AE_INFO,
+				    "SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s",
+				    acpi_ut_get_object_type_name(source_desc)));
+
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+		}
+
+		if (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_SMBUS) {
+			length = ACPI_SMBUS_BUFFER_SIZE;
+			function =
+			    ACPI_WRITE | (obj_desc->field.attribute << 16);
+		} else if (obj_desc->field.region_obj->region.space_id ==
+			   ACPI_ADR_SPACE_GSBUS) {
+			accessor_type = obj_desc->field.attribute;
+			length = acpi_ex_get_serial_access_length(accessor_type,
+								  obj_desc->
+								  field.
+								  access_length);
+
+			/*
+			 * Add additional 2 bytes for the generic_serial_bus data buffer:
+			 *
+			 *     Status;      (Byte 0 of the data buffer)
+			 *     Length;      (Byte 1 of the data buffer)
+			 *     Data[x-1];   (Bytes 2-x of the arbitrary length data buffer)
+			 */
+			length += 2;
+			function = ACPI_WRITE | (accessor_type << 16);
+		} else {	/* IPMI */
+
+			length = ACPI_IPMI_BUFFER_SIZE;
+			function = ACPI_WRITE;
+		}
+
+		if (source_desc->buffer.length < length) {
+			ACPI_ERROR((AE_INFO,
+				    "SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u",
+				    length, source_desc->buffer.length));
+
+			return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
+		}
+
+		/* Create the bi-directional buffer */
+
+		buffer_desc = acpi_ut_create_buffer_object(length);
+		if (!buffer_desc) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		buffer = buffer_desc->buffer.pointer;
+		ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length);
+
+		/* Lock entire transaction if requested */
+
+		acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+		/*
+		 * Perform the write (returns status and perhaps data in the
+		 * same buffer)
+		 */
+		status = acpi_ex_access_region(obj_desc, 0,
+					       (u64 *) buffer, function);
+		acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+		*result_desc = buffer_desc;
+		return_ACPI_STATUS(status);
+	} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+		   (obj_desc->field.region_obj->region.space_id ==
+		    ACPI_ADR_SPACE_GPIO)) {
+		/*
+		 * For GPIO (general_purpose_io), we will bypass the entire field
+		 * mechanism and handoff the bit address and bit width directly to
+		 * the handler. The Address will be the bit offset
+		 * from the previous Connection() operator, making it effectively a
+		 * pin number index. The bit_length is the length of the field, which
+		 * is thus the number of pins.
+		 */
+		if (source_desc->common.type != ACPI_TYPE_INTEGER) {
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+		}
+
+		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+				  "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X  [TO]:  Pin %u Bits %u\n",
+				  acpi_ut_get_type_name(source_desc->common.
+							type),
+				  source_desc->common.type,
+				  (u32)source_desc->integer.value,
+				  obj_desc->field.pin_number_index,
+				  obj_desc->field.bit_length));
+
+		buffer = &source_desc->integer.value;
+
+		/* Lock entire transaction if requested */
+
+		acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+		/* Perform the write */
+
+		status = acpi_ex_access_region(obj_desc, 0,
+					       (u64 *)buffer, ACPI_WRITE);
+		acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+		return_ACPI_STATUS(status);
+	}
+
+	/* Get a pointer to the data to be written */
+
+	switch (source_desc->common.type) {
+	case ACPI_TYPE_INTEGER:
+
+		buffer = &source_desc->integer.value;
+		length = sizeof(source_desc->integer.value);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+
+		buffer = source_desc->buffer.pointer;
+		length = source_desc->buffer.length;
+		break;
+
+	case ACPI_TYPE_STRING:
+
+		buffer = source_desc->string.pointer;
+		length = source_desc->string.length;
+		break;
+
+	default:
+
+		return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n",
+			  source_desc,
+			  acpi_ut_get_type_name(source_desc->common.type),
+			  source_desc->common.type, buffer, length));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+			  "FieldWrite [TO]:   Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n",
+			  obj_desc,
+			  acpi_ut_get_type_name(obj_desc->common.type),
+			  obj_desc->common.type,
+			  obj_desc->common_field.bit_length,
+			  obj_desc->common_field.start_field_bit_offset,
+			  obj_desc->common_field.base_byte_offset));
+
+	/* Lock entire transaction if requested */
+
+	acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+	/* Write to the field */
+
+	status = acpi_ex_insert_into_field(obj_desc, buffer, length);
+	acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+
+	return_ACPI_STATUS(status);
+}