Initial import

1 files changed, 652 insertions, 0 deletions

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
new file mode 100644
index 000000000..71dcbc64a
--- /dev/null
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -0,0 +1,652 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drmP.h>
+
+/**
+ * DOC: dp helpers
+ *
+ * These functions contain some common logic and helpers at various abstraction
+ * levels to deal with Display Port sink devices and related things like DP aux
+ * channel transfers, EDID reading over DP aux channels, decoding certain DPCD
+ * blocks, ...
+ */
+
+/* Helpers for DP link training */
+static u8 dp_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static u8 dp_get_lane_status(const u8 link_status[DP_LINK_STATUS_SIZE],
+			     int lane)
+{
+	int i = DP_LANE0_1_STATUS + (lane >> 1);
+	int s = (lane & 1) * 4;
+	u8 l = dp_link_status(link_status, i);
+	return (l >> s) & 0xf;
+}
+
+bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
+			  int lane_count)
+{
+	u8 lane_align;
+	u8 lane_status;
+	int lane;
+
+	lane_align = dp_link_status(link_status,
+				    DP_LANE_ALIGN_STATUS_UPDATED);
+	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return false;
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = dp_get_lane_status(link_status, lane);
+		if ((lane_status & DP_CHANNEL_EQ_BITS) != DP_CHANNEL_EQ_BITS)
+			return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL(drm_dp_channel_eq_ok);
+
+bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
+			      int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = dp_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return false;
+	}
+	return true;
+}
+EXPORT_SYMBOL(drm_dp_clock_recovery_ok);
+
+u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE],
+				     int lane)
+{
+	int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int s = ((lane & 1) ?
+		 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+		 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	u8 l = dp_link_status(link_status, i);
+
+	return ((l >> s) & 0x3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+EXPORT_SYMBOL(drm_dp_get_adjust_request_voltage);
+
+u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE],
+					  int lane)
+{
+	int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int s = ((lane & 1) ?
+		 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+		 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	u8 l = dp_link_status(link_status, i);
+
+	return ((l >> s) & 0x3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);
+
+void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
+	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+		udelay(100);
+	else
+		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+}
+EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
+
+void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
+	if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+		udelay(400);
+	else
+		mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+}
+EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
+
+u8 drm_dp_link_rate_to_bw_code(int link_rate)
+{
+	switch (link_rate) {
+	case 162000:
+	default:
+		return DP_LINK_BW_1_62;
+	case 270000:
+		return DP_LINK_BW_2_7;
+	case 540000:
+		return DP_LINK_BW_5_4;
+	}
+}
+EXPORT_SYMBOL(drm_dp_link_rate_to_bw_code);
+
+int drm_dp_bw_code_to_link_rate(u8 link_bw)
+{
+	switch (link_bw) {
+	case DP_LINK_BW_1_62:
+	default:
+		return 162000;
+	case DP_LINK_BW_2_7:
+		return 270000;
+	case DP_LINK_BW_5_4:
+		return 540000;
+	}
+}
+EXPORT_SYMBOL(drm_dp_bw_code_to_link_rate);
+
+/**
+ * DOC: dp helpers
+ *
+ * The DisplayPort AUX channel is an abstraction to allow generic, driver-
+ * independent access to AUX functionality. Drivers can take advantage of
+ * this by filling in the fields of the drm_dp_aux structure.
+ *
+ * Transactions are described using a hardware-independent drm_dp_aux_msg
+ * structure, which is passed into a driver's .transfer() implementation.
+ * Both native and I2C-over-AUX transactions are supported.
+ */
+
+static int drm_dp_dpcd_access(struct drm_dp_aux *aux, u8 request,
+			      unsigned int offset, void *buffer, size_t size)
+{
+	struct drm_dp_aux_msg msg;
+	unsigned int retry;
+	int err;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.address = offset;
+	msg.request = request;
+	msg.buffer = buffer;
+	msg.size = size;
+
+	/*
+	 * The specification doesn't give any recommendation on how often to
+	 * retry native transactions. We used to retry 7 times like for
+	 * aux i2c transactions but real world devices this wasn't
+	 * sufficient, bump to 32 which makes Dell 4k monitors happier.
