Initial import

1 files changed, 322 insertions, 0 deletions

diff --git a/drivers/clk/sunxi/clk-sun9i-core.c b/drivers/clk/sunxi/clk-sun9i-core.c
new file mode 100644
index 000000000..d8da77d72
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun9i-core.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/log2.h>
+
+#include "clk-factors.h"
+
+
+/**
+ * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL4
+ * PLL4 rate is calculated as follows
+ * rate = (parent_rate * n >> p) / (m + 1);
+ * parent_rate is always 24MHz
+ *
+ * p and m are named div1 and div2 in Allwinner's SDK
+ */
+
+static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
+				       u8 *n_ret, u8 *k, u8 *m_ret, u8 *p_ret)
+{
+	int n;
+	int m = 1;
+	int p = 1;
+
+	/* Normalize value to a 6 MHz multiple (24 MHz / 4) */
+	n = DIV_ROUND_UP(*freq, 6000000);
+
+	/* If n is too large switch to steps of 12 MHz */
+	if (n > 255) {
+		m = 0;
+		n = (n + 1) / 2;
+	}
+
+	/* If n is still too large switch to steps of 24 MHz */
+	if (n > 255) {
+		p = 0;
+		n = (n + 1) / 2;
+	}
+
+	/* n must be between 12 and 255 */
+	if (n > 255)
+		n = 255;
+	else if (n < 12)
+		n = 12;
+
+	*freq = ((24000000 * n) >> p) / (m + 1);
+
+	/* we were called to round the frequency, we can now return */
+	if (n_ret == NULL)
+		return;
+
+	*n_ret = n;
+	*m_ret = m;
+	*p_ret = p;
+}
+
+static struct clk_factors_config sun9i_a80_pll4_config = {
+	.mshift = 18,
+	.mwidth = 1,
+	.nshift = 8,
+	.nwidth = 8,
+	.pshift = 16,
+	.pwidth = 1,
+};
+
+static const struct factors_data sun9i_a80_pll4_data __initconst = {
+	.enable = 31,
+	.table = &sun9i_a80_pll4_config,
+	.getter = sun9i_a80_get_pll4_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_pll4_lock);
+
+static void __init sun9i_a80_pll4_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-pll4-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_pll4_data,
+			       &sun9i_a80_pll4_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_setup);
+
+
+/**
+ * sun9i_a80_get_gt_factors() - calculates m factor for GT
+ * GT rate is calculated as follows
+ * rate = parent_rate / (m + 1);
+ */
+
+static void sun9i_a80_get_gt_factors(u32 *freq, u32 parent_rate,
+				     u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u32 div;
+
+	if (parent_rate < *freq)
+		*freq = parent_rate;
+
+	div = DIV_ROUND_UP(parent_rate, *freq);
+
+	/* maximum divider is 4 */
+	if (div > 4)
+		div = 4;
+
+	*freq = parent_rate / div;
+
+	/* we were called to round the frequency, we can now return */
+	if (!m)
+		return;
+
+	*m = div;
+}
+
+static struct clk_factors_config sun9i_a80_gt_config = {
+	.mshift = 0,
+	.mwidth = 2,
+};
+
+static const struct factors_data sun9i_a80_gt_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun9i_a80_gt_config,
+	.getter = sun9i_a80_get_gt_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_gt_lock);
+
+static void __init sun9i_a80_gt_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	struct clk *gt;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-gt-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	gt = sunxi_factors_register(node, &sun9i_a80_gt_data,
+				    &sun9i_a80_gt_lock, reg);
+
+	/* The GT bus clock needs to be always enabled */
+	__clk_get(gt);
+	clk_prepare_enable(gt);
+}
+CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);
+
+
+/**
+ * sun9i_a80_get_ahb_factors() - calculates p factor for AHB0/1/2
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p;
+ */
+
+static void sun9i_a80_get_ahb_factors(u32 *freq, u32 parent_rate,
+				      u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u32 _p;
+
+	if (parent_rate < *freq)
+		*freq = parent_rate;
+
+	_p = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
+
+	/* maximum p is 3 */
+	if (_p > 3)
+		_p = 3;
+
+	*freq = parent_rate >> _p;
+
+	/* we were called to round the frequency, we can now return */
+	if (!p)
+		return;
+
+	*p = _p;
+}
+
+static struct clk_factors_config sun9i_a80_ahb_config = {
+	.pshift = 0,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun9i_a80_ahb_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun9i_a80_ahb_config,
+	.getter = sun9i_a80_get_ahb_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_ahb_lock);
+
+static void __init sun9i_a80_ahb_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-ahb-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_ahb_data,
+			       &sun9i_a80_ahb_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_ahb, "allwinner,sun9i-a80-ahb-clk", sun9i_a80_ahb_setup);
+
+
+static const struct factors_data sun9i_a80_apb0_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(0),
+	.table = &sun9i_a80_ahb_config,
+	.getter = sun9i_a80_get_ahb_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_apb0_lock);
+
+static void __init sun9i_a80_apb0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-apb0-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_apb0_data,
+			       &sun9i_a80_apb0_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_setup);
+
+
+/**
+ * sun9i_a80_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun9i_a80_get_apb1_factors(u32 *freq, u32 parent_rate,
+				       u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u32 div;
+	u8 calcm, calcp;
+
+	if (parent_rate < *freq)
+		*freq = parent_rate;
+
+	div = DIV_ROUND_UP(parent_rate, *freq);
+
+	/* Highest possible divider is 256 (p = 3, m = 31) */
+	if (div > 256)
+		div = 256;
+
+	calcp = order_base_2(div);
+	calcm = (parent_rate >> calcp) - 1;
+	*freq = (parent_rate >> calcp) / (calcm + 1);
+
+	/* we were called to round the frequency, we can now return */
+	if (n == NULL)
+		return;
+
+	*m = calcm;
+	*p = calcp;
+}
+
+static struct clk_factors_config sun9i_a80_apb1_config = {
+	.mshift = 0,
+	.mwidth = 5,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun9i_a80_apb1_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(0),
+	.table = &sun9i_a80_apb1_config,
+	.getter = sun9i_a80_get_apb1_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_apb1_lock);
+
+static void __init sun9i_a80_apb1_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (!reg) {
+		pr_err("Could not get registers for a80-apb1-clk: %s\n",
+		       node->name);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_apb1_data,
+			       &sun9i_a80_apb1_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-clk", sun9i_a80_apb1_setup);