+	 */
+	for (retry = 0; retry < 32; retry++) {
+
+		mutex_lock(&aux->hw_mutex);
+		err = aux->transfer(aux, &msg);
+		mutex_unlock(&aux->hw_mutex);
+		if (err < 0) {
+			if (err == -EBUSY)
+				continue;
+
+			return err;
+		}
+
+
+		switch (msg.reply & DP_AUX_NATIVE_REPLY_MASK) {
+		case DP_AUX_NATIVE_REPLY_ACK:
+			if (err < size)
+				return -EPROTO;
+			return err;
+
+		case DP_AUX_NATIVE_REPLY_NACK:
+			return -EIO;
+
+		case DP_AUX_NATIVE_REPLY_DEFER:
+			usleep_range(400, 500);
+			break;
+		}
+	}
+
+	DRM_DEBUG_KMS("too many retries, giving up\n");
+	return -EIO;
+}
+
+/**
+ * drm_dp_dpcd_read() - read a series of bytes from the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the (first) register to read
+ * @buffer: buffer to store the register values
+ * @size: number of bytes in @buffer
+ *
+ * Returns the number of bytes transferred on success, or a negative error
+ * code on failure. -EIO is returned if the request was NAKed by the sink or
+ * if the retry count was exceeded. If not all bytes were transferred, this
+ * function returns -EPROTO. Errors from the underlying AUX channel transfer
+ * function, with the exception of -EBUSY (which causes the transaction to
+ * be retried), are propagated to the caller.
+ */
+ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
+			 void *buffer, size_t size)
+{
+	return drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, offset, buffer,
+				  size);
+}
+EXPORT_SYMBOL(drm_dp_dpcd_read);
+
+/**
+ * drm_dp_dpcd_write() - write a series of bytes to the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the (first) register to write
+ * @buffer: buffer containing the values to write
+ * @size: number of bytes in @buffer
+ *
+ * Returns the number of bytes transferred on success, or a negative error
+ * code on failure. -EIO is returned if the request was NAKed by the sink or
+ * if the retry count was exceeded. If not all bytes were transferred, this
+ * function returns -EPROTO. Errors from the underlying AUX channel transfer
+ * function, with the exception of -EBUSY (which causes the transaction to
+ * be retried), are propagated to the caller.
+ */
+ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
+			  void *buffer, size_t size)
+{
+	return drm_dp_dpcd_access(aux, DP_AUX_NATIVE_WRITE, offset, buffer,
+				  size);
+}
+EXPORT_SYMBOL(drm_dp_dpcd_write);
+
+/**
+ * drm_dp_dpcd_read_link_status() - read DPCD link status (bytes 0x202-0x207)
+ * @aux: DisplayPort AUX channel
+ * @status: buffer to store the link status in (must be at least 6 bytes)
+ *
+ * Returns the number of bytes transferred on success or a negative error
+ * code on failure.
+ */
+int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
+				 u8 status[DP_LINK_STATUS_SIZE])
+{
+	return drm_dp_dpcd_read(aux, DP_LANE0_1_STATUS, status,
+				DP_LINK_STATUS_SIZE);
+}
+EXPORT_SYMBOL(drm_dp_dpcd_read_link_status);
+
+/**
+ * drm_dp_link_probe() - probe a DisplayPort link for capabilities
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to structure in which to return link capabilities
+ *
+ * The structure filled in by this function can usually be passed directly
+ * into drm_dp_link_power_up() and drm_dp_link_configure() to power up and
+ * configure the link based on the link's capabilities.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+	u8 values[3];
+	int err;
+
+	memset(link, 0, sizeof(*link));
+
+	err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));
+	if (err < 0)
+		return err;
+
+	link->revision = values[0];
+	link->rate = drm_dp_bw_code_to_link_rate(values[1]);
+	link->num_lanes = values[2] & DP_MAX_LANE_COUNT_MASK;
+
+	if (values[2] & DP_ENHANCED_FRAME_CAP)
+		link->capabilities |= DP_LINK_CAP_ENHANCED_FRAMING;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_link_probe);
+
+/**
+ * drm_dp_link_power_up() - power up a DisplayPort link
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to a structure containing the link configuration
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+	u8 value;
+	int err;
+
+	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
+	if (link->revision < 0x11)
+		return 0;
+
+	err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
+	if (err < 0)
+		return err;
+
+	value &= ~DP_SET_POWER_MASK;
+	value |= DP_SET_POWER_D0;
+
+	err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
+	if (err < 0)
+		return err;
+
+	/*
+	 * According to the DP 1.1 specification, a "Sink Device must exit the
+	 * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
+	 * Control Field" (register 0x600).
+	 */
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_link_power_up);
+
+/**
+ * drm_dp_link_power_down() - power down a DisplayPort link
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to a structure containing the link configuration
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+	u8 value;
+	int err;
+
+	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
+	if (link->revision < 0x11)
+		return 0;
+
+	err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
+	if (err < 0)
+		return err;
+
+	value &= ~DP_SET_POWER_MASK;
+	value |= DP_SET_POWER_D3;
+
+	err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_link_power_down);
+
+/**
+ * drm_dp_link_configure() - configure a DisplayPort link
+ * @aux: DisplayPort AUX channel
+ * @link: pointer to a structure containing the link configuration
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link)
+{
+	u8 values[2];
+	int err;
+
+	values[0] = drm_dp_link_rate_to_bw_code(link->rate);
+	values[1] = link->num_lanes;
+
+	if (link->capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+		values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+
+	err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_link_configure);
+
+/*
+ * I2C-over-AUX implementation
+ */
+
+static u32 drm_dp_i2c_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+	       I2C_FUNC_10BIT_ADDR;
+}
+
+/*
+ * Transfer a single I2C-over-AUX message and handle various error conditions,
+ * retrying the transaction as appropriate.  It is assumed that the
+ * aux->transfer function does not modify anything in the msg other than the
+ * reply field.
+ *
+ * Returns bytes transferred on success, or a negative error code on failure.
+ */
+static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
+{
+	unsigned int retry;
+	int ret;
+
+	/*
+	 * DP1.2 sections 2.7.7.1.5.6.1 and 2.7.7.1.6.6.1: A DP Source device
+	 * is required to retry at least seven times upon receiving AUX_DEFER
+	 * before giving up the AUX transaction.
+	 */
+	for (retry = 0; retry < 7; retry++) {
+		mutex_lock(&aux->hw_mutex);
+		ret = aux->transfer(aux, msg);
+		mutex_unlock(&aux->hw_mutex);
+		if (ret < 0) {
+			if (ret == -EBUSY)
+				continue;
+
+			DRM_DEBUG_KMS("transaction failed: %d\n", ret);
+			return ret;
+		}
+
+
+		switch (msg->reply & DP_AUX_NATIVE_REPLY_MASK) {
+		case DP_AUX_NATIVE_REPLY_ACK:
+			/*
+			 * For I2C-over-AUX transactions this isn't enough, we
+			 * need to check for the I2C ACK reply.
+			 */
+			break;
+
+		case DP_AUX_NATIVE_REPLY_NACK:
+			DRM_DEBUG_KMS("native nack (result=%d, size=%zu)\n", ret, msg->size);
+			return -EREMOTEIO;
+
+		case DP_AUX_NATIVE_REPLY_DEFER:
+			DRM_DEBUG_KMS("native defer");
+			/*
+			 * We could check for I2C bit rate capabilities and if
+			 * available adjust this interval. We could also be
+			 * more careful with DP-to-legacy adapters where a
+			 * long legacy cable may force very low I2C bit rates.
+			 *
+			 * For now just defer for long enough to hopefully be
+			 * safe for all use-cases.
+			 */
+			usleep_range(500, 600);
+			continue;
+
+		default:
+			DRM_ERROR("invalid native reply %#04x\n", msg->reply);
+			return -EREMOTEIO;
+		}
+
+		switch (msg->reply & DP_AUX_I2C_REPLY_MASK) {
+		case DP_AUX_I2C_REPLY_ACK:
+			/*
+			 * Both native ACK and I2C ACK replies received. We
+			 * can assume the transfer was successful.
+			 */
+			return ret;
+
+		case DP_AUX_I2C_REPLY_NACK:
+			DRM_DEBUG_KMS("I2C nack (result=%d, size=%zu\n", ret, msg->size);
+			aux->i2c_nack_count++;
+			return -EREMOTEIO;
+
+		case DP_AUX_I2C_REPLY_DEFER:
+			DRM_DEBUG_KMS("I2C defer\n");
+			aux->i2c_defer_count++;
+			usleep_range(400, 500);
+			continue;
+
+		default:
+			DRM_ERROR("invalid I2C reply %#04x\n", msg->reply);
+			return -EREMOTEIO;
+		}
+	}
+
+	DRM_DEBUG_KMS("too many retries, giving up\n");
+	return -EREMOTEIO;
+}
+
+/*
+ * Keep retrying drm_dp_i2c_do_msg until all data has been transferred.
+ *
+ * Returns an error code on failure, or a recommended transfer size on success.
+ */
+static int drm_dp_i2c_drain_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *orig_msg)
+{
+	int err, ret = orig_msg->size;
+	struct drm_dp_aux_msg msg = *orig_msg;
+
+	while (msg.size > 0) {
+		err = drm_dp_i2c_do_msg(aux, &msg);
+		if (err <= 0)
+			return err == 0 ? -EPROTO : err;
+
+		if (err < msg.size && err < ret) {
+			DRM_DEBUG_KMS("Partial I2C reply: requested %zu bytes got %d bytes\n",
+				      msg.size, err);
+			ret = err;
+		}
+
+		msg.size -= err;
+		msg.buffer += err;
+	}
+
+	return ret;
+}
+
+/*
+ * Bizlink designed DP->DVI-D Dual Link adapters require the I2C over AUX
+ * packets to be as large as possible. If not, the I2C transactions never
+ * succeed. Hence the default is maximum.
+ */
+static int dp_aux_i2c_transfer_size __read_mostly = DP_AUX_MAX_PAYLOAD_BYTES;
+module_param_unsafe(dp_aux_i2c_transfer_size, int, 0644);
+MODULE_PARM_DESC(dp_aux_i2c_transfer_size,
+		 "Number of bytes to transfer in a single I2C over DP AUX CH message, (1-16, default 16)");
+
+static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
+			   int num)
+{
+	struct drm_dp_aux *aux = adapter->algo_data;
+	unsigned int i, j;
+	unsigned transfer_size;
+	struct drm_dp_aux_msg msg;
+	int err = 0;
+
+	dp_aux_i2c_transfer_size = clamp(dp_aux_i2c_transfer_size, 1, DP_AUX_MAX_PAYLOAD_BYTES);
+
+	memset(&msg, 0, sizeof(msg));
+
+	for (i = 0; i < num; i++) {
+		msg.address = msgs[i].addr;
+		msg.request = (msgs[i].flags & I2C_M_RD) ?
+			DP_AUX_I2C_READ :
+			DP_AUX_I2C_WRITE;
+		msg.request |= DP_AUX_I2C_MOT;
+		/* Send a bare address packet to start the transaction.
+		 * Zero sized messages specify an address only (bare
+		 * address) transaction.
+		 */
+		msg.buffer = NULL;
+		msg.size = 0;
+		err = drm_dp_i2c_do_msg(aux, &msg);
+		if (err < 0)
+			break;
+		/* We want each transaction to be as large as possible, but
+		 * we'll go to smaller sizes if the hardware gives us a
+		 * short reply.
+		 */
+		transfer_size = dp_aux_i2c_transfer_size;
+		for (j = 0; j < msgs[i].len; j += msg.size) {
+			msg.buffer = msgs[i].buf + j;
+			msg.size = min(transfer_size, msgs[i].len - j);
+
+			err = drm_dp_i2c_drain_msg(aux, &msg);
+			if (err < 0)
+				break;
+			transfer_size = err;
+		}
+		if (err < 0)
+			break;
+	}
+	if (err >= 0)
+		err = num;
+	/* Send a bare address packet to close out the transaction.
+	 * Zero sized messages specify an address only (bare
+	 * address) transaction.
+	 */
+	msg.request &= ~DP_AUX_I2C_MOT;
+	msg.buffer = NULL;
+	msg.size = 0;
+	(void)drm_dp_i2c_do_msg(aux, &msg);
+
+	return err;
+}
+
+static const struct i2c_algorithm drm_dp_i2c_algo = {
+	.functionality = drm_dp_i2c_functionality,
+	.master_xfer = drm_dp_i2c_xfer,
+};
+
+/**
+ * drm_dp_aux_register() - initialise and register aux channel
+ * @aux: DisplayPort AUX channel
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int drm_dp_aux_register(struct drm_dp_aux *aux)
+{
+	mutex_init(&aux->hw_mutex);
+
+	aux->ddc.algo = &drm_dp_i2c_algo;
+	aux->ddc.algo_data = aux;
+	aux->ddc.retries = 3;
+
+	aux->ddc.class = I2C_CLASS_DDC;
+	aux->ddc.owner = THIS_MODULE;
+	aux->ddc.dev.parent = aux->dev;
+	aux->ddc.dev.of_node = aux->dev->of_node;
+
+	strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(aux->dev),
+		sizeof(aux->ddc.name));
+
+	return i2c_add_adapter(&aux->ddc);
+}
+EXPORT_SYMBOL(drm_dp_aux_register);
+
+/**
+ * drm_dp_aux_unregister() - unregister an AUX adapter
+ * @aux: DisplayPort AUX channel
+ */
+void drm_dp_aux_unregister(struct drm_dp_aux *aux)
+{
+	i2c_del_adapter(&aux->ddc);
+}
+EXPORT_SYMBOL(drm_dp_aux_unregister);